Acids and Bases

Show all your work.
Box final anwers.
Use the given numbering in order.


1. What is the pH if [H+] = 1 x 10 (-3) ?

2. What is the pOH if [OH-] = 1 x 10 (-8) ?

3. What is the pH if [OH-] = 1 x 10 (-13) ?

4. What is the pOH if [H+] = 1 x 10 (-5) ?

5. What is the [H+] if the pH = 3?

6. What is the [OH-] if the pOH = 2 ?

7. What is the [H+] if the pOH = 13?

8. What is the [OH-] if the pH = 4?

9. What is the [OH-] if the [H+] = 1 x 10 (-4) ?

10. What is the [H+] if the [OH-] = 1 x 10 (-2) ?

11. What is the pOH if the pH = 6?

12. What is the pH if the pOH = 12?

13. A solution has a pH = 4. Is it basic, acidic or neutral?

14. A solution has a pOH = 2. Is it basic, acidic or neutral?

15. What is an indicator?

16. What is the an acid and a base according to Bronsted-Lowery?

When blackworms are collected from an environment with an acidic pH, it is expected that (B) the pulse rate of the blackworms would increase to minimize the effects of acidosis.

Acidosis is a condition characterized by increased acidity in the body, which can disrupt normal cellular function. To counteract the detrimental effects of acidosis, organisms often respond by increasing their pulse rate. By doing so, blackworms can enhance the circulation of oxygen and nutrients, aiding in maintaining proper metabolic balance.

Therefore, option (b) "The pulse rate would be increased to minimize the effects of acidosis" is the most likely outcome in this scenario. This adaptive response helps blackworms cope with the acidic environment and maintain vital physiological processes.

To know more about the acidosis refer here :

https://brainly.com/question/31820827#

#SPJ11

Titan's atmosphere predominantly consists of nitrogen and methane, with traces of other gases, ruling out the possibility of life evolving there in the same manner that it is believed to have done on Earth.

On Earth, nitrogen and oxygen make up the majority of the atmosphere, with traces of other gases. Because they are required for respiration, nitrogen and oxygen are crucial for maintaining life as we know it. On the other hand, no known form of life uses methane, which is a highly reactive and combustible gas. Additionally, any form of life would have a very difficult time surviving on Titan due to its extremely low temperatures, which average around -180°C.

Methane, a greenhouse gas, traps heat from the sun and prevents it from escaping back into space, keeping Titan warmer than the other moons of Saturn. Because it absorbs and then emits infrared radiation, which is the main type of heat energy emitted by the sun, methane is a potent greenhouse gas.

Titan has a far stronger greenhouse effect than Saturn's other moons as a result, which keeps Titan's surface warm. Titan's surface would be significantly colder without the methane greenhouse effect, making it more like the other moons of Saturn.

To know more about greenhouse gases, refer:

https://brainly.com/question/20349818

#SPJ4

Correct question:

Titan is a moon of the planet Saturn Table shows the percentages of the gases in the atmosphere of Titan.  

Percentage of gas in atmosphere (%)

Nitrogen 98

Methane 1

Other gases 0.

Some scientists think that living organisms could have evolved on Titan. Explain why these organisms could not have evolved in the same way that life is thought to have evolved on Earth.

Saturn has other moons. The other moons of Saturn have no atmosphere. Titan is warmer than the other moons of Saturn because its atmosphere contains thegreenhouse gas methane. Explain how this greenhouse gas keeps Titan warmer than the other moons of Saturn.

The reaction is a decomposition reaction

The given reaction is not a redox (oxidation-reduction) reaction because there is no change in oxidation number of any of the atoms in the reaction.

Also, it is not a double replacement reaction as there are no ions or compounds being exchanged between the reactants.

This is a decomposition reaction, where one compound (CF4) is breaking down into two simpler substances (C and F2).

A decomposition reaction is a type of chemical reaction where a single compound breaks down into two or more simpler substances. In a decomposition reaction, a compound is broken down into its constituent elements or simpler compounds.

The reaction can be represented by a chemical equation where the reactant is the compound that is breaking down, and the products are the simpler substances formed as a result of the reaction.

The general formula for a decomposition reaction is:

AB → A + B

where AB is the compound that is decomposing, and A and B are the simpler substances formed as a result of the reaction.

Learn more about decomposition reaction at

https://brainly.com/question/27300160

#SPJ1

Darwin proposed a new theory of how evolution works, which he called "natural selection."

This theory suggests that the species that are best adapted to their environment are more likely to survive and reproduce, passing on their advantageous traits to their offspring. Over time, these advantageous traits become more common in the population, leading to the evolution of new species.

Darwin's theory of natural selection was a revolutionary idea that challenged traditional beliefs about the origin and diversity of life on Earth. Today, it is widely accepted as the mechanism that drives evolution, and has been supported by numerous scientific studies and observations.

Darwin's work continues to inspire new research and discoveries in the field of evolutionary biology, and his legacy as one of the most influential scientists in history remains strong to this day.

To know more about Darwin, visit:

https://brainly.com/question/27812304#

#SPJ11

1) Some creative ways to change people's perception of bugs as pests could include highlighting the nutritional benefits of farming bugs for food, showcasing their role in sustainable agriculture, and promoting insect farming as a way to reduce reliance on traditional livestock farming, which can have negative environmental impacts.

2) There could be negative environmental impacts associated with foraging for and farming bugs such as habitat destruction and pesticide use. Additionally, large-scale insect farming operations could require significant resources like water and feed, potentially contributing to environmental degradation and resource depletion.

3) Insect farming could address some of the problems associated with food insecurity by providing a sustainable source of protein that is affordable and accessible to many communities. Insects require less feed and water than traditional livestock, can be raised in smaller spaces, and have a lower carbon footprint. This makes them a more efficient and sustainable food source, particularly in areas where resources are scarce.

4) Insect farming can address some of the problems associated with food insecurity (repeated question; refer to answer #3).

Learn more about "bugs": https://brainly.com/question/11073037

#SPJ11

233.99 g of Alz(CO₃), should precipitate out in the reaction. ​

To determine the limiting reagent in this reaction, we need to compare the number of moles of each reactant present to the stoichiometric coefficients in the balanced equation. Let's first calculate the number of moles of each reactant:
- 2 moles of AI(NO₃)₃ = 2 x 213.99 g/mol = 427.98 g
- 3 moles of Na₂CO₃ = 3 x 105.99 g/mol = 317.97 g

Next, we need to convert these masses to moles by dividing by their respective molar masses:
- Moles of AI(NO₃)₃ = 427.98 g / 213.99 g/mol = 2.00 mol
- Moles of Na₂CO₃ = 317.97 g / 105.99 g/mol = 3.00 mol

According to the balanced equation, the reaction requires 2 moles of AI(NO₃)₃ for every 3 moles of Na₂CO₃. Since we have an equal number of moles of both reactants, we can see that AI(NO₃)₃ is the limiting reagent. This means that all of the AI(NO₃)₃ will react and determine the amount of product formed.

To determine how many grams of Al₂(CO₃)₃ should precipitate out, we need to calculate the theoretical yield based on the number of moles of AI(NO₃)₃:
- 2 mol of AI(NO₃)₃produces 1 mol of Al₂(CO₃)₃
- 2.00 mol of AI(NO₃)₃ will produce 1.00 mol of Al₂(CO₃)₃

The molar mass of Al2(CO3)3 is 233.99 g/mol, so we can calculate the mass of Al₂(CO₃)₃ formed as follows:
- Mass of Al₂(CO₃)₃ = 1.00 mol x 233.99 g/mol = 233.99 g
Therefore, the theoretical yield of Al₂(CO₃)₃ is 233.99 g.

To know more about limiting reagent :

https://brainly.com/question/26905271

#SPJ11

The mass of carbon monoxide that has been used in the reaction is 5.296 g.

To solve this problem, we need to use stoichiometry which deals with the quantitative relationships between reactants and products in chemical reactions.

The balanced chemical equation for the reaction is:

Fe₂O₃ + 3CO → 2Fe + 3CO₂

This equation tells us that for every 2 moles of Fe₂O₃ and 3 moles of CO that react, we get 2 moles of Fe and 3 moles of CO₂.

We are given the mass of iron that was recovered, and the percentage yield of the reaction. The percentage yield is a measure of how much product is actually obtained compared to the theoretical yield, which is the amount of product that would be obtained if the reaction proceeded to completion.

To calculate the theoretical yield of iron, we need to use stoichiometry and the given amount of carbon monoxide used in the reaction. We can use the following equation to calculate the amount of carbon monoxide used:

n = m/M

where n is the number of moles of carbon monoxide used, m is the mass of iron recovered, and M is the molar mass of iron.

Using the given values, we get:

n = 15.88 g / 55.845 g/mol = 0.2838 mol

This is the number of moles of iron that would be produced if the reaction proceeded to completion.

To calculate the theoretical yield of iron, we can use the stoichiometry of the balanced chemical equation. For every 3 moles of carbon monoxide used, 2 moles of iron are produced. So, the number of moles of carbon monoxide used is:

nCO = (2/3) × n = (2/3) × 0.2838 mol = 0.1892 mol

To calculate the mass of carbon monoxide used, we can use the following equation:

mCO = nCO × MCO

where mCO is the mass of carbon monoxide used, and MCO is the molar mass of carbon monoxide, which is 28.01 g/mol.

Using the given values, we get:

mCO = 0.1892 mol × 28.01 g/mol = 5.296 g

Therefore, the mass of carbon monoxide used in the reaction is 5.296 grams.

Learn more about carbon monoxide at https://brainly.com/question/30048336

#SPJ11

If 33. 55 ml of 0. 150M NaOH neutralizes 0. 579g of HPro then the molar mass of proline is 115.08 g/mol.

To find the molar mass of proline, we need to first calculate the number of moles of HPro that reacted with the NaOH.

We can use the equation:

HPro + NaOH → NaPro + H2O

From the balanced equation, we can see that 1 mole of HPro reacts with 1 mole of NaOH.

Using the concentration and volume of NaOH, we can calculate the number of moles of NaOH used:

moles of NaOH = concentration x volume
moles of NaOH = 0.150 mol/L x 0.03355 L
moles of NaOH = 0.005033 mol

Since 1 mole of HPro reacts with 1 mole of NaOH, the number of moles of HPro used is also 0.005033 mol.

Now we can calculate the molar mass of HPro:

molar mass = mass / moles
molar mass = 0.579 g / 0.005033 mol
molar mass = 115.08 g/mol

Therefore, the molar mass of proline is 115.08 g/mol.

Know more about Amino Acid here:

https://brainly.com/question/28409615

#SPJ11

Rounded to the nearest whole number, y is 42. Therefore, the molecular formula of the hydrocarbon is C4H42.

To find the molecular formula of the hydrocarbon, we first need to determine the molecular weight. We know that the mass ratio between hydrogen and carbon is 1:10, which means that for every 1 gram of hydrogen, there are 10 grams of carbon in the molecule.

Let's assume that we have x number of carbon atoms and y number of hydrogen atoms in the molecule. The molecular weight can then be expressed as:

Molecular weight = (x x atomic weight of carbon) + (y x atomic weight of hydrogen)

Since the mass ratio between hydrogen and carbon is 1:10, we can write:

y = 10x

Now, we can substitute y in the equation for molecular weight:

Molecular weight = (x x atomic weight of carbon) + (10x x atomic weight of hydrogen)

Molecular weight = x(atomic weight of carbon + 10 x atomic weight of hydrogen)

We also know that one liter of hydrogen at 127°C and 1 atm pressure weighs 2.8 g. Using the ideal gas law, we can calculate the number of moles of hydrogen in one liter:

PV = nRT

n = PV/RT

n = (1 atm x 1 L) / (0.0821 L.atm/mol.K x 400 K)

n = 0.0305 mol

The molecular weight of the hydrocarbon can be calculated as follows:

Molecular weight = 2.8 g / 0.0305 mol

Molecular weight = 91.80 g/mol

Now, we can solve for x in the equation for molecular weight:

91.80 g/mol = x(12.01 g/mol + 10 x 1.01 g/mol)

91.80 g/mol = 12.01x + 10.10x

91.80 g/mol = 22.11x

x = 4.15

Since x represents the number of carbon atoms in the molecule, we can round it to the nearest whole number, which is 4. Similarly, y can be calculated as:

y = 10x = 41.5

Rounded to the nearest whole number, y is 42. Therefore, the molecular formula of the hydrocarbon is C4H42.

To know more about molecular formula, visit:

https://brainly.com/question/28647690#

#SPJ11

About 2.0 billion years ago, the atmosphere of the Earth was rich in carbon dioxide and lacked oxygen.  The correct answer is G.

However, over time, photosynthetic organisms like cyanobacteria began to evolve and release oxygen into the atmosphere.

This event, known as the Great Oxygenation Event, fundamentally altered the chemistry of the Earth's atmosphere and allowed for the development of complex organisms. The availability of oxygen facilitated the evolution of aerobic respiration, which allowed for more efficient energy production and the development of complex, multicellular organisms.

Therefore, the primary reason for the development of complex organisms about 2.0 billion years ago was the changes in atmospheric gases, specifically the increase in atmospheric oxygen.

The eruption of volcanoes and the impact of comets may have also played a role in the evolution of life on Earth, but the changes in atmospheric gases were the driving force behind the development of complex organisms.

The correct answer is G.

To know more about atmosphere refer to-

https://brainly.com/question/26767532

#SPJ11

The correct answer is C. 7.0. The isolectric point for this molecule is 7.0.

First, list the pka states that the tripeptide glycylarginylglutamate which can be found

pKa_1 = 2.1

pKa_2 = 4.1

pKa_3 = 9.8

pKa_4 = 12.5

The tripeptide, Ala-Arg_Asp. The three peptide bonds that are derived from the three amino acids are called tripeptides. A few examples of tripeptides are glutathione, Eisenin, GHK-Cu, etc. tripeptides are most commonly used for improving the look of ageing signs in the skin. Now it is necessary to find the isoelectric point (pI)

pl = SUM(pKa_1 + ... + pka_n)/n

pl = (2.1 + 4.1 + 9.8 + 12.5)/4

pl = 7.1 which is approximately 7.0.

The isolectric point for this molecule is 7.0.

To learn more about tripeptide check the link below-

https://brainly.com/question/28295128

#SPJ4

Complete question-

The tripeptide glycylarginylglutamate contains four ionizable groups with pKas of 2.1, 4.1 9.8, and 12.5. Calculate the pI for this molecule.

A. 3.1

B. 6.4

C. 7.0

D. 8.3

E. 7.3

According to a given scenario in the question, A cyclic ketone, such as cyclohexanone, and an,-unsaturated carbonyl molecule, such as acrolein, are needed to perform a Robinson annulation to create

4-methylcyclohexane-1-carboxaldehyde.

A strong base, such as sodium ethoxide, is used to treat the cyclic ketone in the Robinson annulation in order to produce an enolate ion. The -carbon of the enolate and the -carbon of the unsaturated carbonyl compound subsequently create a new carbon-carbon bond as a result of the enolate ion's nucleophilic addition to the,-unsaturated carbonyl molecule. The desired product, in this case, 4-methylcyclohexane-1-carboxaldehyde, is produced by protonating the ensuing intermediate.

To know more about  cyclic ketone, here

brainly.com/question/29756072

#SPJ4

--The complete Question is, What two carbonyl compounds are required to carry out a Robinson annulation to synthesize 4-methylcyclohexane-1-carboxaldehyde? --

The balance and net ionic equation are;

1. Ca (s) + Br2 (l) → CaBr2 (s)

2. HNO3 (aq) + BaCl2 (aq) → Ba(NO3)2 (aq) + 2HCl (aq)

3. C7H16 (l) + 11O2 (g) → 7CO2 (g) + 8H2O (l)

4. balanced equation:Cl2 (g) + 2KI (aq) → 2KCl (aq) + I2 (s),

Net ionic equation:

Cl2 (g) + 2I- (aq) → 2Cl- (aq) + I2 (s)

5. Zn (s) + Ca(NO3)2 (aq) → No reaction (since Ca is less reactive than Zn)

6. 2Na3PO4 (aq) + 3Mg(NO3)2 (aq) → Mg3(PO4)2 (s) + 6NaNO3 (aq)

Net ionic equation: 2PO4^3- (aq) + 3Mg^2+ (aq) → Mg3(PO4)2 (s)

7. 2Al (s) + 3ZnCl2 (aq) → 2AlCl3 (aq) + 3Zn (s)

8. 2Fe2O3 (s) → 4Fe (s) + 3O2 (g)

9. Balanced equation: LiOH (aq) + HCl (aq) → LiCl (aq) + H2O (l)

Net ionic equation: OH- (aq) + H+ (aq) → H2O (l)

10A. Solid sodium in water.

2Na (s) + 2H2O (l) → 2NaOH (aq) + H2 (g)

10B. What would happen if you bring a burning splint to the previous reaction?

10 C - The burning splint would go out (since the H2 produced in the reaction may ignite and cause a "pop" sound, but the burning splint itself would go out).

A balanced equation is a chemical equation with equal numbers of atoms for each element on both sides, following the law of conservation of mass.

A net ionic equation is a simplified version of a balanced equation that only shows species participating in the reaction as ions, excluding spectator ions that remain unchanged throughout the reaction. This highlights the actual chemical changes occurring in the reaction.

Find more exercises on net ionic equation;

https://brainly.com/question/22885959

#SPJ1

The concentration of the stock solution is 0.183 M.

To solve this problem, we can use the equation:

M1V1 = M2V2

where M1 is the concentration of the stock solution, V1 is the volume of the stock solution, M2 is the concentration of the NaOH titrant, and V2 is the volume of the titrant used.

First, we need to calculate the number of moles of NaOH used:

Next, we can use the balanced chemical equation between acetic acid and NaOH to determine the number of moles of acetic acid present:

Now we can calculate the concentration of the stock solution:

Therefore, the concentration of the stock solution is 0.183 M.

To learn more about stock solution, here

https://brainly.com/question/25256765

#SPJ4

The final volume of the gas can be determined using the ideal gas law, which states that pressure multiplied by volume is equal to the number of moles of a gas multiplied by the gas constant and the temperature (PV=nRT).

Since the pressure is constant, the final volume can be determined by simply calculating the ratio of the final temperature (300 K) over the initial temperature (200 K). Thus, the final volume of the gas would be 5L x (300/200) = 7.5L.

This is based on the assumption that the ideal gas law holds true, meaning that the gas particles are well separated, the forces between them are negligible, and the volume occupied by the gas particles is negligible.

This equation works well for most gases at relatively low pressures and temperatures, but it fails to accurately describe some gases in extreme conditions.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The limiting reactant is CO, the excess reactant is Fe₂O₃, and the grams of Fe produced is 126.8 g. when 11.5 g of c are allowed to react with 114.5 g of cu2o, then, 101.7 g of Cu is produced.

The balanced equation for the reaction is;

Fe₂O₃ + 3CO → 2Fe + 3CO₂

To determine the limiting and excess reactants, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation.

First, we need to convert the given mass of Fe₂O₃ to moles;

molar mass of Fe₂O₃ = 2(55.85 g/mol) + 3(16.00 g/mol) = 159.69 g/mol

moles of Fe₂O₃ =185 g / 159.69 g/mol

= 1.16 mol

Next, we need to convert the given number of moles of CO to grams:

molar mass of CO = 12.01 g/mol + 16.00 g/mol

= 28.01 g/mol

mass of CO = 3.4 mol x 28.01 g/mol

= 95 g

Now, we can compare the number of moles of Fe₂O₃ and CO to their stoichiometric ratio in the balanced equation;

Fe₂O₃:CO = 1:3

moles of CO needed = 3 x 1.16 mol = 3.48 mol

Since we only have 3.4 mol of CO available, CO is the limiting reactant and Fe₂O₃ is the excess reactant.

To calculate the grams of Fe produced, we need to use the amount of limiting reactant (CO) as the basis for the calculation;

moles of Fe produced = (3.4 mol CO) x (2 mol Fe / 3 mol CO)

= 2.27 mol Fe

molar mass of Fe = 55.85 g/mol

mass of Fe produced = (2.27 mol Fe) x (55.85 g/mol) = 126.8 g Fe

Therefore, the limiting reactant is CO, the excess reactant is Fe₂O₃, and the grams of Fe produced is 126.8 g.

The balanced equation for the reaction is;

Cu₂O + C → 2Cu + CO₂

To determine the grams of Cu produced, we need to first identify the limiting reactant.

First, we need to convert the given masses of C and Cu₂O to moles;

molar mass of C = 12.01 g/mol

moles of C = 11.5 g / 12.01 g/mol = 0.958 mol

molar mass of Cu₂O = 2(63.55 g/mol) + 16.00 g/mol

= 143.10 g/mol

moles of Cu₂O = 114.5 g / 143.10 g/mol

= 0.800 mol

Next, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation;

Cu₂O:C = 1:1

Since we have 0.958 mol of C and 0.800 mol of Cu₂O, Cu₂O is the limiting reactant.

To calculate the grams of Cu produced, we need to use the amount of limiting reactant (Cu₂O) as the basis for the calculation:

moles of Cu produced = (0.800 mol Cu₂O) x (2 mol Cu / 1 mol Cu₂O) = 1.60 mol Cu

molar mass of Cu = 63.55 g/mol

mass of Cu produced = (1.60 mol Cu) x (63.55 g/mol) = 101.7 g Cu

Therefore, 101.7 g of Cu is produced.

To know more about limiting reactant here

https://brainly.com/question/2948214

#SPJ4

Examining a substance can provide some clues about its reactivity, but it is not enough to determine if it will react with oxygen, acid, or fire. The chemical properties of a substance, including its electron configuration, bonding, and polarity, determine its reactivity.

Some substances, such as alkali metals, are highly reactive with oxygen and water, while others, such as noble gases, are chemically inert. Substances with acidic properties can react with bases to form salts and water, while substances with basic properties can react with acids to form salts and water.

Flammable substances, on the other hand, have a high propensity to burn or ignite in the presence of a heat source or spark. Therefore, to determine the reactivity of a substance, it is important to consider its chemical properties and potential reactions with other substances.

To know more about the chemical properties refer here :

https://brainly.com/question/1935242#

#SPJ11

The limiting reactant in the chemical reaction is O₂ because because the O₂ contains the higher starting mass. The correct option is D.

The chemical equation is as :

2H₂ + O₂  --->  2H₂O

The mass of the H₂  = 0.4 g

The molar mass of the H₂  = 2 g/mol

The moles of the H₂  = mass / molar mass

The moles of the H₂  = 0.4 / 2

The moles of the H₂  = 0.2 mol

The mass of the O₂  = 1.8 g

The molar mass of the O₂  = 32 g/mol

The moles of the O₂  = mass / molar mass

The moles of the O₂  = 1.8 / 32

The moles of the O₂  = 0.056 mol

2 moles of H₂  react with 1 mol of O₂

0.056 mol of O₂ react with = 2 × 0.056 = 0.112 mol of H₂

The O₂ is the limiting reactant. The correct option is D.

To learn more about limiting reactant here

https://brainly.com/question/31897248

#SPJ1

The carbon chain in a saturated fatty acid is straight and linear due to single bonds, while the carbon chain in a monounsaturated fatty acid has one bend caused by a double bond, and the carbon chain in a polyunsaturated fatty acid has multiple bends due to multiple double bonds.

Compare the shape of the carbon chain in a saturated fatty acid, a monounsaturated fatty acid, and a polyunsaturated fatty acid.
1. Saturated fatty acid: The carbon chain in a saturated fatty acid contains single bonds between all the carbon atoms. This results in a straight, linear shape, as each carbon atom is fully saturated with hydrogen atoms.

2. Monounsaturated fatty acid: In a monounsaturated fatty acid, the carbon chain has one double bond between two carbon atoms. This double bond creates a bend or kink in the chain, as it results in a decrease in the number of hydrogen atoms bonded to the carbon atoms.

3. Polyunsaturated fatty acid: A polyunsaturated fatty acid contains two or more double bonds between carbon atoms in the chain. Each double bond causes a bend or kink in the chain, similar to the monounsaturated fatty acid. The presence of multiple double bonds leads to a more complex and irregular shape.

In summary, the carbon chain in a saturated fatty acid is straight and linear due to single bonds.

To know more about Polyunsaturated fatty acid:

https://brainly.com/question/12409149

#SPJ11

The standard potential for this cell at 25°C is +0.77 V.

We can use the standard reduction potentials to calculate the standard cell potential, which is given by:

E°cell = E°reduction (cathode) - E°reduction (anode)

The reduction half-reactions for nickel and copper ions are:

E°red = -0.25 V for Ni2+(aq) + 2e- Ni(s).

Cu+(aq) + e- → Cu(s) E°red = +0.52 V

Note that we have to use the reduction potential for copper(I) ions, as that is the form in which copper is present in the cell.

When we enter the values into the formula, we obtain:

E°cell = +0.52 V - (-0.25 V)

E°cell = +0.77 V

Therefore, the standard potential for this cell at 25°C is +0.77 V.

To learn more about Potential :

brainly.com/question/27393410

#SPJ4

The volume of the gas at 333.0°C is 24.5 L. To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas.

The combined gas law is expressed as:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gas.

In this case, we know that the initial volume V₁ is 12.0 L and the initial temperature T₁ is 25°C. We want to find the final volume V₂ when the temperature is 333.0°C. We also know that the pressure remains constant.

To use the combined gas law, we need to convert the temperatures to the absolute scale (Kelvin) by adding 273.15 to each temperature. So, T₁ = 298.15 K and T₂ = 606.15 K.

Plugging in the values into the equation, we get:

(P₁V₁)/T₁ = (P₂V₂)/T₂

(P₁ x 12.0)/298.15 = (P₂ x V₂)/606.15

Since the pressure is constant, we can simplify the equation to:

V₂ = (P₁ x V₁ x T₂)/(T₁ x P₂)

Substituting the values, we get:

V₂ = (1 x 12.0 x 606.15)/(298.15 x 1)

V₂ = 24.5 L

Therefore, the volume of the gas at 333.0°C is 24.5 L.

To know more about combined gas law, visit:

https://brainly.com/question/30458409

#SPJ1

Therefore the correct answer is A. 75.5%. The %purity of the

[tex]Mg(OH)_2 + 2HCl + MgCl_2 + 2H_2O HCI + NaOH + NaCl + H_2O[/tex] is 75.5%.

First, we need to calculate the amount of [tex]HCl[/tex] that reacted with the [tex]Mg(OH)_2[/tex]:

0.120 mol/L [tex]HCl[/tex] x 0.0500 L = 0.00600 mol [tex]HCl[/tex]

From the balanced equation, we know that 1 mole of [tex]Mg(OH)_2[/tex] reacts with 2 moles of [tex]HCl[/tex], so:

0.00600 mol [tex]HCl[/tex] x (1 mol [tex]Mg(OH)_2[/tex] / 2 mol [tex]HCl[/tex]) = 0.00300 mol [tex]Mg(OH)_2[/tex]

Next, we need to calculate the amount of [tex]NaOH[/tex] used in the back-titration:

0.095 mol/L [tex]NaOH[/tex] x 0.00376 L = 0.0003572 mol [tex]NaOH[/tex]

Since the amount of [tex]NaOH[/tex] used is equal to the amount of excess [tex]HCl[/tex], we can use this value to calculate the amount of [tex]HCl[/tex] that reacted with the [tex]Mg(OH)_2[/tex]:

0.0003572 mol [tex]NaOH[/tex] x (1 mol [tex]HCl[/tex] / 1 mol [tex]NaOH[/tex]) = 0.0003572 mol [tex]HCl[/tex]

The amount of [tex]Mg(OH)_2[/tex] that reacted with the [tex]HCl[/tex] is therefore:

0.00300 mol - 0.0003572 mol = 0.00264 mol [tex]Mg(OH)_2[/tex]

The mass of the [tex]Mg(OH)_2[/tex] sample is:

218 g / 58.32 g/mol = 3.741 mol [tex]Mg(OH)_2[/tex]

Therefore, the percent purity of the [tex]Mg(OH)_2[/tex] is:

(0.00264 mol / 3.741 mol) x 100% = 0.0705 x 100% = 7.05%

Therefore the correct answer is A. 75.5%.

Learn more about Magnesium hydroxide at

brainly.com/question/21904397

#SPJ4

Approximately 108,066 J of heat is required to heat 352 g of water from 20.0°C to 93.7°C in an electric kettle.

To determine the quantity of heat required to heat 352 g of water from 20.0°C to 93.7°C, we need to use the specific heat capacity of water and the equation:

q = m × c × ΔT

ΔT = change in temperature (in °C)

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 93.7°C - 20.0°C

ΔT = 73.7°C

Substituting the given values into the equation, we get:

q = 352 g × 4.184 J/g·°C × 73.7°C

q = 108,066.496 J

q ≈ 108,066 J (rounded to three significant figures)

To know more about initial temperature, here

brainly.com/question/31702242

#SPJ4

The correct answer is option e. 3.075 m/s. Speed is a scalar quantity, which means it has only magnitude and no direction.

What is Speed?

Speed is a measure of how quickly something moves from one place to another. It is the rate at which an object covers distance over time, and is usually expressed in units of meters per second (m/s) or kilometers per hour (km/h).

Since the temperature and pressure are the same for both oxygen and hydrogen gas, the only difference between the two is their molar mass. The molar mass of oxygen is 32 g/mol, and the molar mass of hydrogen is 2 g/mol. Therefore, we can calculate the RMS speed of hydrogen as:

u = √(3RT/M) = √(3RT/2)

The RMS speed of oxygen is given as 12.3 m/s. To find the RMS speed of hydrogen, we need to calculate the ratio of their speeds:

u(H2)/u(O2) = √(M(O2)/M(H2)) = √(32/2) = √16 = 4

Therefore, the RMS speed of hydrogen is:

u(H2) = u(O2)/4 = 12.3/4 = 3.075 m/s

Learn more about Speed, visit;

https://brainly.com/question/13943409

#SPJ4

An exothermic reaction is spontaneous if the overall Gibbs free energy change (ΔG) is negative, indicating that the reaction is energetically favorable and will proceed without an external energy input. However, an exothermic reaction can become non-spontaneous under certain circumstances.

One such circumstance is when the entropy change (ΔS) is negative. If ΔH is negative (exothermic) but ΔS is also negative (decrease in disorder), the value of ΔG could still be positive (non-spontaneous) or close to zero (at equilibrium) at temperatures where ΔH is not sufficiently large to overcome the negative ΔS.

This means that even though energy is released during the reaction, the decrease in disorder can make the reaction unfavorable.

Another circumstance is when the reactants are in a highly ordered or low-energy state, and the products are in a highly disordered or high-energy state. In such cases, the enthalpy change (ΔH) may be negative (exothermic), but the entropy change (ΔS) is also positive, and the resulting ΔG value may still be positive, making the reaction non-spontaneous.

To know more about exothermic reaction refer to-

https://brainly.com/question/10373907

#SPJ11

Answer:

C

Explanation:

First of all, the law of conservation of matter states that " In an ordinary chemical reaction, the mass of the products is equal to the mass of the reactants."

So, the answer should be C since the mass of Al and O₂ is equal on both the reactant's and product's side.

4Al + 3O₂ → 2Al₂O₃

Reactants Side: 4 aluminum and 6(3*2) oxygen

Products Side: 4(2*2) aluminum and 6(2*3) oxygen

The empirical formula for acetylene (C₂H₂) is also C₂H₂, while the empirical formula for styrene (C₈H₈) is CH. The empirical formula is useful in the lab for quickly identifying the simplest ratio of atoms in a compound.

To determine the empirical formula of a compound, we need to find the simplest whole-number ratio of the atoms present in the compound. For acetylene (C₂H₂), the ratio is 1:1 for carbon and hydrogen, so the empirical formula is also C₂H₂.

For styrene (C₈H₈), the ratio of carbon to hydrogen is 1:1, so the empirical formula is CH.

The empirical formula can be useful in the lab setting as a quick way to identify the simplest ratio of atoms in a compound, which can help in determining reaction stoichiometry and other practical applications.

However, it may not be useful for predicting the properties or functions of a material, as it does not provide information about the molecular structure or bonding present in the compound.

For example, while acetylene and styrene have the same empirical formula (CH), they have very different chemical and physical properties due to their different molecular structures and bonding.

To know more about empirical formula, refer here:

https://brainly.com/question/14044066#

#SPJ11

The  name of the alkyne is 3-ethyl-4-methyl-5-(prop-1-en-2-yl)oct-2-yne.

ch3

|

ch3ch2c = cch2ch2chch3

Alkyne is a type of organic compounds that contain carbon to carbon triple bond. Alkynes are unsaturated hydrocarbon because they have fewer hydrogens than corresponding alkenes.

The general formula for alkynes is cnH2n -2 where n is the number of carbon in the compound. This means alkynes has fewer two hydrogens than corresponding alkenes.

Therefore, the carbon carbon triple bond in alkynes is composed of one sigma bond and two pi bond in the orbitals.

Learn more about alkyne below.

https://brainly.com/question/22933069

#SPJ1

In the reaction 2Fe3+(aq) + 2Hg(l) + 2Cl−(aq) → 2Fe2+(aq) + Hg2Cl2(s), the species that loses electrons is Hg(l).

Here, mercury (Hg) undergoes oxidation, changing from Hg(l) to Hg2Cl2(s), and in the process, it loses electrons to form a bond with Cl− ions.

Hg(0)     →        Hg(+1)    +      1 e-

And Iron undergoes reduction, Fe3+ (aq) accepts one electron to become Fe2+ (aq).

Fe(+3)    +      1 e-      →       Fe(+2)

To know more about oxidation and reduction, click below.

https://brainly.com/question/28216195?

#SPJ11

Area of one tire is: 20.8 square centimeters.

To find the area of one tire in contact with the road, we need to first determine the total pressure exerted by all tires. Assuming the truck has 4 tires, we can use the following formula:

Total weight (in pounds) = Pressure exerted by each tire (in pounds per square centimeter) × Total area of contact of all tires (in square centimeters)

Let's denote the area of one tire in contact with the road as A (in square centimeters). Then, the total area of contact of all tires would be 4A.

We can now plug in the values given:

7280 pounds = 87.5 pounds/square centimeter × 4A

To find A, we first divide both sides by 4:

1820 pounds = 87.5 pounds/square centimeter × A

Now, divide both sides by 87.5 pounds/square centimeter:

A ≈ 20.8 square centimeters

The area of one tire in contact with the road is approximately 20.8 square centimeters.

To know more about area-pressure calculation:

https://brainly.in/question/20711424

#SPJ11