The sum of -1310 and (-29)10 is -1339. The sum in decimal is 14. The binary equivalent of -13 is 0011. The sum in decimal is 14.
To add -1310 and (-29)10, we can simply perform the addition operation.
-1310
(-29)10
-1339
Therefore, the sum of -1310 and (-29)10 is -1339.
To find the binary equivalent of -13, we can use the two's complement representation.
The binary equivalent of 13 is 1101. To find the binary equivalent of -13, we invert the bits (change 1s to 0s and 0s to 1s) and add 1 to the result.
Inverting the bits of 1101, we get 0010. Adding 1 to 0010, we obtain 0011.
Therefore, the binary equivalent of -13 is 0011.
Similarly, to find the binary equivalent of -29, we follow the same process.
The binary equivalent of 29 is 11101. Inverting the bits, we get 00010. Adding 1 to 00010, we obtain 00011.
Therefore, the binary equivalent of -29 is 00011.
To find the sum in binary, we can add the binary representations of -13 and -29:
0011 + 00011 = 001110
Therefore, the sum in binary is 001110.
To convert the sum in binary to decimal, we can evaluate its decimal value:
001110 in binary is equivalent to 14 in decimal.
Therefore, the sum in decimal is 14.
To know more about binary equivalent:
https://brainly.com/question/68067
#SPJ4
If S = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9; and A= (0, 2, 4, 6, 8), B = (1, 3, 5, 7, 9), C = {2, 3, 4, 5), and D = {1, 6, 7), list the elements of the sets corresponding to the following events: (a) AUC; (b) An B; (c) C'; (d) (C'n D) UB; (e) (SNC)' (1) ANCND'.
The elements of AUC are {0, 2, 4, 6, 8, 2, 3, 4, 5}, the elements of An B are {} or Ø, the elements of C' are {0, 1, 6, 7, 8, 9}, the elements of C'n DUB are {1, 6, 7}, and the elements of (SNC)'(1) are {2, 3, 4, 5}.
Sets:
A = {0, 2, 4, 6, 8},
B = {1, 3, 5, 7, 9},
C = {2, 3, 4, 5},
D = {1, 6, 7},
S = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}.
a) AUC is a union of two sets A and C.
Therefore, the elements of AUC are {0, 2, 4, 6, 8, 2, 3, 4, 5}, which can be written as {0, 2, 4, 6, 8, 3, 5, 4}.
b) An B is the intersection of A and B.
Thus, the elements of An B are {} or Ø.
c) C' is the complement of the set C concerning S.
Therefore, the elements of C' are {0, 1, 6, 7, 8, 9}.
d) C'n D is the intersection of two sets C and D.
Therefore, the elements of C'n D are {}. C'n DUB is the union of {} and D. Therefore, the elements of C'n DUB are {1, 6, 7}.
e) The complement of set C is {0, 1, 6, 7, 8, 9}.
Therefore, (SNC)' is {0, 1, 6, 7, 8, 9} and (SNC)'(1) is the complement of {0, 1, 6, 7, 8, 9} concerning S, which is {2, 3, 4, 5}.
In this question, we have learned about different sets like A, B, C, D, and S. The elements of AUC are {0, 2, 4, 6, 8, 2, 3, 4, 5}, the elements of An B are {} or Ø, the elements of C' are {0, 1, 6, 7, 8, 9}, the elements of C'n DUB are {1, 6, 7}, and the elements of (SNC)'(1) are {2, 3, 4, 5}.
To know more about the sets, visit:
brainly.com/question/31447621
#SPJ11
On a map where each unit represents 100 miles, two airports are located at P(1,17) and Q(12,10). What is the distance, to the nearest whole mile, between the two airports?
The distance between the two airports, to the nearest whole mile, is 13 miles.
To find the distance between two points on a map, you can use the distance formula. The distance formula is derived from the Pythagorean theorem and is given by:
Distance = √((x2 - x1)^2 + (y2 - y1)^2)
In this case, the coordinates of the two airports are P(1,17) and Q(12,10). Using these coordinates, we can calculate the distance between them.
x1 = 1
y1 = 17
x2 = 12
y2 = 10
Distance = √((12 - 1)^2 + (10 - 17)^2)
Distance = √(11^2 + (-7)^2)
Distance = √(121 + 49)
Distance = √170
Distance ≈ 13.04
Since each unit on the map represents 100 miles, the distance between the two airports is approximately 13.04 units. Rounding to the nearest whole mile, the distance is 13 miles.
for similar questions on airports.
https://brainly.com/question/31675873
#SPJ8
Consider the function z = x² cos(2y) - when (x, y) = (1, π). 3 . Find the tangent plane to the surface
The tangent plane to the surface z = x² cos(2y) - at the point (1, π) is given by the equation z = -1 + 2x - 2y.
The tangent plane to a surface at a point is defined as the plane that best approximates the surface at that point. In this case, we can find the tangent plane by taking the partial derivatives of z with respect to x and y, and evaluating them at the point (1, π).
The partial derivative of z with respect to x is 2x cos(2y). When x = 1 and y = π, this value is 2. The partial derivative of z with respect to y is -2 sin(2y). When x = 1 and y = π, this value is -2.
The equation of the tangent plane is therefore given by:
```
z = z(1, π) + 2x(x - 1) - 2y(y - π)
```
Plugging in z(1, π) = -1, we get the equation:
```
z = -1 + 2x - 2y
```
This is the equation of the tangent plane to the surface z = x² cos(2y) - at the point (1, π).
Learn more about tangent plane here:
brainly.com/question/30565764
#SPJ11
Find solutions for your homework
Find solutions for your homework
mathcalculuscalculus questions and answers1. the hyperbolic functions cosh and sinh are defined by the formulas e² e cosh(z) e² te 2 sinh(r) 2 the functions tanh, coth, sech and esch are defined in terms of cosh and sinh analogously to how they are for trigonometric functions: tanh(r)= sinh(r) cosh(z)' coth(z) = cosh(z) sinh(r) sech(z) 1 cosh(z)' csch(z) = sinh(r) (a) find formulas for the
This problem has been solved!
You'll get a detailed solution from a subject matter expert that helps you learn core concepts.
See Answer
Question: 1. The Hyperbolic Functions Cosh And Sinh Are Defined By The Formulas E² E Cosh(Z) E² Te 2 Sinh(R) 2 The Functions Tanh, Coth, Sech And Esch Are Defined In Terms Of Cosh And Sinh Analogously To How They Are For Trigonometric Functions: Tanh(R)= Sinh(R) Cosh(Z)' Coth(Z) = Cosh(Z) Sinh(R) Sech(Z) 1 Cosh(Z)' Csch(Z) = Sinh(R) (A) Find Formulas For The
1. The hyperbolic functions cosh and sinh are defined by the formulas
e² e
cosh(z)
e² te
2
sinh(r)
2
The functions tanh, coth
Show transcribed image text
Expert Answer
answer image blur
Transcribed image text: 1. The hyperbolic functions cosh and sinh are defined by the formulas e² e cosh(z) e² te 2 sinh(r) 2 The functions tanh, coth, sech and esch are defined in terms of cosh and sinh analogously to how they are for trigonometric functions: tanh(r)= sinh(r) cosh(z)' coth(z) = cosh(z) sinh(r) sech(z) 1 cosh(z)' csch(z) = sinh(r) (a) Find formulas for the derivatives of all six of these functions. You must show all of your work. (b) The function sinh is one-to-one on R, and its range is R, so it has an inverse defined on R, which we call arcsinh. Use implicit differentiation to prove that 1 (arcsinh(r)) = x² + =
a) Derivatives of all six functions are found.
b) Sinh is one-to-one , so it has an inverse defined on R which is proved.
Given,
Hyperbolic functions are cosh and sinh
[tex]e^2 + e^(-2) / 2 = cosh(z),[/tex]
[tex]e^2 - e^(-2) / 2 = sinh(z)[/tex]
The functions tanh, coth, sech, and csch :
tanh(z) = sinh(z) / cosh(z)
[tex]= (e^2 - e^(-2)) / (e^2 + e^(-2))[/tex]
coth(z) = cosh(z) / sinh(z)
[tex]= (e^2 + e^(-2)) / (e^2 - e^(-2))[/tex]
sech(z) = 1 / cosh(z) = 2 / [tex](e^2 + e^(-2))[/tex]
csch(z) = 1 / sinh(z) = 2 / [tex](e^2 - e^(-2))[/tex]
a) Derivatives of all six functions are as follows;
Coth(z)' = - csch²(z)
Sech(z)' = - sech(z) tanh(z)
Csch(z)' = - csch(z) coth(z)
Cosh(z)' = sinh(z)
Sinh(z)' = cosh(z)
Tanh(z)' = sech²(z)
b) Sinh is one-to-one on R, and its range is R,
It has an inverse defined on R, which we call arcsinh.
Let y = arcsinh(r) then, sinh(y) = r
Differentiating with respect to x,
cosh(y) (dy/dx) = 1 / √(r² + 1)dy/dx
= 1 / (cosh(y) √(r² + 1))
Substitute sinh(y) = r, and
cosh(y) = √(r² + 1) / r in dy/dx(dy/dx)
= 1 / (√(r² + 1) √(r² + 1) / r)
= r / (r² + 1)
Hence proved.
Know ore about the Hyperbolic functions
https://brainly.com/question/31397796
#SPJ11
Solve the given differential equation by using an appropriate substitution. The DE is homogeneous. dy y-x m dx y + x
The given homogeneous differential equation can be solved by substituting y = ux. This leads to a separable differential equation in terms of u and x, which can be solved to obtain the general solution.
To solve the homogeneous differential equation, we can make the substitution y = ux, where u is a new variable. We then differentiate both sides of the equation with respect to x and substitute the values of dy/dx and y in terms of u and x.
This leads to a separable differential equation in terms of u and x. Solving this new equation will give us the general solution in terms of u and x. Finally, substituting y = ux back into the general solution will give the solution to the original differential equation.
To learn more about homogeneous differential equation click here:
brainly.com/question/30624850
#SPJ11
Below you are given the graphs of two functions: a(z) and b(x). Use the graphs to compute the required derivatives, when possible. Show every step of your computations. If it is not possible to find the value of one of these derivatives, carefully explain why. 5 5 4 4 3 b (x) 2 2 a (x) 1 1 ➜ -5 -4 -3 -2 -¹1, 2 3 4 -5 -4 -3 -2 -¹₁ 3 2 -2 -3 -5 -3 -4 -5 1 5 ८७ 1 2 4 5 Find the value of the derivative of b(a(z)) at x = -1. Find the value of the derivative of a(sin(x)) at x = 0.
The value of the derivative of b(a(z)) at x = -1 is 0. The value of the derivative of a(sin(x)) at x = 0 cannot be determined without additional information or the equation for a(x).
To find the value of the derivative of b(a(z)) at x = -1, we need to evaluate the composition of functions b(x) and a(z) and then differentiate it with respect to x.
Step 1: Evaluate a(z) at z = x = -1:
From the first graph, we can see that a(-1) = -2.
Step 2: Evaluate b(a(z)) at x = -1:
Since a(-1) = -2, we need to find the value of b(-2) from the second graph. According to the second graph, for x < 0, y = 2. Therefore, b(-2) = 2.
Step 3: Find the derivative of b(a(z)) with respect to x:
To find the derivative of b(a(z)) at x = -1, we need to find d(b(a(z)))/dx.
Since b(a(z)) = b(-2) = 2 (a constant value), the derivative of a constant is always zero.
Therefore, the value of the derivative of b(a(z)) at x = -1 is 0.
Now let's move on to the next derivative.
To find the value of the derivative of a(sin(x)) at x = 0, we need to differentiate the composition of functions a(x) and sin(x) and then evaluate it at x = 0.
Step 1: Evaluate a(x) at x = 0:From the first graph, we can see that a(0) is not directly given by the given points. Without additional information or a specific equation for a(x), we cannot determine the value of a(0).
Step 2: Evaluate a(sin(x)) at x = 0:
Since sin(0) = 0, we need to find the value of a(0) from the first graph, which is not possible without further information.
Step 3: Find the derivative of a(sin(x)) with respect to x:
To find the derivative of a(sin(x)), we need to know the equation or have additional information about the function a(x). Without this information, we cannot calculate the derivative of a(sin(x)) at x = 0.
Therefore, the value of the derivative of a(sin(x)) at x = 0 cannot be determined without additional information or the equation for a(x).
Learn more about derivative here: https://brainly.com/question/32963989
#SPJ11
The complete question is:
Below you are given the graphs of two functions: a(z) and b(x). Use the graphs to compute the required derivatives, when possible. Show every step of your computations. If it is not possible to find the value of one of these derivatives, carefully explain why. 5 Find the value of the derivative of b(a(z)) at x = -1. Find the value of the derivative of a(sin(x)) at x = 0.
Suppose customers in a hardware store are willing to buy N(p) boxes of nails at p dollars per box, as given by the following function. N(p) = 100-4p²; 1 sps4 CARA a. Find the average rate of change of demand for a change in price from $2 to $3. The average rate of change of demand for a change in price from $2 to $3 is (Type an integer or a decimal.) boxes per dollar. b. Find the instantaneous rate of change of demand when the price is $2. The instantaneous rate of change of demand when the price is $2 is (Type an integer or a decimal.) boxes per dollar. c. Find the instantaneous rate of change of demand when the price is $3. The instantaneous rate of change of demand when the price is $3 is boxes per dollar. (Type an integer or a decimal.)
a) The average rate of change of demand for a change in price from $2 to $3 is -20 boxes per dollar.
b) The instantaneous rate of change of demand when the price is $2 is -16 boxes per dollar.
c) The instantaneous rate of change of demand when the price is $3 is -24 boxes per dollar.
a) We have the following formula:
N(p) = 100 - 4p²
We need to find the average rate of change of demand for a change in price from $2 to $3. Therefore, we need to find N(3) and N(2) and use the average rate of change formula:
Average rate of change = (N(3) - N(2)) / (3 - 2)To find N(3),
we substitute p = 3 in the formula:
N(3) = 100 - 4(3)²= 100 - 4(9)= 100 - 36= 64To find N(2),
we substitute p = 2 in the formula:
N(2) = 100 - 4(2)²= 100 - 4(4)= 100 - 16= 84
Now we can substitute these values in the formula for the average rate of change:
Average rate of change
= (N(3) - N(2)) / (3 - 2)= (64 - 84) / 1
= -20
Therefore, the average rate of change of demand for a change in price from $2 to $3 is -20 boxes per dollar.
b) To find the instantaneous rate of change of demand when the price is $2, we need to find the derivative of the demand function N(p) = 100 - 4p²:N'(p)
= dN/dp = -8p
We need to find N'(2):
N'(2) = -8(2)= -16
Therefore, the instantaneous rate of change of demand when the price is $2 is -16 boxes per dollar
c) To find the instantaneous rate of change of demand when the price is $3, we need to find N'(p) and substitute p = 3:N'(p)
= dN/dp
= -8pN'(3)
= -8(3)
= -24
Therefore, the instantaneous rate of change of demand when the price is $3 is -24 boxes per dollar.
a) The average rate of change of demand for a change in price from $2 to $3 is -20 boxes per dollar.
b) The instantaneous rate of change of demand when the price is $2 is -16 boxes per dollar.
c) The instantaneous rate of change of demand when the price is $3 is -24 boxes per dollar.
learn more about instantaneous rate here
https://brainly.com/question/28684440
#SPJ11
If a linear transformation T: R6 → R5 is one-to-one, then ***** a) the rank is 5 and the nullity is 1. b) the rank is 1 and the nullity is 5. c) the rank is 5 and the nullity is 0. d) the situation is impossible.
If a linear transformation T: R^6 → R^5 is one-to-one, then the correct option is (c) the rank is 5 and the nullity is 0.
A linear transformation T: R^6 → R^5 being one-to-one means that each input vector in R^6 maps to a distinct output vector in R^5. In other words, no two different vectors in R^6 get mapped to the same vector in R^5.
The rank of a linear transformation represents the dimension of the vector space spanned by the transformed vectors. Since T is one-to-one, it means that all the vectors in R^6 are linearly independent in the image of T, which is R^5. Hence, the rank of T is equal to the dimension of the image, which is 5.
The nullity of a linear transformation represents the dimension of the null space, which consists of all the vectors in the domain that get mapped to the zero vector in the codomain. Since T is one-to-one, it means that the only vector that gets mapped to the zero vector is the zero vector itself. Therefore, the nullity of T is 0.
Hence, the correct option is (c) the rank is 5 and the nullity is 0.
To learn more about linear transformation click here : brainly.com/question/13595405
#SPJ11
Each of Exercises 15–30 gives a function f(x) and numbers L, c, and & > 0. In each case, find an open interval about c on which the inequal- ity f(x) - L < & holds. Then give a value for 8 >0 such that for all x satisfying 0 < x − c < 8 the inequality |f(x) − L| < ɛ holds. 20. f(x)=√x - 7. L = 4, c = 23, ε = 1
The value of ɛ = 1 is true for this interval as -1 < 1 for the function.
Given that the function is f(x) = [tex]\sqrt{x}[/tex]- 7, L = 4, c = 23, ε = 1
A function is a rule or relationship that gives each input value in mathematics a specific output value. It explains the connections between elements in one set (the domain) and those in another set (the codomain or range). Usually, a mathematical statement, equation, or graph is used to depict a function.
The mathematical operations that make up a function can be linear, quadratic, exponential, trigonometric, logarithmic, or any combination of these. They are employed to simulate actual events, resolve mathematical problems, examine data, and create forecasts. Functions are crucial to many areas of mathematics, such as algebra, calculus, and statistics. They also have a wide range of uses in science, engineering, and the economy.
We need to find an open interval about c on which the inequality f(x) - L < ε holds. Now let's proceed as follows:
Step 1To find an open interval around c, we have to solve the inequality:f(x) - L < εf(x) - 4 < 1
Step 2Substitute f(x) with the function and solve for x.f(x) = [tex]√x - 7√x - 7 - 4 < 1√x - 11 < 1√x < 12x < 144[/tex]
Step 3Therefore, the open interval around c = 23 that satisfies f(x) - L < ε is(23 - 144, 23 + 144) = (-121, 167)
Step 4To find a value for ɛ > 0, we have to solve the inequality:|f(x) -[tex]L| < ɛ|√x - 7 - 4| < 1|√x - 3| < 1[/tex]
We want to make the term inside the absolute value less than ɛ by restricting x in a certain interval. The value of ɛ is determined by this interval. The expression inside the absolute value is less than ɛ if it is between -ɛ and ɛ. We have|[tex]\sqrt{3}[/tex] - 3| < 1Let ɛ = 1. So we have-1 < [tex]\sqrt{3}[/tex]- 3 < 1
Add 3 to all parts of the inequality2 < [tex]\sqrt{x}[/tex] < 4
Square all parts: 4 < x < 16
So, for 0 < x - 23 < 8, we get -1 < [tex]\sqrt{x}[/tex] - 3 < 1.
Therefore, the value of ɛ = 1 is true for this interval as -1 < 1.
Learn more about function here:
https://brainly.com/question/30721594
#SPJ11
Knowing that over a 1-year period 17% of cars will need to be repaired once, 7% will need to be repaired twice, and 4% will require three or more repairs, if you own two cars, what is the probability that STATISTICS-PROBABILITY & SET THEORY HOMEWORK 16) Knowing that over a 1-year period 17% of cars will need to be repaired once, 7% will need to be repaired twice, and 4% will require three or more repairs, if you own two cars, what is the probability that c) at least one car will need repair? a) neither will need repair? b) both will need repair
The probability that at least one car will need repair is approximately 0.3171, the probability that neither car will need repair is approximately 0.6889, and the probability that both cars will need repair is approximately 0.0289.
c) The probability that at least one car will need repair can be found by calculating the complement of the probability that neither car will need repair. Since the probability that neither car will need repair is the product of the probabilities that each car does not need repair, we have:
P(at least one car needs repair) = 1 - P(neither car needs repair) = 1 - (0.83)²
≈ 0.3171
So, the probability that at least one car will need repair is approximately 0.3171.
a) The probability that neither car will need repair is the product of the probabilities that each car does not need repair:
P(neither car needs repair) = 0.83²
≈ 0.6889
So, the probability that neither car will need repair is approximately 0.6889.
b) The probability that both cars will need repair is the product of the probabilities that each car needs repair:
P(both cars need repair) = 0.17²
≈ 0.0289
So, the probability that both cars will need repair is approximately 0.0289.
To know more about probability,
https://brainly.com/question/15414305
#SPJ11
What is the mode for this list of numbers? 5, 9, 12, 11, 12, 19, 18
The mode is one of the measures of central tendency in statistics. It represents the number that appears most frequently in a given list of numbers. In the example above, the mode for the list of numbers {5, 9, 12, 11, 12, 19, 18} is 12.
The mode is defined as the number that occurs most frequently in a list of numbers. In a set of numbers, there can be one mode, more than one mode, or no mode at all.
To find the mode for the list of numbers {5, 9, 12, 11, 12, 19, 18}, we need to identify the number that appears most frequently. Here, we can observe that 12 is the number that appears twice, while all the other numbers only appear once.
Therefore, the mode for this list of numbers is 12. It's important to note that if there are multiple numbers that appear with the same highest frequency, then all of them are considered as modes. For instance, if the list of numbers was {5, 9, 12, 11, 12, 19, 19, 18}, then both 12 and 19 would be modes since they each appear twice.
In conclusion, the mode is one of the measures of central tendency in statistics. It represents the number that appears most frequently in a given list of numbers. In the example above, the mode for the list of numbers {5, 9, 12, 11, 12, 19, 18} is 12.
For more such questions on frequently
https://brainly.com/question/29985480
#SPJ8
Show that 1+ ele 1- ele can be reduced to icot ().
The expression 1 + e^(iθ) + e^(-iθ) can be reduced to i cot(θ) using Euler's formula and trigonometric identities.
Let's substitute e^(iθ) and e^(-iθ) in the given expression using Euler's formula:
1 + e^(iθ) + e^(-iθ)
= 1 + (cos(θ) + i sin(θ)) + (cos(-θ) + i sin(-θ))
Since cosine is an even function (cos(-θ) = cos(θ)) and sine is an odd function (sin(-θ) = -sin(θ)), we can simplify the expression further:
= 1 + (cos(θ) + i sin(θ)) + (cos(θ) - i sin(θ))
= 1 + 2cos(θ)
Now, we need to express the expression in terms of trigonometric functions to show the reduction to i cot(θ). We know that cot(θ) = cos(θ)/sin(θ).
Dividing the expression by sin(θ), we get:
(1 + 2cos(θ))/sin(θ)
Using the identity 2cos(θ) = 2cos(θ)/1, we can rewrite the expression as:
(1/2)(2cos(θ)/sin(θ)) + 1/sin(θ)
By substituting cot(θ) = cos(θ)/sin(θ), we can simplify the expression to:
(1/2)(2cot(θ)) + csc(θ)
= cot(θ) + csc(θ)
Therefore, we have shown that 1 + e^(iθ) + e^(-iθ) can be reduced to i cot(θ).
learn more about Euler's formula here:
https://brainly.com/question/12274716
#SPJ11
There is no product rule for integration but the corresponding antidifferentiation rule for the derivative product rule is
substitution
partial fraction decomposition
integration by parts
hyperbolic substitution
The corresponding antidifferentiation rule for the derivative product rule is integration by parts. Integration by parts is the antidifferentiation technique that corresponds to the derivative product rule.
Integration by parts is the antidifferentiation technique that corresponds to the derivative product rule. It allows us to integrate the product of two functions by breaking it down into two terms and applying a specific formula.
The formula states that the integral of the product of two functions, u(x) and v'(x), is equal to the product of u(x) and v(x) minus the integral of the product of u'(x) and v(x).
This technique is useful when faced with integrals that involve products of functions, as it allows us to simplify and solve them step by step. By applying integration by parts, we can find the antiderivative of a given function by strategically choosing which parts to differentiate and integrate, ultimately solving the integral.
Learn more about Integration: brainly.com/question/30094386
#SPJ11
Determine the value of k that will make the given lines perpendicular: (x, y) = (3,-2) + s(1,4); s E R and 12x + ky = 0.
The value of k that will make the given lines perpendicular: (x, y) = (3,-2) + s(1,4); s E R and 12x + ky = 0 is -48.
To determine the value of k that will make the given lines perpendicular, we need to find the slopes of the two lines and set them equal to the negative reciprocal of each other.
The equation of the first line is given by:
(x, y) = (3, -2) + s(1, 4)
The direction vector of this line is (1, 4), so the slope of the line is 4.
The equation of the second line is given by:
12x + ky = 0
To find the slope of this line, we can rewrite the equation in slope-intercept form (y = mx + b):
ky = -12x
y = (-12/k)x
Comparing this equation to y = mx + b, we can see that the slope is -12/k.
For the lines to be perpendicular, the slopes must be negative reciprocals of each other. Therefore, we have the equation:
4 × (-12/k) = -1
Simplifying the equation:
-48/k = -1
Cross-multiplying:
48 = -k
Dividing both sides by -1:
k = -48
Therefore, the value of k that will make the given lines perpendicular is -48.
Learn more about slope-intercept form here:
https://brainly.com/question/32634451
#SPJ11
A series circuit has a capacitor of 0.25 x 10 F. a resistor of 5 x 10¹ 2. and an inductor of I H. The initial charge on the capacitor is zero. If a 24-volt battery is connected to the circuit and the circuit is closed at r = 0, determine the charge on the capacitor at 1 = 0.001 seconds, at r = 0.01 seconds, and at any time. Also determine the limiting charge as 30, Enter the exact answer with a
we can use the formula Q(t) = Q_max * (1 - e^(-t/tau)). The limiting charge is equal to the maximum charge the capacitor can reach, Q_max.
In a series circuit consisting of a capacitor, resistor, and inductor, with a 24-volt battery connected, we need to determine the charge on the capacitor at different time intervals. Given the values of the components (capacitor: 0.25 x 10 F, resistor: 5 x 10¹² Ω, inductor: 1 H) and the initial charge on the capacitor being zero, we can calculate the charge at specific time points and the limiting charge.
To calculate the charge on the capacitor at a given time, we can use the formula for charging a capacitor in an RL circuit. The equation is given by Q(t) = Q_max * (1 - e^(-t / tau)), where Q(t) is the charge at time t, Q_max is the maximum charge the capacitor can reach, tau is the time constant (tau = L / R), and e is the base of the natural logarithm.
Substituting the given values, we can calculate the time constant tau as 1 H / 5 x 10¹² Ω. We can then calculate the charge on the capacitor at specific time intervals, such as 0.001 seconds and 0.01 seconds, by plugging in the respective values of t into the formula.
Additionally, to determine the limiting charge, we need to consider that as time goes to infinity, the charge on the capacitor approaches its maximum value, Q_max. Therefore, the limiting charge is equal to Q_max.
By performing the calculations using the given values and the formulas mentioned above, we can find the exact charge on the capacitor at the specified time intervals and the limiting charge.
Learn more about series circuit here:
https://brainly.com/question/26589211
#SPJ11
Find the equation of the line shown.
to get the equation of any straight line, we simply need two points off of it, let's use those two in the picture below.
[tex](\stackrel{x_1}{-4}~,~\stackrel{y_1}{3})\qquad (\stackrel{x_2}{4}~,~\stackrel{y_2}{1}) \\\\\\ \stackrel{slope}{m}\implies \cfrac{\stackrel{\textit{\large rise}} {\stackrel{y_2}{1}-\stackrel{y1}{3}}}{\underset{\textit{\large run}} {\underset{x_2}{4}-\underset{x_1}{(-4)}}} \implies \cfrac{-2}{4 +4} \implies \cfrac{ -2 }{ 8 } \implies - \cfrac{1}{4}[/tex]
[tex]\begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{3}=\stackrel{m}{- \cfrac{1}{4}}(x-\stackrel{x_1}{(-4)}) \implies y -3 = - \cfrac{1}{4} ( x +4) \\\\\\ y-3=- \cfrac{1}{4}x-1\implies {\Large \begin{array}{llll} y=- \cfrac{1}{4}x+2 \end{array}}[/tex]
Find an equation of the plane passing through the given points. (3, 7, −7), (3, −7, 7), (−3, −7, −7) X
An equation of the plane passing through the points (3, 7, −7), (3, −7, 7), (−3, −7, −7) is x + y − z = 3.
Given points are (3, 7, −7), (3, −7, 7), and (−3, −7, −7).
Let the plane passing through these points be ax + by + cz = d. Then, three planes can be obtained.
For the given points, we get the following equations:3a + 7b − 7c = d ...(1)3a − 7b + 7c = d ...(2)−3a − 7b − 7c = d ...(3)Equations (1) and (2) represent the same plane as they have the same normal vector.
Substitute d = 3a in equation (3) to get −3a − 7b − 7c = 3a. This simplifies to −6a − 7b − 7c = 0 or 6a + 7b + 7c = 0 or 2(3a) + 7b + 7c = 0. Divide both sides by 2 to get the equation of the plane passing through the points as x + y − z = 3.
Summary: The equation of the plane passing through the given points (3, 7, −7), (3, −7, 7), and (−3, −7, −7) is x + y − z = 3.
Learn more about equation click here:
https://brainly.com/question/2972832
#SPJ11
Use the laws of logarithms to expand and simplify the expression. In(x(x + 5)(x+6 6))
The expansion of the given logarithmic expression is : 3In(x) + In(5).
Logarithms are used to help calculate complex values.
There are a number of logarithmic laws that can be used to simplify logarithmic expressions.
We can use the laws of logarithms to expand and simplify the expression
In(x(x + 5)(x+6 6)).
Here’s how to expand and simplify the expression,
In(x(x + 5)(x+6 6)):
Step 1: Firstly, we can expand the expression In(x(x + 5)(x+6 6)) as a sum of simpler logarithms.
We can use the log product rule for this as follows:
In(x(x + 5)(x+6 6)) = In(x) + In(x + 5) + In(x + 6) - In(6)
Step 2: Next, we can simplify the expression.
We can use the log identity In(ab) = In(a) + In(b) to simplify In(x + 5) and In(x + 6):
In(x + 5) = In(x) + In(5)
In(x + 6) = In(x) + In(6)
Step 3: We can then substitute these simplified expressions into the expanded expression from
This gives:
In(x(x + 5)(x+6 6)) = In(x) + In(x + 5) + In(x + 6) - In(6)
= In(x) + In(5) + In(x) + In(6) + In(x) - In(6)
= 3In(x) + In(5)
This is the expanded and simplified form of the expression In(x(x + 5)(x+6 6)) using the laws of logarithms.
Know more about the logarithmic expression
https://brainly.com/question/31117877
#SPJ11
A continuous random variable X has the following probability density function: = {(2.25-1²) 05x<15) otherwise B 0,481 C 0.519 Find P(0.25 < X < 0.75) A 0.440 D 0.560
The probability P(0.25 < X < 0.75) is equal to 0.440.
The probability density function (PDF) of a continuous random variable describes the likelihood of the variable taking on specific values. In this case, the PDF is defined as follows:
f(x) = 2.25 - x^2 0 < x < 1.5
0 otherwise
To find P(0.25 < X < 0.75), we need to calculate the integral of the PDF within the given interval:
P(0.25 < X < 0.75) = ∫[0.25, 0.75] f(x) dx
Substituting the PDF into the integral, we have:
P(0.25 < X < 0.75) = ∫[0.25, 0.75] (2.25 - x^2) dx
Evaluating this integral, we find:
P(0.25 < X < 0.75) = [(2.25x - (1/3)x^3)]|[0.25, 0.75]
Calculating the expression at the upper and lower limits of integration, we get:
P(0.25 < X < 0.75) = [(2.25 * 0.75 - (1/3) * (0.75)^3) - (2.25 * 0.25 - (1/3) * (0.25)^3)]
Simplifying this expression gives us:
P(0.25 < X < 0.75) = 0.440
Learn more about integral here:
https://brainly.com/question/31109342
#SPJ11
(Your answer will be a fraction. In the answer box write is
as a decimal rounded to two place.)
2x+8+4x = 22
X =
Answer
The value of x is 7/3, which can be rounded to two decimal places as approximately 2.33.
To solve the equation 2x + 8 + 4x = 22, we need to combine like terms and isolate the variable x.
Combining like terms, we have:
6x + 8 = 22
Next, we want to isolate the term with x by subtracting 8 from both sides of the equation:
6x + 8 - 8 = 22 - 8
6x = 14
To solve for x, we divide both sides of the equation by 6:
(6x) / 6 = 14 / 6
x = 14/6
Simplifying the fraction 14/6, we get:
x = 7/3
Therefore, the value of x is 7/3, which can be rounded to two decimal places as approximately 2.33.
for such more question on decimal places
https://brainly.com/question/24015908
#SPJ8
the graph of function f is shown. function g is represented by the equation. g(x)=8(1/2)^x which statement correctly compares the two functions?
The statement that correctly compares the two functions include the following: D. They have different y-intercepts but the same end behavior.
What is y-intercept?In Mathematics and Geometry, the y-intercept is sometimes referred to as an initial value or vertical intercept and the y-intercept of any graph such as a linear equation or function, generally occur at the point where the value of "x" is equal to zero (x = 0).
By critically observing the graph and the functions shown in the image attached above, we can reasonably infer and logically deduce the following y-intercepts:
y-intercept of f(x) = (0, 4).
y-intercept of g(x) = (0, 8).
Additionally, the end behavior of both functions f(x) and g(x) is that as x tends towards infinity, f(x) and g(x) tends towards zero:
x → ∞, f(x) → 0.
x → ∞, g(x) → 0.
Read more on y-intercept here: brainly.com/question/28351981
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
RS
ols
Two lines meet at a point that is also the endpoint of a ray as shown.
w
Jes
120°
is
What are the values of w, z,and y? What are some of the angle relationships? Select your answers from the drop-
down lists
35
The angles with measurements w' and 120 are vertical
The value of y is
The angle that measures a' is vertically opposite from the angle that measures
Thus, the value of wis ✓
degrees. Thus, the value of z
1. The angles w and 120 are supplementary angles
2. The value of w is 60 degrees
3. a is vertically opposite to angle 120
4. y is 25 degrees
What are vertically opposite angles?
Vertically opposite angles, also known as vertical angles, are a pair of angles formed by two intersecting lines. Vertical angles are opposite to each other and share a common vertex but not a common side.
1) 120 + w = 180 (Supplementary angles)
2)w = 60 degrees
3) a = 120 (Vertically opposite angles)
4) y = 180 - (120 + 35)
y = 25 degrees
Learn more about Vertically opposite angles:https://brainly.com/question/29186415
#SPJ1
Find a k-connected graph of order n and size m such that 2m = nk when (a) k = 1 and (b) k = 2 (b) Find the number of perfect matchings in K6.
(a) To construct a k-connected graph of order n and size m such that 2m = nk when k = 1, we can consider a cycle graph.
A cycle graph of order n, denoted by Cn, is a simple graph consisting of n vertices arranged in a cycle, where each vertex is connected to its two adjacent vertices. In this case, since k = 1, the graph is 1-connected, meaning that the removal of any single vertex does not disconnect the graph. The number of edges in a cycle graph is equal to the number of vertices, so 2m = n. Therefore, by setting m = n/2, we can satisfy the equation.
(b) To find the number of perfect matchings in K6, where K6 denotes the complete graph with 6 vertices, we can use the formula for counting perfect matchings in a complete graph. In a complete graph with an even number of vertices, the number of perfect matchings is given by (n-1)!! = (6-1)!! = 5!! = 5 x 3 x 1 = 15. Therefore, there are 15 perfect matchings in K6.
To know more about k-connected graph click here: brainly.com/question/32775771
#SPJ11
Solve 4₁-34x4 = 0 u(o,t)= u(at) - I.C: U(X₂0) = 5 sin 6x
The solution to the given differential equation subject to the specified boundary and initial conditions is u(x, t) = Σ([tex]A_n[/tex] cos([tex]\lambda_n[/tex]x) + [tex]B_n[/tex] sin([tex]\lambda_n[/tex]x))exp(-[tex]\lambda_n[/tex]^2t/3).
The given partial differential equation is a heat equation represented by [tex]u_t-3u_{xx}[/tex]=0, where u represents the dependent variable, t represents time, and x represents the spatial variable.
The equation describes the diffusion of heat in one dimension.
The boundary condition states that u at x = 0 and x = z (where z is a constant) are equal, implying a periodic behavior.
This condition ensures that the solution is periodic in the spatial domain.
The initial condition specifies the initial distribution of the dependent variable u at time t = 0.
In this case, u(x, 0) = 5 sin(6x), indicating that the initial temperature distribution is sinusoidal with a frequency of 6.
To solve the given equation, we can use the method of separation of variables.
We assume a solution of the form u(x, t) = X(x)T(t), where X(x) represents the spatial component and T(t) represents the temporal component.
By substituting this assumed solution into the heat equation, we can separate the variables and obtain two ordinary differential equations: X''(x)/X(x) = T'(t)/3T(t) = -[tex]\lambda^2[/tex].
Solving the spatial equation X''(x)/X(x) = -[tex]\lambda^2[/tex] gives the eigenvalues λ_n = ±√(n^2π^2/9), and the corresponding eigenfunctions [tex]X_n[/tex](x) = [tex]A_n[/tex] cos(λ_nx) + [tex]B_n[/tex] sin([tex]\lambda_n[/tex]x).
Solving the temporal equation T'(t)/3T(t) = -[tex]\lambda^2[/tex] gives [tex]T_n[/tex](t) = [tex]C_n[/tex] exp(-[tex]\lambda_n[/tex]^2t/3).
The general solution for u(x, t) is obtained by superposing the solutions corresponding to each eigenvalue: u(x, t) = Σ([tex]A_n[/tex] cos([tex]\lambda_n[/tex]x) + [tex]B_n[/tex] sin([tex]\lambda_n[/tex]x))exp(-[tex]\lambda_n[/tex]^2t/3).
To determine the coefficients [tex]A_n[/tex] and [tex]B_n[/tex], we use the initial condition u(x, 0) = 5 sin(6x) and apply the orthogonality properties of the eigenfunctions.
In summary, the solution to the given heat equation subject to the specified boundary and initial conditions is u(x, t) = Σ([tex]A_n[/tex] cos([tex]\lambda_n[/tex]x) + [tex]B_n[/tex] sin([tex]\lambda_n[/tex]x))exp(-[tex]\lambda_n[/tex]^2t/3), where [tex]\lambda_n[/tex] = ±√(n^2π^2/9), and [tex]A_n[/tex] and [tex]B_n[/tex] are coefficients determined by the initial condition.
Learn more about Equation here:
https://brainly.com/question/29018878
#SPJ11
The complete question is:
Solve [tex]u_t-3u_{xx}[/tex] = 0
B.C:u(o,t)= u(z,t)
I.C: u(x,0) = 5 sin 6x
Suppose α∈C is a root of the giver irreducible polynomial f(x)∈Q[x].Find the multiplicative inverse of β∈Q[α]
Suppose α∈C is a root of the giver irreducible polynomial f(x)∈Q[x]. To find the multiplicative inverse of β∈Q[α], we can use the following formula: β^(-1) = 1/β.
Let Q be the field of rational numbers. If α is a root of an irreducible polynomial f(x)∈Q[x], then α is an algebraic number. Therefore, the set Q[α] of numbers of the form r+sα (where r and s are rational numbers) is a field.
Thus, if β∈Q[α], then β^(-1) is also in Q[α].
Let's suppose that β = r+sα. In order to find β^(-1), we can use the following formula:
β^(-1) = (r+sα)^(-1) = 1/(r+sα) = (r-sα)/(r^2 - s^2 α^2).
Therefore, the multiplicative inverse of β∈Q[α] is (r-sα)/(r^2 - s^2 α^2).
Learn more about multiplicative inverse here:
https://brainly.com/question/17300806
#SPJ11
which property justifies this statement? if 4x = 20, then x=5
The division property of equality and dividing both sides of the equation by 4, we can conclude that if 4x = 20, then x = 5.
The property that justifies the statement "if 4x = 20, then x = 5" is the division property of equality.
According to the division property of equality, if both sides of an equation are divided by the same nonzero value, the equation remains true. In this case, we have the equation 4x = 20. To isolate x, we divide both sides of the equation by 4:
(4x) / 4 = 20 / 4
This simplifies to:
x = 5
Therefore, by applying the division property of equality and dividing both sides of the equation by 4, we can conclude that if 4x = 20, then x = 5.
for such more question on division property
https://brainly.com/question/29667212
#SPJ8
If Ax² + 2x + 4 = 2x² - Bx+C, find A, B and C. (3 marks) (b) Find the quotient and the remainder of (2x47x³-3x+5)+(x²-1). (7 marks)
the complete answer is given as: Quotient = 2x² − 7x − 1, and Remainder = - 2x + 4.
Here is the solution for the given problem.
(a)If Ax² + 2x + 4 = 2x² - Bx+C, find A, B, and C.
To find A, B, and C, we can simply compare the coefficients of the variables on each side of the equation. Thus, we get;
2x² − Bx + C = Ax² + 2x + 4(2x² − Ax²) + (−Bx) + (C − 4) = 2x + 0
Therefore, by matching the coefficients, we get:
2x² − Ax² = 2x²; thus, A = 2x² - Ax² = 0 ⇒ Ax² = 0 ⇒ A = 0Also, −Bx = 2x;
thus, B = -2Similarly, C − 4 = 0; thus, C = 4.(b)
Find the quotient and the remainder of (2x4 − 7x³ − 3x + 5) + (x² − 1).
To solve the given expression, we use the long division method.
Dividing the polynomials, we get:
The quotient is 2x² − 7x − 1, and the remainder is - 2x + 4.
Thus, the complete answer is given as: Quotient = 2x² − 7x − 1, and Remainder = - 2x + 4.
learn more about variables here
https://brainly.com/question/82796
#SPJ11
Diagonalize the following matrix. The real eigenvalues are given to the right of the matrix. 30-6 25 6; λ = 3, 5 00 5 Select the correct choice below and, if necessary, fill in the answer box to complete your choice. 3 0 0 OA. For P= D= 0 3 0 005 300 OB. For P= D= 0 5 0 005 OC. The matrix cannot be diagonalized. Help me solve this View an example Get more help.
The given matrix can be diagonalized and the correct option is (B) [tex]$P=\begin{bmatrix}0 & 5\\0 & 0\end{bmatrix},\ D=\begin{bmatrix}5 & 0\\0 & 25\end{bmatrix}$[/tex].
Given matrix is, [tex]\[\begin{bmatrix}30-6 & 25\\6 & 5\end{bmatrix}\][/tex]
and real eigenvalues are 3, 5
Let A be the given matrix, λ be the eigenvalue and x be the eigenvector, then
[tex]\[A\vec x=\lambda \vec x\][/tex]
The characteristic equation is,
[tex]\[\begin{vmatrix}30-6-\lambda & 25\\6 & 5-\lambda\end{vmatrix}=0\]\[\implies (30-6-\lambda)(5-\lambda)-25\cdot 6=0\]\[\implies \lambda ^2-35\lambda +100=0\]Solving it, we get\[\lambda_1=5\]and\[\lambda_2=30-5=25\][/tex]
We find eigenvectors as follows: Let [tex]$\lambda =5$[/tex]. The equation [tex]$(A-\lambda I)\vec x=0$[/tex] becomes,
[tex]\[\begin{bmatrix}30-6-5 & 25\\6 & 5-5\end{bmatrix}\begin{bmatrix}x_1\\x_2\end{bmatrix}=\begin{bmatrix}19 & 25\\6 & 0\end{bmatrix}\begin{bmatrix}x_1\\x_2\end{bmatrix}=\begin{bmatrix}0\\0\end{bmatrix}\][/tex]
From the second row of above matrix, we have
[tex]\[\Rightarrow x_2=0\][/tex]
From the first row, we have
[tex]\[\Rightarrow 19x_1+25x_2=0\][/tex]
or
[tex]\[\Rightarrow 19x_1=0\][/tex]
Thus, taking [tex]$x_1=1$[/tex], we get the eigenvector corresponding to [tex]$\lambda =5$[/tex] as
[tex]\[\begin{bmatrix}1\\0\end{bmatrix}\][/tex]
Similarly, if [tex]$\lambda =25$[/tex], then the equation [tex]$(A-\lambda I)\vec x=0$[/tex] becomes,
[tex]\[\begin{bmatrix}30-6-25 & 25\\6 & 5-25\end{bmatrix}\begin{bmatrix}x_1\\x_2\end{bmatrix}=\begin{bmatrix}-\ 1 & 25\\6 & -\ 20\end{bmatrix}\begin{bmatrix}x_1\\x_2\end{bmatrix}=\begin{bmatrix}0\\0\end{bmatrix}\][/tex]
From the second row of above matrix, we have
[tex]\[\Rightarrow 5x_2=0\][/tex]
Thus, taking [tex]$x_2=1$[/tex], we get the eigenvector corresponding to [tex]$\lambda =25$[/tex] as
[tex]\[\begin{bmatrix}-\ 5\\1\end{bmatrix}\][/tex]
Therefore, the matrix [tex]$P$[/tex] of eigenvectors and diagonal matrix [tex]$D$[/tex] of eigenvalues are,
[tex]\[P=\begin{bmatrix}1 & -\ 5\\0 & 1\end{bmatrix}\][/tex]
and
[tex]\[D=\begin{bmatrix}5 & 0\\0 & 25\end{bmatrix}\][/tex]
To learn more about matrix, refer:-
https://brainly.com/question/29132693
#SPJ11
For each of the following statements, determine if it is true or false. If it's true, give a brief explanation of why. If it's false, find a counterexample. Let the vector fields in question be fields in R³. (a) A result from Calculus 1 gives us the fact that for a function f(z), if f'(z)=0 for all in the domain, then f is a constant function. True or false: If V F-0 for all points in the domain then F is constant. (b) True or false: If V x F-6, then F is constant. I (c) True or false: A vector field consisting of parallel vectors has zero curl. (d) True or false: A vector field consisting of parallel vectors has zero divergence. (e) True or false: The vector field curlf is orthogonal to F at every point.
(a) True. If a vector field V F is zero for all points in its domain, then F is a constant vector field. (b) False. The cross product V × F being 6 does not imply that F is constant. (c) True. A vector field consisting of parallel vectors has zero curl. (d) False. A vector field consisting of parallel vectors can have a non-zero divergence. (e) True. The vector field curl f is orthogonal to F at every point.
(a) True. The statement is true. In Calculus 1, the result known as the Mean Value Theorem states that if a function has derivative zero on an interval, then the function is constant on that interval. This result can be extended to vector fields. If the vector field V F is zero at all points in its domain, then each component function of F has derivative zero, implying that each component function is constant. Therefore, F is a constant vector field.
(b) False. The statement is false. If the vector field V × F is equal to 6, it does not necessarily imply that F is constant. The cross product of two vector fields can give a non-zero vector field, even if one of the vector fields is constant.
(c) True. The statement is true. If a vector field consists of parallel vectors, it means that the vectors have the same direction at every point in the field. The curl of a vector field measures the rotation or circulation of the vectors. Since parallel vectors do not exhibit rotation or circulation, the curl of a vector field consisting of parallel vectors is zero.
(d) False. The statement is false. A vector field consisting of parallel vectors can have a non-zero divergence. The divergence of a vector field measures the flux or flow of the vectors. Even if the vectors in the field are parallel, they can still have varying magnitudes, resulting in a non-zero divergence.
(e) True. The statement is true. The vector field curl f is orthogonal to F at every point. The curl of a vector field measures the rotation or circulation of the vectors. When the curl of a vector field is calculated, the result is a vector that is orthogonal (perpendicular) to the original vector field at every point. Therefore, the vector field curl f is orthogonal to F at every point.
To know more about vector field,
https://brainly.com/question/32565585
#SPJ11
Prove with the tableau calculus that
{¬¬P > (RV Q), R> ¬P} # RV Q.
The statement {¬¬P > (RV Q), R > ¬P} ⊢ RV Q is provable using tableau calculus.
To prove the statement {¬¬P > (RV Q), R > ¬P} ⊢ RV Q using tableau calculus, we will construct a tableau and show that it leads to a contradiction.
Here's the tableau for the given statement:
1. {¬¬P > (RV Q), R > ¬P} (Assumption)
2. ¬RV Q (Negation of the desired conclusion)
We will now apply tableau rules to derive new branches from the initial branch and check for contradictions.
Branch 1:
1. {¬¬P > (RV Q), R > ¬P} (Copy)
2. ¬RV Q (Copy)
3. ¬¬P > (RV Q) (Conjunction Elimination from 1)
4. R > ¬P (Conjunction Elimination from 1)
5. ¬¬P (Modus Tollens on 3 and 2)
6. P (Double Negation Elimination on 5)
7. R (Modus Ponens on 4 and 6)
8. ¬P (Modus Ponens on 4 and 6)
9. ⊥ (Contradiction: ¬P and P)
Branch 1 leads to a contradiction.
Since there is at least one branch that leads to a contradiction, we can conclude that the initial assumption is valid. Therefore, the statement {¬¬P > (RV Q), R > ¬P} ⊢ RV Q is provable using tableau calculus.
Learn more about tableau here:
https://brainly.com/question/32066853
#SPJ11
