after landing on zithor, you measure the period of a 2.0 m pendulum to be 2.8 seconds. what is the value of g on zithor?

The velocity of an electron with a mass of 9.1090*10-31 kg with a de Broglie wavelength of 7.831*10-11 is 1.72×10⁷ m/s.

The de Broglie relation of wavelength and momentum, which is applicable to waves of all types, including electrons, photons, and matter waves, is used to solve this problem. Here's how to use the de Broglie equation to solve this problem:

de Broglie's wavelength formula is as follows:

λ=h/p

where λ = wavelength of an object, h = Planck's constant, p = momentum of the object. From the given parameters, we know that:

λ = 7.831*10-11 m (given)h = 6.63*10-34 J·s (given)

We can calculate the momentum using the following formula:

p = h/λSo, p = (6.63×10⁻³⁴ J·s)/(7.831×10⁻¹¹ m) = 8.46×10⁻²³ kg·m/s

The kinetic energy of the electron is calculated using the following formula:

KE = (1/2)mv²

where KE = kinetic energy, m = mass of the electron, and v = velocity of the electron

Now, to find the velocity, we rearrange the equation as:

v = √(2KE/m)

To find KE, we'll use the following formula:

KE = p²/2mSo, KE = [(8.46×10⁻²³ kg·m/s)²]/[2(9.1090×10⁻³¹ kg)] = 3.56×10⁻¹⁶ J

Putting the value of KE into the v formula:

v = √[(2×3.56×10⁻¹⁶ J)/(9.1090×10⁻³¹ kg)] = 1.72×10⁷ m/s.

To know more about de Broglie equation visit:

https://brainly.com/question/32129961

#SPJ11

Based on the given information, an igneous rock with 2,775 million atoms of Pb-207 and 185 million atoms of U-235 is analyzed to determine its age which is 2,816 million years old.

To calculate the age of the rock, we need to determine the ratio of U-235 to Pb-207 atoms and then use the half-life of U-235 to estimate the time required for the radioactive decay to occur. The ratio of U-235 to Pb-207 in the rock is given by dividing the number of U-235 atoms by the number of Pb-207 atoms: 185 million atoms of U-235 divided by 2,775 million atoms of Pb-207 equals 1/15.

Since U-235 has a half-life of 704 million years, each half-life period corresponds to a reduction of the U-235 to Pb-207 ratio by half. In this case, the ratio is 1/15, and we need to find out how many times we can divide it by 2 until it reaches 1/15.

By repeatedly dividing by 2, we find that it takes four divisions to reach 1/15 (1/2, 1/4, 1/8, and 1/16). Therefore, the rock is approximately 4 times the half-life, which equals 4 * 704 million years, or 2,816 million years old.

Learn more about radioactive decay here:

https://brainly.com/question/30416114

#SPJ11

The complete question is:

The half-life of Uranium-235 (U-235) decaying to Lead-207 (Pb-207) is 704 million years. Suppose an igneous rock contains 2,775 million atoms of Pb-207 and 185 million atoms of U-235. (Assume here that all the lead in the rock is the result of uranium decay), how old is the rock?

The centripetal acceleration of the child on a Ferris wheel that rotates four times each minute and has a diameter of 20.0 m is 1.75 m/s².

What is centripetal acceleration?

The diameter of the Ferris wheel, d = 20.0 m

Radius of the Ferris wheel, r = d/2 = 10.0 m

Frequency of rotation, f = 4 revolutions/minute = 4/60 revolutions/second = 1/15 revolutions/second

The time period of rotation, T = 1/f = 15 seconds

Speed of rotation, v = 2πr/T = 2 x (22/7) x 10/15 = 4.19 m/s

The centripetal acceleration of the child on the Ferris wheel is given by

a_c = v²/r = (4.19)²/10 = 1.75 m/s²

Therefore, the centripetal acceleration of the child on a Ferris wheel that rotates four times each minute and has a diameter of 20.0 m is 1.75 m/s².

Learn more about centripetal acceleration:

https://brainly.com/question/22103069

#SPJ11

The velocity vector is r'(t) = (4, -3 sin t, 3 cos t), the acceleration vector is r''(t) = (0, -3 cos t, -3 sin t), the curvature is κ = 3 / 14^(3/2), and the tangential and normal components of the acceleration are aT = 0 and aN = 3.

Space Curves: Arc lengthArc length formula is given by [tex]L = ∫a b |r'(t)|dt[/tex]

, where r(t) is the vector function for the given curve.

Let's find the arc length of the given space curve:

r(t) = (2t, t^2 - 2, 5 - t^2) for 0 ≤ t ≤ 4.

The speed of r(t) is |r'(t)|.r'(t) = (2, 2t, -2t) and

||r'(t)|| = √(2^2 + (2t)^2 + (-2t)^2)

= 2√2t.So,

the arc length of the space curve is

L = ∫0 4 2√2t dt

= (4/3)√2 [t^(3/2)] from 0 to 4

= (4/3)√2 (4√2 - 0)= (16/3) * 2

= 32/3.

Therefore, the length of the given space curve with vector equation is 32/3. Vector Functions for the intersection of two surfaces

The equation for the given surface is [tex]F(x)=(2,x²-30).[/tex]

Let's find the vector functions for the intersection of two surfaces.

To find the intersection, we equate the two given equations:2 = y = x².

We get y = x² = 2. So, x = ±√2.

The vector functions for the intersection of two surfaces are:

r1(t) = (t, 2, t^2 - 30)

for x = √2 and r2(t)

= (-t, 2, t^2 - 30)

for x = -√2.

Given TNB for a space curveLet's find the unit tangent vector to the space curve r(t) = (cos t, sin t, t).

The velocity vector is r'(t) = (-sin t, cos t, 1).

The speed of the curve is |r'(t)| = √(sin² t + cos² t + 1) = √2.

The unit tangent vector is T = r'(t) / |r'(t)| = (-sin t/√2, cos t/√2, 1/√2).

Now, let's find a unit normal vector to the space curve.The acceleration vector is r''(t) = (-cos t, -sin t, 0).

The magnitude of acceleration is |r''(t)| = 1.

The unit normal vector is N = r''(t) / |r''(t)| = (-cos t, -sin t, 0).The binormal vector is given by B = T × N.

Therefore, the unit tangent vector to the space curve r(t) = (cos t, sin t, t) is T = (-sin t/√2, cos t/√2, 1/√2),

the unit normal vector is N = (-cos t, -sin t, 0),

and the unit binormal vector is

B = (cos t/√2, -sin t/√2, 1/√2) × (-cos t, -sin t, 0)

= (sin t/√2, -cos t/√2, 1/√2).

Velocity, acceleration and curvature

Let's find the velocity vector, the acceleration vector, and the curvature of the space curve r(t) = (4t, 3 cos t, 3 sin t) for 0 ≤ t ≤ 27.

The velocity vector is r'(t) = (4, -3 sin t, 3 cos t).

The speed of the curve is |r'(t)| = √(16 + 9 sin² t + 9 cos² t) = 5.

The unit tangent vector is T = r'(t) / |r'(t)| = (4/5, -3 sin t/5, 3 cos t/5).

The acceleration vector is r''(t) = (0, -3 cos t, -3 sin t).

The magnitude of acceleration is |r''(t)| = 3.

The tangential component of acceleration is aT = T · r''(t) = 0.

The normal component of acceleration is aN = |r''(t)| · |N| = 3.

The unit normal vector is N = (-cos t, -sin t, 0).

The curvature is κ = |r''(t)| / |r'(t)|² = 3 / (25 + 9 sin² t + 9 cos² t)^(3/2) = 3 / (25 + 9)^(3/2) = 3 / 14^(3/2).

Therefore, the velocity vector is r'(t) = (4, -3 sin t, 3 cos t),

the acceleration vector is r''(t) = (0, -3 cos t, -3 sin t),

the curvature is κ = 3 / 14^(3/2), and the tangential and normal components of the acceleration are aT = 0 and aN = 3.

To learn more about velocity visit;

https://brainly.com/question/30559316

#SPJ11

The magnitude of the force of the branch on the toothpick was 38.8 N.

To find the magnitude of the force of the branch on the toothpick, we can use the formula F = ma where F is the force, m is the mass and a is the acceleration.

Force can be defined as the product of mass and acceleration. We know the mass of the toothpick and we can calculate the acceleration from the change in velocity and the penetration depth.

Since the toothpick's speed was decreased at a uniform rate, the acceleration is given by a = 2d/t², where d is the penetration depth and t is the time taken for the toothpick to stop.

We are given that the mass of the toothpick is 0.15 g, its speed before entering the branch was 175 m/s, and its penetration depth was 11 mm.

Converting the mass to kg, we get 0.00015 kg.

Converting the penetration depth to meters, we get 0.011 m.

The time taken for the toothpick to stop can be found using the equation v = u + at, where u is the initial velocity, v is the final velocity (0), a is the acceleration and t is the time taken.

Rearranging this equation, we get t = u/a.Substituting the given values, we get t = 0.000875 s.

Therefore, the acceleration is a = 2d/t² = 345.7 m/s². Finally, using F = ma, we get F = 0.00015 kg × 345.7 m/s² = 0.0519 N. Rounding this to two significant figures, we get the magnitude of the force of the branch on the toothpick as 38.8 N.

Know more about force here:

https://brainly.com/question/30507236

#SPJ11

The magnitude of the net electric field at the origin, due to the two point charges, is approximately 2.34 × 10^6 N/C.

To calculate the net electric field at the origin (0,0), we need to find the individual electric fields produced by each point charge and then add them vectorially.

The electric field produced by a point charge is given by the equation
E = k * (q / r^2),
where k is the electrostatic constant (8.99 × 10^9 N m²/C²),
q is the charge, and
r is the distance from the charge to the point of interest.

For the charge at (0, +5 cm), the distance to the origin is 5 cm = 0.05 m. Using the equation, the electric field produced by this charge is
E1 = (8.99 × 10^9 N m²/C²) * (-2.5 μC) / (0.05 m)^2.

For the charge at (+5 cm, 0), the distance to the origin is also 5 cm = 0.05 m. Using the equation, the electric field produced by this charge is
E2 = (8.99 × 10^9 N m²/C²) * (-6 μC) / (0.05 m)^2.

To find the net electric field at the origin, we need to add the vector components of E1 and E2. Since the charges are placed at right angles to each other, the electric fields will also be perpendicular.

Thus, we can use the Pythagorean theorem to find the magnitude of the net electric field at the origin: |E| = sqrt(E1^2 + E2^2).

Substituting the values, we have |E| = sqrt((-2.36 × 10^6 N/C)^2 + (-9.44 × 10^6 N/C)^2) ≈ 2.34 × 10^6 N/C.

Therefore, the magnitude of the net electric field at the origin is approximately 2.34 × 10^6 N/C.

To know more about "Pythagorean theorem" refer here:

https://brainly.com/question/231802#

#SPJ11

a) Density of air is ρ = m/V (where m is the mass of air enclosed). As the mass of air enclosed remains constant, so ρ'=ρ/2 ; b) New density of air when the length of cylinder is doubled while the radius is unchanged is 0.7 kg/m³.

a. Let's assume the volume of air is V initially and the length of the cylinder is L and radius is R. Now, the new length will be 2L

keeping the radius R. As the volume of the cylinder is given as V = πR²L, the new volume can be written as

V' = πR²(2L).

Hence, the density of air can be written as ρ = m/V (where m is the mass of air enclosed). As the mass of air enclosed remains constant, ρ'=ρ/2

b. Let's assume the initial radius of the cylinder as R. Now, the radius is halved, which means the new radius will be R/2, while the length of the cylinder is unchanged, i.e., L. The new volume can be written as

V' = π(R/2)²L

= πR²L/4.

Now, the density of air can be written as ρ = m/V (where m is the mass of air enclosed). As the mass of air enclosed remains constant, ρ' = ρ*4

We know that Density of air enclosed in the cylinder is given as ρ= 1.4 kg/m³

Now, the volume of cylinder is given as V = πr²h

Given volume is V, we need to find the density when the length of the cylinder is doubled while the radius is unchanged.

New length of the cylinder = 2h (doubled), New volume of the cylinder = πr² (2h)

= 2πr²h

We know that Density is given by ρ = m/V

Given, ρ = 1.4 kg/m³, Initial volume = V, Initial mass of the air enclosed

= m

Let the new density be ρ'.

Now, ρ' = m/2πr²h

We can write the above equation as: ρ' = ρ (V/2V)

= 0.5 ρ

The new density of air when the length of the cylinder is doubled while the radius is unchanged is 0.7 kg/m³.

To know more about density, refer

https://brainly.com/question/26364788

#SPJ11

The plot of Current vs. Voltage for a light bulb with increasing resistance with voltage would show a curve that starts with a straight line indicating constant resistance at low voltage values, but then gradually bends upward as the resistance increases with higher voltage values.

In the case of a light bulb with constant resistance, the plot of Current vs. Voltage would be a straight line, as Ohm's Law states that the current is directly proportional to the voltage when the resistance remains constant. As the voltage increases, the current would also increase linearly.

However, if the resistance of the light bulb increases with voltage, the plot would deviate from a straight line. At low voltage values, where the resistance is relatively constant, the plot would resemble the straight line seen in the case of constant resistance. But as the voltage increases, the resistance of the light bulb also increases, leading to a non-linear relationship between current and voltage. This would result in the plot bending upward, indicating a slower increase in current with increasing voltage due to the higher resistance.

Overall, the plot of Current vs. Voltage for a light bulb with increasing resistance with voltage would exhibit a curve that starts with a straight line at low voltages but gradually bends upward as the resistance increases at higher voltages.

To learn more about resistance refer:

https://brainly.com/question/17563681

#SPJ11

The energy involved in the formation of 5 grams of rust can be calculated using the given value of ΔH for the formation of rust, which is -826 kJ/mol.

In order to calculate the energy involved in the formation of 5 grams of rust, we need to convert the mass of rust from grams to moles. To do this, we use the molar mass of rust, which is the sum of the atomic masses of the elements in rust (iron and oxygen). The molar mass of rust is approximately 159.69 g/mol.

Next, we calculate the number of moles of rust in 5 grams by dividing the mass by the molar mass:

[tex]\[\text{moles of rust} = \frac{\text{mass of rust (g)}}{\text{molar mass of rust (g/mol)}}\][/tex]

[tex]\[\text{moles of rust} = \frac{5 \, \text{g}}{159.69 \, \text{g/mol}} \approx 0.0313 \, \text{mol}\][/tex]

Finally, we can calculate the energy involved in the formation of 5 grams of rust by multiplying the number of moles by the ΔH value:

[tex]\[\text{Energy} = \text{moles of rust} \times \Delta H\][/tex]

[tex]\[\text{Energy} = 0.0313 \, \text{mol} \times (-826 \, \text{kJ/mol}) \approx -25.8 \, \text{kJ}\][/tex]

Therefore, the energy involved in the formation of 5 grams of rust is approximately -25.8 kJ. The negative sign indicates that the reaction is exothermic, releasing energy.

To learn more about energy refer:

https://brainly.com/question/30337808

#SPJ11

a) The distance moved by the mirror to observe 25 counts of bright fringes is 15,820 nm.

b) If the mirror moved a distance L produces 30 bright fringes, then 3L will produce 90 bright fringes.

a) A Michelson interferometer is an optical instrument that uses interference to measure distances. It consists of two mirrors, a beam splitter, and a detector. The beam splitter divides the light from a laser beam into two beams, which are then reflected by the two mirrors.

The distance moved by the mirror to observe 25 counts of bright fringes is equal to 25 times the wavelength of the light. In this case, the laser wavelength is 632.8 nm, so the distance moved by the mirror is 25 × 632.8 nm = 15,820 nm.

b) The number of bright fringes produced by a Michelson interferometer is proportional to the distance moved by the mirror. In this case, the mirror moved a distance L and produced 30 bright fringes. If the mirror is moved a distance of 3L, then the number of bright fringes will be 3 × 30 = 90.

Find out more on Michelson interferometer here: https://brainly.com/question/16749752

#SPJ4

Complete question:

3.Michelson Interferometer A) Find The Distance Moved By The Mirror To Observe 25 Counts Of Bright Fringes Given That The Laser Wavelength Is 632.8 Nm: B) If The Mirror Moved A Distance L. Produces 30 Counts Of Bright Fringes, When The Mirror Was Moved By 3L How Many Counts Of Bright Fringes Would Be Observed?

Among the given options, the factor in the atmosphere that is most responsible for changes in an area’s temperatures and humidity levels is the movement of large air masses.

An air mass is a large volume of air that has reasonably uniform characteristics of temperature and humidity. An air mass forms when a large area of Earth's surface experiences broadly the same climatic conditions for a significant period of time. Air masses are called continental or maritime depending on whether they come from a land or sea source. An air mass is named after the surface from which it originates. For example, an air mass formed over the Arctic is referred to as an Arctic air mass.

Air masses are responsible for the variations in temperature and humidity in a given area. The movement of large air masses is caused by differences in atmospheric pressure. The differences in air pressure are created by variations in air temperature. As warm air rises and cool air sinks, air pressure changes. This is a never-ending process that creates differences in air pressure that cause air masses to move from one area to another. Air masses carry the temperature and moisture characteristics of the area where they were formed.

Hence, when an air mass moves into a new region, it will bring with it the weather conditions of the region where it originated.

To learn more about atmosphere visit;

https://brainly.com/question/32358340

#SPJ11

When the force on two charged spheres is tripled, the distance between them becomes approximately 3.16 cm.

Let's denote the initial distance between the charged spheres as [tex]$d_1$[/tex] and the final distance as [tex]$d_2$[/tex]. According to Coulomb's law, the force between two charged spheres is inversely proportional to the square of the distance between them.

The relationship between the forces and distances can be expressed as:

[tex]\[\frac{F_2}{F_1} = \left(\frac{d_1}{d_2}\right)^2\][/tex]

where [tex]$F_1$[/tex] is the initial force and [tex]$F_2$[/tex] is the final force. Given that the force is tripled, we have:

[tex]\[\frac{3F_1}{F_1} = \left(\frac{d_1}{d_2}\right)^2\][/tex]

Simplifying the equation, we get:

[tex]\[3 = \left(\frac{d_1}{d_2}\right)^2\][/tex]

Taking the square root of both sides, we find:

[tex]\[\sqrt{3} = \frac{d_1}{d_2}\][/tex]

Rearranging the equation to solve for [tex]$d_2$[/tex], we have:

[tex]\[d_2 = \frac{d_1}{\sqrt{3}}\][/tex]

Substituting the initial distance of [tex]$d_1 = 7.93$[/tex] cm, we can calculate the final distance [tex]$d_2$[/tex]:

[tex]\[d_2 = \frac{7.93}{\sqrt{3}} \approx 3.16 \text{ cm}\][/tex]

Therefore, when the force on each charged sphere is tripled, the distance between them becomes approximately 3.16 cm.

To learn more about force refer:

https://brainly.com/question/12970081

#SPJ11

The main reason why it is usually harder to create a photograph that has a smooth, shallow depth of field with a phone camera is because of its limited aperture.

The aperture of a camera is the opening that allows light to enter the lens. It is the part of the camera that controls the amount of light that is let into the camera's sensor or film.An aperture is measured in f-stops and typically ranges from f/1.2 to f/16. The f-number determines the size of the aperture and how much light is allowed in.

                                         The lower the f-number, the larger the aperture and the more light it allows in. When taking a picture with a shallow depth of field, the photographer will use a low f-number, which will create a large aperture. This will allow the background to blur and the subject to be in focus. However, most phone cameras have a fixed aperture, meaning they cannot be changed by the user. This makes it difficult to create a smooth, shallow depth of field.

Learn more about lens

brainly.com/question/29834071

#SPJ11

Out of the given options, the ball with the least momentum is the 750 g ball moving at 15 m/s with a momentum of 11.25 kg m/s.

The momentum of an object is defined as the product of its mass and velocity. To determine which object has the least momentum, we need to calculate the momentum of each object given in the options and then compare them. Let's do it one by one: a. 2 kg ball moving at 8 m/s The momentum of the ball is given by: momentum = mass x velocity, momentum = 2 kg x 8 m/s = 16 kg m/s

b. 750 g ball moving at 15 m/s The mass of the ball is 750 g, which is 0.75 kg. The momentum of the ball is given by: momentum = mass x velocity , momentum = 0.75 kg x 15 m/s = 11.25 kg m/s

c. 80 kg ball moving at 25m/s The momentum of the ball is given by: momentum = mass x velocity, momentum = 80 kg x 25 m/s = 2000 kg m/s

d. 12 kg ball moving at 1.25The momentum of the ball is given by: momentum = mass x velocity, momentum = 12 kg x 1.25 m/s = 15 kg m/s. Therefore, out of the given options, the ball with the least momentum is the 750 g ball moving at 15 m/s with a momentum of 11.25 kg m/s.

Learn more about Momentum:https://brainly.com/question/30337879

#SPJ11

Resilience refers to the ability to recover and adapt from disasters or shocks. The total population in an area can affect resilience, as a higher population can strain resources and infrastructure.

Resilience is the ability of a system or community to bounce back from a disaster or shock, adapting and recovering effectively. The total population in an area can have an impact on resilience.

In densely populated regions, such as urban areas, a higher population can strain resources, infrastructure, and services, making it more challenging to respond to and recover from disasters. Limited resources and overcrowding can lead to inadequate support and slower recovery.

When comparing the impact of disasters in the USA and Haiti, there are notable differences. While the USA may experience more economic loss, it often has a lower death toll compared to Haiti.

This can be attributed to several factors, including better infrastructure, stronger building codes, advanced warning systems, and greater preparedness measures in the USA. These factors enable the population to evacuate or seek shelter in a timely manner, reducing the loss of life. In contrast, Haiti faces challenges such as poverty, inadequate infrastructure, and limited resources, making it more vulnerable to the impacts of disasters.

A nation's response to a disaster is not solely determined by its demographics but is influenced by a range of factors. Demographics can play a role, as population density and distribution can affect resource allocation and the availability of emergency services.

However, other factors such as access to resources, infrastructure, governance, socio-economic conditions, and preparedness efforts also significantly influence a nation's ability to respond effectively to disasters. Collaborative efforts, international aid, and disaster management strategies are crucial in mitigating the impact of disasters and reducing vulnerability.

When considering Earth's carrying capacity and population growth, various factors are likely to slow down population growth. Improved access to education, particularly for women, can lead to lower birth rates as individuals make informed choices about family planning.

Quality healthcare services, including reproductive health care and access to contraceptives, also contribute to reducing population growth. Additionally, economic development, poverty alleviation, and sustainable practices can create conditions where families opt for smaller family sizes.

The suggestion of solving overpopulation by colonizing other planets is a complex and futuristic concept. While it may seem like a solution, it is crucial to prioritize sustainable practices and resource management on Earth. Colonizing other planets poses significant technological, logistical, and ethical challenges.

Instead, focusing on sustainable development, resource conservation, and addressing socio-economic issues on Earth should be the primary approach to tackling the overpopulation problem. By adopting responsible practices and ensuring equitable distribution of resources, we can strive for a more sustainable future.

Learn more about population density here:

https://brainly.com/question/16894337

#SPJ11

A Teflon block of mass 5.00 kg slides to the right on a steel floor under the influence ofan external applied force that is directed toward the right and has magnitude 3.00 N.(1)The magnitude of the normal force is 49.0 N.(2)Net force = 1.04 N.(3)The magnitude of the acceleration experienced by the block is 0.208 m/s².

(1)The magnitude of the normal force with which the floor pushes on the block is equal to the weight of the block since there is no vertical acceleration.

Weight = mass * gravitational acceleration

Weight = 5.00 kg * 9.8 m/s²

Weight = 49.0 N

Therefore, the magnitude of the normal force is 49.0 N.

The magnitude of the frictional force acting on the block can be calculated using the equation

Frictional force = coefficient of friction * normal force

Assuming a coefficient of friction of 0.04 between steel and Teflon, we can calculate:

Frictional force = 0.04 * 49.0 N

Frictional force = 1.96 N

So, the magnitude of the frictional force acting on the block is 1.96 N.

(2)  The magnitude of the acceleration experienced by the block can be calculated using Newton's second law:

Net force = mass * acceleration

The net force acting on the block is the applied force minus the frictional force:

Net force = applied force - frictional force

Net force = 3.00 N - 1.96 N

Net force = 1.04 N

(3)Now, we can calculate the acceleration:

Acceleration = Net force / mass

Acceleration = 1.04 N / 5.00 kg

Acceleration = 0.208 m/s²

So, the magnitude of the acceleration experienced by the block is 0.208 m/s².

To learn more about coefficient of friction visit: https://brainly.com/question/14121363

#SPJ11

Final-term performance task no. 2 Volume of Solids 1. A hardwood rectangular hollow box with 10-inch height and 6-inch and 8-inch outer borders. The uniform thickness of the box is 1 in :

1. Wooden box: material used = 165 cubic inches, blocks that fit = 165

2. Water tank: volume of water = 120π cubic inches

3. Frustum: lateral area = 140 square meters, total surface area = 240 square meters, volume = 368π cubic inches

4. Hill: amount of earth removed = 220000 cubic meters

Here is the explanation :

1. a. The amount of material used is the difference between the outer volume and the inner volume. The outer volume is 6810 = 480 cubic inches. The inner volume is 579 = 315 cubic inches. The difference is 480-315 = 165 cubic inches.

b. The number of wooden blocks that will fit into the box is the volume of the box divided by the volume of a single block. The volume of the box is 165 cubic inches. The volume of a single block is 1 cubic inch. The number of blocks that will fit is [tex]\frac{165}{1}[/tex] = 165 blocks.

2. The volume of water in the tank is the volume of the cone times the fraction of the cone that is filled with water. The volume of the cone is [tex]\begin{equation}\frac{1}{3}\pi r^2 h = \frac{1}{3}\pi 6^2 12 = 288 \pi \text{ cubic inches}[/tex]. The fraction of the cone that is filled with water is [tex]\frac{5}{12}[/tex]. The volume of water in the tank is 288 pi * [tex]\frac{5}{12}[/tex] = 120 pi cubic inches.

3. a. The lateral area of the frustum is the area of the curved surface. The curved surface is made up of two triangles and a rectangle. The area of a triangle is ([tex]\frac{1}{2}[/tex])base height. The base of each triangle is 8 meters and the height is 10 meters. The area of each triangle is ([tex]\frac{1}{2}[/tex])810 = 40 square meters. The area of the rectangle is 610 = 60 square meters. The total area of the curved surface is 402 + 60 = 140 square meters.

b. The total surface area of the frustum is the area of the curved surface plus the area of the two bases. The area of the two bases is 8² = 64 square meters + 6² = 36 square meters = 100 square meters. The total surface area is 140 + 100 = 240 square meters.

c. The volume of the frustum is the volume of the whole pyramid minus the volume of the smaller pyramid. The volume of the whole pyramid is [tex]\begin{equation}\frac{1}{3}\pi r^2 h = \frac{1}{3}\pi 8^2 10 = 512 \pi \text{ cubic inches}[/tex]. The volume of the smaller pyramid is [tex]\begin{equation}\frac{1}{3}\pi(6^2)(10) = 144\pi \text{ cubic inches}[/tex]. The volume of the frustum is 512 pi - 144 pi = 368 pi cubic inches.

4. The amount of earth removed is the volume of the prismatoid. The volume of the prismatoid is the area of the lower base times the height plus the area of the right triangle times the height. The area of the lower base is 160100 = 16000 square meters. The area of the right triangle is ([tex]\frac{1}{2}[/tex])60200 = 6000 square meters. The height of the prismatoid is 10 meters. The volume of the prismatoid is 1600010 + 6000*10 = 220000 cubic meters.

To know more about the prismatoid refer here :

https://brainly.com/question/28192146#

#SPJ11

Complete question :

Performance Task 2 (Final term) Volume of Solids 1. A wooden rectangular hollow box has outer edges of 6 in and 8 in. and height of 10 in. The uniform thickness of the box is 1 in. a. Find the amount of the material used b. How many wooden blocks each cube with 1 in. edge will fit into the box? 2. A water tank is in the form of a right circular cone with a base radius 6 ft and a slant height of 12 ft. find the volume of the water when the tank is filled to a depth of 5 ft. 3. Consider a frustum of a regular pyramid. The upper base is a square of side equal to 6 meters while the lower base is also a square of side 8 meters and an altitude of 10 meters. Find the following: a. Lateral area b. Total surface area c. Volume 4. In a certain railroad landslide cleaning operation in Baguio there was a need to remove a portion of a hill which was in the shape of a prismatoid. The lower base is a rectangle and the upper base is a right triangle. GE | AB, EF AC and all face angles at E and A are right angles. The height of the solid is 10 m. find the amount of earth removed. 160 100 M G B 200 C 60

it takes 0.70 seconds for energy to travel directly from the air gun to the first hydrophone (no bounces).

Given,

B seawater velocity = 1478 m/s

water depth = 509 m

sandstone velocity = 2793 m/s

thickness = 1003 mmudstone

velocity = 2240 m/s

thickness = 373 m

Energy source is Air GunAngle of incidence = 9°

Let's calculate the time taken for energy to travel directly from the air gun to the first hydrophone (no bounces).

From the given information, we can calculate the distance traveled by energy.Let's calculate the distance travelled by the energy to reach the first hydrophoneDistance travelled in water (d1) = velocity * time takenLet, t1 be the time taken to reach the seafloor

t1 = (2 * depth) / Bw= (2 * 509) / 1478w = 1.37 s

Distance travelled in sandstone (d2) = velocity * time takenLet, t2 be the time taken to travel through sandstone t2 = thickness / Vs= 1003 / 2793t2 = 0.359 s

Distance travelled in mudstone (d3) = velocity * time takenLet, t3 be the time taken to travel through mudstone t3 = thickness / Vm= 373 / 2240t3 = 0.166 s

Let's calculate the distance travelled by the energy to reach the first hydrophoneD1= sin(9°) * Dwhere, D is the distance between the air gun and the first hydrophone.

Using Pythagoras theorem, we can find the distance D.

D² = d1² + d2² + d3² + D1²Now, D = sqrt(d1² + d2² + d3² + D1²)

Time taken to travel directly from the air gun to the first hydrophone (no bounces) = (D1) / (1478) + (D2) / (2793) + (D3) / (2240)

Where D1, D2 and D3 are calculated asD1= sin(9°) * DD² = d1² + d2² + d3² + D1²D = 6560 mD1 = 1034.5 mD2 = D3 = 0By substituting the values, we get

Time taken to travel directly from the air gun to the first hydrophone (no bounces) = (D1) / (1478) + (D2) / (2793) + (D3) / (2240)= 0.70 s

Therefore, it takes 0.70 seconds for energy to travel directly from the air gun to the first hydrophone (no bounces).

learn more about hydrophone here

https://brainly.com/question/2189435

#SPJ11

The satellite travels approximately 1,798.07 km in 1 hour. The circumference of the satellite's orbit is 8,600π km, and the satellite orbits Mars every 15 hours.

To find out how far the satellite travels in 1 hour, we need to determine its orbital circumference.

The circumference of a circular orbit can be calculated using the formula:

C = 2πr

where C is the circumference and r is the radius of the orbit.

In this case, the satellite is orbiting Mars, which has a radius of approximately 3,300 km. The satellite is 1,000 km above the surface of Mars. Therefore, the radius of the satellite's orbit is the sum of the radius of Mars and the distance above the surface:

r = 3,300 km + 1,000 km = 4,300 km

Now we can calculate the circumference:

C = 2π(4,300 km) = 8,600π km

Since the satellite orbits Mars every 15 hours, the distance traveled in 1 hour is 1/15th of the circumference:

[tex]\begin{equation}\text{Distance traveled in 1 hour} = \frac{1}{15} \cdot 8600\pi \text{ km}[/tex]

Calculating this value gives us:

Distance traveled in 1 hour ≈ 1,798.07 km

Therefore, the satellite travels approximately 1,798.07 km in 1 hour.

To know more about the circumference refer here :

https://brainly.com/question/17191505#

#SPJ11

The partial pressure of helium in the scuba tank is 2803 Pa, and the total pressure in the scuba tank is 13544 Pa. Partial pressure of a gas is the pressure that the gas would exert if it were present alone in the same container. The total pressure in the tank is the sum of the partial pressures of all the gases in the tank.

The partial pressure of each gas can be calculated using the ideal gas law, which relates the pressure, volume, amount, and temperature of a gas. The ideal gas law is given by PV = nRT,

where P is the pressure, V is the volume, n is the amount (in moles), R is the gas constant, and T is the temperature (in Kelvin).

The gas constant R has the value of 8.314 J/(mol K).

Given that 114 L of oxygen and 30.0 L of helium at STP (273.15 K and 1.00 bar) are pumped into a scuba tank with a volume of 9.6 L.

At STP, 1 mole of any gas occupies 22.4 L of volume.

Therefore, the number of moles of oxygen present in the scuba tank is equal to the number of moles of helium present in the scuba tank.

The number of moles of oxygen is equal to 114/22.4 = 5.09 moles.

The number of moles of helium is equal to 30.0/22.4 = 1.34 moles.

The total number of moles of gas present in the scuba tank is equal to 5.09 + 1.34 = 6.43 moles.

The temperature of the scuba tank is given to be 25 degrees Celsius.

To convert this temperature to Kelvin, we add 273.15 to get 298.15 K.

Using the ideal gas law, we can calculate the partial pressure of each gas in the scuba tank as follows:

Partial pressure of oxygen = (nRT/V)O2 = (5.09 mol)(8.314 J/(mol K))(298.15 K)/(9.6 L) = 10741 Pa

Partial pressure of helium = (nRT/V)

He = (1.34 mol)(8.314 J/(mol K))(298.15 K)/(9.6 L)

= 2803 Pa

The total pressure in the scuba tank is the sum of the partial pressures of oxygen and helium.

Total pressure = partial pressure of oxygen + partial pressure of helium

= 10741 Pa + 2803 Pa = 13544 Pa.

Therefore, the partial pressure of oxygen in the scuba tank is 10741 Pa, the partial pressure of helium in the scuba tank is 2803 Pa, and the total pressure in the scuba tank is 13544 Pa.

To learn more about pressure visit;

https://brainly.com/question/30673967

#SPJ11

The total work they do on the supertanker is 1360J.

To find the total work done by the two tugboats on the supertanker, we need to calculate the work done by each tugboat and then add them together.

The work done by a force can be calculated using the equation:

Work = Force * Displacement * cos(theta)

where:

Force is the magnitude of the force applied

Displacement is the magnitude of the displacement

theta is the angle between the force and displacement vectors

For the first tugboat:

Force = 2.2 x 10^6 N

Displacement = 0.68 km = 0.68 x 10^3 m=680m

theta = 14° west of north

Using the equation above, we can calculate the work done by the first tugboat:

Work1 = Force * Displacement * cos(theta)

For the second tugboat:

Force = 2.2 x 10^6 N

Displacement = 0.68 km = 0.68 x 10^3 m=680m

theta = 14° east of north

Similarly, we can calculate the work done by the second tugboat:

Work2 = Force * Displacement * cos(theta)

To find the total work done by the two tugboats, we can add the individual works together:

Total Work = 680+680=1360J

Learn more about Force:https://brainly.com/question/12785175

#SPJ11

The functions (a) [tex]f(x) = 3x_1 + 2x^2 + 4x_2 + x^2 - 2x_1x_2[/tex] can be classified as concave, and (b)[tex]f(x) = x_1x_2[/tex] can be classified as neither convex nor concave.

(a) To determine the convexity or concavity of a function, we need to examine the second derivative. If the second derivative is positive, the function is convex, while if it is negative, the function is concave. For (a) [tex]f(x) = 3x_1 + 2x^2 + 4x_2 + x^2 - 2x_1x_2[/tex], calculating the second derivative with respect to [tex]x_1[/tex] and [tex]x_2[/tex], we find that the mixed partial derivative is -2, which is negative. Hence, this function is concave.

(b) For (b) [tex]f(x) = x_1x_2[/tex], we calculate the second derivative and find that it is zero. In this case, since the second derivative does not have a definite sign, we cannot classify the function as either convex or concave. Therefore, it is neither convex nor concave.

To further understand  concave here:

https://brainly.com/question/31541552

#SPJ11

Periodic comets orbit the Sun in low inclination orbits near the ecliptic, have long periods (1000s of years), and often originate in the Oort Cloud. Non-periodic comets, on the other hand, have mostly prograde orbits and are often the most bright and spectacular of comets.

Periodic comets have well-defined orbits around the Sun and follow predictable patterns. They typically have low inclination orbits, meaning their paths are close to the ecliptic plane where most planets reside. These comets have long orbital periods, often taking thousands of years to complete a full orbit around the Sun. They are believed to originate from the Oort Cloud, a distant and icy region of the solar system beyond the Kuiper Belt.

Non-periodic comets, also known as long-period comets, have more unpredictable orbits. They may have highly elongated and eccentric orbits that bring them close to the Sun after long intervals. These comets often have highly inclined orbits, meaning they are not confined to the plane of the ecliptic and can approach the Sun from various angles. Non-periodic comets are known for their brightness and spectacular displays, as they can accumulate more volatile materials during their infrequent visits to the inner solar system. They are thought to originate from different sources, including the Oort Cloud, Kuiper Belt, or even interstellar space.

To learn more about comets  refer:

https://brainly.com/question/29848984

#SPJ11

The average distance of the moon from the sun is approximately 1 astronomical unit (AU).

An astronomical unit is defined as the average distance between the Earth and the Sun, which is about 149.6 million kilometers or 93 million miles. The moon orbits the Earth, not the Sun. Its average distance from the Earth is approximately 384,400 kilometers or 238,900 miles. Therefore, when considering the moon's distance from the sun, we can approximate it as the same distance as the Earth's distance from the sun. The average distance of the moon from the sun being 1 AU is a result of the moon being relatively close to the Earth in comparison to the vast distances involved in our solar system. This distance is crucial for maintaining the stability of the Earth-moon system and ensures that the moon remains within the gravitational influence of the Sun-Earth system.

Learn more about astronomical unit here:

https://brainly.com/question/30393278

#SPJ11

The given statement "if the period of a pendulum is triple, then the frequency will also increase" is False.

If the period of a pendulum is tripled, then the frequency will decrease. The period and frequency of a pendulum are inversely proportional.

A pendulum is a weight suspended from a pivot that is free to swing back and forth due to the force of gravity. A classic example is a pendulum clock. The pendulum's back-and-forth motion is known as its oscillation. The time it takes for one complete oscillation, also known as one cycle, is known as the pendulum's period.

Frequency and period are inversely proportional. The frequency of a wave or oscillation is the number of cycles it completes in one second, while the period is the amount of time it takes to complete one cycle. The frequency is calculated by dividing the number of cycles completed by the time taken to complete them.

The frequency and period are linked mathematically. Period = 1/frequency. The frequency and period of a pendulum are inversely proportional. A pendulum's frequency decreases as its period increases.

To know more about pendulum's frequency, refer to the link below:

https://brainly.com/question/15743599#

#SPJ11

In titrating an unknown basic solution with an acidic solution, the known concentration acid is gradually added until the neutralization point is reached and indicated by a color change using an indicator.

Titrating an unknown basic solution with an acidic solution involves slowly adding the acid to the base while monitoring the pH using an indicator or pH meter. The process begins with measuring a known volume of the basic solution and transferring it to a flask.

Then, a few drops of indicator are added. The acidic solution is gradually added from a burette until the endpoint is reached, indicated by a color change or pH shift. The volume of acid used is recorded to calculate the concentration of the unknown basic solution using stoichiometry.

Learn more about titration, here:

https://brainly.com/question/31483031

#SPJ1

A mixture of solute and solvent is called a solution. The solution is of acidic and basic solution. An acidic solution is a solution in which hydrogen ions (positively charged ions) are released when mixed with water. The pH range is below 1-7.

A basic solution is a solution in which hydroxyl ions (negatively charged ions) are released when mixed with water. The pH range is above 7-14. Titration is the process of the known concentration of the solution is used to determine the concentration of another solution.

When adding the indicator and then slowly add the acidic concentration till it becomes neutral whereas indicator is the organic compound that changes the color of the solution if it is acid or base. This is the process of titrating an unknown basic solution with an acidic solution of known concentration.

To learn more about Acid and base solutions:

https://brainly.com/question/32386739

#SPJ1

A balloon with a radius of 16 cm has an electric charge of 4.25 x 10°C. The electric field strength at a distance of 40.0 cm from the balloon's center is approximately 1.524 x 10^4 N/C.

To determine the electric field strength at a distance of 40.0 cm from the balloon's center, we can use Coulomb's law. Coulomb's law states that the electric field strength (E) at a point is directly proportional to the magnitude of the electric charge (Q) and inversely proportional to the square of the distance (r) from the charge.

The formula for the electric field strength is:

E = k * (Q / r^2)

where:

E is the electric field strength,

k is the electrostatic constant (k ≈ 8.99 x 10^9 Nm^2/C^2),

Q is the electric charge, and

r is the distance from the charge.

Given:

Radius of the balloon (r) = 16 cm = 0.16 m

Electric charge (Q) = 4.25 x 10^(-6) C

Distance from the balloon's center (r) = 40.0 cm = 0.40 m

Let's calculate the electric field strength (E):

E = k * (Q / r^2)

E = (8.99 x 10^9 Nm^2/C^2) * (4.25 x 10^(-6) C / (0.40 m)^2)

E = (8.99 x 10^9 Nm^2/C^2) * (4.25 x 10^(-6) C / 0.16 m^2)

E = (8.99 x 10^9 Nm^2/C^2) * (4.25 x 10^(-6) C / 0.0256 m^2)

E = (8.99 x 10^9 N * 4.25 x 10^(-6)) / 0.0256 m^2

E = 1.524 x 10^4 N/C

Therefore, the electric field strength at a distance of 40.0 cm from the balloon's center is approximately 1.524 x 10^4 N/C.

To learn more about electric field visit: https://brainly.com/question/19878202

#SPJ11

The best way for a tennis enthusiast to estimate the mean length of tennis matches is to conduct a statistical study by collecting data on the lengths of matches. Two matches should be in a sample to estimate the mean length.

The enthusiast can gather data from various sources such as tournament websites, sports magazines, and databases. Estimating the mean length of tennis matches requires collecting data and conducting a statistical study.

To get a reliable estimate of the mean length of tennis matches, a tennis enthusiast can collect data on the lengths of matches played in various tournaments. They can collect data from tournament websites, sports magazines, and databases such as the International Tennis Federation.

Once the data is collected, the enthusiast can use statistical tools such as mean, median, and mode to estimate the average length of tennis matches. Another way to get a more accurate estimate is to calculate the standard deviation of the data.

By doing this, the enthusiast can get an idea of the spread of the data, which can help to identify outliers or unusual matches that may affect the mean. In conclusion, conducting a statistical study by collecting data is the best way to estimate the mean length of tennis matches.

Know more about mean length, here:

https://brainly.com/question/16526320

#SPJ11

Answer:

The answer is 1.4s

The answer is 5

Bounces off the boundary

Explanation:

[tex]curreny = \frac{quantity \: of \: charge}{time} [/tex]

[tex]i = \frac{q}{t} [/tex]

making t the subject of formula

t=Q/I

t=2.5/1.8

t=1.4s

To find the time required, we can use the equation Q = It, where Q is the charge, I is the current, and t is the time. Rearranging the equation to solve for t, we have t = Q/I. Plugging in the given values, t = 2.5 C / 1.8 A. Evaluating this expression gives t ≈ 1.39 s.

Therefore, the correct answer is c. 1.4 s.

1. When a ray of light hits a boundary and reflects, but does not refract, the characteristics observed are:

2. The ray changes direction: When the light ray reflects, it bounces off the boundary at an angle determined by the law of reflection.

3. The ray does not change direction: Refraction refers to the bending of light as it passes from one medium to another. When the ray only reflects, it does not change its direction as it remains within the same medium.

5. The ray bounces off the boundary: Reflection occurs when the ray of light strikes the boundary and returns back into the same medium.

6. The ray does not pass through the boundary: Refraction involves the transmission of light across the boundary, whereas reflection does not allow the light to pass through.

In summary, the characteristics observed when a ray hits a boundary and reflects, but not refracts, are: the ray changes direction, does not change speed, bounces off the boundary, and does not pass through the boundary.

To learn more about current refer:

https://brainly.com/question/1256531

#SPJ11

The magnetic field lines produced by a straight wire with a current entering the paper are exit the wire in a radially outward direction. Option (C) is correct.

The direction of magnetic field lines produced by a straight wire with a current entering the paper is such that they exit the wire in a radially outward direction. This indicates that the magnetic field is directed in a clockwise direction when viewed from the opposite end.

The concentric circles formed around the wire are counterclockwise, which indicates that the magnetic field is also directed in a counterclockwise direction when viewed from above the wire.

The magnetic field lines produced by a straight wire with a current entering the paper can be determined using the right-hand rule. Curl your right hand such that your fingers point in the direction of the current, and your thumb will point in the direction of the magnetic field.

Know more about magnetic field, here:

https://brainly.com/question/14848188

#SPJ11