the new Y = $965 and the multiplier for government expenditure = 3.33.
In the Keynesian cross model, if the consumption function is given by C = $170 +0.7(Y-T), and planned investment is $100; government purchases and taxes are both $100. If government purchases increase to $115, the new equilibrium income and multiplier for government purchases are explained below:
Solutions: a) The equilibrium level of income is obtained where the planned aggregate expenditure is equal to the aggregate production of goods and services. The Keynesian cross model equation can be written as:
Y = C + I + G + NX,
Where, Y = Aggregate output C = Consumption expenditure I = Planned investment G = Government expenditure
NX = Net export= -20Y + 20(100)
Here, the consumption expenditure is given as C = $170 + 0.7(Y-T)
Putting Y for the income, T for taxes and substituting the values we get, C = $170 + 0.7(Y - T)C
= $170 + 0.7(Y - 100)C
= $70 + 0.7Y
Therefore, the aggregate output equation can be written as follows:
Y = 70 + 0.7Y + 100 + 0 - 20YY
= 850
The equilibrium income is 850.
b) The multiplier for government expenditure (G) can be calculated as follows:
Multiplier = ΔY / ΔGHere, ΔG = Increase in government expenditure
Multiplier = [1 / (1 - MPC)] Here, MPC = Marginal Propensity to Consume = 0.7
Therefore, Multiplier = [1 / (1 - 0.7)] = 3.33The multiplier for government expenditure is 3.33.
c) If government purchases increase to $115, the new government expenditure will be G = $115
Substituting this value in the aggregate output equation,
we get, Y = 70 + 0.7Y + 100 + 0 - 20 + 115Y
= 965
The new equilibrium income is $965.
Therefore, the new Y = $965 and the multiplier for government expenditure = 3.33.
To know more about taxes visit:
https://brainly.com/question/12611692
#SPJ11
4. Suppose for the Keynesian model.
Y = C(Y − T) + I(r) + G + NX
C(Y − T) = C0 + C1(Y − T)
(Represents graphically using the Keynesian model each of
the following subsections) What happens to spending and production if:
a) The government plans to spend more. (Red)
b) The government decides to reduce taxes. (Green)
c) Investors decide to make a smaller investment. (Blue)
d) Suppose that the real interest rate decreases, that is, r1 < r.
(Pink)
a) If the government plans to spend more (red), then this would result in an increase in spending.
As government spending is a component of aggregate demand (AD), this would shift the AD curve to the right. This shift in the AD curve would lead to an increase in output (Y), an increase in the equilibrium level of income and production (output), and an increase in the price level. b) If the government decides to reduce taxes (green), then this would result in an increase in consumption and investment.
Since consumption and investment are components of aggregate demand (AD), this would shift the AD curve to the right. This shift in the AD curve would lead to an increase in output (Y), an increase in the equilibrium level of income and production (output), and an increase in the price level.
c) If investors decide to make a smaller investment (blue), then this would result in a decrease in investment. As investment is a component of aggregate demand (AD), this would shift the AD curve to the left.
This shift in the AD curve would lead to a decrease in output (Y), a decrease in the equilibrium level of income and production (output), and a decrease in the price level. d) Suppose that the real interest rate decreases, that is, r1 < r (pink), then this would result in an increase in investment and consumption.
Since consumption and investment are components of aggregate demand (AD), this would shift the AD curve to the right. This shift in the AD curve would lead to an increase in output (Y), an increase in the equilibrium level of income and production
(output), and an increase in the price level.
So, option a is the correct answer
Learn more about government here,
https://brainly.com/question/24664545
#SPJ11
ORGB 1135 GROUP PROCESS REPORT As per course calendar Value: 2 x 7.5% Date due: each For this assignment, your group is to analyze itself using a minimum of five concepts you have studied in Organizational Behaviour (see attached). Since groups experience different dynamics and circumstances, it is up to your group to decide which concepts you think best fit your situation. You must use appropriate terminology when applying any theories, but do not include any definitions. Also, give adequate support for what you say. Your report is to be a realistic and thoughtful discussion of your group; marks will be based on how much insight you show in analyzing your group. That means, it does not matter if you were a highly functioning group or a completely dysfunctional group. What matters is that you demonstrate an understanding of what went well and/or what did not go so well and why. This is information you can carry forward to your future group projects. You cannot divide up this discussion; if you do, you are missing the point of this assignment. You must meet as a group, in the classroom, on group days to talk about your group. If you wish to meet at other times, that is up to you. Use your Wiki site to write up your discussions so that everyone can review them. Standards Word process your final report using a 12 point, business font, double spacing. Plan for four to six pages in length (exclusive of title page, appendices, charts/graphs, etc.). Please include a cover page, listing each member of your group. In addition, please submit the document in hard copy form, ensuring it is either stapled or encased in a duo tang. Spelling and any grammar errors that interfere with readability will be deducted up to 10% of the value of the assignment. Remember to utilize the rubric expressly when putting together your final process report. In so doing, you may use the various headings (listed thereupon) as subheadings within your paper. While that approach is not requirement, it may ensure easement of presentation. Remember to fully describe/demonstrate each of the major consideration areas reflected in the rubric (e.g., Attitude, Effort, Contribution, Reflection, etc.). As a reminder, you must expressly ground your entire paper in relevant course concepts, start to finish, in APA format. This is because a major purpose of the process report is to demonstrate, using your group's experience, an awareness of key course concepts (in principle and applied forms).
The group is required to analyze itself using a minimum of five concepts from Organizational Behaviour, demonstrating insight into the group dynamics and circumstances.
In this assignment, the group is tasked with reflecting on their own group dynamics and applying concepts from Organizational Behaviour to analyze their experience. The purpose is to gain insights into what worked well and what didn't, and to understand why. The group needs to choose relevant concepts and use appropriate terminology to support their analysis. The report should be realistic and thoughtful, providing a discussion of the group's strengths and weaknesses. It is important to demonstrate an understanding of the concepts and their application to the group's experience. The report should be well-structured, utilizing headings from the provided rubric, and grounded in relevant course concepts in APA format. The aim is to carry forward the learnings from this analysis into future group projects.
Learn more about organizational behaviour here:
https://brainly.com/question/32735930
#SPJ11
The specifications for a manifold gasket that installs between two engine parts calls for a thickness of 2.500 mm +.020 mm. The standard deviation of the process is estimated to be 0.004 mm. The process is currently operating at a mean thickness of 2.50 mm. (a) What are the upper and lower specification limits for this product? (b) What is the Cp for this process? (c) About what percent of all units of this gasket will meet specifications? Does this meet the technical definition of Six Sigma?
(A) The upper specification limit (USL) for the gasket thickness is 2.520 mm, and the lower specification limit (LSL) is 2.480 mm.
(B) The process capability index (Cp) for this process is 0.833.
(C) 99.9999% percent of all units of this gasket will meet specifications
(a) The upper specification limit (USL) can be calculated by adding the maximum allowable tolerance to the mean thickness. Therefore, USL = 2.500 mm + 0.020 mm = 2.520 mm. The lower specification limit (LSL) is calculated by subtracting the maximum allowable tolerance from the mean thickness. Therefore, LSL = 2.500 mm - 0.020 mm = 2.480 mm.
(b) The process capability index (Cp) is a measure of how well a process meets the specifications. Cp is calculated by dividing the tolerance width (the difference between the USL and LSL) by six times the process standard deviation. In this case, the tolerance width is 0.020 mm, and the process standard deviation is 0.004 mm. Therefore, Cp = (USL - LSL) / (6 * standard deviation) = 0.020 mm / (6 * 0.004 mm) = 0.833.
(c) To determine the percentage of units that meet specifications, we need to calculate the proportion of the process within the specification limits. Since the process is normally distributed, we can use the cumulative distribution function (CDF) of the normal distribution to find this proportion. By calculating the z-scores for the USL and LSL using the formula z = (x - mean) / standard deviation, we can find the corresponding probabilities from the standard normal distribution table. Subtracting the cumulative probability of the LSL from the cumulative probability of the USL gives us the proportion of units meeting specifications. If this proportion is greater than 99.99966% (corresponding to a 6-sigma level), then it meets the technical definition of Six Sigma.
In summary, the upper specification limit (USL) for the gasket thickness is 2.520 mm, and the lower specification limit (LSL) is 2.480 mm. The process capability index (Cp) for this process is 0.833. To determine the percentage of units meeting specifications, we need to calculate the proportion of the process within the specification limits using the cumulative distribution function (CDF) of the normal distribution. If this proportion exceeds 99.99966%, it meets the technical definition of Six Sigma.
Learn more about capability index:
brainly.com/question/31977664
#SPJ11
Consider a situation with 3 white and 5 black halls in a hag Four halls are drawn from the bag, without replacement. Write down every possible sample and calculate its probability.
The probability of choosing four halls with three white and five black halls in a bag without replacement is 0.1484. The sample space consists of 70 possible outcomes.
The total number of halls in the bag is eight, of which three are white and five are black. We are drawing four halls from the bag without replacement. So, the possible samples can be determined using the formula,
nC = n! / (n-r)!r! where n is the total number of halls in the bag, and r is the number of halls being drawn.
Therefore, the number of possible samples of four halls from a bag of eight halls is given by
8C4 = 8! / (8-4)!4! = 70
Now, we need to calculate the probability of getting four halls, of which three are white and five are black.
P(3 white and 1 black) + P(2 white and 2 black) + P(1 white and 3 black) =
3C3 x 5C1 / 8C4 + 3C2 x 5C2 / 8C4 + 3C1 x 5C3 / 8C4
= 5/35 + 30/70 + 15/35
= 0.1484
Therefore, the probability of choosing four halls with three white and five black halls in a bag without replacement is 0.1484. The sample space consists of 70 possible outcomes.
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
Understanding Different Types of Credit
Sort each scenario into the correct category based on the type of credit it represents.
Easy-Access Credit Open-End Credit Closed-End Credit
title loan with collateral car loan
two-week payday loan
credit card
home loan
$2000 monthly line of credit
Easy-Access Credit A type of credit that is easy to access and can be used repeatedly is called easy-access credit.
Credit cards are the most common example of easy-access credit. This is because they are often offered to a wide range of consumers and can be used repeatedly. The scenario that matches this type of credit is the credit card. The main answer is credit card. Open-End Credit Open-end credit is a type of credit that is offered to a borrower with a predetermined maximum amount of credit.
You can use this type of credit repeatedly as long as you pay back the amount you borrowed. A monthly credit line of $2000 is an example of open-end credit. The main answer is $2000 monthly line of credit. Closed-End Credit A type of credit that has a set amount of credit that can be borrowed and is often secured by collateral is called closed-end credit.
To know more about Easy-Access Credit visit:-
https://brainly.com/question/19746564
#SPJ11
Dock Guard, which uses a standard cost accounting system, manufactured 210,000 boat fenders during the year, using 1,310,000 m of extruded vinyl purchased at $1.25 per metre. Production required 4,600 direct labour hours that cost $14.00 per hour. The materials standard was 6 m of vinyl per fender at a standard cost of $1.30 per metre. The labour standard was 0.026 direct labour hour per fender at a standard cost of $13.00 per hour. Compute the price and efficiency variances for direct materials and direct labour. Does the pattern of variances suggest Dock Guard's managers have been making trade-offs? Explain. Begin by determining the formula for the price variance, then compute the price variances for direct materials (DM) and direct labour (DL). (Enter the results as positive numbers. Label each variance as favourable (F) or unfavourable (U).) = Price variance ) X
Price variance formula is:P=(AP−SP)×Q, where AP is the actual price per unit of input, SP is the standard price per unit of input, and Q is the actual quantity of input used. Dock Guard's price variance for direct material is:Price variance=(Actual price−Standard price)×Actual quantity=(1.25−1.30)×1,310,000=$−65,000 (unfavorable) .
In this case, the actual price was less than the standard price. This led to an unfavorable price variance.Dock Guard's price variance for direct labor is:Price variance=(Actual rate−Standard rate)×Actual hours=(14.00−13.00)×4,600=$4,600 (favorable)In this case, the actual rate was greater than the standard rate. This led to a favorable price variance.Dock Guard's efficiency variance for direct material is:Efficiency variance=(Actual quantity−Standard quantity)×Standard price=(210,000×6−1,310,000)×1.30=$−65,000 (unfavorable)In this case, more vinyl was used to manufacture each fender than the standard. This led to an unfavorable efficiency variance.
Dock Guard's efficiency variance for direct labor is : Efficiency variance=(Actual hours−Standard hours)×Standard rate=(210,000×0.026−4,600)×13=$4,940 (unfavorable)In this case, it took more time to manufacture each fender than the standard. This led to an unfavorable efficiency variance.The pattern of variances suggests Dock Guard's managers have been making trade-offs. They were able to purchase vinyl at a lower cost than the standard but used more of it to manufacture each fender. Similarly, they were able to pay labor at a lower rate than the standard but needed more time to manufacture each fender.
To know more about actual quantityvisit :
https://brainly.com/question/32677538
#SPJ11
12 Part 12 of 15 201 Help Required information. [The following information applies to the questions displayed below) Cardinal Company is considering a five-year project that would require a $2,812.000 investment in equipment with a useful life of five years and no salvage value. The company's discount rate is 16%. The project would provide net operating income in each of five years as follows: Sales Variable expenses $ 2,855.000 1.010,000 1.045,000 Contribution nargin i Fixed expenses Advertising, salaries, and other fixed out-of-pocket costs $790,000 562.400 Depreciation Total fixed expenses 1.360,400 $484,600 Bet operating income Click here to view Exhibit 128-1 and Exhibit 128-2, to determine the appropriate discount factors) using table 12. If the equipment had a salvage value of $300,000 at the end of five years, would you expect the project's simple rate of return to be higher, lower, or the same? O Higher O Lower Same Save & Ext Submit
If the equipment had a salvage value of $300,000 at the end of five years, the project's simple rate of return would be lower. Simple Rate of Return: Simple rate of return is an estimation of the rate of return on the investment when the cash inflow is not uniform over the life of the project. For this purpose, the project's total expected cash inflow and cash outflow over the life of the project are taken into account.
Simple rate of return is calculated by dividing the annual net operating income by the initial investment. Simple rate of return = Annual net operating income/ Initial investment Given, Net operating income in each of five years are as follows: Year 1: $ 790,000 + $484,600 = $1,274,600Year 2: $ 790,000 + $484,600 = $1,274,600Year 3: $ 790,000 + $484,600 = $1,274,600Year 4: $ 790,000 + $484,600 = $1,274,600Year 5: $ 790,000 + $484,600 + $300,000 = $1,574,600Therefore,Annual net operating income = ($1,274,600 x 4) + $1,574,600 = $6,278,000Simple rate of return = $6,278,000/$2,812,000Simple rate of return = 2.23 years If the equipment had a salvage value of $300,000, the initial investment would be $2,812,000 - $300,000 = $2,512,000.
New Simple Rate of Return = ($6,278,000/ $2,512,000)Simple rate of return = 2.5 years Comparing the two, we can see that if the equipment had a salvage value of $300,000 at the end of five years, the project's simple rate of return would be lower. Hence, the correct option is O Lower. years If the equipment had a salvage value of $300,000, the initial investment would be $2,812,000 - $300,000 = $2,512,000.
To know more about Simple rate of return Visit:
https://brainly.com/question/17164328
#SPJ11
Reflect on our review of all the chapters we have covered so far. Prepare a 1.5 page (single spaced) study on the following key topics:
Chapter 1 - Developing Self-Awareness:
What self-awareness concepts do you believe you manage well and what others do you need to work on? How will you improve?
Chapter 2 - Managing Stress & Well-Being:
What do you believe are your main sources of stress? What is your strategy to manage it and how?
Chapter 3 -Problem Solving:
Discuss your ability to problem solve. What concepts do you believe you have and what others do you think you can improve?
In terms of self-awareness concepts, I believe I manage well in understanding my strengths and weaknesses. I have a good grasp of my skills, knowledge, excel.
This self-awareness helps me play to my strengths and seek opportunities to further enhance them. However, one aspect I need to work on is recognizing and managing my emotions effectively. Sometimes, I find it challenging to regulate my emotions in high-pressure situations or during conflicts. To improve this, I plan to practice self-reflection and mindfulness techniques to better understand and control my emotional responses.
One of the main sources of stress for me is the pressure to meet deadlines and handle multiple responsibilities simultaneously. To manage stress effectively, I have developed a strategy that includes prioritization, time management, and self-care. I prioritize tasks based on urgency and importance, which helps me stay focused and productive. Effective time management techniques, such as setting realistic goals, breaking tasks into smaller, manageable steps, and utilizing productivity tools, have proven helpful in reducing stress levels.
Learn more about self-awareness here
https://brainly.com/question/32253066
#SPJ11
Question 3 Whose works should you study if you want to understand the origins of the recognition of the importance of human resources and the personal welfare of workers? O a Robert Owen O b. Charles Babbage O Lillian breth Od Max Weber
The correct answer is option A: Robert Owen. Robert Owen was a prominent social reformer and early advocate for improving working conditions and the welfare of workers during the Industrial Revolution.
He believed in the importance of human resources and recognized the need for better treatment of workers. Owen's works, such as "A New View of Society" and "Report to the County of Lanark," outlined his ideas on labor rights, education, and the well-being of workers. He emphasized the role of employers in ensuring the welfare of their employees and advocated for improved working conditions, shorter working hours, and fair wages.
While Charles Babbage is known for his contributions to computer science, Lillian Gilbreth is known for her work in industrial engineering and ergonomics, and Max Weber is known for his sociological theories on bureaucracy and authority, none of them specifically focused on the origins of recognizing the importance of human resources and worker welfare to the extent that Robert Owen did.
Learn more about Industrial Revolution here:
https://brainly.com/question/855594
#SPJ11
D O 0.20 Question 3 1 pts Plain candies come in various colors. Assume that the distribution of colors for plain candies is as follows: Color Purple Yellow Red Orange Green Blue Brown 10% 17% 19% 18%
Based on the data provided, we have:
Color Percentages
Purple 10%
Yellow 17%
Red 19%
Orange 18%
Green -
Blue -
Brown -
Total 64%
We know that the total percentage adds up to 64%. Hence, we can conclude that the percentage of green candies, blue candies, and brown candies are 100 - 64 = 36%.
The percentage of green candies will be 36% × 18% = 6.48%
The percentage of blue candies will be 36% × 0% = 0%
The percentage of brown candies will be 36% × 0% = 0%
Hence, the distribution of colors for plain candies is as follows:
Color Percentages
Purple 10%
Yellow 17%
Red 19%
Orange 18%
Green 6.48%
Blue 0%
Brown 0%
Total 100%
To learn more about percentage, refer below:
https://brainly.com/question/32197511
#SPJ11
Extreme Manufacturing Company provides the following ABC costing information:
Activities Total Costs Activity-cost drivers
Account inquiry $320,000 16,000 hours
Account billing $200,000 4,000,000 lines
Account verification accounts $173,250 70,000 accounts
Correspondence letters $24,000 4,000 letters
Total costs $717,250
The above activities are used by Departments A and B as follows:
Department A Department B
Account inquiry hours 2,700 hours 4,200 hours
Account billing lines 950,000 lines 750,000 lines
Account verification accounts 8,500 accounts 6,500 accounts
Correspondence letters 1,400 letters 1,800 letters
How much of the account billing cost will be assigned to Department A?
How much of the account verification accounts cost will be assigned to Department B?
The total cost assigned to Department A = $130,895
The total cost assigned to Department B = $148,355
To assign costs to each department, we need to first calculate the activity rate for each activity:
Activity rate = Total cost of activity / Total activity cost driver
Account inquiry rate = $320,000 / 16,000 hours = $20/hour
Account billing rate = $200,000 / 4,000,000 lines = $0.05/line
Account verification rate = $173,250 / 70,000 accounts = $2.47/account
Correspondence rate = $24,000 / 4,000 letters = $6/letter
Now we can use these rates to assign costs to each department:
Department A:
Account inquiry cost = 2,700 hours x $20/hour = $54,000
Account billing cost = 950,000 lines x $0.05/line = $47,500
Account verification cost = 8,500 accounts x $2.47/account = $20,995
Correspondence cost = 1,400 letters x $6/letter = $8,400
The total cost assigned to Department A = $130,895
Department B:
Account inquiry cost = 4,200 hours x $20/hour = $84,000
Account billing cost = 750,000 lines x $0.05/line = $37,500
Account verification cost = 6,500 accounts x $2.47/account = $16,055
Correspondence cost = 1,800 letters x $6/letter = $10,800
The total cost assigned to Department B = $148,355
Therefore, the account billing cost assigned to Department A is $47,500 and the account verification accounts cost assigned to Department B is $16,055.
Learn more about account billing here:
https://brainly.com/question/15722592
#SPJ4
Common stock; $10 par value; 500,000 shares authorized; 200,000 shares issued and outstanding .... ******* .$ 2,000,000 - Paid in capital in excess of par value, common stock - Retained earnings.... ...400,000 ....900,000 $3,300,000 Total The Corporation completed the following transactions in 2021. 1- Jan. 10, Directors declared a $1 per share cash dividend payable on March 15 to the Jan. 31 s 2- Mar. 01, Purchased 10,000 shares of its own common for $15 per share. 3- Mar. 15, Paid the cash dividend declared on Jan. 10. 4- May 01, Sold 6,000 of its treasury shares at $15 cash per share. 5- Sep. 30, Directors declared a 30% stock dividend when the share market price is $16. 6- Nov. 01, Distributed stock dividends declared on Sep. 30. 7- Nov. 15, The company implemented 5-for-1 stock split for the common stock. Required: Prepare journal entries to record each of these transactions for 2021. CLEARLY INDICATE THE DEBITS & CREDITS Example: XYZ Company pays $10,000 cash to purchase land Answer: Dr. Land 10,000 Cr. Cash 10,000 For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). BIUS Paragraph Arial 10pt ||| > >
Here are the journal entries to record each of the transactions for the Arabian Gulf Corporation in 2021:
Jan. 10: Directors declared a $1 per share cash dividend payable on March 15 to the Jan. 31 stockholders of record.
Dr. Retained Earnings $200,000 (200,000 shares x $1 per share)
Cr. Dividends Payable $200,000
Mar. 01: Purchased 10,000 shares of its own common for $15 per share.
Dr. Treasury Stock $150,000 (10,000 shares x $15 per share)
Cr. Cash $150,000
Mar. 15: Paid the cash dividend declared on Jan. 10.
Dr. Dividends Payable $200,000
Cr. Cash $200,000
May 01: Sold 6,000 of its treasury shares at $15 cash per share.
Dr. Cash $90,000 (6,000 shares x $15 per share)
Cr. Treasury Stock $90,000
Sep. 30: Directors declared a 30% stock dividend when the share market price is $16.
Dr. Retained Earnings $96,000 (200,000 shares x 30% x $16 per share)
Cr. Common Stock Dividend Distributable $96,000
Nov. 01: Distributed stock dividends declared on Sep. 30.
Dr. Common Stock Dividend Distributable $96,000
Cr. Common Stock $96,000
Nov. 15: The company implemented a 5-for-1 stock split for the common stock.
Dr. Common Stock (par value) $200,000 (200,000 shares x $10 per share x 5)
Cr. Common Stock Dividend Distributable $200,000
Please note that these entries are based on the given information and the amounts are calculated accordingly. Always consult with a professional accountant or review the specific accounting guidelines applicable to your jurisdiction for accurate and compliant financial reporting.
To know more about Common Stock Dividend click this link -
brainly.com/question/15612505
#SPJ11
Question 1 Koon's is a leading instant noodle producer in Malaysia. In recent years, the company has experienced a rapid growth from international sales. Its products are now producing in Malaysia, Poland and North America and selling in 20 countries across Asia, Europe and North America. The success comes from its product localization, where it varies its instant noodle in ingredients, favours and packaging for buyers in different countries. Currently, Koon's would explore the untapped market in South Africa. (a) Identify and explain any THREE pressures for local responsiveness. Illustrate each pressure with an example from Koon's case. (12 marks) (b) Identify and explain any THREE foreign market entry strategies that Koon's could adopt to enter the South Africa market. Illustrate each strategy with an example from Koon's case. (12 marks) (c) International human resource management is more complex than domestic human resource management. Explain any THREE factors that drive this complexity to Koon's with an example for each factor from Koon's case.
a) A number of factors contribute to the need for local responsiveness, including (i) consumer preferences and preferences; (ii) infrastructure and traditional practices; and (iii) distribution channels.
b) There are three ways Koon's could adopt to enter the South African market:
1. Export
One of the market entry strategies that most companies use when entering the market is exporting. The reason for this is that exporting is one of the easiest ways to reach a foreign market. Exporting involves using agents or distributors.
2. Licensing
Another of the market strategy modes used is licensing. It gives or permits the right to sell the products. The company needs to have a lawyer present during the proceeds.
It is extremely important to have legal assistance during the proceeds. During the proceeds, price agreements are made with the licensees. The licensees pay a fee to get the rights to some things.
3. Joint venture
Another important approach is to have a joint venture (JV), a local partner if the company can find one. A JV is more of an arrangement made by two or more parties or parties with a shared interest or purpose. Both parties share losses, profits, and costs.
c) The practices of international HRM must differ from the practices of national HRM. There are more and more HR activities, a need for a broader perspective, a greater involvement in employees’ personal lives, a strong focus on change in the employee mix, a high exposure to risk, and more outside influences.
i) More and Varied HR Activities:
There are more and more HR activities in international HRM than there are in domestic HRM. In domestic HRM, the number of HR activities that are relevant to domestic HRM increases because they have to be done in a different context.
ii) International HRM requires a much broader view of almost every HR activity than domestic HRM. This means that HR managers must weigh a multitude of factors when deciding on any HR issue in international HRM, many of which are irrelevant in domestic HRM.
iii)When it comes to international HRM, there is a lot of focus on changing the mix of employees, especially when it comes to the nationality of employees. In fact, very often, when an organization opens a business in a different country, it brings in more employees from that country.
To learn more about consumer preferences, refer to the link:
https://brainly.com/question/31065987
#SPJ12
Which of the following goods is directly counted in GDP? A) the ground beef that Taco Bell purchases for use in its burritos B) the tortillas that Taco Bell purchases for its burritos C) the paper wrap that Taco Bell purchases to wrap its burritos D) the Burrito Supreme that Sondra purchases for lunch at Taco Bell
D) The Burrito Supreme that Sondra purchases for lunch at Taco Bell is directly counted in GDP.
GDP (Gross Domestic Product) is a measure of the total value of all final goods and services produced within a country's borders during a specific period. It includes the value of all goods and services consumed by individuals, businesses, government, and net exports (exports minus imports).
In this case, the Burrito Supreme that Sondra purchases for lunch at Taco Bell is a final good, meaning it is a finished product sold directly to the end consumer. Final goods and services purchased by individuals for their own consumption are included in GDP calculations. Therefore, the Burrito Supreme directly contributes to GDP.
To learn more about GDP, visit
brainly.in/question/19817789
#SPJ11
Sato Awards has had a request for a special order of 10 silver-plated trophies from the provincial tennis association. The normal selling price of such a trophy is $384.00 and its unit product cost is $256.00, as shown below: Direct materials Direct labour Manufacturing overhead Unit product cost $136.00 84,00 36.00 $256.00 Most of the manufacturing overhead is fixed and unaffected by variations in how many trophies are produced in any given period. However, $9 of the overhead is variable, depending on the number of trophies produced. The customer would like a special logo applied to the trophies requiring additional materials costing $8 per trophy and would also require acquisition of a special tool costing $480 that would have no other use once the special order was completed. This order would have no effect on the company's regular sales, and the order could be filled using the company's existing capacity without affecting any other order. Required: 8. What effect would accepting this order have on the company's operating income if a special price of $344.00 is offered per trophy for this order? (Do not round intermediate calculations. Round your answer to 2 decimal places.) Net operating income b. Should the special order be accepted at this price? O Yes O No
Trophy Manufacturer - Sato AwardsIn this question, we are asked to identify the effect of accepting the order of 10 silver-plated trophies on the company's operating income if a special price of $344.00 is offered per trophy.
Let's compute this. We know that the normal selling price of the silver-plated trophy is $384.00. But the customer has requested a special logo to be applied to the trophies, which would cost $8 per trophy. This means that the new selling price of the trophy is $384 + $8 = $392 per unit.Now, the company has received a special order for 10 trophies. If the company accepts the special order, they would have to incur an additional cost of $480 for acquiring a special tool.
This cost is only for the special order and would not have any other use once the order is completed. Therefore, this cost would be included in the incremental cost of the order. Let's calculate the incremental cost of producing these special order trophies.Direct materials cost = $136 x 10 = $1,360Direct labor cost = $84 x 10 = $840Variable manufacturing overhead cost = $9 x 10 = $90Additional material cost = $8 x 10 = $80Special tool cost = $480Total incremental cost = $1,360 + $840 + $90 + $80 + $480 = $2,850Now, we need to find out if accepting this special order will increase or decrease the company's operating income.
For this, we need to compute the contribution margin per unit. We know that the unit product cost of a trophy is $256. Adding the incremental cost of $285, the new unit cost would be $541. Now, the selling price for the special order is given as $344 per trophy. Therefore, the contribution margin per unit would be $344 - $541 = -$197. This means that the company would incur a loss of $197 per unit if they accept the special order. Now, let's calculate the total loss that the company would incur if they accept the special order.Loss per unit = $197Total loss = $197 x 10 = $1,970.
Therefore, if the company accepts the special order, they would incur a loss of $1,970. Since the special order would have no effect on the company's regular sales, it would be better for the company to reject the special order and continue with their regular operations. Therefore, the answer is "No, the special order should not be accepted at this price."
To learn more about trophy :
https://brainly.com/question/22529696
#SPJ11
A firm has a net income of $25.1 million. It pays out $9.2 million in dividends, resulting in retained earnings of $48.9 million in an owners equity balance of $176.6 million. What is this firm's sustainable growth rate given this information
The firm's sustainable growth rate, based on the given information, is 14.28%.
To calculate the sustainable growth rate, we use the formula (Net Income / Owners' Equity) * (1 - Dividend Payout Ratio). In this case, the net income is $25.1 million, the owners' equity is $176.6 million, and the dividend payout is $9.2 million.
Substituting these values into the formula, we get ($25.1 million / $176.6 million) * (1 - $9.2 million / $25.1 million) = 0.1428 or 14.28%.
This means that the firm's sustainable growth rate is 14.28%. This indicates the maximum rate at which the firm can grow its assets and sales without relying on external financing. It takes into account the retained earnings, net income, and dividend payout ratio.
A sustainable growth rate of 14.28% suggests that the firm is capable of generating internal funds to support its growth and maintain a healthy balance between retained earnings and dividend distributions. However, it's important to consider other factors such as market conditions, industry trends, and strategic decisions to assess the overall growth potential of the firm.
To know more about sustainable growth rate, visit:
https://brainly.com/question/28400658
#SPJ11
You are considering going to graduate school for a one-year master's program. You have done some research and believe that the master's degree will add $5,000 per year to your salary for the next 10 years of your working life, starting at the end of this year. From then on, after the next 10 years, it makes no difference.
Completing the master's program will cost you $35,000, which you would have to borrow at an interest rate of 6%.
How would you decide if this investment in your education profitable?
To determine if the investment in your education is profitable, we need to compare the benefits and costs associated with pursuing the master's program.
Benefits:
The benefit of pursuing the master's program is the additional salary it is expected to generate over the next 10 years. According to your research, the master's degree will add $5,000 per year to your salary, starting at the end of this year. Therefore, the total benefit over the 10-year period would be $5,000 per year multiplied by 10 years, which equals $50,000.
Costs:
The cost of the master's program is $35,000, which you would need to borrow at an interest rate of 6%. This means you will have to repay the loan with interest. Using a loan repayment calculator, you can estimate the monthly loan payments over the repayment period.
To determine if the investment is profitable, we compare the benefits and costs. In this case, the total benefit of $50,000 exceeds the cost of $35,000. However, it's important to consider the time value of money and the interest payments on the loan. You should calculate the present value of the future benefits and compare it to the present value of the costs to account for the time value of money and interest payments.
If the present value of the future benefits exceeds the present value of the costs, then the investment in your education can be considered profitable. However, if the present value of the costs exceeds the present value of the benefits, it may not be a financially wise decision.
It's also important to consider non-financial factors such as personal and career growth, job opportunities, and long-term career prospects associated with obtaining a master's degree.
Learn more about financial analysis and present value calculations to make a more informed decision about the profitability of your education investment here:
brainly.com/question/23612833
#SPJ11
Classes affect the source of a transaction
You can assign multiple classes to a transaction ****
Classes can be renamed "divisions," "departments," etc., to suit different companies
Columns in a Balance Sheet by Class will always balance
The unspecified column on a profit and Loss by Class represents transactions that have not had a class specified
Classes are used in QuickBooks to track transactions and generate reports for specific segments of a business. The source of a transaction can be affected by classes, which is one of the advantages of using classes in QuickBooks.
You can assign multiple classes to a transaction, which allows you to track the transaction across different departments or segments of your business.Classes in QuickBooks can be renamed to suit different companies. They can be referred to as "divisions," "departments," or any other term that makes sense for your business. The purpose of classes is to help you organize your transactions by department or other categories that are important to your business.QuickBooks allows you to generate reports that show columns by class, including a Balance Sheet by Class. These reports will always balance, which makes it easy to track your finances and make informed decisions based on the data. The unspecified column on a Profit and Loss by Class represents transactions that have not had a class specified. This column helps you identify transactions that may need to be reviewed or classified correctly to get an accurate picture of your business finances.
to know more about QuickBooks intake pls visit:
https://brainly.com/question/30999359
#SPJ11
Elton, Inc., expects to sell 6.000 ceramic vases for $20 each. Direct materials costs are $2, direct manufa and manufacturing overhead is $3 per vase. The following inventory levels apply to 2021: Direct materials: Beginning inventory 1.000 units. Ending inventory 1.000 units. Finished goods inventory: Beginning inventory 400 units. Ending inventory 500 units. On the 2021 budgeted income statement, what amount will be reported for cost of goods sold? Select one: a. $91.500 b. $105,000 c. $90,000✔ d $88.500 The correct answer is: $90.000
The correct amount reported for cost of goods sold on the 2021 budgeted income statement is $30,500, which is not one of the s provided.
to calculate the cost of goods sold (cogs) for the 2021 budgeted income statement, we need to consider the direct materials, direct manufacturing labor, and manufacturing overhead costs associated with the ceramic vases.
given:- number of ceramic vases expected to be sold: 6,000
- selling price per vase: $20- direct materials cost per vase: $2
- direct manufacturing labor cost per vase: $3
first, let's calculate the total cost of the ceramic vases:total cost per vase = direct materials cost per vase + direct manufacturing labor cost per vase + manufacturing overhead cost per vase
= $2 + $3 = $5
next, we can calculate the cost of goods sold (cogs):
cogs = number of ceramic vases sold * total cost per vase = 6,000 * $5
= $30,000
however, we also need to consider the changes in inventory levels for direct materials and finished goods. the change in inventory affects the calculation of cogs.
change in direct materials inventory = ending inventory - beginning inventory = 1,000 - 1,000
= 0
change in finished goods inventory = ending inventory - beginning inventory = 500 - 400
= 100
adjusted cogs = cogs + change in direct materials inventory + change in finished goods inventory = $30,000 + 0 + 100 * $5
= $30,000 + $500 = $30,500 please double-check the provided answer choices, as the calculated value is different from the s given.
Learn more about Income here:
https://brainly.com/question/14732695
#SPJ11
With the help of example, compare and contrast the method of
measuring
opportunity costs differs for various kinds of inputs used by
businesses.
Businesses utilize two kinds of inputs or resources
Businesses utilize two kinds of inputs or resources: labor and capital. The correct answer is labour and capital.
The method of measuring the opportunity cost for these inputs differs considerably. For example, let's compare the opportunity cost of using a worker in the food industry versus the opportunity cost of using a machine in the manufacturing sector. Suppose a pizza restaurant owner must decide whether to hire a full-time cook or purchase a pizza-making machine. He may choose to employ a cook, but what are the potential costs? It might be that the owner is unable to make his deliveries promptly, resulting in a loss of customers. It may be that the cook requires benefits or a wage that is higher than the restaurant can afford, resulting in financial loss. Alternatively, the machine may be quicker, more efficient, and less expensive, with the added benefit of being available 24 hours a day. The opportunity cost, in this case, is the revenue that the business will lose if it does not choose the most effective choice. Conversely, the opportunity cost of selecting the incorrect alternative is the cost of the lost profit.
know more about opportunity cost
https://brainly.com/question/13036997
#SPJ11
In class, we discussed the use of statistical control procedures in quality management. complete this sentence to make a true statement about quality management statistical control procedures. Statistical control procedures in quality management____
a. Measure of cost of defects
b. Are concerned with monitoring quality after a product or service has been produced
c. Measure the cost of quality
d. Are concerned with monitoring quality before a product or service has been produced
e. Are concerned with monitoring quality while a product or service is being produced.
The primary goal of statistical control procedures is to ensure that the process in question produces consistent, high-quality output by reducing or eliminating variability from the system.
The true statement about quality management statistical control procedures is that they are concerned with monitoring quality while a product or service is being produced. Explanation: Statistical control procedures in quality management are concerned with monitoring quality while a product or service is being produced. The primary goal of statistical control procedures is to ensure that the process in question produces consistent, high-quality output by reducing or eliminating variability from the system.
To know more about variability visit:
https://brainly.com/question/15078630
#SPJ11
McDonalds across the campus would like to determine the proportion of customers who ordered newly introduced McBarbeque from their menu. In a random sample of 178 customers, 65 customers did not order McBarbeque. Construct a confidence interval estimate for population proportion at 95 percent level of confidence for the proportion of customers who ordered McBarbeque. [
Answer:
To construct a confidence interval estimate for the population proportion at a 95% level of confidence, we can use the formula:
Confidence Interval = Sample Proportion Margin of Error
Explanation:
where the sample proportion is calculated as the number of customers who ordered McBarbeque divided by the total sample size, and the margin of error accounts for the variability in the estimate.
Given:
Sample size (n) = 178
Number of customers who did not order McBarbeque (x) = 65
Calculate the sample proportion:
= (178 - 65) / 178
= 113 / 178
≈ 0.6348
Calculate the standard error:
SE = sqrt((0.6348(1-0.6348)) / 178)
SE ≈ 0.0404
Calculate the margin of error:
The margin of Error = Z * SE
where Z is the critical value associated with the desired confidence level. For a 95% confidence level, Z ≈ 1.96 (from the standard normal distribution).
Margin of Error = 1.96 * 0.0404
The margin of Error ≈ 0.0794
Construct the confidence interval:
Confidence Interval = Margin of Error
Confidence Interval = 0.6348 0.0794
Therefore, the confidence interval estimate for the population proportion of customers who ordered McBarbeque at a 95% level of confidence is approximate:
0.5554 to 0.7142
This means we can be 95% confident that the true proportion of customers who ordered McBarbeque lies within this interval.
Learn more about Confidence intervals here:
brainly.com/question/32583460
#SPJ11
the u.s. dollar suddenly changes in value against the euro moving from an exchange rate of 0.8909/€ to $0.8709/€. thus, the dollar has _________ by __________
The given exchange rate is 0.8909/€. After the change, it becomes $0.8709/€. Thus, the dollar has depreciated by 2.24%.
The given exchange rates are: 0.8909/€$0.8709/€. Therefore, the dollar has depreciated by (0.8909 - 0.8709)/0.8909 = 0.0224 or 2.24%.
An exchange rate refers to the value at which one currency can be exchanged for another currency. It represents the rate at which one country's currency is traded or converted into another country's currency.
The percentage decrease is calculated by using the formula:
% decrease = [(initial value - final value)/initial value] × 100%. Here, the initial value is 0.8909/€, and the final value is $0.8709/€.
Therefore, % decrease = [(0.8909 - 0.8709)/0.8909] × 100% = 2.24%.
Thus, the dollar has depreciated by 2.24%.
To know more about exchange rate, visit:
https://brainly.com/question/30461560
#SPJ11
Consumers in the two countries have identical and homogeneous preferences, which are given by: U(X,Y)= XY¹-8 с C = where the subscript c denotes consumption of goods. Assume d represent the share of good X in total expenditure in each country. 0.5, and it 1. The total income of the consumer in country j is w;I +r,K³. Write down the consumer's budget constraint 2. Derive the FOC for optimal choice consumption by maximizing the utility subject to the budget constraint in (1c) (Hint: set up Lagrangian optimization problem)
(w₁X + w₂Y - I) represents the budget constraint. By solving the Lagrangian optimization problem, we can find the optimal values of X and Y that maximize the consumer's utility while satisfying the budget constraint.
The consumer's budget constraint can be derived from the total income and the share of expenditure on good X. The FOC (First-Order Condition) for optimal consumption choice can be obtained by setting up a Lagrangian optimization problem.
1. The consumer's budget constraint can be written as follows:
For country 1: w₁X₁ + w₂Y₁ = I₁
For country 2: w₁X₂ + w₂Y₂ = I₂
Here, w₁ and w₂ represent the prices of goods X and Y, respectively, while I₁ and I₂ represent the total income of the consumer in each country.
2. To derive the FOC for optimal consumption choice, we need to set up a Lagrangian optimization problem. The Lagrangian function can be defined as follows:
L(X,Y,λ) = XY¹-8 + λ(w₁X + w₂Y - I)
Here, λ is the Lagrange multiplier, and (w₁X + w₂Y - I) represents the budget constraint.
To find the optimal consumption choice, we differentiate the Lagrangian function with respect to X, Y, and λ, and set the derivatives equal to zero: ∂L/∂X = Y¹-8 + λw₁ = 0
∂L/∂Y = X - 8Y¹-7 + λw₂ = 0
∂L/∂λ = w₁X + w₂Y - I = 0
Solving these equations simultaneously will give us the FOC for optimal consumption choice, which represents the condition for utility maximization subject to the budget constraint.
By solving the Lagrangian optimization problem, we can find the optimal values of X and Y that maximize the consumer's utility while satisfying the budget constraint.
These FOCs provide the necessary conditions for determining the optimal consumption bundle given the consumer's preferences and income.
Learn more about utility here :
https://brainly.com/question/29435194
#SPJ11
J had the following transactions: 6/1/20 Sold ABC stock for $2,700 with a $200 sales expense. The stock was purchased 2/1/20 for $3,000. 6/1/20 Sold FGH stock for $8,150 with a $150 sales expense. The stock was purchased 1/1/16 for $5,000. 6/1/20 Sold YED stock for $3,600 with no expenses. The stock was purchased 12/1/17 for $15,000. 6/1/20 Sold SWQ stock for $4,300 with no expenses. The stock was purchased 3/1/20 for $3,700.
J incurred a loss of $500 on the sale of ABC stock, a gain of $3,000 on the sale of FGH stock, a loss of $11,400 on the sale of YED stock, and a gain of $600 on the sale of SWQ stock.
For the sale of ABC stock, the proceeds are $2,700, and the sales expense is $200. The cost of the stock was $3,000. To calculate the gain or loss, we subtract the cost from the proceeds and subtract the sales expense:
Gain/Loss on ABC stock = Proceeds - Cost - Sales Expense
= $2,700 - $3,000 - $200
= -$500 (Loss)
For the sale of FGH stock, the proceeds are $8,150, and the sales expense is $150. The cost of the stock was $5,000. The gain or loss is calculated similarly:
Gain/Loss on FGH stock = Proceeds - Cost - Sales Expense
= $8,150 - $5,000 - $150
= $3,000 (Gain)
For the sale of YED stock, the proceeds are $3,600, and there are no sales expenses. The cost of the stock was $15,000. Calculating the gain or loss:
Gain/Loss on YED stock = Proceeds - Cost
= $3,600 - $15,000
= -$11,400 (Loss)
For the sale of SWQ stock, the proceeds are $4,300, and there are no sales expenses. The cost of the stock was $3,700. Calculating the gain or loss:
Gain/Loss on SWQ stock = Proceeds - Cost
= $4,300 - $3,700
= $600 (Gain)
For more information on Gain/Loss visit: brainly.com/question/29774020
#SPJ11
Intel has $4,273 (million) worth of inventory and their COGS are $12,010 (million). Their average holding cost per unit per year is $114.34. What is the average inventory cost per unit for Intel? Inst
The average inventory cost per unit for Intel is $114.43 per unit.
The average inventory cost per unit for Intel can be found out by dividing the total inventory value by the total units of inventory. Therefore, the average inventory cost per unit can be calculated as follows:
A. Average inventory cost per unit for Intel
We can calculate the total number of units of inventory that Intel has by dividing its total inventory value by the average holding cost per unit per year.
Inventory value = $4,273 million
Average holding cost per unit per year = $114.34
Total number of units of inventory = $4,273 million / $114.34 per unit = 37,341,212 units
Now, we can find out the average inventory cost per unit for Intel by dividing the total inventory value by the total units of inventory.
Average inventory cost per unit = Total inventory value / Total units of inventory
Total inventory value = $4,273 million
Average inventory cost per unit = $4,273 million / 37,341,212 units= $114.43
Therefore, the average inventory cost per unit for Intel is $114.43 per unit.
To know more about inventory visit:
https://brainly.com/question/31146932
#SPJ11
An important objective of organizational behaviour is to help people to:
a influence organizational events.
b understand, predict, and influence organizational events.
c predict organizational events
d understand why organizational events occur.
e understand and predict, but not influence organizational events
An important objective of organizational behavior is to help people understand, predict, and influence organizational events.
Organizational behavior is a field of study that examines how people behave within organizations. It deals with the way people act and behave in a workplace and the way they interact with each other.Organizational behavior is important because it helps organizations to identify factors that influence behavior and develop strategies to improve their performance.
By studying organizational behavior, we can understand how to communicate more effectively, motivate employees, and develop strong leaders. It also helps to create a positive organizational culture and maintain it.Therefore, the answer to the question is b) understand, predict, and influence organizational events.
To learn more about organization:
https://brainly.com/question/12825206
#SPJ11
Discuss four flaws in GDP as a measure of standard of
living.
While GDP is a widely used measure to gauge the economic performance of a country, it has several flaws when it comes to capturing the standard of living. Four flaws in GDP as a measure of standard of living:
Excludes non-market activities: GDP primarily focuses on market-based economic activities and excludes non-market activities such as household production, voluntary work, and informal sector transactions. This exclusion fails to capture the full extent of economic contributions and well-being in society.
Ignores income distribution: GDP measures the total value of goods and services produced in an economy but does not account for how that income is distributed among the population. It is possible to have a high GDP per capita but significant income inequality, leading to disparities in living standards and well-being.
Neglects environmental costs: GDP does not take into account the environmental costs associated with economic production and consumption. It fails to consider the depletion of natural resources, pollution, and environmental degradation, which can have long-term negative impacts on the well-being of current and future generations.
Overemphasis on economic output: GDP places a heavy emphasis on economic output and growth as the primary indicators of a country's standard of living. However, it does not consider other important aspects of well-being such as health, education, social inclusion, quality of life, and subjective measures of happiness. These factors are crucial in assessing the overall standard of living in a society.
Its exclusion of non-market activities, disregard for income distribution, neglect of environmental costs, and overemphasis on economic output limit its effectiveness in providing a comprehensive assessment of the well-being and quality of life in a society. It is important to complement GDP with other indicators and measures that take into account a broader range of factors to obtain a more holistic understanding of living standards.
To know more about household production, visit
https://brainly.com/question/22097439
#SPJ11
Statement of Financial Position as at 31 December 2017 Promise Serry Amaring Non-Current Amets Pland Machinery 4245 Trade Receivables 50 120 20 710 685 1200 2335 1440 Share Capital-RMI Shoes 2000 RE 1460 3460 500 100 Car Lib Trade Proble 300 1240 350 300 Total Equity and Liabi200 2335 140 Additional Information: 1. Prominent Co acquired 600,000 ordinary shares in Sorry Co. on 1 January 2013 for RM1,000,000 when the retained profit of Sorry Co. was RM200,000. 2. At the date of acquisition of Sorry Co, the fair value of its freehold property was considered to be RM400, 000 greater than its value in Sorry Co's Statement of Financial Position. Sorry Co. had acquired the property in January 2013 and 50% of the value building had depreciated on cost over 50 years. 3. Prominent Co, acquired 225,000 ordinary shares in Amazing Co on 1 January 2016 for RM500,000 when the retained earnings of Amazing Co were RM150,000. 4. The goodwill in P Co is impaired by RM92,000. 5. Non-Controlling interest was valued at full fair value. Sorry Co. shares were trading at RM1.60 prior to the acquisition by Prominent Co. Required: Prepare a Consolidated Statement of Financial Position as at 31 December 2017. (Show the working) (20 Marks)
Consolidated Statement of Financial Position as at 31 December 2017 Capital - RMI Shoes 2,000 Retained Earnings 2,302 Capital Reserve 3,460 Non-Controlling Interest - Sorry Co.500
Interest - Amazing Co. 100
Liabilities RM Share Capital - RMI Shoes 2,000
Retained Earnings 1,460
Capital Reserve 3460
Non-Controlling Interest - Sorry Co. 500
Non-Controlling Interest - Amazing Co. 100
Trade Payables 300
Car Loan 1240
Problems 350
Total Equity and Liabilities 7,410
Fixed Assets RM Freehold Property 2,775
Plant and Machinery 4,2458,020
Current Assets RM Temporary Investments 200
Trade Receivables 1,200
Cash in hand and at bank 9902,390
Total Assets 10,410
Additional Information:
1. Prominent Co acquired 600,000 ordinary shares in Sorry Co. on 1 January 2013 for RM1,000,000 when the retained profit of Sorry Co. was RM200,000.
This acquisition would require the recognition of goodwill of RM 800,000, calculated as follows:
Consideration (RM 1.60 x 600,000 ordinary shares) 960,000
Share Capital- RMI Shoes 2,000
Total Equity of Sorry Co. 200,000
Fair value of identifiable assets acquired 158,000
Goodwill 800,000(RM 960,000 - RM 2,000 - RM 200,000 - RM 158,000)
The goodwill should be carried forward and impaired in later years according to the requirements of the FRS 136.
2. At the date of acquisition of Sorry Co, the fair value of its freehold property was considered to be RM400, 000 greater than its value in Sorry Co's Statement of Financial Position.
Sorry Co. had acquired the property in January 2013 and 50% of the value building had depreciated on cost over 50 years. The adjustment for this is as follows:
Freehold property Increase in the value of freehold property400,000Depreciation for 4 years Cost (RM 2,000,000 / 50)40,000
Accumulated Depreciation (20,000)(RM 20,000 x 4 years)
Net Book Value 420,000
3. Prominent Co, acquired 225,000 ordinary shares in Amazing Co on 1 January 2016 for RM500,000 when the retained earnings of Amazing Co were RM150,000.
This acquisition would require the recognition of goodwill of RM200,000, calculated as follows:
Consideration 500,000
Share Capital-Amazing Co. 150,000
Total Equity of Amazing Co. 150,000
Goodwill200,000 (RM 500,000 - RM 150,000 - RM 150,000)
The goodwill should be carried forward and impaired in later years according to the requirements of the FRS 136.
4. The goodwill in P Co is impaired by RM92,000.The impairment of goodwill should be allocated between the non-controlling interests and the shareholders of Prominent Co. as per their ownership percentage.
5. Non-Controlling interest was valued at full fair value. Sorry Co. shares were trading at RM1.60 prior to the acquisition by Prominent Co.
Working: CIA Worksheet Share Capital Retained Earnings Capital Reserve Non-Controlling Interest - Sorry Co. Non-Controlling Interest - Amazing Co.
Total Equity Share Capital – RMI Shoes2,0002,000Retained Earnings1,460(158)2,3021,460
Capital Reserve 3,4603,460 Non-Controlling Interest - Sorry Co.500500Non-Controlling Interest - Amazing Co.100100
Total7,4102,460(158)3,46050010011,372
Trade Payables 300
Car Loan1 240
Problems 350
Total Equity and Liabilities 11,372
Fixed Assets RM Freehold Property 4,195
Plant and Machinery 4,2458,440
Current Assets RM Temporary Investments 200
Trade Receivables 1,200
Cash in hand and at bank 1,5302,930
Total Assets 11,372
To learn more on Accumulated Depreciation :
https://brainly.com/question/1287985
#SPJ11
Managing inflation expectations is the core objective of central banks.Explain how central banks in any relevant Pacific economy ensures low inflation.Justify why inflation is high and volatile in this country?
Central banks in Pacific economies aim to manage inflation expectations as their core objective. They ensure low inflation through various measures such as monetary policy, interest rate adjustments, and regulatory actions.
Central banks in Pacific economies play a crucial role in managing inflation expectations to maintain price stability and promote sustainable economic growth. They implement measures to ensure low inflation by using monetary policy tools and taking regulatory actions.
One of the primary tools central banks use is monetary policy, which involves adjusting key interest rates to influence borrowing costs and control the money supply. By raising interest rates, central banks aim to reduce consumer spending and borrowing, thereby curbing inflationary pressures. Conversely, when inflation is low or there are economic growth concerns, central banks may lower interest rates to stimulate borrowing and spending, boosting economic activity.
To learn more about Inflation -brainly.com/question/15764055
#SPJ11
