Answer:
Explanait it is not d
which is the best reason given to explain why metals make good electrical conductors?
Answer: Metals are an excellent conductor of electricity and heat because the atoms in the metals form a matrix through which outer electrons can move freely.
Explanation:
What is the formula for this compound?
1 atom of copper, 1 atom of sulfur, 4 atoms of oxygen
Answer:
The third one: [tex]CuSO_4[/tex]
Explanation:
Again you are going to want to look at a periodic table so you can determine the symbol of each atom.
The symbol for copper is Cu, the symbol for sulfur is S and the symbol for Oxygen.
There is 1 atom of copper in the compound
So we have Cu
There is 1 atom of sulfur in the compound
So we would have CuS
There are 4 atoms of oxygen in the compound
So we would have [tex]CuSO_4[/tex]
Note that the little number at the bottom left after each symbol indicates how many atoms of that element are in that compound.
What happens during
conduction?
A. The warmer object's particles slows
down the cooler object's particles.
B. The warmer object's particles stops the
cooler object's particles.
C. The warmer object's particles speed up
the cooler object's particles.
Answer: the answer is C. The warmer object's particles speed up
the cooler object's particles.
Explanation: Conduction occurs when a substance is heated, particles will gain more energy, and vibrate more. These molecules then bump into nearby particles and transfer some of their energy to them. This then continues and passes the energy from the hot end down to the colder end of the substance.
In order for a chemical reaction to take place, a certain amount of _____ must be present.
Answer:
The answer is energy. Please give me Brainliest!
Explanation:
Raising the concentrations of reactants makes the reaction happen at a faster rate. For a chemical reaction to occur, there must be a certain number of molecules with energies equal to or greater than the activation energy.
What is the atomic mass, in amu, of this atom?
Answer:
1) H - hydrogen - 1.100797
2) HE - helium - 4.00260
3) LI - lithum -6.941
Explanation:
On the periodic table the mass of carbon is reported as 12.01 amu. This is the average atomic mass of carbon. No single carbon atom has a mass of 12.01 amu, but in a handful of C atoms the average mass of the carbon atoms is 12.01 amu.
Can someone help me with this please
That is an ionic bond.
Explanation:
It has cations and anions
A gas occupies 900 mL at a temperature of 27 °C. What is the volume at
132 °C?
Answer:
4400 ml
Explanation:
At the end of seafloor spreading, where does the molten rock solidify?
Answer:
As the two plates move apart from each other, which often occurs at a rate of several centimetres per year, molten rock wells up from the underlying mantle into the gap between the diverging plates and solidifies into new oceanic crust. Spreading centres are found at the crests of oceanic ridges.
Explanation:
I found this answer by taking notes in class
Answer:
0k HI! so the answer is A
Explanation:
hope is helpful
Part 1: Name the type of chemical reaction that occurs when magnesium chloride
solution (MgCl2) reacts with sodium carbonate solution (Na2CO3).
Part 2: Explain why aluminum (AI) would react with copper chloride (CuCl2) but not with
magnesium chloride (MgCl2).
Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.
A chemical reaction is said to have occurred when new substances are formed. The reaction between magnesium chloride solution and sodium carbonate solution is a double decomposition reaction since the cations exchange anion partners in the product;
MgCl2(aq) + Na2CO3(aq) ------> MgCO3(s) + 2NaCl(aq)
We must note that a single replacement reaction depends on the relative positions of metals in the electrochemical series. Al can react with CuCl2 because Al is more reactive than copper and ahead of Cu in the electrochemical series. On the other hand, Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.
Lear more about electrochemical series: https://brainly.com/question/25749323
Why does Alex’s equation better represent the reaction?
Answer : it has been tested
Explanation:
i took the test
the bradford assay only works at low protein concentrations
Answer:
Dilute the sample
Explanation:
The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.
However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.
The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.
At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.
Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.
Learn more about proteins here:
https://brainly.com/question/30986280
#SPJ 6
pls answer this it's due today
Answer:
That's pretty easy,if you have a grasp of Elements, Compounds and their Symbols ans Molecular formula.
So, Let's get started!
Our reactions are as follows:
Sodium(Na) + Chlorine(Cl) ---> Sodium chloride(NaCl)Think of a compound that has both Sodium and Chlorine and is very common.
Common salt — Sodium chloride!
Yeah, that's it! It has both Sodium and Chlorine in it's molecular formula. (NaCl)
Magnesium(Mg) + Oxygen(O2) ---> Magnesium oxide(MgO)Now, we have to, somehow, get Magnesium oxide using Oxygen. The best way is: by reacting Magnesium with Oxygen.
Iron(Fe) + Sulfur(S) ---> Iron Sulfide(FeS)Now, we have to get two reactants that react to form Iron Sulfide.
FeS contains only two elements in its formula and that are: Iron(Fe) and Sulfur(S).
So, the best way would be to react Iron(Fe) and Sulfur(S) and get Iron Sulfide (FeS)
Hydrogen(H2) + Oxygen(O2) ---> water(H2O)You must know that water is H2O, that is, a compound of Hydrogen and Oxygen, the easiest way to get H2O as your product would be : by reacting Oxygen and Hydrogen.
Chlorine has 7 valence electrons. Describe the type of bond that sodium would have
with chlorine. Write the chemical formula of the compound these two elements would form together. (i figured it out nvm)
Choose all the answers that apply.
What’s is the freezing point of water?
1. 0’c
2.32’c
3.32’F
4.0’F
Answer: The answers are the first and third options.
Answer:
1.0'c
3.32'f
Explanation:
A student creates a hypothesis about their upcoming experiment. What must the
student do in their experiment with relationship to their hypothesis?
create a law based on the hypothesis
change the experiment to make the hypothesis correct
ignore the hypothesis
make observations to prove or disprove the hypothesis
Answer:
D. make observations to prove or disprove the hypothesis
Explanation:
which of the following molecular compounds does NOT need the usage of prefix for the first element
SO2
S2O3
N2S
N2S3
Answer:
SO2
Explanation:
that's my answer
Sana mKatolong
Which statement about states of matter is correct? (1 point)
O If you add enough heat to a gas, it will change into a liquid
If you cool a solid enough, it will change into a liquid
If you add enough heat to a solid it will change into a liquid.
o If you cool a liquid enough, it will change into a gas
Answer:
C
Explanation:
If you add enough heat to a solid it eventually becomes a liquid
Which one is the answer?
Answer:
I think 1, 4, and 5 are the answers to this question. I am not sure about 4 though.
Explanation:
You have to have a power source (1), you also have to have a way to get that power somewhere else (5), and the reason for 4 would be that the power has to come back through the power source to remain working.
Is sweat a chemical? I am curious to know! NO LINKS OR TROLLS
Answer:
no
Explanation:
stop troll hate
Which sentence best describes what happens during a change of state from a solid to a liquid?
A. The temperature stays the same and the particle speed increases
B. The temperature increases and the particle speed stays constant.
C. The temperature decreases and the particle speed decreases.
D. The temperature stays the same and the particle speed stays constant.
Answer:
The temperature stays the same and the particle speed stays constant
Will Mark Branliest!
How many grams are in 4.1 mole sample of CO?
A student dissolves ethanol (C2H5OH) in distilled water. In another container, he dissolves CaCl2, in distilled water. Will either of the solutions conduct electricity? If so which one?
Plz Help!
Answer: The CaCl2 solution will conduct electricity.
Answer:
i think that the CaCl2 solution will conduct electricity
Explanation:
im not sure but if im wrong im sorry
mass is the gravitational pull on the earth
-tru
-fals
plz help
Answer:
I believe the answer is false
Explanation:
Earth's gravity comes from all of its mass. All the mass makes a combined gravitational pull on all the mass in an object. If you were on a planet with less mass than Earth, you would weigh less than you do here. Mass is the quantity of matter in a physical body. It is also a measure of the body's inertia, the resistance to acceleration when a net force is applied. An object's mass also determines the strength of its gravitational attraction to other bodies. Mass is not the gravitational pull on the earth.
it was observed that magnesium sulphate was present in tap water ,which hardness might that be
Answer:
Calcium sulphate is the right answer for this question.
It is because calcium sulphate helps to obtain the hardness in water. hardness.
The presence of this resource is a main reason for permanent hardness.
Hard drinking water has moderate health benefits, but can pose serious problems for the industrial settings.
Explanation:
A compound has a molar mass of 163.59 g/mol. If you have 736.155 grams of this compound, how many moles do you have?
Answer:
4.50000 moles
Explanation:
This is dimensional analysis. If there is 163.59 grams in 1 mole of this compound then the converse is true: in 1 mole of this compound there is 163.59 grams --> 1 mol/163.59 grams.
Now that you have your conversion factor:
736.155 grams * (1 mol/163.59 grams) is your equation.
When you multiply these together, grams cancel and you end up with the desired mole-based answer:
4.50000 moles (The extra zeros are to make up for the 6 significant figures in 736.155, feel free to omit them if necessary.)
(pls give brainliest if this helped)
When 0.019 mol of aluminum sulfate are dissolved in enough water to make 905 milliliters of solution, what is the molar concentration of aluminum ions? Answer in units of M
Why do different places on Earth have different climates?
Your answer should include 1 paragraph to explain the claim, evidence, and reasoning. Be sure to check your grammar and spelling!
First, the amount of sunlight received at a given latitude is important. At the equator, the sun is high in the sky and thus very intense. As you move away from the equator, the sun does not reach as high of an angle in the sky, and is less intense. Another important effect near the poles is that during the summer, the sun is up all the time, which boosts the total amount of sunlight received in a day, while in contrast, during the winter, no sunlight is received at all.
There is another, more subtle effect that has to do with latitude. Nature likes to have the temperature be the same everywhere, much like ice cream melts at room temperature or a hot cup of coffee cools to room temperature. The equator is getting blasted with intense sunlight, while the poles are getting a lot less. Nature tries to resolve this imbalance and make the atmosphere the same temperature everywhere. The most efficient way to transfer heat towards the poles depends on latitude and the rotation of the Earth in a complex way. In the tropics (within 30 degrees latitude of the equator), the average daily temperature is mostly constant. Whether you move from north to south, say fro the equator to Mexico, the temperature is mostly the same. Compare that to the midlatitudes (30–60 degrees latitude), where the temperature changes rapidly as you move north or south to the poles. For example, the temperature in Texas is a lot hotter than the temperature in North Dakota.
Another factor is the composition of the surface. Different substances absorb, store, and re-emit heat with different levels of efficiency. The ocean is a major factor, which can either warm or cool the adjacent land. Other surface materials like rock, sand, vegetation, and ice also regulate temperature
The elevations of the surface, specifically mountains effect the climate. Usually, the taller the mountain, the colder the temperature is at the top. Mountains also cause air to flow in certain ways around them, which leads to wet areas on the upwind side and dry areas on the downwind side.
Which statement describes why sodium reacts more vigorously than magnesium to hydrochloric acid? Refer to the periodic table. Circle the letter of the correct answer.
1) Sodium has a smaller atomic radius than magnesium.
2)Sodium has a lower ionization energy than magnesium.
3)Magnesium has a lower ionization energy than sodium.
Answer:
Its B all the others arent true and also dont make any sense
Explanation:
Sodium has a lower ionization energy than magnesium describes why sodium reacts vigorously than magnesium chloride.
Why is sodium more reactive than magnesium?Sodium is more reactive than magnesium because it has the ability to easily lose electron, hence have lower ionization energy.Sodium belong to group one on the periodic table and they are called akali metal while magnesium belong to group two on the periodic table and they are called alkali Earth metal.Sodium and magnesium belong to the in the 3rd period. Iin the outermost energy level sodium has one electron but magnesium has 2 electrons. Therefore, there is more attraction abetween the nucleus and electrons in magnesium than that of sodium.Therefore, sodium is more reactive than magnesium chloride because of lower ionization energy.
For more details on sodium reactivity, check the link below.
https://brainly.com/question/6837593
The modern-day quantum model of the atom is better than John Dalton’s model because it
A. has set electron orbits.
B. has positive and negative particles in the nucleus.
C. can be represented in one dimension.
D. answers many questions about atoms.
Answer:
its D. answers many questions about atoms.
The modern-day quantum model of the atom is better than John Dalton’s model because it " answers many questions about atoms."
What is quantum model ?This concept also referred to as the quantum mechanical and wave mechanical model, would be the cornerstone of contemporary atomic theory. The fact that an electron inside an atom may only exist in a limited range of states or energy is analogous to a standing wave.
What is John Dalton’s model ?Dalton proposed that the concept of atoms will be used to explain the laws of conservation of mass as well as definite proportions. Imagining atoms as "solid, massy, hard, impenetrable, moving objects," he claimed that almost all matter would be composed of these tiny, indivisible particles.
Dalton also stated that almost no atom might be formed, converted into another, as well as destroyed. The complex shapes of orbitals also known as electron clouds used in the quantum mechanical atomic model are areas of space where an electron is likely to be present. So rather than being based on certainty, this model would be probability based.
Therefore, the correct answer will be option (D)
To know more about John Dalton’s model and quantum mechanical atomic model
https://brainly.com/question/12708372
#SPJ3
Question 12 of 35
Which two specialized structures allow amphibians to live on land?
O A. Gills
B. Lungs
C. Legs
D. Tail
SUBMIETI
Answer:
B and C
Explanation:
Most animals that live underwater have have gills and tails and vise versa hope this helps!
koukladina stop deleting my answers I'm trying to help people I'm not doing anything wrong stop it
