An AC power source has an rms voltage of 120 V and operates at a frequency of 60.0 Hz. If a purely inductive circuit is made from the power source and a 47.2 H inductor, determine the inductive reactance and the rms current through the inductor.

Answer:

a) the required angle in both radian and degree is  1.25 rad and 71.6°

b) the plane's angular speed relative to the earth is 3.86 × 10⁻⁵ rad/sec

Explanation:

Given the data in the question;

a)

we know that The expression for the angle subtended by an arc of circle at the center of the circle is,

θ = Length / radius

given that Length is 5000 miles and radius is 4000 miles

we substitute

θ = 5000 miles / 4000 miles

θ = 1.25 rad

Radian to Degree

θ = 1.25 rad × ( 180° / π rad )

θ =  71.6°

Therefore, required angle in both radian and degree is  1.25 rad and 71.6°

b)

The flight from Kampala to Singapore take 9 hours.

the plane's angular speed relative to the earth = ?

we know that, the relation between angular velocity and angular displacement is;

ω = θ / t

given that θ is 1.25 rads and time t is 9 hours or ( 9 × 3600 sec ) = 32400 sec

we substitute

ω = 1.25 rad / 32400 sec

ω = 3.86 × 10⁻⁵ rad/sec

Therefore, the plane's angular speed relative to the earth is 3.86 × 10⁻⁵ rad/sec

Answer:

The gravitational force Asteroid A experiences is greater than the gravitational force Asteroid C experiences

Full Question:

What is the temperature of a system in thermal equilibrium with another system made up of water and steam at one atmosphere of pressure?

A) 0°F

B) 273 K

C) 0 K

D) 100°C

E) 273°C

Answer:

The correction Option is D) 100°C

Explanation:

The temperature above is referred to as the critical point.

it is the highest temperature and pressure at which water (which has three phases - liquid, solid, and gas) can exist in vapor/liquid equilibrium. If the temperature goes higher than 100 degrees celsius, it cannot remain is liquid form regardless of what the pressure is at that point.

There is also a condition under which water can exist in its three forms: that is  

- Ice (solid)

- Liquid (fluid)

- Gas (vapor)

That state is called triple point. The conditions necessary for that to occur are:

Cheers

Cheers

Answer:

Explanation:

Answer:

The answer to this question is plasma

Answer:

Plasma

Explanation:

Answer:

 μ = 0.15

Explanation:

Let's start by using Hooke's law to find the force applied to the block

          F = k x

          F = 87.0 0.065

          F = 5.655 N

Now we use the translational equilibrium relation since the block has no acceleration

          ∑ F = 0

          F -fr = 0

          F = fr

the expression for the friction force is

          fr = μ N

if we write Newton's second law for the y-axis

          N -W = 0

          N = W = mg

we substitute

          F = μ mg

          μ = F / mg

          μ = [tex]\frac{5.655}{3.8 \ 9.8}[/tex]

          μ = 0.15

Answer:

Look at explanation

Explanation:

a) Kinetic Friction= μmg

μmg=0.53*88.9*9.8=461.75N

b)  -461.75N=ma

a= -5.19m/s^2

v=v0+at

5.19*1.7=v0

v0=8.81m/s^2

(a) The magnitude of the frictional force will be 461.75N

(b)The initial velocity will be 8.81 m/s.

A force that acts among sliding parts is referred to as kinetic friction. A body moving on the surface is subjected to a force that opposes its progressive motion

The size of the force will be determined by the kinetic friction coefficient between the two materials.

The given data in the problem is;

μ is the coefficient of kinetic friction= 0.53.

m is the mass = 88.9 kg

g is the acceleration due to gravity= 9.81 m/s²

v is the speed =?

The formula for friction force is;

[tex]\rm F= \mu R \\\\ R=mg \\\\ F= \mu mg \\\\\ F=0.53 \times 88.9 \times 9.81 \\\\ F= 461.75 \ N[/tex]

Mechanical force is found as;

F=ma

-461.75=(88.9)a

(-ve shows the -ve work done)

a=-5.19 m/s

From the Newton's first equation of motion;

v=u+at

0=u+at

u=-at

u=(- (-5.19)(1.7)

u=8.81 m/s²

To learn more about the kinetic friction refer to;

https://brainly.com/question/13754413

#SPJ2

Answer:

Because gas contains free molecules but not liquid.

Please mark as brainliast

Answer:

Normal force exerted on the rover would be greater at a point on the surface of the planet where the weight of the rover is experienced to be greater.

Explanation:

Since weight is a vector quantity, it can vary with position. Weight is the amount of force the planet exerts on the rover centered towards the planet.

Such a force is the result of gravitational pull and is quantified as:

[tex]F=G\times \frac{M.m}{R^2}[/tex]

and [tex]M=\rho\times \frac{4\pi.r^3}{3}[/tex]

where:

R = distance between the center of mass of the two bodies (here planet & rover)

G = universal gravitational constant

M = mass of the planet

m = mass of the rover

This gravitational pull varies from place to place on the planet because the planet may not be perfectly spherical so the distance R varies from place to place and also the density of the planet may not be uniform hence there is variation in weight.

Weight is basically a force that a mass on the surface of the planet experiences.

According to Newton's third law the there is an equal and opposite reaction force on the body (here rover) which is the normal force.

Answer:

a n c

Explanation:

Answer:

140m east

Explanation:

If East is positive then lets rephrase the problem into integers

A truck moves +70 m, then moves -120m, and finally moves +90m.

So totally Displacement = +70-120+90= +140m

Since east is positive, the trucks resultant displacement is 140 m east of origin

Answer:

Reverse Osmosis

Explanation:

Reverse osmosis is a type of filtration that involves passing a solvent through a semipermeable membrane in the opposite direction that natural osmosis does. Separation is always enforced through the use of pressure in this process. Ions, fine dust particles, molecules, and larger particles are typically removed from solvents using this method. The technique is particularly popular in the treatment and purification of water.

Answer:

filtration is used to separate

Answer:

17.07 kJ

Explanation:

The work done against gravity by the man W equals the potential energy change of the man and can of paint, ΔU

W = ΔU = mgΔy where m = mass of man and can of paint = 200 lb + 10 lb = 210 lb = 210 × 1 kg/2.205 lb, g = acceleration due to gravity = 9.8 m/s² and Δy = height of silo = 60 ft = 60 × 1m/3.28 ft

Since W = mgΔy, we substitute the values of the variables into the equation.

So,

W = mgΔy

W = 210 lb × 1 kg/2.205 lb × 9.8 m/s² × 60 ft × 1m/3.28 ft

W = 123480/7.2324 J

W = 17073.2 J

W = 17.0732 kJ

W ≅ 17.07 kJ

Answer:

have an increased resistance

Answer:

n.m maby

Explanation:

i think or its kg m/s

Answer:

answer (B) & (C)

Explanation:

kg • /N • s

Answer:

1. 588 N

2. 738 N

3. 588 N

Explanation:

time, t = 4 s

initial velocity, u = 0

final velocity, v = 10 m/s

mass, m= 60 kg

1.

Weight of passenger before starts

W =m g = 60 x 9.8 = 588 N

2.

When the elevator is speeding up

v = u + a t

10 = 0 + a x 4

a = 2.5 m/s2

Now the weight is

W' = m (a + g) = 60 (9.8 + 2.5) = 738 N

3.

When he reaches the cruising speed, the weight is

W = 588 N

Answer:

  r ’= 4 r

Explanation:

Electric potential energy is

          U = [tex]k \frac{q_1q_2}{r_{12}}[/tex]k q1q2 / r12

in this exercise

          q₁ = q₂ = q

          U = k q² / r

for when the charge change

           U ’= k q’² / r’

indicate that

      q ’= 2q

      U ’= U

we substitute

           U = k (2q) ² / r ’

           U = 4 k q² / r ’

we substitute

           [tex]k \ \frac{q^2}{r} = 4 k \ \frac{q^2}{r'}[/tex]k q² / r = 4 k q² / r ’

           r ’= 4 r

Answer:

The electromotive force is the maximum potential difference between the terminals of a battery.

The electromotive force is the maximum potential difference between the terminals of a battery.  The correct option is b.

The electromotive force also called as EMF, is the force which causes current to flow from  the positive to negative terminal of the battery.

The electromotive force is the maximum potential difference between the terminals of a battery.

Thus, the correct option is b.

Learn more about  electromotive force

https://brainly.com/question/13753346

#SPJ2

Answer:

1.61

Explanation:

According to Oxford dictionary, refractive index is, ''the ratio of the velocity of light in a vacuum to its velocity in a specified medium.''

If the clear transparent solid disappears when dipped into the liquid, it means that the index of refraction of the solid and liquid are equal.

Hence, when a transparent solid is immersed in a liquid having the same refractive index, there is no refraction at the boundary between the two media. As long as there is no refraction between the two media, the solid can not be seen because the solid and liquid will appear to the eye as one material.

Answer:

a) Δp = -2.0 kgm / s,  b)   Δp = -4 kg m / s

Explanation:

In this exercise the change in moment of a ball is asked in two different cases

a) clay ball, in this case the ball sticks to the door and we have an inelastic collision where the final velocity of the ball is zero

         Δp = p_f - p₀

         Δp = 0 - m v₀

         Δp = - 0.100 20

         Δp = -2.0 kgm / s

b) in this case we have a bouncing ball, this is an elastic collision, as the gate is fixed it can be considered an object of infinite mass, therefore the final speed of the ball has the same modulus of the initial velocity, but address would count

         v_f = - v₀

        Δp = p_f -p₀

        Δp = m v_f - m v₀

        Δp = m (v_f -v₀)

        Δp = 0.100 (-20 - 20)

        Δp = -4 kg m / s

Answer:

a) A = 1.50 m / s²,  B = 1.33 m/s³,  b) a = 12.1667 m / s²,

c)  I = M (1.5 t + 1.333 t²) ,  d)  ΔI = M 2.833   N

Explanation:

In this exercise give the expression for the speed of the rocket

         v (t) = A t + B t²

and the initial conditions

         a = 1.50 m / s² for t = 0 s

         v = 2.00 m / s for t = 1.00 s

a) it is asked to determine the constants.

Let's look for acceleration with its definition

         a = [tex]\frac{dv}{dt}[/tex]

         a = A + 2B t

we apply the first condition t = 0 s

         a = A

         A = 1.50 m / s²

we apply the second condition t = 1.00 s

          v = 1.5 1 + B 1²

          2 = 1.5 + B

          B = 2 / 1.5

          B = 1.33 m/s³

the equation remains

           v = 1.50 t + 1.333 t²

b) the acceleration for t = 4.00 s

           a = 1.50 + 1.333 2t

           a = 1.50 + 2.666 4

           a = 12.1667 m / s²

c) The thrust

           I = ∫ F dt = p_f - p₀

Newton's second law

          F = M a

          F = M (1.5 + 2 1.333 t) dt

we replace and integrate

         I = M ∫ (1.5 + 2.666 t) dt

         I = 1.5 t + 2.666 t²/2

         I = M (1.5 t + 1.333 t²) + cte

in general the initial rockets with velocity v = 0 for t = 0, where we can calculate the constant

         cte = 0

         I = M (1.5 t + 1.333 t²)

d) the initial push

For this we must assume some small time interval, for example between

t = 0 s and t = 1 s

        ΔI = I_f - I₀

        ΔI = M (1.5 1 + 1.333 1²)

        ΔI = M 2.833   N

Answer:

A point on the edge of the wheel will travel 199.563 radians at the given time.

Explanation:

Given;

initial angular velocity of the wheel; [tex]\omega _i = 245 \ rev/\min = 245\ \frac{rev}{\min} \times \frac{2\pi}{1\ rev} \times \frac{1 \ \min}{60 \ s} = 25.66 \ rad/s[/tex]

final angular velocity of the wheel;

[tex]\omega _f = 380 \ rev/\min = 380 \ \frac{rev}{\min} \times \frac{2\pi}{1\ rev} \times \frac{1 \ \min}{60 \ s} = 39.80 \ rad/s[/tex]

radius of the wheel, d/2 = (30 cm ) / 2 = 15 cm = 0.15 m

time of motion, t = 6.1 s

The angular distance traveled by the edge of the wheel is calculated as;

[tex]\theta = (\frac{\omega_f + \omega_i}{2} )t\\\\\theta = (\frac{39.8 + 25.66}{2} )\times 6.1\\\\\theta = 199.653 \ radian[/tex]

Therefore, a point on the edge of the wheel will travel 199.563 radians at the given time.

Answer:

Explanation:

a )

Magnetic field inside solenoid B = μ₀ NI ,

μ₀ = 4π x 10⁻⁷ ; N is no of turns per meter length in solenoid and I is current B=  4π x 10⁻⁷ x 30 x 10² x 15

= .0565 T .

Force on each side of square loop = B i L

B is external magnetic field , i is current in loop and L is length of side

Force on each side of square loop = .0565 x .24 x 2 x 10⁻²

= 2.7 x 10⁻⁴ N .

b )

Torque on the loop =  F x d

F is force on one side , d is distance between two sides , that is side of the square loop

= 2.7 x 10⁻⁴ x 2 x 10⁻² N.m

= 5.4  x 10⁻⁶ N.m .

Answer:

T1 = 499.9N, T2 = 865.8N, T3 = 1000N

Explanation:

To find the tensions we need to find the vertical and horizontal components of T1 and T2

T1x = T1 cos60⁰, T1y = T1 sin60⁰

Also, T2x = T2 cos30⁰, T2y = T2 sin30⁰

For the forces to be in equilibrium,

the sum of vertical forces must be zero and the sum of horizontal forces must also be zero

Sum of Fx = 0

That is, T1x - T2x=0

NB: T2x is being subtracted because T1x and T2x are in opposite directions

T1 cos60⁰ - T2 cos30⁰ = 0

0.866T1 - 0.5T2 = 0 ............ (1)

Sum of Fy = 0

T1y + T2y - 1000 = 0

T1 sin60⁰ + T2 sin30⁰ - 1000 = 0

NB: The weight of the bag of cement is also being subtracted because it's in an opposite direction.

0.5T1 - 0.866T2 - 1000 = 0 ........(2)

From (1)

make T1 the subject

T1 = 0.5T2/0.866

Substitute T1 into (2)

0.5 (0.5T2/0.866) - 0.866T2 = 1000

(0.25/0.866)T2 - 0.866T2 = 1000

0.289T2 - 0.866T2 = 1000

1.155T2 = 1000

T2 = 865.8N

Then T1 = 0.5 x 865.8 / 0.866

T1 = 499.9N

T3 = 1000N

NB: The weight of the bag is the Tension above the rope, which is T3

10N/m

Explanation:

f=kx

k=f/x

k=20N/0.2m

k=10N/m

Answer: [tex]2.4705\ kg.m^2[/tex]

Explanation:

Given

length of the rod is L=0.9 m

Mass of the rod m=3.8 kg

Point masses has mass of m=2.3 kg

Moment of Inertia of the rod about the center is

[tex]\Rightarrow I_o=\dfrac{1}{12}ML^2[/tex]

Moment of inertia of combined system is the sum of rod and two point masses.

[tex]\Rightarrow I=I_o+2mr^2[/tex]

[tex]\Rightarrow I=\dfrac{1}{12}3.8\times 0.9^2+2\times 2.3\times \left(\dfrac{0.9}{2}\right)^2\\\\\Rightarrow I=1.539+0.9315\\\Rightarrow I=2.4705\ kg-m^2[/tex]

when you change your motor on your vehicle you need to notify the DMV within 10 days

If you change the motor in your vehicle you need to notify the DMV within 10 days of this change.

An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.

Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power generation), heat energy (e.g. geothermal), chemical energy, electric potential, and nuclear energy (from nuclear fission or nuclear fusion). Many of these processes generate heat as an intermediate energy form, so heat engines have special importance. Some natural processes, such as atmospheric convection cells convert environmental heat into motion (e.g. in the form of rising air currents). Mechanical energy is of particular importance in transportation but also plays a role in many industrial processes such as cutting, grinding, crushing, and mixing.

Mechanical heat engines convert heat into work via various thermodynamic processes. The internal combustion engine is perhaps the most common example of a mechanical heat engine, in which heat from the combustion of fuel causes rapid pressurization of the gaseous combustion products in the combustion chamber, causing them to expand and drive a piston, which turns a crankshaft. Unlike internal combustion engines, a reaction engine (such as a jet engine) produces thrust by expelling reaction mass, by Newton's third law of motion.

Learn more about motor

https://brainly.com/question/8954449

#SPJ2

Answer:

parametric representation: x = u, y = v - u ,  z = - v

Explanation:

Given vectors :

i - j ,  j - k

represent the vector equation of the plane as:

r ( u, v ) = r₀ + ua + vb

where:  r₀ = position vector

            u and v = real numbers

             a and b = nonparallel vectors

expressing the nonparallel vectors as :

a = i -j , b = j - k , r = ( x,y,z ) and r₀ = ( x₀, y₀, z₀ )

hence we can express vector equation of the plane as

r(u,v) = ( x₀ + u, y₀ - u + v,  z₀ - v )

Finally the parametric representation of the surface through (0,0,0) i.e. origin = 0

( x, y , z ) = ( x₀ + u,  y₀ - u + v,   z₀ - v )

x = 0 + u ,

y = 0 - u + v

z = 0 - v

∴ parametric representation: x = u, y = v - u ,  z = - v

Answer:

Initially let n cannonballs with a total mass of m be to the left of the center of mass at L /2 and the mass of the car at L/2

x1 =  [-m / (m + M)] * L / 2   is the original position of the CM

x2 = (m (x + L/2) + M x) / (m + M) * L/2 final position of CM with all cannon balls to the right

[-m x - m L / 2 + m x - M x] / (M + m) * L/2

= - ( m L / 2 + M x) / (m + M) * L/2 = Xcm

Check the math, but maximum distance occurs when the cannonballs of mass m move from -L/2 to L/2 and the car of mass M moves from zero to -x

Answer:

stationary waves are transverse waves