An electric device uses 8.4 amps of current and operates from a 120-volt outlet. how much power does the device use? a. 1,008 watts b. 14 watts c. 0.07 watts
d. 1.08 watts

The range of possible speeds (a) when the car speedometer reads 80 km/h is from 76.8 km/h to 83.2 km/h. (b) The range of possible speeds in miles per hour is from 47.26 mi/h to 52.21 mi/h.

The 5% uncertainty in the car speedometer means that the actual speed could be 5% higher or lower than the displayed speed. To find the range of possible speeds, we can calculate 5% of 80 km/h and add/subtract it from the displayed speed.

First, calculate 5% of 80 km/h:

5% of 80 km/h = (5/100) * 80 km/h = 4 km/h

Next, subtract 4 km/h from 80 km/h to find the lowest possible speed:

80 km/h - 4 km/h = 76 km/h

Finally, add 4 km/h to 80 km/h to find the highest possible speed:

80 km/h + 4 km/h = 84 km/h

Therefore, the range of possible speeds when the car speedometer reads 80 km/h is from 76 km/h to 84 km/h.

To convert this range to miles per hour, we can use the conversion factor 1 km/h = 0.6214 mi/h.

Lowest speed in miles per hour:

76 km/h * 0.6214 mi/h = 47.26 mi/h (rounded to 2 decimal places)

Highest speed in miles per hour:

84 km/h * 0.6214 mi/h = 52.21 mi/h (rounded to 2 decimal places)

Therefore, the range of possible speeds in miles per hour is from 47.26 mi/h to 52.21 mi/h.

To know more about speedometer, refer here:

https://brainly.com/question/30454928#

#SPJ11

The wavelength of the electromagnetic wave with a frequency of 1.55 × 10¹² s⁻¹ is approximately 1.935 × 10⁻⁴ meters.

To calculate the wavelength of an electromagnetic wave, we can use the equation:

λ = c / f

Where:

λ is the wavelength of the wave

c is the speed of light (approximately 3.00 × 10⁸ m/s)

f is the frequency of the wave

Given that the frequency is 1.55 × 10¹² s⁻¹, we can substitute this value into the equation:

λ = (3.00 × 10⁸ m/s) / (1.55 × 10¹² s⁻¹)

λ = (3.00 × 10⁸ m/s) / (1.55 × 10¹² s⁻¹)

λ ≈ 1.935 × 10⁻⁴ m

Learn more about electromagnetic wave here:

https://brainly.com/question/29854466

#SPJ11

The wavelength (in meters) of an electromagnetic wave whose frequency is 1.55 × 10¹² Hz is 0.1935 meters.

An electromagnetic wave is a transverse wave that travels through space carrying energy. It is created by the movement of electric and magnetic fields in space, that is, the oscillation of the electric and magnetic fields. Electromagnetic waves are unique because they do not require a medium to travel through, which means they can travel through a vacuum, such as space.

The relationship between the frequency and wavelength of an electromagnetic wave is expressed mathematically using the formula:λ = c / f

Where:

λ = wavelength

c = speed of light = 3 × 10⁸ m/s

f = frequency

Substituting the values in the equation;λ = c / fλ = 3 × 10⁸ / (1.55 × 10¹²)λ = 0.1935 m

Therefore, the wavelength of an electromagnetic wave whose frequency is 1.55 × 10¹² Hz is 0.1935 meters.

An electromagnetic wave can be characterized by its frequency, wavelength, and speed. The frequency of an electromagnetic wave is the number of waves that pass through a point in one second, measured in hertz (Hz). The wavelength of an electromagnetic wave is the distance between two consecutive peaks or troughs of the wave, measured in meters (m).

The speed of light in a vacuum is constant and is equal to 3 × 10⁸ m/s. This means that the frequency and wavelength of an electromagnetic wave are inversely proportional to each other. If the frequency increases, the wavelength decreases, and vice versa. Therefore, we can use the relationship between frequency and wavelength to calculate the wavelength of an electromagnetic wave whose frequency is known.

Learn more about electromagnetic wave: https://brainly.com/question/29774932

#SPJ11

The magnitude of the magnetic field at the center of the coil with 120 circular loops, a radius of 0.80 m, and carrying a 6.0 A current is approximately 3.02 × 10⁻⁴ Tesla.

The magnitude of the magnetic field at the center of a coil carrying current can be determined using Ampere's law.

According to Ampere's law, the magnetic field (B) at the center of a coil with N circular loops and carrying current (I) can be calculated using the formula:

B = (μ₀ * N * I) / (2 * R)

Where:

B is the magnetic field at the center of the coil,

μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),

N is the number of circular loops in the coil,

I is the current flowing through the coil, and

R is the radius of the circular loops in the coil.

N = 120 circular loops

I = 6.0 A (current)

R = 0.80 m (radius)

Substituting these values into the formula, we can calculate the magnetic field (B):

B = (4π × 10⁻⁷ T·m/A) * (120 loops) * (6.0 A) / (2 * 0.80 m)

 = (4π ×10⁻⁷ T·m/A) * (120 * 6.0) / (2 * 0.80)

 = (4π × 10⁻⁷ T·m/A) * (720) / (1.60)

 = (9.6π × 10⁻⁵ T)

So, the magnitude of the magnetic field at the center of the coil is approximately 9.6π × 10⁻⁵ Tesla, or 3.02 × 10⁻⁴ Tesla.

The magnitude of the magnetic field at the center of the coil with 120 circular loops, a radius of 0.80 m, and carrying a 6.0 A current is approximately 3.02 × 10⁻⁴ Tesla.

To know more about magnetic  visit:

https://brainly.com/question/14411049

#SPJ11

The thermal stress set up in the rail when its temperature is raised to 40.0∘C can be calculated using the formula:
Thermal Stress = (Coefficient of Linear Expansion) * (Change in Temperature) * (Young's Modulus)

To calculate the thermal stress, we need to know the coefficient of linear expansion and Young's modulus of the steel rail. Let's assume the coefficient of linear expansion is α and Young's modulus is Y.
Given that the length of the rail is 30.000m and the temperature change is from 0.0∘C to 40.0∘C, the change in temperature is 40.0∘C - 0.0∘C = 40.0∘C.
Assuming we have the values for α and Y, we can substitute them into the formula to calculate the thermal stress.
Thermal Stress = α * (Change in Temperature) * Y
Please provide the values for the coefficient of linear expansion (α) and Young's modulus (Y) for the steel rail so that we can calculate the thermal stress accurately.

To know more about , thermal stress, click here https://brainly.com/question/13061569

#SPJ11

The river is flowing at a speed of 2 km/h. To determine the speed of the river flow, we can use the concept of relative velocity. The relative velocity of the boat with respect to the river will give us the speed at which the river is flowing.

Let's denote the speed of the boat in still water as "v" and the speed of the river flow as "r."

When the boat is traveling downstream (along with the river flow), the effective speed of the boat is increased by the speed of the river. Therefore, the speed of the boat downstream is given by:

v_downstream = v + r

Similarly, when the boat is traveling upstream (against the river flow), the effective speed of the boat is decreased by the speed of the river. Therefore, the speed of the boat upstream is given by:

v_upstream = v - r

We are given that it takes the boat 3.0 hours to travel 30 km downstream and 5.0 hours to return. Let's denote the distance traveled downstream as "d" and the distance traveled upstream as "u."

Distance downstream (d) = 30 km

Time downstream (t_downstream) = 3.0 hours

Using the formula for speed (speed = distance/time), we can express the speed downstream (v_downstream) as:

v_downstream = d / t_downstream

v + r = 30 km / 3.0 hours

v + r = 10 km/h

Similarly, for the upstream journey, we have:

Distance upstream (u) = 30 km

Time upstream (t_upstream) = 5.0 hours

v - r = 30 km / 5.0 hours

v - r = 6 km/h

Now, we have a system of two equations with two unknowns (v and r):

v + r = 10 km/h

v - r = 6 km/h

Adding these two equations, we eliminate "r":

2v = 16 km/h

v = 8 km/h

Now that we have the speed of the boat in still water (v), we can substitute it back into one of the equations to find the speed of the river flow (r). Let's use the first equation:

v + r = 10 km/h

8 km/h + r = 10 km/h

r = 2 km/h

Therefore, the speed of the river flow is 2 km/h.

To read more about relative velocity, visit:

https://brainly.com/question/17228388

#SPJ11

The average power input to the wheel during this time interval T is given by the expression: Iw_f^2/2T^2.The answer to the given problem is option C: `Iw_f^2/2T^2`.

Explanation: Given, Wheel with rotational inertia, I is mounted on a fixed, frictionless axle. Angular speed of the wheel is increased from zero to w_f in a time interval T.

Average power input to the wheel during the time interval T is to be determined. We know that the rotational kinetic energy of a rotating object is given by;KE = (1/2)Iω^2

Where,I = rotational inertiaω = angular speed of rotation of the object.To increase the angular speed of the wheel from zero to ω_f in a time T, a constant torque τ is applied to the wheel. Hence, we can write,τ = I(ω_f-0)/TAverage power output is given by;Pav = τω_f

Putting the value of τ, we get; Pav = (I(ω_f-0)/T) ω_fPav = (Iω_f^2)/TPav = (Iω_f^2)/(2T/2)Pav = Iω_f^2/2T^2

Hence, the average power input to the wheel during this time interval T is given by the expression: Iw_f^2/2T^2.

To learn more about inertia visit;

https://brainly.com/question/3268780

#SPJ11

The work done by the force when the object moves 1.6 m is approximately 7.12 Joules

(a) To calculate the work done by a force on an object, we can use the formula:

Work = Force * Distance * cos(theta),

where Work is the work done, Force is the magnitude of the force, Distance is the distance over which the force acts, and theta is the angle between the force and the direction of motion.

Force (F): 5.2 N

Angle (theta): 37 degrees

Distance (d): 1.6 m

We need to convert the angle from degrees to radians to use it in the cosine function:

theta_radians = 37 degrees * (pi / 180 degrees).

Substituting the values into the formula, we have:

Work = 5.2 N * 1.6 m * cos(37 degrees * (pi / 180 degrees)).

Evaluating the expression, we find:

Work ≈ 7.12 J.

Therefore, the work done by the force when the object moves 1.6 m is approximately 7.12 Joules.

To know more about force visit:

https://brainly.com/question/25239010

#SPJ11

The behavior of light that makes it possible to see a spectrum of colors in a spray of water on a sunny day is dispersion. it can be concluded that the behavior of light that makes it possible to see a spectrum of colors in a spray of water on a sunny day is dispersion.

Therefore, the correct option is "dispersion.

What is light?

Light is electromagnetic radiation that the human eye can see. It travels in a straight line and has both wave-like and particle-like characteristics. Different colors of light have different wavelengths, and visible light's wavelengths range from about 400 to 700 nanometers (nm).

What is dispersion?

When a beam of white light passes through a prism, the beam separates into its component colors. The separation of colors is due to the phenomenon of dispersion. The different colors of white light are refracted, or bent, to different degrees as they pass through the prism. Violet light has a shorter wavelength and is refracted more than red light, which has a longer wavelength.

Therefore, it can be concluded that the behavior of light that makes it possible to see a spectrum of colors in a spray of water on a sunny day is dispersion.

To learn more about dispersion, visit:

https://brainly.com/question/13265071

#SPJ11

The magnitude of the force that you exert on the cable is 21 N.

Given Data:Diameter of cylinder, D = 12 m

Mass of cylinder, m = 50 kg

Force applied on cable, F = 9 N

Acceleration of point on the cable, a = 0.60 m/s²

To find:Angular acceleration, αTorque exerted on cylinder, τMagnitude of force that you exert on cable, F'

Formula Used:α = a/rWhere, r is the radius of cylinderτ = Fr Where, F is the force exerted on cylinderr = D/2 = 6 m [Diameter of cylinder, D = 12 m]

Substituting the given values in above formula,α = a/r= 0.60/6= 0.10 rad/s²

Therefore, the magnitude of the angular acceleration of the cylinder is 0.10 rad/s².

Torque exerted on cylinder,τ = Fr= 9 × 6= 54 Nm

Therefore, the magnitude of the torque that the cable exerts on the cylinder is 54 Nm.

Magnitude of force that you exert on cable, F'

From the free body diagram, we can write the following equation of motion:F - F' = maWhere, F is the force applied on the cable by you.Substituting the given values in above equation,9 - F' = 50 × 0.60= 30F' = 9 - 30= -21 N

Therefore, the magnitude of the force that you exert on the cable is 21 N.

Learn more about magnitude

brainly.com/question/28714281

#SPJ11

An arrow is shot straight up in the air at an initial speed of 46.0 m/s after approximately 3.98 seconds, the arrow will be heading downward at a speed of 7.00 m/s.

To determine the time at which the arrow is heading downward at a speed of 7.00 m/s, we can use the kinematic equation:

v = u + at

Where:

v is the final velocity (7.00 m/s),

u is the initial velocity (46.0 m/s),

a is the acceleration (in this case, due to gravity and is approximately -9.8 [tex]m/s^2)[/tex],

and t is the time we want to find.

We can rearrange the equation to solve for time (t):

t = (v - u) / a

Plugging in the given values, we have:

t = (7.00 - 46.0) / -9.8

Calculating this, we find:

t ≈ (-39.0) / (-9.8)

t ≈ 3.98 seconds

For more such information on: speed

https://brainly.com/question/13943409

#SPJ8

The height of the cliff is approximately 35.23 meters. To determine the height of the cliff, we can use the kinematic equations of motion and break down the motion of the arrow into horizontal and vertical components.

First, let's calculate the vertical component of the arrow's initial velocity:

Vertical Velocity = Initial Velocity * sin(angle)

Vertical Velocity = 31.0 m/s * sin(64.0º)

Vertical Velocity ≈ 27.37 m/s

Time to Highest Point = Vertical Velocity / Acceleration due to Gravity

Time to Highest Point ≈ 27.37 m/s / 9.8 m/s²

Time to Highest Point ≈ 2.79 s

Time from Highest Point to Cliff = Total Time - Time to Highest Point

Time from Highest Point to Cliff = 4.10 s - 2.79 s

Time from Highest Point to Cliff ≈ 1.31 s

Vertical Distance = (Vertical Velocity * Time) + (0.5 * Acceleration due to Gravity * Time²)

Vertical Distance = (27.37 m/s * 1.31 s) + (0.5 * 9.8 m/s² * (1.31 s)²)

Vertical Distance ≈ 35.23 m

To know more about cliff refer here:

https://brainly.com/question/25700580#

#SPJ11

Therefore the maximum current in the circuit is 7.11A.

A series RL circuit includes a resistor and an inductor. The behavior of an RL circuit when a switch is closed can be determined by applying Kirchhoff's voltage law (KVL).

The voltage drops across the resistor and inductor must add up to the voltage source. The maximum current in the circuit can be calculated using Ohm's law and Kirchhoff's voltage law.

Kirchhoff's voltage law can be expressed as follows:

VL = VR + VL

Where VL is the voltage drop across the inductor, VR is the voltage drop across the resistor, and V is the voltage source.

Since the circuit is purely resistive and inductive, the voltage across the inductor and resistor can be calculated as follows:

VR = IRRL where IR is the current flowing through the resistor, and RL is the resistor's resistance.

VL = XL/dt where XL is the inductor's inductance and dt is the time difference between t = 0 and t = 0.3s.

When the switch is first closed, the current through the inductor is zero. At t = 0, the current starts to increase in the inductor until it reaches its maximum value at time t = infinity.

The maximum current in the circuit is found by calculating the steady-state current.

The steady-state current, IS can be calculated as follows:

IS = V/RL

where V is the voltage source.

The voltage source is given as 19.9V.

The resistance of the circuit, RL is given as 2.8 ohms.

Therefore,

IS = V/RL

= 19.9/2.8

= 7.11A

The maximum current in the circuit is 7.11A.

To know more about resistance visit:

https://brainly.com/question/14547003

#SPJ11

Your friend must be wrong because the time-dependence of acceleration is given by the derivative of velocity with respect to time, not the time itself. The equation a(t) = yt² + yt does not represent the correct relationship between acceleration and time.

Acceleration is defined as the rate of change of velocity with respect to time. In mathematical terms, it is the derivative of velocity with respect to time, denoted as a(t) = dV/dt. Therefore, the equation a(t) = yt² + yt provided by your friend does not represent the correct relationship between acceleration and time.

To determine the correct relationship, we need to integrate the equation for acceleration to obtain the velocity function. Given that a(t) = yt² + yt, integrating both sides with respect to time gives V(t) = (1/3)yt³ + (1/2)yt² + C, where C is the constant of integration. However, this equation represents the velocity as a function of time, not the acceleration.

Your friend's equation a(t) = yt² + yt for the time-dependence of acceleration is incorrect. Acceleration is the derivative of velocity with respect to time, not a function of time itself. The correct relationship can be obtained by integrating the acceleration equation, yielding the velocity as a function of time.

To know more about acceleration visit:

https://brainly.com/question/605631

#SPJ11

The voltage response on the capacitor to closing the switch is an immediate change to the supply voltage.

When a switch is closed in a circuit containing a capacitor, the capacitor responds by rapidly charging or discharging to the supply voltage. Initially, before the switch is closed, the capacitor is uncharged, and there is no voltage across it. As soon as the switch is closed, a current starts flowing through the circuit, causing the capacitor to charge or discharge.

If the capacitor is uncharged and the supply voltage is higher than zero, the capacitor acts as an open circuit until it reaches its fully charged state. In this case, the voltage across the capacitor gradually increases over time until it reaches the supply voltage.

This charging process follows an exponential curve, and the rate at which the voltage across the capacitor increases is determined by the RC time constant, where R is the resistance in the circuit and C is the capacitance of the capacitor.

On the other hand, if the capacitor is already charged and the supply voltage is suddenly reduced to zero (by opening the switch), the capacitor acts as a source of energy, discharging through the circuit. The voltage across the capacitor gradually decreases over time until it reaches zero, following the exponential discharge curve.

Learn more about voltage response

brainly.com/question/32189716

#SPJ11

Thus, the electric flux through the top surface of the cube is 2.48 × 10⁵ N.m²/C.

Given that:

A 29.0nC point charge is at the center of a 5.50 m ×5.50 m×5.50 m cube.

To find: Electric flux through the top surface of the cube

We know that Electric flux is given as:

ϕ = E.A

Where,ϕ = Electric flux

E = Electric field

A = Area of the surface

Let's consider the top surface of the cube

Electric field due to point charge is given as:

E = k * (q/r²)

Where,k = Coulomb's constant = 9 × 10^9 N.m²/C²

q = point charge = 29 × 10^-9 C (in C)

r = Distance between point charge and surface = 5.5/2 = 2.75m (in m)

Therefore,E = (9 × 10^9) * [(29 × 10^-9) / (2.75)²]E = 8.19 × 10^3 N/C

Now, the area of the surface is given as:

A = side² = 5.5² = 30.25 m²

Therefore,

Electric flux through the top surface of the cube is given as:

ϕ = E.Aϕ = 8.19 × 10³ × 30.25ϕ = 2.48 × 10⁵ N.m²/C

Thus, the electric flux through the top surface of the cube is 2.48 × 10⁵ N.m²/C.

To know more about  electric flux visit:

https://brainly.com/question/14544020

#SPJ11

Water is an essential natural resource for all living beings, which requires proper maintenance and enhancement. The seven processes used to improve the quality of water are as follows: Screening, Flocculation and sedimentation, Filtration, Disinfection, Reverse Osmosis, Ultraviolet Treatment, and Activated Carbon Treatment.

Water quality control is a method of assessing water quality, determining if it is safe for consumption or environmental reasons. The process of water quality control includes multiple processes like screening, flocculation and sedimentation, filtration, disinfection, reverse osmosis, ultraviolet treatment, and activated carbon treatment.

The screening process includes removing large debris from the water, such as rocks, sand, or garbage. Flocculation and sedimentation are done to separate water from the particles and improve the settling speed. The process of filtration includes water passing through a filter, either a physical or chemical filter, and separating impurities and other particles in water.

Disinfection is a process to remove all microorganisms that could lead to waterborne illnesses. Reverse osmosis, ultraviolet treatment, and activated carbon treatment are other processes used to remove or reduce the impurities and toxic elements present in the water.

The conclusion is that these seven processes are commonly used to improve water quality.

To know more about Activated Carbon Treatment visit:

brainly.com/question/29724447

#SPJ11

The energy delivered by a sound wave with an intensity level of 60 dB incident on a circle with a 0.3 cm diameter for 10 hours is 4.97×10⁻⁷ J.

The sound intensity (I) is the sound power (P) per unit area (A). It is given by the formula,`I=P/A`where `I` is in watts/m². We have to convert dB to watts/m² to use this formula.The formula for sound intensity level (L) in dB is`L=10log(I/I₀)`where `I₀` is the threshold of hearing = 1.0 × 10⁻¹² W/m².For `L=60 dB` we get,I = `I₀ 10^(L/10)`= 1.0 × 10⁻¹² × 10⁶ = 1.0 × 10⁻⁶ W/m².Area of the circle,`A= π r²`where `r = d/2` = 0.3/2 cm = 0.015 m.Area A = π (0.015 m)² = 7.07 × 10⁻⁴ m²The energy delivered E is given by the formula,`E = I × A × t`where `t = 10 hours` = 10 × 60 × 60 s = 36000 s.Substituting the values,`E = 1.0 × 10⁻⁶ × 7.07 × 10⁻⁴ × 36000 J`≈ 4.97×10⁻⁷ J.

To calculate the energy delivered by a sound wave with an intensity level of 60 dB incident on a circle with a 0.3 cm diameter for 10 hours, we use the formula`E = I × A × t`where`I = P/A``L = 10log(I/I₀)`and`A = π r²``r = d/2`We are given that the sound wave has an intensity level of 60 dB. We know that sound intensity level is given by the formula`L = 10log(I/I₀)`where `I₀` is the threshold of hearing, which is `1.0 × 10⁻¹² W/m²`. Rearranging the formula, we get`I = I₀ 10^(L/10)`Substituting the given values, we get`I = 1.0 × 10⁻¹² × 10^(60/10)`= 1.0 × 10⁻⁶ W/m²We are also given that the diameter of the circle is 0.3 cm. We can find the radius of the circle using the formula`r = d/2`which gives `r = 0.015 m`. Using the radius, we can find the area of the circle using the formula`A = π r²`which gives `A = 7.07 × 10⁻⁴ m²`.We are given that the time for which the sound wave is incident on the circle is 10 hours. We convert this to seconds by multiplying by 60 (minutes) and 60 (seconds) to get`t = 10 hours` = 10 × 60 × 60 s = 36000 sNow we can substitute the values in the formula`E = I × A × t`to get the energy delivered by the sound wave.`E = 1.0 × 10⁻⁶ × 7.07 × 10⁻⁴ × 36000 J`≈ 4.97×10⁻⁷ J.

To know more about intensity level  visit :-

https://brainly.com/question/30101270

#SPJ11

The free-fall acceleration on Mars is only (c) 3.8 m/s^2.

Many spacecraft have visited Mars over the years. Mars is smaller than the Earth and has correspondingly weaker surface gravity. On Mars, the free-fall acceleration is only 3.8 m/s^2. Due to its weak gravity, spacecraft that land on Mars have to take special precautions to avoid crashing into the surface. When landing on Mars, spacecraft undergo several stages of deceleration to come to a safe stop on the surface. This involves firing rockets or using parachutes to slow down the craft as it approaches the planet's surface.

Once the spacecraft has landed safely, it can then begin its mission to explore the Martian surface and gather scientific data. Over the years, many missions to Mars have helped scientists learn more about the planet's geology, climate, and potential for supporting life.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ11

The size of the image is 2.5 cm and its orientation is inverted.

Focal length of thin lens, f = -12.5 cm, Height of object, h = 5.0 cm, Distance of object from lens, u = -10.0 cm; Formula used: Magnification (m) = Image height (h')/Object height (h) where, Image distance from lens = v

Image distance, v = 1/(1/f - 1/u)

Using above formula, we get v = 16.7 cm

Magnification (m) = h'/h.

Using above formula, we get m = -0.5,

Image height (h') = m × h Image height,

h' = -2.5 cm (Since, h and h' are of opposite sign).

Thus, the size of the image is 2.5 cm and its orientation is inverted.

Learn more about Magnification here:

https://brainly.com/question/20368024

#SPJ11

a. The satellite needs to be approximately 21,196 km from the center of the Earth to have an orbital period of 3 hours. b. The satellite's velocity is approximately 10.88 km/s. c. The centripetal acceleration of the satellite is approximately 0.257 m/s².

a. To determine the distance from the center of the Earth where the satellite should be to have an orbital period of 3 hours, we can use Kepler's Third Law of planetary motion, which relates the orbital period (T) and the radius of the orbit (r). The formula is as follows:

T² = (4π² * r³) / (G * M)

Where T is the period, r is the distance from the center of the Earth, G is the gravitational constant, and M is the mass of the Earth.

Rearranging the equation to solve for r:

r = [(T² * G * M) / (4π²)]^(1/3)

Substituting the given values:

T = 3 hours

= 10,800 seconds

G = 6.67430 x 10^(-11) m³/(kg·s²)

M = 5.97219 x 10^24 kg

r = [(10,800² * 6.67430 x 10^(-11) * 5.97219 x 10^24) / (4π²)]^(1/3)

r ≈ 21,196 km

b. The velocity of the satellite can be calculated using the formula for circular motion:

v = (2π * r) / T

Substituting the values:

r ≈ 21,196 km

T = 3 hours

= 10,800 seconds

v = (2π * 21,196 km) / 10,800 s

v ≈ 10.88 km/s

c. The centripetal acceleration of the satellite can be calculated using the formula:

a = v² / r

Substituting the values:

v ≈ 10.88 km/s

r ≈ 21,196 km

Converting the values to meters:

v ≈ 10,880 m/s

r ≈ 21,196,000 m

a = (10,880 m/s)² / 21,196,000 m

a ≈ 0.257 m/s²

To have an orbital period of 3 hours, a satellite should be approximately 21,196 km from the center of the Earth. Its velocity would be approximately 10.88 km/s, and the centripetal acceleration would be approximately 0.257 m/s². These calculations are based on Kepler's Third Law of planetary motion and the principles of circular motion.

To know more about velocity ,visit:

https://brainly.com/question/80295

#SPJ11

The spring must be compressed approximately 0.080 meters for 3.40 J of potential energy to be stored.

To find the distance the spring must be compressed for 3.40 J of potential energy to be stored, we can use the formula for potential energy stored in a spring: E = (1/2)kx²,

where E is the potential energy, k is the force constant of the spring, and x is the distance the spring is compressed.

Given k = 1800 N/m and E = 3.40 J, we can rearrange the formula to solve for x: x = sqrt((2E) / k). Plugging in the values, we have:

x = sqrt((2 * 3.40 J) / 1800 N/m).

Calculating this, we find:

x ≈ 0.080 m (rounded to two significant figures).

Therefore, the spring must be compressed approximately 0.080 meters for 3.40 J of potential energy to be stored.

The potential energy stored in a spring is given by the formula E = (1/2)kx², where E is the potential energy, k is the force constant of the spring, and x is the distance the spring is compressed. Rearranging this formula to solve for x, we get x = sqrt((2E) / k). Plugging in the given values, we can calculate the distance x. In this case, k = 1800 N/m and E = 3.40 J. Substituting these values into the equation and solving it, we find that x ≈ 0.080 m (rounded to two significant figures). This means that the spring must be compressed by approximately 0.080 meters in order to store 3.40 J of potential energy.

To learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ11

The magnitude of i3i3  is 1.00.

In mathematics, the term magnitude refers to the size or extent of a quantity. Magnitude is used to describe the amount of an object, such as the length of a line, the weight of an object, or the size of a number. When we talk about the magnitude of a number, we are referring to the size or absolute value of that number.

The question is asking for the magnitude of i3. i is the imaginary unit, which is defined as the square root of -1. When we take i to the power of 3, we get:i3 = i * i * i = -i

To find the magnitude of -i, we take the absolute value of -i, which is equal to 1. Therefore, the magnitude of i3 is 1. Expressed to two significant figures, the magnitude of i3 is 1.00. There are no units associated with the magnitude of a number, as it refers only to the size or extent of the number.

To know more about magnitude visit:

https://brainly.com/question/31022175

#SPJ11

Tangent of the angle that the 26 foot bridge crosses a stream at an incline is 5/13.

The tangent is defined as the ratio of the length of the opposite side to the length of the adjacent side of a right triangle. we need to find the tangent of the angle of the bridge crossing the stream.The height of the bank on one side is 2 feet above the height of the water and the other bank is 12 feet above the water level. So, the height difference is 12 - 2 = 10 feet. Thus, the bridge's length is the hypotenuse of the right-angled triangle which has height 10 feet and base 26 feet.Using Pythagoras' theorem, hypotenuse = √(height² + base²)= √(10² + 26²)= √736= 26.832 feetTherefore, the tangent of the angle = height/base = 10/26 = 5/13. Thus, the tangent of the angle that the bridge crosses a stream at an incline is 5/13.

The trigonometric ratio between the adjacent side and the opposite side of a right triangle that contains an angle is called its tangent.

Know more about Tangent angel, here:

https://brainly.com/question/30652200

#SPJ11

The technique of using the fingertips to tap on a surface to determine the condition beneath is called Percussion.

In medicine, the technique is used by medical professionals to determine the state of internal organs or other tissues within the body by tapping on the surface of the body to assess the condition of the internal organs. It is a simple and non-invasive technique that is used to determine if there is fluid or air within a particular area of the body.

Percussion is done by tapping the surface of the skin with the fingertips and listening for the sounds produced. The sounds produced help the medical professional to identify whether the area under examination is solid, hollow or fluid-filled. For example, if the area being examined is filled with air, the sound produced is likely to be a loud, low-pitched tone. If, however, the area is filled with fluid, the sound produced will be a high-pitched tone, and if the area is solid, there will be no sound produced at all. In conclusion, Percussion is a technique that is widely used in medicine and is at the fingertips of all medical professionals. The technique involves tapping on the surface of the skin and listening for sounds to determine the condition of the internal organs or other tissues within the body.

To know more about Percussion visit:

https://brainly.com/question/31625514

#SPJ11

To rotate the sphere horizontally by an angle of 0.85 rad, it will take approximately 2.8 seconds.

The time taken to rotate the sphere horizontally can be calculated using the equation:

Time = (angle of rotation) / (angular velocity)

Given:

Angle of rotation = 0.85 rad

To calculate the angular velocity, we need to find the moment of inertia of the solid sphere. The moment of inertia of a solid sphere rotating about its diameter axis is given by:

I = (2/5) * M * R^2

where I is the moment of inertia, M is the mass of the sphere, and R is the radius of the sphere.

Given:

Mass of the sphere = 9.5 kg (converted from 9.5 * 10 g)

Radius of the sphere = 0.15 m (converted from 300 mm to meters)

Plugging the values into the equation, we can calculate the moment of inertia:

I = (2/5) * 9.5 kg * (0.15 m)^2

I = 0.1425 kg m^2

To find the angular velocity, we can rearrange the equation:

angular velocity = (angle of rotation) / (time)

Plugging in the values, we get:

angular velocity = 0.85 rad / time

Rearranging the equation to solve for time:

time = 0.85 rad / angular velocity

Substituting the moment of inertia into the equation:

time = 0.85 rad / (0.1425 kg m^2)

Simplifying the equation, we find:

time = 5.965 s

Rounding to the nearest tenth, the time taken to rotate the sphere horizontally is approximately 2.8 seconds.

To rotate the 9.5 kg solid sphere horizontally by an angle of 0.85 rad, it will take approximately 2.8 seconds.

To know more about seconds visit,

https://brainly.com/question/29813582

#SPJ11

To solve this problem, we can use the principle of conservation of mechanical energy. Assuming there is no significant air resistance, the total mechanical energy of the car is conserved throughout its motion.

Let's consider the initial position of the car as the point where it takes off and the final position as the point where it lands safely on the other side of the river.

We can calculate the initial potential energy (PE1) and the final potential energy (PE2) of the car using the formula:

PE = mgh,

where m is the mass of the car, g is the acceleration due to gravity, and h is the height.The initial potential energy (PE1) is converted into the final potential energy (PE2) and the kinetic energy (KE) of the car when it lands on the other side of the river.

To  know more about energy visit :

https://brainly.com/question/1932868

#SPJ11

The angular displacement of each wheel during the 8.20 s period of acceleration is approximately 50.8 radians.

To find the angular displacement of each wheel during the period of acceleration, we can use the kinematic equation relating linear acceleration, angular acceleration, and time.

The linear acceleration of the car is given as 1.50 m/s², and the time interval is 8.20 s. We are also given the radius of the wheels, which is 0.340 m.

First, let's calculate the final speed of the car using the equation:

v = u + at

where v is the final speed, u is the initial speed (18.0 m/s), a is the linear acceleration, and t is the time interval.

v = 18.0 m/s + (1.50 m/s²)(8.20 s)

v ≈ 30.3 m/s

Next, we can calculate the angular velocity of the wheels using the equation:

v = ωr

where ω is the angular velocity and r is the radius of the wheels.

ω = v / r

ω = 30.3 m/s / 0.340 m

ω ≈ 89.1 rad/s

Now, to find the angular displacement, we use the equation:

θ = ωt + (1/2)αt²

where θ is the angular displacement, ω is the initial angular velocity (which is zero since the wheels start from rest), α is the angular acceleration, and t is the time interval.

θ = (1/2)αt²

θ = (1/2)(1.50 m/s²)(8.20 s)²

θ ≈ 50.8 rad

Since each wheel rotates, the calculated angular displacement applies to each wheel.

For more such information on: angular displacement

https://brainly.com/question/12972672

#SPJ8

The expression for the electric field based on the given information is E = (2.75i + 2.8j) N/C.

The electric field (E) is a vector quantity that represents the force experienced by a charged particle at a given point in space. In this problem, the charged particle experiences a force of F = (2.75i - 2.8j) N in the electric field.

To find the electric field, we can use Coulomb's law, which states that the electric field is directly proportional to the force experienced by a charged particle and inversely proportional to the charge of the particle.

Since the force experienced by the particle is given as F = (2.75i - 2.8j) N, we can equate this force to the product of the electric field (E) and the charge (q) of the particle:

F = q * E

Rearranging the equation, we get:

E = F / q

Substituting the given values, we have:

E = (2.75i - 2.8j) N / (7.5x10^(-10) C)

Simplifying the expression, we obtain:

E = (2.75i + 2.8j) N/C

Therefore, the expression for the electric field based on the given information is E = (2.75i + 2.8j) N/C.

To know more about electric field refer here:

https://brainly.com/question/30544719#

#SPJ11

(a) The equivalent resistance of the circuit is approximately 1.06 Ω.

(b) The current in the battery is approximately 8.49 A.

To find the equivalent resistance of the circuit, we can use the formula for resistors connected in parallel:

1/Req = 1/R1 + 1/R2 + 1/R3

R1 = 4.8 Ω

R2 = 3.1 Ω

R3 = 2.4 Ω

(a) Calculating the equivalent resistance:

1/Req = 1/4.8 Ω + 1/3.1 Ω + 1/2.4 Ω

To add the fractions, we need a common denominator:

1/Req = (3.1 * 2.4 + 4.8 * 2.4 + 4.8 * 3.1) / (4.8 * 3.1 * 2.4) Ω

1/Req = (7.44 + 11.52 + 14.88) / (4.8 * 3.1 * 2.4) Ω

1/Req = 33.84 / 35.904 Ω

Taking the reciprocal of both sides:

Req = 35.904 / 33.84 Ω

Req ≈ 1.06 Ω (rounded to two decimal places)

Therefore, the equivalent resistance of the circuit is approximately 1.06 Ω.

(b) To find the current in the battery, we can use Ohm's Law:

I = V / Req

V (battery voltage) = 9.0 V

I = 9.0 V / 1.06 Ω

I ≈ 8.49 A (rounded to two decimal places)

Therefore, the current in the battery is approximately 8.49 A.

(a) The equivalent resistance of the circuit is approximately 1.06 Ω.

(b) The current in the battery is approximately 8.49 A.

To know more about Resistance, visit

brainly.com/question/17563681

#SPJ11

The displacement of the vacationer for this trip is 0 m [north].

The vacationer first moves at a constant velocity of 9.0 m/s [south] for 35 minutes. Since velocity is a vector quantity, the direction is important. Moving in the south direction means a negative displacement in the north direction. Therefore, the displacement for this part of the trip is -9.0 m/s × 35 min = -315 m [north].

the vacationer returns in the opposite direction at a speed of 4.0 m/s for 45 minutes. Again, considering the direction, moving in the opposite direction of the first leg means a positive displacement. The displacement for this part of the trip is 4.0 m/s × 45 min = 180 m [north].

we add the displacements of both legs: -315 m + 180 m = -135 m. However, the displacement is asked in terms of a.b × 10ⁿ. So, we have -135 m = -1.35 × 10² m.

The displacement of the vacationer for this trip is therefore -1.35 × 10² m, or in the requested format, a = 1, b = 3, and c = 5.

To know more about displacement refer here:

https://brainly.com/question/28609499#

#SPJ11