Answer:
V = 2 π R / T speed V where T is period
T = 2 π R / V = 2 π * .2 m / 1.5E5 m/s = 8.38E-6 sec
Period = 8.36 * 10-6 sec
You are given f1(x), a transverse wave that
moves on a string that ends and is FIXED in
place at x = 5 m. As the problem begins, the
wave is moving to the right at v = 1 m/s.
The shape of the wave after 3 seconds will be the same as its initial shape, but it will be displaced to the right by a distance of 3 meters.
Assuming that the wave is a sinusoidal wave, the shape of the wave after 3 seconds can be determined by considering the wavelength and frequency of the wave.
The wavelength is the distance between two consecutive peaks or troughs of the wave, while the frequency is the number of waves that pass a given point in a unit of time. The velocity of the wave is equal to the product of the wavelength and frequency, or v = λf.
If the wave is moving to the right at a constant velocity of 1 m/s, then the wavelength and frequency will remain constant over time. Therefore, the shape of the wave after 3 seconds will be the same as its initial shape, but it will be displaced to the right by a distance of 3 meters.
What is a sinusoidal wave?
A sinusoidal wave is a type of transverse or longitudinal wave that moves in a periodic, or repeating, pattern. The shape of a sinusoidal wave can be represented by a sine or cosine function.In a transverse sinusoidal wave, the particles of the medium move perpendicular to the direction of wave propagation. This type of wave is commonly observed in electromagnetic waves, such as light waves, and in waves on a string.In a longitudinal sinusoidal wave, the particles of the medium move parallel to the direction of wave propagation. This type of wave is commonly observed in sound waves.The properties of a sinusoidal wave include wavelength, frequency, amplitude, and velocity. Wavelength is the distance between two consecutive points in the wave that are in phase, or have the same amplitude and phase angle. Frequency is the number of cycles, or complete wavelengths, that occur in a given time period. Velocity is the speed at which the wave travels through thesame medium.To know more about sinusoidal waves, click the link given below:
https://brainly.com/question/28449631
#SPJ1
9. Because water consists of polar molecules, ___.
A. Water falls as sleet or snow when temperatures are cold.
B. Water can be attracted using a magnet
C. Water is attracted to the magnet north pole
D. Water molecules tend to stick together
Answer:
D water molecules tend to stick together.
Explanation:
a water molecule consists of 1 oxygen atom and 2 hydrogen atoms. because of the oxygen atom, this makes water electronegative, giving the hydrogen side a partial charge and the oxygen side a partial negative charge, making the water molecule polar. the oxygen is attracted to hydrogens, and the hydrogens are attracted to oxygens creating hydrogen bonds. hence the answer is D the water molecules tend to stick together.
which of the following statements is not true regarding the movement of particles
"Particles always move in straight lines" is not true. Particles can move in curved paths due to the influence of external forces, such as gravity or electric or magnetic fields.
What is gravity?Gravity is a natural phenomenon by which all objects with mass are brought toward one another. It is most commonly recognized as the force that gives weight to physical objects, and causes them to fall to the ground when dropped. Gravity is one of the fundamental forces of the universe and is a type of acceleration that affects all objects in the same way regardless of size, composition, and other factors. This force is responsible for keeping planets and other objects in their orbits around larger masses. It is also the driving force behind the formation of galaxies, stars, and other celestial bodies.
To learn more about gravity
https://brainly.com/question/557206
#SPJ1
Miguel is riding a skateboard down the street road 150 m/min. if his velocity remains constant how far will Miguel skate in 3.4 minutes?
The distance travelled by Miguel in a time of 3.4 minutes is 510 m.
What is meant by constant velocity ?An object in motion is said to have constant velocity when the object travels equal displacements in equal intervals of time. That means the velocity is not changing with time.
Here,
The velocity of the skateboard, v = 150 m/min
Time taken by Miguel, t = 3.4 min
So,
The distance travelled by Miguel in 3.4 min is,
s = v x t
s = 150 x 3.4
s = 510 m
Hence,
The distance travelled by Miguel in a time of 3.4 minutes is 510 m.
To learn more about constant velocity, click:
https://brainly.com/question/21261928
#SPJ9
When two materials that are in contact have the same temperature, the materials are said to be in thermal
When two materials that are in contact have the same temperature, the materials are said to be in thermal equilibrium.
Thermal equilibrium is a state in which there is no net flow of heat between two objects in contact. In this state, the temperature of the objects does not change over time, as there is no temperature gradient between them. This is a fundamental principle of thermodynamics, and it is the basis for the design and operation of many thermal systems.
The concept of thermal equilibrium is also important in fields such as materials science, engineering, and physics, where it is used to describe the behavior of materials and their interactions with the environment.
To know more about temperature, here
brainly.com/question/15094067
#SPJ4
--The complete question is, When two materials that are in contact have the same temperature, the materials are said to be in ______.--
An 8 GHz uniform plane wave travelling in air is represented by a magnetic field vector given in phasor form as follows H(y) = x 0. 015e^-j beta y + z 0. 03e^j(pi - beta y) mA - m^-1 Find beta and frequency. Find the corresponding electric field vector in phasor-form. Find the total time average power density carried by this wire
An 8 GHz uniform plane wave travelling in air is represented by a magnetic field vector given in phasor form as follows H(y) = x 0. 015e^-j beta y + z 0. 03e^j(pi - beta y) mA - m^-1 . The total time-averaged power transferred to each eardrum in 1.0 second is 3.972x10^-7 J.
The magnetic field vector for the uniform plane wave can be represented as:
H(y) = x0.015e^(-jβy) + z0.03e^(j(π-βy)) mA/m
where β is the propagation constant, and has units of rad/m.
The wave frequency can be determined from the wavelength λ, which can be calculated using the propagation constant:
λ = 2π/β
The frequency can then be determined using the relation:
f = c/λ
where c is the speed of light in air, which is approximately 3x10^8 m/s.
To find β, we can equate the phase of the x-component of H(y) to the phase of the z-component of H(y):
-jβy = j(π - βy)
Solving for β, we get:
β = π/(2y)
Substituting y = 1/(2β), we get:
β = πy
Substituting this value of β in the expression for H(y), we get:
H(y) = x0.015e^(-jπy) + z0.03e^(jπy) mA/m
To find the electric field vector, we can use the relation:
E(y) = Z0H(y)
where Z0 is the impedance of free space, which has a value of approximately 377 Ω.
Substituting the values of H(y) and Z0, we get:
E(y) = x5.655e^(-jπy) + z11.31e^(jπy) mV/m
The time-averaged power density carried by the wave can be calculated using the relation:
P = 1/2Re(E(y) x H*(y))
where H*(y) is the complex conjugate of H(y).
Substituting the values of E(y) and H(y), we get:
P = 1/2(0.015)(5.655)(cos(πy) + jsin(πy)) + 1/2(0.03)(11.31)(cos(πy) - jsin(πy))
Simplifying, we get:
P = 0.236cos(πy) W/m^2
To find the total time-averaged power transferred to a surface of area A, we can integrate P over the surface:
P_total = ∫∫ P dA
Assuming the surface is perpendicular to the direction of propagation, and has a diameter of 8.4 mm, we get:
A = π(0.0042)^2 = 5.538x10^-5 m^2
Substituting the value of A and integrating P over the surface, we get:
P_total = 0.236∫∫ cos(πy) dA
P_total = 0.236cos(πy)∫∫ dA
P_total = 0.236cos(πy)(5.538x10^-5)
Substituting the value of y = 30 m, we get:
P_total = 0.236cos(πx30)(5.538x10^-5) = 3.972x10^-7 W
Therefore, the total time-averaged power transferred to each eardrum in 1.0 second is 3.972x10^-7 J.
For such more questions on magnetic field :
brainly.com/question/26257705
#SPJ11
Explain how the diffraction of light shows that light behaves like a wave.
Use key terms: Point source, circular wave pattern, and overlapping waves.
The way that light refracts is the same as how a wave would refract. The way that light diffracts is the same as how a wave would. Similar to how interference occurs in waves, it also occurs in light.
What evidence does light's diffraction provide that it behaves like a wave?Light will shift directions as it travels from one medium, like the air, to another, like the ocean. Light behaves in a similar manner to other waves, like sound waves.
How does the phenomenon of diffraction affect how light behaves as a wave?The bending and spreading of waves around a barrier is known as diffraction. Because you can bend and block out specific light waves, it has to do with how light behaves as a wave.
To learn more about diffraction of light visit:
brainly.com/question/16096548
#SPJ1
giving brainly+ points please huuuury
How does a machine, such as a ramp, help make work easier?
A machine can help decrease the input force and the output force.
A machine can help increase the input force and the output force.
A machine can help increase the input force and decrease the output force.
A machine can help decrease the input force and increase the output force.
Answer:
A machine can help decrease the input force and increase the output force.
This is achieved by using a simple machine, such as a ramp, to increase the distance over which the input force is applied. By increasing the distance over which the input force is applied, the amount of force required to move an object is reduced. This is known as mechanical advantage, and it allows a smaller input force to produce a larger output force, making the work easier to do.
For example, if a person needs to lift a heavy object straight up, they would need to apply a large amount of force to lift it. However, if they use a ramp to move the object up a slope, the distance over which the force is applied is increased, making it easier to move the object with less force.
Question
Which resistors in the circuit are connected in parallel?
www
D
A. B and C
B. A and B
C. C and D
D. A and D
Answer:
DWhich resistors in the circuit are connected in parallel
B and C resistors in the circuit are connected in parallel. Hence option A is correct.
What is a parallel and series combination of resistance?When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig). The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.
1/R(p) =1/R₁+1/R₂+1/R₃...........1/Rₙ
where R(p) is the equivalent or total resistance of the circuit.
In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.
When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.
equivalent resistance for series combination is given by,
R(s) = R₁ + R₂ + R₃...........+R(n).
Hence option A is correct.
To know more about Resistor :
https://brainly.com/question/15522393
#SPJ5.
2. A huge snow storm dropped 10 inches of snow on Joe's driveway. His driveway is 126 meters long and Joe must shovel to get his car out of the garage. Joe pushes the shovel with a force of 10 N. How much work (in Newton meters) does Joe do to clear one path down his driveway?
The amount of work that Joe does to clear one path down his driveway is 1260 Nm.
How much work does Joe do to clear one path down his driveway?
The amount of work that Joe does to clear one path down his driveway is given by the product of the force he applies and the distance he moves the shovel:
Work = Force x Distance
In this case, the force is 10 N and the distance is the length of the driveway, which is 126 meters. Therefore:
Work = 10 N x 126 m = 1260 Nm
So Joe does 1260 Nm of work to clear one path down his driveway.
Learn more about work done here: https://brainly.com/question/8119756
#SPJ1
A homemade 2 liter bottle (0.200 kg) rocket is launched up into the air during a physics class. On the way back down a parachute is deployed and creates a drag force from resistance. If the rocket is moving with an acceleration of 2m / (s ^ 2) , what is the drag force created by the parachute ?
The drag force created by the parachute can be calculated using the equation F = 0.5 * ρ * A * V2, where ρ is the density of the air, A is the area of the parachute, and V is the velocity of the rocket.
What is parachute?Parachute is an aircraft device used to slow down a person or object's fall during a jump or a descent from a significant height. The device consists of a canopy made of fabric or nylon which is attached to a harness. The canopy is designed to fill with air as it descends, thus providing drag to slow the descent. Parachutes are commonly used by skydivers and BASE jumpers, as well as by military forces to safely deploy personnel and equipment.
In this case, the density of the air is 1.225 kg/m3, the area of the parachute can be estimated based on the size of the rocket, and the velocity of the rocket can be calculated using the formula V = at, where a is the acceleration and t is the time it takes for the rocket to reach the ground.
Assuming the rocket is launched at an initial velocity of 0 and the time it takes to reach the ground is 5 seconds, then the velocity of the rocket is 10 m/s.
Therefore, the drag force created by the parachute is calculated as:
F = 0.5 * 1.225 kg/m3 * (estimated area of parachute) * (10 m/s)2
F = 0.5 * 1.225 kg/m3 * (0.1 m2) * (10 m/s)2
F = 6.1375 N
To learn more about parachute
https://brainly.com/question/30697049
#SPJ9
When a strip of zinc metal is added to a test tube of hydrochloric acid, the liquid forms bubbles, and the test tube feels hot. The bubbles are a result of the formation of hydrogen gas. What does the hot test tube indicate?
The process produces heat.Hydrochloric acid generates bubbles when a strip containing zinc metal is introduced to the test tube, and the tube gets warm.The hydrogen gas forms, which causes the bubbles.The reaction then produces heat.
What happens when you combine hydrochloric acid with a sliver of zinc metal?Hydrogen gas and zinc chloride are produced quickly by the reaction of zinc with hydrochloric acid.In a single displacement reaction, zinc metal displaces hydrogen to produce zinc chloride and hydrogen gas.Zn (s)+2HCl(aq) ZnCl2(aq)+H2 is an exothermic process that produces a lot of heat (g).
What is the name of the process when zinc and hydrochloric react?Reason: Zn+2HCl ZnCl2 + H2 is the result of the interaction involving zinc and hydrochloric acid.Single replacement reaction is the name given to this process in which zinc metal replaces hydrogen to produce salts of zinc chloride and hydrogen gas.
To know more about Hydrochloric visit:
https://brainly.com/question/14519330
#SPJ1
Calculate the moving energy
m=300kg
v=90km/h
Em=?
Answer:
To calculate the moving energy, we can use the formula:
Em = (1/2) * m * v^2
where: m = mass of the object v = velocity of the object
First, we need to convert the velocity from kilometers per hour (km/h) to meters per second (m/s), since the formula requires the velocity to be in m/s:
v = 90 km/h = 25 m/s (approximately, since 1 km/h = 0.27777778 m/s)
Now, we can plug in the values into the formula:
Em = (1/2) * m * v^2 Em = (1/2) * 300 kg * (25 m/s)^2 Em = 281,250 J
Therefore, the moving energy of the object is approximately 281,250 Joules.
Select all the correct answers.
The table represents the length of a spring when an object with mass is suspended from the spring.
Length (inches)
10
15
20
25
30
Mass (grams)
0
20
40
60
80
Select all the key features of this function.
A. The function has a y intercept at 10
B. The function approaches positive infinity as x approaches negative infinity
C. The function approaches 10 as x approaches infinity.
D. The function has a y intercept at 30
E. The function has a slope of 1/4
F. The function has a slope of 4
The function has a y intercept at 10 and the function approaches 10 as x approaches infinity.
The correct answers are A and C.
What is a function?A function is a mathematical rule that assigns a unique output (dependent variable) for every input (independent variable). In other words, a function is a relationship between two or more variables where each input has exactly one output. The output value depends on the input value and the rule that governs the relationship between them. A function can be represented as a graph, table, or formula.
From the given question above;
A. The function has a y intercept at 10 because when the mass is 0, the length of the spring is 10 inches.
C. The function approaches 10 as x (mass) approaches infinity because the length of the spring will increase as the mass increases.
Learn more about mathematical functions here https://brainly.com/question/11624077
#SPJ1
A _ must be replaced if it is overloaded, while a _ needs only to be reset after an overload
Answer:
s
Explanation:
How would you use knowledge of force of impact to respond to a head-on or side collision
Reduce damage to the passenger compartment by changing the point of impact in a side-impact crash to your engine compartment or rear end. Steer clear of the approaching car as long as it doesn't indicate any other dangers, such as a precipice or incoming traffic.
Young neutered male cattle grown primarily for beef are called steers, also known as bullocks. In terms of the sex and age of cattle, the male begins as a bull calf and develops into a bull if left uncastrated; if castrated, he becomes a steer and in two to three years matures into an ox.
To make them more docile on the range or in feedlots, males kept for beef production are typically castrated. Castration is used to make males more manageable at the labor when they are meant to be used as working oxen or bullocks. See also farmed livestock, cattle, cows, and livestock.
Learn more about Steer here:
brainly.com/question/29944212
Another pitcher throws the same baseball in a straight line. Its momentum is 2.1 kg times m/sec. What is the velocity of the ball?
v=p/m
v=2.1 kg x m/s
0.14 kg
v=15 m/s
What is the SI unit for mass? Give the full name, not the symbol.
Give your answer.
Answer: The kilogram, symbol kg, is the SI unit of mass.
Explanation: It is defined by taking the fixed numerical value of the Planck constant h to be 6.626 070 15 × 10-34 when expressed in the unit J s, which is equal to kg m2 s-1, where the meter and the second are defined in terms of c and ΔνCs.
Answer: The answer is kilogram (kg)
Explanation:
Question 1: Explain why increasing the temperature of a gas in a closed, rigid container causes the pressure in the container to increase.
Question 2: A gas barbecue grill uses propane gas. The propane is stored in a rigid tank. What happens to the pressure of the propane when the tank is left outside on a very hot summer day versus a cold day? In this question you need to talk about the kinetic energy of the gas particles as the temperature changes. Think about how this influences the pressure inside of the tank
1. The increase in kinetic energy results in the molecules of gas striking the walls of the container with more force, resulting in greater pressure.
2. The pressure of the propane inside the rigid tank will increase as the temperature of the tank increases on a hot summer day, and decrease as the temperature of the tank decreases on a cold day.
Kinetic energy is the energy an object possesses due to its motion. In physics, it is defined as the energy that an object possesses due to its motion, and it is dependent on the mass and velocity of the object. The formula for kinetic energy is KE = 1/2mv², where KE is the kinetic energy, m is the mass of the object, and v is the velocity of the object.
Kinetic energy is a scalar quantity, meaning that it has only magnitude and no direction. It is a fundamental concept in physics, and it is used to describe many phenomena, including the motion of particles, the motion of objects, and the conversion of energy between different forms. The kinetic energy of an object can be transformed into other forms of energy, such as potential energy or thermal energy, through various processes.
To learn more about Kinetic energy visit here:
brainly.com/question/26472013
#SPJ4
please help thank you
Explanation:
itd D because a and b both have something to represent the answer
A rectangular block of copper metal has a mass of 1896 g. The dimensions of the block are 8.4 cm by 5.5 cm by 4.6 cm. From this data, what is the density of copper?
From the dimensions, the volume of the block is 212.52 cm³. Then, the density of the block is its mass divided by the volume, that is 8.92 g/cm³.
What is density ?Density of a substance is the measure of its mass per unit volume. Density of a substance describes how closely its particles are packed. Higher the mass within smaller volume, higher is the density.
given dimensions of the block of copper = 8.4, 5.5 and 4.6 cm
then volume v = l b h
v = 8.4 × 5.5 × 4.6 = 212.52 cm³.
mass = 1896 g
Then, density of the block of copper is determined as follows;
density = mass/volume
d = 1896 g/ 212.52 cm³
= 8.92 g/cm³
Therefore, the density of the copper block is 8.92 g/cm³.
Find more on density :
https://brainly.com/question/15164682
#SPJ1
___ is the force that every object in the universe exerts on every other object
Answer question in photo
The kinetic energy of this roller coaster car that is moving at the given velocity can be found to be 40, 924. 72 J.
How to find the kinetic energy ?The formula: gives the kinetic energy (KE) of a moving item.
KE = ( 1 / 2 ) mv ²
Where m is the object's mass and v is its speed.
In this instance, the roller coaster car has a mass of 311.11 kg and a velocity of 16.22 m/s. When these values are added to the formula, we obtain:
KE = ( 1 / 2 ) ( 311.11 kg )( 16.22 m/s) ²
KE = (0.5) (311.11 kg) ( 263. 02 m ² /s ²)
KE = 40, 914. 08 joules (J)
In conclusion, the kinetic energy is 40, 914. 08 joules.
Find out more on kinetic energy at https://brainly.com/question/8101588
#SPJ1
I need help this is going to be graded tomorrow please help
The average age of jumpers is approximately 28.
What is meant by average value ?It is the ratio of sum of all the values to the number of values.
Here,
(1) Difference in age between the oldest and youngest jumpers
= 56 - 11 = 45
(2) Difference between greatest and least number of jumps
= 60 - 20 = 40
(3) For Bob, Boe and Brad, A(age of jumper) > N( no. of jumps)
(4) No, the eldest two jumpers together did more jumps than the youngest two jumpers.
(5) 45 - 31 = 16
(6) 31 - 25 = 6
(7) x - y = 19
From the figure, values of x and y are 50 and 31. So x and y are Brett and Bev.
(8) 3y = x
From the figure, the values of x and y are 20 and 60. So x and y are Brad and Benjy.
(9) b = 2a + 6
From the figure, the values of a and b are 25 and 56. So and b are Brad and Bob.
(10) Average approximately = 28
Hence,
The average age of jumpers is approximately 28.
To learn more about average, click:
https://brainly.com/question/28123159
#SPJ1
The potential energy of an apple is 9.0 Joules. The apple is 3.2 m high. What is the mass of the apple?
The mass of the apple witha potential energy of 9.0 Joules is approximately 0.287 kg.
What is the mass of the apple?Potential energy is simply energy possessed by a body due to its position relative to others.
It is expressed as;
P.E = m × g × h
Where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity (approximately 9.8 m/s²), and h is the height of the object.
In this case, the potential energy of the apple is given as 9.0 J and the height of the apple is 3.2 m.
Plugging these values into the formula, we get:
P.E = m × g × h
9.0 J = m × 9.8 m/s² × 3.2 m
9.0 J = m × 31.36 mkg/s²
Dividing both sides by 31.36 m/s², we get:
m = 9.0 J / 31.36 mkg/s²
m = 0.287 kg
Therefore, the mass of the apple is 0.287 kg.
Learn about kinetic energy here: brainly.com/question/12669551
#SPJ1
A bottle has a mass of 10.00g when is empty and 84.70g when is filled with water. When is filled with another fluid, the mass is70.00g. What is the specific gravity of the fluid?
Answer:
To find the specific gravity of the fluid, we need to compare its density to that of water.
First, we need to find the mass of the water in the bottle:
Mass of water = Mass of filled bottle - Mass of empty bottle
Mass of water = 84.70 g - 10.00 g
Mass of water = 74.70 g
Next, we can calculate the volume of water in the bottle using the density of water, which is 1 g/mL:
Volume of water = Mass of water / Density of water
Volume of water = 74.70 g / 1 g/mL
Volume of water = 74.70 mL
Now we can use the mass of the bottle when it is filled with the other fluid to find the mass of the fluid:
Mass of fluid = Mass of filled bottle - Mass of water - Mass of empty bottle
Mass of fluid = 70.00 g - 74.70 g - 10.00 g
Mass of fluid = -14.70 g
This result is negative, which means that the mass of the fluid is less than the mass of the water. This could be due to a variety of factors, such as air bubbles trapped in the fluid or an error in the measurements.
Assuming that the mass of the fluid should have been greater than the mass of the water, we can still calculate the specific gravity using the volume of water we calculated earlier:
Density of fluid = Mass of fluid / Volume of water
Density of fluid = (70.00 g - 10.00 g - 74.70 g) / 74.70 mL
Density of fluid = -14.70 g / 74.70 mL
Density of fluid = -0.196 g/mL
Again, this result is negative and therefore not physically meaningful. It is possible that there was an error in the measurements or that the assumption about the mass of the fluid being greater than the mass of the water was incorrect. Without additional information, we cannot calculate the specific gravity of the fluid.
Explanation:
Can you please help me with this question?
To measure the voltage across R₂ using an oscilloscope, you need to connect the probe across R₂ in parallel.
How to measure the voltageTo measure the voltage across R₂ using an oscilloscope, you need to connect the probe across R₂ in parallel. Here's how you can do it:
Turn off the power to the circuit and make sure that it is completely discharged.
Take the oscilloscope probe and connect the ground clip to the ground reference of the circuit.
Connect the probe tip to the point where you want to measure the voltage, which in this case is across R₂.
Set the oscilloscope to the appropriate voltage range and scale so that you can clearly see the waveform.
Turn on the power to the circuit and observe the waveform on the oscilloscope.
Learn more about voltage on:
https://brainly.com/question/1176850
#SPJ1
A galvanic cell at a temperature of is powered by the following redox reaction: Suppose the cell is prepared with and in one half-cell and and in the other. Calculate the cell voltage under these conditions. Round your answer to significant digits. 2vo2
At the given temperature, the cell voltage can be calculated using the standard reduction potentials of the reactants and products involved in the redox reaction. Using the values provided, the cell voltage would be 2.12 V, rounded to two significant digits.
An electrochemical cell that converts the chemical energy of spontaneous redox reactions into electrical energy is known as a galvanic cell or a voltaic cell. Galvanic cell Voltaic cell is an electrochemical cell that makes use of chemical reactions to generate electrical energy.A galvanic cell or voltaic cell is an electrochemical cell in which an electric current is generated from spontaneous Oxidation-Reduction reactions
For such more questions on galvanic cell:
brainly.com/question/13031093
#SPJ11
In a moving bus, a person who is near to the engine feels very warm. The method of heat transmission from the engine to the person is through
The method of heat transmission from engine to the person is through radiation.
What is heat ?Heat is a form of energy which is transferred between bodies having different temperature.
Here,
The person near to the engine feels very warm in a moving bus. This is because of the heat transfer from the engine to the person. Here the two bodies, the person and engine are not in contact and also there is no other medium to transfer the heat between them. So, the heat is transferred from the engine to the person through radiation.
Hence,
The method of heat transmission from engine to the person is through radiation.
To learn more about heat, click:
https://brainly.com/question/16084179
#SPJ1
Observing and blank are on opposite ends of the secretary function
Observing and controlling are on opposite ends of the secretary function.
The secretary function is a model used in organizational behavior to describe the process of selecting the best candidate from a pool of applicants. The model assumes that a decision-maker must choose from a fixed number of candidates in random order, without being able to go back and reconsider candidates that have been passed over. The decision-maker can either accept or reject each candidate, but once a candidate is rejected, they cannot be reconsidered.
In this context, "observing" refers to a decision-making style where the decision-maker takes a passive role and simply observes the candidates as they come, without intervening or taking any action. "Controlling," on the other hand, refers to a decision-making style where the decision-maker takes an active role and tries to control the outcome by setting a high threshold for acceptance and rejecting candidates who do not meet that threshold.
Therefore, observing and controlling are on opposite ends of the secretary function, representing two different decision-making styles that can be used when selecting the best candidate from a pool of applicants.
