An element has an atomic number 17.How many electrons are present in K,L and M shells of the atom?

The half-life of fluorine-21 is approximately 15.8 seconds.

The half-life of a radioactive isotope is a measure of the time it takes for half of the original amount of the isotope to decay. In the case of fluorine-21, the original sample had a mass of 80.0 milligrams. After 8.32 seconds, only 20.0 milligrams of this original sample remained unchanged. To calculate the half-life of fluorine-21, we can use the equation:

Half-life = (8.32 seconds) × (ln(80.0 mg / 20.0 mg) / ln(2))

where ln(80.0 mg / 20.0 mg) is the natural logarithm of the ratio of the initial to remaining mass, and ln(2) is the natural logarithm of 2.

Half-life = 8.32 × (2.302 / 0.693) seconds

Half-life = approximately 15.8 seconds

So, the half-life of fluorine-21 is approximately 15.8 seconds. This means that, if we started with 80.0 milligrams of fluorine-21, after 15.8 seconds, only half of that original amount (or 40.0 milligrams) would remain unchanged.

to learn more about half-life visit: https://brainly.com/question/1160651

#SPJ4

The molarity of a solution that was prepared by dissolving 82.0 g of calcium chloride in enough water to make 812 mL of solution is 0.91M.

Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution

The Molarity of a solution can be calculated using the following formula:

Molarity = no of moles ÷ volume

According to this question, a solution was prepared by dissolving 82.0 g of calcium chloride in enough water to make 812 mL of solution. The molarity can be calculated as follows:

no of moles of Calcium chloride = 82.0g ÷ 110.98 g/mol = 0.74 mol

Molarity = 0.74 ÷ 0.812 = 0.91M

Learn more about molarity at: https://brainly.com/question/29884686

#SPJ1

The Grignard reaction will fail in the presence of water as the Grignard reagent will get destroyed by reacting with acidic hydrogen atoms of water.

Hence, D. water is the correct option.

The Grignard reaction is basically an organometallic chemical reaction which involves a Grignard reagent. A Grignard reagent is the alkyl, vinyl, allyl, or aryl-magnesium halides. It is reacted with a particular carbonyl group which is  in an aldehyde or in a ketone. This reaction is crucial  for the formation of the carbon–carbon bonds.

The Grignard reagent tends to get destroyed by the reaction with acidic hydrogen atoms present in the water, phenols, alcohols, or in the carboxylic acid groups. Therefore, Grignard reaction fails in the presence of water.

To know more about Grignard reagent here

https://brainly.com/question/29031148

#SPJ4

f1 refers to the first electron shell or energy level in an element's electron configuration.

In the periodic table, elements are arranged based on the number of protons in their nucleus and the electron configuration of each element.

The electron configuration specifies the arrangement of electrons in each of the element's energy levels. The first energy level, denoted as f1, is the closest to the nucleus and can contain a maximum of 2 electrons.

This information is useful for determining the chemical and physical properties of elements, including their reactivity and bonding behavior.

To learn more about element , visit:

https://brainly.com/question/17105472#

#SPJ11

The sum of the numbers of neutrons(present in the atomic nucleus) and electrons(present outside the atomic nucleus) in the ion 116sn3+ is 113.

Atomic number of Sn (Tin) is 50. This means that isolated Sn atom has 50 electrons. Number of electrons = number of protons in nucleus. So, isolated Sn atom has 50 protons in nucleus. According to question, we have Sn3+ ion. This ion lost 3 electrons from its valence shell. But, the 50 protons still remain in its nucleus. Now, atomic mass = number of protons + number of neutrons in atomic nucleus. Given atomic mass number is 116. Hence, 116 = 50 + number of neutrons in atomic nucleus. Thus, number of neutrons in atomic nucleus = 116 - 50 = 66. The question asked for the sum of the numbers of neutrons and electrons in the ion 116sn3+ , which is 66+ 47 = 113.

To know more about atomic nucleus, click here : https://brainly.com/question/1268608

#SPJ4

My claim is that infrared photography can be used to visualize temperature differences by capturing the infrared radiation emitted by objects and converting it into visible light, with warmer objects appearing brighter and cooler objects appearing darker in the final image. This is because all objects emit some level of infrared radiation, and the amount of radiation emitted increases as the temperature of the object increases. By using a specialized camera that is sensitive to infrared radiation, it is possible to capture these differences in radiation and convert them into visible light, allowing the viewer to see temperature variations in the final image.

The number of protons and neutrons in 16o will be 8 protons + 8 neutrons, 17o will be 8 protons + 9 neutrons and 18o will be 8 protons +10 neutrons.  

Isotopes are the two or more types of atoms (or nuclides is the technical term) that have the same atomic number (number of protons in their nuclei) as well as the position in the periodic table (and hence belong to the same chemical element), and that is differ in nucleon numbers (mass numbers) due to the different numbers of neutrons in their nuclei

Oxygen has three stable isotopes: 16o, 17o, and 18o. The atomic number of an element is the total number of protons in an isotope. The number of neutrons is the difference between the mass as well as the atomic number

16= 8 protons + 8 neutrons

17= 8 protons + 9 neutrons

18= 8 protons +10 neutrons

To know more about isotopes here

https://brainly.com/question/11680817

#SPJ4

Pentose sugars include (Glyceraldehyde) and (None of the Above).

c are a class of monosaccharides, which are simple sugars, consisting of five carbon atoms. They are crucial components of many biological processes, including the synthesis of nucleic acids (DNA and RNA) and the production of energy. Ribose, which is a component of RNA, is the most prevalent pentose sugar. Xylose, a pentose sugar that is present in many plant cell walls and is utilised as a sweetener, is a further significant pentose sugar. Pentose sugars, in contrast to hexose sugars (such as glucose and fructose), cannot be digested by humans and must be consumed through diet. They are crucial for the creation of biofuels as well since they may be fermented to create ethanol. In conclusion, pentose sugars are essential parts of numerous biological systems.

Learn more about Pentose sugars here:

https://brainly.com/question/14086318

#SPJ4

Moseley offering a different explanation than Mendeleev on the organization of elements advance science by option  B. It established atomic numbers as the basis for the periodic table

The empirical knowledge is important by option D. It helps scientists make observations.

Moseley's contribution to the organization of elements advanced science by establishing atomic numbers as the basis for the periodic table (Option B). This helped to improve the accuracy of the periodic table, making it possible to predict the properties of new elements based on their atomic number.

Therefore, Empirical knowledge is important because it provides science with facts (Option A). Empirical knowledge is based on observations and experiences, which can be tested and verified through experiments. This helps to build a solid foundation for scientific understanding, as empirical knowledge provides a basis for scientific theories and models.

Learn more about Mendeleev from

https://brainly.com/question/11286917

#SPJ1

Polyethylene differs from oil, grease, and wax in a way that polythene is a tough plastic while the wax or grease is brittle solid.

Polyethylene is a long chain of ethylene, C2H6, which are molecules attached end-to-end in generally a straight chain. Oils, greases, and wax are a mixture of multiple hydrocarbon molecules which randomly combined in more of a mixture. Because of the high molecular weight of polythene, it is a tough plastic while the wax or grease is brittle solid.

One major difference among polymers and small molecules or monomers are the characteristics which polymers exhibit. Polymers generally have higher viscosities, higher boiling points and can present improved mechanical strength over small molecules or monomers.

Learn more about polymers at: https://brainly.com/question/17354715

#SPJ4

The right answer is (d) all of these. 4-aminobutanol/h, 5-aminobutanol/h, and 6-amino-2-hexanone/h can all be used to make cyclic imines.

In the intraperitoneal mouse bioassay, the newly identified class of marine biotoxins known as cyclic imines (CIs) causes a characteristically quick death. These poisons are macrocyclic substances having imine (a double bond between carbon and nitrogen) and spiro-linked ether moieties. chemical makeup. The cyclic imine group, which is typically found as a spiroimine, and the spiroketal ring system are two highly conserved moieties that make up the overall chemical structure of cyclic imine toxins. The macrocyclic ring of cyclic imine toxins has 14 to 27 carbon atoms.

Learn more about imines here:

https://brainly.com/question/22944136

#SPJ4

The molar mass of unknown gas is 38.65 gm  

We know that the Ideal gas equation is

PV = n R T

at Standard temperature and pressure

P = 1 atmospheric pressure

T= 273.15 Kelvin

R  = 8.3144598

V= 14.24

number of moles =  [tex]\frac{given mass}{molar mass}[/tex]

Ar  molar  mass= 40

Ar moles = 6.3/40

Ne = 20

Ne moles = 6.3 / 20

m= unknown gas

m = 6.3 / m

We know that at STP 1 mol of any gas is 22.4 l

we can obtain the total number of moles of the mixture by dividing it by 22.4L as 14.24/22.4=  0.635

0.635 =  Ar moles  + Ne moles  +  unknown gas moles

0.635 =  0.472 +  6.3/ m

m = 38.65 gm  

To know more about Molar mass

brainly.com/question/7585012

#SPJ4

The following nuclear reactions occur: 1h + 9be x + n (a) The resultant isotope of the process is represented by x. (b) 12c + 1h → x (15n + 1h 4he + x) The resultant isotope.

of the process is represented by x. Nuclear reactions are changes to an atom's nucleus that result in the production of new isotopes and/or the release of energy. They can happen naturally or be caused by blasting the nucleus with particles or radiation. Nuclear processes are classified into two types: nuclear fusion and nuclear fission. Nuclear fusion occurs when two light atomic nuclei unite to produce a heavier nucleus, releasing a significant quantity of energy. A heavy nucleus is divided into two lighter nuclei in nuclear fission, releasing a tremendous quantity of energy.

learn more about Nuclear  here:

https://brainly.com/question/18187269

#SPJ4

$70 won't be enough to buy 15 pizzas. Since, the total money required to feed everyone is $73.9.

4 slices of pizza for each person

The amount of pizza required for 15 person => 15 x 4 = 60

12 slices get fro 1 pizza

Hence, the number pizza required => 60/12 => 5

The cost of 5 pizzas = 5 x $14.78 = $73.9

Everyone is worried about the rising cost of living right now since it is affecting their own finances. Issues about money can also affect our well-being and mental health. It's typical to experience depression or anxiety if you have to make difficult choices concerning what you can afford.

Learn more about money here:

brainly.com/question/18193771

#SPJ4

In general, metals are characterized by the listed metals (A) brittleness, (D) high electrical conductivity, (F) high thermal conductivity

1) Brittleness: Metals are known to be brittle, which means they have low ductility and tend to break or crack when subjected to stress, instead of deforming plastically. This property is due to the metallic bonding between atoms, which creates a rigid structure that is not easily deformed.

2) High electrical conductivity: Metals are good electrical conductors, meaning they allow electricity to flow easily through them. This property is due to the presence of free electrons in the metal's structure, which are able to move and carry electrical charges.

3) High thermal conductivity: Metals have high thermal conductivity, meaning they can easily transfer heat from one point to another. This property is due to the metallic bonding between atoms, which allows for efficient transfer of heat-carrying phonons throughout the metal's structure. This makes metals good choices for many industrial applications that require efficient transfer of heat, such as in electrical equipment, heat exchangers, and heat pipes.

To know more about metal please refer: https://brainly.com/question/29400906

#SPJ4

In a carbonate ion, the all three C - O bonds have the same length of 136 pm because the all resonance hybrid have the same bond order.

In the carbonate ion, CO₃²⁻ has the resonance structure. The total possible resonance structures are three in the carbonate ion. In the resonance structure of the carbonate ion , the all the C - O bonds have the partially double bond character. Therefore all the resonance hybrid , C - O bonds have the same bond order.

Thus, the all the three C - O bonds in the carbonate ion are same that is 136 pm.

To learn more about bond here

https://brainly.com/question/29786731

#SPJ4

The number of electrons, protons, and neutrons does the isotope of 34/16 sulfur atom contain are 16, 16, and 18 respectively.

The atomic number is equal to the amount of protons in the atom's nucleus (Z). In a neutral atom, there are precisely as many electrons as protons. The overall number of protons and neutrons in the atom's nucleus is equal to the mass number (M) of the atom.

Atomic mass number = number of proton + number of neutron

The sulphur mass number => 34

Proton number = 16

Neutron => 34-16 => 18

The overall number of protons and neutrons in an atom's nucleus is termed as the mass number in nuclear physics.

Neutrons are neutral subatomic particles that are contained in all atomic nuclei, with the notable exception of common hydrogen. Its rest mass is 1.67492749804 1027 kg, which is somewhat greater than that of the proton but 1,838.68 times higher than that of the electron. It has no electric charge.

Learn more about neutral atom here:

brainly.com/question/2633934

#SPJ4

The substances are the heterogeneous mixtures are : a. II and III that is  the milk of magnesia and the crude oil.

The mixture are formed when two or the more substances are mix together without taking part in the chemical change. The heterogeneous mixture is the mixture where the components throughout the solution is not uniform. The mixture are two types :

In the heterogenous mixture the particles is distributed non uniformly and it can not be separated by the physical method.

Thus, the heterogenous mixture in the given option are the milk of the magnesia and the crude oil.

To learn more about heterogenous mixture here

https://brainly.com/question/30379611

#SPJ4

We would need stock solutions of 20 ml of 1 M NaCl and 50 ml of 2 M MgCl₂ to prepare 500 mL of buffer A (100 mM NaCl and 250 mM MgCl₂).

The amount of NaCl and MgCl2 needed can be calculated using the formula for buffer concentration:

C1 × V1 + C2 × V2 = C_buffer × V_buffer

where C1 and C2 are the stock concentrations of NaCl and MgCl₂, V1 and V2 are the volumes of NaCl and MgCl₂ stock solutions needed to prepare the buffer, and C_buffer and V_buffer are the final concentration and volume of the buffer.

We know the final concentration of the buffer (100 mM NaCl and 250 mM MgCl₂) and the volume of the buffer (500 mL), so we can solve for the volumes of the stock solutions needed:

V1 = (C_buffer × V_buffer - C2 × V2) / C1

V1 = (100 × 0.5 - 250 × V2) / 1000

V2 = (C_buffer × V_buffer - C1 × V1) / C2

V2 = (100 × 0.5 - 1000 × V1) / 250

V1 = (100 × 0.5 - 250 × (100 × 0.5 - 1000 × V1) / 250) / 1000

V1 = (100 × 0.5 - 250 × 100 × 0.5 / 250 + 250 × 1000 × V1 / 250) / 1000

V1 = (100 × 0.5 - 100 × 0.5 + 1000 × V1) / 1000

V1 × 1000 = 100 × 0.5 / 1000

V1 = 100 × 0.5 / 1000

V1 = 0.05 L = 50 mL

So the volume of the stock solution of 2 M MgCl₂ is 50 ml.

V2 = (100 × 0.5 - 1000 × 50 mL) / 250

V2 = (100 × 0.5 - 1000 × 0.05 L) / 250

V2 = (100 × 0.5 - 50) / 250

V2 = 0.2 L = 20 mL

So the volume of the stock solution of 1 M NaCl is 20 ml.

To learn more about stock solution visit: https://brainly.com/question/3942978

#SPJ4

The use of carbon dioxide as a blowing agent has several environmental advantages over the use of CFCs and hydrocarbons.

Carbon dioxide is a naturally occurring gas and is non-toxic, non-flammable, and non-ozone depleting. It is also more energy efficient than its alternatives, resulting in lower energy costs.

Additionally, the use of carbon dioxide as a blowing agent reduces the need for other more harmful blowing agents, helping to reduce the environmental impact of their production and use.

Learn more about environmental advantages:

https://brainly.com/question/4263986

#SPJ4

Answer:

Chalk is heavier it will sink and settle down

That would indicate that we also had 4 moles of water since 2 (moles H2O/molesNa2SO4). This implies that 4 moles of water should have produced.

To learn more about sodium sulfate refer to:

https://brainly.com/question/3047839

#SPJ1

The temperature at which ethanol distill at 1 atm (760 mm hg) would be 350K.

Distillation, also known as classical distillation, is the process of separating the components or substances from a liquid mixture via selective boiling and condensation, often inside a still. Dry distillation is the process of heating solid materials to create gaseous products (which might condense into liquids or solids); this can entail chemical changes such as destructive distillation or cracking.

Distillation can result in either an essentially complete separation (resulting in nearly pure components) or a partial separation that increases the concentration of specific components; in either case, the process takes advantage of differences in the relative volatility of the mixture's components. Distillation is a unit operation of virtually universal relevance in industrial applications, although it is a physical separation process, not a chemical reaction.

To learn more about Distillation, here

https://brainly.com/question/29037176

#SPJ4

[tex]Br_{2}[/tex] in [tex]CCl_{4}[/tex], vinyl benzene will decolorize [tex]Br_{2}[/tex] but phenol will not

There aren't any alternating double and single bonds in benzene (as Lewis structures might imply). A p-orbital on each of benzene's six carbons interacts to generate a pi bond that is delocalized around the entire ring. The delocalization would be destroyed by "adding across the multiple bond" processes, which benzene does not experience.

In fact, substitution reactions do occur with benzene. The bromine water would become discolored if benzene and bromine could react to form phenyl bromide.Any of a class of chemical reactions known as substitution reactions involves the replacement of an atom, ion, or group of atoms or ions in a molecule with a different atom, ion, or group. Depending on the kind of atom or group that serves as the substituent, substitution reactions can be categorized into three general categories. One has a substituent that is rich in electrons and supplies the electron pair needed to make a bond with the substrate (the molecule being transformed). Nucleophilic substitution is the name for this kind of reaction.

Learn more about Benzene

brainly.com/question/14525517

#SPJ4

From the given diagrams, all diagrams represent the nucleus of an atom.

The number of different elements represented by the diagrams is three elements.

The center of an atom's small, compact region made up of protons and neutrons are known as the atomic nucleus.

The nucleus contains the mass of an atom.

The sum of the number of neutrons and protons in the nucleus of an atom gives the atomic number of an atom.

When the nucleus of an atom contains the same number of protons but a different number of neutrons, the atoms are called isotopes.

Learn more about isotopes at: https://brainly.com/question/24698773

#SPJ1

There are eight atoms present in a simple cubic unit cell but only a net single atom present in it.

The simple cubic unit cell is basically the simplest repeating unit present in a simple cubic structure. Each of the corners of this simple unit cell are defined by a particular lattice point at which a particular atom, ion, or molecule can be found in the given crystal.

Each of the eight corners present in the unit cell therefore contains an identical particle. The remaining particles would be present on the edges or on the faces of the unit cell, or we can say within the body of the unit cell. There are 8 atoms but each of them only contributes to one eight of the atom and so the net atom is only 1. (8 × 1/8 = 1)

To know more about simple cubic unit cell here

https://brainly.com/question/29537966

#SPJ4

DMSO and deuterated chloroform are the most widely solvents used in NMR spectroscopy.

DMSO is the most widely used organic solvent in the NMR analysis due to its wide range of solvent constraints as well as its simple spectrum and having high boiling point. The reaction of the organic compounds with heavy water in the presence of a suitable catalyst which is used to produce deuterium solvents.

Deuterated chloroform, also called as chloroform-d, is the organic compound having formula C₂HCl₃ or CDCl₃. Deuterated chloroform is commercially available. It is easily produced and less expensive than to the deuterated dichloromethane. It is produced by the reaction of hexachloroacetone with deuterium oxide, using pyridine as a catalyst.

To know more about NMR here

https://brainly.com/question/20111886

#SPJ4

The location and light reflected on the moon throughout the month changes thanks to the moon's lunar phases :

At the beginning of the lunar cycle, the Moon is located between the Sun and the Earth, and is not visible from Earth because it is not reflecting any sunlight. As the Moon moves away from the Sun, a thin crescent shape becomes visible, and it is illuminated on the right-hand side. This phase is called the Waxing Crescent.

The Moon continues to move away from the Sun, and more than half of its surface becomes illuminated. This is called the Waxing Gibbous phase. After two weeks, the Moon is located on the opposite side of the Earth from the Sun, and its entire visible surface is illuminated. This is called the Full Moon phase.

The Moon continues to move closer to the Sun, and less than half of its surface is illuminated. This is called the Waning Crescent phase.

Find out more on the moon at https://brainly.com/question/13538936

#SPJ1

Conducting nanoparticles are strongly attracted to the electrodes because of electrostatic forces.

The nanoparticles have a net charge that is attracted to the oppositely charged electrodes. Other components of the blood, such as cells, proteins, and other molecules, are not strongly attracted to the electrodes because they are not electrically charged.

Additionally, these components can interact with the nanoparticles, either by forming physical bonds with them or by affecting their electrical properties. These interactions can also cause the components to move towards the electrodes.

Learn more about Conducting nanoparticles:

https://brainly.com/question/10400626

#SPJ4

Sunset yellow (E110) is a molecule with 11 carbon atoms and 17 hydrogen atoms.

Sunset yellow (E110) is a synthetic food dye with the chemical formula C16H10N2O7S. The number of carbon atoms in the molecule can be determined by counting the number of carbon atoms in the chemical formula. In this case, there are 16 carbon atoms in the molecule.

The number of hydrogen atoms can be estimated by using the general formula for organic compounds, which is CnH2n+2, where n is the number of carbon atoms. If we plug in n = 16 into this formula, we get C16H2(16)+2 = C16H34.

This is the theoretical number of hydrogen atoms in the molecule, but it's possible that some of these hydrogen atoms have reacted with other elements to form different chemical compounds.

To know more about atom calculation here:

https://brainly.com/question/15488332#

#SPJ11