An equilibrium constant (Keq) is a numerical expression of the ratio of the reactant concentration to the product concentration.

True
False

From the balanced equation, we can see that 13 moles of O2 are needed

Therefore, the percent yield of carbon dioxide is 84.5%.

The theoretical yield is calculated based on stoichiometric calculations from the balanced chemical equation for the reaction, using the amounts of reactants and products specified in the equation. It represents the maximum amount of product that could be obtained under ideal conditions, assuming complete conversion of all the reactants.

To know more about yield visit :

https://brainly.com/question/30700754

#SPJ1

The balanced equation shows that 13 moles of oxygen are required. 84.5%  is the percent yield of carbon dioxide

What is theoretical yield?

The maximum amount of product that can be produced in a chemical reaction based on the amount of the limiting reactant is called the theoretical yield. The amount of product actually collected, or the actual yield, is typically lower than the predicted yield in practice.

Based on stoichiometric calculations from the balanced chemical equation for the reaction, using the amounts of reactants and products indicated in the equation, the theoretical yield is determined. It reflects the greatest amount of product that might be produced under perfect circumstances, assuming that all of the reactants would completely convert.

To know more about yield visit :

brainly.com/question/30700754

#SPJ1

Answer:

Explanation:

Ultraviolet rays are the major cause of sunspots, solar flares and coronal mass ejections

The student needs 2.5 mL of the stock solution and 57.5 mL of water to make 60.0 mL of a 0.05000 M solution of iron(lll).

Solution is defined as a means of solving a problem or dealing with a difficult situation. It is a way to answer a question, handle a difficult task, or address an issue. Solutions can be found in a variety of ways, such as brainstorming, research, trial and error, and seeking the help of an expert. Solutions can be both practical and creative. Finding solutions requires critical thinking, problem solving, and communication skills.

To make 60.0 mL of a 0.05000 M solution of iron(lll) using a stock solution that is 0.2420 M in iron (lll), the student must first calculate the amount of stock solution needed to achieve the desired concentration. This can be done using the equation C1V1=C2V2, where C1 is the concentration of the stock solution (0.2420 M), V1 is the volume of the stock solution needed, C2 is the desired concentration of the final solution (0.05000 M), and V2 is the volume of the final solution (60.0 mL).

Plugging in the values, we get:

0.2420 M x V1 = 0.05000 M x 60.0 mL

V1 = 0.05000 M x 60.0 mL / 0.2420 M

V1 = 2.5 mL

To learn more about solution

https://brainly.com/question/25326161

#SPJ1

The mole ratio of the CO2 to LiOH is 1:2

The mole ratio is 1:2.

If 1 mole of CO2 reacts with 2 moles of LiOH

x moles of CO2 will react with 12.5 moles of LiOH

x = 6.25 moles

If 2 moles of LiOH produces 1 mole of water

12.5 moles of LiOH will produce 12.5 * 1/2

= 6.25 moles of water

Mole ratio of water to calcium carbide is 2:1

Number of moles of CaC2 = 27 g/64 g/mol

= 0.42 moles

1 mole of CaC2 reacts with 2 moles of H2O

0.42 moles of CaC2 reacts with 0.42 * 2/1

= 0.84 moles

If 1 mole of CaC2 lead to the formation of 1 mole of C2H2

Then 0.42 moles of C2H2 is formed

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

The given statement " The reaction 2NaOH(s) —> Na₂O(s) + H₂O(g) is a combustion reaction is false as it is the decomposition reaction.

The decomposition reaction can be explained as the chemical reaction in which the one reactant will breaks down into the two or the more products. The Decomposition reaction is the processes in the reaction the chemical species will break into the simpler parts. the, decomposition reactions require the energy input.

The general representation of the equation of the decomposition reaction is as :

AB → A + B.

The chemical equation is :

2NaOH(s) —> Na₂O(s) + H₂O(g)

This is called as the decomposition reaction.

To learn more about decomposition reaction here

https://brainly.com/question/16987748

#SPJ1

The P value denotes the likelihood, for a certain statistical model, that the statistical summary would be equal to or more extreme than the actual observed results if the null hypothesis were true.

When the null hypothesis is assumed to be true, a p-value calculates the likelihood of getting the observed results. The statistical significance of the observed difference is greater the lower the p-value. P-value can be used for hypothesis testing instead of—or in addition to—pre-selected confidence levels.

The computed P value may change depending on a variety of study design factors. These factors include inaccuracy, sample size, and the strength of the link. These components all have the potential to undermine research either singly or collectively.

To learn more about p-value visit:

brainly.com/question/14790912

#SPJ1

Which of the following are true statements about the p-value and hypothesis tests? Select all that apply. Select one or more:

A) The p-value is the probability the null hypothesis is correct.

B) The p-value is the probability the alternative hypothesis is correct.

C) The p-value is 1 - (the probability the alternative hypothesis is correct)

D) If the p-value is large it indicates we did not calculate the test statistic correctly.

E) The p-value is calculated assuming the null hypothesis is true.

F) The p-value is calculated assuming the alternative hypothesis is true.

For the chemical elements Cl, Am, Lu, Ca, Hg, I, Ti, and Mg, the final occupied sublevels are the 4s orbital for Cl, the 5f orbital for Am, the 7s orbital for Lu, the 3p orbital for Ca, the 6s orbital for Hg, the 5p orbital for I, the 4f orbital for Ti, and the 3s orbital for Mg.

The primary quantum number, n, of an element determines the sublevel of that element. greater numbers correspond to greater energy levels for the electron, which is indicated by this number.

The form of the orbital is determined by the angular momentum quantum number, l. The p orbital has a form, the d orbital has a clover shape, the f orbital is complicated, and the s orbital is spherical. the final level that was inhabited.

Learn more about  orbital  at:

https://brainly.com/question/18914648

#SPJ1

Answer:

point B

Explanation:

as you may see that's where the two color lines meet and there only

The electrode potential of the cell that we have here is 2.85 V

Redox potential, electrode potential, and reduction potential are all terms used to describe the ability of a chemical species to gain electrons and proceed through reduction. The potential difference between an electrode in a half-reaction and a common reference electrode, typically the hydrogen electrode, is expressed in volts (V).

A species has a stronger tendency to be reduced and gain electrons the more positive the reduction potential. The direction and viability of a redox reaction can be predicted using the reduction potential.

The reduction potential of beryllium is -1.99 V

The reduction potential for Hg is +0.86 V

The Ecell = 0.86 - (-1.99)

= 2.85 V

Learn more about reduction potential:https://brainly.com/question/23881200

#SPJ1

Answer: 16 grams

Explanation:

mass = density x volume

Answer:

Acid rain is harmful for forests and other biodiversities. Due to the acid rain in these areas, it can cause the dissolving of nutrients that plants need for growth and to maintain their health, such as magnesium. Acid rain causes aluminium to release into the soil, and that causes trees to have difficulties in taking water. Drastically, it kills the land and marine life, along with insects. Acid rain even has an effect on lakes, rivers and such water bodies get poisoned.

For all three cases, we can use the fact that pH + pOH = 14 to find pOH, and then use pOH to calculate [OH−] and [H3O+].

Case 1: pH = 8.76

pOH = 14 - pH = 14 - 8.76 = 5.24

[OH−] = 10^(-pOH) = 10^(-5.24) = 5.2 × 10^(-6) M

[H3O+] = 1 × 10^(-14) / [OH−] = 1 × 10^(-14) / (5.2 × 10^(-6)) = 1.9 × 10^(-9) M

Therefore, [H3O+] = 1.9 × 10^(-9) M and [OH−] = 5.2 × 10^(-6) M.

Case 2: pH = 11.32

pOH = 14 - pH = 14 - 11.32 = 2.68

[OH−] = 10^(-pOH) = 10^(-2.68) = 2.1 × 10^(-3) M

[H3O+] = 1 × 10^(-14) / [OH−] = 1 × 10^(-14) / (2.1 × 10^(-3)) = 4.8 × 10^(-12) M

Therefore, [H3O+] = 4.8 × 10^(-12) M and [OH−] = 2.1 × 10^(-3) M.

Case 3: pH = 2.80

pOH = 14 - pH = 14 - 2.80 = 11.20

[OH−] = 10^(-pOH) = 10^(-11.20) = 6.3 × 10^(-12) M

[H3O+] = 1 × 10^(-14) / [OH−] = 1 × 10^(-14) / (6.3 × 10^(-12)) = 1.6 × 10^(-3) M

Therefore, [H3O+] = 1.6 × 10^(-3) M and [OH−] = 6.3 × 10^(-12) M.

The delocalization of the positive charge onto the oxygen atom also helps explain why the reaction is regioselective for the para position.

Oxygen is a chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group on the periodic table and is a highly reactive nonmetallic element that readily forms compounds (notably oxides) with almost all other elements. By mass, oxygen is the third-most abundant element in the universe, after hydrogen and helium.

An element is a substance composed of atoms that have the same number of protons in the atomic nucleus. Elements are characterized by their atomic number, which represents the number of protons in the nucleus. The periodic table of elements is a tabular arrangement of the chemical elements, organized on the basis of their atomic number, electron configurations, and chemical properties.

To know more about oxygen visit :

https://brainly.com/question/13370320

#SPJ1

The resulting molarity if 20.0 mL of 3.00 M ammonia solution is diluted to 200 mL is 0.3M (option D).

Molarity is the concentration of a substance in solution, expressed as the number of moles of solute per litre of solution.

The molarity of a diluted solution can be calculated as follows;

CaVa = CbVb

Where;

According to this question, 20.0 mL of 3.00 M ammonia solution is diluted to 200 mL. The resulting molarity can be calculated as follows;

3 × 20 = Cb × 200

60 = 200Cb

Cb = 0.3M

Learn more about molarity at: https://brainly.com/question/8732513

#SPJ1

The formula of the compound, given that it contains 30 percent N and 70 percent O by mass is NO₂

First, we shall list out the given parameters from the question. This is given

The formula of the compound can be obtained as illustrated below:

Divide by their molar mass

N = 30 / 14 = 2.14

O = 70 / 16 = 4.375

Divide by the smallest

N = 2.14 / 2.14 = 1

O = 4.375 / 2.14 = 2

Thus, we can conclude from the above calculation that the formula of the compound is NO₂

Learn more about empirical formula:

https://brainly.com/question/9459553

#SPJ1

The formula of the compound that we have is NO2

We'll start by outlining the parameters that the question has provided. This is stated.

N = 30% in terms of nitrogen percentage.

oxygen percentage (O) = 70%

Compound's formula is =?

The compound's formula can be discovered as shown below:

Based on molar mass;

N = 30 / 14 = 2.14

O = 70 / 16 = 4.375

By the smallest number;

N = 2.14 / 2.14 = 1

O = 4.375 / 2.14 = 2

Thus the formula of the compound that we have to find is NO2.

Learn more about formula:https://brainly.com/question/14044066

#SPJ1

For the reaction between zinc and hydrochloric acid, we need to know the balanced chemical equation, which is:

[tex]Zn + 2 HCl --- > ZnCl_2 + H_2[/tex]

We can conclude from this equation that when 1 mole of zinc (Zn) is mixed with 2 moles of hydrochloric acid (HCl), 1 mole of zinc chloride (ZnCl2) and 1 mole of hydrogen gas (H2) are produced . The molar mass of zinc is 65.38 g/mol, while the molar mass of zinc chloride is 136.29 g/mol.

We can determine the amount of moles of zinc using the molar mass of zinc and the given mass of zinc:

130.74 g Zn / 65.38 g/mol = 2.000 mol Zn

According to the equation, one mole of zinc reacts to form one mole of zinc chloride. Hence, 2000 moles of ZnCl2 were also produced.

Using the molar mass of ZnCl2, we can finally determine its mass:

2.000 mol ZnCl2 x 136.29 g/mol = 272.58 g ZnCl2

Thus, if 130.74 g of zinc reacts, 272.58 g of zinc chloride will be obtained.

Learn more about chemical equation, here:

https://brainly.com/question/28294176

#SPJ1

In a basic solution, the balanced redox reaction is:

[tex]2SO3_2- + 4H_2O + 2Ag -- > 2SO4_2- + 8OH- + 2Ag[/tex]

Step 1- half-reactions for the oxidation and reduction:

Oxidation: SO32- → SO42- + e-

Reduction: Ag+ + e- → Ag

Step-2- Balance the number of electrons transferred in the two half-reactions by multiplying the oxidation half-reaction by

[tex]2SO3_2- --- > 2SO4_2- + 2e-\\Ag+ + e--- > Ag[/tex]

Step-3-  balance the oxygen atoms by adding water molecules to the half-reactions;

[tex]2SO3_2- + 2H_2O--- > 2SO4_2- + 4H+ + 2e-\\Ag+ + e- -- > Ag[/tex]

step 4-  balance the hydrogen atoms by adding hydroxide ions to the half-reaction that needs it (in this case, the oxidation half-reaction);

2SO32- + 4H2O → 2SO42- + 8OH- + 2e-

Ag+ + e- → Ag

Step-5 multiply the reduction half-reaction by 2 and add

[tex]2SO3_2- + 4H_2O ----- > 2SO4_2- + 8OH- + 2e-\\2Ag+ + 2e- ---- > 2Ag\\2SO3_2- + 4H_2O + 2Ag+ ---- > 2SO4_2- + 8OH- + 2Ag[/tex]

to know more about redox reactions here:

brainly.com/question/13293425

#SPJ1

The correct answer is that Q is a weaker acid than P

Due to the fact that stronger acids have a tendency to react with metals like magnesium more quickly, acid P is probably stronger than acid Q.

In comparison to acid Q, acid P would produce more hydrogen gas in a smaller amount of time due to its higher reaction rate.

Statement C, however,  is true that acid Q is a weaker acid than acid P, which would also contribute to the slower reaction rate and smaller volume of hydrogen gas produced.

Learn more about strong acid:https://brainly.com/question/31143763

#SPJ1

Answer:

The correct answer to your question is 4.54 mols.

The rate law for the given reaction is: B) Rate: K[X] [Y]²[Z]

This can be determined by analyzing the experimental results and observing how changes in the concentration of each reactant affect the rate of the reaction. The rate law expresses the relationship between the concentration of reactants and the rate of the reaction.

Option D is not a valid rate law since it has an exponent of 2 on the rate constant, which is not a common practice in writing rate laws. Option A has an exponent of 2 on Z, but the experimental data does not support this relationship, so it can be ruled out. Option C has an exponent of 1 on Z, but the experimental data suggests that Z is not a significant factor in determining the rate of the reaction.

Therefore, option B is the correct rate law for this reaction based on the given experimental data.

To learn more about rate law here

https://brainly.com/question/4222261

#SPJ1

1. The temperature, given that you have 4 moles of the gas at a pressure of 5.6 atm is -68.4 °C

2. The number of mole of the gas you have, given that the pressure is 1.20 atm is 1.26 mole

The temperature of the gas can be obtain as follow:

PV = nRT

Inputting the given parameters, we can obtain the temperature of the gas as follow:

5.6 × 12 = 4 × 0.0821 × T

67.2 = 0.3284 × T

Divide both sides by 0.3284

T = 67.2 / 0.3284

T = 204.6 K

Subtract 273 to obtain answer in °C

T = 204.6 - 273 K

T = -68.4 °C

Thus, the temperature is -68.4 °C

We shall begin by listing out the given parameters from the question. This is shown below:

Ideal gas equation is written as follow:

PV = nRT

Inputting the given parameters, we can obtain the number of mole of the gas as follow:

1.2 × 31 = n × 0.0821 × 360

Divide both sides by (0.0821 × 360)

n = (1.2 × 31) / (0.0821 × 360)

n = 1.26 mole

Thus, we can conclude that the number of mole of the gas is 1.26 mole

Learn more about number of mole:

https://brainly.com/question/29927685

#SPJ1

Complete question:

See attached photo

The moles of [tex]C_{12}H_{22}O_{11}[/tex] are 0.026 and atoms of [tex]C_{12}H_{22}O_{11}[/tex] are [tex]0.156572*10^{23}[/tex] when sample of  2 tsp of sugar (C12H22011) weighs 9.00 g.

The molecular mass of [tex]C_{12}H_{22}O_{11}[/tex] is 342.3 g/mol

Moles= grams / molecular mass

Moles= [tex]\frac{9}{342.3 }[/tex]

Moles = 0.026

[tex]Number of atoms= moles * 6.022*10^{23}[/tex]

[tex]Number of atoms= 0.026*6.022*10^{23}[/tex]

[tex]Number of atoms= 0.156572*10^{23}[/tex]

The number of atoms, molecules, or ions that make up one mole of a substance is 6.022 1023.

Avogadro's number or Avogadro's constant are both designations for the number 6.022 1023. You can change between mass and the number of particles using the mole idea.

The proportionality factor that connects the number of constituent particles in a sample with the amount of substance in that sample is known as the Avogadro constant, also known as NA or L.

For more information on moles kindly visit to

https://brainly.com/question/20486415

#SPJ1

The theoretical yield of water is 1.35 g.

What is Theoretical Yield?

Theoretical yield refers to the maximum amount of product that can be produced from a given amount of reactants, assuming that the reaction proceeds to completion, all reactants are used up, and no product is lost during the reaction. It is a calculated value based on the stoichiometry of the reaction and the amount of limiting reagent present.

The balanced chemical equation for the reaction is:

HCl + NaOH → NaCl + H2O

The molar mass of HCl is 36.46 g/mol, and the molar mass of NaOH is 40.00 g/mol.

Using stoichiometry, we can calculate the amount of water produced from the given amounts of HCl and NaOH:

1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of water.

Number of moles of HCl = 3.3 g / 36.46 g/mol = 0.0904 mol

Number of moles of NaOH = 3.0 g / 40.00 g/mol = 0.0750 mol

From the balanced equation, we see that the number of moles of water produced is equal to the number of moles of NaOH used, which is 0.0750 mol.

Mass of water = number of moles of water x molar mass of water

Mass of water = 0.0750 mol x 18.02 g/mol = 1.35 g

Therefore, the theoretical yield of water is 1.35 g.

Learn more about Theoretical Yield

https://brainly.com/question/25996347

#SPJ1

The electronic configuration of the chlorine atom can be written as 2, 8 , 7

The positioning of electrons within an atom's or molecule's orbitals is referred to as its electronic configuration. Around the atomic nucleus of an atom, electrons—negatively charged subatomic particles—occupy various energy levels or shells.

The electrons in an atom fill these energy levels or shells in a certain order in accordance with a series of laws known as the Aufbau principle, Pauli exclusion principle, and Hund's rule. Each energy level or shell has a maximum capacity for electrons.

Learn more about electron configuration:https://brainly.com/question/29757010

#SPJ1

Answer:

mark me brilliant

To determine the mass of ammonia that can be produced from 40.5 g of N₂, we need to use stoichiometry and the balanced chemical equation provided.

From the balanced equation, we can see that 1 mole of N₂ reacts with 3 moles of H₂ to produce 2 moles of NH₃. Therefore, we need to calculate the number of moles of N₂ in 40.5 g:

Number of moles of N₂ = mass / molar mass = 40.5 g / 28 g/mol = 1.4464 mol N₂

Using the mole ratio from the balanced equation, we can calculate the number of moles of NH₃ produced:

Number of moles of NH₃ = (1.4464 mol N₂) x (2 mol NH₃ / 1 mol N₂) = 2.8928 mol NH₃

Finally, we can use the molar mass of NH₃ to convert the number of moles to mass:

Mass of NH₃ = number of moles x molar mass = 2.8928 mol x 17 g/mol = 49.11 g

Therefore, the mass of ammonia that can be produced from 40.5 g of N₂ with excess H₂ is 49.11 g.

Answer:

Explanation:

The first step is to determine the limiting reactant. In this case, we have 40.5 g of N₂ and excess H₂. We can use the molar mass of each substance to determine the number of moles of each reactant:

N₂: 40.5 g / 28.01 g/mol = 1.45 mol

H₂: 40.5 g / 2.016 g/mol = 20.1 mol

Since we have less moles of N₂ than H₂, N₂ is the limiting reactant. This means that the amount of ammonia produced will be determined by the amount of N₂.

We can use the balanced equation to determine the mass of ammonia produced:

1 mol N₂ → 2 mol NH₃

1.45 mol N₂ → 2.90 mol NH₃

2.90 mol NH₃ * 17.03 g/mol = 50.4 g NH₃

Therefore, 50.4 g of ammonia can be produced from 40.5 g of N₂ with excess H₂.

Answer:

2.1x10^ -5m

Explanation:

this is the final answer

The heat released is 439.5 J during the reaction.

The heat released can be calculated using the formula:

where q is the heat released, m is the mass of the solution, C is the specific heat of water, and ΔT is the change in temperature.

First, we need to calculate the total mass of the solution:

The density of water is 1 g/mL, so the mass of the solution is 35 g.

Next, we can calculate the change in temperature:

Finally, we can substitute these values into the formula:

Therefore, 439.5 J of heat was released during the reaction.

To learn more about calorimeter, here

https://brainly.com/question/4802333

#SPJ1

pKw is the acid dissociation constant for water, which is equal to 14. pKa is the acid dissociation constant for a particular acid, and pKb is the base dissociation constant for a particular base.

Acid is a chemical compound that has a sour taste, produces a corrosive or acidic reaction when in contact with certain metals, and has a pH below 7. Acids are found in nature, and are used in a variety of industries for a range of purposes. Acids can be generally classified into two categories: organic and inorganic. Organic acids are produced by living organisms and are found in foods such as citrus fruits; inorganic acids are not produced by living organisms, and are found in nature or created in laboratories. In chemical terms, acids are compounds that donate protons, or hydrogen ions, to other compounds. Common examples of acids include hydrochloric acid, sulfuric acid, and acetic acid.

Both pKa and pKb can be used to calculate the acidity or basicity of a given compound.

To learn more about acid

https://brainly.com/question/25148363

#SPJ1

Aqueous hydrochloric acid (HCl) reacts with solid sodium hydroxide (NaOH) to produce aqueous sodium chloride (NaCl) and liquid water (H₂O). If 4.92g of water is produced from the reaction of 35.4g of hydrochloric acid and 16.3g of sodium hydroxide, the percent yield of water is 15.4%.

Percent yield is a measure of how efficiently a reaction converts the reactants into the desired product. It is calculated by dividing the amount of product you actually obtain in a reaction by the maximum amount of product that theoretically could be produced with the given reactants. The result of this calculation is then expressed as a percentage. For example, if a reaction made 1 gram of product but the maximum amount of product that could be made was 2 grams, the percent yield would be 50%.

Percent yield = [tex]\frac{actual yield}{theoretical yield}[/tex]  x 100

Theoretical yield of water can be calculated using the equation:

HCl + NaOH → NaCl + H₂O;

mol HCl = [tex]\frac{35.4}{36.5}[/tex] = 0.968

mol NaOH = [tex]\frac{16.3}{40}[/tex] = 0.408 mol NaOH

mol H₂O = (mol HCl + mol NaOH) × 2 = 1.784 mol H₂O

Theoretical yield of water (g) = 1.784 × 18 = 32.1g

Actual yield of water (g) = 4.92g

Percent yield of water =[tex]\frac{4.92}{32.1}[/tex] x 100 = 15.4% (rounded to one significant figure)

The percent yield of water is 15.4%.

To know more about percent yield, visit:

https://brainly.com/question/2506978

#SPJ1

The percent transmittance of the solution at a wavelength of 460 nm is 29.7%.

The wavelength is the separation between two wave peaks or troughs. It is a fundamental concept in physics and is often used to describe the properties of electromagnetic waves, such as light, radio waves, and X-rays.

The following equation describes the relationship between absorbance and % transmittance:

                                    Absorbance = - log10(Transmittance)

Therefore, you can rewrite the equation as follows to determine a solution's percent transmittance:

Transmittance = 10^(-Absorbance)

At a wavelength of 460 nm, the absorbance value in this instance is 0.518. Consequently, the % transmittance can be determined as follows:

                     Transmittance = 10⁻⁰.⁵¹⁸

                           Transmittance = 0.297

By multiplying by 100, you may express the transmittance as a percentage:

Percent Transmittance = 0.297 x 100

Percent Transmittance = 29.7%

Therefore, the percent transmittance of the solution at a wavelength of 460 nm is 29.7%.

Learn more about Wavelength :

brainly.com/question/28995449

#SPJ1