An object attached to an ideal spring executes simple harmonic motion. If you want to double its total energy, you could?.

The direction should approach the helicopter is the downhill side.

The Federal Communications Commission controls and regulates all interstate and international radio television wire satellite and cable communications within the United States. Typically the helicopter is approached from the front or sometimes from the side, within the pilot's line of sight. Never approach from behind. Never approach a downhill helicopter. Main he could step into the rotor.

Choose your way to the machine on level ground or uphill. Always approach helicopters from the downhill side. Rotor separation is greatly affected by slopes. To avoid the main rotor and other components of the described communication system taking off by approaching the sloping side of the sloping landing site.

Learn more about machine here:-https://brainly.com/question/3617034

#SPJ4

The change in the kinetic energy of this object is 600 J, when an object of mass 10 kg is initially at rest, and 100 N force cause it move horizontally at a distance of 6 m.

Mass of the object = 10kg

Force = 100N

Distance = 6m

Change in kinetic energy of this object =Δ KE

Expression for the change in the kinetic can be given as follows:

Δ Kinetic Energy = W

,W is the workdone on the object.

This is given by the formula below,

W= F *d

Hence,

Δ KE = F × d

Δ K.E= (100N × 6m)

Δ K.E. = 600Nm

Δ K.E. = 600 Joule

Learn more about Kinetic energy:

https://brainly.com/question/26472013

#SPJ4

The pressure in the gas at that point is equal to the initial pressure, 100 kPa.

To expand adiabatically, there must be no heat transfer involved. Adiabatic expansion means that no heat is transferred between the gas and its surroundings; this means that if we double the volume of our gas, nothing should change in terms of temperature as long as there is no heat transfer to or from our system during expansion.

Since we're starting out with a monatomic ideal gas, we know that its entropy is going to stay constant throughout this process, so the ideal gas law gives us a relationship between pressure, volume, and temperature: PV = nRT

To learn more about pressure visit: https://brainly.com/question/12971272

#SPJ4

The speed of the roller coaster when it comes at the top of the second hill is 17.32 m/s.

The mass of the roller coaster is 500 kg and it is travelling with a speed of 10m/s.

Firstly the roller coaster ride pass a height of 20 m and after that it goes down and then climb till height of 10 m.

It has been know that throughout the motion the total mechanical energy is always conserved.

So we can write,

Potential energy at the top of the 20 m + kinetic energy at the top of 20 m hill = potential energy at the top of 10 m hill + kinetic energy at the top of 10m hill.

MgH + 1/2MV² = Mgh + 1/2Mv²

H is 20m and h is 10m, while M is mass of roller coaster and V is the speed at top of 20m hill and v is the speed at top of 10m hill.

Putting all values,

g(H-h) = 1/2(v²-V²)

10×10 = 1/2(v²-100)

v = 17.32 m/s.

So, the speed of the roller coaster at the top of 10m hill is 17.32 m/s.

To know more about mechanical energy, visit,

https://brainly.com/question/24443465

#SPJ4

Answer:

sound wave's amplitude relates to the change in pressure caused by the wave measured at a specific location. The sound is perceived as louder if the amplitude increases, and softer if the amplitude decreases.

answer each problem with only one note

The new acceleration would be 5.62162m/s²

Given - acceleration a=8m/s²

As per question force = F/3.7

and mass = m/2.6

To find :- new acceleration α°

Formula: F=ma

Calculation : F/3.7= [mα°]/2.6

Divide these 2 equations

2.6= 3.7(α°/a)

α°= 2.6 x 8 / 3.7

α°=5.62162m/s²

To learn more about acceleration-

https://brainly.com/question/9194964

#SPJ1

As a result of the collision, the cart, which had a velocity of 1, comes to rest. The cart then accelerates with velocity v1 from rest. assuming that a moving cart collision elastically with a stationary cart.

We are aware that both the linear momentum and the kinetic energy are conserved in completely elastic velocity. However, only the kinetic energy of an inelastic impact is conserved. Any situation in which two or more bodies quickly exert forces on one other is referred to be a collision. The scientific definition of the word "collision" makes no reference to the magnitude of the force involved, despite the fact that the most frequent usage of the word relates to instances in which two or more objects clash violently.

The instantaneous speed could be compared to the speed shown by the speedometer.

Learn more about collision here

https://brainly.com/question/4322828

#SPJ4

.

The key observation enabled Edwin Hubble to prove this by observing individual Cepheid variable stars in Andromeda and applying the period-luminosity relation.

American astronomer Edwin Powell Hubble lived from November 20, 1889, through September 28, 1953. He was a significant contributor to the development of observational cosmology and extragalactic astronomy.

Hubble established that many objects formerly believed to be "nebulae" or clouds of gas and dust, were actually galaxies outside the Milky Way. He scaled galactic and extragalactic distances using the strong direct correlation between a classical Cepheid variable's luminosity and pulsation time, which was found in 1908 by Henrietta Swan Leavitt.

To learn more about Edwin Hubble, visit the link below:

brainly.com/question/14102914

#SPJ4

The minimum magnitude of the force f is 21 N needed to cause the movement of a 5 kg box pulled by a horizontal force.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

With a negative acceleration, the skateboard's beginning velocity will be higher than its end velocity.

The correcty answer is 1

Based on the assumption that the object's energy is conserved, its velocity equals the square root of twice square product of the its acceleration or the distance it travels. This relationship also depends on the object's initial velocity.

When gravity first exerts force on an object, its initial velocity indicates how quickly it moves. The final velocity, on the other hand, is a vector quantity that determines the rate and direction of the a moving body when it has reached its maximum velocity.

To know more about initial velocity visit:

https://brainly.com/question/9163788

#SPJ13

Answer:

Light can travel through a glass or through a vacuum

Since the meter's 3V terminals are connected to the circuit, we have to read the "zero-to-3" scale on the meter to get our measurement.  That's the scale under the marks.

On that scale, the needle points to  1.4 DC Volts.  That's the potential difference between the two points the meter probes are touching.

Answer:

The answer is 9.32x10^(-6) T.

Explanation:

The formula of finding magnetic field in a long solenoid is (B)= (MU)X N X I/L.

MU=4*(PI)*10^-7 h/m

n=1255

i=4.2 A

l=0.71 m

b= 9.32*10^(-6) T.

Learn more about magnetic field in a solenoid here https://brainly.com/question/3821492

#SPJ4

When plates commute in the exact direction it collides, and the plates move to other at convergent boundaries.

The lighter, dense, and much more elastic oceanic plate dips underneath the thicker, more stiff continental plate whenever a continental plate encounters a marine plate.

It's known as subduction. Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction.

The continent's undercut rocks start to melt. On occasions, a chain of eruptions forms as the hot magma rises to the surface and travels through the continent.

Nearly 80% of earthquakes happen along convergent borders when plates are being pushed together.

Destruction, when two continental plates crashes, is just another kind of convergent boundary. The plates collapse and are propelled upward since neither is heavier compared to the other.

Read more about convergent boundaries here

https://brainly.com/question/28002759

The work done by the child on the wagon is 158.4 J

Work done is defined as the product of the force applied on the object and the component of distance traveled by the object in the direction of the force. Mathematically,

W = FdCosθ

where,

W = work done = ?

F = force applied = 16 N

d = displacement = 10 m

θ = angle of inclination = 25°

Therefore,

W = (16 N) (10 m)Cos(25°)

W = 158.4 J

Hence, work done by the child on the wagon is 158.4 J

Learn more about Work here:

https://brainly.com/question/25573309

#SPJ4

The work done by friction when a crate of 263 kg slides 3.2 m is 1072.2 J.

Friction is the force that opposes the motion of two bodies in contact.

To calculate the work done by friction, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the work done by friction is 1072.2 J.

Learn more about friction here: https://brainly.com/question/23161460

#SPJ1

The time taken by the ball is 0.30s.

We know that the horizontal velocity has to do with the speed of the object has it moves along a horizontal path. In this case, we can see that the ball is thrown horizontally with a velocity of 12m / s. We have also been told in this question as we have it here to assume that there was no air resistance that is involved.

Thus we have;

Horizontal speed of the ball =  12m / s

Distance covered by the ball =  3.5 m

Let us see that;

V = s/t

V = speed

s = distance

t = time

t = s/V

We should now have;

t = 3.5 m/12 m/s

t = 0.30s

We can now see that the time that t would take the ball to hit the ground is 0.30 seconds of time.

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

Answer:

Explanation:

Given:

Vₓ = 12 m/s

H = 3.5 m

g = 9.8 m/s²

__________

t - ?

According to the principle of independence of motion, we find the fall time from the formula:

H = g·t²/ 2

t = √ (2·H / g)

t = √ (2·3.5 / 9.8 ) ≈ 0.85 s

Correct answer:

C.  0.85 s

We are given with a case of a moving shopping cart.

We are asked , how to increase the time, change the force.

For that, if we reduce the applied force in order to increase the time interval.

Generally, if we know the force applied and time taken, we can calculate the change in momentum.

As, Force, F = dP/dt

i.e. Rate of change of momentum w.r.t. time is Force.

So, dP = F.dt

Unit of Force is Newton, N in MKS (metre kilogram second) system.

Unit of Force is Dyne in CGS (centimetre gram second) system.

To know more about Force:

brainly.com/question/13191643

#SPJ4

At 7.1 Hz a 200-turn, flat coil of cross sectional area of 300.0 cm2 be rotated in a uniform 30.0-mt magnetic field to have a maximum value of the induced emf equal to 8.0 v

An electric charge, an electric current, and magnetic materials are all affected magnetically by a magnetic field, which is a vector field. A force perpendicular to the magnetic field and its own velocity acts on a moving charge in a magnetic field.

Given,

number of turns is N = 200 turns

cross-sectional area is A = 300 cm² = 300 x 10⁻⁴ m²

the magnitude of magnetic field strength is B = 30 x 10⁻³ T

the maximum value of the induced emf is E = 8 V

Now,

Maximum induced emf is, E = NBAω

where,

ω is the angular velocity (ω = 2πf)

Now,

E = NBA2πf

where,

f is minimum frequency

So, f = E / (NBA2π)

f = 8 / (200 x 30 x 10⁻³  x 300 x 10⁻⁴ x 2 x 3.142)

f = 7.073 Hz

f = 7.1 Hz

∴ the minimum frequency of the coil is 7.1 Hz.

To know more about magnetic field, visit:

https://brainly.com/question/23096032

#SPJ4

The speed of the cars just after the collision is 0.875 m/s.the formula to be used  m1u1 + m2u2 = m1v1 + m2v2.V=14000*1.5÷14000+1000=0.875m/s

Teenagers, young adults, and the others take the stimulant drug "speed" to feel more focused and alert, as well as, in some circumstances, to get high. Several types of speed are also used by some people to suppress their appetite.

Simply because they are not paying attention on their driving pace, drivers frequently go above the speed limit. Traffic flow, operating a powerful car, and listening to music were all mentioned as contributing factors. Some drivers claimed that passengers' distraction caused them to accelerate.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ4

4.80m is the far of the recipients must goods dropped.

The speed of an object is the rate at which it moves through space. A slow-moving object travels a relatively short distance in a given amount of time, whereas a fast-moving object travels a long distance in a short amount of time.

A)Since we are aware that the plane's vertical speed is zero

In this instance, the mass is dropped with no beginning speed.

thus, we will

y=1/2gt²

235=1/2(9.81)t²

t=6.92s

Consequently, it is given as the horizontal distance it moved.

d=vt

d=(69.4)(6.92)

d=480.4m

To learn more about speed refer to:

https://brainly.com/question/13943409

#SPJ4

The material that is attracted to the electron which is negatively charged and the material from which the electron was lost is considered as positively charged that makes the Mechanism of Static Electricity.

Static Buildup apparatus. The static build up is the phenomenon in which electric charges are traded between the surfaces of two objects that come into contact with each other. In this procedure, one object static takes on a positive charge and the other a negative charge. The material that interested the electron is negatively charged and the material from which the electron was lost is positively charged. This is the appliance for the Generation of Static Electricity. Static electricity is the result of a disparity between negative and positive charges in an object.

So we can conclude that Static electricity is an variance of electric charges within or on the surface of a material or between materials.

Learn more about Static Electricity here: https://brainly.com/question/821085

#SPJ1

3.74 m/s is  the speed of the cart of mass 2.0 kg and the string gives a centripetal force of 40. N.

The force that creates centripetal acceleration is known as centripetal force. All objects in uniform circular motion accelerate toward the center of the circle, and as a result, they must likewise experience a force from the center. The centripetal force is that force.

Briefing :

Given ,The mass of the cart, m = 2 kg,

The standard equation would be F = ma , where a is acceleration, f is force, and m is mass. However, the breaking strength of the string is 40 N.

a   =    [tex]\frac{v^{2} }{r}[/tex]

F   =   ma

F   =   [tex]\frac{mv^{2} }{r}[/tex]

40 =   [tex]\frac{2v^{2} }{0.70}[/tex]

[tex]v^{2}[/tex]  =   14

v   =  [tex]\sqrt{14}[/tex]

v  =  3.74 m/s

Therefore , the speed of the cart is 3.74 m/s .

To know more about centripetal force visit :

https://brainly.com/question/14021112

#SPJ1

The force that results in a material's deformation and subsequent reduction in volume is known as compression stress.

To learn more about compression  refer to:

https://brainly.com/question/4024127

#SPJ4

If you launch a cannon at 15 degrees above horizontal, and another cannon at 75 degrees above horizontal, both will have same horizontal range

In a projectile motion , horizontal range can be calculated using formula

Range = [tex]u^{2}[/tex] sin ( 2 theta) / g

where

u = initial velocity

theta = angle along the horizontal

g = acceleration due to gravity

if we substitute the value of 15 and 75 in formula , we get

sin ( 2 * theta_1 ) = sin ( 2*15 ) = sin 30 = 1/2

sin ( 2* theta_2 ) = sin ( 2 * 75 ) = sin (150) = 1/2

both the values are coming out to be equal

hence , will have equal value of horizontal range

To learn more about projectile here :

https://brainly.com/question/13388411

#SPJ4

The velocity of the fluid where the pipe is narrow s 46.36m/s.

The diameter of the larger end of the constriction pipe is 6.5 cm and the diameter of the narrow end of the pipe is 2.7cm.

According to equation of continuity, the volume of the fluid incoming is equal to the volume of the fluid outgoing.

So, we can write,

A₁V₁ = A₂V₂

A₁ and V₁ are the area and speed at the larger end and A₂ and V₂ are area and speed at the narrow end.

Putting values,

π(6.5/2)².8 = π(2.7/2)².V

V = 46.36m/s

The velocity of the fluid where the pipe is narrow is 46.36m/s.

To know more about equation of continuity, visit,

https://brainly.com/question/28529290

#SPJ4

One of the brightest nebulae in the night sky, the Orion Nebula may be seen with the unaided eye. The Trapezium is a young open cluster of four main stars in this magnitude 4 interstellar cloud of ionized atomic hydrogen.

To learn more about Orion nebula refer to:

https://brainly.com/question/15575332

#SPJ4

Its length is 6.6m.

Length contraction is a phenomena where a moving object's length is measured to be less than it actually is.

When an object is travelling faster than the viewer, but not at the speed of light, length contraction is seen. The relativity of space and time is the cause of this. The two extremes of a moving object will send out signals like light at somewhat different intervals to an observer watching the thing.

Using the relationship between length contraction,

l = l₀[tex]\sqrt{1-\beta^{2} }[/tex]

β = v/c

l₀ = 10m

v = 0.75c

v/c = 0.75

In place of, we have

l = 10×[tex]\sqrt{1-0.75^{2} }[/tex]

l = 10× 0.66

l = 6.6m.

To know more about length contraction visit:

https://brainly.com/question/17193574

#SPJ4

The resistivity rho of the piece of the wire will be 1.60 × 10⁻⁸ Ωm. So, the material is copper wire.

Copper is the electrical conductor in many categories of electrical wiring. Copper wire is used in power generation, power transmission, power distribution for telecommunications, electronics circuitry, and countless types of electrical equipment.

The resistivity of a material is the resistance of a wire of that material of unit length and unit area of cross-section. Its S.I. unit is ohm-metre.

Learn more about resistivity here:- https://brainly.com/question/17046295

#SPJ4