Correct answer is options b. An object is lifted to a certain height and then dropped. During the drop, kinetic energy is increased.
As the object is lifted to a certain height, its potential energy is increased due to its position in the Earth's gravitational field. When the object is dropped, it begins to move downward and its potential energy is gradually converted into kinetic energy, which is the energy of motion.
Therefore, the kinetic energy of the object is increasing during the drop.
However, the total mechanical energy of the object (which is the sum of its kinetic and potential energy) remains constant as long as there is no external work done on the system (i.e. no air resistance or friction).
This is known as the law of conservation of mechanical energy. Therefore, the total mechanical energy of the object is not increased during the drop.
So, the correct answer is (b) kinetic energy.
Learn more about Kinetic Energy at
brainly.com/question/15764612
#SPJ1
Calculate the pH of aqueous solutions having the following ion concentrations at 298 K [H+1 = 0.0055M
The pH of the given aqueous solution with [H+] = 0.0055 M at 298 K is approximately 2.26.
The formula used to find the pH of the solution is given as,
pH = -log[H+]
Substituting [H+] = 0.0055 M into the above formula, we get,
pH = -log(0.0055) ≈ 2.26
Therefore, the pH of the given aqueous solution with [H+] = 0.0055 M at 298 K is around 2.26.
A solution's acidity or basicity is determined by its pH. It is described as the hydrogen ion concentration's negative logarithm, pH = -log(H+). It is commonly expressed as [H+] and measured in units of moles per litre (M).
To know more about pH value, visit,
https://brainly.com/question/26424076
#SPJ1
What are the concentrations of H3O+ and OH− in oranges that have a pH of 3.94 ?
The concentration of [tex]H_3O^+[/tex] and [tex]OH^-[/tex] in orange comes to be 1.15 * [tex]10^{-4[/tex] and 8.7 * [tex]10^{-11[/tex] respectively if the pH of the orange is given as 3.94
pH refers to the scale which is used in the measurement of the acidity and basicity of the given solution.
The pH is calculated by taking the negative logarithm of the concentration of Hydrogen ion
pH = - log[H]
3.94 = - log[[tex]H_3O^+[/tex]]
To calculate the concentration then we take the negative anti-logarithm of the pH.
[tex]H_3O^+[/tex] = 1.15 * [tex]10^{-4[/tex]
p[tex]K_w[/tex] = pH + pOH
p[tex]K_w[/tex] = 14
14 = 3.94 + pOH
pOH = 10.06
The pOH is calculated by taking the negative logarithm of the concentration of the Hydroxide ion
10.06 = - log[OH]
To calculate the concentration then we take the negative anti-logarithm of the pOH.
OH = 8.7 * [tex]10^{-11[/tex]
Learn more about pH:
https://brainly.com/question/26424076
#SPJ1
Write the empirical formula of at least four binary ionic compounds that could be formed form the following ions: Fe2+,Au3+, Cl-,O2-
To write the empirical formula of a binary ionic compound. Here are four possible binary ionic compounds that could be formed from the given ions:
Iron (II) chloride: [tex]FeCl_2 (Fe_2+ and\ 2 Cl-)[/tex]
Iron (II) oxide: FeO[tex](Fe_2+ and O_2-)[/tex]
Gold (III) chloride: [tex]AuCl_3[/tex] ([tex]Au_3[/tex]+ and 3 Cl-)
Gold (III) oxide: [tex]Au_2O_3[/tex] (2 [tex]Au_3[/tex]+ and 3 O2-)
We need to balance the charges of the cation and anion by using the lowest possible whole-number ratio of the ions. The charges of the cation and anion in each combination equal zero. The empirical formulas depict each compound's simplest whole number ion ratio. In each compound, the charges of the cation and anion balance out to zero. These formulas represent the simplest whole-number ratio of ions in each compound.
To know more about Gold (III) chloride, here
brainly.com/question/16866025
#SPJ1
someone please help will give extra brainlist
Winslow Homer and the Drama of Thermodynamics.” American Art 15, no. 1 (2001): 11–33.
QUESTIONS: 1. What is the author's thesis?
2. What is the context (culture, historical, and social background) of the work of art?
3. What is the content (subject) of the work of art?
1. The author's main contention is that Winslow Homer's artwork displays his concern with the dramatic nature of thermodynamics, a prevailing scientific idea at the time.
2. The late 19th century in America, when the country was undergoing rapid industrialization and scientific development, serves as the setting for the artwork. A famous and influential scientific theory that investigated the laws of energy and heat transfer was thermodynamics.
3. The representation of energy and motion is a central theme of art in many contexts. Homer often used natural landscapes such as waterfalls, storms, and ocean waves in his illustrations to illustrate the laws of thermodynamics.
Learn more about thermodynamics, here:
https://brainly.com/question/1368306
#SPJ1
Enhance your oven and retest it, following the same steps as when you first tested the oven. After 30 minutes, did the oven get hotter than your original design? Give reasons.
As we know that, Because improving an oven entails increasing the heat released by the oven while it is operating, it is related to the idea of endothermic and exothermic reactions in chemistry.
Exothermic reactions emit heat into their surroundings, whereas endothermic reactions absorb heat from them. After 30 minutes of operation, the oven's modifications would probably cause it to release more heat, which would change the interior temperature. By observing the flow of heat from the heating components to the interior of the oven, the performance of the improved oven can be evaluated using the laws of thermodynamics and heat transfer.
To know more about endothermic, here
brainly.com/question/29769019
#SPJ1
--The complete Question is, How does the process of enhancing an oven relate to the concept of endothermic and exothermic reactions in chemistry? Would the changes make to the oven lead to an increase or decrease in the heat released by the oven during operation, and how would this affect the temperature inside the oven after 30 minutes of use? How can the principles of thermodynamics and heat transfer be applied to analyze the performance of the enhanced oven, and what chemical reactions might be involved in the heating process? --
Estimate the latent heat of fusion for a food product with 68% moisture content
The latent heat of fusion for a food product with 68% moisture content could be between 70-150 Joules per gram (J/g).
The latent heat of fusion is a crucial factor that determines the energy required to melt a food product. The percentage of moisture content present in a food product is a key variable that can significantly affect its latent heat of fusion. However, the latent heat of fusion for such food products is not set in stone and can vary depending on several other factors as well.
The type of food product, its composition, and melting point are some of the other key aspects that can influence a food product's latent heat of fusion. Different food products may have different latent heats depending on their composition and melting point. For instance, products with high-fat content may require more energy to melt than products with low-fat content. Similarly, if a food product has a low melting point, it may require less energy to melt.
Learn more about latent heat of fusion at
https://brainly.com/question/30762921
#SPJ1
The materials and procedures are listed in your virtual lab. You do not need to repeat them here. Please clearly define the dependent and independent variables of the experiment.
Independent
Variable:
Dependent
Variable:
The independent variable in the experiment is the temperature of the hydrochloric acid, which is controlled and manipulated by the experimenter.
Different temperatures are tested to observe the effect on the rate of reaction. The dependent variable is the rate of reaction between magnesium and hydrochloric acid, which is the variable that is measured or observed as a result of changing the temperature. The reaction rate can be measured by monitoring the production of hydrogen gas, the disappearance of magnesium, or changes in the temperature of the reaction mixture. The independent variable is the temperature of the hydrochloric acid, and the dependent variable is the rate of reaction between magnesium and hydrochloric acid.
To know more about hydrochloric acid, here
brainly.com/question/15231576
#SPJ1
--The complete Question is, In an experiment to investigate the effect of temperature on the rate of reaction between magnesium and hydrochloric acid, what is the independent variable and what is the dependent variable? --
How many liters of hydrogen, measured at STP, would be needed to produce 88.5 grams of ammonia NH3?
174.72 liters of hydrogen, measured at STP, would be needed to produce 88.5 grams of ammonia
The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Mass of ammonia = 88.5g
Moles of ammonia = mass / molar mass
= 88.5 / 17
= 5.20 moles
From the reaction,
3 moles of hydrogen are needed to produce 2 moles of ammonia
Thus, 1 mole of ammonia is produced by 3/2 moles of hydrogen
So, 5.20 moles of ammonia is produced by (3 × 5.2) ÷ 2
= 7.8 moles of hydrogen
1 mole of a gas occupies 22.4 L of volume
7.8 moles occupy = 7.8 × 22.4 = 174.72 L
Learn more about Moles, here:
https://brainly.com/question/31597231
#SPJ1
Diethylamine draw structural formula
Answer:
The structural formula for diethylamine is C4H11N
Explanation:
i just told the guy i like that I like him and he said he wants to get to know me better before making a decision. but now everything feels different. he's been really distant. what does that mean and how do I stop getting so attached?
Answer: you have to talk to someone who wont mind wanting to wanting to like you a lot like that.
Explanation: I wish I could be able to talk to someone who would want to get to like me like that, so its a very relatable situation.
Determine the molar mass of a 0.643-g sample of gas occupies 125 mL at 60. cm of Hg and 25°C
Explanation:
To determine the molar mass of the gas, we need to use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature. We can rearrange this equation to solve for the number of moles:
n = (PV) / (RT)
We are given the mass of the gas (0.643 g), the volume (125 mL), the pressure (60. cm Hg), and the temperature (25°C). To use these values in the ideal gas law equation, we need to convert the volume to liters and the pressure to atmospheres (atm) and the temperature to Kelvin (K):
V = 125 mL = 0.125 L
P = 60. cm Hg = 0.789 atm (using the conversion factor 1 atm = 760 mm Hg and 1 cm Hg = 1.33322 mm Hg)
T = 25°C + 273.15 = 298.15 K
Substituting these values into the ideal gas law equation and solving for n gives:
n = (PV) / (RT) = (0.789 atm x 0.125 L) / (0.0821 L·atm/mol·K x 298.15 K) = 0.00314 mol
To find the molar mass, we can use the formula:
molar mass = mass of sample / number of moles
molar mass = 0.643 g / 0.00314 mol = 204.46 g/mol
Therefore, the molar mass of the gas is approximately 204.46 g/mol.
Answer:
To determine the molar mass of the gas, we need to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. We can rearrange this equation to solve for n:
n = PV/RT
First, we need to convert the pressure to atmospheres (atm) and the volume to liters (L):
cm Hg = 0.788 atm (using the conversion factor 1 atm = 760 mm Hg)
125 mL = 0.125 L
Next, we can substitute the given values into the equation and solve for n:
n = (0.788 atm)(0.125 L)/(0.0821 L·atm/mol·K)(298 K) = 0.00472 mol
Finally, we can calculate the molar mass by dividing the mass of the sample by the number of moles:
molar mass = 0.643 g/0.00472 mol = 136 g/mol (rounded to three significant figures)
Therefore, the molar mass of the gas is approximately 136 g/mol.
Given the equation, Na+ + CI→ NaCl, calculate the mass of NaCl produced by the reaction of 54.2 g of chloride ions with an excess of sodium. A. 165.0 g B. 17.8 g c. 72.0 g D. 219.2 g E. 89.3 g
The mass of NaCl produced by the reaction of 54.2 g of chloride ions with an excess of sodium is 89.51 grams.
How to calculate mass using stoichiometry?Stoichiometry is the concentration of a substance in solution, expressed as the number of moles of solute per litre of solution.
According to this question, 1 mole of sodium reacts with 1 mole chloride ion to produce 1 mole of sodium chloride.
54.2 grams of chlorine is equivalent to 1.53 moles. Hence, 1.53 moles of sodium chloride will be produced.
1.53 moles of sodium chloride is equivalent to 89.51 grams.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
What amount of a 75 % m/v solution will be made if 50 g of solute are dissolved? Thank you po in advance.
The mass by volume percentage is an important method which is used to calculate the concentration of a solution. This type of concentration is usually expressed as a percentage. Here the amount of solute is
The mass by volume percentage of a solution is defined as the ratio of the mass of solute that is present in a solution relative to the volume of the solution as a whole.
The equation used to calculate the mass by volume percentage is:
m / v = Mass of solute / Volume (mL) of solution × 100 %
m / v = 50 g / 75 mL + 25 mL = 0.5 × 100 % = 50%
To know more about mass by volume percentage, visit;
https://brainly.com/question/31431972?referrer=searchResults
#SPJ1
Ammonia (NH3) has a heat of vaporization of 23.4 kJ/mol. What quantity of energy (in kilojoules) is required to change 50.5 grams of ammonia from the liquid to the gaseous state?
50.5 grams of ammonia requires 69.498 kJ of energy to vaporize from the liquid to the gaseous state.
To calculate the energy required to vaporize 50.5 grams of ammonia (NH3), we need to first convert the mass of NH3 to moles:
moles of NH3 = mass / molar mass
moles of NH3 = 50.5 g / 17.03 g/mol
moles of NH3 = 2.97 mol
The energy required to vaporize 1 mole of NH3 is 23.4 kJ/mol. Therefore, the energy required to vaporize 2.97 moles of NH3 is:
energy = moles of NH3 x heat of vaporization
energy = 2.97 mol x 23.4 kJ/mol
energy = 69.498 kJ
For more question on energy click on
https://brainly.com/question/30464185
#SPJ11
Calculate the amount of heat, in calories, that must be added to warm 89.7 g
of brick (0.20) from 22.0 °C
to 44.1 °C.
Assume no changes in state occur during this change in temperature.
(3 sig figs) Given the chemical equation below, with 202 grams of Barium Oxide being produced how many grams of Aluminum Oxide would you need? 3 BaSO4 + Al203 —>
3 Ba0 + Al2(SO4)3
44.4 g is the mass of Aluminum Oxide is required for the given chemical reaction 3 BaSO[tex]_4[/tex] + Al[tex]_2[/tex]O[tex]_3[/tex]—> 3 BaO + Al[tex]_2[/tex](SO[tex]_4[/tex])[tex]_3[/tex].
It is the most fundamental characteristic of matter as well as one of the essential quantities in physics. Mass is a term used to describe how much matter is there in a body. The kilogramme (kg) is the international standard of mass. A body's bulk remains constant at all times. only in rare instances where an enormous quantity of energy is supplied to or taken away from a body.
3 BaSO[tex]_4[/tex] + Al[tex]_2[/tex]O[tex]_3[/tex]—> 3 BaO + Al[tex]_2[/tex](SO[tex]_4[/tex])[tex]_3[/tex]
moles of BaO =202/ 153.3
=1.32
moles of Al[tex]_2[/tex]O[tex]_3[/tex] = 1/3×1.32=0.44
mass of Al[tex]_2[/tex]O[tex]_3[/tex] = 0.44×101.9=44.4 g
To know more about mass, here:
https://brainly.com/question/28704035
#SPJ1
The heat of vaporization for ethanol is 0.826 kJ/g
. Calculate the heat energy in joules required to boil 75.25 g
of ethanol.
Answer:
87469.73J
Explanation:
72.25g/0.826kJ/g=87.4697337kJ
I require assistance.
pH is defined as the negative logarithm (base 10) of the hydrogen ion concentration ([H+]) in a solution. Therefore, option (C) is correct.
In other words, the pH scale measures the acidity or basicity of a solution. The lower the pH value, the more acidic the solution is, and the higher the pH value, the more basic or alkaline the solution is.
For example, pure water has a pH of 7, which is considered neutral, meaning it is neither acidic nor basic. Acids have pH values lower than 7, while bases have pH values greater than 7. The pH scale is important in many areas of chemistry, including biochemistry, environmental science, and medicine.
Learn more about pH, here:
https://brainly.com/question/2288405
#SPJ1
If heat is going INTO the system, that means that energy must have come OUT FROM the?
If heat is going into the system, then energy must have come out from the surroundings.
If heat is entering a system, it means that the system is gaining thermal energy, which can lead to an increase in temperature, changes in state, or other effects depending on the nature of the system and the heat transfer mechanism.
The first law of thermodynamics, also known as the law of conservation of energy, states that the total amount of energy in a closed system remains constant, and energy can neither be created nor destroyed, only transferred or converted from one form to another.
When heat enters a system, it is either used to increase the internal energy of the system or to perform work, such as moving a piston or driving an electrical generator.
The amount of heat transferred to a system can be quantified using the equation Q = mcΔT, where Q is the heat transferred, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.
Therefore, if the system is gaining energy in the form of heat, then the surroundings (the rest of the universe) must be losing that same amount of energy. This is because energy is conserved.
For more question on heat click on
https://brainly.com/question/30738335
#SPJ11
What quality does Tom Walker and his wife have in common?
The qualities Tom Walker and his wife have in common were they both were grasping and without conscience
The question has been asked from the story "The Devil and Tom Walker" by Washington Irving. As the story describes Tom's encounter with the devil, he is a complex character. However, he and his wife seem to complement each other well and have some personality traits in common. Tom and his wife are both miserly, avaricious, cruel, and morally void.
More so than her husband, Tom's stereotypically nagging, scolding wife verbally and perhaps even physically abuses him when she's not hoarding his valuables. Tom's wife courageously decides to accept Old Scratch's offer to sell her husband's soul for money when Tom first rejects it. She takes the family's silver into the swamp with her so she may haggle with the devil.
Read more about Tom Walker on:
https://brainly.com/question/30492871
#SPJ1
A sample of gas at a constant
volume initially has a
temperature of 315.0 K with a
pressure of 2.50 atm. The
pressure changes to 3.61 atm.
Calculate the final temperature.
The final temperature of the gas, when the pressure changes from 2.50 atm to 3.61 atm at constant volume, is approximately 454.9 K.
What is the final temperature of the gas?Gay-Lussac's law states that the pressure exerted by a given quantity of gas varies directly with the absolute temperature of the gas.
It is expressed as;
P₁/T₁ = P₂/T₂
Given that:
Initial pressure P₁ = 2.50 atmInitial temperature T₁ = 315.0 KFinal pressure P₂ = 3.61 atmInitial temperature T₂ = ?Plug the given values into the equarion above.
P₁/T₁ = P₂/T₂
P₁T₂ = P₂T₁
[tex]T_2 = \frac{P_2T_1}{P_1}\\ \\T_2 = \frac{3.61 \ *\ 315.0}{2.50} \\\\T_2 = 454.9K[/tex]
Therefore, the final temperature is 454.9 K.
Learn more about Gay-Lussac's law here: brainly.com/question/1358307
#SPJ1
After some salt was added to it, a 45.4 g solution in a coffee-cup calorimeter increased in temperature from 23.0 oC to 31.5 oC.
The specific heat constant
(c) for the solution is 1 cal/g oC. The q of the reaction is ________ cal
The heat absorbed by the solution is 386.9 cal.
First, we need to calculate the heat absorbed by the solution using the formula:
q = m × c × ΔT
Where q is the heat absorbed, m is the mass of the solution, c is the specific heat constant, and ΔT is the change in temperature.
m = 45.4 g
c = 1 cal/g oC
ΔT = 31.5 oC - 23.0 oC = 8.5 oC
Substituting the values in the formula, we get:
q = 45.4 g × 1 cal/g oC × 8.5 oC
q = 386.9 cal
Therefore, the heat absorbed by the solution is 386.9 cal.
Learn more about heat absorbed, here:
https://brainly.com/question/12473602
#SPJ1
2.0grams of helium gas is contained in a tank with a volume of 5.0l at the temperature of 25 degrees celcius what is the pressure of the gas in the tank in atm
The pressure of the helium gas in the tank is 0.990 atm (at 25°C and with a volume of 5.0 L).
To solve this problem, we can use the ideal gas law:
PV = nRT
where P is the pressure of the gas, V is the volume of the tank, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature of the gas in Kelvin.
First, we need to convert the given temperature of 25 degrees Celsius to Kelvin:
T = 25°C + 273.15 = 298.15 K
Next, we need to calculate the number of moles of helium gas using its mass and molar mass:
n = m/MW
where m is the mass of helium and MW is the molar mass of helium, which is 4.003 g/mol.
n = 2.0 g / 4.003 g/mol = 0.499 moles
Now we can put in the values we have into the ideal gas law and solve for P:
P = nRT/V
P = (0.499 mol)(0.08206 L·atm/mol·K)(298.15 K) / 5.0 L
P = 0.990 atm
Therefore, the pressure of the helium gas in the tank is 0.990 atm (at 25°C and with a volume of 5.0 L).
Learn more about Helium Gas at
brainly.com/question/13645498
#SPJ1
The heat capacity of copper metal is 0.38 J/goC. Assume you had a 75 g cube of copper at 25.0oC. What would the final temperature of the copper be (in oC) if it absorbed 150 J of heat?
The final temperature of the copper would be 30.26°C if it absorbed 150 J of heat.
To solve this problem, we can use the formula:
q = m * C * deltaT
where q is the heat absorbed by the copper, m is the mass of the copper, C is the heat capacity of copper, and deltaT is the change in temperature.
Rearranging the formula, we get:
deltaT = q / (m * C)
Substituting the given values, we get:
deltaT = 150 J / (75 g * 0.38 J/g°C) = 5.26 °C
Therefore, the final temperature of the copper will be:
25.0°C + 5.26°C = 30.26 °C
Learn more about heat capacity, here:
https://brainly.com/question/28302909
#SPJ1
Calculate the change in heat when 16.00 g of water vapor (steam) at 100.0°C condenses to liquid water and then cools to 25.50 °C.
The change in heat when 16.00 g of water vapor (steam) at 100.0°C condenses to liquid water and then cools to 25.50°C is -31.25 kJ (exothermic process).
To calculate the change in heat when 16.00 g of water vapor (steam) at 100.0°C condenses to liquid water and then cools to 25.50 °C, we need to consider two separate processes and add their heat changes together:
The heat change during the condensation of steam to liquid water:
The heat change during this process can be calculated using the heat of vaporization of water, which is 40.7 kJ/mol at 100.0°C.
First, we need to determine the number of moles of water in 16.00 g:
moles of water = mass of water / molar mass of water
moles of water = 16.00 g / 18.015 g/mol
moles of water = 0.8886 mol
The heat change during the condensation of steam to liquid water can be calculated as follows:
q1 = moles of water x heat of vaporization
q1 = 0.8886 mol x 40.7 kJ/mol
q1 = 36.21 kJ
The heat change during the cooling of liquid water from 100.0°C to 25.50°C:
The heat change during this process can be calculated using the specific heat capacity of water, which is 4.184 J/g°C.
The temperature change during this process is:
ΔT = final temperature - initial temperature
ΔT = 25.50°C - 100.0°C
ΔT = -74.50°C
The heat change during the cooling of liquid water can be calculated as follows:
q2 = mass of water x specific heat capacity x ΔT
q2 = 16.00 g x 4.184 J/g°C x (-74.50°C)
q2 = -4,958 J
Therefore, the total heat change for the two processes is:
ΔH = q1 + q2
ΔH = 36.21 kJ + (-4,958 J)
ΔH = 36.21 kJ - 4.958 kJ
ΔH = 31.25 kJ
Therefore, the change in heat when 16.00 g of water vapor (steam) at 100.0°C condenses to liquid water and then cools to 25.50°C is -31.25 kJ (exothermic process).
Learn more about water vapor at
brainly.com/question/14529481
#SPJ1
Calculate the amount of heat, in calories, that must be added to warm 89.7 g
of wood (0.10) from 22.0 °C
to 44.1 °C.
Assume no changes in state occur during this change in temperature.
The solubility of PbSO4 is 0.048g/1iter. What is the Ksp of PbSO4?
(MM PbSO4 = 303.3)
(a) 1.3x10-9 *(b) 2.5x10-8 (c) 1.6x10-4 (d) 3.2x10-6 (e) 1.3x10-
This question was answered previously, but there was no explanation as to how the person got the values they got. Please be thorough.
After evaluating all the options we come to the conclusion that the answer is 2.5x10-8 which is Option B.
The solubility product constant (Ksp) of PbSO₄ can be calculated using the formula Ksp = [Pb²⁺][SO₄²⁻]. Given that the solubility of PbSO₄ is 0.048g/1L, we can calculate the molar solubility of PbSO₄ as follows:
Molar mass of PbSO₄ = 303.3 g/mol
Solubility of PbSO₄ = 0.048 g/L
Molar solubility of PbSO₄ = (0.048 g/L) / (303.3 g/mol) = 1.58 x 10⁻⁴M
Now we can use the molar solubility to calculate the Ksp of PbSO₄ as follows:
PbSO₄(s) ⇌ Pb²⁺(aq) + SO₄²⁻(aq)
Ksp = [Pb²⁺][ SO₄²⁻] = (1.58 x 10⁻⁴M)(1.58 x 10⁻⁴M) = 2.50 x 10⁻⁸
Therefore, the answer is (b) 2.50 x 10⁻⁸.
To learn more about solubility
https://brainly.com/question/23946616
#SPJ1
how would you confirm the presence of lead in an ore?
There are numerous ways to determine whether lead is present in an ore. Atomic absorption spectroscopy is a popular approach. With this method, an ore sample is dissolved in acid and then atomized in a flame or plasma.
The sample's atoms will absorb light at particular wavelengths that are peculiar to the element under investigation. The amount of light absorbed can be used to calculate how much lead is present in the sample. Inductively coupled plasma mass spectrometry and X-ray fluorescence spectroscopy are further techniques. It is crucial to remember that these procedures call for specialized tools and training, thus they ought to only be carried out in a lab by qualified experts.
To know more about spectrometry, here
brainly.com/question/31075363
#SPJ1
Using the standard enthalpies of formations find the standard enthalpy of the reaction below. 2A1+ 3CuCl₂ → 2AICI, + 3Cu
The standard enthalpy of the reaction is -892kJ/mol. Option A
What is the standard enthalpy of reaction?The standard enthalpy of reaction (ΔH°rxn) is the change in enthalpy that occurs during a chemical reaction when all reactants and products are in their standard states (usually at 25°C and 1 atm pressure)
Then enthalpy of the reaction = Enthalpy of the products - Enthalpy of the reactants
Hence;
[2(-704) + 0] - [0 + 3(-172)
-1408 + 516
=-892kJ/mol
The standard enthalpy of reaction can be calculated by subtracting the standard enthalpies of formation of the reactants.
Learn more about enthalpy:https://brainly.com/question/16720480
#SPJ1
What is true of an aqueous solution that is 15.0 percent HNO3 by mass?
A. It contains 15.0 grams of HNO3 per 1.0 liter of water.
B. It contains 15.0 grams of HNO3 per 100 grams of solution.
C. It contains 15.0 moles of HNO3 per 100 moles of water.
D. It contains 15.0 moles of HNO3 per 100 liter of solution.
Answer:
B. It contains 15.0 grams of HNO3 per 100 grams of solution.
Explanation:
The question asks about the mass percent of HNO3 in a solution. Mass percent is the ratio of the mass of the solute (HNO3) to the mass of the solution (HNO3 + water) multiplied by 100. A solution that is 15.0 percent HNO3 by mass means that for every 100 grams of solution, there are 15.0 grams of HNO3 and 85.0 grams of water. This ratio does not change with the volume or the moles of the solution or the solute. The only answer that matches this definition is B. It contains 15.0 grams of HNO3 per 100 grams of solution.
