ANSWER THE FOLLOWING:

Rules Governing the Allowed Combinations of Quantum Numbers

The principal quantum range (n) can't be zero. The allowed values of n are consequently 1, 2, 3, 4, and so on. The angular quantum quantity (l) can be any integer between zero and n - 1. If n = 3, for example, l can be either 0, 1, or 2.

The set of quantum numbers n=1,l=1,ml=0,ms=+21 is no longer viable for an electron.

So right set of quantum numbers is n=2,l=1,m=0,s=+21.

Solution : The designation `4p` indicates that the orbital has a important quantum number `n = 4` and an angular-momentum quantum wide variety `l = 1`. The magnetic quantum quantity can have any of the values `-1, 0`, or `+1`.

Learn more about quantum here;

https://brainly.com/question/2292596

#SPJ1

The molecular formula of acetylene is C₂H₂ and ethylene is C₂H₄.

The simplest whole-number ratio of the atoms in a compound is shown by empirical formulae, the number of each type of atom in a molecule is shown by molecular formulas, and the bonds between the atoms in a molecule are shown by structural formulas. The empirical formula of naphthalene is C₁₀H₈ and benzene is C₆H₆.

The chemical formula of the reactants and products are:

The balanced reactions are:

Learn more about molecular formulas, here:

https://brainly.com/question/14425592

#SPJ1

The structure of the compound is shown in the image attached

The molecular formula gives information about the types and number of atoms in the compound. This can be used to determine the possible functional groups and the degree of unsaturation (the number of rings or double bonds) in the compound.

When we look at the name of the compound, we can be able to tell the bonds and the substituents that we have in the compound and that would help us to deduce its structure.

Learn more about organic compound:https://brainly.com/question/5994723

#SPJ1

Molecular formula mass = empirical formula mass x n

We know that the molecular formula mass is approximately 60 g/mol, so that we can set up an equation:

60 g/mol = 30 g/mol x n

Solving for "n," we get:

n = 2

This means that the molecular formula of the compound is twice the empirical formula of C2H4O2. Therefore, the compound is acetic acid.

Acetic acid is one of the simplest carboxylic acids and is an important chemical reagent and industrial chemical. It is widely used in the production of vinyl acetate monomer (VAM), which is used in manufacturing polymers, adhesives, and coatings. It is also used as a solvent and preservative in food and other products.

Ethanoic acid is the main component of vinegar, typically a 5% solution of acetic acid in water. In addition to its industrial and commercial uses, acetic acid also has some medical applications, such as in treating ear infections and as a topical antimicrobial agent.

To learn more about acid, visit here:

https://brainly.com/question/14072179

#SPJ1

Taking into account the reaction stoichiometry, 0.546 grams of H₂O are produced when 0.485 grams of O₂ reacts with H₂.

In first place, the balanced reaction is:

2 H₂ + O₂  → 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 32 grams of O₂ form 36 grams of H₂O, 0.485 grams of O₂ form how much mass of H₂O?

mass of H₂O= (0.485 grams of O₂× 36 grams of H₂O) ÷32 grams of O₂

mass of H₂O= 0.546 grams

Finally, 0.546 grams of H₂O are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Answer:

Explanation:

The types and numbers of atoms that repeat to make up a substance, which is also known as its chemical composition, have a significant impact on the substance's properties.

For example, the number of atoms in a molecule can affect its mass and density, as well as its reactivity with other substances. The types of atoms present can affect the chemical reactivity, melting and boiling points, and other physical properties of the substance.

Additionally, the arrangement of atoms in a molecule can also affect its properties. For example, the orientation of atoms can affect the molecule's polarity, which can affect its solubility in different solvents.

In summary, the types and numbers of atoms that repeat to make up a substance can have a significant impact on its properties, including its chemical and physical properties.

The point group of porphyrin is D4h, and the point group of H2TPP (dihydrogen tetraphenylporphyrin) is D2h.

What is porphyrin ?

Porphyrins are a group of organic compounds that have a characteristic heterocyclic macrocycle structure known as a porphyrin ring. The porphyrin ring is composed of four pyrrole subunits linked together by methine bridges. Porphyrins are widely distributed in nature, and they are essential components of many biological molecules, including hemoglobin, myoglobin, and chlorophyll.

In addition to their biological roles, porphyrins have important applications in materials science, catalysis, and medicine. For example, porphyrins can be used as photosensitizers in photodynamic therapy, a treatment for cancer and other diseases that involves the activation of light-sensitive drugs to destroy cancer cells. Porphyrins also have interesting optical and electronic properties that make them useful in the development of sensors, photovoltaic cells, and other electronic devices.

The point group of porphyrin is D4h, and the point group of H2TPP (dihydrogen tetraphenylporphyrin) is D2h.

Porphyrin has a fourfold rotation axis (C4), four twofold rotation axes (C2), two mirror planes (σh), and a center of inversion (i), resulting in the point group D4h.

H2TPP is a derivative of porphyrin, but it lacks one of the four phenyl groups. Therefore, it has only two perpendicular mirror planes (σh) and a C2 rotation axis, resulting in the point group D2h.

Learn more about porphyrin  click here:

https://brainly.com/question/30115332

#SPJ1

Explanation:

Refer to pic...........

A piece of metal with a mass of 14.9 g is heated from 72.35°C. When the metal is placed in 75.0 g of water at 20.0°C, the temperature of the water rises by 2.85°C. 66.35 joule/Kg °C is the specific heat capacity of the metal.

In thermodynamics, the specific heat capacity (symbol c) of a substance is the heat capacity of a sample of the substance divided by the mass of the sample, also sometimes referred to as massic heat capacity.

Informally, it is the amount of heat that must be added to one unit of mass of the substance in order to cause an increase of one unit in temperature.

Cp of metal× Mass of metal*(initial temperature-final temperature)=Cp of water× Mass of water×(final temperature - initial temperature)

Cp of metal×14.9×(98–28.5)=Cp of water×75×(28.5–20)

Cp of metal×14.9×(98–28.5)=Cp of water×75×(28.5–20)

Cp of metal =66.35 joule/Kg °C.

Therefore, 66.35 joule/Kg °C is the specific heat capacity of the metal.

To know more about specific heat capacity, here:

https://brainly.com/question/29766819

#SPJ1

the checkboxes next to each row's HClO(aq)+(ch3)3 N(aq)->ClO-(aq)+(CH3)3 reactant to indicate that you agree with it (aq) In this HCl, the NH4+ is Brennstoff-Lowry Acid.

In the food, textile, metal, & rubber sectors, hydrogen chloride (HCl), also known as bleaching agent, is frequently used to neutralize alkaline substances. It quickly hydrolyzes if exposed to water and is neutralized if discharged into the soil.

A gas at ordinary temperature and pressure, hydrogen chloride (HCl) is a combination of the metals hydrogen and chlorine. Hydrochloric acid is a gaseous mixture of the gas and water.

To know more about HCl visit:

https://brainly.com/question/29204122

#SPJ1

Answer:

1. The total masses of the products (hydrogen and oxygen gases) is equal to the mass of the water that was decomposed.

2. The number of atoms of each element in the reactants is equal to the number of atoms of each element in the products.

3. The total charge of the reactants is equal to the total charge of the products.

Explanation: water.

Irradiating wheat to kill fungus is an example of an agricultural use for radiation.

option B.

Irradiation of agricultural products is a process in which ionizing radiation (such as gamma rays or electron beams) is used to eliminate harmful organisms such as bacteria, viruses, fungi, and insects that may be present in the products. The process involves exposing the product to a controlled dose of radiation, which kills or sterilizes the harmful organisms without significantly affecting the quality, taste, or nutritional value of the product.

Thus, irradiation can be used to eliminate pests and diseases in agricultural products, including grains, fruits, and vegetables. Irradiation of wheat can be used to eliminate fungi, insects, and other harmful organisms, improving the shelf life and quality of the product.

Learn more about irradiation here:

https://brainly.com/question/13049371

#SPJ1

The 25 is the new volume of this gas at 5 degrees Celcius and 2 atm.

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

What is volume ?

Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.

Therefore, 25 is the new volume of this gas at 5 degrees Celcius and 2 atm.

Learn more about temperature from the given link.

https://brainly.com/question/25677592

#SPJ1

According to the periodical table's trends, an element with qualities like to sulfur (S) is most likely to mix with mag (Mg), as magnesium has a predisposition to react with sensitive nonmetals the same as sulfur and produce compounds.

For the majority of individuals, regular doses under 350 mg are safe. The adverse effects of magnesium can also include nausea, nausea, diarrhea, and upset stomach in some people. Magnesium is POSSIBLY SAFE Only if TAKEN IN VERY HIGH AMOUNTS (more than 350 mg daily).

And then use magnesium, individuals who have diabetes, digestive disease, heart disease, or renal disease should see their healthcare professional.

To know more about magnesium visit:

https://brainly.com/question/1533548

#SPJ1

The balanced chemical equation for the reaction is: Fe(s) + 2CuCl2(aq) → 2FeCl3(aq) + Cu(s)

The equation shows that one mole of solid iron reacts with two moles of aqueous copper(II) chloride to produce two moles of aqueous iron(III) chloride and one mole of solid copper.

To balance the equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Here's how we balance the equation:

Fe(s) + 2CuCl2(aq) → 2FeCl3(aq) + Cu(s)

On the left-hand side, we have one iron atom (Fe) and two copper atoms (Cu). On the right-hand side, we have two iron atoms (Fe) and one copper atom (Cu). To balance the iron atoms, we add a coefficient of 2 in front of Fe(s) on the left-hand side:

2Fe(s) + 2CuCl2(aq) → 2FeCl3(aq) + Cu(s)

Now we have two iron atoms on both sides. However, we also have four chloride ions (Cl-) on the left-hand side and six chloride ions on the right-hand side. To balance the chloride ions, we add a coefficient of 3 in front of CuCl2(aq) on the left-hand side:

2Fe(s) + 3CuCl2(aq) → 2FeCl3(aq) + Cu(s)

Now we have two iron atoms, six chloride ions, two copper ions (Cu2+), and one copper atom on both sides. The equation is balanced!

Learn more about balanced chemical equation here: https://brainly.com/question/11904811

#SPJ1

The solar energy is a massive source of energy which can generate electricity and reduce the global warming emissions. But the set up of solar panels have both positives and negatives.

The manufacturing process of solar panels requires hazardous chemicals and materials for cleaning the semiconductors. The chemicals include hydrofluoric acid, sulfuric acid, etc.

In addition to the release of these chemicals, the solar panel manufactures inhale silicon dust which threatens the public health. The solar energy systems require a large area of land which can lead to the loss of wildlife habitats.

The construction of solar panels also affect soil compaction and erosion.

To know more about solar panels, visit;

https://brainly.com/question/28458069

#SPJ1

The amount of heat required to convert 94 g of ice at -31◦C to steam at 143.6◦C is 2.32 kJ.

Amount is a monetary measurement of value. It is a numerical value assigned to goods, services, and other transactions that indicate their worth in a currency. Amounts are used to quantify the size of a purchase or sale, and to determine the cost or value of an item. Amounts are also used to track debts, credits, investments, and other financial transactions.

This can be calculated using the formula for heat, Q = mCΔT, where m is the mass of the object, C is the specific heat capacity, and ΔT is the change in temperature. In this case, m is 94 g, C is 4.184 J/g · ◦C for water, and ΔT = 174.6◦C. Therefore, Q = 94 × 4.184 × 174.6 = 2.32 kJ.

To know more about the amount click-
https://brainly.com/question/24795637
#SPJ1

J.J Thomson performed some experiments to demonstrates the structure of atom. He discovered the small negatively charged particles later called the electrons. Hence, option d is correct.

There were various atomic models to describe the structure and electronic properties of atom. J.J. Thomson conducted the cathode ray experiment where, he he hit the cathode ray to and measured the electric charge with electrometer.  

From this, he concluded that the electric charge and the cathode rays was combined and are the same entity. The negatively charged particles in the atoms then called as electrons. Therefore, option d is correct.

Thomson demonstrated the plum- pudding model of atom, where the negatively charged electrons are randomly located inside the atom as the seeds in the plum-pudding. But later modern atomic models replaced this concept.

Find more on J. J. Thomson:

https://brainly.com/question/12839076

#SPJ9

Judy and her parents have an adaptation that helps them run from predators coming; this adaptation is called flight. Flight is an innate ability to fly away from danger by using wings or other means.

Adaptation is the process of change in an organism that helps it better survive in its environment. This can include changes in behavior, physiology, and even genetics that allow an organism to better survive and reproduce. For example, a bird may migrate to a warmer place in the winter to escape the cold temperatures, or a plant may produce thorns to protect itself from being eaten by predators. Adaptation is an important factor in the survival of a species, as it allows populations to adjust to new environmental conditions. As environmental conditions change over time, adaptation can help species adjust to survive in the new conditions.

Flight is a common adaptation used by many animals, including Judy and her parents. Flight allows them to quickly fly away from predators in order to avoid being hurt or killed. They can fly away from danger in a matter of seconds, giving them a better chance of survival. Flight is an important adaptation that helps Judy and her parents stay safe and out of harm's way.

To learn more about adaptation

https://brainly.com/question/8648278

#SPJ1

Answer:

When calcium forms an ion, it loses two electrons from its outermost shell, resulting in a full valence shell with eight electrons in the inner shell. Therefore, the most likely overall charge for the calcium ion is 2+.

Explanation:

Answer:

The balloon filled with 02 collapses because the gas molecules are attracted to each other and condense into a liquid when cooled. Helium, on the other hand, is a noble gas that does not form compounds with other elements and therefore does not condense into a liquid at low temperatures.

One mole of H₂ reacts with one mole of Cl₂ to give 2 moles of hydrogen chloride gas. The volume of H₂ that will completely react with Cl₂ is 22.4 litres.

In the International System of Units, the mole is the unit of amount of a substance. It is specified that the mole contains exactly 6.022 * 10²³ elementary particles such as atoms, ions or molecules, similar to how a dozen denotes twelve.

At standard temperature and pressure (STP), one mole of any gas occupies a volume of 22.4 litres. From the given equation, the molar ratio of hydrogen and chlorine is 1:1. Since 22.4 litres of chlorine gas is used, then similarly, 22.4 litres of hydrogen gas must also be used up to give 2 moles of the product, hydrogen chloride gas.

To find out more about STP conditions, visit:

https://brainly.com/question/29129606

#SPJ1

The cell organelles in the diagram are lysosome and nucleus.

This is referred to as a small structure in a cell that is surrounded by a membrane and has specific types of functions based on their respective properties.

The nucleus is a type of organelle which is involved in the control of the activities of the cells such as controlling of the genetical information of the cell and thus the heredity characteristics of an organism and control of the protein and enzyme synthesis. Another organelle is referred to as the lysosomes which functions as the digestive system of the cell, serving both to degrade material taken up from outside the cell and to digest obsolete components of the cell itself.

Read more about Organelle here https://brainly.com/question/16601148

#SPJ1

At chemical equilibrium, the partial pressure of the three gases is 0.265 atmospheres.

Chemical equilibrium is defined as the condition which arises during the course of a reversible chemical reaction with no net change in amount of reactants and products.A reversible chemical reaction is the one wherein the products as soon as they are formed react together to produce back the reactants.

At equilibrium, the two opposing reactions which take place take place at equal rates and there is no net change in amount of the substances which are involved in the chemical reaction.At equilibrium, the reaction is considered to be complete . Conditions which are required for equilibrium are given by quantitative formulation.

Learn more about chemical equilibrium,here:

https://brainly.com/question/3920294

#SPJ9

Answer:

the ribosome will read the mRNA sequence differently

Explanation:

The change can cause the amino acid to be produced

When a tiger with a mass of 31kg is running to the east with a velocity of 15m/s, the momentum of the tiger is 465kg-m/s.

What is momentum?

3 words that are used to define momentum is "Mass in motion". If an object is moving, then it has momentum because all the objects have particular masses, those will be then called as masses in motion. Linear momentum is denoted by P. Mathematically, it is represented as-

P = m × v

where m = mass of the object

v = velocity of the object in a particular direction

Momentum that is involved with circular motion is called as Angular momentum.

Given,

mass of a tiger = 31kg

velocity of  tiger = 15m/s

Momentum = p = 31 × 15 = 465kg-m/s

Therefore, when a tiger with a mass of 31kg is running to the east with a velocity of 15m/s, the momentum of the tiger is 465kg-m/s.

Learn more about momentum, here:

https://brainly.com/question/30677308

#SPJ9

The experimental yield is 2.9 g, the theoretical yield is 2.96 g, and the percent yield is 97.97%.

How to find the experimental yield, theoretical yield and Percent yield?

To find the experimental yield, we need to determine the weight of copper chloride (CuCl) obtained from the reaction. We can calculate this by subtracting the weight of the watch glass and filter paper from the weight of the watch glass, filter paper, and CuCl precipitate:

Weight of CuCl = (Weight of Watch Glass + Filter Paper + CuCl Precipitate) - (Weight of Watch Glass and Filter Paper)

Weight of CuCl = 13.4 g - 10.5 g

Weight of CuCl = 2.9 g

To find the theoretical yield, we need to calculate the amount of copper that should be produced based on the reaction stoichiometry. The balanced chemical equation for the reaction between copper and nitric acid is:

Cu + 4HNO3 → Cu(NO3)2 + 2NO2 + 2H2O

From the equation, we can see that one mole of copper reacts with four moles of nitric acid to produce one mole of copper(II) nitrate (Cu(NO3)2). The molar mass of copper is 63.55 g/mol, so the amount of copper used in the reaction is:

Amount of Cu = Weight of Cu / Molar mass of Cu

Amount of Cu = 1.034 g / 63.55 g/mol

Amount of Cu = 0.016 mol

Since one mole of copper produces one mole of copper(II) nitrate, the theoretical yield of copper(II) nitrate is also 0.016 mol.

The theoretical yield of copper(II) nitrate is:

Theoretical yield = Amount of Cu(NO3)2 x Molar mass of Cu(NO3)2

Theoretical yield = 0.016 mol x 187.57 g/mol

Theoretical yield = 2.96 g

Finally, we can calculate the percent yield using the formula:

Percent yield = (Experimental yield / Theoretical yield) x 100%

Plugging in the values we calculated, we get:

Percent yield = (2.9 g / 2.96 g) x 100%

Percent yield = 97.97%

Therefore, the experimental yield is 2.9 g, the theoretical yield is 2.96 g, and the percent yield is 97.97%.

To learn more about experimental yield, visit: https://brainly.com/question/30026782

#SPJ1

Answer:

Burning of wood is chemical change

Dry ice into Carbon dioxide conversion is physical change.

Explanation:

Because when wood is burnt it cannot be recovered back by tthe ashes. So it is chemical change.

Dry ice conversion into Carbon dioxide is a physical change because the chemical composition remains same.

Answer:

wood = chemical

dry ice = physical

Explanation:

The 30m this affect the speed of light as it passes around the object.

The rate of a directionally changing object's location. The SI unit of speed is created by combining the fundamental units of length and time. Meters per second (m/s) is the unit of speed in the metric system.

Space is occupied by every three-dimensional object. Its volume serves as a gauge for this area. The area contained by an object's limits in three-dimensional space is referred to as its volume. Another name for it is an object's capacity.

Therefore, 30m this affect the speed of light as it passes around the object.

Learn more about speed from the given link.

https://brainly.com/question/13262646

#SPJ1

Answer:

B. The products will contain 4 Cu atoms and 5 H₂O molecules.

Explanation: