Are the properties of the element and its compounds the same? Use
fluorine and fluorides to explain your answer.
3 marks

The molarity of the solution produced by using the 15.2g of calcium chloride and the 345g of methanol (CH₃OH) is 0.397 M.

The expression for the molarity is as :

Molarity = moles of the solute / solvent in kg

The number of solute, calcium chloride = mass / molar mass

The molar mass of the calcium chloride = 110.98 g/mol

The number of solute, calcium chloride = 15.2 / 110.98

number of solute, calcium chloride = 0.137 mol

The mass of the sovent in kg = 45 g = 0.345 kh

The molarity = 0.137 / 0.345

The molarity = 0.397 M

To learn more about molarity here

https://brainly.com/question/15137362

#SPJ4

By drawing the resonance structures of nitromethane and methyl nitrite, you can determine that the N-O bond length in methyl nitrite is shorter than in nitromethane due to the partial double bond character in methyl nitrite.

Nitromethane (CH3NO2) and methyl nitrite (CH3ONO) share the same empirical formula. By drawing the resonance structures of these two molecules, you can obtain information regarding the N-O bond length.
For nitromethane (CH3NO2), there is only one resonance structure, with a single bond between the nitrogen and oxygen atom. This single bond results in a longer N-O bond length.

For methyl nitrite (CH3ONO), there are two resonance structures. In one structure, there is a double bond between the nitrogen and oxygen atom, and in the other structure, there is a single bond between the nitrogen and oxygen atom. The true structure of methyl nitrite is a combination of these two resonance structures, resulting in a partial double bond character and a shorter N-O bond length compared to nitromethane.

In conclusion, by drawing the resonance structures of nitromethane and methyl nitrite, you can determine that the N-O bond length in methyl nitrite is shorter than in nitromethane due to the partial double bond character in methyl nitrite.

To know more about bond length, refer

https://brainly.com/question/16012396

#SPJ11

The second part of Newton's First Law states that an object at rest will remain at rest unless acted upon by an unbalanced external force.

The second part of Newton's First Law, also known as the Law of Inertia, means that a stationary object will not start moving or change its position unless a force is applied to it. This occurs because of the object's inertia, which is its resistance to changes in its state of motion.

When no net external force acts on an object, its velocity remains constant, and if the initial velocity is zero, the object remains at rest. For example, a book lying on a table will not move unless someone pushes or pulls it, overcoming its inertia. Similarly, a ball on the ground won't roll unless a force, such as a kick, is applied to it.

In conclusion, Newton's First Law emphasizes the importance of external forces in changing an object's state of motion, either from rest to motion or vice versa. An object at rest will stay at rest unless an unbalanced force overcomes its inertia and initiates movement.

Learn more about Law of Inertia here: https://brainly.com/question/30595480

#SPJ11

Ions present in the solution of the Na₃PO₄ is Na⁺ and PO₄³⁻.

The Sodium is the metal from the first column group and it has ability to donate ion and form the 1+ charge. The Phosphate has the ability to form the negative ion as the 3- charge. This is the reason that there are the 3 sodium ion for the 1 phosphate ion when Na₃PO₄ molecule is dissolved in the water. The ion are :

Na₃PO₄  --->  3Na⁺  +  PO₄³⁻

The ionic compound name is the sodium phosphate. The ionic compound is formed when the bond is formed by the sharing of the electrons.

To learn more about ions here

https://brainly.com/question/21790979

#SPJ4

Conformational isomers have the same connectivity, as they differ only in the orientation of their atoms in space, while configurational isomers have different connectivity as they have a different arrangement of their atoms in space.

Conformational isomers have the same molecular formula and the same connectivity of atoms, but they differ in the spatial arrangement of those atoms due to the rotation around single bonds. Configurational isomers, on the other hand, have the same molecular formula but different connectivity, meaning they cannot be interconverted without breaking and reforming covalent bonds.

To know more about Isomers:

https://brainly.com/question/29385265

#SPJ11

Option c is correct. Volatile liquids are described by all of the following except volatile liquids have strong cohesive forces.

Volatile liquids are fluids with relatively high vapor pressures that quickly evaporate at room temperature. When the rate of evaporation and condensation are equal, the pressure applied by the gas molecules above a liquid is known as the vapor pressure.

The intermolecular interactions that hold identical molecules together are referred to as cohesion, whereas the forces that hold different molecules together are referred to as adhesion.

Because volatile liquids typically have weak intermolecular interactions and low cohesiveness, they are more likely to easily separate into vapor molecules. As a result, option d) is likewise true with reference to volatile liquids.

Learn more about Volatile liquids

https://brainly.com/question/29891312

#SPJ4

The hydroxide ion concentration in an aqueous solution that contains 3.50 × 10^-2 M in hydronium ion is 2.86 x 10^-13 M.

To calculate the hydroxide ion concentration, we can use the equation Kw = [H+][OH-], where Kw is the ion product constant of water (1.0 x 10^-14 at 25°C).

We are given that the solution has a hydronium ion concentration of 3.50 x 10^-2 M. Since this is an acid solution, we can assume that it will produce some amount of hydroxide ions when it dissociates. Let x be the concentration of hydroxide ions produced.

So, we can set up the equation:

Kw = [H+][OH-]
1.0 x 10^-14 = (3.50 x 10^-2)(x)

Solving for x, we get:

x = 2.86 x 10^-13 M

Therefore, the hydroxide ion concentration in the solution is 2.86 x 10^-13 M.

The answer is C) 2.86 x 10^-13 M.

Know more about Hydroxide ion concentration more:

https://brainly.com/question/4617925

#SPJ11

Answer:

When sodium sulfate (Na2SO3) reacts with hydrochloric acid (HCl), the reaction produces sodium chloride (NaCl), water (H2O), and sulfur dioxide (SO2).

2. Hydrochloric acid (HCl) reacts with calcium carbonate (CaCO3) to form calcium chloride (CaCl2), carbon dioxide (CO2), and water (H2O).

Different concentrations of sulfuric acid and sodium hydroxide are used in Part I of a titration experiment to achieve the required stoichiometric ratio of 1:2, where a higher concentration of sodium hydroxide is needed to neutralize the acid.

In Part I of a titration experiment, different concentrations are used for sulfuric acid and sodium hydroxide because their stoichiometric reaction requires different amounts of each reagent to neutralize the other. The reaction between sulfuric acid and sodium hydroxide involves a 1:2 ratio of acid to base, meaning that two moles of sodium hydroxide are required to neutralize one mole of sulfuric acid.

To achieve this stoichiometric ratio, a higher concentration of sodium hydroxide is needed relative to the sulfuric acid. Therefore, in the experiment, a 3 M solution of sulfuric acid is used while a 6 M solution of sodium hydroxide is used to ensure that the stoichiometric ratio is achieved when titrating the two solutions together.

Learn more about Titration experiment

brainly.com/question/16839748

#SPJ11

it is essential to act quickly and follow proper safety measures when dealing with hazardous chemicals like concentrated HCl.

If concentrated HCl comes into contact with your skin, follow these steps:
1. Immediately rinse the affected area with plenty of water, using a gentle stream for at least 15 minutes. This will help to dilute and remove the HCl from your skin.
2. Remove any clothing or jewelry that may have been contaminated with the HCl, being cautious not to spread the chemical to other parts of your body.
3. While rinsing, avoid rubbing or scrubbing the skin as this may worsen the irritation.
4. After rinsing, gently pat the area dry with a clean cloth or paper towel.
5. Seek medical attention, especially if the skin is severely irritated or burned, or if the HCl contacted a sensitive area such as the eyes or mouth.
Remember, it is essential to act quickly and follow proper safety measures when dealing with hazardous chemicals like concentrated HCl.

Learn more about HCl here

https://brainly.com/question/30233723

#SPJ11

D) 80.0 mL volume of 5.00 × 10^-3 M HNO3 is needed to titrate 40.00 mL of 5.00 × 10^-3 M Ca(OH)2 to the equivalence point.

The equivalence point is the point at which the number of moles of acid and base are equal. Titration is the process of adding a known volume of a solution of known concentration to a known volume of a solution of unknown concentration until the reaction between the two is complete.

In this case, we have a solution of HNO3 of concentration 5.00 × 10^-3 M and a solution of Ca(OH)2 of concentration 5.00 × 10^-3 M. We want to know the volume of HNO3 needed to titrate 40.00 mL of Ca(OH)2 to the equivalence point.

The balanced chemical equation for the reaction between HNO3 and Ca(OH)2 is:

2HNO3 + Ca(OH)2 → Ca(NO3)2 + 2H2O

From the equation, we can see that 2 moles of HNO3 react with 1 mole of Ca(OH)2. Therefore, the number of moles of HNO3 needed to react with 1 mole of Ca(OH)2 is 2.

To find the number of moles of Ca(OH)2 in 40.00 mL of a 5.00 × 10^-3 M solution, we use the formula:

moles of solute = concentration × volume (in liters)

moles of Ca(OH)2 = 5.00 × 10^-3 M × 40.00 mL / 1000 mL/L = 2.00 × 10^-4 moles

Since we need 2 moles of HNO3 to react with 1 mole of Ca(OH)2, we need:

2 × 2.00 × 10^-4 = 4.00 × 10^-4 moles of HNO3

To find the volume of 5.00 × 10^-3 M HNO3 needed to provide 4.00 × 10^-4 moles of HNO3, we use the formula:

moles of solute = concentration × volume (in liters)

4.00 × 10^-4 moles = 5.00 × 10^-3 M × volume / 1000 mL/L

volume = 8.00 × 10^-2 L = 80.0 mL

Therefore, the correct answer is D) 80.0 mL.

Learn more about equivalence : https://brainly.com/question/30592456  

#SPJ11

The Na/K+ ATPase pumps out 3 Na+ for every 2 K+ in. It maintains a low concentration of Na+ and a high concentration of K+.

The Na+/K+ ATPase is an enzyme that is found in all animal cells. It is present in the cell membrane of the cells. It plays a vital role in cell physiology. For every ATP molecule used by the pump, 3 Na+ ions are exported and 2K+ ions are imported. It is an electrogenic transmembrane enzyme.

It has two vital roles: to maintain the osmotic equilibrium in the cells and also to maintain the membrane potential. It maintains the electrochemical gradient of the cells.

To learn more about Na+/K+ ATPase, visit: https://brainly.com/question/6919065

#SPJ11

2.04 moles of hydrogen gas will completely react with iron oxide to yield 24.5 grammes of water.

Calculating the masses and, on occasion, the volumes of the reactants and products in a chemical process is the subject of stoichiometry. We may also state that it is nothing more than essentially the proportion between the reactant and product quantities in a chemical process.

3 H₂(g) + Fe₂O₃(s) → 2 Fe(s) + 3 H₂O(g)

This equation tells us that 3 moles of hydrogen gas react with 1 mole of iron oxide to produce 2 moles of iron and 3 moles of water.

From the given information, we know that 2.04 moles of hydrogen gas are reacting. According to the stoichiometry of the balanced equation, this amount of hydrogen gas will produce:

(2/3) x 2.04 = 1.36 moles of water

Finally, we can use the molar mass of water to convert from moles to grams:

1.36 moles x 18.015 g/mol = 24.5 g of water

To know more about hydrogen gas visit:-

https://brainly.com/question/12745309

#SPJ1

To calculate the hydronium ion concentration in an aqueous solution with a pH of 9.85 at 25°C, we can use the pH formula:

[tex]pH = -log10[H_{3} O+][/tex]

Where pH is the pH of the solution, and [tex]H_{3}O+[/tex]represents the hydronium ion concentration.

We have the pH value (9.85), so we need to rearrange the formula to solve for [[tex]H_{3}O+[/tex]]:

[tex][H_{3} O+] = 10^(-pH)[/tex]

Now, plug in the pH value:

[tex][H_{3} O+] = 10^(-9.85)[/tex]

Calculating the hydronium ion concentration, we get:

[tex][H_{3} O+] ≈ 1.4 × 10^-10 M[/tex]

So, the correct answer is:
E) 1.4 × 10^-10 M

To know more about hydronium ion concentration :

https://brainly.com/question/28173930

#SPJ11

The magnetic force of a material comes from the spinning of electrons.

Electrons have a property called spin, which generates a magnetic moment. When many electrons in a material have their spins aligned in the same direction, they create a magnetic field.)
                                   The magnetic force of a material originates from the spinning (also known as the magnetic moment) of electrons. This is because electrons have both charge and angular momentum, which together create a magnetic dipole moment and contribute to the overall magnetic properties of a material.

                                    The magnetic force of a material comes from the spinning of electrons. Electrons have a property called spin, which generates a magnetic moment. When many electrons in a material have their spins aligned in the same direction, they create a magnetic field.)

Learn more about  Electron

brainly.com/question/1255220

#SPJ11

The water sample that shows 0.017 grams of the some trace element for the every cubic centimeter of the water. The amount of the trace element has riley collected is 23.5 grams.

The volume of the cylinder of the radius r and the height h is expressed as :

V = πr²h

Where,

The radius, r = 5.7 cm

The height, h = 13.6 cm

The Volume is as :

V = 3.14 × (5.7)² × 13.6

V = 1387.5 cm³

So, if the water sample shows the 0.071 grams trace element for the every cm³ of the water,  the amount of trace element is as :

The amount of trace element = 0.017 x 1387.5

The amount of trace element  = 23.5 grams.

To learn more about trace element here

https://brainly.com/question/30958116

#SPJ4

The pressure in the tank, we can use the Ideal Gas Law equation. The pressure in the tank is 44.8 atm.

To find the pressure in the tank, we can use the Ideal Gas Law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.

First, we need to calculate the total number of moles of gas in the tank: 12.0 moles of hydrogen gas + 4.0 moles of nitrogen gas = 16.0 moles of gas.

Next, we need to convert the volume from liters to cubic meters (m^3), as the gas constant R has units of m^3⋅atm/K⋅mol: 25.0 L = 0.025 m^3.

We also need to convert the temperature from Celsius to Kelvin: 298 K = 25°C + 273.

Now we can plug in the values and solve for pressure:

PV = nRT

P(0.025 m^3) = (16.0 mol)(0.08206 L⋅atm/K⋅mol)(298 K)

P = (16.0 mol)(0.08206 L⋅atm/K⋅mol)(298 K) / (0.025 m^3)

P = 44.8 atm

Therefore, the pressure in the tank is 44.8 atm.

To know more about pressure click here:

https://brainly.com/question/12971272

#SPJ11

The beta - dicarboxylic acids are a type of dicarboxylic acid with two carboxyl groups on adjacent carbon atoms. They are acidic, but their acidity is not significantly different from regular dicarboxylic acids.

A beta - dicarboxylic acid is a type of dicarboxylic acid in which the two carboxylic acid groups (-COOH) are separated by a single carbon atom, making them adjacent to each other on the molecule. In other words, the carboxyl groups are situated at the alpha (first) and beta (second) carbon positions.
Beta-  dicarboxylic acids exhibit acidic properties due to the presence of the carboxylic acid groups. However, the acidity of a beta-dicarboxylic acid is generally not significantly different from that of a regular dicarboxylic acid. The acidic strength of a dicarboxylic acid depends on various factors such as the inductive effect, resonance effect, and the stability of the resulting conjugate base.
In summary, beta-dicarboxylic acids are a type of dicarboxylic acid with two carboxyl groups on adjacent carbon atoms. They are acidic, but their acidity is not significantly different from regular dicarboxylic acids.

Learn more about Beta dicarboxylic acid : https://brainly.com/question/31419666

#SPJ11

Electronegativity on the periodic table typically rises from left to right across a period and falls as you move down a group. Hence, the right response is (B).

Electronegativity rises over time and falls over a group. Because the valence shells of the atoms (metals) at the left of the table are less than halfway full, they tend to lose electrons and have poor electronegativity.

Atoms become more electronegativity as you move from left to right throughout a period. Atoms have a larger nuclear charge and a smaller covalent radius as you progress across the periodic table from left to right.

To learn more about electronegativity visit:

brainly.com/question/17762711

#SPJ1

To determine whether the relative and absolute configurations are retained during a reaction involving a molecule with a stereocenter and another compound we have to first identify the stereocenter followed by determining the relative configuration and absolute configration of it.

If a reaction occurs between a molecule with a stereocenter and another compound, the relative and absolute configurations can be retained by following these steps:

1. Identify the stereocenter: Locate the chiral carbon (the carbon atom attached to four different groups) in the molecule, as this is the center of the stereochemistry.

2. Determine the relative configuration: Compare the arrangement of the substituents around the chiral carbon in the starting molecule and the product. If the priority order (based on atomic number) of the groups remains the same, the relative configuration is retained.

3. Determine the absolute configuration: Assign the absolute configuration (R or S) to the starting molecule's chiral carbon based on the Cahn-Ingold-Prelog priority rules. Perform the same process for the product molecule's chiral carbon. If both have the same R or S configuration, the absolute configuration is retained.

To determine the Absolute configuration:

https://brainly.com/question/31430415

#SPJ11

In Rh⁶⁺ ion there are 45 protons, 39 electrons  and 58 neutrons.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.

There are more or less electrons than protons in an ion.

Learn more about ion,here:

https://brainly.com/question/14982375

#SPJ1

The order from smallest to largest atomic radius is

Be < Mg < Ca < Ba, For Mg and Na, Mg has a smaller atomic radius than Na, so the correct answer is "Mg, Na".

The atomic radius generally increases down a group and decreases across a period in the periodic table. Going from Be to Ba, we are going down Group 2, which means the atomic radius increases. However, within a period, going from left to right, the atomic radius decreases.

The trend in atomic radius across a period is primarily due to increasing nuclear charge as you move from left to right, which attracts the electrons in the outermost energy level closer to the nucleus. This results in a smaller atomic radius.

On the other hand, down a group, the number of energy levels or electron shells increases, which shields the outermost electrons from the attractive force of the nucleus. As a result, the electrons can occupy energy levels farther from the nucleus, leading to an increase in atomic radius.

learn more about atomic radius here:

https://brainly.com/question/18095927

#SPJ11

To determine the identity of the unknown carboxylic acid, I used spectral evidence from both IR and NMR spectra. Here's a step-by-step explanation:

1. IR spectrum analysis: The presence of a carboxylic acid functional group is indicated by a broad and strong peak around 1700-1725 cm⁻¹, which corresponds to the C=O stretching vibration in the carboxylic acid group. Additionally, the broad peak between 2500-3300 cm⁻¹ suggests the presence of the O-H bond in the carboxylic acid.

2. NMR spectrum analysis: In the proton NMR spectrum, the presence of the carboxylic acid group is indicated by a singlet peak between 10-12 ppm, which corresponds to the acidic proton (O-H). The remaining peaks provide information about the rest of the compound's structure, such as the presence of any alkyl or aromatic groups.

3. Analyzing the specific peaks in both the IR and NMR spectra and comparing them to known reference spectra helps to narrow down the possible structures for the unknown carboxylic acid. The consistency of the observed peaks with the expected peaks for a specific carboxylic acid structure allows for the identification of the compound.

In summary, the spectral evidence from both IR and NMR spectra, including the presence of specific peaks associated with the carboxylic acid functional group, helps determine the identity of the unknown carboxylic acid in the experiment.

What is carboxylic acid : https://brainly.com/question/26855500

#SPJ11

The salt formed in the reaction between H₃PO₄ (aq) and Ca(OH)₂ (aq) is calcium phosphate. It is represented by the formula Ca₃(PO₄)₂.

Calcium phosphate is an ionic compound, meaning it is composed of positively charged ions of calcium and negatively charged ions of phosphate. The positively charged calcium ions are attracted to the negatively charged phosphate ions and vice versa, creating a strong electrostatic force between them.

Calcium phosphate is an insoluble salt that does not dissolve in water. It is most commonly found in nature as a major component of bones, teeth, and other hard tissues in animals. It is also used in a variety of industrial and medical applications, such as for the manufacture of pharmaceuticals, dental products, and food processing.

Know more about electrostatic force here

https://brainly.com/question/9774180#

#SPJ11

A chemical equation which obey the law of conservation of mass is known as the balanced chemical equation. According to the law, mass can neither be created nor be destroyed, but can be converted from one form to another.

A chemical equation in which the number of atoms of reactants and products are equal on both sides of the equation is defined as the balanced chemical equation.

The substance which appear on the left hand side of the equation are called the reactants whereas those on the right hand side are called products.

Here the balanced equation is:

N₂H₄ + O₂ → N₂ + 2H₂O

To know more about balanced equation, visit;

https://brainly.com/question/29769009

#SPJ1

Your question is incomplete most probably your full question was:

Balance the equation N₂H₄ + O₂ -> NO₂ + H₂O

The correct answer is a. ΔS univ is negative, ΔS surr is negative, and ΔS sys is positive.

Entropy, the measure of a system's thermal energy per unit temperature that is unavailable for doing useful work. Because work is obtained from ordered molecular motion, the amount of entropy is also a measure of the molecular disorder, or randomness, of a system.

When water freezes at -10°C, the system (water) loses entropy as it becomes more ordered, resulting in a positive ΔS sys. The surroundings (air, container, etc.) gain entropy as they absorb the heat released by the freezing water, resulting in a negative ΔS surr. The overall change in entropy of the universe (system + surroundings) is negative, as energy is transferred from a more disordered state (water) to a less disordered state (surroundings).

To know more about thermodynamic systems and their features, click here:-

https://brainly.com/question/30207871

#SPJ11

Hi! I'd be happy to help you with your question.

1 mole of an ideal gas at STP (Standard Temperature and Pressure) occupies 22.4 liters. So, 1 mole of an ideal gas at STP is 22.4 liters.

1 mole of any substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23 particles. Therefore, 1 mole of any substance = 6.022 x 10^23 particles.

The mass of 1 mole of any substance is equal to its molar mass, which can be found on the periodic table. The molar mass is expressed in grams per mole (g/mol). So, 1 mole of any substance has a mass equal to its molar mass in grams.

To understand what is STP : https://brainly.com/question/2783971

#SPJ11

Metal fuel rods inside a nuclear reactor must be bombarded with neutrons in order to start a chain reaction.

Inside a nuclear reactor, metal fuel rods that contain solid uranium pellets are bombarded with neutrons. The chain reaction that results releases energy and produces more neutrons. Reactors use uranium for nuclear fuel. The uranium is processed into small ceramic pellets and stacked together into sealed metal tubes called fuel rods. Typically, more than 200 of these rods are bundled together to form a fuel assembly.Uranium-235 is the form commonly used for energy production because, unlike uranium-238, its nucleus splits easily when bombarded by a neutron. During fissioning, the uranium-235 atom absorbs a bombarding neutron, causing its nucleus to split apart into two atoms of lighter weight.

Learn more about neutrons here: https://brainly.com/question/28992636

#SPJ11

The rate constants of a certain 1st-order reaction have a half-life reaction at 303 K and 423 K are 2.89 x [tex]10^{-4}[/tex] [tex]s^{-1}[/tex] and 2.89 x [tex]10^{-3}[/tex] [tex]s^{-1}[/tex], respectively.

The half-life of a first-order reaction is given by the equation:

t1/2 = ln(2) / k

where k is the rate constant.

Let's use this equation to find the rate constant at 303 K:

2400 s = ln(2) / k

Solving for k, we get:

k = ln(2) / 2400 s

k ≈ 2.89 x [tex]10^{-4}[/tex] [tex]s^{-1}[/tex]

Now, let's use the same equation to find the rate constant at 423 K:

240 s = ln(2) / k

Solving for k, we get:

k = ln(2) / 240 s

k ≈ 2.89 x [tex]10^{-3}[/tex] [tex]s^{-1}[/tex]

Therefore, the rate constants of the reaction at 303 K and 423 K are 2.89 x [tex]10^{-4}[/tex] [tex]s^{-1}[/tex] and 2.89 x [tex]10^{-3}[/tex] [tex]s^{-1}[/tex], respectively.

Learn more about rate constants at

https://brainly.com/question/14977272

#SPJ4

To convert a secondary alcohol to a ketone, you would need an oxidizing reagent. One commonly used oxidizing reagent for this purpose is chromium (VI) oxide (CrO3) in the presence of a strong acid like sulfuric acid (H2SO4). This reaction is also known as the Jones oxidation.

Here is a step-by-step explanation:

1. Start with a secondary alcohol.
2. Add chromium (VI) oxide (CrO3) as the oxidizing agent.
3. Add a strong acid, such as sulfuric acid (H2SO4), to the reaction mixture.
4. The secondary alcohol will undergo oxidation, forming a ketone as the final product.

To know more about Jones oxidation:

https://brainly.com/question/31316740

#SPJ11