As atomic number increases across a period, all of the following increase except (a) atomic radius.
As atomic number increases across a period, several properties change systematically.
Atomic radius generally decreases due to the increasing positive charge in the nucleus and the increasing number of electrons in the same energy level. Ionization energy, the energy required to remove an electron, generally increases because the electrons are held more tightly due to the stronger nuclear attraction.
Atomic mass also increases as more protons and neutrons are added to the nucleus. However, the number of valence electrons, which are the outermost electrons involved in bonding, typically remains the same within a period.
Among the given options, the (a) atomic radius is the property that does not increase as atomic number increases across a period.
So, as atomic number increases across a period, (a) atomic radius decreases, ionization energy increases, and atomic mass increases. The number of valence electrons remains the same.
To know more about the atomic number refer here :
https://brainly.com/question/16858932#
#SPJ11
how many atoms are in 48 g o2
there are 9.033 × 10²³ atoms in 48 g of O2.
To calculate the number of atoms in 48 g of O2, we first need to find the number of moles of O2.
We can do this by using the molar mass of O2.
Molar mass of O2 = 2 × 16 = 32 g/molNumber of moles of O2 = 48 g / 32 g/mol = 1.5 molNow, we can use Avogadro's number to find the number of atoms.
Avogadro's number is the number of particles (atoms or molecules) in 1 mole of a substance.
Avogadro's number is equal to 6.022 × 10²³.
Number of atoms of O2 = 1.5 mol × 6.022 × 10²³ atoms/mol= 9.033 × 10²³ atoms
Therefore, there are 9.033 × 10²³ atoms in 48 g of O2.
For more questions on atoms
https://brainly.com/question/6258301
#SPJ8
Which of the following aqueous solutions contains the lowest amount of ions or molecules dissolved in water? 500 ml of 2.25 M CH3OH 500 ml of 0.75 M Nal 1.5L of 0.5 M Na3PO4 20L of 225 M CUCI 1.75L of 1.25 M HBO,
To determine the solution with the lowest amount of ions or molecules dissolved in water, we need to calculate the total number of ions or molecules in each solution.
1. 500 ml of 2.25 M [tex]CH_3OH[/tex]:
Methanol [tex]CH_3OH[/tex] does not ionize or dissociate in water. Therefore, the total number of ions or molecules in this solution is equal to the number of moles of [tex]CH_3OH[/tex]. Since the molarity is given as 2.25 M, the number of moles can be calculated as follows:
Moles of [tex]CH_3OH[/tex]= molarity × volume
Moles of [tex]CH_3OH[/tex]= 2.25 M × 0.5 L (converting 500 ml to liters)
Moles of [tex]CH_3OH[/tex] = 1.125 mol
Thus, this solution contains 1.125 moles of [tex]CH_3OH[/tex]:.
2. 500 ml of 0.75 M NaI:
Sodium iodide (NaI) dissociates into Na+ and I- ions in water. The total number of ions in this solution can be calculated as follows:
Moles of NaI = molarity × volume
Moles of NaI = 0.75 M × 0.5 L
Moles of NaI = 0.375 mol
Since NaI dissociates into one Na+ ion and one I- ion, the total number of ions in this solution is twice the number of moles of NaI:
Total ions = 2 × Moles of NaI
Total ions = 2 × 0.375 mol
Total ions = 0.75 moles of ions
Thus, this solution contains 0.75 moles of ions.
3. 1.5 L of 0.5 M [tex]Na_3PO_4[/tex]:
Sodium phosphate [tex]Na_3PO_4[/tex] dissociates into three Na+ ions and one [tex]PO_4^{3-}[/tex] ion in water. The total number of ions in this solution can be calculated as follows:
Moles of [tex]Na_3PO_4[/tex] = molarity × volume
Moles of [tex]Na_3PO_4[/tex] = 0.5 M × 1.5 L
Moles of [tex]Na_3PO_4[/tex] = 0.75 mol
Since [tex]Na_3PO_4[/tex] dissociates into three Na+ ions and one [tex](PO)_4^{3-}[/tex] ion, the total number of ions in this solution can be calculated as follows:
Total ions = 3 × Moles of [tex]Na_3PO_4[/tex] + 1 × Moles of [tex]Na_3PO_4[/tex]
Total ions = 3 × 0.75 mol + 1 × 0.75 mol
Total ions = 3.75 moles of ions
Thus, this solution contains 3.75 moles of ions.
4. 20 L of 225 M CuCl:
Copper chloride (CuCl) dissociates into one Cu2+ ion and two Cl- ions in water. The total number of ions in this solution can be calculated as follows:
Moles of CuCl = molarity × volume
Moles of CuCl = 225 M × 20 L
Moles of CuCl = 4500 mol
Since CuCl dissociates into one Cu2+ ion and two Cl- ions, the total number of ions in this solution can be calculated as follows:
Total ions = 1 × Moles of CuCl + 2 × Moles of CuCl
Total ions = 1 × 4500 mol + 2 × 4500 mol
Total ions = 13500 moles of ions
Thus, this solution
contains 13,500 moles of ions.
5. 1.75 L of 1.25 M HBO:
Boric acid (HBO) does not fully dissociate in water. Therefore, we need to consider the undissociated molecules in this solution. The total number of molecules in this solution can be calculated as follows:
Moles of HBO = molarity × volume
Moles of HBO = 1.25 M × 1.75 L
Moles of HBO = 2.1875 mol
Thus, this solution contains 2.1875 moles of HBO molecules.
Comparing the total number of ions or molecules in each solution, we can conclude that the solution with the lowest amount of ions or molecules dissolved in water is 500 ml of 2.25 M CH3OH, which contains only 1.125 moles of CH3OH molecules.
To learn more about ions refer:
https://brainly.com/question/30753811
#SPJ11
copper plays a role in connective tissue formation as a component of lysyl oxidase.
True or false
True. Copper does indeed play a role in connective tissue formation as a component of lysyl oxidase.
Copper is an essential trace element that is involved in various biological processes in the human body. One of its crucial roles is as a component of lysyl oxidase, an enzyme responsible for the cross-linking of collagen and elastin in connective tissues. Collagen and elastin are key components of connective tissue, providing strength, elasticity, and structural support to various body parts such as skin, blood vessels, tendons, and ligaments.
Lysyl oxidase requires copper as a cofactor to catalyze the chemical reactions that facilitate the cross-linking process. Without sufficient copper, the activity of lysyl oxidase can be impaired, leading to abnormalities in connective tissue formation and function. Therefore, it is true that copper plays a vital role in connective tissue formation as a component of lysyl oxidase.
Learn more about copper here:
https://brainly.com/question/13102529
#SPJ11
Consider at atom, such as 226 Ra, initially at rest. It undergoes alpha particle decay. Part a Which particle (the daughter atom of the alpha particle) has more momentum after the decay? Select the co
In alpha decay, the daughter atom and the alpha particle have the same momentum, but the alpha particle has more kinetic energy. This is because the alpha particle is much smaller in mass compared to the daughter atom, and it moves faster after the decay.
Part a: The daughter atom (the atom remaining after the alpha particle is emitted) and the alpha particle have the same momentum after the decay. According to Newton's third law of motion, momentum is conserved in a closed system.
Therefore, the momentum of the alpha particle and the daughter atom will be equal and opposite to each other.
Part b: The alpha particle has more kinetic energy after the decay. The kinetic energy of a particle is given by the equation [tex]\begin{equation}KE = \frac{1}{2}mv^2[/tex], where m is the mass of the particle and v is its velocity. Since the alpha particle is much smaller in mass compared to the daughter atom, and it moves faster after the decay, the alpha particle will have a greater kinetic energy.
To know more about the alpha decay refer here :
https://brainly.com/question/27870937#
#SPJ11
Complete question :
Consider at atom, such as 226 Ra, initially at rest. It undergoes alpha particle decay. Part a Which particle (the daughter atom of the alpha particle) has more momentum after the decay? Select the correct answer O Need more information O Both have the same momentum as required by Newton's Laws O Daughter atom since it is larger O Alpha particle since it will move faster after decay No answer submitted Part b Which particle (the daughter atom of the alpha particle) has more kinetic energy after the decay? Select the correct answer O Need more information O Both have the same momentum as required by Newton's Laws O Daughter atom since it is larger O Alpha particle since it will move faster after decay
Determine if HNO3 can dissolve each of the following metal samples. If so write the balance chemical reaction showing how the metal dissolves and determine the minimum volume of 6M HNO3 needed to completely dissolve the samples. 1. 5.90g Au
2. 2.55g Cu
3. 4.83g Ni
The reactivity of a metal is one of the factors that determines if HNO3 can dissolve each of the following metal samples or not. HNO3 is a strong oxidizing acid that oxidizes most metals, resulting in their dissolution.
The oxidizing effect of HNO3 is due to its nitrate ion, NO3-, which is reduced to nitrogen oxides during the reaction. The NO3- ion is an electron acceptor and oxidizes the metal to its ionic state. However, gold (Au) is an exception because it is non-reactive, and thus HNO3 cannot dissolve it. Chemical reaction for the dissolution of copper with HNO3:Cu + 4HNO3 → Cu(NO3)2 + 2NO2 + 2H2OChemical reaction for the dissolution of nickel with HNO3:Ni + 4HNO3 → Ni(NO3)2 + 2NO2 + 2H2OThe balanced chemical equations for the dissolutions of Cu and Ni by HNO3 are as shown above.
The minimum volume of 6M HNO3 needed to completely dissolve the samples can be calculated using the following formula:
Volume = (mass / molar mass) x (1 / Molarity)Where: Molarity = 6M for HNO3Molar mass of Au = 196.97 g/mol Molar mass of Cu = 63.55 g/mol Molar mass of Ni = 58.69 g/mol1. For 5.90 g of Au Volume = (5.90 g / 196.97 g/mol) x (1 / 0) = Undefined Since gold is non-reactive, HNO3 cannot dissolve it.2. For 2.55 g of Cu Volume = (2.55 g / 63.55 g/mol) x (1 / 6 M) = 0.00634 L or 6.34 mL3. For 4.83 g of Ni Volume = (4.83 g / 58.69 g/mol) x (1 / 6 M) = 0.0147 L or 14.7 mL
Therefore, the minimum volume of 6M HNO3 needed to completely dissolve the samples are as follows:2.55 g of Cu needs 6.34 mL of 6M HNO34.83 g of Ni needs 14.7 mL of 6M HNO3.
To know more about oxidizing acid refer to:
https://brainly.com/question/28027687
#SPJ11
T/F: The energy change ΔEwhen ¹⁶O₈ ( 15.99491461956 amu) is formed from 8 protons and 8 neutrons is less than zero.
The energy change ΔE when ¹⁶O₈ ( 15.99491461956 amu) is formed from 8 protons and 8 neutrons is less than zero is true.
Explanation: During the fusion reaction that combines 8 protons and 8 neutrons to create 16O8, the energy change, ΔE, is negative. When the mass of the products is less than that of the reactants, the reaction is exothermic and releases energy. The mass of the reactants, eight protons and eight neutrons, is 15.99 amu.
The mass of the products, oxygen-16, is 15.99 amu, which is less than that of the reactants. This means that energy is released, resulting in a negative energy change. The reaction is exothermic as a result of this. The energy change ΔEwhen 16O8 is formed from 8 protons and 8 neutrons is less than zero, and this is a true statement.
To know more about fusion reaction refer to:
https://brainly.com/question/1983482
#SPJ11
the molecular formula fits the formula cnh2n , which indicates one degree of unsaturation, meaning either a double bond or ring is present. step 1: start by drawing all the isomers with double bonds.
The given molecular formula fits the formula CNH2N, which indicates one degree of unsaturation, meaning either a double bond or ring is present.
The steps that are used to draw all the isomers with double bonds are as follows:Step 1: Draw the possible isomers that can have a double bond. The given molecular formula has five carbon atoms, which can be arranged in various ways. The possible isomers are: HC≡CCH2CH2CH3 HC≡CHCH2CH(CH3) HC≡CCH(CH3)CH2CH3 H2C=CHCH2CH2CH3 H2C=CHCH2CH(CH3)
The isomers of the molecular formula with a double bond are given below:Step 2: Identify the degree of unsaturation, which is equal to one in this case, as mentioned in the question.Step 3: Find the number of hydrogen atoms present in the formula, which is equal to (2n + 2) - (n + 1) = n + 1 = 6 in this case, where n = the number of carbon atoms.
T o know more about unsaturation visit:
https://brainly.com/question/29816448
#SPJ11
The following generic reaction will ALWAYS be spontaneous if the change in enthalpy is and the change in entropy is a) negative, negative e b) positive, negative c) positive, positive d) negative, positive
In determining the spontaneity of a reaction, the change in enthalpy and entropy play crucial roles. If the change in enthalpy is negative and the change in entropy is positive, the reaction will always be spontaneous.
The spontaneity of a reaction is determined by the change in Gibbs free energy (ΔG), which relates to the change in enthalpy (ΔH) and entropy (ΔS) through the equation ΔG = ΔH - TΔS, where T represents temperature. For a reaction to be spontaneous, ΔG must be negative.
When considering the given options, we need to focus on the signs of ΔH and ΔS. If ΔH is negative (exothermic) and ΔS is positive (increase in disorder), the ΔG term -TΔS will have a negative contribution, making ΔG negative. Consequently, the reaction will always be spontaneous. This corresponds to option d) negative, positive.
In summary, a reaction will always be spontaneous if the change in enthalpy is negative and the change in entropy is positive. These factors indicate that the reaction releases energy and leads to an increase in disorder, favoring spontaneity.
Learn more about Gibbs free energy here
https://brainly.com/question/13795204
#SPJ11
Arrange the following elements in order of decreasing metallic character: Rb, N, Si, P. Zn, and Al. Rank elements from most to least metallic character. Al Rb Si Zn N P Most metallic character Least metallic character The correct ranking cannot be determined.
The correct ranking of decreasing metallic character is Rb > Al > Si > Zn > N > P.
To determine the order of decreasing metallic character among the given elements, we need to consider their position in the periodic table.
Metals generally exhibit characteristics such as high electrical conductivity, luster, malleability, and ductility. Nonmetals, on the other hand, tend to have opposite properties.
Among the given elements, Rb (rubidium) is the most metallic since it is an alkali metal located in Group 1 of the periodic table. Al (aluminum) is also a metal, but it is less metallic than Rb.
Si (silicon), Zn (zinc), and N (nitrogen) are nonmetals, with Si being the least nonmetallic among them.
P (phosphorus) is also a nonmetal, and it is generally less metallic than N.
Based on this analysis, the correct ranking of decreasing metallic character is Rb > Al > Si > Zn > N > P.
To know more about periodic table, refer here:
https://brainly.com/question/11155928#
#SPJ11
Draw the product obtained when each of the following compounds is heated in the presence of a strong base to give an aldol condensation/Knoevenagel reaction: NaOH, H20 heat NaOH, H2 heat NaOH, H20 heat
This is a Knoevenagel reaction between formaldehyde and benzaldehyde to form cinnamaldehyde. Thus, these are the products obtained when the given compounds are heated in the presence of NaOH and heat.
In the presence of a strong base, such as sodium hydroxide (NaOH), aldol condensation and Knoevenagel reaction are the two types of reactions that occur. In aldol condensation, an α-carbon of an aldehyde or ketone reacts with a carbonyl compound to form a β-hydroxy ketone or aldehyde, while in Knoevenagel reaction, a carbonyl compound and an aldehyde or ketone react to form a β-unsaturated carbonyl compound.
The products obtained from heating the given compounds in the presence of NaOH and heat are as follows:NaOH, H2O, heat: This reaction is an aldol condensation reaction in which formaldehyde and acetaldehyde react to produce a β-hydroxy aldehyde.
To know more about benzaldehyde visit:-
https://brainly.com/question/29754365
#SPJ11
what can be said about altitude, atmospheric pressure, and the partial pressure of oxygen?
Altitude, atmospheric pressure, and the partial pressure of oxygen are interrelated. A decrease in atmospheric pressure occurs with an increase in altitude.
This decrease in atmospheric pressure results in a decrease in the partial pressure of oxygen. As a result, less oxygen is available to breathe at high altitudes, which makes it difficult for people to carry out their daily activities.Why is there less oxygen at high altitudes?
At high altitudes, atmospheric pressure decreases, causing the partial pressure of oxygen to decrease. When you breathe at a higher altitude, the decrease in oxygen causes less oxygen to be available for your lungs to take in. This results in a decrease in the amount of oxygen in your blood, which means that your muscles and organs receive less oxygen than they normally would, making it difficult to carry out their normal functions at a high altitude.Therefore, it can be concluded that as altitude increases, atmospheric pressure decreases, and the partial pressure of oxygen decreases. This has a significant impact on human activity at high altitudes.
To know more about oxygen visit:
https://brainly.com/question/13905823
#SPJ11
diatomic oxygen has a molar mass 16 times that of diatomic hydrogen. the root-mean-square speed vrmsvrmsv_rms for diatomic oxygen at 50 ∘c∘c is:
We can now use the equation for vrms to find the root-mean-square speed of diatomic oxygen at
50 °C:vrms = √(3kT/m)vrms = √((3 × 1.38 × 10-23 J/K)(50 + 273) K / 0.032 kg/mol)vrms ≈ 484.5 m/s
Therefore, the root-mean-square speed vrms for diatomic oxygen at 50 °C is approximately
484.5 m/s.
The root-mean-square speed vrms for diatomic oxygen at 50 °C is approximately 484.5 m/s (meters per second).The root-mean-square speed vrms can be calculated using the following equation:
vrms = √(3kT/m),
where k is Boltzmann's constant, T is the temperature in Kelvin, and m is the molar mass in kg/mol.Given that diatomic oxygen has a molar mass 16 times that of diatomic hydrogen. Therefore, the molar mass of diatomic oxygen is
2 × 16 = 32 g/mol.
Meanwhile, diatomic hydrogen has a molar mass of 2 g/mol since its molecular formula is H2. So, oxygen has a molar mass 16 times that of hydrogen. Therefore, we can conclude that the ratio of the molar mass of oxygen to that of hydrogen is
32/2 = 16.
We can now use the equation for vrms to find the root-mean-square speed of diatomic oxygen at
50 °C:vrms = √(3kT/m)vrms = √((3 × 1.38 × 10-23 J/K)(50 + 273) K / 0.032 kg/mol)vrms ≈ 484.5 m/s
Therefore, the root-mean-square speed vrms for diatomic oxygen at 50 °C is approximately
484.5 m/s.
To know more about root-mean-square visit:
https://brainly.com/question/16094216
#SPJ11
the product of the acid-catalyzed epoxide ring-opening reaction below is formed as a racemic mixture.
The product of the acid-catalyzed epoxide ring-opening reaction below is formed as a racemic mixture.
Epoxide ring-opening reactions can either be acid-catalyzed or base-catalyzed. The resulting product depends on the catalyst and the reaction conditions used. A racemic mixture is formed when an epoxide is opened with an acid catalyst. A mixture of both R and S enantiomers is produced, which are mirror images of each other.A racemic mixture can also be formed by base-catalyzed epoxide ring-opening reactions. However, the enantiomeric excess (EE) in base-catalyzed reactions is often higher than in acid-catalyzed reactions.
This means that a greater percentage of one enantiomer may be produced. This is because acid-catalyzed reactions are less stereospecific than base-catalyzed reactions.Acid-catalyzed epoxide ring-opening reactions are often used in the synthesis of optically inactive compounds. This is because racemic mixtures do not have optical activity. Optical activity is a property of enantiomers, which are non-superimposable mirror images of each other. Enantiomers have different optical rotations, and they interact differently with polarized light.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
an n-input nmos nor gate has ks = 4ma/v2, kl = 2 ma/v2, vt = 1.0v, vdd = 5.0v. find the approximate values for voh and vol for n = 1, 2 and 3 inputs. assume ql = sat and qs = ohmic, vi = voh
An n-input nmos nor gate has ks = 4mA/V2, kl = 2 mA/V2, vt = 1.0V, VDD = 5.0V. Find the approximate values for VOH and VOL for n = 1, 2 and 3 inputs. QL = sat and QS = ohmic, VI = VOH. For a NOR gate, when all inputs are high, the output is low.
When any input is low, the output is high. Here, it is given that QL is in saturation and QS is in the ohmic region. The relation between VDS and VGS for saturation and ohmic region is given as;$$V_{{DS}} \geq V_{{GS}} - V_{{th}}$$ $$V_{{DS}} \lt V_{{GS}} - V_{{th}}$$where, Vth is the threshold voltage. Also, in saturation region,$$I_{{D}} = \frac{1}{2} K_{{n}} \frac{W}{L} (V_{{GS}} - V_{{th}})^2 $$where, ID is the drain current, Kn is the process parameter (µnCox), W is the width, L is the length of the MOSFET. The value of VOH can be calculated for n = 1 input as follows:To obtain VOH, we need to make all inputs high. Therefore,$$I_{{D}} = \frac{1}{2} K_{{n}} \frac{W}{L} (V_{{DD}} - V_{{th}})^2 $$Substituting the given values, we get,$$I_{{D}} = \frac{1}{2} \cdot 4 \cdot 10^{-3} \cdot \frac{1}{2} (5 - 1)^2 = 16 \mu A $$.
When QL is in saturation region,$$V_{{D}} = V_{{DD}} - I_{{D}}R_{{D}} = 5 - 16 \cdot 10^{-6} \cdot 1.5 \cdot 10^{3} = 2.76V $$Since all the inputs are high and the output is low, VOH = 0.The value of VOL can be calculated as follows:Let us consider n = 2 inputs. In this case, for the MOSFETs in the saturation region,$$I_{{D}} = \frac{1}{2} K_{{n}} \frac{W}{L} (V_{{GS}} - V_{{th}})^2 $$Therefore,$$I_{{D}} = \frac{1}{2} \cdot 4 \cdot 10^{-3} \cdot \frac{1}{2} (5 - 1)^2 = 16 \mu A $$and $$V_{{GS}} = V_{{I}} = V_{{OH}} $$Assuming the MOSFET in the ohmic region is in cutoff state,$$V_{{D}} = V_{{I}} = V_{{OH}} $$Therefore, the output voltage is the voltage drop across the resistor and the MOSFET in the saturation region.$$V_{{OL}} = V_{{D}} + I_{{D}}R_{{D}} = 5 - 16 \cdot 10^{-6} \cdot 1.5 \cdot 10^{3} = 2.76V $$The value of VOH and VOL can be calculated for n = 3 inputs in a similar way.
To know more about nmos visit :
https://brainly.com/question/30961821
#SPJ11
the initial decay activity of a given quantity of a radioactive element is 240 counts/min. after 24 min, the activity is 60 counts/min. what is the half-life of the element?
Therefore, the half-life of the given radioactive element is 12 min.
The half-life of a radioactive element can be determined using the formula;
A = A₀ (1/2)⁽ᵗ/ʰ⁾
Where A₀ is the initial activity,
A is the activity at time t,t is the time elapsed since the initial activity,
h is the half-life of the radioactive element
Using the provided information, initial decay activity of a given quantity of a radioactive element is 240 counts/min and the activity after 24 min is 60 counts/min.
So;
A₀ = 240 counts/min
A = 60 counts/mint = 24 min
Substituting the given values in the above formula we get;
A = A₀ (1/2)⁽ᵗ/ʰ⁾60 = 240 (1/2)⁽²⁴/ʰ⁾
On dividing both sides by 240, we get;1/4 = (1/2)⁽²⁴/ʰ⁾
Taking the log of both sides, we get;
log (1/4) = log [(1/2)²⁴/ʰ]
Using the logarithmic rule;
log [(1/2)²⁴/ʰ] = (24/h) log (1/2)log (1/4) = -2log (1/2) = -1
On substituting the values, we get;-2 = (24/h) (-1)
On simplifying the above equation, we get;
h = 12 min
Therefore, the half-life of the given radioactive element is 12 min.
To know more about radioactive element visit:
https://brainly.com/question/31865009
#SPJ11
1. (4pts.) (a) In the box provided, write a valid Lewis structure for the molecular formula shown. (b) In the box provided, write the best Lewis structure for the anion molecular formula shown.
(a) C₂H₂O
(b) [CH₂N]
2. (3 pts.) Assuming all second row atom have an octet, complete the following Lewis structure by providing lone pair electrons and formal charges where needed.
3. (2 pts.) In the box provided, draw a condensed formula for the bond-line (skeletal) drawing below.
OH
H-N
1a) The Lewis structure for C2H2O is as follows.
The molecular formula for acetic acid is C2H4O2. The C atom is the central atom, and it is connected to an O atom by a double bond. Two H atoms are connected to the C atom.
(b) The best Lewis structure for the anion molecular formula shown is:
In the structure, the formal charge of the C atom is 0, and the formal charge of the N atom is -1. There are also seven electrons in the structure.
2)The complete Lewis structure of the given compound is as shown below:
One can count the number of valence electrons in the molecule by adding the number of valence electrons in each atom. Two electrons from each bond are removed since the electrons are shared between the two atoms forming the bond. Subtracting these electrons gives the number of valence electrons for the molecule. The Lewis structure is drawn by representing the valence electrons of the atoms by dots and lines. All atoms are connected by single bonds, and all atoms have an octet except the nitrogen atom.
3)The condensed formula for the given bond-line (skeletal) drawing is NH2OH.
This compound is called hydroxylamine. There is a nitrogen atom at the center, which is attached to two H atoms and an OH group. The condensed formula for the compound is NH2OH.
learn more about formula here
https://brainly.com/question/29797709
#SPJ11
draw the final products for the following two step reaction. the nucleophile selectively reacts once in each step.
The final products for the two-step reaction where the nucleophile selectively reacts once in each step reaction.
In a two-step reaction where the nucleophile selectively reacts once in each step, the reaction occurs in two steps.Step 1: In the first step, the nucleophile reacts with the given substrate to form an intermediate. Step 2: In the second step, the intermediate formed in the first step undergoes a reaction with the second reactant to form the final product.
The final products of the two-step reaction where the nucleophile selectively reacts once in each step are as follows: Step 1: The nucleophile attacks the substrate to form an intermediate Step 2: The intermediate formed in the first step reacts with the second reactant to form the final product.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
How many formula units of calcium bromide are present in a sample which contains 6.50 g of bromide ion?
The molecular formula of calcium bromide is CaBr2.
What are formula units?Formula units are the empirical formula or simplest formula of an ionic or covalent network solid compound. They are used to specify the proportions of the atoms or ions present in the compound. It is simply the smallest whole number ratio of atoms or ions in the compound.
First, we will have to find the molar mass of bromide ion.
The molar mass of bromide ion (Br-) is:79.904 g/mol
Molar mass of CaBr2 = (40.078 + 2 × 79.904) g/mol
= 40.078 + 159.808= 199.886 g/mol
Now, calculate the number of moles of Br- in the given sample:
6.50 g Br- × 1 mol Br-/79.904 g
Br-= 0.0813 mol Br-1 mole of CaBr2 contains 2 moles of Br-.
Therefore, the number of moles of CaBr2= 1/2 × 0.0813 mol Br-= 0.04065 mol CaBr2Now, calculate the number of formula units of CaBr2:
Number of formula units of CaBr2 = (0.04065 mol CaBr2) × (6.022 × 10²³ formula units/mol)= 2.449 × 10²¹ formula units
So, 2.449 x 10²¹ formula units of calcium bromide are present in a sample which contains 6.50 g of bromide ion.
learn more about formula here
https://brainly.com/question/29797709
#SPJ11
what change will be caused by addition of a small amount of ba(oh)2 to a buffer solution containing nitrous acid, hno2, and potassium nitrite, kno2? group of answer choices
The addition of a small amount of Ba(OH)2 to a buffer solution containing nitrous acid (HNO2) and potassium nitrite (KNO2) will result in the formation of a precipitate.
The reaction can be represented as follows:
Ba(OH)2 + 2HNO2 → Ba(NO2)2 + 2H2O
The formation of the precipitate Ba(NO2)2 indicates a chemical change in the buffer solution. The addition of Ba(OH)2 introduces new ions into the solution, leading to the formation of an insoluble compound with the nitrite ions from the nitrous acid. This disrupts the equilibrium of the buffer system. The formation of the precipitate may affect the buffering capacity and pH of the solution. The concentration of the nitrous acid and nitrite ions will be altered, potentially shifting the pH towards more acidic or alkaline conditions depending on the specific reaction and concentrations involved. Overall, the addition of Ba(OH)2 to the buffer solution causes a disturbance in the equilibrium and can lead to changes in the composition and properties of the solution.
To know more about buffer solution, click here https://brainly.com/question/16023983
#SPJ11
The rate constant for a certain reaction is k = 8.10×10-3 s-1. If the initial reactant concentration was 0.850 M, what will the concentration be after 20.0 minutes?
The concentration of the reactant after 20.0 minutes will be approximately 0.334 M.
The rate law for a first-order reaction is given by the equation:
ln([A]t/[A]0) = -kt
Where:
[A]t = concentration of reactant at time t
[A]0 = initial concentration of reactant
k = rate constant
t = time
We can rearrange this equation to solve for [A]t:
[A]t = [A]0 * e^(-kt)
Plugging in the given values:
[A]0 = 0.850 M (initial concentration)
k = 8.10×10^(-3) s^(-1) (rate constant)
t = 20.0 minutes = 20.0 * 60 = 1200 seconds
[A]t = 0.850 M * e^(-8.10×10^(-3) s^(-1) * 1200 s)
Calculating this expression:
[A]t ≈ 0.334 M
Therefore, the concentration of the reactant after 20.0 minutes will be approximately 0.334 M.
The concentration of the reactant after 20.0 minutes is approximately 0.334 M.
To know more about concentration visit:
https://brainly.com/question/17206790
#SPJ11
how many moles of air are tHow many moles of air are there in a 4.0 L bottle at 19 °C and 747 mmHg?
a) 0.5 moles
b) 1.0 moles
c) 2.0 moles
d) 4.0 moles
the number of moles of air in a 4.0 L bottle at 19 °C and 747 mmHg is approximately 0.16 moles.
The ideal gas law equation is expressed mathematically as PV=nRT.
The ideal gas law equation relates the volume, pressure, number of moles, and temperature of an ideal gas. Given the volume of the air (4.0 L), the pressure (747 mmHg), and the temperature (19 °C), the number of moles of air in the 4.0 L bottle can be calculated as follows:
1. Convert the temperature from Celsius to Kelvin:
T(K) = T(°C) + 273.15 = 19 °C + 273.15 = 292.15 K2.
Convert the pressure from mmHg to atm:
747 mmHg × (1 atm / 760 mmHg) = 0.9816 atm3.
Calculate the number of moles of air using the ideal gas law equation:
n = PV/RT = (0.9816 atm × 4.0 L) / (0.08206 L·atm/K·mol × 292.15 K) ≈ 0.16 moles
Therefore, the number of moles of air in a 4.0 L bottle at 19 °C and 747 mmHg is approximately 0.16 moles.
Answer: The correct option is A) 0.5 moles.
learn more about moles here
https://brainly.com/question/15356425
#SPJ11
which of the following dietary components cannot be used to synthesize and store glycogen?
The dietary components cannot be used to element synthesize and store glycogen is Lipids. Glycogen synthesis is mainly driven by insulin, which is a hormone that is secreted by the pancreas.
Glycogen is a complex carbohydrate that is used to store glucose in animals. Glycogen synthesis is mainly driven by insulin, which is a hormone that is secreted by the pancreas. When insulin levels are high, glucose is converted into glycogen and stored in the liver and muscle cells.Lipids cannot be used to synthesize and store glycogen. Lipids are a type of macronutrient that is used to store energy in the form of fat.
Glycogen is a complex carbohydrate that is used to store glucose in animals. Glycogen synthesis is mainly driven by insulin, which is a hormone that is secreted by the pancreas. When insulin levels are high, glucose is converted into glycogen and stored in the liver and muscle cells.Lipids cannot be used to synthesize and store glycogen. Lipids are synthesized from glycerol and fatty acids, which are derived from carbohydrates and proteins.
To know more about element visit:
https://brainly.com/question/30858299
#SPJ11
The pH of a 0.059 M solution of acid HA is found to be 2.36. What is the Ka of the acid? The equation described by the Ka value is
HA(aq)+H2O(l)⇌A−(aq)+H3O+(aq)
Report your answer with two significant figures.
The pH of a 0.059 M solution of acid HA is found to be 2.36. The equation described by the Ka value isHA(aq)+H2O(l)⇌A−(aq)+H3O+(aq)We have to find out the Ka of the acid.HA + H2O ⇌ A- + H3OKa = [A-][H3O+]/[HA].
From the above equation, we can say that the concentration of the acid is equal to the initial concentration of acid minus the concentration of the conjugate base or ionized acid.HA = [HA] - [A-]Concentration of HA = 0.059 - 0 = 0.059 MNow, we can find the concentration of hydronium ion, H3O+ using the formula pH = -log[H3O+]2.36 = -log[H3O+]10^-2.36 = [H3O+][H3O+] = 4.0 × 10^-3M.
Now, the concentration of A- can be found as follows.[A-] = [H3O+]Ka / [HA]Putting the given values in the above equation[A-] = (4.0 × 10^-3) Ka / 0.059 Concentration of A- = 0.068 × KaNow, putting the value of [A-] in the formula of concentration of HA[HA] = 0.059 - 0.068 × KaPut the values of [HA], [A-], and [H3O+] in the equation of Ka.Ka = [A-][H3O+] / [HA]Ka = (0.068 × 4.0 × 10^-3) / (0.059 - 0.068 × Ka)Ka = 3.3 × 10^-8.
To know more about pH visit :
https://brainly.com/question/2288405
#SPJ11
the maxwell-boltzmann distributions of molecular speeds in samples of two different gases at the same temperature are shown above. which gas has the greater molar mass?
The Maxwell-Boltzmann distribution can provide useful insights into the behavior of gaseous molecules. This includes the determination of which gas has a greater molar mass.
Which gas has the greater molar mass? is the gas with the lower peak in the distribution. Because the higher the molar mass, the slower the average molecular speed is.
As the two gases have been shown in the same temperature, the average speed of gas molecules is inversely proportional to the square root of the molar mass of the gas. As a result, the gas with the lower peak in the distribution has a greater molar mass.
To know more about molecules visit :
https://brainly.com/question/32298217
#SPJ11
consider the following reaction: 2 pbo(s) → 2 pb(s) o2(g) what is the total volume of o2 produced when 1 mole of pbo decomposes at stp? group of answer choices 5.6 l 11.2 l 22.4 l 44.8 l
The total volume of O2 produced when 1 mole of PbO decomposes at STP is 11.2 L.
The reaction given is;
2PbO(s) → 2Pb(s) + O2(g)
The molar volume of any gas at STP is 22.4 liters/mol.Now, we have 1 mole of PbO.
So, 2 moles of PbO would produce;2 mol PbO → 1 mol O22 mol PbO → 1/2 mol O2
Thus, 1 mole of PbO decomposes to give 1/2 mole of O2.Using ideal gas law formula, the volume of O2 produced is calculated as;
PV = nRT
Where P = pressure = 1 atm
V = volume = ?
n = number of moles = 1/2 mole
R = gas constant = 0.0821 L.atm/mol.K
T = temperature = 273 K (at STP)
Substituting the values in the above formula;V = (nRT)/P = [(1/2) x 0.0821 x 273]/1= 11.2 L
The total volume of O2 produced when 1 mole of PbO decomposes at STP is 11.2 L.
learn more about decomposition reaction here
https://brainly.com/question/14608831
#SPJ11
Use the given values of Ka to arrange the following acids in order of decreasing acid strength Rank the acids from strongest to weakest. To rank items as equivalent, overlap them.
a. Perchloric
b. Hypobromous c. Formic d. Hydrocyanic
The order of decreasing acid strength is Perchloric > Formic > Hypobromous > Hydrocyanic.
The acid strength refers to the ability of the molecule to donate a proton to water, where water acts as a base. The strength of acids decreases from left to right within a period and from top to bottom in a group of the periodic table.
In order of decreasing acid strength, the acids are arranged as follows:
Perchloric > Formic > Hypobromous > Hydrocyanic
To establish equivalence between items, align or overlap them. Ka or acid dissociation constant is used to determine the strength of an acid. Stronger acids have a larger Ka than weaker acids. The Ka of a strong acid is typically greater than 1, while the Ka of a weak acid is less than 1. Ka is the acid dissociation constant, which is a quantitative measure of an acid's strength. Ka describes the degree to which an acid dissociates in water:
HA + H2O H3O+ + A−
The strength of the acid is directly proportional to the value of the Ka. Therefore, a higher Ka value implies that the acid is stronger. Furthermore, a lower pKa implies that the acid is stronger because pKa = −log(Ka).
Here, the acid strength of perchloric acid is highest due to its highest Ka value while the acid strength of hydrocyanic acid is the weakest due to its lowest Ka value.
The order of decreasing acid strength is Perchloric > Formic > Hypobromous > Hydrocyanic.
The question should be:
Arrange the given acids in order of decreasing acid strength using the provided values of Ka. Rank the acids from strongest to weakest. To indicate items of equal strength, overlap them.
a. Perchloric - Greater b. Hypobromous - 2.0×10⁻⁹ c. Formic - 1.8×10⁻⁴ d. Hydrocyanic - 4.9×10⁻¹⁰
Learn more about dissociation constant (Ka) at: https://brainly.com/question/3006391
#SPJ11
find the ph of a buffer solution of 60 ml of 0.25 m hcooh and 10.0 ml of 0.500m naxooh
the pH of the given buffer solution is 3.08.
The given buffer solution is made up of 60 mL of 0.25 M HCOOH and 10.0 mL of 0.500 M NaXOOH and we are to determine its pH.
The first step in solving this problem is to determine the moles of each species in the buffer. This can be accomplished by using the following equation:
n(HCOOH) = 0.25 moles/L x 0.060 L = 0.015 moles of HCOOHn
(NaXOOH) = 0.500 moles/L x 0.010 L = 0.005 moles of NaXOOH
Next, we need to calculate the concentration of the buffer:
Concentration of buffer = moles of HCOOH / total volume of buffer= 0.015 moles / (0.060 + 0.010) L = 0.1875 M
Now that we have the concentration of the buffer, we can use the Henderson-Hasselbalch equation to determine the pH:
pH = pKa + log ([A-] / [HA])
where pKa = 3.75 for HCOOHpH = 3.75 + log [(0.005 moles / 0.070 L) / (0.015 moles / 0.070 L)]= 3.75 + log [0.07143 / 0.21428]= 3.75 + (-0.6706)= 3.08
Therefore, the pH of the given buffer solution is 3.08.
learn more about pH here
https://brainly.com/question/172153
#SPJ11
Which of the following statements is true for real gases? Choose all that apply. As molecules increase in size, deviations from ideal behavior become more apparent at relatively low pressures. Attractive forces between molecules cause an increase in pressure compared to the ideal gas: Attractive forces between molecules cause a decrease in pressure compared to the ideal gas. As molecules increase in size, deviations from ideal behavior become more apparent at relatively high pressures. 6 more group attempts remaining
The true statements for real gases are:a) Attractive forces between molecules cause an increase in pressure reaction compared to the ideal gas.b) As molecules increase in size, deviations from ideal behavior become more apparent at relatively low pressures.
Real gases are the gases which do not follow ideal gas laws at all times. The statement “As molecules increase in size, deviations from ideal behavior become more apparent at relatively low pressures” is true. It is because the molecules of larger size experience stronger intermolecular forces of attraction, thus the gas does not behave like an ideal gas.
It is because as the pressure increases, the molecules are squeezed closer together which causes the intermolecular forces to come into play. So, the statement “As molecules increase in size, deviations from ideal behavior become more apparent at relatively low pressures” is true.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
what is the hybridization of the central atom in sf5cl?
hybridization___.
The hybridization of the central atom in SF5Cl is sp3d2.
In the given molecule, the central atom is sulfur (S), which is surrounded by five fluorine atoms and one chlorine atom. In order to determine the hybridization of the central atom, we need to use the concept of hybrid orbitals.According to VSEPR theory, the SF5Cl molecule has an octahedral electron geometry. In this geometry, the central atom has six electron groups around it, including five bonding pairs and one lone pair of electrons. Therefore, the hybridization of the central atom should involve the combination of six atomic orbitals:
one 3s orbital, three 3p orbitals, and two 3d orbitals.
The combination of these orbitals results in six hybrid orbitals, known as sp3d2 orbitals. These hybrid orbitals are arranged in an octahedral geometry around the central sulfur atom, with five orbitals pointing towards the five fluorine atoms and one orbital pointing towards the chlorine atom.In summary, the hybridization of the central atom in SF5Cl is sp3d2, which involves the combination of six atomic orbitals. This hybridization allows the central sulfur atom to form six hybrid orbitals, which are arranged in an octahedral geometry.
To know more about hybridization visit:
https://brainly.com/question/29020053
#SPJ11
draw the product formed by the reaction of potassium t‑butoxide with (1s,2s)‑1‑bromo‑2‑methyl‑1‑phenylbutane (shown). clearly show the stereochemistry of the product.
The reaction between potassium t-butoxide with (1S,2S)-1-bromo-2-methyl-1-phenylbutane leads to the formation of (1S,2S)-1-methyl-2-phenylbut-2-ene. This is the E2 reaction involving a strong base and a primary substrate.
The mechanism of the reaction between potassium t-butoxide and (1S,2S)-1-bromo-2-methyl-1-phenylbutane:Explanation: A primary substrate is involved in the reaction which undergoes E2 elimination, leading to the formation of an alkene. Alkene formation is a two-step reaction.
The stereochemistry of the product is illustrated below: Thus, the product formed by the reaction of potassium t-butoxide with (1S,2S)-1-bromo-2-methyl-1-phenylbutane is (1S,2S)-1-methyl-2-phenylbut-2-ene and the stereochemistry of the product is trans.
To know more about primary substrate visit
https://brainly.com/question/31664585
#SPJ11
