asset question.....only answers otherwise u will be reported ​

Knowing that the momentum(p) of an object is directly (when one number goes up the other will too) related to both the mass and velocity of an object or p=mv, two rolling bowling balls of different masses can have the same momentum because the one with the lower mass, has a higher velocity. The higher velocity of an object would make up for the lower mass and vice versa.

Answer:

Sample Response: Momentum is equal to the mass of an object multiplied by the velocity of an object. The two bowling balls can have the same momentum if the bowling ball with less mass has a higher velocity, and vice versa. As long as the product of the mass and velocity of one bowling ball is equal to the product of the mass and velocity of the other, the bowling balls will have the same momentum.

Explanation:

Answer:

B. 5, 1, 4, 3, 6, 2

Explanation:

Acetylcholine (ACh) is a molecule that functions as a neurotransmitter and plays diverse roles in brain and muscle function. Ach is released by the presynaptic neurons into the synaptic cleft. The nicotinic acetylcholine receptors are ACh ligand-gated ion channels located at the postsynaptic membrane which admit both sodium (Na+) and potassium (K+) ions. These receptors bind ACh, increasing the permeability of the postsynaptic membrane to Na+ and K+ ions. In consequence, ion channels open and sodium (Na+) ions enter the postsynaptic cell, causing the postsynaptic membrane to depolarize. An enzyme known as acetylcholinesterase breaks down acetylcholine into acetate and choline. If depolarization passes a threshold potential, an action potential is generated in the postsynaptic membrane. The generation of a postsynaptic potential at the excitatory synapse is known as excitatory postsynaptic potential. Once depolarization is complete, Na+ channels close and membrane permeability to Na+ ions declines to the resting levels.

Answer:

x = 4.85 cm

Explanation:

From work energy theorem when dealing with a spring in compression, we know that total work done is;

W_t = ½kx²

Where;

k is Force constant

x is max compression

Now, we know that this is also equal to the kinetic energy.

K.E = ½mv²

Thus;

½kx² = ½mv²

Making x the subject;

x = √(mv²/k)

We are given;

m = 5 kg

v = 2 m/s

k = 85 N/cm = 8500 N/m

Thus;

x = √(mv²/k)

x = √(5 × 2²/8500)

x = 0.0485 m

x = 4.85 cm

Answer: 0.5 m

Explanation:

Given

Mass of the person is [tex]m=50\ kg[/tex]

Trampoline launches the person into the air up to height of [tex]h=2\ m[/tex]

Force experience by springs is [tex]F=1960\ N[/tex]

Here, the work done on displacing the springs is equivalent to the Potential energy acquired by the person i.e.

[tex]\Rightarrow F\cdot x=mgh\quad [\text{x=displacement of the trampoline}]\\\\\text{Insert the values}\\\\\Rightarrow x=\dfrac{50\times 9.8\times 2}{1960}\\\\\Rightarrow x=\dfrac{980}{1960}\\\\\Rightarrow x=0.5\ m[/tex]

Answer:

0.5

Explanation:

Answer:

b and d

Explanation:

Answer:

a) 98.1 Joules

b) 49.05 N × sin(θ)

c) 9.81 × sin(θ)

d) The velocity of the block at the bottom of the plane, v is approximately 6.264 m/s

e) 98.1 Joules

Explanation:

The given parameters of the block are;

The mass of the block, m = 5.0 kg

The distance down the plane the block slides, h = 2.0 m

The friction between the block and the surface = 0

Let θ represent the angle of inclination oof the plane

a) The gravitational potential energy, P.E. = m·g·h

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

∴ P.E. ≈ 5.0 kg × 9.81 m/s² × 2.0 m = 98.1 Joules

The gravitational potential energy, P.E. ≈ 98.1 Joules

b) The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex], is given as follows;

[tex]w_{\parallel}[/tex] = w × sin(θ) = m·g·sin(θ)

∴ [tex]w_{\parallel}[/tex] ≈ 5.0 kg × 9.81 m/s² × sin(θ) = 49.05 × sin(θ) N

The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex] ≈ 49.05 N × sin(θ)

c) The component of the weight along the inclined plane = The force with which the block moves along the inclined plane, therefore;

[tex]w_{\parallel}[/tex] = m·g·sin(θ) = m·a

Where a represents the acceleration of the block along the plane

Therefore, by comparison, we have;

g·sin(θ) = a

∴ a ≈ 9.81 × sin(θ)

d) Given that the motion of the block is 2.0 m downwards, we have;

The velocity of the block at the bottom of the plane, v² = 2·g·h

Therefore, v² ≈ 2 × 9.81 m/s²× 2.0 m = 39.24 m²/s²

v = √(39.24 m²/s²) ≈ 6.264 m/s

e) The kinetic energy at the bottom of the plane, K.E. = (1/2)·m·v²

∴ K.E. = (1/2) × 5.0 kg × 39.24 m²/s² = 98.1 J

Answer:

20 m/ s

Explanation:

change in velocity = 4m/ s

[tex]acceleration = \frac{rate \: of \: change \: of \: velocity}{time} [/tex]

[tex]acc = \frac{4}{2} \\ = 2[/tex]

initial velocity = 0m/ s

[tex]2 = \frac{v - 0}{10} [/tex]

cross multiplying

[tex]20 = v[/tex]

so the velocity after 10s will be 20m/s

Answer:

Newton' second law  and third law describes the situation.

Explanation:

According to the Newton's second law, the force applied on a body is proportional to the rate of change of momentum of the body.

According to the Newton's third law, for every action there is an equal and opposite reaction.

When ice skater pushes harder means more force is applied so he moves fast and more be the action force more be the reaction force.

Thus, Newton' second law  and third law describes the situation.

Answer:

5.33ms-¹

Explanation:

that is the procedure above

Explanation:

The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.

hope it helps you

Answer:

Explanation:

The formula for centripetal acceleration is

[tex]a_c=\frac{v^2}{r}[/tex] and filling in:

[tex]11.3=\frac{(30.0)^2}{r}[/tex] and solving for r:

[tex]r=\frac{(30.0)^2}{11.3}[/tex] gives us that

r = 79.6 m

Answer:

1) They are electrically neutral

2) They have slightly more weight than protons

Explanation:

The given atomic particle found in the nucleus has the following characteristics;

The location of the particle = The nucleus

The (numbers of the) particle does not contribute to (change) the atomic number of the element

The particles found within the nucleus of an atom are; Neutrons and protons

The particle within the nucleus that determines the atomic number = The number of protons

Therefore, the particle referenced in the question is the neutrons

The two characteristics of the neutron are;

1) The neutrons are neutral, electrically

2) Neutrons have slightly more weight than protons

3) Neutrons are magnetic

4) Neutrons are very small

5) Neutrons consist of three quarks; One 'Up', and two 'Down' quarks

Therefore, two characteristics of the particle are;

1) They are electrically neutral and 2) They are slightly heavier than protons.

Answer:

39 m/s²

Explanation:

initial Velocity (u) = 9m/s

acceleration (a) = 1.5m/s²

time(t) = 20s

V=u + at

V=9 + 1.5(20)

V=9 + 30

V=39m/s

Answer: See explanation

Explanation:

From the information given, we are informed that an instrument rated pilot is planning a flight under IFR on July 10, this year.

It should be noted that before conducting the flight, the pilot must have performed and logged the prescribed tasks and repetitions that are required for instrument currency no earlier than January, 10 for the year.

Because they act on different objects.

Answer:

Explanation:

[tex]KE=\frac{1}{2}mv^2[/tex] so filling in:

[tex]KE=\frac{1}{2}(1000)(30)^2[/tex] so to 2 sig figs (which is actually not accurate, but oh well...)

KE = 450000 J

If we want to find out how high it will have to travel up a hill so that its PE is the same as the KE at this speed, we set the value for KE = to PE:

450000 = (1000)(9.8)h so

[tex]h=\frac{450000}{(1000)(9.8)}=45.9m[/tex]

Answer:

Weight = 160 N

Explanation:

The weight of an object is a measure of the gravitational force on the object. So that weight is synonymous to the force applied by the object.

i.e Weight = mass x gravitational force

Also, the pressure of an object is the ratio of its force to area covered by the object. So that;

P = [tex]\frac{F}{A}[/tex]

Given that: area = 4 [tex]cm^{2}[/tex] (0.0004 [tex]m^{2}[/tex]), and pressure = 100 000 N[tex]m^{-2}[/tex].

Then;

F = PA

  = 100 000 N[tex]m^{-2}[/tex] x 0.0004 [tex]m^{2}[/tex]

F = 40 N

The force applied on the ground by each of the four tyres of the car is 40 N.

Thus, the weight of the car = 4 x 40 N

                                     = 160 N

Answer:

The factors of production include Land, Labour, Capital and Enterpreneurship

Explanation:

The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.

The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.

Answer:

S = 1/2 g t^2      where t is the time to fall 1.2 m

t = (2 S / g)^1/2 = (2 * 1.2 / 9.8) = .495 s

Sy = Vy T = 3 m/sec  * .495  sec = 1.48 m     distance from edge of table

(Rotational speed has no effect since table is smooth)

Answer:

the combination,decomposition or replacement that occurs in the molecules of matter during chemical change called chemical reaction

Answer:

A chemical change happens when one chemical substance is transformed into one or more different substances, such as when iron becomes rust. ... A chemical change is different from a physical change, which doesn't rearrange atoms or molecules and produce a completely new substance.

As per the details given, Priya's total distance traveled is 950 meters, displacement is approximately 410.52, speed is 95 meters per minute, and velocity is 41.05 meters per minute.

To calculate Priya's total distance:

Total distance = 300 m + 500 m + 150 m = 950 m

So, Priya's total distance traveled is 950 meters.

To calculate Priya's displacement, we need to find the straight-line distance and direction from her starting point to her ending point.

Displacement = √((Δx)² + (Δy)²)

For Δx:

Δx = 500 m - 150 m × cos(45°)

Δx = 500 m - 150 m × 0.707

Δx = 500 m - 106.05 m

Δx = 393.95 m

For Δy:

Δy = 150 m × sin(45°)

Δy = 150 m × 0.707

Δy = 106.05 m

Displacement = √((393.95 m)² + (106.05 m)²)

Displacement ≈ 410.52 m

So, Priya's displacement is approximately 410.52 meters in a direction of approximately N36°W.

To calculate Priya's speed, we use the formula:

Speed = Total distance ÷ Time

Speed = 950 m ÷ 10 min

Speed = 95 m/min

So, Priya's speed is 95 meters per minute.

To calculate Priya's velocity:

Velocity = Displacement ÷ Time

Velocity = 410.52 m ÷ 10 min

Velocity = 41.05 m/min

Thus, Priya's velocity is 41.05 meters per minute in a direction of N36°W.

For more details regarding velocity, visit:

https://brainly.com/question/34025828

#SPJ5

Answer:

below

Explanation:

that is the procedure above

Answer:

B

Explanation:

Answer:

HEY THERE!

Explanation:

The temperature tells us the average speeds of the gas particles, which are held in the cluster by gravity, so we can use these speeds to determine the cluster mass

HAVE A GOOD DAY!

Answer:

[tex] { \tt{(1.54 \times {10}^{6}) + (6.15 \times {10}^{6}) }} \\ = { \tt{(1.54 + 6.15) \times {10}^{6} }} \\ = { \tt{7.69 \times {10}^{6} }}[/tex]

Answer:

The height reached by the ball=0.459 m

Explanation:

We are given that

[tex]\theta=30^{\circ}[/tex]

Initial speed, u=6 m/s

We have to find the maximum height reached by ball.

Maximum height reached by ball

[tex]h=\frac{u^2sin^2\theta}{2g}[/tex]

Where [tex]g=9.8m/s^2[/tex]

Substitute the values

[tex]h=\frac{6^2sin^230^{\circ}}{2\times 9.8}[/tex]

[tex]h=\frac{36\times \frac{1}{4}}{2\times 9.8}[/tex]

[tex]h=0.459 m[/tex]

Hence, the height reached by the ball=0.459 m

Answer:

B. seafloor spreading

Explanation:

divergent motion between the Eurasian and North American, and African and South American Plates. ... In this way, as the plates move further apart new ocean lithosphere is formed at the ridge and the ocean basin gets wider

geological society

Answer:

C. Basic research provides fundamental knowledge that can be used to conduct applied research.

Explanation:

Applied research is used to solve practical and specific problems. Basic research is used to advance theories and scientific knowledge; it might not result in an invention or a solution, but can be used to gain knowledge about a specific subject.