If a shirt is made of a material that reflects only red light, then it would appear red in white light. This is because white light is a combination of all colors of visible light, including red. When white light shines on a red shirt, all colors except red are absorbed by the shirt's material.
The red light is reflected back to our eyes, making the shirt appear red. Therefore, the red shirt would still appear red in white light even though white light contains all colors of the visible light spectrum. assume that a shirt is made of a material that reflects only red light and each colored light is monochromatic that is only one frequency is produced. what color would the red shirt look in white light.
Therefore, the red shirt would still appear red in white light even though white light contains all colors of the visible light spectrum. assume that a shirt is made of a material that reflects only red light and each colored light is monochromatic that is only one frequency is produced. what color would the red shirt look in white light. This is because white light is a combination of all colors of visible light, including red. When white light shines on a red shirt, all colors except red are absorbed by the shirt's material.
To know more about material visit:
https://brainly.com/question/27403649
#SPJ11
If the mass of the box is .612 kg, what is the box's acceleration?
Answer:
Net force/.612=acceleraton
Explanation:
Need more information for a specific answer. I derived this general equation using newton's second law: F=MA. The acceleration of the object is calculated by dividing the net force on the object by its mass.
A physicist observes that a cannonball shot horizontally from a cannon travels 1.000 m before falling to the ground. Which of the following statements correctly explains this observation using Newton's laws?
O Objects tend to remain in the state of motion they are in unless acted upon by an unbalanced force. Friction and gravity acted on the cannonball, slowing it down and slamming it into the ground
O Objects at rest tend to remain in their cument state of motion unless acted upon by an unbalanced force, but objects in motion require a continual application of force to stay in motion
The force on the cannonball produced by the cannon was less than the force of friction on the cannonball, causing the cannonball to slow down and fall to the ground.
O The force on the cannonball produced by the cannon exactly equaled the force of friction on the cannonball, balancing the forces and causing it to fall to the ground.
The correct statement that explains the observation using Newton's laws is objects at rest tend to remain in their current state of motion unless acted upon by an unbalanced force, but objects in motion require a continual application of force to stay in motion. Here option A is correct.
According to Newton's first law of motion, an object will continue moving at a constant velocity in a straight line unless acted upon by an external force. In this case, when the cannonball is shot horizontally from the cannon, it initially possesses a forward velocity due to the force applied by the cannon. However, once the cannonball is in motion, the only forces acting on it are gravity and friction.
Gravity acts vertically downward, causing the cannonball to accelerate downward. Friction acts horizontally in the opposite direction to the motion of the cannonball. As the cannonball moves forward, friction opposes its motion and gradually slows it down.
Since there is no force continuously propelling the cannonball forward, and the forces of friction and gravity act on it, the cannonball eventually comes to a stop and falls to the ground. Hence option A is correct.
For more such questions on Newton's laws
https://brainly.com/question/28171613
#SP8
If a bus accelerates from 10 m/s to 15 m/s in 10 seconds with a force of 3000N what is its mass?
Answer:
6000kg
Explanation:
Given parameters:
Initial velocity = 10m/s
Final velocity = 15m/s
Time = 10s
Force = 3000N
Unknown:
Mass of the bus = ?
Solution:
Force is the mass multiplied by acceleration.
Force = mass x acceleration
Acceleration = [tex]\frac{final velocity - initial velocity }{time}[/tex]
Force = mass x [tex]\frac{final velocity - initial velocity }{time}[/tex]
Insert the parameters and solve;
3000 = mass x [tex]\frac{15 - 10}{10}[/tex]
3000 = [tex]\frac{mass}{2}[/tex]
Mass = 6000kg
when a parachute opens, the air exerts a large drag force on it. the upward force initially greater than the weight of the sky diver and, thus, slows him down. suppose the weight of the sky diver in 967 n and the drag force has a magnitude of 1041 n. the mass of the sky diver is 98.7 kg. take upward to be the positive direction. what is his acceleration, including sign?
The main answer to the question is as follows: Given,Weight of skydiver, W = 967 NMass of skydiver, m = 98.7 kgDrag force, Fd = 1041 NNow, the skydiver is under two forces,Weight of the skydiver, W = 967 NUpward force, FUp = - 1041 N (opposite in direction to the weight of the skydiver)
Net force acting on the skydiver, F = FUp + W= - 1041 N + 967 N= - 74 NAs acceleration, a = F/mSubstituting the given values, we get,a = -74 N/98.7 kg= -0.749 m/s² :When a parachute opens, the air exerts a large drag force on it. The upward force initially greater than the weight of the sky diver and, thus, slows him down. The skydiver is under two forces: the weight of the skydiver and the upward force. The weight of the skydiver is always directed towards the ground, whereas the upward force on the skydiver is always directed away from the ground.
The net force acting on the skydiver is the sum of the weight of the skydiver and the upward force.The acceleration of the skydiver can be determined as a = F/m, where F is the net force acting on the skydiver and m is the mass of the skydiver. The acceleration of the skydiver is negative because the net force is in the opposite direction to the upward force.
To know more about forces visit:
https://brainly.com/question/13191643
#SPJ11
Which event is an example of condensation?
O A. Ice forms on the surface of a puddle.
B. The outside of a glass of ice water becomes moist.
c. Perspiration dries on a person's skin.
D. Fog disappears when the Sun comes out.
Answer:
the correct answer is B.
a rifle bullet with a mass of 11.5 g traveling toward the right at 248 m/s strikes a large bag of sand and penetrates it to a depth of 25.0 cm. determine the magnitude and direction of the friction force (assumed constant) that acts on the bullet.
Magnitude of the friction force acting on the bullet is 6823.68 N and the direction of the friction force is to the left. We can use the work-energy principle to determine the friction force acting on the bullet.
Given data : Mass of the rifle bullet (m) = 11.5 g = 0.0115 kg, Initial velocity of the rifle bullet (u) = 0 m/s, Final velocity of the rifle bullet (v) = 248 m/s, Displacement of the bullet (s) = 25 cm = 0.25 m
We can use the work-energy principle to determine the friction force acting on the bullet.
Work-energy principles states that the work done by the net force on an object is equal to its change in kinetic energy. Wnet = ΔK
Where, Wnet = Net work done by all the forces (applied force and friction force), ΔK = Change in kinetic energy = Kf – KiKf = Final kinetic energy,
Ki = Initial kinetic energy, Initial kinetic energy of the bullet,
Ki = (1/2) mu²
= (1/2) × 0.0115 kg × 0²
= 0 J
Final kinetic energy of the bullet,
Kf = (1/2) mv²
= (1/2) × 0.0115 kg × (248 m/s)²
= 1705.92 J
∴ ΔK = Kf - Ki
= 1705.92 J - 0 J
= 1705.92 J
Now, we know that the displacement of the bullet is 0.25 m. Therefore, the work done by the friction force can be written as follows: Wf = Fs, where, F = Magnitude of friction force acting on the bullet= - F (direction of friction force is opposite to that of the motion)
∴ W net = W f + W applied
∴ - F (0.25 m) = 1705.92 J
∴ F = - (1705.92 J) / 0.25 m
= - 6823.68 J/m
= - 6823.68 N (approx)
The friction force is directed opposite to the direction of motion of the bullet. Therefore, the direction of the friction force is to the left.
Magnitude of friction force acting on the bullet = 6823.68 N
Direction of friction force acting on the bullet = Left
Magnitude of the friction force acting on the bullet is 6823.68 N and the direction of the friction force is to the left.
To know more about friction force, refer
https://brainly.com/question/24386803
#SPJ11
Restate Newton’s third law of motion.
Answer:
The force exerted by one source object on another target object always creates another force at the target object that pushes back on the source object with the same ... or His third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A.
List the three groups of stars by decreasing density order
The three groups of stars, listed in decreasing density order, are white dwarfs, main sequence stars, and giant stars.
White dwarfs: White dwarfs are the densest group of stars. They are remnants of low- to medium-mass stars that have exhausted their nuclear fuel and undergone gravitational collapse.
Main sequence stars: Main sequence stars, such as our Sun, are the most common type of star in the universe. They are characterized by their stable fusion of hydrogen into helium in their cores, which generates energy and maintains their equilibrium.
Giant stars: Giant stars are larger and more massive than main sequence stars. They have exhausted their core hydrogen fuel and expanded in size. The increased size of giant stars does not correspond to a proportional increase in mass, resulting in a lower density compared to main sequence stars.
Learn more about equilibrium here:
https://brainly.com/question/14281439
#SPJ11
light of frequency 9.95x1014 hz ejects electrons from the surface of silver. if the maximum kinetic energy of the ejected electrons is 0.180x10-19 j what is the work function of silver?
The work function of silver is 1.24 × 10^(-19) J Frequency of light, v = 9.95 × 10¹⁴ Hz Maximum kinetic energy of the ejected electrons, KE = 0.180 × 10⁻¹⁹ JThe work function is defined as the minimum amount of energy required by an electron to be emitted from the surface of a metal.
Therefore, according work function can be calculated using the following formula:W = hν - KEWhere,h = Planck's constant = 6.626 × 10⁻³⁴ J.sν = frequency of light KE = maximum kinetic energy of the ejected electronsPutting the given values in the above formula, we get:W = hν - KE= 6.626 × 10⁻³⁴ J.s × 9.95 × 10¹⁴ Hz - 0.180 × 10⁻¹⁹ J= 6.60 × 10⁻¹⁹ J - 0.180 × 10⁻¹⁹ J= 6.42 × 10⁻¹⁹ JThus, the work function of silver is 6.42 × 10⁻¹⁹ J.
However, the answer is given in joules but the work function is usually expressed in electron volts(eV) which can be calculated by dividing the above answer by the charge on one electron, i.e., 1.6 × 10⁻¹⁹ C. This gives:W = 6.42 × 10⁻¹⁹ J / 1.6 × 10⁻¹⁹ C= 4.01 eVTherefore, the work function of silver is 1.24 × 10^(-19) J.
TO know more about that kinetic visit:
https://brainly.com/question/999862
#SPJ11
If the compressibility of the aquifer is 10% m?N and its thickness is 10 m, how much compaction (m) will the aquifer undergo during the head reduction in part (c) ?
If the porosity and the hydraulic conductivity of the aquifer are 0.30 and 1.0 m/s, calculate the transmissivity (m7) and storativity of the aquifer. The compressibility of water is 4.4 x 10-1° m'/N.
a. The aquifer will undergo compaction of 1 meter during the head reduction in part (c).
b. The transmissivity of the aquifer is 0.30 m²/s and the storativity is 3.3 x 10⁻⁵.
a. Given that the compressibility of the aquifer is 10% m/N and its thickness is 10 meters, we can calculate the compaction using the formula:
Compaction = Compressibility x Thickness
Compaction = (10% m/N) x 10 m = 0.10 x 10 m = 1 meter
Therefore, the aquifer will undergo compaction of 1 meter during the head reduction.
b. Transmissivity (T) is calculated by multiplying the hydraulic conductivity (K) of the aquifer by its thickness (h):
Transmissivity (T) = K x h = (1.0 m/s) x 10 m = 10 m²/s
Storativity (S) is calculated as the product of the specific storage (Ss) and the thickness (h):
Storativity (S) = Ss x h = (8.8 x 10⁻⁶) x 10 m = 8.8 x 10⁻⁵
Therefore, the transmissivity of the aquifer is 10 m²/s and the storativity is 8.8 x 10⁻⁵.
To learn more about Transmissivity, here
https://brainly.com/question/31943830
#SPJ4
ability of the muscles to function effectively and efficiently without undue fatigue
Explanation:
Physical health can be described as the capability to perform everyday activities without excessive exhaustion, vigour and cognitive function, and with enough strength to enjoy common leisure activities and to cope with unforeseen circumstances.
The correct term for the given phrase is physical fitness
Reason:
Physical fitness is the ability of the body to perform daily tasks without the onset of fatigue, and with alertness and vigor, whilst still remaining strong enough to handle unexpected emergencies, and enjoy spending ones free time on activities of leisure and hobbies
The components of physical fitness are;
Cardiorespiratory endurance
Muscular endurance
Muscular strength
Flexibility
Body composition
Therefore, the term being described is physical fitness
Learn more about physical fitness here:
https://brainly.com/question/20961164
https://brainly.com/question/18558945
Which of the following is/are the best example(s) of elastic collisio(s)?
A) A collision between two billiard balls.
B) A collision between two automobiles.
C) A basketball bouncing off the floor.
D) An egg colliding with a brick wall.
Answer: (D) an egg colliding with a brick wall is not the best example of an elastic collision.
An elastic collision is defined as a collision in which both kinetic energy and momentum are conserved. Kinetic energy is transferred from one object to another during a collision in which they both collide. The energy lost in a collision is known as inelastic energy.
The best example of an elastic collision is:
A) a collision between two billiard balls and
C) a basketball bouncing off the floor.
A collision between two billiard balls A collision between two billiard balls is the best example of an elastic collision. When two billiard balls collide, kinetic energy is transferred from one ball to the other. However, because the billiard balls are made of elastic materials, the energy is not lost during the collision. As a result, both the momentum and the kinetic energy of the billiard balls remain unchanged after the collision.A basketball bouncing off the floorWhen a basketball bounces off the floor, it is also an example of an elastic collision. When the basketball hits the floor, kinetic energy is transferred from the basketball to the floor.
However, because the basketball is made of an elastic material, the energy is not lost. As a result, the basketball bounces back up off the floor with the same kinetic energy that it had before it hit the floor.
Therefore, a basketball bouncing off the floor is also an example of an elastic collision. An egg colliding with a brick wall is an example of an inelastic collision. In an inelastic collision, some of the kinetic energy is lost during the collision. As a result, both the momentum and the kinetic energy of the objects are not conserved.
Therefore, D) an egg colliding with a brick wall is not the best example of an elastic collision.
Learn more about collision: https://brainly.com/question/7221794
#SPJJ11
What is the metric unit of work expressed in base units?
Answer:
Energy, work, quantity of heat
Name ; joule
Expression in terms of SI base units ; [tex]m^2\cdot kg\cdot s^-^2[/tex]
Explanation:
Density of oil is less than the density of water. *
true
False
Answer:
false
Explanation:
because oil is thicker than water
Answer:
answer is false
Explanation:
water is more dense than oil so they can't mix . Oil float above the water
If a nuclear bomb is released into space and explodes, will it be audible assuming that you are an observer from space too? Why or why not?
No, a nuclear bomb explosion in space would not be audible to an observer in space.
Sound waves require a medium, such as air or water, to travel. In the vacuum of space, there is no air or other medium to transmit sound waves.
Therefore, even though a nuclear bomb explosion produces a tremendous amount of energy, it would not create a sound that could be heard by an observer in space. Sound travels through the vibration of particles, and without particles vibrating, there can be no sound transmission.
To learn more about observer click here:
brainly.com/question/25064184
#SPJ11
Why is rust formed on iron
a student is standing on the 5 yard line of a football field. the student throws a frisbee to the 40 yard line of the football field, and the flight of the frisbee is 4 seconds. what is the speed (yards per second) that the frisbee is traveling? round your answer to the nearest tenth (0.0) and do not include units in the answer.
This 8.8 is the speed (yards per second) that the frisbee is traveling we need to use the formula.
The frisbee traveled from 5 yard line to 40 yard line, which means it traveled a distance of 40 - 5 = 35 yards. And the time taken for the frisbee to travel this distance is 4 seconds. Therefore, we can find the speed of the frisbee by dividing the distance by time.
Speed = Distance / Time = 35 yards / 4 seconds = 8.75 yards per second (rounded to the nearest tenth)Therefore, the is 8.8.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ11
write the balanced chemical equation for the reaction between solutions of acetic acid and sodium hydroxide. include phtsical states in the equation
The balanced chemical equation for the reaction between solutions of acetic acid (CH₃COOH) and sodium hydroxide (NaOH) is:
CH₃COOH (aq) + NaOH (aq) → CH₃COONa (aq) + H₂O (l)
In this equation, (aq) represents an aqueous solution, indicating that the substances are dissolved in water, and (l) represents a liquid state.
Acetic acid (CH₃COOH) is a weak acid, while sodium hydroxide (NaOH) is a strong base. When these two solutions are mixed, they undergo a neutralization reaction. The acetic acid donates a hydrogen ion (H+) to the sodium hydroxide, forming water (H₂O) and a sodium acetate (CH3COONa) salt.
The reaction can be understood in terms of the ionization of acetic acid and the dissociation of sodium hydroxide. In water, acetic acid partially ionizes, releasing hydrogen ions (H+) and acetate ions (CHCOO-):
CH₃COOH (aq) → H+ (aq) + CH₃COO- (aq)
Similarly, sodium hydroxide dissociates completely into sodium ions (Na+) and hydroxide ions (OH-):
NaOH (aq) → Na+ (aq) + OH- (aq)
When these ions combine, the hydrogen ion from acetic acid reacts with the hydroxide ion from sodium hydroxide to form water:
H+ (aq) + OH- (aq) → H₂O (l)
The remaining sodium ion from sodium hydroxide combines with the acetate ion from acetic acid to form sodium acetate:
Na+ (aq) + CH₃COO- (aq) → CH₃COONa (aq)
Overall, the reaction between acetic acid and sodium hydroxide results in the formation of sodium acetate and water. The equation represents a balanced chemical equation, meaning that the number of atoms of each element is the same on both sides of the equation.
Learn more about ions here:
https://brainly.com/question/30663970
#SPJ11
The graphs represent the position X, velocity V, and acceleration a as a function of time T for a marble moving in one dimension. Which of the following could describe the motion of the marble? a. Rolling along the floor and then bouncing off a wallb. Rolling down one side of a bowl and then rolling up the other sidec. Rolling up a ramp and then rolling back downd. Falling and then bouncing elastically off a hard floorState the correct answer and then for each wrong choice, draw a sketch that shows what a position vs. time and velocity vs. time graph WOULD look like if that were the right answer. Since B is wrong it has been done for you and an example.
The correct answer is: b. Rolling down one side of a bowl and then rolling up the other side
The position vs. time graph for this scenario would show a U-shaped curve, indicating the marble's motion down one side of a bowl and then up the other side. The velocity vs. time graph would show a parabolic shape, with the marble's velocity increasing as it rolls down the bowl, reaching a maximum at the bottom, and then decreasing as it rolls up the other side.
Now, let's examine the other options and describe the position vs. time and velocity vs. time graphs for each:
a. Rolling along the floor and then bouncing off a wall
In this case, the position vs. time graph would show a linear increase or decrease in position, depending on the direction of motion, until the marble reaches the wall and bounces off. The velocity vs. time graph would show a sudden change in velocity when the marble bounces off the wall.
c. Rolling up a ramp and then rolling back down
The position vs. time graph would show an increasing slope as the marble rolls up the ramp and then a decreasing slope as it rolls back down. The velocity vs. time graph would show a positive velocity while rolling up the ramp, then a decrease to zero at the top, followed by a negative velocity while rolling back down.
d. Falling and then bouncing elastically off a hard floor
The position vs. time graph would show a linear increase in position during the fall until the marble hits the floor, followed by a sudden decrease in position when it bounces back up. The velocity vs. time graph would show a constant negative velocity during the fall and then a sudden change in velocity to a positive value when it bounces off the floor.
By analyzing the motion described by the position vs. time and velocity vs. time graphs, we can conclude that the correct answer is b. Rolling down one side of a bowl and then rolling up the other side.
Learn more about rolling here:
https://brainly.com/question/29568301
#SPJ11
what is the distance covered by a free falling body during the first 3 seconds of its motion?
ANSWER MY QUESTION WITH EXPLANATION
A crane raises a crate with a mass of 150 kg to a height of 20 m. Given that
the acceleration due to gravity is 9.8 m/s2, what is the crate's potential energy
at this point?
O A. 306
B. 294,000 J
O C. 29,400 J
O D. 720 j
Answer:
P.E=29400J
Explanation:
m=150Kg h=20m g=9.8ms⁻²
P.E=mgh
P.E=150×9.8×20
P.E=29400J
The potential energy of the crane that raises a crate with a mass of 150kg is 29,400 Joules. Thus, the correct option is C.
What is Potential energy?Potential energy is the energy which is stored inside the body of an object which is at rest. This energy is transformed into kinetic energy when the body comes into motion. The SI unit of potential energy is Joules.
The potential energy stored in the crate is:
PE = m × g × h
where, PE = Potential energy,
m = mass of the object,
g = acceleration due to gravity,
h = height which the object achieve
PE = 150kg × 9.8m/s² × 20m
PE = 3000 × 9.8
PE = 29,400 Joules
Therefore, the correct option is C. The potential energy of the crate is 29,400 Joules.
Learn more about Potential energy here:
https://brainly.com/question/24284560
#SPJ2
Completion Status: A Click Submit to complete this assessment. estion 4 A 12 in diameter rod is subjected to an axial tensile load of 60 kips. Compute. a. The normal stress developed on an inclined plane at an angle of 25 with the cross section of the rod. b. The maximum normal stress developed in the rod.
The normal stress on an inclined plane at 25 degrees can be calculated using σ = F / A * cos²θ, while the maximum normal stress is σ_max = F / A_max.
a. To calculate the normal stress developed on an inclined plane, we use the formula: σ = F / A * cos²θ. Given that the diameter of the rod is 12 inches, the radius (r) is half of the diameter, which is 6 inches or 0.5 feet. The cross-sectional area of the rod (A) can be calculated using the formula for the area of a circle: A = π * r². Substituting the values, we get A = π * (0.5)^2 = π * 0.25 = 0.7854 square feet.
Now, we can calculate the normal stress using the given axial tensile load (F) of 60 kips and the angle (θ) of 25 degrees. Since the load is given in kips (1 kip = 1000 pounds), we convert it to pounds by multiplying by 1000: F = 60 * 1000 = 60000 pounds.
Using the formula σ = F / A * cos²θ, we substitute the values and calculate the normal stress:
σ = 60000 / 0.7854 * cos²25 ≈ 95317.91 psi (pounds per square inch).
b. The maximum normal stress in the rod occurs when the inclined plane is aligned with the maximum cross-sectional area. In this case, the maximum cross-sectional area (A_max) is the same as the cross-sectional area of a circle, which is π * r². Substituting the radius value, we get A_max = π * (0.5)^2 = π * 0.25 = 0.7854 square feet.
To calculate the maximum normal stress (σ_max), we use the formula σ_max = F / A_max. Substituting the given axial tensile load (F) of 60 kips and the maximum cross-sectional area (A_max), we calculate the maximum normal stress:
σ_max = 60000 / 0.7854 ≈ 76448.44 psi (pounds per square inch).
Therefore, the normal stress developed on an inclined plane at an angle of 25 degrees with the cross section of the rod is approximately 95317.91 psi, and the maximum normal stress developed in the rod is approximately 76448.44 psi.
To learn more about stress click here:
brainly.com/question/31366817
#SPJ11
At a regional airport with an elevation of 76 meters below mean sea level, the observed station pressure is 1015 mb.
Using the equations presented in the activity, _____ mb must be _____ the station pressure to correctly determine the sea level pressure value in mb.
a. 10.15 mb, subtracted from
b. 10.15 mb, added to
c. 7.6 mb, subtracted from
d. 7.6 mb, added to
The answer is option c: 7.6 mb must be subtracted from the station pressure to correctly determine the sea level pressure value in mb.
To determine the sea level pressure value, we need to adjust the observed station pressure for the difference in elevation between the station and sea level.
In this case, the regional airport is located 76 meters below mean sea level. The standard atmosphere assumes a decrease of approximately 1 mb for every 10 meters of elevation gain. Therefore, we need to subtract the equivalent pressure decrease caused by the elevation difference.
Given that the observed station pressure is 1015 mb, we can calculate the adjustment by dividing the elevation difference (76 meters) by 10 and multiplying it by the pressure decrease per 10 meters (1 mb). So, (76 / 10) * 1 = 7.6 mb. Therefore, we must subtract 7.6 mb from the observed station pressure of 1015 mb to correctly determine the sea level pressure value.
To learn more about pressure click here:
brainly.com/question/29341536
#SPJ11
A uniform electric field of magnitude 1.1 x 104 N/C is perpendicular to a square sheet with sides 2.0 m long. What is the electric flux through the sheet?
The electric flux through the square sheet is [tex]4.4 * 10^4 Nm^2/C[/tex], when a uniform electric field of magnitude [tex]1.1 * 10^4 N/C[/tex] is perpendicular to a square sheet with sides 2.0 m long.
The electric flux through a closed surface is given by the formula:
[tex]\[ \Phi = \mathbf{E} \cdot \mathbf{A} \][/tex]
where [tex]\(\Phi\)[/tex] is the electric flux, [tex]\(\mathbf{E}\)[/tex] is the electric field, and [tex]\(\mathbf{A}\)[/tex] is the area vector of the surface. In this case, the electric field [tex]\(\mathbf{E}\)[/tex] is perpendicular to the square sheet, and the magnitude of the electric field is given as [tex]1.1 * 10^4 N/C[/tex].
The area of the square sheet is [tex]\(A = (2.0 \, \text{m})^2 = 4.0 \, \text{m}^2[/tex]). Since the electric field is perpendicular to the surface, the angle between the electric field and the area vector is 0 degrees.
Substituting the values into the formula, we have:
[tex]\[ \Phi = (1.1 \times 10^4 \, \text{N/C}) \cdot (4.0 \, \text{m}^2) = 4.4 \times 10^4 \, \text{N} \cdot \text{m}^2/\text{C} \][/tex]
Therefore, the electric flux through the square sheet is [tex]4.4 * 10^4 Nm^2/C[/tex].
Learn more about electric flux here:
https://brainly.com/question/30409677
#SPJ11
what are the contents of register r1 in decimal after executing the following two instructions: (all numbers are hexadecimal. negative numbers are represented with two's complement.) mov r1, eb //moves data (eb) into register r1 mov r2, 57 //moves data (57) into register r2 sub r1, r2 // r1
The contents of register r1 after executing these instructions is 148 in decimal. To determine the contents of register r1 in decimal after executing the given instructions, let's go through each step.
mov r1, eb: This instruction moves the data "eb" into register r1. Assuming the data is in hexadecimal, "eb" is equivalent to the decimal value 235.
mov r2, 57: This instruction moves the data "57" into register r2. Assuming the data is in hexadecimal, "57" is equivalent to the decimal value 87.
sub r1, r2: This instruction subtracts the value in register r2 (87) from the value in register r1 (235). The result of the subtraction is stored in r1.
Subtracting 87 from 235 gives us 148. Therefore, after executing these instructions, the contents of register r1 in decimal would be 148.
n the given scenario, the contents of register r1 in decimal after executing the instructions "mov r1, eb", "mov r2, 57", and "sub r1, r2" are 148.
The instruction "mov r1, eb" moves the hexadecimal value "eb" into register r1, which is equivalent to the decimal value 235.
The instruction "mov r2, 57" moves the hexadecimal value "57" into register r2, which is equivalent to the decimal value 87.
The instruction "sub r1, r2" subtracts the value in register r2 (87) from the value in register r1 (235). The result, 148, is stored in register r1.
Therefore, the contents of register r1 after executing these instructions is 148 in decimal.
To know more about decimal
brainly.com/question/30958821
#SPJ11
To do your homework correctly you should (5 points)
A) not eat
B) not sleep
C) minimize everything important in your life and work
D) all of the above
Answer:
C according to me
Explanation:
ITS HARD
an arrow is launched 30 degrees above the horizontal with an intial speed of 20 m/s from the top of a watch tower after 3 seconds what is the arrows speed
The arrow's speed after 3 seconds is approximately 43.091 m/s.
The horizontal and vertical components of the velocity can be determined using trigonometry. The initial vertical velocity is given by v₀y = v₀ sin θ, and the horizontal velocity is given by v₀x = v₀ cos θ.
Given, θ = 30°, v₀ = 20 m/s, t = 3 s. The acceleration of gravity is g = 9.81 m/s².Let's now use the kinematic equation vf = v₀ + at. Since the arrow is launched at an angle above the horizontal, we need to calculate the horizontal and vertical components of the velocity.
The initial vertical velocity of the arrow is:
v₀y = v₀ sin θ= (20 m/s) sin 30°= 10 m/s
The horizontal velocity of the arrow is:
v₀x = v₀ cos θ= (20 m/s) cos 30°= 17.3205 m/s
Using the kinematic equation vf = v₀ + at, we can calculate the vertical velocity of the arrow after 3 seconds:
vfy = v₀y + gt
= (10 m/s) + (9.81 m/s²)(3 s)
= 39.43 m/s
The horizontal velocity doesn't change during the flight of the arrow, so vf = v₀x = 17.3205 m/s.
The final velocity of the arrow is given by the vector sum of the horizontal and vertical velocities:
v = √(vf² + v₀x²)
= √(39.43² + 17.3205²)
= 43.091 m/s
Learn more about the kinematic equations: https://brainly.com/question/14355103
#SPJ11
Is best defined as the process by which a change in one part of a system results in changes to other parts of the system, which in turn affect the first part.
The answer is feedback.
How
do you think the outcomes of the Lotka- Volterra models would be
similar or different if the predator fed on several different prey
items? Why?
please explain
If the predator in the Lotka-Volterra models feeds on several different prey items, the outcomes would likely be different compared to a scenario where it feeds on a single prey item.
In the Lotka-Volterra models, the interaction between predators and prey is typically represented by a set of differential equations. When a predator feeds on several different prey items, it introduces additional complexities to the model. Here are a few reasons why the outcomes would likely be different:
Prey Interactions: Different prey items may have different population dynamics and interactions with each other. Some prey may compete for resources, while others may have a mutually beneficial relationship. These interactions can affect the predator's ability to obtain food and impact the population dynamics of both the predator and prey species.
Predator Behavior: A predator feeding on multiple prey items may exhibit different foraging behaviors. It could switch between prey types based on availability or preference. This dynamic foraging behavior can influence the predation pressure on each prey species and lead to different population dynamics.
Resource Partitioning: When a predator consumes multiple prey items, there may be resource partitioning among the prey species. Each prey species may have different resource requirements, leading to variations in their population sizes and dynamics. This partitioning can create niche differentiation and affect the overall stability and dynamics of the predator-prey system.
Trophic Cascades: The presence of multiple prey items can introduce the possibility of trophic cascades, where changes in one prey population can indirectly affect the other prey species and subsequently impact the predator. For example, if the predator's primary prey becomes scarce, it may switch to another prey item, which could lead to population fluctuations and indirect effects throughout the ecosystem.
In summary, when the predator in the Lotka-Volterra models feeds on multiple prey items, the outcomes can be different due to complex prey interactions, predator behavior, resource partitioning, and the potential for trophic cascades. These additional factors introduce more variables and dynamics into the model, leading to different population sizes and interactions between the predator and prey species.
To learn more about outcomes click here:
brainly.com/question/1057843
#SPJ11
A bullet moving horizontally with a velocity of 40.0 m/s strikes a sandbag and penetrates a distance of 20.0 cm before coming to rest. what is the acceleration of the bullet in m/s?
Answer:
-4000 m/s²
Explanation:
Given:
Δx = 0.200 m
v₀ = 40.0 m/s
v = 0 m/s
Find: a
v² = v₀² + 2aΔx
(0 m/s)² = (40.0 m/s)² + 2a (0.200 m)
a = -4000 m/s²
