Assume the blue is a string and the orange is a meterstick. At the 50.1 cm mark, is there a pivot? Yes or No. Explain why

Assume The Blue Is A String And The Orange Is A Meterstick. At The 50.1 Cm Mark, Is There A Pivot? Yes

Answers

Answer 1
Yes because that is where both ends will unite and it will make the pivot

Related Questions

if you looked through a spectroscope and saw light with a wavelength of 450nm, what color would you see? How would its energy and frequency compare to red light?

Please thoroughly explain!

Answers

You would see blue-violet hue if you peered throughout a spectroscope and observed light that had a wavelength of 450 nm.

Does energy have a wavelength?

Wavelength or frequency are connected to energy in the same way as they are to light. More energy is correlated with shorter wavelengths and higher frequencies. Hence, lower energy is produced by longer wavelengths and lower frequencies.

How are wavelengths determined?

By measuring overall distances between two identical locations on adjacent waves, the duration can always be found. For determining the wavelength of a waveguide, the distance from one compress to the next or from one rarefaction to another is measured.

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ1

a rock rolling down a slope from rest covers a distance of 4 m in the first second. What distance will it covers in 3 sec?​

Answers

Wouldn’t the answer for this question be 12 m because 4x3

Answer: 12 meters

Explanation:

the rate is 4 meters per second
the rock rolled for 3 seconds
4 x 3 = 12

Kyle is blowing leaves with a leaf blower. He lifts the 1600 newton leaf blower at a
distance of 6 meters. What are the joules of work being put out?

PLS HELP <3

Answers

Answer:

To calculate the work being done, we need to use the formula:

work = force x distance x cos(theta)

where force is in newtons, distance is in meters, and theta is the angle between the direction of the force and the direction of the movement.

In this case, the force is the weight of the leaf blower, which is 1600 N, the distance is 6 meters, and the angle between the force and the movement is 0 degrees (since Kyle is lifting the leaf blower straight up). So we have:

work = 1600 N x 6 m x cos(0°)

work = 9600 J

Therefore, the joules of work being put out by Kyle are 9600 J.

Explanation:

The displacement of two interfering light waves are y1=4sinwt and y2=3sin(wt+π/2)The amplitude of the resultant wave is a. 5 b. 7 c. 1 d. 0

Answers

Answer:

Explanation:

Amplitude of first wave a1=4

Amplitude of second wave a2=3

Angle between two waves =Π/2

Resultant amplitude=[tex]\sqrt{a_{1} ^{2}+a_{2} ^{2} +2a_{1} a_{2} cos\alpha }[/tex]

=[tex]\sqrt{4^{2}+3^{2} +2*4*3*cos90 }[/tex]

=5

Answer is a

How did it just snow yesterday in Anaheim hills California????
I would like to know the science behind why it happened when it normally doesn't

Answers

The National Weather Service, a combination of warm air river air & cold air from Alaska combined to produce a dusting of snow to mojave desert sections of Southern Californian valleys on Saturday.In San Bernardino County, Rancho Loma and Fontana experienced a rare snowfall on Saturday.

Does snow fall in Anaheim, California?

On March 1, 2023, a winter storm passed across the area, and snow and graupel were seen falling in Disneyland near Anaheim, California.According to Camacho, the extraordinary incident lasted for roughly 10 minutes.

Where did the snow fall in California?

Conditions in some areas of California are very hazardous.Communities in the Santa Barbara Mountains have been buried by seven feet of snow, and rescue workers are bringing medicine and food to stranded locals.

To know more about Weather Service visit:

https://brainly.com/question/14969460

#SPJ1

The natural abundance of boron-11 is 80.1%. If you have 7,000 boron atoms, how many of them are the boron-11 isotope?

Answers

Answer:

If the natural abundance of boron-11 is 80.1%, then the natural abundance of boron-10, the other stable isotope of boron, is 100% - 80.1% = 19.9%.

To determine how many of the 7,000 boron atoms are the boron-11 isotope, we can use the following steps:

Calculate the number of boron-10 atoms:

19.9% x 7,000 = 1,393

Calculate the number of boron-11 atoms:

80.1% x 7,000 = 5,607

Therefore, out of 7,000 boron atoms, 5,607 are the boron-11 isotope.

Explanation:

A velocity vs. time graph is shown.
Velocity (m/s)
20
16
12
8
4
0
0
Velocity vs Time
1
2
3
Time (s)
4
5
What is the acceleration of the object?
0 m/s²
* 0.25 m/s²2
4 m/s²
8 m/s²

Answers

The acceleration of the object is - 4 m/s².

What is the acceleration of an object?

The acceleration of an object is the measure of change of velocity with change in time of motion.

Mathematically, the formula for acceleration is given as;

a = Δv / Δt

a = ( v₂ - v₁ ) / ( t₂ - t₁ )

where;

v₂ is the final velocityv₁ is the initial velocityt₂ is the final time of motiont₁ is the initial time

From the data given, we have;

velocity (m/s)                     time ( s )

20                                         1

16                                          2

12                                          3

8                                            4

4                                            5

a = ( 16 - 20 ) / ( 2  - 1 )

a = - 4 m/s²

                 

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

A cyclist starts from rest and coasts down a 4.5 degree hill. The mass of the cyclist plus bicycle is 80 kg. The cyclist has traveled 260 m.

a) What was the net work done by gravity on the cyclist? (in J)
Express your answer using two significant figures.

b) How fast is the cyclist going? Ignore air resistance. (m/s)
Express your answer using two significant figures.

Answers

a) The net work done by gravity on the cyclist is equal to the change in the kinetic energy of the cyclist-bicycle system. Since the cyclist starts from rest, the initial kinetic energy is zero. The final kinetic energy can be calculated using the equation:

KE = (1/2)mv^2

where m is the mass of the cyclist-bicycle system and v is the final velocity of the cyclist.

The work-energy principle states that the net work done on an object is equal to its change in kinetic energy:

W_net = KE_final - KE_initial

Since the initial kinetic energy is zero, the net work done by gravity on the cyclist is equal to the final kinetic energy:

W_net = (1/2)mv^2

To calculate the final velocity, we can use the conservation of energy principle, which states that the total mechanical energy of a system is conserved:

E_i = E_f

where E_i is the initial mechanical energy and E_f is the final mechanical energy. Since the cyclist starts from rest, the initial mechanical energy is equal to the gravitational potential energy:

E_i = mgh

where h is the vertical distance the cyclist travels down the hill. We can use trigonometry to calculate the vertical distance:

h = d*sin(theta)

where d is the distance the cyclist travels and theta is the angle of the hill in radians.

Plugging in the given values:

h = 260sin(4.5pi/180) = 20.05 m

Therefore, the initial mechanical energy is:

E_i = (80 kg)(9.81 m/s^2)(20.05 m) = 15742 J

Since there is no non-conservative work done on the system, the final mechanical energy is equal to the initial mechanical energy:

E_f = E_i = 15742 J

The final mechanical energy can also be expressed as the sum of the final kinetic and potential energies:

E_f = (1/2)mv^2 + mgh

Plugging in the known values and solving for v:

(1/2)(80 kg)v^2 = 15742 J - (80 kg)(9.81 m/s^2)(20.05 m)

v = sqrt[(2(15742 J - 15686 J))/80 kg] = 7.0 m/s

Therefore, the net work done by gravity on the cyclist is:

W_net = (1/2)(80 kg)(7.0 m/s)^2 = 1960 J (to two significant figures)

b) The final velocity of the cyclist is 7.0 m/s, as calculated in part a).

If HCl is added to Zn, what would be an expected product?

o Cl₂

o HZn

o ZnCl

o ZnCl₂​

Answers

The expected product would be zinc chloride (ZnCl2).

What is ZnCl2?

Inorganic chemical compounds having the formula ZnCl2 and its hydrates are known as zinc chloride. Nine crystalline forms of zinc chlorides are known; they are colorless or white and very soluble in water. This salt is both hygroscopic and sweet.

Zinc chloride serves as the electrolyte in dry cells. It serves as a condensing agent, a disinfectant, a dehydrator, a wood preservative, and a deodorant.

Learn more about ZnCl2 here:

https://brainly.com/question/14587410

#SPJ1

a bag of same size small balls contain 6 blue balls 5 red balls 5 yellow balls and 4 green balls what is the probality of selecting a blue or green ball on first draw

Answers

Answer:

Below

Explanation:

Blue ( 6)   OR  green ( 4)   is 10 out of  ( 6 + 5 + 5 + 4)

10 / 20 = 1/2 chance of blue OR green

What is the power involved in lifting a 20- kg object 1.0m in 1.0 s?

Answers

Answer:

Explanation:

Power=work done/time

work done=force* displacement

force=mass*acceleration due to gravity

Therefore, power= mass*acceleration due to gravity*displacement/time

20*9.8*1/1=196watts

Calculate the time required for a 6000-newton net force to stop a 1200-kilogram car initially traveling at 10 meters per second. [Show all work, including the equation and substitution with units.]

Answers

Answer:

To solve this problem, we will use the equation for the net force on an object, which is:

net force = mass x acceleration

We can rearrange this equation to solve for acceleration:

acceleration = net force / mass

Once we have the acceleration, we can use the equation for the motion of an object under constant acceleration:

final velocity^2 = initial velocity^2 + 2 x acceleration x distance

We can rearrange this equation to solve for the distance required to stop the car:

distance = initial velocity^2 / (2 x acceleration)

Finally, we can use the equation for average velocity to calculate the time required to travel this distance:

time = distance / average velocity

Substituting the given values into the equations:

net force = 6000 N

mass = 1200 kg

initial velocity = 10 m/s

Using the first equation:

acceleration = net force / mass

acceleration = 6000 N / 1200 kg

acceleration = 5 m/s^2

Using the second equation:

distance = initial velocity^2 / (2 x acceleration)

distance = 10 m/s^2 / (2 x 5 m/s^2)

distance = 10 m

Using the third equation:

average velocity = (initial velocity + final velocity) / 2

final velocity = 0 (since the car is coming to a stop)

average velocity = 10 m/s / 2

average velocity = 5 m/s

Using the fourth equation:

time = distance / average velocity

time = 10 m / 5 m/s

time = 2 seconds

Therefore, the time required for a 6000-newton net force to stop a 1200-kilogram car initially traveling at 10 meters per second is 2 seconds.

Please help (50 points and Brainly)

Answers

The mass of the object with kinetic energy of 43200 Joules and velocity of 23 m/s will be 163.33 Kg.

What is Kinetic energy?

Kinetic energy is the energy of an object which is present due to the state of motion of the object. Kinetic energy depends upon the mass and velocity of the object. The SI unit of Kinetic energy is meter per second square (m/s²).

KE = 1/2 mv²

where, KE is the Kinetic energy,

m is the mass of the object,

v is the velocity of the object.

KE = 43200 Joules,

v = 23 m/s

KE = 1/2 mv²

m = 2 KE/ v²

m = 2 × 43200/ 23 × 23

m = 86400/ 529

m = 163.33 kg

Learn more about Kinetic energy here:

https://brainly.com/question/26472013

#SPJ1

Will sound move faster or slower in water? Why

Answers

Answer:

In water, the particles are much closer together, and they can quickly transmit vibration energy from one particle to the next. This means that the sound wave travels over four times faster than it would in air, but it takes a lot of energy to start the vibration.

Explanation:

Answer:

slower as it is more dense in water

Explanation:

Two charges, Q1
= 10 nC
and Q2
= -3.0 nC
, are 15 cm
apart. Find the strength of the electric field halfway between the two charges.
Express your answer with the appropriate units.

Answers

Explanation:

E1 = k Q1 / (0.075 m)^2

= 9 x 10^9 Nm^2/C^2 * 10 x 10^-9 C / 0.075^2 m^2

= 400 N/C

E2 = k Q2 / (0.075 m)^2

= 9 x 10^9 Nm^2/C^2 * (-3 x 10^-9 C) / 0.075^2 m^2

= -120 N/C

Since the electric fields due to the two charges are in opposite directions, we can find the net electric field at the midway point by taking the difference between the two:

E = E1 - E2

= 400 N/C - (-120 N/C)

= 520 N/C

Approximately how quickly does sound cover 1 kilometre?
a) Instantly
b) 1 second
c) 2 seconds
d) 3 seconds

Answers

Answer:

3 second is the answer of your question

A block of mass 1.0 kg rests on a horizontal surface. The frictional coefficients for the block and surface are μs=0.50 and μk=0.40. (a) What is the minimum horizontal force required to move the block? (b) What is the block’s acceleration when this force is applied?

Answers

The 25N  is the minimum horizontal force required to move the block, 20N force is applied.

What is mass ?

The amount of matter in a body is referred to as its mass. The kilograms is the kilograms, which is the SI unit of mass (kg). Mass is defined as: Mass = Density/Volume.

What is force ?

A body can change its state of rest or motion when an external force acts on it. It is directed and has a magnitude.

Therefore, 25N  is the minimum horizontal force required to move the block, 20N force is applied.

Learn more about mass from the given link.

https://brainly.com/question/86444

#SPJ1

At what angle should a circular road be banked so that a car running at 50 Km/hr be safe to go round the circular turn of 200 m radius? ​

Answers

Angle of 5.61° should  be banked so that car running at 50 Km/hr be safe to go round the circular turn of 200 m radius.

What is Banking of Road?

The process of raising outer edge of the road over its inner edge through certain angle θ is called as banking of road. Banking of road is nothing but the process of making the angle between the surface of road to horizontal surface of the road. The angle made by this two surfaces is called as angle of banking. Banking of road is done for safe turn at high speed.

Angle of banking is given by the formula,

tanθ = v²÷Rg

Where θ = angle of banking

           R = Radius of circular turn

           g = acceleration due to gravity

Given,

velocity of the car v = 50km/hr = 13.88 m/s

Radius of the circular orbit = 200 m

From formula,

tanθ = 13.88² ÷ (200×9.8)

tanθ = 0.09829

θ = tan⁻¹(0.09829)

θ = 5.61°

Hence angle must be backed at 5.61° to have safe turn.

To know more about banking of road, click :

https://brainly.com/question/30817030

#SPJ9

Pleas Help

Questions are in the picture

Answers

Writing by hand as opposed to printing is referred to as handwriting. The term "handwriting" has been more or less limited to denote the distinctive writing style that is unique to each individual.

What is Handwriting?

Schools placed a strong emphasis on teaching handwriting before the common usage of typewriters, when it had more practical value.

At the elementary schools, scales for evaluating the quality of the script from grade to grade were developed, and a number of meticulous investigations of the handwriting movements were conducted.

Research have shown that during writing, both the grip pressure on the penholder and the tip pressure on the paper change continuously. Moreover, the speed of writing is not constant and is dependent on the type of stroke being used.

Therefore, Writing by hand as opposed to printing is referred to as handwriting. The term "handwriting" has been more or less limited to denote the distinctive writing style that is unique to each individual.

To learn more about Handwriting, refer to the link:

https://brainly.com/question/25791218

#SPJ1

7. A man running a 100 m race accelerates uniformly from rest for the first 7 seconds and reaches a velocity of 10 m s. He maintains this velocity for the rest of the race. His time for the race is 12 s. Sketch a velocity-time graph. Calculate (a) the value of T, (b) the acceleration,​

Answers

(a) Time taken, T is 11.83 s

(b) Acceleration is 1.428 m/s²

What is uniform acceleration ?

A body is said to be in uniform acceleration when it is moving in a straight line with an increase in velocity in equal intervals of time.

Here,

s = 100 m

v = u + at

a = (v - u)/t = (10 - 0)/7

a = 10/7 m/s²

(a) s = ut + 1/2 at²

   100 = 0 + 1/2 x 10/7 x t²

    t² = 140

    t = √140 = 11.83 s

(b) Acceleration, a = 10/7 =1.428 m/s²

Hence,

(a) Time taken, T is 11.83 s

(b) Acceleration is 1.428 m/s²

To learn more about uniform acceleration, click:

https://brainly.com/question/28641931

#SPJ1

A person is being pulled away from a burning building as shown in the Figure. The angle between the vertical direction and T1 is 38.4, and the angle between T2 and the horizontal direction is 42.7. If the tension in T2 is 194.2 N. What is the weight of person W in a unit of N?

Answers

The weight of the person is approximately 650.2 N.

Steps

Let W be the person's weight and T1 be the tension in the rope that creates a 38.4-degree angle with the vertical. Let T2 represent the rope's tension at a 42.7-degree angle to the horizontal.

The net force in the horizontal direction is given by:

T2 - T1*sin(38.4) = 0

Solving for T1, we get:

T1 = T2 / sin(38.4) = 194.2 N / sin(38.4) ≈ 311.1 N

The net force in the vertical direction is given by:

W - T1cos(38.4) - T2sin(42.7) = 0

Substituting the values we know, we get:

W - 311.1cos(38.4) - 194.2sin(42.7) = 0

Solving for W, we get:

W ≈ 650.2 N

Therefore, the weight of the person is approximately 650.2 N.

learn more about tension here

https://brainly.com/question/24994188

#SPJ1

All of the following describe the region in which an electron is most likely to be found
EXCEPT
orbital
isotope
cloud
path

Answers

All of the following describe the region in which an electron is most likely to be found except an isotope. Thus, the correct option is B.

What is an isotope?

Isotopes can be defined as the distinct nuclear species of the same element. They have the same atomic number and the position in the periodic table as the main atom, however they differ in number of nucleons due to different numbers of neutrons in their nucleus.

Orbital is a volume of space present within an atom where an electron is most likely to be found. The s-orbitals are spherical in shape.

Cloud is the region present near the nucleus where the probability of finding an atom is highest. Cloud are the region of negative charge.

Path can also be defined as orbital. It is the exact route in which the electrons travel in an atom.

Therefore, the correct option is B.

Learn more about Isotopes here:

https://brainly.com/question/12955625

#SPJ1

6.
a) State the quadratic function that would be represented by a freely falling ballast bag that starts from a
resting position on a balloon 1000 feet above the ground.

Answers

Answer:

h(t) = -16t^2 + 1000

Explanation:

The quadratic function that represents the motion of a freely falling ballast bag that starts from a resting position on a balloon 1000 feet above the ground is given by the equation h(t) = -16t^2 + 1000, where h(t) is the height of the ballast bag in feet at time t seconds after it is released, and -16t^2 represents the effect of gravity on the ballast bag as it falls.

Answer:

-16t^2 + 1000

Explanation:

A water pump of 1.2kw rating pumps 480kg of water into an overhead tank at a height of 5m in 30 seconds. The efficiency of the pump os what​

Answers

The efficiency of the pump defines its capacity to pump water upto a certain height under applied rated power. The formula for the efficiency of the pump can be given by,

η=power required/rated power

Answer and

0.654

CAN SOMEBODY HELP ME WITH ALL THIS PLEASE

Answers

Electromagnetic induction is the process of generating an electric current by moving a conductor through a magnetic field.

What is electromagnetic induction?

As you move the magnet in and out of the coil, it induces a current in the coil, which generates an electrical signal. This is known as electromagnetic induction, and the strength of the induced current depends on the strength and speed of the magnetic field.
If you leave the magnet in the middle of the coil, there will be no movement of the magnetic field, and therefore no current will be induced in the coil.
This happens because when the magnet moves in and out of the coil, it creates a changing magnetic field, which induces an electrical current in the coil due to Faraday's law of electromagnetic induction. However, when the magnet is stationary, there is no change in the magnetic field, so no current is induced.
If you increase the number of loops in the coil, the induced current will be stronger, and this will cause the light bulb to glow brighter. This happens because the increased number of loops increases the magnetic flux linkage, which is the measure of how much of the magnetic field passes through the coil. The more magnetic flux that passes through the coil, the stronger the induced current and the brighter the light bulb.

Learn more about electromagnetic induction, here:

https://brainly.com/question/26334813

#SPJ1

2.4.5 conservation of energy lab Describe at least one part of the experimental procedure that you thought was essential to getting good results. Did you find that certain steps in the procedure had to be followed carefully in order to get consistent results? If you wanted better results, do you think there is a step that could have been added to the procedure?

Answers

This may involve carefully measuring and recording the initial and final energies of the system, controlling for external factors such as friction and air resistance, and using appropriate instruments and equipment with minimal energy loss.

What is Energy?

It is a scalar quantity that can be transferred between objects or converted into different forms, such as kinetic, potential, thermal, or electrical energy. Energy cannot be created or destroyed, but it can be transformed from one form to another. The SI unit of energy is the joule (J), but other units such as calories, electronvolts, or British thermal units (BTU) are also commonly used depending on the context. Energy is a fundamental concept in physics and plays a crucial role in many fields, including mechanics, thermodynamics, chemistry, and astronomy.

It is also important to follow the experimental procedure carefully and consistently to ensure that the results are reproducible and consistent. This may involve controlling for variables such as the angle of release, the height of the release, and the distance traveled by the object.

Learn more about Energy from given link

https://brainly.com/question/13881533

#SPJ1

Exam Instructions
Question 8 of 20:
Select the best answer for the question
8. Which of the following is a healthy example of practicing self-care?
OA. Using junk food to cope with stress
OB. Spending extra hours working at the office
OC. Reflecting on a happy memory
OD. Avoiding friends and family for weeks
Mark for review (Will be highlighted on the review page)
o Previous Question
Next Question >>

Answers

Self-care can be demonstrated in a healthy way by recalling a happy memory.

Is self-care included in reflection?

The first step toward self-care is allowing yourself to be honest and vulnerable. Through self-reflection, you can at last let out all that you've been keeping down. Your journal is your very own private platform on which you can record your successes, anxieties, and worries.

What good examples of self-care do you have?

Taking care of oneself exercises can go from proactive tasks, for example, practicing and practicing good eating habits, to mental exercises like perusing a book or rehearsing care, to otherworldly or social exercises, for example, imploring or getting lunch with a companion.

To know more about Self-care visit :-

https://brainly.com/question/30854492

#SPJ1

a professional football player kicks a football eith an initial velociry v= (6.0 m/s) x + (20.0 m/s) y determine how long the football stays in yhe air as well as the horizontal displacement

Answers

The horizontal displacement is given by the product of the horizontal component of the initial velocity and the time of flight, so it is 6 m/s x 0.828 s = 4.968 m.

What is initial velocity?

Initial velocity is the speed of an object at the start of its motion. It is usually represented by the letter u in equations. Initial velocity is important in determining the final velocity, displacement, and acceleration of an object after a certain amount of time.

The horizontal displacement is simply the product of the horizontal component of the initial velocity, 6 m/s, and the time the ball is in the air. To determine the time the ball stays in the air, we can use the formula for the time of flight of an object under the influence of gravity:
t = 2v sin θ / g
Where t is the time of flight, v is the initial velocity, θ is the angle of the initial velocity vector with respect to the horizontal, and g is the acceleration due to gravity (9.8 m/s2).
In this case, the initial velocity vector is (6.0 m/s) x + (20.0 m/s) y, so the angle is given by the inverse tangent of the ratio of the y-component to the x-component, which is inverse tangent (20.0/6.0) = 77.4°.
Substituting the values into the equation, we get:
t = 2 (6.0 m/s) sin 77.4° / 9.8 m/s2 = 0.828 s
The horizontal displacement is given by the product of the horizontal component of the initial velocity and the time of flight, so it is 6 m/s x 0.828 s = 4.968 m.

To learn more about initial velocity
https://brainly.com/question/28996913
#SPJ1

Calculate the mass of a solid iron sphere that has a diameter of 6.6 cm if its density is 7850 kg/m3

Answers

Answer:0.216 kg

Explanation:

The volume of a sphere is given by the formula:

V = (4/3)πr^3

where r is the radius of the sphere. Since the diameter of the iron sphere is 6.6 cm, its radius is half of that or 3.3 cm (0.033 m).

The volume of the sphere is:

V = (4/3)π(0.033 m)^3

V = 2.76 x 10^-5 m^3

The density of iron is 7850 kg/m^3. We can use the density formula to find the mass of the sphere:

density = mass / volume

mass = density x volume

mass = 7850 kg/m^3 x 2.76 x 10^-5 m^3

mass = 0.216 kg

Therefore, the mass of the solid iron sphere is 0.216 kg.

Answer:

Density of iron = 7870 kg/m3 diameter of sphere = 3.00 cm radius of sphere r = 1.5 cm =0.015 m Volume of sphere V = (4/3) * pi* (r^3) = (4/3) x

Explanation:

I’n a miracle of modern physics a 20.0-kg frictionless…

Answers

The acceleration of the lawn mower is  1.25 m/s².

The velocity of the lawn mower at the given time is 6.25 m/s.

What is the acceleration of the lawn mower?

The acceleration of the lawn mower is calculated by applying Newton's second law of motion as shown below.

Fx = ma

where;

Fx is the horizontal component of the forcem is the mass of the lawn mowera is the acceleration of the lawn mower

F cosθ = ma

where;

θ is the inclination of the force.

a = ( F cosθ ) / m

a = ( 50 N  x  cos60 ) / 20 kg

a = 1.25 m/s²

The velocity of the lawn mower at the given time is calculated as;

v = at

v = 1.25 m/s²  x 5 s

v = 6.25 m/s

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

Other Questions
It is to focus on the main idea by repeating a key word or phrase. This is to keep you as a writer as well as your readers on track on the idea being discussed 1. Vaccination increases the number of:different receptors that can recognize a pathogenepitopes that the immune system can recognizeMHC molecules that can present an antigenwhite blood cells capable of recognizing a particular pathogen2. Breast feeding confers what type of immunity to an infant?Artificially acquired activeArtificially acquired passiveNaturally acquired activeNaturally acquired passive3.Thimerosal was once part of the MMR vaccine but has been phased out of that vaccine formulation over time.TrueFalse4. What percent of the population has to be immunized in order for herd immunity to work?15%38%79%94%5.Which vaccine type elicits the strongest immune response?inactivated/killedlive attenuatedrecombinanttoxoid How did the government of non-Axis nations respond to the issue of genocidal war crimes in Europe? 14. Consider Covidstan has the following characteristics: Y=F(K,L)=10(KL) 1/2, MRK (Marginal Product of Capital)=5(K/L)1/2, K=400, L=100, C=260+0.8(Y-T), I=230-5r, NX=X-IM=0, G=100, T=200 and output is determined by the equation Y=C+L+G+NXa. what is the level of national income (Y) in this economy? how much of the national income goes to the workes and how much to the capital owners? how much does the households save? how much doe the governmet save?b. find the equilibrum interest rate in the market c. assume covid reduces the labour force to 81. remaining consumers become cautious so change their consumption to C-240+0.8 (Y-T).using a keynesian cross diagram show what happens to GDP and calculate the new interest rate How did the peasants' view of King Richard differ from the reality of his character and motivations? Explain. a. What is 6%of 34 ? b. 17 is what percent of 34 ? c. 18 is30%of what number? d. What is 7% of 49 ? 8. Copy the number line and fill in the blank so that each tick mark is Please Answer these questions asapQuestion 1: Find the radius of the smallcircle.A = 125 pieR = 15r = ?Question 2: Find the shaded area. Miguel volunteers at his local food pantry and takes note of how much money is donated each day during a 10-day fundraising phone-a-thon. Below is the graph that represents the data that he collected. The slope of the line that represents the data that Miguel collected is 25, and the y-intercept is 50. What do the slope and y-intercept represent in Miguels situation? What are the characteristics of animal hair? Pls help, will give brainliest. solve questions 3 and 4, please The shortcut to designer babies is gene? HELP WILL MARK BRAINLIST IF CORRECT Identify the main advantages and disadvantages of the two-party system in US. According to your opinion, which is better, a two party or a multi-party system? Explain your answer. This is a question given to me in bio 206 Principles of Genetics . Could you please help me solve and explain thoroughly? I still get confused with the drawing and diagram info. I will post questions and then my work. I know it's wrong. I missed big points because of this problem.A Rare Recessive Disorder PKU is a rare recessive disorder. John whose mother has the disease marries Jane whose aunt (mom's side) has the disease. If they have one child, what is the probability that the child will have PKU? (Hint: Draw out the pedigree for this family on scratch paper to help solve this problem). Please helpWhich point on the number line most closely represents?ABCD The sample space for tossing three fair coins is {hhh,hht,hth,htt,thh,tht,tth,ttt}. What is the probability of exactly two heads? Math 1149 Worksheet Chapter 8 Lesson 4 1. 1-cosx / sinx 2. Cos X Cos x. 3. (sin^2 + tan^2 u + cos^2 u) / (sec u) 4. (sec^2 x tan^2 c) / (cos^2 x + sin^2 x)5. (sec^2 + csc^2 x) - (tan^2 x + cot^2 x) 6. tan x cot x 7. cot u sin u 8. sec (-x) cos (-x)9 cot (-) tan (-)10. sec^2 (-x) tan^2 (-x)11. sec u sin u A data set lists the favorite choice of movie genres. Which of the following charts could be used to display the data, and why? The points H(8,1), I(7,-5), and J(1, -4) form a triangle. Find the desired slopes and lengths, then fill in the words that characterize the triangle. - slope of HI = ____ slope of IJ = ___ slope of HJ= ___- length of HI = ___ length of IJ = ___ length of HJ = ___Triangle HIJ is _______ Submit Answer = __