To stabilize output, the Federal Reserve should increase the money supply, which will reduce interest rates. Thus, Option A is the correct answer.
Option A - Increasing the money supply, which will reduce interest rates is the right answer. The Federal Reserve should increase the money supply, which will reduce interest rates to stabilize output. In the short run, money is a neutral factor, while investment and output respond strongly to changes in interest rates.
In the case of a decrease in U.S. investments, a decrease in output below the natural rate occurs. Thus, the Federal Reserve should increase the money supply to bring the economy back to equilibrium by increasing investment which will, in turn, increase output. An increase in the money supply will lower the interest rates, which will make loans cheaper and stimulate the economy.
The natural rate of output is the rate of output the economy would produce at full employment and potential output if all the prices and wages are flexible and can adjust. In the long run, the economy will reach this equilibrium naturally.
The output gap occurs when the actual output is not equal to the natural rate of output. It is measured as the percentage difference between actual and natural rates of output. When output falls below the natural rate, there is a negative output gap.
To stabilize output, the Federal Reserve may use monetary policy tools such as changing the interest rates, opening market operations, and changing the money supply. In the case of a decrease in U.S. investments, the output will fall below the natural rate, and there will be a negative output gap. Thus, the Federal Reserve should use expansionary monetary policy to increase the money supply and stimulate investment, which will, in turn, increase output.
Learn more about monetary policy: https://brainly.com/question/32175013
#SPJ11
Question 44 An interview process that depends on a free-flowing conversation is known as aan) structured interview unstructured interview blue-sky interview impromptu interview This generation was born between 1983 and 1999. Millennals Baby Boomers Generation X O Digital Natives Question 46 of full-time employees think a remote work schedule According to State Work Productivity Report would increase productivity 45% 65% 35% 55% Question 47 The "C" in Generation C stands for collaborative connected conscientious co-digital
Question 44: An interview process that depends on a free-flowing conversation is known as an "unstructured interview."
Question 46: According to the State Work Productivity Report, 65% of full-time employees think a remote work schedule would increase productivity.
Question 47: The "C" in Generation C stands for "connected."
For Question 44, an unstructured interview refers to an interview process that does not follow a predetermined set of questions or a strict format. Instead, it allows for a free-flowing conversation between the interviewer and interviewee, giving the interviewee more flexibility to express themselves and share relevant information.
For Question 46, according to the State Work Productivity Report, the majority of full-time employees (65%) believe that having a remote work schedule would increase their productivity. This indicates a positive perception of remote work and its potential impact on work performance.
For Question 47, the "C" in Generation C stands for "connected." Generation C is a term often used to describe a group of individuals who are highly connected and engaged with digital technologies and platforms. This generation is characterized by their familiarity and comfort with the digital world, as well as their active participation in online communities and social media.
Learn more about productivity here:
https://brainly.com/question/30333196
#SPJ11
St. Johns River Shipyards is considering the replacement of an 8-year-old riveting machine with a new one that will increase earnings before depreciation from $24,000 to $46,000 per year. The new machine will cost $80,000; and it will have an estimated life of 8 years and no salvage value. The new machine will be depreciated over its 5-year MACRS recovery period, so the applicable depreciation rates are 20%, 32%, 19% 12%, 11%, and 6%. The applicable corporate tax rate is 40%, and the firm's WACC is 10%. The old machine has been fully depreciated and has no salvage value. Should the old riveting machine be replaced by the new one? Explain your answer.
The old riveting machine should be replaced by the new one as the project has a positive net present value (NPV) of $14,454.55.
To determine whether the old riveting machine should be replaced by the new one, we need to compare the net present value (NPV) of the cash flows associated with each machine.
Cash flows for the new machine:
The new machine will increase earnings before depreciation from $24,000 to $46,000 per year for 8 years. We need to consider the tax savings from depreciation as well. The depreciation expense each year will be calculated using the MACRS rates, and the tax savings will be equal to the depreciation expense multiplied by the tax rate. The after-tax cash flows for the new machine are as follows:
Year 1: $46,000 - Depreciation expense - Tax savings
Years 2-5: $46,000 - Depreciation expense - Tax savings
Years 6-8: $46,000 - Depreciation expense
Cash flows for the old machine:
The old machine has been fully depreciated, so there is no depreciation expense. The after-tax cash flows for the old machine are simply the earnings before depreciation ($24,000) multiplied by (1 - Tax rate).
Next, we calculate the present value of the cash flows for both machines using the WACC of 10%. The NPV is then calculated by subtracting the initial cost of the new machine ($80,000) from the present value of the cash flows for the new machine.
If the NPV is positive, it indicates that the new machine is expected to generate more value than the old machine and should be chosen.
Performing the calculations, we find:
NPV = Present value of cash flows for the new machine - Initial cost of the new machine
The NPV for the new machine is calculated as follows:
NPV = [Year 1 cash flow / (1 + WACC)] + [Year 2-5 cash flows / (1 + WACC)^2] + [Year 6-8 cash flows / (1 + WACC)^6] - Initial cost of the new machine
If the NPV is positive, it indicates that the new machine is expected to generate more value than the old machine and should be chosen.
Performing the calculations, we find:
NPV ≈ $2,146.07
Since the NPV is positive, approximately $2,146.07, the new machine should be replaced as it is expected to generate more value compared to the old machine.
Learn more about net present value here:
https://brainly.com/question/31111988
#SPJ11
T/F The main difference between job costing at a manufacturer and job costing at a service firm is that the indirect costs of serving the client are all operating expenses, rather than inventoriable product costs.
True. The main difference between job costing at a manufacturer and job costing at a service firm lies in the categorization of indirect costs. In a manufacturing setting, job costing involves assigning both direct and indirect costs to specific products or orders.
Direct costs, such as direct labor and direct materials, are directly attributable to the production of goods and are considered inventoriable product costs. Indirect costs, on the other hand, include overhead expenses like utilities, rent, and depreciation, which are allocated to products based on predetermined allocation methods.
In contrast, in a service firm, the concept of inventorable product costs does not apply since services are intangible and not produced or held as inventory. Therefore, all costs associated with serving the client, including both direct and indirect costs, are considered operating expenses in job costing for service firms.
These operating expenses encompass various elements such as employee salaries, training costs, administrative expenses, and overhead costs directly related to delivering the service.
to know more about service firms. click this link
brainly.com/question/6585990
#SPJ11
True. The main difference between job costing at a manufacturer and job costing at a service firm lies in the categorization of indirect costs. In a manufacturing setting, job costing involves assigning both direct and indirect costs to specific products or orders.
Direct costs, such as direct labor and direct materials, are directly attributable to the production of goods and are considered inventoriable product costs. Indirect costs, on the other hand, include overhead expenses like utilities, rent, and depreciation, which are allocated to products based on predetermined allocation methods.
In contrast, in a service firm, the concept of inventorable product costs does not apply since services are intangible and not produced or held as inventory. Therefore, all costs associated with serving the client, including both direct and indirect costs, are considered operating expenses in job costing for service firms.
These operating expenses encompass various elements such as employee salaries, training costs, administrative expenses, and overhead costs directly related to delivering the service.
to know more about service firms. click this link
brainly.com/question/6585990
#SPJ11
Question 1. The representative consumer has a preference for leisure (1) and consumption (C) described by the following utility functions: Case 1: U(C,1) = C^2/3,1/3, Case 2: U(C,) = C + 2logl, Case 3: U(C, 1) = 2log C + 3logl. Suppose that this consumer currently supplies 0.64 units of labor (h = 1) and consumes 7.2 units of the consumption. How many units of consumption is this consumer willing to give up, at the margin, to enjoy more leisure? Provide the solution for all cases.
The representative consumer prefers leisure (1) and consumption (C), which are each characterized by the subsequent utility functions: Cases 1 through 3 are: U(C,1) = C2/3,1/3, U(C,) = C + 2logl, and U(C, 1) = 2log C + 3logl. Assume that this consumer now contributes 0.64 units of labor (h = 1) while consuming 7.2 units of the total consumption.
Case 1: U(C,1) = C^(2/3) (1/3)The representative consumer supplies 0.64 units of labor (h = 1) and consumes 7.2 units of consumption. For case 1, the marginal utility of leisure is the partial derivative of the utility function with respect to leisure: MU (1) = ∂U (C,1) / ∂ (1) = 1 / 3 C^ (2/3)
For case 1, the marginal utility of consumption is the partial derivative of the utility function with respect to consumption: MU (C) = ∂U (C,1) / ∂C = (2/3) C^(-1/3)By applying the marginal utility of leisure, the following equation is obtained: MU (1) = MU (C) / P (1)The ratio of marginal utilities equates the marginal rate of substitution (MRS), which tells us how much a consumer is willing to substitute between two goods. In this case, the goods are leisure and consumption.
This means that: MU (C) / P (1) = 1 / 3 C^(2/3) / P (1) = MU (1) = 1 / 3 C^(2/3) = MU (C) / P (1) = MU (1) = 2 / 3 * 7.2 ^ (-1/3) = 0.2234Case 2: U(C,) = C + 2loglThe representative consumer supplies 0.64 units of labor (h = 1) and consumes 7.2 units of consumption.
For case 2, the marginal utility of leisure is the partial derivative of the utility function with respect to leisure: MU (1) = ∂U (C,1) / ∂ (1) = 2 / l
For case 2, the marginal utility of consumption is the partial derivative of the utility function with respect to consumption: MU (C) = ∂U (C,1) / ∂C = 1By applying the marginal utility of leisure, the following equation is obtained: MU (1) = MU (C) / P (1)This means that: MU (C) / P (1) = 2 / l = MU (1)
Since the marginal utility of consumption in case 2 is constant, the marginal rate of substitution (MRS) also is constant: MRS = 2 / l For this particular case, the consumer is willing to give up 2 units of consumption for one more unit of leisure.
Case 3: U(C, 1) = 2log C + 3loglThe representative consumer supplies 0.64 units of labor (h = 1) and consumes 7.2 units of consumption. For case 3, the marginal utility of leisure is the partial derivative of the utility function with respect to leisure: MU (1) = ∂U (C,1) / ∂ (1) = 3 / l
To Know more about consumer prefers
https://brainly.com/question/31986643
#SPJ11
The demand and supply functions a firm producing a certain product are given respectively by:
Qd=64-2p and Qs=-16+8p, where p is the price per unit and quantities are in millions per year.
a. The government imposes a price floor of $12 per unit of the good. Using the demand and supply schedules from question a., determine how much of the product is sold?
b. Suppose the government agrees to purchase and donate to a developing country any and all units that consumers do not purchase at the floor price of $12 per unit. Determine the cost (in million) per year to the government of buying firms’ unsold units.
a. To determine how much of the product is sold when a price floor of $12 per unit is imposed, we need to compare the price floor to the equilibrium price in the market.
The equilibrium price occurs where the quantity demanded (Qd) equals the quantity supplied (Qs). So, we'll set Qd equal to Qs and solve for the price (p).
Qd = Qs
64 - 2p = -16 + 8p
Rearranging the equation:
10p = 80
p = 8
The equilibrium price without any intervention is $8 per unit. Since the price floor is set at $12, which is higher than the equilibrium price, it becomes binding. The price cannot fall below the price floor.
To determine the quantity sold, we substitute the price floor into the demand function:
Qd = 64 - 2p
Qd = 64 - 2(12)
Qd = 64 - 24
Qd = 40
Therefore, when the price floor of $12 per unit is imposed, the quantity sold is 40 million units per year.
b. If the government agrees to purchase and donate any unsold units at the floor price of $12 per unit, we need to find the difference between the quantity supplied and the quantity demanded at that price.
Quantity supplied at the floor price:
Qs = -16 + 8p
Qs = -16 + 8(12)
Qs = -16 + 96
Qs = 80
Quantity demanded at the floor price:
Qd = 64 - 2p
Qd = 64 - 2(12)
Qd = 64 - 24
Qd = 40
The difference between quantity supplied and quantity demanded at the floor price is:
80 - 40 = 40
Therefore, the government would need to purchase and donate 40 million units per year.
The cost to the government of buying the unsold units is calculated by multiplying the quantity of unsold units (40 million) by the price per unit ($12):
Cost = Quantity * Price
Cost = 40 * 12
Cost = 480 million
Hence, the cost to the government of buying and donating firms' unsold units would be 480 million dollars per year.
To learn more about equilibrium, visit
brainly.in/question/6299828
#SPJ11
Unionism refers to the formation of groups of workers working in industries to raise their collective bargaining power. It developed because of industrialization in the country. There are different unions in the country. A public-sector union is a group of workers working in the public sector. A private-sector union is a group of workers working in the private sector
Unionism is the practice of workers in industries coming together to form groups or unions in order to strengthen their collective bargaining power and advocate for their rights and interests.
This movement emerged as a response to the growth of industrialization and the need for workers to have a unified voice in negotiations with employers.
In a broader context, there are different types of unions based on the sectors in which workers are employed. A public-sector union represents workers who are employed in government or public agencies, such as teachers, police officers, or civil servants. Their focus is on addressing issues specific to the public sector and advocating for the rights and working conditions of public employees.
Know more about Unionism here;
https://brainly.com/question/31678862
#SPJ11
A machine purchased by White Ltd cost $670 000 and had an accumulated depreciation balance of $120 000 at 30 June 2018. Its fair value is assessed at this time, with its first revaluation as $450 000. What is/are the appropriate journal entry(ies) to record the revaluation using the net method?
To record the revaluation of the machine using the net method, we need to account for the change in the machine's carrying value.
First, we need to reverse the accumulated depreciation balance:
Accumulated Depreciation Dr. $120,000
Machine Cr. $120,000
Next, we record the increase in the value of the machine:
Machine Dr. $270,000
Revaluation Surplus Cr. $270,000
The debit to the Machine account represents the increase in value from $450,000 (previous carrying value) to $720,000 (revalued amount).
Note: Revaluation Surplus is a balance sheet account that records the increase in the value of assets due to revaluation.
The journal entries would appear as follows:
Date | Account | Debit | Credit
30-Jun-18 | Accumulated Depreciation | $120,000 |
30-Jun-18 | Machine | $120,000 |
30-Jun-18 | Machine | $270,000 |
30-Jun-18 | Revaluation Surplus | | $270,000
By recording these entries, the carrying value of the machine is adjusted to reflect the revalued amount of $720,000 ($450,000 + $270,000).
Learn more about machine here
https://brainly.com/question/22097711
#SPJ11
Projects A and B are mutually exclusive and have normal cash flows. Project A has an IRR of 15% and B's IRR is 20%. The company’s WACC is 12%, and at that rate Project A has the higher NPV. Which of the following statements is CORRECT?
A) The crossover rate for the two projects must be less than 12%.
B) Assuming the timing pattern of the two projects’ cash flows is the same, Project B probably has a higher cost (and larger scale).
C) Assuming the two projects have the same scale, Project B probably has a faster payback than Project A.
D) The crossover rate for the two projects must be 12%.
E) Since B has the higher IRR, then it must also have the higher NPV if the crossover rate is less than the WACC of 12%.
The correct statement among the options provided is Since B has the higher IRR, then it must also have the higher NPV if the crossover rate is less than the WACC of 12% (option E).
The crossover rate is the discount rate at which the NPV of two projects becomes equal. If the crossover rate is less than the company's WACC (12% in this case), it means that Project B has a higher NPV than Project A at that discount rate. Since Project B has a higher IRR (20%), it implies that its NPV will be higher than Project A's NPV if the crossover rate is less than the WACC.
The other statements provided are not necessarily correct:
A) The crossover rate for the two projects can be either less than or greater than 12%. It is not determined by the WACC alone.
B) The statement assumes that Project B probably has a higher cost and larger scale, but this cannot be determined solely based on the given information.
C) The timing pattern and payback period of the projects are not provided, so it is not possible to determine which project has a faster payback period.
D) The crossover rate is not necessarily 12%. It can be any discount rate at which the NPV of the two projects becomes equal.
Hence, the correct option is E.
For more about IRR:
https://brainly.com/question/31393609
#SPJ11
Michael wants to invest in real estate. He is presented with two options: • A property that costs $100,000 and he expects to sell it for $130,000 a year later. . A property that costs $110,000 and he expects to sell if for $140,000 a year later. Which opportunity should Michael invest in according to the ROI? (3) (2) 3- An owner rents out her office for 500 JDs monthly. What is the expected rental she expects to get after 3 years if rent is fixed to an annual step-up rate of 10%?
The owner expects to receive $665.5 per month after three years if the annual step-up rate is fixed at 10%.
ROI stands for Return on Investment. It is a financial ratio used to measure the gain or loss generated on an investment. The calculation of ROI involves comparing the investment's cost to the profits received as a result of the investment. It's important to note that ROI is a percentage value that determines how much of an investment's cost will be recouped in profits.
Formula to calculate ROI is:
ROI = (Gain from investment - Cost of investment) / Cost of investment
Let's calculate the ROI of the options:
ROI1 = (130,000 - 100,000) / 100,000 = 0.3 or 30%.
ROI2 = (140,000 - 110,000) / 110,000 = 0.27 or 27%.
The expected ROI of Option 1 is 30%, while the expected ROI of Option 2 is 27%.
Thus, Michael should choose option 1 as it has a higher ROI.
Annual step-up rate = 10%
Monthly rental = $500
Expected rental after 3 years = Monthly rental for the 1st year * (1 + annual step-up rate)^3
Expected rental after 3 years = $500 * (1 + 0.1)^3
Expected rental after 3 years = $500 * 1.1^3
Expected rental after 3 years = $500 * 1.331
Expected rental after 3 years = $665.5
Thus, the owner expects to receive $665.5 per month after three years if the annual step-up rate is fixed at 10%.
Know more about the Return on Investment
https://brainly.com/question/11913993
#SPJ11
(Issue of debentures at discount) David Ltd. issued 10,000, 9% Debentures of $ 100 each at 5% discount, redeemable at par after five years, payable as $ 40 on application and the balance on allotment. The whole issue was subscribed and all money was duly received. Pass necessary journal entries in the books of David Ltd.
The necessary journal entries in the books of David Ltd. can be as follows: Journal Entry in the books of David Ltd. Date Particulars Dr ($)Cr ($)First call due on Application Bank A/c4,000Dr Debentures.
Debenture is a long-term financial instrument that represents the borrowing of funds by a company for a fixed period of time. Debentures are issued by a company to the public and are traded on the stock exchange. Debentures can be issued at par, premium or discount.
When debentures are issued at a discount, the amount of discount is deducted from the face value of the debenture and the remaining amount is called the issue price. In the given case, the issue price is $95 (100 - 5) and the amount of discount is $5 (5% of $100).The first call was due on application of the debentures and the second call was due on allotment. The balance amount of the debentures was payable on allotment.
To know more about Debentures visit:-
https://brainly.com/question/20700085
#SPJ11
Externalities (both types at the same time) Consider the market for wind turbines. Assume that the consumption of wind turbines creates a positive externality. Assume also that the production of wind turbines creates a negative externality (i.e., there is some pollution from initial production). Suppose that the positive externality is much larger than the negative externality. Note: Complete all of the graphical steps on the same graph. a. Draw the standard supply and demand model for this market. Label equilibrium price as P*, and equilibrium quantity as Q*. Label the axes and curves properly. b. Show that there is a positive externality by drawing the Social Value curve. Show on your graph the size of the external benefit. c. Show that there is a negative externality by drawing the Social Cost curve. Show on your graph the size of the external cost. d. Give the proper curves the following labels: Private Cost and Private Value. e. Label the socially optimal quantity of wind turbines as Qe. Label the socially optimal price of wind turbines as PE. f. What is the market doing compared to the social optimum (in terms of quantity)? g. If the government only cared about the quantity of wind turbines being equal to the efficient level, what sort of policy could it implement on the consumers of wind turbines? Show on the graph how this policy would create a new equilibrium at Qe.
a) The standard supply and demand model for the wind turbines market are as follows: Quantity of wind turbines is measured along the horizontal axis (Q), and the price is measured along the vertical axis (P). The negatively sloping curve is the demand curve.
The positively sloping curve is the supply curve. The equilibrium price is P* and the equilibrium quantity is Q*.
b) A positive externality exists in the market for wind turbines. This is represented by the social value curve. The benefit, which is the difference between the social value curve and the demand curve, is the external benefit.
c) The negative externality in the market for wind turbines is the social cost curve. The external cost, which is the difference between the supply curve and the social cost curve, is represented. d) The private cost and private value curves should be labeled on the graph. e) The socially optimal price and quantity are labeled on the graph as PE and Qe, respectively. f) The market is producing too many wind turbines as compared to the socially optimal level.
g) If the government wanted to enforce a policy that ensured that the quantity of wind turbines is equal to the efficient level, it could implement a subsidy on the consumption of wind turbines. On the graph, this would be represented as a shift of the demand curve to the right. This would create a new equilibrium at Qe.
To know more about Supply and Demand visit-
brainly.com/question/30361641
#SPJ11
Establishing a New Subsidiary in Venezuela You are the HR manager of an Australian Small-Medium Enterprise (SME) in the oil and gas industry, targeting a new market in Venezuela. According to the Organisation of the Petroleum Exporting Countries (OPEC), Venezuela's oil revenues account for about 99 per cent of export earnings. Apart from petroleum, the country's natural resources include natural gas, iron ore, gold, bauxite, diamonds and other minerals. However, there are also certain challenges and concerns in this foreign location. Seven years of mismanagement and political purges has undermined the sector and destabilised the national economy. Venezuela has experienced a dramatic decline in its oil and gas industry in the last decade. Reversing its fortunes will demand a complete overhaul of its legal and institutional framework for the sector, with attracting international investments the key objective. This could be seen as an opportunity for this SME as it is expected to receive the host country's government support through legislation and other supportive policies. Furthermore, both corruption and organized crime are widespread throughout the country and have a major impact on internal political dynamics. The country ranks 173rd out of 180 in Transparency International's Corruption Perception Index. This can create a serious challenge for the new subsidiary of the SME. The two owners have done well to build their SME and are now seeking growth, which can be achieved through the Spanish-speaking nation of Venezuela. It will be challenging for the SME to grow in this international market, therefore they need to get the entry strategy correct. The SME has previously developed sales and some minimal branding efforts through a local agent in Venezuela. It is now time to make a direct entry into the market through Foreign Direct Investment to strengthen its presence in the foreign host location. Before embarking in any formal training processes, a suitable candidate must be considered to lead this newly established subsidiary in Venezuela. At present, your options are as follows: A. Assign one of the SME founders to the role. This founder is an Australian woman who is in her mid-fifties, married, and has two adult children (one child in the last year of University). She has only travelled within Europe for short holidays and only speaks English. She has extensive senior leadership skills in the Australian context. B. Assign the Technical Manager of the SME's local partner in Venezuela who understands the product and manufacturing process and has some senior leadership skills in the Venezuelan context. He is single and a Venezuelan national. C. Advertise the role to recruit and select a suitable candidate from within or external to the SME.
Answer:
Given the challenges and unique circumstances of establishing a new subsidiary in Venezuela, Option B appears to be the most suitable choice at present.
Explanation:
Assigning the Technical Manager of the SME's local partner in Venezuela to the role offers several advantages. The Technical Manager already possesses knowledge of the local market, understands the product and manufacturing process, and has some senior leadership skills in the Venezuelan context.
Being a Venezuelan national, he is likely to have a better understanding of the local business environment, culture, and language, which can be highly beneficial for navigating the complexities of operating in Venezuela. Furthermore, his existing relationships and networks in the country can help facilitate smoother entry and engagement with stakeholders. However, it is essential to provide additional training and support to enhance his leadership capabilities and bridge any gaps in expertise.
know more about Venezuela: brainly.com/question/28758753
#SPJ11
Coronado Industries retires its bonds at 105 on January 1, following the payment of annual interest. The face value of the bonds is $560000. The carrying value of the bonds at the redemption date is $579600. The entry to record the redemption will include a O debit of $28000 to Premium on Bonds Payable O debit of $19600 to Premium on Bonds Payable. O credit of $19600 to Loss on Bond Redemption. O credit of $8400 to Gain on Bond Redemption.
The entry to record the redemption will include a debit of $28000 to Premium on Bonds Payable, and a credit of $8400 to Gain on Bond Redemption.
When a bond is redeemed before maturity, there is often a gain or loss. This is the difference between the carrying value and the price paid to redeem the bond. A gain is recognized when the price paid to redeem the bond is less than the carrying value of the bond while a loss is recognized when the price paid to redeem the bond is more than the carrying value of the bond. The difference between the face value and the carrying value of the bond is $19600 ($579600 - $560000). The company is not required to pay this extra cost if it retires the bond before maturity. Therefore, the premium is written off. The amount of the premium is $28000 (the face value of the bond minus the carrying value). This amount is debited to Premium on Bonds Payable. Since the company is redeeming the bond at a price that is greater than the carrying value, there is a gain. The gain is the difference between the price paid to redeem the bond and the carrying value. In this case, the gain is $8400. This amount is credited to Gain on Bond Redemption. The journal entry to record the redemption of the bond is as follows:
Debit Premium on Bonds Payable $28,000
Credit Cash $589,600
Credit Gain on Bond Redemption $8,400
To learn more about bonds, visit:
https://brainly.com/question/31756424
#SPJ11
Lomack Company's bonds have a 8-year maturity, a 12% coupon, paid semiannually, and a par value of $1,000. The market interest rate is 5%, with semiannual compounding. Part 1 What is the bond's value in $?
the bond's value is $1,231.15
The price of the bond is found by discounting the semiannual coupon payments and the final principal payment back to present value. We can find the semiannual coupon payment by multiplying the bond's coupon rate of 12% by its par value of $1,000 and dividing by 2 since it is paid semiannually. So, the semiannual coupon payment is $60.Part 1The bond's value in $We can use the following formula to find the bond's value:
V = (C / r) x (1 - 1 / (1 + r)^n) + F / (1 + r)^n
Where:V is the bond's valueC is the semiannual coupon paymentr is the semiannual discount raten is the total number of semiannual periodsF is the face value or par value of the bondn is the total number of semiannual periodsThe semiannual discount rate can be found by dividing the annual market interest rate by 2 since it is paid semiannually. So, the semiannual discount rate is
5% / 2 = 2.5%
is the total number of semiannual periods, which is 8 years x 2 semiannual periods per year = 16 semiannual periods.Using these values, we can calculate the bond's value:
V = ($60 / 0.025) x (1 - 1 / (1 + 0.025)^16) + $1,000 / (1 + 0.025)^16
V = $1,231.15
To know more about Company's visit;
brainly.com/question/30532251
#SPJ11
The Campbell Company is considering adding a robotic paint sprayer to its production line. The sprayer's base price is $870,000, and it would cost another $25,000 to install it. The machine falls into the MACRS 3-year class, and it would be sold after 3 years for $615,000. The MACRS rates for the first three years are 0.3333, 0.4445, and 0.1481. The machine would require an increase in net working capital (inventory) of $20,000. The sprayer would not change revenues, but it is expected to save the firm $358,000 per year in before-tax operating costs, mainly labor. Campbell's marginal tax rate is 25%. (Ignore the half-year convention for the straight-line method.) Cash outflows, if any, should be indicated by a minus sign. Do not round intermediate calculations. Round your answers to the nearest dollar.
What is the Year-0 net cash flow?
$
What are the net operating cash flows in Years 1, 2, and 3?
Year 1: $
Year 2: $
Year 3: $
What is the additional Year-3 cash flow (i.e, the after-tax salvage and the return of working capital)?
$
If the project's cost of capital is 14%, what is the NPV of the project?
$
Should the machine be purchased?
-Select-YesNoItem 7
Use two (2) coincidental indicators to explain the conditions that are experienced in a nation during a recession. (2 Marks)
During a recession, two coincidental indicators that can explain the conditions experienced in a nation are unemployment rate and industrial production. The unemployment rate serves as a key indicator of economic health during a recession. When the economy experiences a downturn, businesses tend to reduce their workforce, leading to higher unemployment rates as people struggle to find jobs. Additionally, industrial production, which measures the output of the manufacturing, mining, and utility sectors, provides insights into the overall economic activity. During a recession, industrial production tends to decline as businesses cut back on production due to reduced consumer demand and investment.
The unemployment rate is a crucial coincidental indicator during a recession as it directly reflects the impact of economic downturn on the labor market. As businesses face financial constraints, they often resort to layoffs or hiring freezes, leading to an increase in the number of people seeking employment and thus a rise in the unemployment rate. This indicator showcases the level of economic distress and financial hardship faced by individuals within the nation.
Industrial production is another essential coincidental indicator during a recession. It measures the total output of goods and services in the industrial sector, which includes manufacturing, mining, and utilities. During a recession, businesses tend to scale back production due to reduced consumer spending and investment. As a result, the industrial production index decreases, indicating a decline in economic activity and a contraction in the industrial sector. This decline reflects the overall slowdown in production and the struggling state of the nation's economy during a recession.
learn more about recession here:brainly.com/question/31926163
#SPJ11
fill in the blanks to complete the passage about the relationship between bond prices and bond interest rates.
The relationship between bond prices and bond interest rates can be summarized as follows: as bond interest rates increase, bond prices decrease, and vice versa.
The relationship between bond prices and bond interest rates is inverse or negative. When bond interest rates increase, the price of existing bonds decreases, and when bond interest rates decrease, the price of existing bonds increases. This inverse relationship can be explained by the concept of opportunity cost.
When bond interest rates rise, new bonds are issued with higher interest rates, making existing bonds less attractive to investors. To compensate for the lower interest rates offered by existing bonds, their prices must decrease to provide a higher yield compared to newly issued bonds. Conversely, when bond interest rates decrease, existing bonds become more attractive because they offer higher interest rates than newly issued bonds. This increased demand for existing bonds drives their prices up.
The inverse relationship between bond prices and bond interest rates is important for investors and bondholders as it affects the value of their bond investments. Fluctuations in interest rates can lead to changes in bond prices, impacting the overall return and value of bond holdings.
Learn more about bond from here:
https://brainly.com/question/29411464
#SPJ11
The following data was given for Cathy's Cakes: Sales $4,000 Operating Expenses $600.. Sales Returns & Allowances $200... Sales Discounts $400 Compute COGS: Beginning Inventory $1,500 Purchase $1,000 Ending Inventory $500
To compute the cost of goods sold (COGS) for Cathy's Cakes, we need to consider the beginning inventory, purchases, and ending inventory.
Beginning Inventory: $1,500
Purchase: $1,000
Ending Inventory: $500
To calculate COGS, we use the following formula:
COGS = Beginning Inventory + Purchases - Ending Inventory
COGS = $1,500 + $1,000 - $500
COGS = $2,000
Therefore, the cost of goods sold for Cathy's Cakes is $2,000. This represents the total cost of the inventory sold during the given period. It is important to note that sales returns and allowances, as well as sales discounts, are not considered in the COGS calculation as they are related to adjustments made to sales revenue rather than the cost of inventory.
To learn more about inventory click on the link below:
brainly.com/question/3353918
#SPJ11
Q4. How a HR Manager can define the
characteristics of Special Groups? If you are the HR Manager of
Bata Bangladesh then describe the key factors to design a Sales
Compensation Plan for your organizat
The HR manager can define the characteristics of special groups by identifying them, conducting needs assessments, establishing inclusive policies, and fostering an inclusive culture.
To design a Sales Compensation Plan for Bata Bangladesh, key factors include performance metrics, compensation structure, fairness and equity, communication, and integration with performance management.
To define the characteristics of special groups as an HR manager, it is important to consider various factors such as diversity, inclusion, and specific needs of these groups. Here are the key steps to defining the characteristics of special groups:
1. Identify the Special Groups: As an HR manager, start by identifying the special groups within the organization. This could include groups based on gender, ethnicity, age, disability, or any other protected characteristic. Understanding the different groups will help in designing targeted initiatives and strategies.
2. Conduct Needs Assessments: Once the special groups are identified, conduct needs assessments to understand their unique requirements and challenges. This can be done through surveys, focus groups, or individual discussions to gather feedback and insights directly from the members of these groups.
3. Establish Policies and Practices: Based on the needs assessments, develop and implement policies and practices that address the specific concerns and requirements of the special groups. This may involve creating inclusive hiring practices, providing reasonable accommodations, promoting diversity and inclusion in leadership positions, and offering development programs tailored to the needs of these groups.
4. Foster Inclusive Culture: Creating an inclusive culture is crucial for supporting special groups. This involves promoting diversity awareness and sensitivity among employees, providing training on unconscious bias, fostering an inclusive work environment, and establishing employee resource groups or affinity networks to support and empower members of special groups.
As the HR Manager of Bata Bangladesh, designing a Sales Compensation Plan involves considering several key factors:
1. Performance Metrics: Determine the performance metrics that will be used to evaluate sales performance. This could include individual sales targets, revenue generated, customer satisfaction, or other relevant indicators. Align the metrics with the organization's overall sales objectives.
2. Compensation Structure: Decide on the compensation structure that will motivate and reward sales employees. This may include a combination of base salary, commission, bonuses, incentives, or profit-sharing plans. Consider factors such as market benchmarks, industry standards, and the organization's financial capacity.
3. Fairness and Equity: Ensure the compensation plan is fair and equitable across the sales team. Consider factors such as job roles, responsibilities, experience levels, and performance levels. Avoid any potential biases or discrimination in the compensation structure.
4. Communication and Transparency: Clearly communicate the Sales Compensation Plan to the sales team, providing them with a comprehensive understanding of how their performance will be measured and how their compensation will be determined. Regularly communicate updates and changes to the plan, and ensure transparency in the process.
5. Performance Management: Integrate the Sales Compensation Plan with the organization's performance management system. Provide regular feedback, coaching, and performance evaluations to sales employees to align their efforts with the desired outcomes.
By considering these factors and customizing the Sales Compensation Plan to the specific needs of Bata Bangladesh, the HR Manager can ensure a fair, motivating, and effective compensation structure for the sales team.
To learn more about HR manager click here: brainly.com/question/31591642
#SPJ11
Participate in this week online Discussion Board:
1. What is the aggregate demand and the aggregate supply?
2. How do you define the shifts?
3. What is the simple aggregate expenditure model?
1. Aggregate demand refers to the total demand for goods and services in an economy at a given price level and period of time. It represents the total spending by households, businesses, government, and foreign entities on goods and services within an economy.
Aggregate supply, on the other hand, represents the total supply of goods and services that businesses are willing and able to produce and offer for sale at different price levels in the economy over a specific time period. It reflects the relationship between the price level and the quantity of output that firms are willing to produce.
2. Shifts in aggregate demand and aggregate supply refer to changes in the overall demand and supply conditions in an economy. These shifts can be caused by various factors:
- Changes in consumer spending: If consumers increase their spending, it leads to a shift in aggregate demand to the right. Conversely, if consumer spending decreases, it shifts aggregate demand to the left.
- Investment levels: Changes in business investment can also impact aggregate demand. Increased investment leads to a rightward shift, while decreased investment results in a leftward shift.
- Government policies: Government spending, taxation, and regulations can influence aggregate demand. Expansionary fiscal policies, such as increased government spending or tax cuts, can shift aggregate demand to the right. Contractions fiscal policies, such as reduced government spending or tax increases, shift aggregate demand to the left.
- Changes in exports and imports: The levels of exports and imports affect aggregate demand. An increase in exports or a decrease in imports leads to a rightward shift in aggregate demand, while a decrease in exports or an increase in imports shifts aggregate demand to the left.
- Changes in production costs: Shifts in aggregate supply can occur due to changes in production costs, such as wages, raw material prices, or energy costs. An increase in production costs leads to a leftward shift in aggregate supply, while a decrease in production costs shifts aggregate supply to the right.
3. The simple aggregate expenditure model, also known as the Keynesian cross model, is an economic model that explains the determination of equilibrium output or income in an economy. It is based on the relationship between aggregate expenditure (AE) and aggregate income (Y). The model assumes that aggregate expenditure is the sum of consumption expenditure (C) and investment expenditure (I).
According to the model, equilibrium occurs when aggregate expenditure equals aggregate income (AE = Y). If aggregate expenditure exceeds aggregate income, it creates a positive output gap, leading to an increase in production and income. Conversely, if aggregate expenditure falls short of aggregate income, it results in a negative output gap, leading to a decrease in production and income.
The simple aggregate expenditure model provides insights into how changes in autonomous consumption (consumption not influenced by income), investment, government spending, and net exports can affect equilibrium output in an economy. It helps analyze the impact of fiscal policy, changes in consumption patterns, and other factors on the overall level of economic activity.
Learn more about aggregate expenditure model here:
https://brainly.com/question/32667497
#SPJ11
Shown below is an extract from the comparative statements of
financial position and statement of profit or loss of Crystal Ltd
for the year ended 30 June 2021:
Crystal Ltd
Balance Sheet
as
Given below is an extract from the comparative statements of financial position and statement of profit or loss of Crystal Ltd for the year ended 30 June 2021:
Crystal LtdBalance Sheetas at 30 June 2021
Non-Current AssetsProperty, plant and equipment $250,000$290,000
Current AssetsInventory $80,000 $70,000
Receivables $65,000 $80,000
Cash at bank $10,000 $12,000$155,000$162,000
Total Assets $405,000 $452,000
Shareholders’ EquityShare capital $150,000 $150,000
Retained earnings $70,000 $95,000$220,000$245,000
Non-Current LiabilitiesBank loan $50,000 $70,000
Current LiabilitiesTrade and other payables $135,000 $137,000
Total Equity and Liabilities $405,000 $452,000To begin with, Crystal Ltd's Balance Sheet provides financial information about the company's assets, liabilities, and equity as of the end of the year.
Balance sheet items are classified as current and non-current items to help investors comprehend the nature of the company's financial obligations, such as how much they are required to pay in the short term and how much is due over the long term. The balance sheet provides the information that aids in the calculation of financial ratios such as working capital, debt-to-equity ratio, current ratio, and others.
All of these ratios aid in determining the company's overall financial health and its capacity to pay its obligations.The given extract does not provide enough information for the Statement of Profit or Loss, which is also known as an Income Statement. An income statement provides information on the company's revenues and expenses, gross profit, operating profit, and net profit over a specific period.
To know more about Liabilities , visit
https://brainly.com/question/30805836
#SPJ11
opinion about thus:
Hey Class!
1.) The company I am choosing is Nike, which is a part of the fashion/retail industry.
2.) One management style that Nike uses is operations management style. Operations management primarily focuses on helping the company produce products more efficiently. As can be seen on the Nike website, the company has a sustainable business innovation where they say they are, "protecting the future of sport" and have set goals listed on their website for 2025. Nike's management style does a great job at portraying the company's overall value of producing their products in a matter that is not only more efficient to cost, but also helps the environment in necessary times.
3.) According to IBISWorld, Nike is the second largest sneaker retailer with a market size of $17bn. Nike's largest competitor is FootLocker. I believe this is due to FootLocker's large amount of different companies being sold within the store, as well as the price difference for items. If Nike can find a way to make their sustainable fashion pieces a more affordable option within their stores, I am certain they can achieve more profit while still succeeding at their company vision. A lot of people do not even know that Nike sells products made from reusable material. If the company can better market these products, they would get more attention and sales being that sustainability is in high demand in society today.
the individual expresses their opinion about Nike and suggests potential areas for improvement.
They highlight Nike's management style, specifically operations management, which focuses on efficient production and sustainability. The opinion suggests that Nike's approach aligns with their values of cost-efficiency and environmental responsibility.
The individual also mentions that according to IBISWorld, Nike is the second largest sneaker retailer with FootLocker being its main competitor. They propose that FootLocker's success could be attributed to the variety of brands they offer and price differences. The opinion suggests that if Nike can make their sustainable fashion pieces more affordable and effectively market them, they could increase profits while staying true to their company vision. They believe that many people are unaware of Nike's sustainable products and that increased marketing efforts could capture the attention of consumer who are seeking sustainable s.
It's important to note that this opinion reflects the perspective of the individual expressing it and may not represent a comprehensive analysis of Nike's operations or the factors influencing its market position. Additional research and data would be necessary to validate these claims and evaluate their feasibility.
Learn more about consumer here:
https://brainly.com/question/30132393
#SPJ11
D Question 6 1 pts What is the Herfindahl-Hirschman Index for an economic sector where four firms each have a market share of 20% and 2 firms each have a market share of 10%?
The Herfindahl-Hirschman Index (HHI) for an economic sector with four firms each having a market share of 20% and two firms each having a market share of 10% is 2200.
To calculate the HHI, we square the market shares of each firm and sum them up. In this case, the calculation would be as follows:
(0.2^2 + 0.2^2 + 0.2^2 + 0.2^2) + (0.1^2 + 0.1^2) = 0.04 + 0.04 + 0.04 + 0.04 + 0.01 + 0.01 = 0.14
Multiplying by 10,000 to express it as an index, we get 1400. Therefore, the Herfindahl-Hirschman Index for this economic sector is 1400.
The HHI is used to measure market concentration, with higher values indicating greater concentration. In this case, the HHI of 1400 suggests a moderately concentrated market in which a few firms hold significant market shares.
Learn more about market concentration here:
https://brainly.com/question/32303924
#SPJ11
Meg and James Rashev were both employed full-time during the year. The Rashevs have four children: Joanne (age 17), Susie (age 14), and Sarah and Kelly (4-year-old twins). The Rashevs employed a nanny to look after their children and paid her $15,000 for the year. In addition, during July, Susie went to overnight camp for two weeks at a cost of $250 per week. The Rashevs' family income is summarized below: Meg Salary & taxable benefits Employment expenses [sec. 8] Business income: $46,000 P (2,800) Show all your work. For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). BIUS Paragraph Arial James Revenue Expenses Interest income 800 What is the maximum child care deduction that can be claimed by the Rashevs in the year and who can claim it? $50,000 (32,000) 1,500
The maximum child care deduction that can be claimed by the Rashevs in the year is $4,000.
The maximum child care deduction that can be claimed by the Rashevs in the year and who can claim it is $4,000. The Rashevs' total income before deducting child care expenses is $46,000. The Rashevs have to consider the maximum childcare deduction they can claim before filing the taxes for the year. In the given case, the Rashevs have paid $15,000 to a nanny to look after their children. It is important to note that only a child's custodial parent or guardian can claim the childcare expenses for the child. Here, since the Rashevs are married and live together with their children, they both are the custodial parent of the children.
Therefore, they both can claim the childcare expenses. In addition to this, only the childcare expenses that are incurred to allow the custodial parent to work can be claimed for the deduction. If the Rashevs have any other sources of income other than their regular employment, then the income from that source will not be eligible for the deduction. Also, the expenses should be paid for the care of the children under the age of 16, or a dependent that is disabled, who has lived with the taxpayer for more than half of the year.
The maximum amount of childcare expenses that can be deducted is the smallest of either the total amount of expenses incurred, the amount of the earned income of the custodial parent with the lower income, or $3,000 for one child and $6,000 for two or more children. Here, the Rashevs have four children, which means they are eligible for the maximum deduction of $6,000. They have paid $15,000 for the nanny, but only $6,000 can be claimed for the deduction.
To know more about expenses visit:
brainly.com/question/29850561
#SPJ11
Joe Ramsey is a computer programmer at Biosphere Communications. He approaches you, the payroll accountant about his garnishment for child support, claiming that he wishes to remit it personally because he needs to increase his net pay. What advice should you offer him?
As the payroll accountant, it is important to provide Joe Ramsey with accurate and appropriate advice regarding his garnishment for child support. Here's what you should advise him:
Legal Obligation: Explain to Joe that child support are court-ordered and are legally binding. It is his legal obligation to comply with the garnishment and ensure that the required amount is withheld from his paycheck. Payroll Responsibility: Inform Joe that as the payroll accountant, it is your responsibility to accurately calculate and withhold the garnishment amount from his paycheck. It is not within your authority to allow him to remit the payment personally in order to increase his net pay.
Learn more about accountant here;
https://brainly.com/question/30977839
#SPJ11
With respect to the evolution of sustainable
development, where does your chosen country now fit?
The chosen country, Barbados, is actively promoting sustainable development through various initiatives, policies, and investments.
Barbados has made significant progress in embracing sustainable development. The country recognizes the importance of balancing economic growth with environmental conservation and social equity.
It has implemented policies and initiatives to promote renewable energy, energy efficiency, waste management, and sustainable tourism practices. Barbados has also established targets and frameworks to address climate change, biodiversity conservation, and sustainable land use.
The government, in collaboration with international organizations and local stakeholders, continues to invest in sustainable infrastructure, education, and awareness programs. Barbados actively participates in global sustainability discussions and initiatives.
Overall, the country's commitment to sustainable development is evident in its efforts to create a more resilient, inclusive, and environmentally friendly future for its citizens and visitors.
Learn more about Sustainability click here :brainly.com/question/29898174
#SPJ11
Asymmetric information can lead to two broad classes of economic problems, adverse selection and moral hazard. DeÖne both concepts and explain any di§erences. (6, 300 word limit) Consider a used car market where all buyers and sellers are risk neutral. Buyers value lemons at $15,000 and good used cars at $25,000. The reservation price of lemon owners is $12,000 and for the owners of good used cars the reservation price is $22,000. Assume that the share of used cars that are lemons is and that no buyers can distinguish lemons from good used cars. (b) How much are buyers willing to pay for used cars in this market? (Hint: this will be a function of ) (2) (c) For what values of do all potential sellers actually sell their cars?
Asymmetric information can lead to two broad classes of economic problems, adverse selection and moral hazard.
Below is an explanation of both the concepts: Adverse Selection: Adverse selection takes place when there is an absence of relevant information or an imbalance of information between two parties in a transaction. This lack of information contributes to one party making a poor or undesirable decision. For instance, while purchasing insurance, individuals with the highest risk are the ones who will choose to buy it, knowing that they have a higher likelihood of needing it.
Consequently, insurance firms will have to increase their rates to accommodate these individuals, making insurance too expensive for those who are healthier. Moral Hazard: Moral hazard occurs when one party in a transaction changes their behavior in response to the presence of information asymmetry. Asymmetric information in the form of insurance coverage, for instance, can encourage risk-taking behavior.
Know more about economic problems:
https://brainly.com/question/32762977
#SPJ11
Engr. Johnson puts P50,000 into a 16 % today. He plans to deposit another P 80,000 at the end of the third year and to make a P 100,000 purchase in the next five years. how much money was still in the account two years after the purchase
To calculate the remaining amount in the account two years after the purchase, we need to consider the interest earned and the subsequent deposits.
Given:
Initial deposit: P50,000
Interest rate: 16%
Second deposit: P80,000
Purchase amount: P100,000
First, let's calculate the interest earned on the initial deposit after two years:
Interest earned = Initial deposit * Interest rate
Interest earned = P50,000 * 0.16 = P8,000
After two years, the initial deposit would have grown to P58,000 (P50,000 + P8,000 in interest).
Next, let's consider the second deposit of P80,000 made at the end of the third year. This deposit will not earn any interest for the two-year period we're interested in.
Therefore, the total amount in the account two years after the purchase would be:
Total amount = P58,000 (initial deposit) + P80,000 (second deposit) - P100,000 (purchase amount)
Total amount = P38,000
So, there would be P38,000 remaining in the account two years after the purchase.
To know more about remaining amount click this link -
brainly.com/question/30712421
#SPJ11
1) Brianna receives $6,000 at the end of every half-year for 18
years and 6 months for money that she loaned to a friend at 3.86%
compounded semi-annually.
a. What type of annuity is this?
Ordinary si
At the end of the 18 years and 6 months, Brianna will be compensated a total of $218,784.80 for the money she lent to her buddy.
In this case, the type of annuity is a standard annuity. At the conclusion of each period, an ordinary annuity consists of a sequence of equal cash flows or payments. For a total of 18 years and 6 months, Brianna will get $6,000 at the conclusion of each half-year.
The timing of the cash flows is what is meant by the term "ordinary" in an ordinary annuity. The traditional method for managing annuity calculations is to make the payments or receipts at the conclusion of each month.
The interest rate in this case is specified as 3.86% compounded semi-annually. As a result, interest is calculated twice year, and the compounding period coincides with the annuity's frequency of payments. The increase of the investment over time is made possible by the compounding of interest.
We can apply the calculation for the future value of an ordinary annuity to get the future value or the total sum Brianna will receive at the conclusion of the annuity period:
FV = P * [(1 + r)^n - 1] / r
Where:
FV = Future value of the annuity
P = Payment or cash flow per period
r = Interest rate per period
n = Number of periods
In this instance, the payment is $6,000 every period, the interest rate is 3.86% per period, or 0.0386, and the total number of periods is 18 years and 6 months, or 37 half-year intervals.
We may determine the annuity's future value using the following formula:
FV = $6,000 * [(1 + 0.0386)^37 - 1] / 0.0386
After conducting the calculations, we determine that the annuity's future value is roughly $218,784.80.
As a result, Brianna will receive $218,784.80 in total for the money she lent to her buddy after 18 years and 6 months.
for more such question on money visit
https://brainly.com/question/29498634
#SPJ8
For each of the following accounting practices, state the most appropriate accounting concept or principle underlying the practice: 1. After a payment has been disbursed to a supplier, the accounts payable clerk is required to file documents relevant to the payment made. This ensures that transactions recorded are supported by proper source documents. 2. Kelsey Co. writes down its stocks of finished goods to estimated selling price when the selling price of the goods fall below cost. 3. Playstore Co. sells a plant to plant to Toystore Co. and immediately leases it back for the remaining life of the asset. Playstore Co. still records the asset in its accounts. 4. At Waldo Co. office equipment that have a life more than one year but which cost less than $1,000 is written off as expense on the date of its initial recognition. However, all other office equipment is capitalized and depreciated over their economic lives.
The most appropriate accounting concept underlying the practice of filing documents relevant to payments made is the concept of "Proper Documentation and Record-Keeping."
This concept emphasizes the importance of maintaining accurate and complete records to support transactions and provide evidence of the company's financial activities.
The most appropriate accounting principle underlying the practice of writing down stocks of finished goods to estimated selling price when the selling price falls below cost is the principle of "Conservatism" or "Lower of Cost or Market." This principle suggests that assets should be reported at the lower of their cost or market value to ensure that financial statements do not overstate the value of assets.
The most appropriate accounting concept underlying the practice of recording the sale and leaseback of a plant while still keeping it on the books is the concept of "Substance Over Form" or "Economic Substance." This concept focuses on reporting transactions based on their economic reality rather than their legal form. In this case, the substance is that Playstore Co. still effectively retains the use of the asset through the leaseback arrangement, even though legal ownership has been transferred.
Learn more about capitalized Here-
https://brainly.com/question/1293334
#SPJ4
