Based on its location on the periodic table, which element would be most likely to form a negative ion? A. Bromine (Br) B. Strontium (Sr) C. Potassium (K) D. Magnesium (Mg)

Answer:

kinetic and potential

Answer:

5 W

Explanation:

The formula of the power is:

● P = W/t

W is the work and t is the time needed to do it(in seconds)

Let's calculate first the work that the force exerced:

W = Vector F . Vector d

D is the distance ( here 400 cm wich is 4 m)

Make a representation to see how are the vectors F and V.(picture below)

The vector F and d are colinear since Den is pushing the desk on the ground.

● W = 4 × 10 = 40 J

J is Joule

■■■■■■■■■■■■■■■■■■■■■■■■■■

● P = W / t

● P = 40/ 8

● P = 5 W

The power output of the force of 10N for 8 seconds to move the desk is 5 watts. Thus, the correct option is B.

Power is the amount of energy which is transferred or converted per unit time. In the SI system of Units, the unit of power is the watt, which is equal to one joule per second time.

We Know, P = W/t

where, P = Power,

W = Work done,

t = Time taken

P = F × s/t

where, F = Force applied,

s = distance travelled,

t = time taken

Here, F = 10N

s = 400cm = 4m

t = 8 sec

Substitute their values into the expression,

P = 10 × 4/8

P = 10 × 1/2

P = 5 Watt

So, the power output will be 5 watts.

Therefore, the correct option is B.

Learn more about Power here:

https://brainly.com/question/287674

#SPJ6

Observation: The chimpanzee climbed the tall tree.

Inference: The chimpanzee must be very strong,

Explanation:

An inference differs from an observation because an inference is a guess or possible explanation about a phenomenon. On the other hand, an observation is a statement based on evidence gathered through the senses. In this context, the sentence that is an observation is "The chimpanzee climbed the tall tree" because this statement is based on visual evidence. Moreover, the inference is "The chimpanzee must be very strong" because this is just a guess to explain how the chimpanzee climbed up the tree.

It isn't best to wear loose fitting clothing when exercising, as you may not feel too comfortable. It depends on the person. However there are a few advantages.

• Tight clothing may not be comfortable as well

• Looser clothing allows easy evaporation of sweat

Then again when it says " loose - fitting " it may mean not too baggy. Baggy clothing can have an impact on your physical activity.

Answer All of the above

For people on a p e x

Explanation:

It is given that,

The distance covered by a body along the x-axis is given by :

[tex]x=2t^3+5t^2+t[/tex]

t is in seconds and x is meters

Speed of the body is given by :

[tex]v=\dfrac{dx}{dt}\\\\v=\dfrac{d(2t^3+5t^2+t)}{dt}\\\\v=6t^2+10t+1[/tex]

At t = 0,

[tex]v=6(0)^2+10(0)+1=1\ m/s[/tex]

At t = 2 s,

[tex]v=6(2)^2+10(2)+1=45\ m/s[/tex]

So, the average speed in a time interval from t= 0s and t=2s is 45 m/s.

Answ

In real world application Ultraviolet is not a color as it it can’t be seen by the human eye. It is a high frequency part of the Suns electromagnetic radiation. Even though UltraViolet sounds like a color, the Ultra in this case signifies that it is beyond Violet and thus beyond the visible part of the electromagnetic spectrum. They are not depicted with a color on spectrum charts, since we can’t see it we can’t truly classify it as a color no more than can we equate the other parts of the spectrum like XRays, Gamma Rays and Radio Waves with colors. These and other non-visible parts of the spectrum are measured instead with wavelengths. So the answer is no they would not be monochromatic, or any color at all.

Red, Orange, Yellow, Green, Blue, Indigo and Violet are the visible colors of the electromagnetic spectrum. They, combined together are called white light and our atmosphere acts like a prism to divide them into separate and apparently distinct colors. Outside the visible Red you have Infrared which is invisible to the human eye and is the heat we feel from the sun. Outside the Violet end of the visible spectrum is where UVA, UVB and UVC are found, and these are the eye and skin damaging rays. UV rays are also invisible to the human eye (but visible to certain birds of prey such as raptors

Explanation:

Answer:

[tex] \boxed{ \bold{ \boxed{ \sf{39.2 \: m/ {s} \: }}}}[/tex]

Explanation:

Given,

Distance travelled ( d ) = 176.4 meters

Time taken ( t ) = 4.5 seconds

Finding the speed of a cheetah

Speed [tex] \sf{ = \frac{distance \: travelled}{time \: taken} }[/tex]

[tex] \sf{ = \frac{176.4}{4.5} }[/tex]

[tex] \sf{ = 39.2 \: m/ {s} \: }[/tex]

------------------------------------------------------------------------

Let's learn about Speed :

Suppose a body moves 20 m in 2 seconds, either on a curved path or on a straight path. So , 10 m is the distance travelled by the body in each second which can be written as 10 m/s. This is called speed of the body. Thus, Speed is defined as the distance travelled per unit time. It is the rate of distance travelled by a body.

Mathematically,

[tex] \boxed{ \bold{ \sf{speed = \frac{distance \: travelled}{time \: taken} }}}[/tex]

In SI system, the unit of distance is metre and time is second. Thus , the SI unit is speed is m/s.

Hope I helped!

Best regards!!

Answer:

5.3333 sec

Explanation:

initial speed: u = 108km/hr or 30 m/s

final speed: v = 0m/s

distance travelled: s = 80m

time the car took to stop: = t sec

[tex]v^{2} - u^{2}[/tex] = 2as,

a = ([tex]v^{2} - u^{2}[/tex])/2s

a = (0-900)/160

a = -5.625 [tex]ms^{-2}[/tex]

v = u + at,

t = (v - u)/a

t= (0 - 30)/(-5.625)

t = 5.3333 sec

Answer:

The time she takes to reach the water from when she jumps off the platform is 1.71 s

Explanation:

According to the equations of motion, we have;

v = u - g·t

v² = u² - 2·g·s

s₁ = u₁·t₁ + 1/2·g₁·t₁²

The given parameters are;

The height of the platform (assumption: above the water) = 10 m

The velocity with which she jumps, u = 3 m/s

The acceleration due to gravity, g = 9.81 m/s²

The height to which she jumps, s, is found as follows;

v² = u² - 2·g·s

At maximum height, v = 0, which gives;

0 = 3² - 2×9.81×s

2×9.81×s = 3² = 9

s = 9/(2×9.81) = 0.4587 m

s = 0.4587 m

The time to maximum height, t, is found as follows;

v = u - g·t

0 = 3 - 9.81×t

9.81×t = 3

t = 3/9.81 = 0.3058 s

The total distance, s₁ from maximum height to the water surface = s + 10 = 0.4587 + 10 = 10.4587 m = 10.46 m

The time to reach the water from maximum height, t₁, is found as follows;

s₁ = u₁·t₁ + 1/2·g₁·t₁²

Where;

s₁ =  The total distance from maximum height to the water surface = 10.46 m

u₁ = The initial velocity, this time from the maximum height = 0 m/s

g₁ = The acceleration due to gravity, g (positive this time as the diver is accelerating down) = 9.81 m/s²

t₁ = The time to reach the water from maximum height

Substituting the values gives;

s₁ = u₁·t₁ + 1/2·g₁·t₁²

10.46 = 0·t₁ + 1/2·9.81·t₁²

t₁²= 10.46/(1/2×9.81) = 2.13 s²

t₁ = √2.13  = 1.46 s

Total time = t₁ + t = 1.46 + 0.3058 = 1.7066 ≈ 1.71 s.

Therefore, the time she takes to reach the water from when she jumps off the platform = 1.71 s.

Answer:

1) The density of the object = 2500 kg/m³

2) The density of the oil = 1250 kg/m³

Explanation:

1) The information relating to the question are;

The mass of the object in air = 0.250 kgf

The mass of the object in water = 0.150 kgf

The mass of the object in the oil  = 0.125 kgf

By Archimedes's principle, we have;

The upthrust on the object in water = Mass in air - mass in water = The weight of the water displaced

The upthrust on the object in water = 0.250 - 0.150 = 0.1 kgf

∴ The weight of the water displaced = 0.1 kgf

Given that the object is completely immersed in the water, we have;

The volume of the water displaced = The volume of the object

The volume of 0.1 kg of water water displaced = Mass of the water/(Density of water)

The volume of 0.1 kg of water = 0.1/1000 = 0.0001 m³

The density of the object = (Mass in air)/ volume = 0.250/0.0001 = 2500 kg/m³

The density of the object = 2500 kg/m³

2) Whereby the mass of the object in the oil = 0.125 kgf

The upthrust of the oil = The weight of the oil displaced

The upthrust of the oil on the object = Mass of the object in air - mass of the object in the oil

The upthrust of the oil on the object = 0.250 - 0.125 = 0.125 kgf

The weight of the oil displaced = The upthrust of the oil

Given that the volume of the oil displaced = The volume of the oil, we have;

The volume of the oil displaced = 0.0001 m³

The mass of the 0.0001 m³ = 0.125 kg

Therefore the density of the oil = 0.125/0.0001 = 1250 kg/m³.

The density of the oil = 1250 kg/m³.

Answer:

h = 35857 km

Explanation:

A geosynchronous orbit can be defined as circular orbit which lies on the Earth's equatorial plane and follows the direction of the Earth's rotation in a period that's equal to the Earth's rotational period and thereby appearing motionless, at a fixed position in the sky relative to the ground observers.

We are given;

Radius of earth(R) = 6.37 x 10^(6) m

Mass of earth (Me) = 5.97 x 10^(24) kg

Gravitational constant = 6.67 × 10^(-11) m³/kg.s²

The earth has a rotational period of 24 hours per day. This gives in seconds

T = 24 × 60 × 60

T = 86400 s

Let's make the height of the orbit from Earth's surface to be h

Also, let ω be the uniform angular velocity in rad/s with which the satellite rotates in the geosynchronous orbit

Now, equating the centripetal force with the gravitational force gives us;

mω²(R + h) = G•Me•m/(R + h)²

m will cancel out. Also ω can be written as 2π/T

Thus,we now have;

(R + h) = ∛(G•Me•T²/(4π²))

Plugging in the relevant values, we have;

(R + h) = ∛(6.67 × 10^(-11) × 5.97 x 10^(24) × 86400²/(4π²))

(R + h) = 42227 Km

Since R = 6.37 x 10^(6)m = 6370 km

Thus;. h = 42227 - 6370 = 35857 km

Answer:

The maximum induced emf is 15.08 V

Explanation:

Given;

number of turns of the generator, N = 6 turns

area of the loop, A = 0.04 m

magnetic field of the loop, B = 0.2 T

frequency of loop, f = 50 Hz

The  maximum induced emf is given by;

E = NBAω

Where;

ω is the angular speed = 2πf

E = NBA(2πf)

E = 6 x 0.2 x 0.04 x (2 x 3.142 x 50)

E = 15.08 V

Therefore, the maximum induced emf is 15.08 V

Answer:

C. 1.50×10¹¹ m

Explanation:

First, convert the time to seconds.

8 min × (60 s/min) + 20 s = 500 s

Distance = speed × time

d = (3×10⁸ m/s) (500 s)

d = 1.50×10¹¹ m

The distance from the Sun to the Earth is 1.50 × 10¹¹. Speed is the distance travelled by an object in a particular time period. Thus, the correct option is C.

The speed of light in vacuum is commonly denoted by c. It is a universal physical constant. The speed of light (c) is exactly equal to 3.00 x 10⁸m/s (meter per second).

The speed of an object is the rate of change of position with respect to time. It is also defined as the distance covered by an object with respect to time. It can be calculated by dividing the distance travelled by an object by the time taken. It is a scalar quantity as it has only magnitude and no direction.

Speed = Distance / time

Distance = Speed × Time

Distance = 3.00 × 10⁸ × 500

Distance = 1500 × 10⁸

Distance =  1.50 × 10¹¹

Therefore, the correct option is C.

Learn more about Speed of light here:

https://brainly.com/question/394103

#SPJ2

Answer:

The final temperature is 31.94°

Explanation:

The mass of the water in the container m₁ = 200 g = 0.2 kg

The initial temperature of the water,  T₁₁ = 30°C

The mass of the iron, m₂ = 200 g = 0.2 kg

The temperature of the iron T₂₁= 50°C is immersed in the water,

The specific heat capacity of the water, c₁ = 4200 J/(kg·°C)

The specific heat capacity of the iron, c₂ = 450 J/(kg·°C)

Heat capacity relation is given by the formula;

Heat capacity Q = Mass, m × Specific heat capacity, c × Temperature change, (T₂ - T₁)

Given that energy can neither be created nor destroyed, and with the assumption that all the heat lost by the nail is gained by the water we have;

Heat lost by iron nail = Heat gained by the  water

m₁ × c₁ × (T₂ - T₁₁) = m₂ × c₂ × (T₂₁ - T₂)

Where, T₂ is the final temperature

0.2 kg × 4200 J/(kg·°C) × (T₂ - 30) = 0.2 kg × 450 J/(kg·°C) × (50° - T₂)

840·T₂ - 25200 = 4500 - 90·T₂

4500 + 25200 = 840·T₂ + 90·T₂

29700 = 930·T₂

T₂ = 29700/930 = 31.94°.

The final temperature = 31.94°.

Answer:

The first answer is W and Z, since they appear to be a period apart. Dont know the second question. I did what I could, hope someone can answer the second.

Answer:

Archaeology

Explanation:

Radioisotopes are radioactive atoms of an element in which their atoms contain excess energy making them unstable. When broken down they become more stable releasing radiations.

Carbon 14 is a radioactive isotope that is used in archaeology to study and estimate the lifespan and age of organic materials such as wood, leather. Carbon 14 can be used to estimate the ages of materials up to 50000 to 60000 years.

Answer:

archaeology

Explanation:

Answer: √(L/g)

Explanation:

Here we only work with the units:

The unit of the period is units of time, so we have:

[T] = [s]

Now, the units of the length of the pendulum are units of distance:

[L] = [m]

And the units of the acceleration are:

[g] = [m/s^2]

Now, we want to work with those two in such way that the end result is only in seconds.

First, we can see that in g we have seconds square, so we know that we should use a square root.

Then we can divide L by g in order to remove the distance unit, and to have the time unit in the numerator

[L/g] = [m*s^2/m] = [s^2]

Now we apply the square root:

[√(L/g)] = [√s^2] = [s]

Then the combination is: √(L/g)

T = k*√(L/g)

where k is the constant of proportionality.

Answer:

  357.5 miles

Explanation:

  distance = speed × time

  distance = (55 mi/h) × 6.5 h = 357.5 mi

The train will travel 357.5 miles in 6.5 hours.

Answer:

In the data table, we can see the frequency distribution in the diet of a given type of chimpanzee.

Why a researcher further classify the data separating information of males and females?

Well, the objective of the researcher is to find information about these chimpanzees, so if he notices that the diet varies (even slightly) between males and females, separating the information between males and females would be useful to know how the diet varies, and why this happens.

This is the primary motive of why a researcher would want to separate the information of males and females.

Common symbol of the volume (L)

Answer:

the answer is c.L

Explanation:

Answer:

Explanation:

Given mg = 4N .

m = 4 / g

At the bottom of the swing let centripetal acceleration be a

T - mg = ma

9 - 4 = ma

5 = 4 a  / g

a =  5g / 4

Answer:

The dust present in the clouds.

Explanation:

The complicated composition molecules that can be found in space are generally associated with clouds of dust. The significant amount of dust in these clouds provides protection not only for these molecules, but for any body that makes up or is associated with dust clouds.

It is exactly this dust that protects the molecules against the action of ultraviolet rays.

Answer:

Electroplating involves deposition of a thin layer of metal onto the surface of a substance(compound) through electric current. This helps preserve the substance(compound) from rust and oxidative damage.

As an entrepreneur which has been provided a loan by a bank to set up a small electro plating unit. I would venture into electroplating electronic/electric appliances parts.This is because these types of appliances are in vogue now and used my millions of people for their day to day activities. This means that more people will come for various degrees of production and repairs which would include electroplating . This translates to more customers and more money for the repayment of the loan.

Answer:

Upthrust = 20 N

Explanation:

The question says that "A body weighs 100N in air and 80N when submerged in water. Calculate the upthrust acting on the body ?"

Upthrust is defined as the force when a body is submerged in liquid, then liquid applies a force on it.

ATQ,

Weight of body in air is 100 N

Weight of body in water is 80 N

Upthrust is equal to the weight of body in air minus weight of body in water.

Upthrust = 100 N - 80 N

Upthrust = 20 N

So, 20 N of upthrust is acting on the body.

Answer:

Reproducible by other scientists

Explanation:

I just took the test

Explanation:

We know that,

[tex]v = rw[/tex]

Where, v = tangential velocity (m/sec)

r = radius = 17.67 m

w = angular velocity = 0.83 revs/ sec

v = 14.66 m/sec

Distance in one minute = 879.6 m

= 2885.82 feet

Explanation:

a) Acceleration is the slope of the velocity vs time graph.  When velocity vs time is a straight line, that means the acceleration is a constant.  F = ma, so the resultant force is also constant.

b) As air resistance increases, the acceleration begins to decrease.

c) A falling object stops accelerating when it reaches terminal velocity.

d) F = ma, so when the acceleration is 0, the resultant force is also 0.

Answer:

3.24×10⁸ J, or 324 MJ

Explanation:

"kWh" is a kilowatt-hour.  It's the energy used by 1 kilowatt of power after one hour.

A kilowatt is a kilojoule per second.

90 kWh

= 90 kW × 1 hr

= 90 kJ/s × 1 hr

= 90 kJ/s × 3600 s

= 324,000 kJ

= 324,000,000 J

The energy is 3.24×10⁸ J, or 324 megajoules.

Oil is optically denser than water. When sound/light goes from optically denser medium to optically rarer medium, their velocity increase and they moves away for normal.

The sound wave speeds up and bends

[tex] \Large{ \underline{ \boxed{ \pink{ \bf{Option \: (D)}}}}}[/tex]

As, In optics we learnt that light undergoes refraction when travels from medium of different densities. Similarly, Sound also follows the law of refraction.

━━━━━━━━━━━━━━━━━━━━

Answer:

the sound wave slows down and bends

Explanation:

a p e x