The correct answer is C.) A+B -> C. This is because Model2 shows that one mole of A and one mole of B combine to form one mole of C.
Since there is a 1:1 ratio of A and B, and the result is one mole of C, this would indicate a reaction of A+B -> C. Chemical processes occur when atoms form or break chemical bonds. The molecules that start a chemical reaction are known as reactants, and the compounds that are produced as a result of the reaction are known as products. However, the measurement that occurs most frequently is probably the concentration of the reactants and products. A large variety of distinct observable characteristics, such as color change, energy change (temperature change or light produced), gas production, precipitate formation, and property change, can be used to detect chemical reactions.
To learn more about mole click here https://brainly.com/question/26416088
#SPJ4
A 125L Water (Cm = 4.18 J/gC) in tank was at temperature 75C and dropped to 22.5 C, the amount of heat (KJ) transferred to surroundings isSelect one:a. 2.75X10^4b. -27.5X10^4c. -2.75X10^4d. 27.5X10^4e. -275X10^4
If 125L of the Water (Cm = 4.18 J/g °C) in tank was at the temperature of 75 °C and then dropped to 22.5 °C, The amount of heat (KJ) transferred to surroundings is the correct option is c) -2.74 × 10⁴ kJ.
The mass of the water = 125 L = 125000 g
The specific heat = 4.18 J/g °C
The change in the temperature = 22.5 - 75 = - 52.5 °C
The heat expression is given as :
q = mc ΔT
q = 125000 × 4.18 × - 52.5
q = - 27431250 J
q = - 27431.25 kJ = -2.74 × 10⁴ kJ
Thus, the heat required is -2.74 × 10⁴ kJ.
To learn more about heat here
https://brainly.com/question/28857839
#SPJ4
what volume, in ml, of 0.600 m hcl is required to react completely with 2.50 g of sodium hydrogen carbonate?
The amount of HCl is required to react completely with 2.50g of sodium hydrogen carbonate is 50 mL.
The balanced chemical equation is given as,
NaHCO₃ + HCl → NaCl + CO₂ + H₂O
Number of moles of NaHCO₃
MM = m / n
n = m / MM
Molar mass NaHCO₃ = 84.0 g/mol, mass = 2.50 g
Substituting the values,
n = 2.50 / 84
n = 0.03 mol
The volume of HCl is calculated as,
C = n / V
⇒ V = n / C
Substituting the values,
C = 0.600 M
V = 0.03 mol / 0.600 M
⇒ V = 50 mL
Learn more about volume from the link given below.
https://brainly.com/question/30066429
#SPJ4
How many ¹H NMR signals does 2-chloro-3-methyl-2-butene exhibit? Assume both allylic methyl show as chemically equivalent in the NMR. 1 2 3 4 5
There will be 3 H NMR signals for 2-chloro-3-methyl-2-butene.
The variety of protons present in a molecule is represented by the number of NMR signals. The illustration we used to explain NMR spectroscopy is as follows: Five signals on the spectrum signify five different types of protons. can be calculated simply by counting the number of unique hydrogens on one side of the symmetry plane. Nuclear magnetic resonance is used in proton nuclear magnetic resonance (1H NMR, proton NMR, or hydrogen-1 NMR), which uses hydrogen-1 nuclei within a substance's molecules to determine the structure of those molecules. Using NMR technique one can analyze the molecular structure of a molecule by observing the nuclear spins in electric field.
To learn more about NMR click here:
https://brainly.com/question/17564948
#SPJ4
There are many compounds composed of nitrogen and oxygen compare the formulas for nitrogen monoxide and nitrogen dioxide
The chemical formula for nitrogen monoxide (NO) is one nitrogen atom (N) and one oxygen atom (O) bonded together. The chemical formula for nitrogen dioxide (NO2) is one nitrogen atom (N) and two oxygen atoms (O2) bonded together.
In summary, the difference between the two formulas is the number of oxygen atoms present. Nitrogen monoxide has one oxygen atom and Nitrogen dioxide has two oxygen atoms.
The chemical formulas for nitrogen monoxide and nitrogen dioxide are:
Nitrogen monoxide: NONitrogen dioxide: [tex]NO_2[/tex]As we can see, the main difference between these two compounds is the number of oxygen atoms. Nitrogen monoxide has only one oxygen atom, while nitrogen dioxide has two. The subscript "2" in NO2 indicates that there are two oxygen atoms in the molecule.
What is Chemical formula?A chemical formula uses symbols and numbers to denote the different kinds and quantities of atoms that make up a molecule to express the chemical composition of a substance. It gives details on both the composition of the compound's constituent parts and their relative amounts in the molecule.
For instance, water has the chemical formula H2O, which denotes that it is composed of two hydrogen atoms and one oxygen atom.
Therefore, the chemical formulas for nitrogen monoxide and nitrogen dioxide are:
Nitrogen monoxide: NONitrogen dioxide: [tex]NO_2[/tex]Learn more about Chemical formula, here:
https://brainly.com/question/29031056
#SPJ2
Write out the pathways by which fat and protein are catabolized from memory.
Fat, or rather triglycerides, are catabolized through beta oxidation where 2 carbons are removed from the fatty acid chain until all of them have been turned into coenzyme A. Then they proceed through the Krebs cycle and oxidative phosphoralytation to produce CO2 and ATP. Catabolization of protein breaks peptide bonds between amino acids via proteases and make carbohydrates for either glycolysis or the Krebs cycle to form ATP.
Triglycerides are catabolized by lipases to fatty acids and glycerol. The fatty acids are broken down two carbons per time, producing acetylCOA, which can enter the Krebs cycle. Proteins are catabolized to amino acids. Amino acids can be deaminated (NH3- group removed), producing carbohydrates that can enter either glycolysis or the Krebs cycle, depending on the particular amino acid.
Fat and protein are catabolized by different pathways, with fat being broken down into fatty acids and glycerol, and protein being broken down into amino acids.
Fat catabolism:
Fat in the form of triacylglycerols stored in adipose tissue is broken down by lipases into fatty acids and glycerol.
The fatty acids are transported to the mitochondria where they undergo beta-oxidation, a series of reactions that results in the production of acetyl-CoA which can be used in the citric acid cycle (also known as the Krebs cycle) to generate energy.
Protein catabolism:
Proteins are broken down into individual amino acids by proteases in the lumen of the gut, or by lysosomal proteases in the cytoplasm.
The amino acids are then transported to the liver where they undergo further breakdown. Non-essential amino acids can be converted into glucose or other energy-yielding intermediates, while essential amino acids must be converted into intermediates that can be used by the citric acid cycle.
Both fat and protein are catabolized for energy production, but the pathways involved are different.
To know more about fat and protein catabolism here:
https://brainly.com/question/4310637#
#SPJ11
mrs. smith's class is doing an experiment with thermometers. they fill up a cup with boiling water and set it on the counter. they plan to check the temperature of the water in the cup after 5, 10, 15, and 30 minutes. what will mrs. smith's class observe about the temperature of the water after 30 minutes? responses a the temperature will increase first and then decrease.the temperature will increase first and then decrease. b the temperature of the water will decrease.the temperature of the water will decrease. c the temperature of the water will increase greatly.the temperature of the water will increase greatly. d the temperature of the water will stay the same.
The temperature of water after 30 minutes will decrease. The correct option to this question is B.
The thermometer may blow up if the temperature exceeds the permitted limit. Since boiling water is known to have a temperature in the range of 100 C, a standard clinical thermometer cannot be used to measure its temperature. Query: Laboratory Boiling water's temperature can be determined using thermometers.
A thermometer's operation is an illustration of how a liquid can be heated and cooled. The molecules of the liquid in the thermometer move more quickly when it is heated, which causes them to move somewhat farther apart. The thermometer moves upward as a result.
For more information on temperature kindly visit to
https://brainly.com/question/11464844
#SPJ4
Ehe build two circuit. After checking that all the bulb work, he remove one bulb from each circuit. Explain why the bulb goe out in circuit B but tay lighted in circuit A
It's most likely that the circuit B is a series circuit while circuit A is a parallel circuit.
Circuits are basically two or more terminal components and electrical devices that is connected to each other. They can be connected in a series circuit or parallel circuit.
A series circuit is a circuit that connects its components using the same current flows. The current only has one path. Because of that, if one bulb fuses or removed, all the bulbs in the circuit won't light up.
A parallel circuit is a circuit that has multiple paths for the electric current to flow through. That makes the components have a constant voltage across all ends. Because of that, even if one bulb is removed, the other bulbs will stay lighted up.
Learn more about circuits at https://brainly.com/question/27084657
#SPJ4
use your formula sheet to answer these questions (since you will access during your exam to just the formula sheet) is each of the following soluble in water? potassium sulfate [ select ] calcium carbonate [ select ] iron(ii) hydroxide [ select ] lead(ii) fluoride [ select ] copper(i) nitrate
Potassium sulfate, calcium carbonate, and iron(II) hydroxide are all soluble in water, while lead(II) fluoride and copper(I) nitrate are not soluble in water.
Solubility is a measure of how much of a substance can dissolve in a given solvent. The solubility of a substance depends on the physical and chemical properties of both the substance and the solvent. Generally, a substance is more soluble in a solvent if the two substances have similar polarities, as this allows the molecules of the two substances to interact more easily.
The temperature also affects solubility, as increasing the temperature of a solution often increases the solubility of the solute. Additionally, the pressure can affect solubility, as increasing the pressure on a solution increases the solubility of the solute.
Learn more about solubility:
https://brainly.com/question/23946616
#SPJ4
A bar of Sam's coconut oil soap has a mass of 121 grams. The rectangular bar is 8 centimeters long, 5.5 centimeters wide, and 2.5 centimeters high. Calculate the density of Sam's coconut oil soap. Write your answer as a decimal.
The volume of the rectangular bar is the product of its dimensions that is 110 cm³. Then density of the bar weighing 121 g is 1.1 g/ cm³.
What is density ?Density of a substance is the measure of its mass per unit volume. It describes how closely its particles are packed within a given volume. It is the ratio of mass to the volume.
Volume of an object is the space occupied by the object. For a rectangle block, volume is the product of length, width and height.
Given, l = 8 cm
width = 5.5 cm
height h = 2.5 cm
volume = l w h = 8 cm ×5.5 cm × 2.5 cm = 110 cm³
Mass of the bar = 121 g
density = mass/ volume
d = 121 g/110 cm³
= 1.1g/cm³
Therefore, the density of rectangular bar is 1.1 g/cm³.
Find more on density:
brainly.com/question/15164682
#SPJ1
What property allows a compound to be classified as an Arrhenius acid?a. the production of water in a chemical reaction b. the release of hydroxide ions in a water solution c. the release of release hydrogen ions in a water solution d. the neutralization of a base
A compound is classified as an Arrhenius acid if it releases hydrogen ions (H+) in a water solution. This property is described by option "c. the release of release hydrogen ions in a water solution".
The Arrhenius theory of acids and bases states that an acid is a substance that dissociates in water to produce hydrogen ions (H+) and a base is a substance that dissociates in water to produce hydroxide ions (OH-). According to this definition, the presence of hydrogen ions in a water solution is the defining characteristic of an Arrhenius acid.
Option "a. the production of water in a chemical reaction" is not a property of Arrhenius acids. Option "b. the release of hydroxide ions in a water solution" describes a base, not an acid, according to the Arrhenius theory. Option "d. the neutralization of a base" is not a property that directly defines an acid, but it is a result of the reaction between an acid and a base.
Learn more about neutralization here:
https://brainly.com/question/15347368
#SPJ4
how does the addition of thermal energy relate to the molecules inna substance
Answer:
Its will particles move faster and its temperature will rises more.
Explanation:
after the silver ion is precipitated as silver chloride, the precipitate is washed with water. why is this washing performed and what exactly is being washed away? similarly, the iron (iii) hydroxide precipitate is washed with water. what is being washed away in this case?
Washing of silver chloride and iron (III) hydroxide precipitates is performed to remove impurities and excess reagents.
The washing step is performed to remove impurities and excess reagents that may have been present in the reaction mixture and may have gotten mixed with the precipitates.
For example, when silver chloride is precipitated, it is often washed with water to remove excess chloride ions and other contaminants. Similarly, when iron (III) hydroxide is precipitated, washing with water helps to remove excess hydroxide ions and other impurities that may have been present in the reaction mixture. These impurities can interfere with subsequent analysis or further processing of the precipitates, and washing helps to purify the precipitates and improve their quality.
To learn more about iron (III) hydroxide visit: https://brainly.com/question/29578606
#SPJ4
describe the location and light reflected on the moon throughout the month
The Moon gets its light from the Sun. In the same way that the Sun illuminates Earth, the Moon reflects the Sun's light, making it appear bright in our sky.
What reflects on the moon?Dissimilar to a lamp or our sun, the moon doesn't produce its own light. Moonlight is literally sunlight that shines on the moon and rebounds off. The light reflects off old volcanoes, craters, and lava moving on the moon's surface. The moon shines because its surface reflects light from the sun.
Sunlight is reflected off the moon in spread reflection, which is a light reflection that is involved when light rays hit a rough surface. The surface of the moon is very rough and uneven, creating light rays to hit the moon and reflect back in many different directions.
So we can conclude that The Moon is a dispersed reflector. The sunlight which hits it goes in all directions.
Learn more about Moon here: https://brainly.com/question/398659
#SPJ1
the name of Cu(C2H3O2)2
Answer:
The name of the compound Cu(C2H3O2)2 is Copper(II) acetate.
In this name "Copper" refers to the element copper (Cu) and the "II" in parentheses refers to the oxidation state of copper which is +2. "Acetate" is the anion name of C2H3O2, which is the anion present in the compound.
The IUPAC name of the compound Cu(C[tex]_2[/tex]H[tex]_3[/tex]O[tex]_2[/tex])[tex]_2[/tex] is Copper(II) acetate. In this name, "Copper" means the chemical element copper (Cu), and the "II" in brackets stands for copper's +2 oxidation state.
Whether either an ongoing link or a ring, the greatest number of carbons joined by a single bond serves as the basis for IUPAC nomenclature. According to a certain set of priorities, any deviations, whether multiple bonds and atoms other than hydrogen and carbon, are denoted by prefixes or suffixes. In this name, "Copper" means the chemical element copper (Cu), and the "II" in brackets stands for copper's +2 oxidation state. The compound's anion, C[tex]_2[/tex]H[tex]_3[/tex]O[tex]_2[/tex], is known by its anion name "acetate".
To know more about IUPAC, here:
https://brainly.com/question/16631447
#SPJ6
what mass of precipitate is expected to form when 70.0ml of 0.80 mol/l potassium hydroxide is added to 40.0ml of a 0.50mol/l iron(iii) nitrate solution?
The mass of the precipitate is form when the 70.0ml of 0.80 mol/l potassium hydroxide is added to 40.0ml of a 0.50mol/l iron(iii) nitrate solution is 0.64 g.
The balance reaction is as :
Fe(NO₃)₃(aq) + 3KOH(aq) ---> Fe(OH)₃(s) + 3KNO₃(aq)
The precipitate form = Fe(OH)₃
The molarity of KOH = 0.50 M
The volume = 0.040 L
Moles = molarity × volume
= 0.50 × 0.040
= 0.02 mol
The molarity of Fe(NO₃)₃ = 0.80 M
The volume = 0.07 L
Moles = 0.80 × 0.07
= 0.056 M
1 mole Fe(NO₃)₃ react with 3 moles of KOH
moles of KOH = 3 × 0.056
= 0.168 mol
Therefore, the KOH is the limiting reagent.
3 mole of KOH = 1 mole of Fe(OH)₃
Moles of Fe(OH)₃ = (1/3) × 0.02
= 0.006 mol
The mass of Fe(OH)₃ = 106.8 × 0.006
= 0.64 g
To learn more about precipitate here
https://brainly.com/question/13885113
#SPJ4
3.25 gram of acid hx was dissolved in water and its solution was made 250cc. if 30.2 cc of acid neutralizes 25 cc of koh
The amount of KOH required to neutralize 3.25 g of acid HX dissolved in 250 cc of water is approximately 0.0052 mol, or approximately 5.2 g (assuming the molecular weight of KOH is 56.1 g/mol).
The amount of potassium hydroxide (KOH) required to neutralize the solution made from 3.25 g of acid HX in 250 cc of water can be calculated as follows: First, we need to determine the concentration of the acid HX solution. This can be done by dividing the mass of the acid (3.25 g) by its volume (250 cc) and converting the units to moles:
3.25 g / 250 cc = 0.013 mol/cc
Next, we can use the information given in the question to calculate the number of moles of KOH required to neutralize 30.2 cc of the acid HX solution:
30.2 cc * 0.013 mol/cc / 25 cc = 0.0052 mol
So, the amount of KOH required to neutralize 3.25 g of acid HX dissolved in 250 cc of water is approximately 0.0052 mol, or approximately 5.2 g (assuming the molecular weight of KOH is 56.1 g/mol).
Learn more about moles here :
https://brainly.com/question/29367909
#SPJ4
What types of mutation are typically induced by ethyl methanesulfonate (EMS)? (check all correct answers)
transition mutations, missense mutations, point mutations
Ethyl methanesulfonate (EMS) is typically known to induce point mutations and transition mutations.
Point mutations are mutations that affect a single nucleotide in the DNA sequence. They can result in the substitution of one nucleotide for another, leading to changes in the encoded amino acid and potentially affecting the function of the encoded protein.
Transition mutations are a type of point mutation where a purine (adenine or guanine) is replaced by another purine or a pyrimidine (cytosine or thymine) is replaced by another pyrimidine. This results in changes within the DNA sequence that can affect the coding of the protein.
EMS is a chemical mutagen that acts by alkylating the DNA molecule and introducing changes in the DNA sequence. The types of mutations induced by EMS are predominantly transition mutations, which are due to the ability of EMS to alter the purine bases (adenine and guanine) in DNA.
Therefore, EMS is typically known to induce point mutations and transition mutations, but not missense mutations.
To learn more about transition mutations visit here:
https://brainly.com/question/29331316
#SPJ11
a compound containing xenon and fluorine was prepared by shining sunlight on a mixture of xe (0.618 g) and excess f2 gas. if you isolate 1.334 g of the new compound, what is its empirical formula? enter as xef, e.g. xef3
The empirical formula of the new compound is XeF2. This can be determined by calculating the number of moles of each element present in the compound.
The number of moles of Xe present is 0.618/131.293 = 0.0047 moles and the number of moles of F2 present is 1.334/37.997 = 0.035 moles.
Since the ratio of the number of moles of Xe to the number of moles of F2 is 0.0047/0.035 = 0.134, the empirical formula for the compound is XeF2.
The empirical formula is the simplest ratio of atoms in a compound that can represent its composition. It is derived by dividing the number of atoms of each element in a compound by the smallest number of atoms among them.
Learn more about The empirical formula :
https://brainly.com/question/14318768
#SPJ4
An atom of the isotope 133 Cst contains how many protons (p), neutrons (n), and electrons (e)? O 54 p. 78 n. 55 e O 55 p. 78 n, 56 e 55 p. 78 n. 54 e 55 p. 133 n. 54 e 54 p. 133 n, 55 e
An atom of the isotope 133 Cs⁺ contains the number of protons (p), neutrons (n), and electrons (e) is 55 p. 78 n. 54 e.
The Isotopes are the atoms of same element which have the same number of the protons but different number of the neutrons.
The number of protons in cesium = atomic number
= 55
The number of the electrons for the Cs⁺ ion :
The number of the electrons = 54
Atomic mass = number of protons + number of neutrons
The number of neutrons = atomic mass - number of protons
= 133 - 55
= 78
To learn more about isotopes here
https://brainly.com/question/9964075
#SPJ4
5.
Lithium stearate (octadecanoate) is made by neutralising stearic acid (octadecanoic
acid) with lithium hydroxide.
LiOH + CH,(CH₂) 16COOH
CH,(CH₂) 16COO Li* + H₂O
It is used as a component of low melting point greases that can be used down to
-60°C. In an experiment, 0-048 mole of stearic acid was neutralised by a lithium
hydroxide solution of concentration 0-64 mol dm
Calculate the volume of this lithium hydroxide solution needed to neutralise the
[2]
0-048 mole of stearic acid.
Explanation:
In order to neutralize 0.048 mole of stearic acid with a lithium hydroxide solution of concentration 0.64 mol/dm³, we need to use the balanced equation for the neutralization reaction:
LiOH + CH3(CH2)16COOH → CH3(CH2)16COOLi* + H2O
1 mole of LiOH reacts with 1 mole of stearic acid.
So the number of moles of LiOH required to neutralize 0.048 mole of stearic acid is also 0.048 mole.
The volume of a solution can be calculated by using the formula:
volume = moles x molarity
Therefore, the volume of lithium hydroxide solution needed to neutralize 0.048 mole of stearic acid is:
volume = 0.048 mol x (1/0.64 mol/dm³) = 0.075 dm³
So the volume of lithium hydroxide solution needed to neutralize 0.048 mole of stearic acid is 0.075 dm³.
The hh genotype gives rise to:
Please select the single best answer
H substance
H secretors
Bombay phenotype
h antibodies
The hh genotype gives rise to the Bombay phenotype.
The Bombay phenotype, also known as the hh phenotype, is a genetic condition that results from a specific combination of alleles at the H blood group locus. People with the Bombay phenotype have a genotype of hh, meaning they do not produce the H antigen on their red blood cells. This can have significant implications for blood transfusions, as the lack of H antigen on the surface of red blood cells can cause a potentially life-threatening reaction when transfused with blood from someone who is an H antigen secreter (i.e., has an HH or Hh genotype).
Therefore, the hh genotype gives rise to the Bombay phenotype, characterized by the absence of the H antigen on red blood cells.
To learn more about genotype visit here:
https://brainly.com/question/12116830
#SPJ11
if chlorine (cl2) costs $0.015/mol and ammonia (nh3) costs $0.0045/mol, what do these chemicals cost per ton?
The cost of 1 ton of chlorine is $212.88 and the cost of 1 ton of ammonia is $266.93.
Since cost is typically given in terms of moles, we must first calculate the number of moles of each chemical in one ton. To do this, we must know the molecular mass of each chemical. The molecular mass of chlorine is 70.906 g/mol and the molecular mass of ammonia is 17.030 g/mol. Thus, one ton of chlorine (1,000,000 g) contains 14,158.7 moles and one ton of ammonia (1,000,000 g) contains 58,822.2 moles. To calculate the cost per ton, we multiply the cost per mole by the number of moles in one ton. Thus, the cost of 1 ton of chlorine is $212.88 and the cost of 1 ton of ammonia is $266.93.
Learn more about ammonia here:
https://brainly.com/question/15409518
#SPJ4
what is the concentration of 32.00 ml of a lithium hydroxide solution if it is neutralized in a titration by 18.76 ml of 0.1850 mol/l sulfuric acid?
The concentration of the 32.00 ml of the lithium hydroxide solution if it is neutralized in the titration by 18.76 ml of 0.1850 mol/l sulfuric acid is 0.215 M.
The chemical reaction is :
2LiOH + H₂SO₄ ---> Li₂SO₄ + 2H₂O
The molarity of the H₂SO₄ = 0.1850 mol/L
The volume of H₂SO₄ = 18.76 mL = 0.01876 L
The moles of H₂SO₄ = 0.1850 × 0.01876
= 0.0034
1 mole of H₂SO₄ react with 2 moles of the LiOH
The moles of the LiOH = 0.0069
The concentration of the LiOH = moles / volume in L
= 0.0069 / 0.032
= 0.215 M
To learn more about concentration here
https://brainly.com/question/16822260
#SPJ4
the atomic weight of argon is 39.98 g/mol. argon (noble gas) atoms can be well approximated as hard spheres. argon crystallizes at about -190 c into a face centered close packed structure having four atoms per unit cell and a lattice constant (cubic unit cell edge length) of 5.43 a. estimate the hard sphere radius of argon and compute vv for solid fcc argon
Estimating the hard sphere radius of Argon, Vv for solid, liquid, and gas Argon is as follows:
The hard sphere radius of Argon can be estimated using the following equation:
r = (3/4π)^(1/3) * (V/N)^(1/3)Where V is the volume occupied by 1 Argon atom, and N is Avogadro's number. The volume occupied by 1 Argon atom can be calculated using the lattice constant (cubic unit cell edge length) of the face-centered close-packed structure of Argon:
V = (lattice constant)^3 / 4Computing Vv for solid fcc Argon:
The packing fraction for a close-packed structure can be calculated using the following equation:
Vv = π/6 * r^3Computing Vv for liquid Argon:
The packing fraction for a liquid can be calculated using the following equation:
Vv = (mass of one molecule) / (density of the liquid * volume occupied by one molecule)Computing Vv for Argon gas at STP:
The packing fraction for a gas can be calculated using the following equation:
Vv = (mass of one molecule) / (density of the gas * volume occupied by one mole of the gas at STP)Learn more about Argon here:
https://brainly.com/question/29528737
#SPJ4
Complete Question:
Packing Fractions in the Gas, Liquid and Crystalline States
(a). The atomic weight of argon is 39.98 g/mol . Argon (noble gas) atoms can be well approximated as hard spheres. Argon crystallizes at about −190C into a face-centered close packed structure having four atoms per unit cell and a lattice constant (cubic unit cell edge length) of 5.43 A . Estimate the hard sphere radius of argon and compute Vv for solid fcc argon.
(b). The density of liquid argon just above its melting point is 1.40 g/cm ^3 Calculate Vv for liquid argon.
(c). The density of argon gas at standard temperature and pressure (STP) is 1.784 g/1. Thus, one liter of argon gas at STP weighs 1.784 g. Calculate the packing fraction, Vv for argon at STP.
How did the three scientists from different parts of the world individually collaborate to win the 2019 Nobel Prize in Chemistry? In three to five sentences, explain your answer.
The 2019 Nobel Prize in Chemistry was awarded to John B. Goodenough, M. Stanley Whittingham, and Akira Yoshino for the development of lithium-ion batteries.
What are lithium-ion batteries?
A lithium-ion or Li-ion battery is described as a type of rechargeable battery which uses the reversible reduction of lithium ions to store energy.
Professor Goodenough a at the University of Texas, discovered that lithium cobalt oxide can be used as a cathode in batteries.
Professor Whittingham, at Binghamton University, developed the first functional lithium-ion battery by using a lithium metal anode and a titanium disulfide cathode.
Yoshino, a researcher at Asahi Kasei Corporation and Meijo University, removed the lithium metal from the anode, making the battery safer and longer-lasting by using petroleum coke instead.
Learn more about lithium-ion batteries at: https://brainly.com/question/5131449
#SPJ1
Consider a buffer solution where weak acid > conjugate base. How is the pH of the solution related to the pKa value of the wea kacid?
Considering a buffer solution where, weak acid > conjugate base, then the pH of the solution will be lesser than the pKa value.
A mixture containing a weak acid as well as its conjugate base or a mixture containing a weak base as well as its conjugate acid is known as a buffer solution or simply, a buffer.
In the given buffer solution, weak acid > conjugate base.
We know that,
pH = pKa + log₁₀ { [A⁻] / [HA⁻] }
So, when the weak acid has the same concentration as the conjugate base, then the pH = pKa.
But, since the concentration of the weak acid is higher than that of the conjugate base, the value of the pH will be lesser than the value of pKa as now the concentration of acid is higher.
To know more about conjugate base here
https://brainly.com/question/30086613
#SPJ4
what is amajor disturbance that caused the ecosystem to stabilize at a new equilibrium.
Fires, landslides, flooding, windstorms, and insect and pest outbreaks were among the major ecological disturbances that caused the ecosystem to stabilize at a new equilibrium.
What does it mean when an ecosystem reaches a new equilibrium?An ecosystem is said to have ecological stability (or equilibrium) if it can return to its equilibrium state after a perturbation (a capacity known as resilience) or if it does not experience unexpected large changes in its characteristics over time.Natural ecosystems are frequently extremely sensitive to change, such as the introduction or extinction of a species. A healthy ecosystem is said to be in equilibrium, a relatively stable state in which population sizes remain within a sustainable range (not too many of a certain species alive or dead).Ecosystems must have the right balance of non-living elements such as sunlight and water. To maintain equilibrium, they must have the proper balance of different species.To learn more about equilibrium refer to :
https://brainly.com/question/1083607
#SPJ1
the beakers contain aqueous solutions of the weak electrolyte h2so3 (a weak acid). which beaker best represents the compound in solution (water molecules are not shown)?
The best beaker to represent a solution containing the weak electrolyte H2SO3 (a weak acid) is Beaker A.
This is because the solution will contain hydrogen (H+) and sulfate (SO3-) ions, and the hydrogen ions will be attracted to the partially-filled oxygen atoms in the water molecules, forming hydrogen bonds.
The hydrogen bonds will be weaker than the covalent bonds between the hydrogen and oxygen atoms, making Beaker A the best representation of the solution.
Hydrogen bonds are interactions between molecules that are formed when a hydrogen atom, which is slightly positively charged, is attracted to a slightly negatively charged atom, such as an oxygen or nitrogen atom.
Learn more about hydrogen bonds:
https://brainly.com/question/24317372
#SPJ4
3.00×1017 positively charged hydrogen ions pass a point in 5.00 seconds. what is the current in amps?
The 3.00 × 10¹⁷ positively charged hydrogen ions are pass the point in 5.00 seconds. The current in amps is 9.6 × 10⁻³ amp.
The positively charged hydrogen ions = 3.00 × 10¹⁷
The current is expressed as follows :
Q = It
I = Q / t
where ,
The t = the time = 5 sec
Q = the total charge = 1.6 × 10 ⁻¹⁹ × 3 × 10¹⁷
Q = 4.8 × 10⁻²
I = 4.8 × 10⁻² / 5
I = 9.6 × 10⁻³ amp
Thus, the current in ampere is 9.6 × 10⁻³ amp.
To learn more about current here
https://brainly.com/question/28506424
#SPJ4
I need help with these two questions please
