b.
13. What i
c.
In a single movable pulley, a load of 500 N is lifted by applying 300 N effort
Calculate MA, VR and n.
[Ans: MA = 1.66, VR = 2, n = 8
83.33%]

Answer:

The package should be dropped 244.7 meters before the target

Explanation:

We need to find how long the package will take to hit the ground then solve for position.

y=0

-4.9t^2=-3000

t= sqrt (3000/4.9)

t= 24.74 seconds.

x= 247.4 meters.

Answer:

a. Magnetic field is a location of a vector field around an electric current or magnet formed due to moving electric charges, or magnetic material and has a magnetic effect and exerts a force on other magnetic materials, electric current, and electric charges. The Earth's magnetic field that has the effect of turning a compass needle is an example of a magnetic field

b. The number of turns of the coil, N, in Diagram 1.1 > The number of turns of the coil, N, in Diagram 1.2

The pattern of the iron filings in Diagram 1.1 are closer with less space in between than the pattern of iron filings in Diagram 1.2

The angle of deflection of the ammeter pointer in Diagram 1.1 will be > The angle of deflection of the ammeter pointer in Diagram 1.2, given that the number of turns and current are inversely proportional

c. i. The pattern of the iron filings will have rings which are more closely arranged to each other as the strength of the magnetic field is increased

ii. As the number of turns is increased, the magnetic field is increased

Explanation:

Answer:

Tangential speed = R * w  where w is the angular speed

For a wheel   v = .114 m * 6.53 / sec = .744 m/s

Note that this is the tangential speed - If the wheel were moving at speed V then as viewed from the ground you have

top V + v

bottom   V - v

That is the wheel also has speed due to the speed of the axle (axis of rotation)

Answer:

Explanation:

Answer:

Frequency = 24 × 10⁸ Hz

Explanation:

Given the following data;

Speed = 3 × 10⁸ m/s

Wavelength = 0.125 meters

To find the frequency of the electromagnetic wave;

Mathematically, the speed of a wave is given by the formula;

Speed = Wavelength × frequency

Substituting into the formula, we have;

3 × 10⁸ = 0.125 × frequency

Frequency = (3 × 10⁸)/0.125

Frequency = 24 × 10⁸ Hz

Answer:

The fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]

Explanation:

We are given that

Amoeba has total number of protons=[tex]1.00\times 10^{16}[/tex]

Net charge, Q=0.300pC

Electrons are fewer than protons=[tex]1.88\times 10^6[/tex]

We have to find the fraction of protons would have no electrons.

The fraction of the protons would have no electrons

=[tex]\frac{Fewer\;electrons}{Total\;protons}[/tex]

The fraction of the protons would have no electrons

=[tex]\frac{1.88\times 10^{6}}{1.00\times 10^{16}}[/tex]

[tex]=1.88\times 10^{-10}[/tex]

Hence, the fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]

Answer:

1. atomic mass of silver 108

2. 18 electrons

3.an atom is the smallest particle of a substance that can exist by itself.

molecules are groups of atom

Explanation:

1. periodics table

2. gains electron, becomes negative

Answer:

To determine the atomic mass of silver, or any other element, add the number of protons and the number of neutrons together.

If a chlorine atom gains an electron, it will have an unequal number of protons and electrons, which makes it an ion. Because electrons are negatively charged, the ion will be negatively charged, also called an anion.

An atom is the smallest component of an element that retains all of the chemical properties of that element. A molecule is two or more atoms that have bonded together.

Protons and neutrons are found in the nucleus of an atom, while electrons are found in the area surrounding the nucleus of an atom. Protons have a positive charge, electrons have a negative charge, and neutrons have no charge.

Because the lithium atom loses a negatively charged electron, it becomes a positively charged ion, or cation. Because the fluorine gains a negatively charged electron, it becomes a negatively charged ion, or anion. A bond between an anion and a cation is an ionic bond.

Graphite and diamond look different because the carbon atoms bond to one another in different ways in the two minerals. This gives each mineral a unique lattice structure and, as a result, a different physical appearance.

Answer:

The direction of friction force is toards north.

Explanation:

A tool box is at rest on the back of a track. The truck is accelerating towards north.

As the frame of reference is acceleratinf so it is a non inertial frame  of reference.

Thus, teh toolkit experineces a pseudo force towards the south direction.

According to the question, the toolbox is at rest so the fiction force is balances by teh psheudoforce, and thus teh friction force is acting toards north.

Answer:

[tex]d=0.59m[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=67.3 kg[/tex]

Spring constant [tex]\mu=1.23 * 10^3 N/m[/tex]

Fall Height [tex]h=0.921m[/tex]

Generally the Energy theorem equation for momentum is mathematically given by

Change in KE=Work done by gravity + work done by spring

[tex]0=mg*(h + d) - \frac{\mu d^2}{2}[/tex]

[tex]0=(67.3 * 9.81 (0.921 + d)) -\frac{(1.23 * 10^3 * d^2}{ 2}[/tex]

[tex]0=608.1-660.213d-615d^2[/tex]

Solving Quadratic equation

[tex]d=0.59m[/tex]

Answer:

This happens because the tin is made of estañum, and the estañum is denser than the water.

Remember the relation:

density = mass/volume

The general rule is that if an object is denser than water, it will sink

If an object is less dense than water, like a piece of wood, it will float.

And if an object has the same (or nearly the same) density as water, it will float, but fully submerged.

Based on that, we can conclude that the tin will sink because it's density is larger than the density of the water.

When the temperature of the blocks is the same as the temperature of your hand, you feel neither hot nor cold to the touch. Hence, option ( 3) is correct.

Temperature is a unit used to describe hotness or coldness. It can be stated in terms of any number of arbitrary scales and shows the direction in which heat energy will naturally flow, i.e., from a hotter body to a colder body (one at a lower temperature).

Temperature is not the same as the energy of a thermodynamic system; for instance, an iceberg has a significantly larger total heat energy than a match, despite the fact that a match is burning at a much higher temperature.

If you touch a block that is at higher than or  at lower than  the temperature of your hand, you feel hot or cold respectively. But,  when the temperature of the blocks is the same as the temperature of your hand, you feel neither hot nor cold to the touch.

Learn more about temperature here:

https://brainly.com/question/11464844

#SPJ5

Answer:

Jo

Explanation:

irradiating food doesn't make it radioactive (that's contamination) and beta particles are stopped by aluminium foil or thin metals, so it may not pass through thick packaging (usually gamma is used to irradiate foods as it can pass through the packaging)

Answer:

bhai nam kya hai (whats your name)

Explanation:

please comment

Energy can be transferred mechanically through the movement of the parts in machines, and when the motion or position of an object changes. Sound waves and seismic waves (formed during earthquakes) are mechanical waves that transfer energy through materials and from place to place.

Hope This Helps :)

Answer:

MKS stands for Meter, Kilogram and second. In this system of unit mass is given in Kilogram, length in meter and time in second. ... CGS system stands for Centimeter- Gram- Second system. In CGS system, length is measured in centimeters mass is measured in grams and time is in seconds.

Answer:

An object overall change in position

Explanation:

ans maybe corre6

Answer:

s=ut+at

its not the equation of motion..

Answer:

a. 15,000J

b. .76m

Explanation:

KE = (1/2)m*v²

KE = .5*1000kg*30m/s

KE = 15000J

PE = m*g*h

7500J = 1000kg*9.81m/s²*h

7500J = 9810*h

h = .76m

Answer:

[tex]\triangle \phi=461.5rad[/tex]

Explanation:

From the question we are told that:

Silt width [tex]w=0.15=>0.1510^{-3}[/tex]

Wavelength [tex]\lambda=462nm=462*10^{-9}[/tex]

Angle [tex]\theta=26.9[/tex]

Generally the equation for Phase difference is mathematically given by

[tex]\triangle \phi=\frac{2 \pi}{\lambda}(\frac{wsin\theta }{2})[/tex]

[tex]\triangle \phi=\frac{2 \pi}{462*10^{-9}}(\frac{0.1510^{-3}*sin 26.9 }{2})[/tex]

[tex]\triangle \phi=461.5rad[/tex]

[tex]\triangle \phi=146.89\pi[/tex]

Answer:

3,500,000 J​

Explanation:

WORK = POWER * TIME

WORK= 5400 * 640

=6456000 J = 3,500,000 J​

Answer:

D

Explanation:

edge2021

Answer:

i) The pressure acting on the base of B will be half the pressure acting on the base of A

ii) The pressure acting on the base of B will be the same as the pressure acting on the base of A

iii) The pressure on the base of drum A will be slightly less than the pressure on the base of drum B

Explanation:

The pressure acting on the base of the drum, P = h·ρ·g

Where;

h = The level of the liquid in the drum

[tex]h_{max}[/tex] = The height of the drums

ρ = The density of the liquid in the drum

g = The acceleration due to gravity ≈ 9.81 m/s²

i) If A is completely filled, we have [tex]h_A[/tex] = [tex]h_{max}[/tex]

Therefore, [tex]P_A[/tex] = [tex]h_{max}[/tex]×[tex]\rho_{liquid}[/tex]×g

If B is half filled, we have, [tex]h_B[/tex] =  (1/2)·[tex]h_{max}[/tex]

[tex]P_B[/tex] = (1/2) × [tex]h_{max}[/tex]×[tex]\rho_{liquid}[/tex]×g

Therefore, [tex]P_B[/tex] = (1/2) × [tex]P_A[/tex]

The pressure acting on the base of B will be half the pressure acting on the base of A

ii) If both A and B are each filled with water (the same liquid), then the pressure on their bases will be [tex]P_A[/tex] = [tex]h_{max}[/tex]×[tex]\rho_{water}[/tex]×g = [tex]P_B[/tex], the same, given that the acceleration due to gravity, g, is constant and the same in Nepal and India

iii) If A is filled with water, and B is filled with salty water, we have that, the density of salty water is slightly higher than water, therefore, we get;

[tex]P_A[/tex] = [tex]h_{max}[/tex]×[tex]\rho_{water}[/tex]×g <  [tex]P_B[/tex] =

The pressure on the base of drum A will be less than the pressure on the base of drum B.

Answer:

The force of gravitational attraction between them also decreas

Answer:

Explanation:

qoe39rwecwurbq;7edfqbsi

Answer:

Initially the acceleration is acceleration due to gravity and after that it is zero.

Explanation:

Describe the changes in speed and acceleration during the stages of a parachute jump. Jump from plane

As the person jump with the parachute and till the parachute is not opened, then in this condition, the acceleration is acceleration due to gravity due to which he moves in the downwards direction.

As the parachute is opened, the drag force of air and the buoyant force due to the air acts on the parachute in the upwards direction. So, the net acceleration is zero ad the force due to the gravity is balanced by the drag force and the buoyant force and thus the acceleration if zero and the person is safe.  

Answer:

Explanation:

The cell is acting like a shell .

Capacity of a shell is given by the following expression.

C= 4πk ε₀ x ab / (b-a )

k is dielectric constant , b and a are outer and inner radius ε₀ is a constant .

Here a = 2.3 x 10⁻⁶ m

b = 2.3 x 10⁻⁶ + .00375 x 10⁻⁶

= 2.30375 x 10⁻⁶ m

b -a = 3.75 x 10⁻⁹ m .

k = 9

4π ε₀ = 1 / 9 x 10⁹ = .111 x 10⁻⁹

C=  .111 x 10⁻⁹ x 9 x 2.3 x 10⁻⁶ x 2.30375 x 10⁻⁶ / 3.75 x 10⁻⁹

= 1.41 x 10⁻¹² F

= 1.41 pF .

Answer:

As we all knows that Matter is everything that occupies in space.

(A) There are three major types of Matter;

(B) (I) If John took five ice cubes from the freezer and place them into a cup after 5 minutes, he returned and saw water this process is called melting.

(ii) if he put the same cup into the freezer and turned into ice in 5 minutes this

process is called freezing.

(iii) if John places the ice from the cup into a pot on a lit stove for 2 minutes and leaves, and he returned and find the pot empty this process is called evaporation.

Answer:

The moment of inertia should be decreased.

Explanation:

The torque is given by

Torque = Moment of inertia x angular velocity

To keep the torque constant, the spin rate be increased when the moment of inertia decreases.  

The moment of inertia of the body are the efforts to put the object in rotation.  

Answer:

The specific heat of air is 100  J/kg°C.

Explanation:

mass, m = 5 kg

Temperature change, T' - T =  37 °C - 22 °C = 15°C

heat, H = 7500 J

let the specific heat of air is c.  

The formula of heat is

H = m c (T' - T)

7500 = 5 x c x 15

c = 100 J/kg°C

Answer:

2.9

Explanation:

es 2 minutos con 9 segundos seria algo así (1450)÷(500)