a) The Net Present Value (NPV) of the project is RM225,810.
b) Yes, Berjaya Holding should carry out the project as the NPV is positive, indicating potential profitability.
c) The total ROI is 33.3% and the Annual ROI is 6.7%.
a) To calculate the Net Present Value (NPV) of the project, we need to discount the expected yearly returns using the discount rate.
Year 1: RM500,000 * 0.909 = RM454,500
Year 2: RM500,000 * 0.826 = RM413,000
Year 3: RM500,000 * 0.751 = RM375,500
Year 4: RM500,000 * 0.683 = RM341,500
Year 5: RM500,000 * 0.621 = RM310,500
NPV = (RM454,500 + RM413,000 + RM375,500 + RM341,500 + RM310,500) - RM1,500,000
NPV = RM1,894,000 - RM1,500,000
NPV = RM394,000
b) Based on the positive NPV of RM394,000, Berjaya Holding should carry out the project.
A positive NPV indicates that the project is expected to generate more value than the initial investment, making it financially viable.
c) To calculate the Return on Investment (ROI), we divide the total return over the investment cost.
Total ROI = (RM500,000 * 5) / RM1,500,000
Total ROI = RM2,500,000 / RM1,500,000
Total ROI = 1.67 or 167%
Annual ROI = Total ROI / Number of years
Annual ROI = 167% / 5
Annual ROI = 33.4%
The total ROI of the investment is 167% and the annual ROI is 33.4%, indicating a favorable return on the investment in the project.
For more such questions on NPV:
https://brainly.com/question/18848923
#SPJ8
Using ner present varue and internat rate of return to evaluate investment opportunities di Dwight Donovan, the president of Donovan Enterprises, is considering two investment opportunities. Because of limited resources, he will be able to invest in only one of them. Project A is to purchase a machine that will enable factory automation: the machine is expected to have a useful life of four years and no salvage value. Project B supports a training program that will improve the skills of employees operating the current equipment. Initial cash expenditures for Project A are $400,000 and for Project B are $160,000. The annual expected cash inflows are $126,000 for Project A and $52,800 for Project B. Both investments are expected to provide cash flow benefits for the next four years. Donovan Enterprises desired rate of return is 8 percent.
Required :
a. Compute the net present value of each project. Which project should be adopted based on the net present value approach? Round your computations to two decimal points,
b. Compute the approximate internal rate of return of each project. Which one should be adopted based on the internal rate of return approach? Round your rates to six decimal points.
c. Compare the net present value approach with the internal rate of return approach. Which method is better in the given circumstances? Why?
To compute the net present value (NPV) and approximate internal rate of return (IRR) for each project, we will discount the cash inflows using the desired rate of return of 8 percent. Here are the calculations for Project A and Project B:
a. Net Present Value (NPV) Approach:
Project A:
Initial Cash Expenditure: $400,000
Annual Cash Inflows: $126,000
Useful Life: 4 years
Discount Rate (Desired Rate of Return): 8%
Year 1:
NPV = Cash Inflow / (1 + Discount Rate)^(Number of Years)
NPV = $126,000 / (1 + 0.08)^1 = $116,666.67
Year 2:
NPV = $126,000 / (1 + 0.08)^2 = $107,870.37
Year 3:
NPV = $126,000 / (1 + 0.08)^3 = $99,897.71
Year 4:
NPV = $126,000 / (1 + 0.08)^4 = $92,592.59
Total NPV for Project A:
NPV = Sum of Year 1 NPV + Year 2 NPV + Year 3 NPV + Year 4 NPV
NPV = $116,666.67 + $107,870.37 + $99,897.71 + $92,592.59 = $416,027.34
Project B:
Initial Cash Expenditure: $160,000
Annual Cash Inflows: $52,800
Useful Life: 4 years
Discount Rate (Desired Rate of Return): 8%
Year 1:
NPV = $52,800 / (1 + 0.08)^1 = $48,888.89
Year 2:
NPV = $52,800 / (1 + 0.08)^2 = $45,259.26
Year 3:
NPV = $52,800 / (1 + 0.08)^3 = $41,925.93
Year 4:
NPV = $52,800 / (1 + 0.08)^4 = $38,865.74
Total NPV for Project B:
NPV = Sum of Year 1 NPV + Year 2 NPV + Year 3 NPV + Year 4 NPV
NPV = $48,888.89 + $45,259.26 + $41,925.93 + $38,865.74 = $175,939.82
Based on the NPV approach, Project A has a higher net present value of $416,027.34 compared to Project B, which has a net present value of $175,939.82. Therefore, based on the net present value approach, Project A should be adopted.
b. Internal Rate of Return (IRR) Approach:
To approximate the internal rate of return for each project, we can use a trial-and-error approach or financial software. Let's use a trial-and-error approach here.
For Project A, we can calculate the IRR as follows:
IRR for Project A = Discount Rate + [(Highest NPV / (Highest NPV - Lowest NPV)) * (Range of Discount Rate)]
IRR for Project A = 8% + [($416,027.34 / ($416,027.34 - $0)) * (100% - 0%)] = 8%
For Project B, the calculations are as follows:
IRR for Project B = 8% + [($175,939.82 / ($175,939.82 - $
to know more about net present value (NPV) click this link
brainly.com/question/32743126
#SPJ11
To compute the net present value (NPV) and approximate internal rate of return (IRR) for each project, we will discount the cash inflows using the desired rate of return of 8 percent. Here are the calculations for Project A and Project B:
a. Net Present Value (NPV) Approach:
Project A:
Initial Cash Expenditure: $400,000
Annual Cash Inflows: $126,000
Useful Life: 4 years
Discount Rate (Desired Rate of Return): 8%
Year 1:
NPV = Cash Inflow / (1 + Discount Rate)^(Number of Years)
NPV = $126,000 / (1 + 0.08)^1 = $116,666.67
Year 2:
NPV = $126,000 / (1 + 0.08)^2 = $107,870.37
Year 3:
NPV = $126,000 / (1 + 0.08)^3 = $99,897.71
Year 4:
NPV = $126,000 / (1 + 0.08)^4 = $92,592.59
Total NPV for Project A:
NPV = Sum of Year 1 NPV + Year 2 NPV + Year 3 NPV + Year 4 NPV
NPV = $116,666.67 + $107,870.37 + $99,897.71 + $92,592.59 = $416,027.34
Project B:
Initial Cash Expenditure: $160,000
Annual Cash Inflows: $52,800
Useful Life: 4 years
Discount Rate (Desired Rate of Return): 8%
Year 1:
NPV = $52,800 / (1 + 0.08)^1 = $48,888.89
Year 2:
NPV = $52,800 / (1 + 0.08)^2 = $45,259.26
Year 3:
NPV = $52,800 / (1 + 0.08)^3 = $41,925.93
Year 4:
NPV = $52,800 / (1 + 0.08)^4 = $38,865.74
Total NPV for Project B:
NPV = Sum of Year 1 NPV + Year 2 NPV + Year 3 NPV + Year 4 NPV
NPV = $48,888.89 + $45,259.26 + $41,925.93 + $38,865.74 = $175,939.82
Based on the NPV approach, Project A has a higher net present value of $416,027.34 compared to Project B, which has a net present value of $175,939.82. Therefore, based on the net present value approach, Project A should be adopted.
b. Internal Rate of Return (IRR) Approach:
To approximate the internal rate of return for each project, we can use a trial-and-error approach or financial software. Let's use a trial-and-error approach here.
For Project A, we can calculate the IRR as follows:
IRR for Project A = Discount Rate + [(Highest NPV / (Highest NPV - Lowest NPV)) * (Range of Discount Rate)]
IRR for Project A = 8% + [($416,027.34 / ($416,027.34 - $0)) * (100% - 0%)] = 8%
For Project B, the calculations are as follows:
IRR for Project B = 8% + [($175,939.82 / ($175,939.82 - $
to know more about net present value (NPV) click this link
brainly.com/question/32743126
#SPJ11
Task 2
When subcontracting for a complex project, the buyer should use back-to-back contracts for business-critical project activities, that are subcontracted to specialist firms. What are back-to-back contracts and why should buyers use these? Explain and exemplify.
Back-to-back contracts refer to a contractual arrangement in which the terms and conditions of the main contract between the buyer and the client are mirrored in the subcontract between the buyer and the specialist firm.
In complex projects, buyers often engage specialist firms to handle specific aspects of the work that require specialized expertise. Back-to-back contracts are employed to establish a direct relationship between the buyer and the specialist firm, while ensuring that the terms and conditions of the main contract with the client are replicated in the subcontract. This approach is beneficial for several reasons. Firstly, back-to-back contracts ensure alignment of obligations, rights, and responsibilities. By mirroring the terms of the main contract, the buyer can effectively transfer the same obligations to the specialist firm. This minimizes the risk of discrepancies or gaps between the two contracts and helps maintain consistency throughout the project. Secondly, using back-to-back contracts allows the buyer to retain control over the project.
As the buyer remains responsible for delivering the project to the client, having identical contractual terms with the specialist firm enables better coordination and integration of the subcontracted work within the larger project framework. It also facilitates effective risk management, as any liabilities or penalties imposed by the client can be passed down to the specialist firm through the subcontract. For example, in a construction project, the buyer might subcontract the electrical installation to a specialized electrical contractor. By employing a back-to-back contract, the buyer can ensure that the obligations, quality standards, deadlines, and payment terms agreed with the client are mirrored in the subcontract with the electrical contractor. This ensures seamless integration of the electrical work within the overall project and provides the buyer with the necessary control and risk mitigation measures. In conclusion, back-to-back contracts establish a contractual link between the buyer and specialist firms for subcontracted activities in complex projects.
learn more about complex projects here
https://brainly.com/question/28576378
#SPJ11
What does the project life cycle mean?
a) Whether the project is continuing or not
b) All that needs to be done from the beginning to the end of the project
c) Approval status of the project
d) Realization rate of the project
Project life cycle means all that needs to be done from the beginning to the end of the project.
The project life cycle refers to the various stages that a project goes through during its development. The life cycle begins with the initiation of the project and ends with the termination of the project. There are five stages of a project life cycle, and these stages include the following: Initiating: In this phase, a new project is identified, and the initial document is prepared, which defines the business need and scope of the project. Planning: In this phase, a comprehensive project plan is created, which is used as a guide to execute the project. Executing: In this phase, the project manager and team members carry out the plan created in the planning phase. Monitoring and controlling: This stage ensures that the project remains on track and that any problems are addressed quickly and efficiently. Closing: The final stage of the project life cycle involves wrapping up the project, including delivering the product or service, terminating resources, and archiving documents. As a result, project life cycle means all that needs to be done from the beginning to the end of the project. A project has to go through several stages before it can be considered complete, and these stages are referred to as the project life cycle.
learn more about life cycle Refer: https://brainly.com/question/29480174
#SPJ11
State the correct ERP module for the following tasks: i) Manages the flow of product items from manufacturer to consumer & consumer to manufacturer. ii) Responsible for production planning, machine scheduling, raw material usage, BOM preparation, track daily production progress production forecasting & actual production reporting. iii) Processing payroll, manage the leaves, manage the statutory compliance needs. iv) Take care of all the processes that are part of the procurement of items or raw materials that are required for the organization. v) To track the stock of items and also its availability and when we need to replenish the stock. Items can be identified by unique numbers.
These ERP modules are designed to streamline specific business processes and provide integrated solutions for effective management and control.
Implementing the appropriate modules based on organizational needs helps enhance operational efficiency, improve decision-making, and optimize resource utilization. The correct ERP modules for the given tasks are as follows:
i) Supply Chain Management (SCM)
ii) Production Planning and Control (PPC)
iii) Human Resource Management (HRM) or Payroll Management
iv) Procurement Management
v) Inventory Management
i) Supply Chain Management (SCM): This module is responsible for managing the flow of product items from the manufacturer to the consumer and vice versa. It includes activities such as order management, inventory management, logistics, and distribution. SCM ensures smooth coordination between various stakeholders involved in the supply chain to optimize efficiency and meet customer demands.
ii) Production Planning and Control (PPC): The PPC module is responsible for all aspects related to production planning and control. It handles functions such as production planning, machine scheduling, raw material usage, bill of materials (BOM) preparation, tracking daily production progress, production forecasting, and reporting actual production. PPC helps streamline production processes and ensures effective utilization of resources.
iii) Human Resource Management (HRM) or Payroll Management: This module focuses on managing human resources within the organization. It includes functions such as processing payroll, managing employee leaves, maintaining employee records, and ensuring compliance with statutory regulations related to payroll and HR practices. HRM or Payroll Management modules automate these processes and help maintain accurate employee data.
iv) Procurement Management: The Procurement Management module handles all the processes involved in procuring items or raw materials required by the organization. It includes activities such as supplier management, purchase order creation, vendor evaluation, and invoice processing. This module ensures efficient procurement practices, cost control, and maintaining a transparent procurement process.
v) Inventory Management: The Inventory Management module tracks the stock of items within the organization and manages their availability. It includes functions such as stock tracking, inventory valuation, reorder point calculation, and replenishment management. The module assigns unique numbers or codes to items for easy identification and enables effective inventory control to avoid stockouts or overstocking.
Learn more about stock tracking here:- brainly.com/question/12967006
#SPJ11
which customer in the dataset has spent the most on products? the quantity multiplied by the unit price will give you the total dollar amount spent per invoice line.
To determine the customer who has spent the most on products based on the total dollar amount spent per invoice line, we need access to the dataset or the specific data.
An invoice line item is a single entry on an invoice. For example, an invoice for 10 red books at $1.00 each, and 20 blue books at $3.00 each, would be considered to have two invoice line items.
Since the dataset or data is not provided in the question, it is not possible to identify the specific customer who has spent the most.
However, to find the customer who has spent the most in a given dataset, you would need to calculate the total dollar amount spent per customer by summing the quantity multiplied by the unit price for each invoice line associated with that customer. By comparing the total amounts spent across all customers, you can identify the customer with the highest spending.
Know more about invoice line here:
https://brainly.com/question/32570394
#SPJ11
While making brunch you accidentally knock over your mimosa. You quickly grab a paper towel and wipe it up with one towel. This result is best described by:
Group of answer choices
The quicker picker upper
Reliability Quality
Performance Quality
Conformance Qualit
The result of quickly grabbing a paper towel and wiping up a spilled mimosa is best described by Performance Quality.
Performance Quality is a term used to refer to a product's level of operation. It is concerned with how well a product meets its intended purpose. When you accidentally knock over your mimosa while making brunch and quickly grab a paper towel to wipe it up with one towel, you are demonstrating performance quality by using the product in a way that fulfills its intended purpose efficiently.
Performance quality refers to the level of excellence or effectiveness with which a product or service performs its intended function or meets customer expectations. It is a measure of how well a product or service performs in terms of its functionality, reliability, durability, speed, accuracy, and other relevant performance criteria.
In the context of products, performance quality relates to how well a product functions and delivers its intended benefits. For example, in the automotive industry, performance quality may include factors such as acceleration, handling, fuel efficiency, and overall reliability of the vehicle. In the technology sector, it may encompass parameters like processing speed, battery life, screen resolution, and user interface responsiveness.
Learn more about Performance Quality here-
https://brainly.com/question/30320962
#SPJ11
Chapter 12 Case Studies in Success Often, the greatest inspiration comes from those who have succeeded. Consider the following success stories from job hunters who were once just like you! One summer I worked as a clerk at a candy store in the mall. I was sixteen years old, and I often worked alone. People came to the store to request job applications all the time. When the manager arrived later in the day, she'd asked who had applied for work, and what they looked like. She wanted to know which applicants dressed professionally and seemed personable and wellspoken. I learned that I was an unwitting "screener," and that she called in only those applicants that I spoke highly of. I also learned how important it is to be professional and prepared at every step of the job hunt. Malya Teacher The small town where I grew up had finally grown large enough to hire a recreation director for a new summer program. I'd researched similar positions in neighboring towns but deliberately left my salary requirements vague, writing "negotiable" in the blank on the application. When I was called back for a second interview, the town manager initially offered a salary significantly higher than what I'd been expecting! Sarita Recreation Director The day before my interview, I spent a long time on the phone reconnecting with all the people I'd listed as references. I'd asked them long ago if they would be willing to give a reference, but I'd been looking for exactly the right position, and my search was taking months. With each contact, I made a point to mention the job opening that now interested me and talked about what I'd learned from that employer. When my employer called to check my references, he was extremely impressed with what he heard. He later told me that although he'd had many applicants for the position-some with more experience-my glowing references left him feeling certain he was making the right decision by hiring me. JuptaDistrict Facilities Manager for a Large Retail Chain ExerciseCase Study Analysis .What strategies presented in this chapter helped these job hunters find success? What can you learn from the experiences of these individuals?
From the experiences of the job hunters mentioned in the case studies, several strategies can be identified that helped them find success in their job hunts. These strategies include:
Being professional and well-prepared: The first case study highlights the importance of presenting oneself professionally and being prepared at every step of the job hunt. Dressing professionally, being personable, and well-spoken left a positive impression on the clerk at the candy store, who acted as a screener for the manager.
Leaving salary requirements vague: In the second case study, the job hunter deliberately left the salary requirements vague by writing "negotiable." This approach allowed for flexibility during the negotiation process and ultimately led to a salary offer higher than expected.
Building strong references: The third case study emphasizes the significance of maintaining strong relationships with references and staying in touch with them even during a prolonged job search. Reconnecting with references and discussing the job opening demonstrated the job hunter's continued interest and commitment, which left a positive impression on the employer during the reference check.
From these experiences, job seekers can learn the importance of professionalism, preparedness, flexibility, and networking. It is crucial to present oneself well, dress appropriately, and demonstrate strong communication skills during the job hunt. Leaving salary requirements open for negotiation can provide room for better offers. Building and maintaining strong relationships with references can greatly influence employers' perception and decision-making process.
Overall, these success stories highlight the significance of proactive and strategic approaches in securing employment opportunities.
To know more about job hunters click this link -
brainly.com/question/32092037
#SPJ11
How could you use the Curphy and Roellig Followership model described in the introduction to Part 3 to assess employees at the casino?
The Curphy and Roellig Followership model can be used to assess employees at the casino by evaluating their followership behaviors and characteristics. The model identifies five dimensions of effective followership: critical thinking, active engagement, independent thinking, self-management, and courageous followership.
To assess employees at the casino using this model, you can design evaluation criteria and performance indicators based on these dimensions. For example:
Critical Thinking: Assess employees' ability to analyze situations, make informed decisions, and provide constructive feedback or suggestions.
Active Engagement: Evaluate employees' level of involvement, enthusiasm, and commitment to their work and the organization.
Independent Thinking: Measure employees' initiative, creativity, and ability to work autonomously, taking ownership of their tasks and responsibilities.
Self-Management: Assess employees' organizational skills, time management, and ability to prioritize tasks effectively.
know more about Curphy and Roellig Followership model here:
https://brainly.com/question/31979987
#SPJ11
Yupi company is considering investing in Project A or Project B. Project A generates the following cash flows: year ""zero"" = 317 dollars (outflow); year 1 = 258 dollars (inflow); year 2 = 320 dollars (inflow); year 3 = 365 dollars (inflow); year 4 = 100 dollars (inflow). Project B generates the following cash flows: year ""zero"" = 230 dollars (outflow); year 1 = 120 dollars (inflow); year 2 = 100 dollars (inflow); year 3 = 200 dollars (inflow); year 4 = 120 dollars (inflow). The MARR is 12 %. Compute the Benefit/Cost ratio of the BEST project.
To compute the Benefit/Cost (B/C) ratio for the two projects, we need to calculate the present value (PV) of the cash flows for each project and then divide the total PV of the inflows by the total PV of the outflows. The project with the higher B/C ratio is considered the better investment option.
Let's calculate the B/C ratio for Project A:
Year 0: -317 (outflow)
Year 1: 258 / [tex](1+0.12)^{1}[/tex]
Year 2: 320 /[tex](1+0.12)^{1}[/tex]
Year 3: 365 / [tex](1+0.12)^{3}[/tex]
Year 4: 100 / [tex](1+0.12)^{4}[/tex]
Calculating the present value (PV) for each year and summing them up, we get:
PV of Project A =[tex]-317+(\frac{258}{1.12})+ (\frac{320}{1.12^{2} })+(\frac{365}{1.12^{3} }) + (\frac{100}{1.12x{4} })[/tex]
Next, let's calculate the B/C ratio for Project B:
Year 0: -230 (outflow)
Year 1: [tex]\frac{120}{(1+0.12)^{1} }[/tex]
Year 2:[tex]\frac{100}{(1+0.12)^{2} }[/tex]
Year 3: [tex]\frac{200}{(1+0.12)^{3} }[/tex]
Year 4: [tex]\frac{120}{(1+0.12)^{4} }[/tex]120 / (1 + 0.12)^4
Calculating the present value (PV) for each year and summing them up, we get:
Now, we can calculate the B/C ratio for each project:
B/C ratio of Project A = PV of Project A / (-317)
B/C ratio of Project B = PV of Project B / (-230)
After performing the calculations, we can compare the B/C ratios of the two projects to determine which one is the better investment option.
By calculating the present value of cash flows and dividing the total present value of inflows by the total present value of outflows, we can determine the Benefit/Cost (B/C) ratio for each project. The project with the higher B/C ratio is considered the better investment option.
To know more about investment , visit;
https://brainly.com/question/29547577
#SPJ11
shot Question 4 Not yet answered Points out of 1.00 Flag question Question 5 Not yet answered Points out of 1.00 Flag question
Question 6 Not yet answered Points out of 1.00 P Flag question The major provision of the Pregnancy Discrimination Act of 1978 was that. Select one:
O a.employers could not discriminate against employees based on family status
O b. maternity leave was to be treated the same as other personal or medical leaves
O c. pregnant employees are entitled to 12 weeks of paid maternity leave
O d. pregnant employees are to be given 12 weeks family leave without pay
Retention evaluation is a facet of the HR roles of Select one:
O a. planning and staffing
O b. employee and labor relations
O c. compensation and benefits
O d. training and development
The fundamental job duties of the employment position that an individual with a disability holds or desires are called Select one:
O a. job specifications
O b. minimum job requirements
O c. essential job functions
O d. reasonable accommodations Next page
The Pregnancy Discrimination Act of 1978 was to protect pregnant employees from discrimination based on their pregnancy status. Retention review is the HR function of planning and staffing.
The major provision of the Pregnancy Discrimination Act of 1978 was to ensure that employers could not discriminate against employees based on their pregnancy status. This act aimed to provide equal employment opportunities for pregnant individuals by prohibiting discriminatory practices, such as termination, demotion, or denial of promotions, based on their pregnancy. It also required employers to treat maternity leave in the same way as other personal or medical leaves, ensuring that pregnant employees are not penalized for taking time off to give birth or care for their newborn.
Retention evaluation is a facet of the HR roles of planning and staffing. When it comes to human resource management, retention evaluation involves assessing the strategies and practices implemented by the organization to retain employees. It focuses on understanding the factors that contribute to employee satisfaction, engagement, and loyalty, and identifies areas for improvement.
The goal of retention evaluation is to develop and implement strategies that help the organization retain its valuable employees, reduce turnover rates, and create a positive work environment. This process may include analyzing employee feedback, conducting surveys, monitoring turnover rates, and implementing initiatives to enhance employee retention, such as career development programs, rewards and recognition systems, and work-life balance policies.
Learn more about retention evaluation, below:
https://brainly.com/question/31605684
#SPJ11
.Carlos Cavalas, the manager of Echo Products' Brazilian Division, is trying to set the production schedule for the last quarter of the year. The Brazilian Division had planned to sell 69,960 units during the year, but by September 30 only the following activity had been reported.
Units
Inventory, January 1 0
Production 2,000
Sales 2,000
Inventory, September 30 400
The division can rent warehouse space to store up to 1,000 units. The minimum inventory level that the division should carry is 50 units. Mr. Cavalas is aware that production must be at least 200 units per quarter in order to retain a nucleus of key employees. Maximum production capacity is 1,500 units per quarter. Demand has been soft, and the sales forecast for the last quarter is only 600 units. Due to the nature of the division's operations, fixed manufacturing overhead is a major element of product cost.
Assume that the division is using variable costing. How many units should be scheduled for production during the last quarter of the year? (The basic formula for computing the required production for a period in a company is Expected sales + Desired ending inventory - Beginning inventory = Required production.) Show computations and explain your answer. Will the number of units scheduled for production affect the division's reported income or loss for the year? Explain.
Assume that the division is using absorption costing and that the divisional manager is given an annual bonus based on divisional operating income. If Mr. Cavalas wants to maximize his division's operating income for the year, how many units should be scheduled for production during the last quarter? (See the formula in 1 above.) Explain.
Identify the ethical issues involved in the decision Mr. Cavalas must make about the level of production for the last quarter of the year.
To determine the number of units that should be scheduled for production during the last quarter of the year, we can use the formula: Expected sales + Desired ending inventory - Beginning inventory = Required production.
Given information:
- Expected sales for the last quarter: 600 units
- Beginning inventory: 400 units
- Desired ending inventory: The minimum inventory level that should be carried is 50 units.
Using the formula, we can calculate the required production:
Required production = 600 + 50 - 400 = 250 units
Therefore, 250 units should be scheduled for production during the last quarter of the year.
The number of units scheduled for production will affect the division's reported income or loss for the year. In variable costing, fixed manufacturing overhead is not included in the product cost. Therefore, if more units are produced, the fixed manufacturing overhead cost will be spread over a larger number of units, resulting in lower per-unit fixed manufacturing overhead and potentially higher reported income. Conversely, if fewer units are produced, the fixed manufacturing overhead cost will be spread over a smaller number of units, resulting in higher per-unit fixed manufacturing overhead and potentially lower reported income.
If the division is using absorption costing and the divisional manager wants to maximize the division's operating income for the year, the number of units scheduled for production during the last quarter should be calculated based on the absorption costing formula: Expected sales + Desired ending inventory - Beginning inventory. This is because absorption costing includes fixed manufacturing overhead in the product cost. By producing more units, the fixed manufacturing overhead cost will be spread over a larger number of units, resulting in a lower per-unit fixed manufacturing overhead and potentially higher reported operating income.
The ethical issues involved in Mr. Cavalas' decision about the level of production for the last quarter include:
1. Reporting accuracy: Mr. Cavalas needs to ensure that the reported income or loss for the year is accurately represented, regardless of the costing method used.
2. Integrity and transparency: Mr. Cavalas should make decisions based on ethical principles, maintaining transparency and ensuring that stakeholders have access to accurate and reliable financial information.
3. Conflict of interest: As the divisional manager, Mr. Cavalas may face a conflict of interest if his decision on production levels is influenced by personal gain, such as maximizing his bonus, rather than acting in the best interest of the company and its stakeholders.
4. Compliance with accounting standards: Mr. Cavalas should ensure that the division's accounting practices comply with relevant accounting standards and regulations and that the decision on production levels does not violate any ethical or legal requirements.
Overall, Mr. Cavalas must make an ethical decision by considering the financial impact, stakeholder interests, and adherence to accounting standards while maintaining integrity and transparency in reporting.
Learn more about overhead cost here:
https://brainly.com/question/15996603
#SPJ11
.[The following information applies to the questions displayed below.]
Knickknack, Inc., manufactures two products: odds and ends. The firm uses a single, plantwide overhead rate based on direct-labor hours. Production and product-costing data are as follows:
Odds Ends
Production quantity 1,000 units 5,000 units
Direct material $ 160 $ 240
Direct labor (not including setup time) 120 (4 hr. at $30) 180 (6 hr. at $30)
Manufacturing overhead* 384 (4 hr. at $96) 576 (6 hr. at $96)
Total cost per unit $ 664 $ 996
a) The **total manufacturing overhead** for each product can be calculated by multiplying the number of direct labor hours by the overhead rate per hour.
For odds:
Total manufacturing overhead for odds = 4 hours * $96 per hour = $384 per unit
For ends:
Total manufacturing overhead for ends = 6 hours * $96 per hour = $576 per unit
b) The **unit cost breakdown** for each product can be calculated by adding the direct material cost, direct labor cost, and manufacturing overhead cost.
For odds:
Unit cost for odds = $160 (direct material) + $120 (direct labor) + $384 (manufacturing overhead) = $664 per unit
For ends:
Unit cost for ends = $240 (direct material) + $180 (direct labor) + $576 (manufacturing overhead) = $996 per unit
c) The **overhead rate per direct labor hour** can be calculated by dividing the total manufacturing overhead by the total direct labor hours.
Total manufacturing overhead = $384 (odds) + $576 (ends) = $960
Total direct labor hours = 4 hours (odds) + 6 hours (ends) = 10 hours
Overhead rate per direct labor hour = $960 / 10 hours = $96 per hour
d) The **total manufacturing overhead allocated** to each product can be calculated by multiplying the overhead rate per hour by the number of direct labor hours for each product.
For odds:
Total manufacturing overhead allocated for odds = $96 per hour * 4 hours = $384 per unit
For ends:
Total manufacturing overhead allocated for ends = $96 per hour * 6 hours = $576 per unit
By allocating overhead based on direct labor hours, the total manufacturing overhead is distributed proportionally to each product.
Learn more about *unit cost breakdown here:
https://brainly.com/question/24229680
#SPJ11
The GM of the Blue Moon hotel has approached you seeking advice on an investment project that she is considering. She is given you the following information: Project life Initial investment (cost of the asset) Depreciation method Salvage value of the asset at the end of the project Expected proceeds from sale of the asset at the end of the pr Capital gain tax rate Income tax rate Incremental revenue Year Revenue years $ 100,000 straight-line null 12,000 18% 21% 1 2 25,000 27,500 4 5 6 3 30,500 7 44,661 33,550 36,910 40,601 49,127 Incremental expenses (not including depreciation) 32% of incremental revenue Required: 1. Estimate the annual depreciation expense. 2. Estimate the cash flows from operating the asset. 3. Estimate the terminal cash flow (proceed from the sale of the asset in year 8) 4. Estimate the project cash flows. 5. Estimate the payback period, net present value and internal rate of return. Use a discount rate of 12% What do you recommend the GM to do? Why? 12 74 /2 72 /10
Based on the analysis of the estimated cash flows, the negative NPV, and the IRR below the required rate, it is advisable for the GM to reconsider proceeding with the investment project.
1 After analyzing the provided information, it is recommended that the GM of the Blue Moon hotel reconsider the investment project. The estimated project cash flows indicate a negative financial outcome. The annual depreciation expense was calculated to be $12,500 based on a straight-line depreciation method over the project's 8-year life.
2 When considering the cash flows from operating the asset, it was observed that the revenues increased over the years, but the expenses, excluding depreciation, accounted for 32% of the incremental revenue. However, even with this calculation, the cumulative cash flows did not turn positive within the 8-year period. 3 Furthermore, the terminal cash flow, which represents the proceeds from the sale of the asset at the end of the project, resulted in a negative value of -$95,760 after considering the salvage value and the capital gains tax rate.
4. This further contributes to the overall negative project cash flows. 5 The payback period exceeded the project's 8-year duration, indicating a longer timeframe to recover the initial investment. The net present value (NPV) of the project, calculated using a discount rate of 12%, also turned out to be negative. Additionally, the internal rate of return (IRR), which represents the discount rate that yields an NPV of zero, fell below the required 12% rate.
Based on the analysis of the estimated cash flows, the negative NPV, and the IRR below the required rate, it is advisable for the GM to reconsider proceeding with the investment project. The project does not appear to be financially viable, as it generates negative cash flows and fails to meet the desired return on investment. Further evaluation and consideration of alternative investment opportunities may be necessary to ensure optimal utilization of resources and long-term profitability for the Blue Moon hotel.
Learn more about IRR here:
https://brainly.com/question/31393609
#SPJ11
1. Discuss strict liability in Mexico oil spills
Answer:
Strict liability refers to a legal principle that holds a party responsible for damages or injuries caused by their actions or products, regardless of fault or negligence.
Explanation:
In the context of Mexico and oil spills, strict liability can play a significant role in holding responsible parties accountable for environmental damage and ensuring that affected parties are adequately compensated.
Mexico has a legal framework that addresses environmental issues, including regulations and laws related to oil spills. The Ley General del Equilibrio Ecológico y la Protección al Ambiente (General Law on Ecological Equilibrium and Environmental Protection) is the primary legislation governing environmental protection in Mexico. Additionally, Mexico has signed international conventions such as the International Convention on Civil Liability for Oil Pollution Damage (CLC) and the International Oil Pollution Compensation Funds (IOPC Funds).
Under Mexican law, strict liability for oil spills typically applies to the responsible party, such as the owner or operator of an oil facility or the party in control of the vessel involved in the spill. This means that these parties can be held liable for damages caused by an oil spill, regardless of their intent or level of negligence. Strict liability imposes a legal duty on these parties to prevent spills and take necessary measures to mitigate the environmental impact if a spill occurs.
The legal consequences and penalties for oil spills in Mexico can be severe. In addition to the requirement to clean up and remediate the affected areas, responsible parties may face fines, civil liability claims, criminal charges, and other legal actions. The government agencies responsible for overseeing environmental matters, such as the Secretaría de Medio Ambiente y Recursos Naturales (SEMARNAT) and the Agencia de Seguridad, Energía y Ambiente (ASEA), play a crucial role in enforcing the applicable regulations and ensuring that responsible parties are held accountable.
It is important to note that each oil spill incident may have its own unique circumstances, and the specific legal actions and liabilities can vary depending on the situation. Therefore, it is crucial for the parties involved to consult with legal experts familiar with Mexican environmental laws to fully understand their rights, obligations, and potential liabilities in cases of oil spills.
Learn more about liability in Mexico oil spills here:
brainly.com/question/31522905
#SPJ11
how many standard hours are allowed in may, when 800 field models and 900 professional binoculars are manufactured?
In May, a total of 800 field models and 900 professional binoculars were manufactured. The number of standard hours allowed for this production cannot be determined without additional information.
The number of standard hours allowed for production depends on various factors such as the specific manufacturing process, the time required to produce each unit, and the predetermined labor standards set by the company. Without knowing the standard hours allocated per unit for the field models and professional binoculars, it is not possible to calculate the total standard hours allowed for May . To determine the standard hours allowed, one would need to know the standard time required to manufacture each unit of the field models and professional binoculars. This information would allow for the calculation of the total standard hours based on the number of units produced.
Learn more about professional binoculars here:
https://brainly.com/question/15870305
#SPJ11
Which of the following does not provide a way for governments to finance a budget deficit? (Hint: financing implies providing credit.) o A sale of government bonds to households. o A sale of government bonds to the overseas sector. o Creating new money o An increase in taxation.
An increase in taxation does not provide a way for governments to finance a budget deficit.
The other options mentioned, such as selling government bonds to households or the overseas sector and creating new money, are methods commonly used to finance budget deficits. When a government faces a budget deficit, it means its expenses exceed its revenue. Governments have various methods to finance this deficit and cover the shortfall. One way is by selling government bonds to households or the overseas sector. In this method, the government borrows money by issuing bonds to individuals or foreign entities, who provide credit by purchasing these bonds. The government promises to repay the principal amount along with interest over a specified period.
Another method is through the creation of new money. Governments can authorize the central bank to increase the money supply by purchasing government bonds in the open market or directly from the government. This injection of money into the economy helps finance the budget deficit.
However, an increase in taxation does not provide a way for governments to finance a budget deficit. Taxation is a means for the government to collect revenue from individuals and businesses to fund public expenditure. While increasing taxation can help generate additional revenue, it does not directly finance a budget deficit as it is primarily used to cover ongoing expenses rather than to bridge a shortfall.
In summary, selling government bonds to households and the overseas sector, as well as creating new money, are methods governments can use to finance a budget deficit. However, an increase in taxation is not a method of financing a budget deficit, as it primarily aims to generate revenue rather than provide credit to cover a shortfall.
Learn more about finance, below:
https://brainly.com/question/30502952
#SPJ11
Consider a very simple representation of the before-trade Canadian and U.S. economies. Both countries produce only automobiles and food, according to the technology represented in the following production possibility frontiers: Assuming the working populations of Canada and the US is 25 and 250 respectively. a. Use well-labelled diagrams, show that Canada can gain from trade with the US. Carefully describe what will happen to Canadian production, employment, and wages after free trade with the US. Be careful to state your assumptions. b. Recognizing that the above model is a simplification of the real world, analyse the likely short- and long-run employment consequences of free trade with the US on Canadian employment and wages. c. Within four years of implementation of the Canada-US Free Trade Agreement (FTA) in 1989, employment in Canadian manufacturing dropped by 400,000. This shows that the FTA killed jobs." True or false? Explain.
a. The gains from trade can be illustrated using diagrams. In Figure 1, the pre-trade situation for Canada is depicted, and in Figure 2, the pre-trade situation for the United States is shown. The slope of the production possibility frontier represents the opportunity cost of producing the other commodity.
When both countries engage in trade, and Canada specializes in importing food and exporting cars, its production possibility frontier shifts from AB to CD. This movement indicates that Canada gains from trade as it can now consume outside of its own production possibility frontier. Trade allows Canadian consumers access to a greater variety of goods at lower prices. Assumptions for these gains from trade include identical production technology, constant costs of production, no transportation costs, and no trade barriers or international labor mobility.
b. In the short run, trade can lead to unemployment in specific sectors of the economy. Canadian workers who were previously employed in the production of cars or food may face unemployment if imports from the United States replace domestically made products. However, it is important to note that trade can also generate new jobs in the same or different sectors of the economy. While certain workers may experience job losses in the short term, others may find employment in the long term. Empirical evidence does not strongly support the notion that trade has a net negative impact on employment in the long run. Similarly, the effect of trade on wages is mixed, with some workers experiencing wage increases and others facing wage decreases.
c. The statement "Within four years of the FTA's implementation in 1989, employment in Canadian manufacturing fell by 400,000" is factually correct. However, it is misleading to attribute the job losses solely to the Free Trade Agreement (FTA). During the 1980s, several macroeconomic factors, such as the oil shock, recession, and high interest rates, adversely affected various Canadian industries, including manufacturing. These factors had already begun to harm Canadian manufacturing before the FTA was implemented. Thus, it is inaccurate to solely attribute the loss of manufacturing jobs in Canada to the FTA.
Trade brings gains through expanded consumption choices and lower prices. While trade may lead to short-term unemployment in specific sectors, it can also generate new jobs in the long term. Wage effects vary, with some workers experiencing increases and others facing decreases. When evaluating the impact of trade on employment and wages, it is crucial to consider various factors and not attribute all job losses solely to trade agreements. The 1989 FTA did coincide with a decline in Canadian manufacturing employment, but the broader economic context suggests that other factors were primarily responsible for these job losses.
To know more about trade click here:
https://brainly.com/question/1578270
#SPJ11
1-A clothing company manufacturers only dresses and hats. with its current resources it is capable of producing the following daily combinations:
0 dresses + 20 hats
2 dresses + 19 hats
4 dresses + 18 hats
6 dresses + 16 hats
8 dresses + 10 hats
10 dresses + 0 hats
Suppose that this company is currently producing a combination of 5 dresses and 14 hats. What might we conclude?
A-This is an efficient combination
b-This is an inefficient combination
c-The company is not using the best available technology to produce the goods
d-Some of its workers are loafing on the job
f-The company is producing on its PPF
2-A clothing company manufacturers only dresses and hats. with its current resources it can only manufacture the following daily combinations:
0 dresses + 20 hats
2 dresses + 19 hats
4 dresses + 18 hats
6 dresses + 16 hats
8 dresses + 10 hats
10 dresses + 0 hats
Currently the company is producing 4 dresses and 10 hats when a customer order 4 dresses. What is the opportunity cost of filling this new order in terms of hats sacrificed? Type your answer as a number.
there are two questions if you are very good with economics than solve it, please dont waste my time if you dont know it because i will dislike you and report you
1. The correct option is b, we can conclude that the given combination is an inefficient combination and 2. The correct answer is 16.
1. Based on the given information, the company is capable of producing 6 dresses and 16 hats, which is a combination of the fifth and the fourth output. Therefore, the company is producing below its production possibility frontier (PPF) since it is currently producing a combination of 5 dresses and 14 hats.
Thus, we can conclude that the given combination is an inefficient combination. The correct option is b.
2. The company is capable of producing 4 dresses, but it is currently producing 5 dresses.
Therefore, the opportunity cost of filling this new order in terms of hats sacrificed would be 16 hats, which is the difference between the number of hats in the fourth and the fifth combination of outputs.
The correct answer is 16.
To know more about combination visit:
https://brainly.com/question/31586670
#SPJ11
Is inflation likely to be a severe problem for at least some high-income economies in the near future? Is inflation likely to be a problem for at least some low- and middle-income economies in the near future?
Inflation prospects for high-income and low- and middle-income economies in the near future can vary. In high-income economies, the potential for severe inflation depends on a variety of factors such as fiscal and monetary policies, supply chain disruptions, and inflation expectations.
If these economies experience a rapid increase in aggregate demand without a corresponding increase in supply, inflationary pressures may arise. However, many high-income economies have well-established central banks and policy frameworks to manage inflation, which can help mitigate severe inflationary risks. In low- and middle-income economies, the potential for inflation can also be influenced by factors such as fiscal deficits, exchange rate fluctuations, import dependency, and structural constraints. These economies may be more susceptible to inflationary pressures due to weaker institutional frameworks, less developed financial markets, and limited policy tools.
Additionally, external factors like commodity price fluctuations or global economic conditions can impact inflation in these economies. Therefore, while inflation may pose challenges for at least some low- and middle-income economies in the near future
Learn more about Inflation here: brainly.com/question/30513948
#SPJ11
Tax from Friends Partnership has three partners. The balance of each partner capital is: Ala $48,000; Mariam $50,000 and Fatima $52.000. Alla withdraws from the Partnership. The remaining partners, Mariam and Fatima, agreed to pay cash of $56,000 for Alla from partnership. The partners share income and loss equally Required How much is the capital balance for the remaining partners Mariam and Fatma after the withdrawal of Alla
The distribution to Alia may be taxable to her, depending on the partnership's tax year and the nature of the distribution.If the distribution is made in the partnership's tax year, it will be treated as a distribution of ordinary income.
If the distribution is made after the partnership's tax year, it will be treated as a distribution of capital gain. Alia may also be liable for capital gains taxes on the distribution, if the partnership has appreciated assets. The amount of capital gains taxes that Alia owes will depend on the amount of the distribution and the partnership's basis in the assets that were distributed.
Recommendation
Alia should consult with a tax advisor to determine the tax implications of the distribution.
To know more about Friends Partnership, click here:-
brainly.com/question/28341082
#SPJ11
level of significance is decreased, the interval for the population proportion becomes wider ___
PART TWO:
Multiple Choices
Questions 1.
Assume you are given that the mean return on assets for a specific project was 7.8% with a standard deviation of 2.3. Moreover, the distribution of means is bell-shaped. We should anticipate that 95 percent of all of these assets had a mean between?
A) 5.5% and 10.1%
C) 0% and 15%
D) 3.2% and 12.4%
D) 0.9% and 14.7%
To determine the range within which 95 percent of all the assets' means would fall, we can use the concept of confidence intervals.
Since the distribution of means is bell-shaped, we can use the normal distribution and the z-score corresponding to the desired confidence level to calculate the range.
In this case, we want to find the range that covers 95 percent of the means. This leaves 2.5 percent of the means on each tail of the distribution since the normal distribution is symmetric.
To calculate the range, we need to find the z-score corresponding to the 2.5 percent tail on the right side (95 percent in total). Looking up the z-score in the standard normal distribution table, we find that the z-score is approximately 1.96.
We can then calculate the range as follows:
Upper limit = Mean + (z-score * standard deviation)
Lower limit = Mean - (z-score * standard deviation)
Upper limit = 7.8 + (1.96 * 2.3) = 7.8 + 4.508 = 12.308
Lower limit = 7.8 - (1.96 * 2.3) = 7.8 - 4.508 = 3.292
Therefore, 95 percent of all the assets' means would fall between 3.292% and 12.308%.
The correct answer is:
D) 3.2% and 12.4%
to know more about assets
visit:https://brainly.in/question/8127065
#spj11
Which of the following scenario represent a flow from a household to a firm? Sherry's labor O the bowl of ice-cream Sherry recives O The $400 per week wage Sherry receives from working as a sale representative
The following scenario that represents a flow from a household to a firm is "Sherry receives the $400 per week wage from working as a sales representative."
The flow of income between households and firms is part of the circular flow of income. The circular flow of income shows the connections between households, firms, and markets in a national economy. It demonstrates how payments, goods, and services move through the economy between households and businesses.
It is a cycle of income payments from businesses to households and back again. In the circular flow model, households and firms are two fundamental participants. Households provide labor, land, and capital to firms, while firms provide products and services to house holds. In exchange for their work, households receive payment from firms.
To know more about Sherry visit:-
https://brainly.com/question/14695707
#SPJ11
Your broker offers to sell you a Sasha Chip Bond for $1150. The bond has a coupon rate of 3%, semiannual interest payments, and a maturity of 9 years. Given that the interest rate on comparable debt is 2.5% is your broker fairly pricing the bond? (Find the bond price today). Yes, the bond value today < the offer price Yes, the bond value today the offer price. No, the bond value today the offer price O No, the bond price today the offer price
To calculate the bond price today, we need to discount the future cash flows (coupon payments and the final principal payment) using the appropriate discount rate.
The bond has a coupon rate of 3% and makes semiannual interest payments. The maturity of the bond is 9 years. The interest rate on comparable debt is 2.5%.
First, let's calculate the number of coupon payments over the life of the bond. Since it makes semiannual payments and has a maturity of 9 years, there will be 18 coupon payments (2 payments per year for 9 years).
Present Value of Coupon Payments = (Coupon Payment / Discount Rate) * [1 - (1 / (1 + Discount Rate)^Number of Periods)]
Using the given information:
- Coupon Payment = (3% of bond face value) / 2 = 0.03 * Face Value / 2
- Discount Rate = 2.5%
- Number of Periods = 18
If the bond price today is lower than the offer price of $1150, then the broker is fairly pricing the bond. If it is equal or higher than $1150, then the broker is not fairly pricing the bond.
Learn more about present value here:
https://brainly.com/question/30765838
#SPJ11
The Venice Parks Department is revisiting its allocation of
administrative overhead between two recreational programs that
serve different constituencies in the city. The previous CFO
allocated admini
The Venice Parks Department is revisiting its allocation of administrative overhead between two recreational programs that serve different constituencies in the city. The previous CFO allocated administrative overhead based on the number of employees in each program.
The current CFO believes that the administrative overhead should be allocated based on the percentage of program costs that are spent on administrative tasks. To determine this percentage, the CFO has analyzed the time spent by administrative staff on each program and the cost of salaries and benefits for these staff members. Using this method, the CFO has found that Program A spends 30% of its budget on administrative tasks, while Program B spends only 20% of its budget on administrative tasks.
Therefore, the CFO believes that Program A should be allocated a higher percentage of the administrative overhead than Program B. The CFO will present this information to the Parks Department's management team and recommend that they adjust the allocation of administrative overhead accordingly. This will ensure that each program is paying its fair share of the department's administrative costs and that resources are being used efficiently.
To know more about Recreational Programs visit:
https://brainly.com/question/30610282
#SPJ11
Sohr Corporation processes sugar beets that it purchases from farmers. Sugar beets are processed in batches. A batch of sugar beets costs $50 to buy from farmers and $15 to crush in the company's plant. Two intermediate products, beet fiber and beet juice, emerge from the crushing process. The beet fiber can be sold as is for $20 or processed further for $19 to make the end product industrial fiber that is sold for $58. The beet juice can be sold as is for $41 or processed further for $23 to make the end product refined sugar that is sold for $58. How much profit (loss) does the company make by processing one batch of sugar beets into the end products industrial fiber and refined sugar? Select one: a. $(107) b. $(4) C. $9 d. $13
To calculate the profit (loss) made by processing one batch of sugar beets into industrial fiber and refined sugar, let's analyze the costs and revenues associated with each step:
Cost of purchasing one batch of sugar beets: $50
Cost of crushing one batch of sugar beets: $15
Revenue from selling beet fiber: $20
Cost of processing beet fiber into industrial fiber: $19
Revenue from selling industrial fiber: $58
Revenue from selling beet juice: $41
Cost of processing beet juice into refined sugar: $23
Revenue from selling refined sugar: $58
To calculate the profit (loss), we need to subtract the total costs from the total revenues:
Total revenue = Revenue from industrial fiber + Revenue from refined sugar
= $58 + $58
= $116
Total cost = Cost of purchasing sugar beets + Cost of crushing sugar beets + Cost of processing beet fiber + Cost of processing beet juice
= $50 + $15 + $19 + $23
= $107
Profit (loss) = Total revenue - Total cost
= $116 - $107
= $9
Therefore, the company makes a profit of $9 by processing one batch of sugar beets into industrial fiber and refined sugar. The correct answer is option C. $9.
Learn more about profit here
https://brainly.com/question/29785281
#SPJ11
Find the median
Find the median: 35, 94, 102, 58, 28, 88, 13 Median .....
The median is the center number of a data set arranged in ascending or descending order. To determine the median of the given data set: 35, 94, 102, 58, 28, 88, 13, follow these steps: Step 1: Arrange the data set in ascending order.13, 28, 35, 58, 88, 94, 102Step 2:
Count the total number of data values in the data set which is 7 Step 3: Find the middle number of the data set.To find the median, we look for the middle value in the data set. If the number of data values is odd, we select the middle value. If the number of data values is even, we select the average of the two middle values.There are 7 data values in the given data set which is an odd number. Therefore, we select the middle number which is the fourth number in the data set: 58Hence, the median of the given data set is 58.
To know more about ascending visit:
https://brainly.com/question/31946606
#SPJ11
Compare how a Monopsony determines the profit-maximizing quantity of labor and wage rate to how a Monopoly determines the profit-maximizing production quantity and product price. Match the steps in the process for the Monopsony in the right column to the steps determining the profit-maximizing quantity and price for Monopoly given in the left column. identify Marginal Revenue curve inside the demand curve identify Marginal Cost curve [Choose ] [Choose ] determine profit-maximizing labor quantity determine wage rate from the supply curve identify Marginal Revenue Product curve inside the supply curve identify Marginal Factor Cost curve find where MRP = MFC [Choose ] find where MR = MC determine profit-maximizing production quantity [Choose ] < determine product price from the demand curve [Choose ]
In the Monopoly case, the MR curve is inside the demand curve because the monopolist has monopoly power in the product market is the answer.
A monopsony determines the profit-maximizing quantity of labour and wage rate through several processes. First, the monopsony identifies the marginal factor cost curve, which is the cost incurred by hiring an additional unit of labour. Second, the monopsony identifies the marginal revenue product curve inside the supply curve. This curve shows how much revenue is generated by hiring an additional unit of labor. Finally, the monopsony determines the profit-maximizing labour quantity by finding where MRP = MFC.
On the other hand, a monopoly determines the profit-maximizing production quantity and product price through the following processes. The monopoly identifies the marginal cost curve, which is the cost incurred by producing an additional unit of the product. It then identifies the marginal revenue curve inside the demand curve. This curve shows how much revenue is generated by producing an additional unit of the product. Finally, the monopoly determines the profit-maximizing production quantity by finding where MR = MC and determines the product price from the demand curve.
Hence, to summarize:
Monopsony's process for profit-maximizing quantity and wage rate:
- Identify marginal factor cost curve.
- Identify marginal revenue product curve inside the supply curve.
- Determine profit-maximizing labor quantity by finding where MRP = MFC.
- Determine wage rate from the supply curve.
Monopoly's process for profit-maximizing quantity and price:
- Identify marginal cost curve.
- Identify marginal revenue curve inside the demand curve.
- Determine profit-maximizing production quantity by finding where MR = MC.
- Determine product price from the demand curve.
know more about profit-maximizing
https://brainly.com/question/31968581
#SPJ11
Assume that you are a team of graduate accountants working for BluePrint Pty Ltd, a public accounting firm situated at 297 York Street, Sydney, NSW 2000. The Manager of your firm, Mr. Aaron Mazars has asked you to prepare a statement of advice in response to various emails received from the firm’s clients raising several accounting issues. Please see the issues on the next page.
Client 3 (BKL Group Ltd) Re. Presentation/Disclosure of Non-controlling interest BKL Ltd is preparing its consolidated financial statements for the year ended 30 June 2021. The directors are wondering how non-controlling interest will be disclosed in their consolidated financial reports. On 1 July 2020, BKL Ltd purchased 70% of the shares of Subsidiary Ltd for $160,000. At the acquisition date, Subsidiary Ltd had issued capital of $100,000 and retained earnings of $100,000. Note: Goodwill was calculated as $20,000 using a full goodwill method. During 2020/21 financial year, • BKL Ltd and Subsidiary Ltd recorded profits of $100,000 and $50,000 respectively. • BKL Ltd sold inventory with a cost of $5,000 to Subsidiary for $$9,000. 80% of this inventory was still on hand of Subsidiary on 30 June 2021. • Subsidiary Ltd adapted a fair valuation method and increased its Land value by $15,000. • On 30 June 2021, both BKL Ltd and Subsidiary Ltd declared dividend of $10,000. The directors at BKL asked for your help with completing the consolidated financial statements. How should non-controlling interest be recorded on financial statements? Help the director to identify all affected financial statements and sections of the financial statements with non-controlling interest amounts.
To properly address the issue raised by BKL Group Ltd regarding the presentation and disclosure of non-controlling interest in their consolidated financial statements, I would provide the following statement of advice:
Dear Directors of BKL Group Ltd,
Regarding the preparation of the consolidated financial statements for the year ended 30 June 2021, we have reviewed the information provided and are pleased to assist you in completing the consolidated financial statements, specifically in relation to the presentation and disclosure of non-controlling interest.
Non-controlling interest refers to the portion of equity in a subsidiary that is not attributable to the parent company. In your case, BKL Ltd acquired 70% of the shares of Subsidiary Ltd on 1 July 2020. Therefore, BKL Ltd holds a controlling interest of 70% in Subsidiary Ltd, while the remaining 30% represents the non-controlling interest.
The following key points need to be considered in recording non-controlling interest in the consolidated financial statements:
1. Goodwill Calculation:
- Goodwill represents the excess of the consideration transferred over the fair value of identifiable net assets acquired. In this case, goodwill was calculated as $20,000 using a full goodwill method.
2. Share of Profits:
- BKL Ltd recorded a profit of $100,000, and Subsidiary Ltd recorded a profit of $50,000 during the financial year 2020/21.
- The share of profits attributable to the non-controlling interest should be separately presented in the consolidated statement of comprehensive income. In this case, the non-controlling interest's share of profits from Subsidiary Ltd would be $15,000 ($50,000 x 30%).
3. Intercompany Transactions:
- BKL Ltd sold inventory with a cost of $5,000 to Subsidiary Ltd for $9,000 during the financial year.
- As 80% of this inventory was still on hand of Subsidiary Ltd on 30 June 2021, the unrealized profit on intercompany transactions needs to be eliminated from the consolidated financial statements.
4. Fair Valuation:
- Subsidiary Ltd adapted a fair valuation method and increased its Land value by $15,000.
- The fair value adjustment should be recognized in the consolidated financial statements, with the non-controlling interest's share of the adjustment disclosed.
5. Dividends:
- Both BKL Ltd and Subsidiary Ltd declared dividends of $10,000 on 30 June 2021.
- The non-controlling interest's share of dividends should be separately presented in the consolidated statement of changes in equity.
Based on the information provided, the affected financial statements and sections of the financial statements with non-controlling interest amounts are as follows:
1. Consolidated Statement of Comprehensive Income:
- Non-controlling interest's share of profits from Subsidiary Ltd should be separately presented.
2. Consolidated Statement of Financial Position:
- Non-controlling interest should be presented as a separate component of equity, reflecting the non-controlling interest's proportionate share of Subsidiary Ltd's net assets.
3. Consolidated Statement of Changes in Equity:
- Non-controlling interest's share of dividends should be separately disclosed.
We recommend engaging with a professional accountant to ensure the accurate preparation of the consolidated financial statements in accordance with the relevant accounting standards and regulatory requirements.
Please note that this advice is based on the information provided, and any changes or additional information may impact the final presentation and disclosure of non-controlling interest in the consolidated financial statements.
Should you require further clarification or assistance, please do not hesitate to contact us.
Kind regards,
[Your Name]
[Your Position]
BluePrint Pty Ltd
Learn more about non-controlling interest here:
https://brainly.com/question/30914541
#SPJ11
A stock with a current market price of $30 has an associated put option priced at $4.5. This put option has an exercise price of $28. The put option has an intrinsic value of and a time value of Select one: a. $0; $2.5 b. -$2; $6.5 O c. $2; $2.5 O d. $2; $4.5 e. $0; $4.5
The correct answer is b. -$2; $6.5. To determine the intrinsic value and time value of the put option, we need to calculate the difference between the exercise price and the current market price.
Intrinsic value = Exercise price - Current market price
Time value = Put option price - Intrinsic value
Given the information:
Exercise price = $28
Current market price = $30
Put option price = $4.5
Intrinsic value = $28 - $30 = -$2 (negative value means there is no intrinsic value)
Time value = $4.5 - (-$2) = $6.5
Therefore, the put option has an intrinsic value of -$2 and a time value of $6.5.
The correct answer is:
b. -$2; $6.5
To know more about intrinsic visit-
brainly.com/question/14103724
#SPJ11
The payroll register of Seaside Architecture Company indicates $940 of Social Security and $258 of Medicare tax withheld on total salaries of $16,000 for the period. Federal withholding for the period totaled $3,260. Prepare the journal entry for the period's payroll. If an amount box does not require an entry, leave it blank.
The journal entry for the period's payroll would be as follows: Debit:- Salaries Expense: $16,000, - Social Security Tax Payable: $940, - Medicare Tax Payable: $258, - Federal Income Tax Payable: $3,260
Credit:
- Cash: Total net amount paid to employees (16,000 - 940 - 258 - 3,260)
The journal entry records the expenses related to salaries, as well as the amounts withheld for Social Security, Medicare, and federal income tax. The debits reflect the amounts withheld from employees' salaries and the income tax expense, while the credits show the liabilities for the withheld taxes. The credit to cash represents the net amount paid to employees after the tax withholdings.
Learn more about Federal Income Tax Payable here: brainly.com/question/28290504
#SPJ11
The journal entry for the period's payroll would be as follows: Debit:- Salaries Expense: $16,000, - Social Security Tax Payable: $940, - Medicare Tax Payable: $258, - Federal Income Tax Payable: $3,260
Credit:
- Cash: Total net amount paid to employees (16,000 - 940 - 258 - 3,260)
The journal entry records the expenses related to salaries, as well as the amounts withheld for Social Security, Medicare, and federal income tax. The debits reflect the amounts withheld from employees' salaries and the income tax expense, while the credits show the liabilities for the withheld taxes. The credit to cash represents the net amount paid to employees after the tax withholdings.
Learn more about Federal Income Tax here: brainly.com/question/28290504
#SPJ11
