Boots Roofing just paid its annual dividend of $.90 a share. The firm recently announced that all future dividends will be increased by 3.5 percent annually. What is one share of this stock worth to you if you require a 12 percent rate of return? a. $10.30 b. $10.35 c. $10.59 d. $10.78 e. $10.96 To whoever answers this can you please write down the calculator inputs please? I'd like to be able to do these on my own and giving me the answer alone doesn't help me. Thank you.

Answers

Answer 1

To calculate the present value of the stock using a financial calculator, you can follow these steps:

Input the required rate of return: 12% or 0.12 as the interest rate.

Input the initial dividend payment: $0.90 as the cash flow.

Input the dividend growth rate: 3.5% or 0.035 as the growth rate.

Using these inputs, you can calculate the present value of the stock. The correct option will be the one that matches the calculated present value.

Using the formula for the present value of a growing perpetuity, the calculation can be done as follows:

PV = D0 / (r - g)

Where:

PV = Present value of the stock

D0 = Initial dividend payment

r = Required rate of return

g = Dividend growth rate

Calculating the present value:

PV = $0.90 / (0.12 - 0.035)

PV ≈ $10.96

Therefore, the correct answer is e) $10.96.

Keep in mind that financial calculators may vary slightly in their inputs and functions, so it's best to refer to your specific calculator's user manual for accurate instructions.

Learn more about financial here

https://brainly.com/question/1265337

#SPJ11


Related Questions

Lear Inc. has $800,000 in current assets, $350,000 of which are considered permanent current assets. In addition, the firm has $600.000 Invested in capital assets. a. Lear wishes to finance all capital assets and half of its permanent current assets with long-term financing costing 10 mm term financing currently costs 5 percent. Lear's earnings before Interest and taxes are $200,000. Determine Lear's earnings under this financing plan. The tax rate 1= 30 percent. Earnings after taxes b. As an alternative. Lear might wish to finance all capital assets and permanent current assets plus half of its temporary current assets with long-term financing. The same interest rates apply as in part a. Earnings before interest and taxes will be $200,000. What will be Lear's earnings after taxes? The tax rate is 30 percent. Earnings after taxes c. This part of the question is not part of your Connect assignment. tax

Answers

Under the financing plan, Lear's earnings after taxes would be $115,500, and with the alternative financing plan, Lear's earnings after taxes would be $105,000.

In the given scenario, Lear Inc. has two financing options: one where it finances capital assets and half of permanent current assets with long-term financing, and the other where it finances capital assets, permanent current assets, and half of temporary current assets with long-term financing.

Under the first financing plan, the earnings before interest and taxes (EBIT) of $200,000 will be reduced by interest expense of $35,000 (5% of $700,000) and then taxed at a 30% rate, resulting in earnings after taxes of $115,500.

Under the alternative financing plan, the EBIT of $200,000 will be reduced by interest expense of $50,000 (5% of $1,000,000) and then taxed at a 30% rate, resulting in earnings after taxes of $105,000.

The difference in earnings after taxes between the two financing plans is $10,500. This indicates that the choice of financing plan can have a significant impact on the company's profitability. It is important for Lear Inc. to carefully evaluate the financing options and consider the trade-offs between interest expense and tax implications in order to make an informed decision that maximizes its earnings.

To know more about taxes, visit:

https://brainly.com/question/13448049

#SPJ11

Capitalism and socialism Check the countries whose economies are best described as "mixed," combining aspects of both capitalism and socialism. Check all that apply. Belgium Netherlands Luxembourg Denmark Ireland. Which of the following are defining characteristics of a socialist economy? Check all that apply. Decentralized decision making through markets Public ownership of resources Centralized decision making Private ownership of resources An authoritarian government

Answers

The countries Belgium, Netherlands, Luxembourg, Denmark, and Ireland can be described as having mixed economies, combining aspects of both capitalism and socialism.

The defining characteristics of a socialist economy are:

Decentralized decision making through markets (not applicable to socialist economies, as decision making is typically more centralized)Public ownership of resources (public ownership is a characteristic of socialist economies)Centralized decision making (centralized decision making is a characteristic of socialist economies)Private ownership of resources (not applicable to socialist economies, as resources are typically owned collectively or by the state)An authoritarian government (while some socialist countries may have authoritarian governments, it is not a defining characteristic of a socialist economy)

Therefore, the defining characteristics of a socialist economy are public ownership of resources and centralized decision making.

To know more about socialist visit-

brainly.com/question/30115403

#SPJ11

Holiday Corp, has two divisions, Quall and Marlin. Quail produces a widget that Marlin could use in its production Quail's variable costs are $5.30 per widget while the full cost is $8.30. Widgets sell on the open market for $14.60 each. If Quall has excess capacity, what would be the cost savings if the transfer were made and Marlin currently is purchasing 165.000 units on the open market? Multiple Choice a. $1534.500 b. $0 c. $1369.500 d. $2.409,000

Answers

The transfer cost savings in dollars if Quail division transfer the widget to Marlin division and Marlin currently is purchasing 165,000 units on the open market would be $1369.500.Option (c) $1369.500 is the correct answer.A transfer of widgets from Quail to Marlin can be justified if the transfer price of widgets is below the market price for widgets that Marlin currently purchases on the open market.

The cost savings that will occur can be calculated using the following formula:Transfer Cost Savings = Purchase Cost - Transfer Cost.Purchase cost = 165,000 × $14.60 = $2,409,000Variable cost per widget = $5.30Full cost per widget = $8.30Transfer price = Full cost per widgetSince Quail has excess capacity, it will only transfer widgets at full cost of $8.30.Transfer Cost Savings = $2,409,000 - ($8.30 × 165,000)Transfer Cost Savings = $2,409,000 - $1,040,500Transfer Cost Savings = $1369.500

Therefore, the transfer cost savings in dollars if Quail division transfer the widget to Marlin division and Marlin currently is purchasing 165,000 units on the open market would be $1369.500.Marlin division and Marlin currently is purchasing 165,000 units on the open market would be $1369.500.Option (c) $1369.500 is the correct answer.A transfer of widgets from Quail to Marlin can be justified if the transfer price of widgets is below the market price for widgets that Marlin currently purchases on the open market.

TO know more about  cost savings Visit:

https://brainly.com/question/31366599

#SPJ11

Rondos Renegades is analyzing a proposed project. The company expects to sell 2,400 units, +/- 4 percent. The expected variable cost per unit is $280 and the expected fixed costs are $495,000. Cost estimates are considered accurate within a plus or minus 2 percent range. The depreciation expense is $95,000. The sales price is estimated at $740 per unit, plus or minus 5 percent. What is the sales revenue under the best case scenario? Multiple Choice: $1,776,000 $1,592,490 $1,939,392 $1,897,896 $1,799,242.00

Answers

The sales revenue under the best case scenario is c) $1,939,392.

To calculate the sales revenue under the best-case scenario, we need to consider the highest possible values for the variables.

The highest sales volume would be 2,400 units + 4% of 2,400 units = 2,496 units.

The highest sales price would be $740 per unit + 5% of $740 = $777 per unit.

Therefore, the sales revenue under the best-case scenario would be:

Sales revenue = Number of units sold ×Sales price per unit

Sales revenue = 2,496 units × $777 per unit

Sales revenue = $1,939,392

Hence, the sales revenue under the best-case scenario is $1,939,392.

Learn more about sales revenue here:

brainly.com/question/28580932

#SPJ11

Dana Company manufactures and sells a single product. The following costs were incurred during the company's first year of operations: Variable costs per unit: Manufacturing: Direct materials $ 20 Direct labor Variable manufacturing overhead $3 Variable selling and administrative $3 Fixed costs per year: Fixed manufacturing overhead $ 250,000 Fixed selling and administrative expenses $120,000 During the year, the company produced 18,000 units and sold 15,000 units. The selling price of the company's product is $65 per unit. Required: Assume that the company uses absorption costing: a) Compute the unit product cost. (3 marks) (5 marks) b) Prepare an income statement for the year (use the detailed format of income statement which shows the calculation of the cost of goods sold).

Answers

(a) Unit product cost under absorption costing:

To calculate the unit product cost under absorption costing, we need to consider both variable and fixed manufacturing costs.

Variable manufacturing cost per unit:
Direct materials = $20
Direct labor = $0 (already accounted for in fixed manufacturing overhead)
Variable manufacturing overhead = $3

Fixed manufacturing cost per unit:
Total fixed manufacturing overhead = $250,000
Number of units produced = 18,000
Fixed manufacturing cost per unit = Total fixed manufacturing overhead / Number of units produced

Total unit product cost:
Unit product cost = Variable manufacturing cost per unit + Fixed manufacturing cost per unit

b) Income statement for the year (detailed format showing calculation of cost of goods sold):


Dana Company Income Statement
For the Year Ended [Year]

Sales revenue: (15,000 units sold x $65 per unit)
Less: Cost of goods sold:
Beginning inventory

Cost of goods manufactured (18,000 units x Unit product cost from part a)
Ending inventory
Gross profit
Less: Selling and administrative expenses (Variable selling and administrative + Fixed selling and administrative)
Net income
In the income statement, the cost of goods sold includes the cost of beginning inventory, the cost of goods manufactured (which is calculated using the unit product cost), and the adjustment for ending inventory. Gross profit is determined by subtracting the cost of goods sold from the sales revenue.

Selling and administrative expenses (both variable and fixed) are then deducted to arrive at the net income.

Please note that the actual calculations for the unit product cost and income statement depend on the specific values provided in the question

To know more about unit production cost please visit:

brainly.com/question/31936853

#SPJ11

(Interest rate determination) You've just taken a job at an investment banking firm and been given the job of calculating the appropriate nominal interest rate for a number of different Treasury bonds with different maturity dates. The real risk-free interest rate that you have been told to use is 2.5%, and this rate is expected to continue on into the future without any change. Inflation is expected to be constant over the future at a rate of 2.0%. Since these are bonds that are issued by the US Treasury, they do not have any default risk or any liquidity risk (that is, there is no liquidity-risk premium). The maturity-risk premium is dependent upon how many years the bond has to maturity. The maturity-risk premiums are shown in the popup window. Given this information, what should the nominal rate of interest on Treasury bonds maturing in 0-1 year, 1-2 years 2-3 years, and 3-4 years be? -CTD The nominal rate of interest on Treasury bonds maturing in 0-1 year should be% (Round to two decimal places)

Answers

The interest rate that is expressly stated on a loan or investment instrument is called the nominal interest rate, sometimes referred to as the stated interest rate or annual percentage rate (APR). It displays the annualized proportion of the principal sum that will be paid or accrued as interest over a certain time frame.

Given that the real risk-free interest rate is 2.5%, inflation is 2.0%, and the maturity-risk premiums are shown in the popup window. The nominal interest rate formula is given as:

Nominal interest rate = Real risk-free interest rate + Inflation premium + Default risk premium + Liquidity premium + Maturity-risk premium. Real risk-free interest rate = 2.5%. Inflation premium = 2.0%. Liquidity premium = 0% (given). Default risk premium = 0% (given).

Therefore, the nominal interest rate on Treasury bonds maturing in 0-1 year would be: Nominal interest rate = Real risk-free interest rate + Inflation premium + Default risk premium + Liquidity premium + Maturity-risk premium= 2.5% + 2.0% + 0% + 0% + 0.5%= 5.0%Therefore, the nominal rate of interest on Treasury bonds maturing in 0-1 year is 5.0%.

To know more about Nominal Interest Rate visit:

https://brainly.com/question/13324776

#SPJ11

Plant assets are used in business and have useful ves that extend over more than one account pend O True O False

Answers

True. Plant assets are used in business and have useful lives that extend over more than one accounting period. Plant assets, also known as property, plant, and equipment (PP&E), are long-term tangible assets used in the operations of a business. They are not intended for sale and are expected to provide economic benefits to the business over multiple accounting periods.

Examples of plant assets include buildings, machinery, equipment, vehicles, and furniture. These assets are typically used in the production, manufacturing, or service delivery processes of a business. They are recorded on the balance sheet and are subject to depreciation, which allocates the cost of the asset over its useful life.

Since plant assets have useful lives that extend beyond the current accounting period, their costs are allocated over multiple periods to match the expenses with the revenue generated from their use. This practice adheres to the matching principle in accounting, ensuring that expenses are recognized in the periods in which the related revenues are earned.

To know more about plant assets, please visit

https://brainly.com/question/28919217

#SPJ11

Which statements are TRUE in the TOC approach to capacity management. 1. First step is to determine the bottleneck work centers II. Find quick solutions for eliminating bottlenecks III. TOC uses infinite scheduling IV. Increasing utilization of nonbottlenecks will yield higher inventories O I, II, III and IV O I, II and IV I, II and III I, III and IV O II, III and IV

Answers

The statements that are TRUE in the Theory of Constraints (TOC) approach to capacity management are:

I. First step is to determine the bottleneck work centers.

III. TOC uses infinite scheduling.

These statements accurately describe key aspects of the TOC approach to capacity management. Identifying bottleneck work centers is crucial in TOC because they limit the overall throughput of the system. By addressing and optimizing the performance of bottleneck work centers, the system's overall capacity can be improved. Additionally, TOC utilizes the concept of infinite scheduling, which means that the non-bottleneck work centers are scheduled to operate at full capacity without any idle time, ensuring optimal utilization.

Therefore, the correct answer is:

O I, II, III and IV.

Learn more about capacity here

https://brainly.com/question/31196313

#SPJ11

.Maxim Corp. has provided the following information about one of its products:
Date Transaction Number of Units Cost per Unit
1/1 Beginning Inventory 285 $157
6/5 Purchase 485 $177
11/10 Purchase 185 $217
During the year, Maxim sold 570 units.
What is cost of goods sold using the average cost method?

Answers

To calculate the cost of goods sold (COGS) using the average cost method, we need to determine the average cost per unit and multiply it by the number of units sold.

First, let's calculate the total cost of the inventory by summing up the cost of the beginning inventory and the purchases:

Beginning Inventory Cost = 285 units * $157 per unit = $44,745

Purchase 1 Cost = 485 units * $177 per unit = $85,845

Purchase 2 Cost = 185 units * $217 per unit = $40,045

Total Inventory Cost = Beginning Inventory Cost + Purchase 1 Cost + Purchase 2 Cost

= $44,745 + $85,845 + $40,045

= $170,635

Next, we calculate the weighted average cost per unit by dividing the total inventory cost by the total number of units:

Weighted Average Cost per Unit = Total Inventory Cost / Total Number of Units

= $170,635 / (285 + 485 + 185)

= $170,635 / 955

≈ $178.86 (rounded to two decimal places)

Finally, we can calculate the cost of goods sold by multiplying the weighted average cost per unit by the number of units sold:

COGS = Weighted Average Cost per Unit * Number of Units Sold

= $178.86 * 570

≈ $101,983.20 (rounded to two decimal places)

Therefore, the cost of goods sold using the average cost method is approximately $101,983.20.

To know more about sold visit-

brainly.com/question/24078007

#SPJ11

Robert wants to accumulate at least $45,000 by depositing $1,300 at the end of each month into a fund that earns interest at 5.25% compounded monthly. a. How many deposits does he need to make in order to reach his goal? Round to the next payment b. How long will it take Robert to reach his goal? year(s) month(s) Express the answer in years and months, rounded to the next payment period You plan to save money for a down payment of $41,000 to purchase an apartment. You can only afford to save $6,000 at the end of every 6 months into an account that earns interest at 4.25% compounded monthly. How long will it take you to save the planned amount? years months Express the answers in years and months, rounded to the next payment period Lush Gardens Co. bought a new truck for $50,000. It paid $5,000 of this amount as a down payment and financed the balance at 6.50% compounded semi-annually. If the company makes payments of $2,100 at the end of every month, how long will it take to settle the loan? years months

Answers

a. To calculate the number of deposits Robert needs to make in order to reach his goal of $45,000, we can use the future value of an ordinary annuity formula:

FV = P * [(1 + r)^n - 1] / r

Where:

FV = Future value ($45,000)

P = Monthly deposit ($1,300)

r = Interest rate per period (5.25% divided by 12)

n = Number of deposits

Plugging in the values:

$45,000 = $1,300 * [(1 + 0.0525/12)^n - 1] / (0.0525/12)

Solving for n:

n ≈ 41.55

Since we need a whole number of deposits, rounding up to the next payment, Robert needs to make 42 deposits to reach his goal.

b. To calculate how long it will take Robert to reach his goal in years and months, we divide the number of deposits (42) by 12 to get the number of years, and take the remainder to calculate the number of months:

42 deposits ÷ 12 = 3 years (no remainder)

Therefore, it will take Robert 3 years to reach his goal.

For the next set of questions:

You plan to save money for a down payment of $41,000 to purchase an apartment. You can only afford to save $6,000 at the end of every 6 months into an account that earns interest at 4.25% compounded monthly.

Using a similar approach:

Future value formula:

FV = P * [(1 + r)^n - 1] / r

Where:

FV = Future value ($41,000)

P = Semi-annual deposit ($6,000)

r = Interest rate per period (4.25% divided by 12)

n = Number of deposits

Plugging in the values:

$41,000 = $6,000 * [(1 + 0.0425/12)^n - 1] / (0.0425/12)

Solving for n:

n ≈ 6.56

Since we need a whole number of deposits, rounding up to the next payment, it will take approximately 7 deposits (3.5 years) to save the planned amount.

Lush Gardens Co. bought a new truck for $50,000. It paid $5,000 of this amount as a down payment and financed the balance at 6.50% compounded semi-annually. If the company makes payments of $2,100 at the end of every month, we can calculate how long it will take to settle the loan using the future value of an ordinary annuity formula:

FV = P * [(1 + r)^n - 1] / r

Where:

FV = Future value ($50,000 - $5,000 = $45,000)

P = Monthly payment ($2,100)

r = Interest rate per period (6.50% divided by 2)

n = Number of payments

Plugging in the values:

$45,000 = $2,100 * [(1 + 0.065/2)^n - 1] / (0.065/2)

Solving for n:

n ≈ 29.81

Since we need a whole number of payments, rounding up to the next payment, it will take approximately 30 payments (2.5 years) to settle the loan.

Learn more about Future value here:

brainly.com/question/30787954

#SPJ11

Which of the following statements about the 1828 election is true?

A)Jackson believed that liberty could best be supported by a powerful national government.

B)Jackson's platform was based on strengthening tariffs and infrastructure.

C)Jackson represented populist frustration with the political elite.

D)Jackson enjoyed popular support, but only won by two electoral votes.

Answers

The true statement about the 1828 election is that Jackson represented populist frustration with the political elite.

In the 1828 election, Andrew Jackson emerged as a prominent figure in American politics. He represented a populist movement that expressed frustration with the existing political elite. Jackson campaigned as a champion of the common man and sought to challenge the entrenched power structures. He positioned himself as an outsider who would bring about a more democratic government, responsive to the needs and interests of ordinary citizens.

While Jackson's platform did include elements such as strengthening tariffs and infrastructure (option B), the key distinguishing factor of the 1828 election was Jackson's ability to tap into the widespread discontent with the political elite. His appeal to the masses and his portrayal as a representative of the common people contributed to his success in the election.

Option A, which suggests that Jackson believed in a powerful national government to support liberty, is not accurate. Jackson was known for his advocacy of states' rights and limited federal government intervention.

Option D, stating that Jackson only won by two electoral votes, is also incorrect. In reality, Jackson won the election decisively, securing a significant majority of both the popular vote and the electoral votes.

To learn more about election click here: brainly.com/question/11185151

#SPJ11

: At 6.50 percent interest, how long does it take to double your money? (Enter rounded answer as directed, but do not use rounded numbers in intermediate calculations. Round your answer to 2 decimal places (e.g., 32.16).)

Answers

it takes approximately 11.08 years to double your money at a 6.50 percent interest rate.

To calculate the time it takes to double your money at a given interest rate, you can use the rule of 72. The rule of 72 states that you can approximate the number of years it takes to double your money by dividing 72 by the interest rate.

In this case, with an interest rate of 6.50 percent, we can apply the rule of 72:

Time = 72 / Interest rate

Time = 72 / 6.50 = 11.08 years

Therefore, it takes approximately 11.08 years to double your money at a 6.50 percent interest rate.

To know more about Interest Rate related question visit:

https://brainly.com/question/30393144

#SPJ11

A nutritional poverty trap exists when a household does not have enough calories to work effectively. Draw a diagram that includes both the ""wealth effect"" in nutrition and a nutritional poverty trap. Indicate on the diagram the minimum amount of calories needed to escape the trap and the wealth effect

Answers

Nutritional poverty trap and its effectThe concept of nutritional poverty trap is associated with the continuous cycle of poverty.

It arises when a household does not have enough calories to work effectively and its members are undernourished. This situation causes low productivity and reduced income, leading to decreased caloric intake. This cycle keeps on going and makes the household trapped in nutritional poverty.

A wealth effect in nutrition is a phenomenon that links nutrition to income and economic growth. As a country or an individual's income increases, so does their food consumption. This leads to an increase in the average number of calories consumed. The wealth effect leads to better nutrition and, in turn, better health, leading to better income and economic growth.Both nutritional poverty trap and wealth effect in nutrition can be represented diagrammatically.

The diagram below illustrates both of these concepts: [tex]X[/tex]-axis represents the amount of income or wealth while the [tex]Y[/tex]-axis represents the amount of calories. When the household's income or wealth is low, the household may consume only enough calories to sustain basic activities. As income or wealth increases, the household has the ability to consume more calories.

The minimum amount of calories required to escape the poverty trap is represented by the vertical dotted line. If the household's income or wealth reaches this point, they can consume enough calories to be productive and improve their health.The wealth effect is represented by the upward slope of the graph.

As income or wealth increases, the average number of calories consumed by the household also increases. The nutritional poverty trap is represented by the horizontal part of the curve. It shows that no matter how much the household's income or wealth increases, they still do not consume enough calories to escape poverty. Hence, the nutritional poverty trap is a major obstacle for households with low income, and the solution is to provide them with access to nutritious and affordable food.

To learn more about proverty:

https://brainly.com/question/29519010

#SPJ11

In a discussion with your friend, LeeAnna, you mentioned you have studied Price
Elasticity of Demand (PED) as well as the various costs that impact production.
LeeAnna, who happens to own a Pizza store is worried about the declining
profitability of her store. She needs your advice on what she should do to
increase her profit.
Provide good economic advice to LeeAnna, using the concepts you have learned
from your chapters 1 - 6 (especially paying close attention to PED and
production costs). In your advice, put into consideration the nature of her
competition, what variables impact the profit of an organization, and which of
these variable(s) can the business owner control to increase profit? How can the
PED of a product, in this case, pizza, impact how much price the owner of the
store can change?

Answers

As per the case scenario, Lee Anna, the owner of a Pizza store is concerned about the decreasing profitability of her store. In this situation, she needs economic advice on how she can increase the profit by utilizing the concepts of price elasticity of demand (PED) and production costs.

Let's discuss what Lee Anna can do to increase the profitability of her store, PED can have a significant impact on how much price the owner of the store can change. If the PED is high, the price increase would lead to a significant decrease in the quantity demanded. On the other hand, if the PED is low, the increase in price would lead to a small decrease in the quantity demanded. As a pizza store owner, Lee Anna can take advantage of the concept of PED to increase the price of her products by considering the sensitivity of the customers to the price changes.

To know more about considering refer :

https://brainly.com/question/29753530

#SPJ11

do you think the rf value for the starting alkene will be higher or lower compared to the epoxide product?

Answers

The RF value for the starting alkene will likely be lower compared to the epoxide product.

The retention factor (RF) value is a measure used in chromatography to indicate the relative mobility of a compound compared to the mobile phase. In general, the RF value depends on the polarity and interaction of the compound with the stationary phase.

In the case of an alkene and its epoxide product, the introduction of the epoxide group creates additional polar functionality in the molecule. This increased polarity is likely to enhance the interaction of the epoxide product with the stationary phase in chromatography, resulting in a higher RF value compared to the starting alkene.

The alkene, being less polar and lacking the additional oxygen atom present in the epoxide, may have a lower affinity for the stationary phase and, therefore, a lower RF value. However, it's important to note that the specific RF values can vary depending on the experimental conditions, such as the type of stationary phase and mobile phase used in the chromatographic analysis.

Learn more about chromatography, below:

https://brainly.com/question/29785656

#SPJ11

You and your roommate both enjoy Blue Bunny cookie dough ice cream. At the campus store, you can buy a pint of ice cream for $3. In your last visit to the store, you noticed Blue Bunny ice cream was on sale for 50% off. You are excited about the sale and stock up on pints of ice cream, but to your surprise, your roommate purchases fewer pints of Blue Bunny, opting instead to purchase more of Ben and Jerry’s ice cream. Explain how each decision relates to concepts of income and substitution effects.
a. Because of the decrease in the price of Blue Bunny ice cream, your marginal utility of Blue Bunny per dollar went UP or Down and you bought more of it. This effect on quantity consumed comes from the substitution effect or income effect
b. A decrease in the price of Blue Bunny ice cream makes your roommate feel relatively richer. This is due to the income effect or substitution effect. The fact that your roommate chooses to purchase Ben and Jerry's instead tells us that your roommate views Blue Bunny as a(n) inferior good or normal good

Answers

a. The decrease in the price of Blue Bunny ice cream made your marginal utility of Blue Bunny per dollar go UP. This effect on quantity consumed comes from the substitution effect and b. A decrease in the price of Blue Bunny ice cream makes your roommate feel relatively richer. This is due to the income effect.

a. The decrease in the price of Blue Bunny ice cream made your marginal utility of Blue Bunny per dollar go UP. This effect on quantity consumed comes from the substitution effect.

In economics, the substitution effect is the effect of a change in the price of a good on the quantity of the good demanded, considering the change in purchasing power due to the price change.

The substitution effect implies that when the price of a good decreases, the price ratio between the two goods changes, making the cheaper good more attractive, causing the consumer to purchase more of the cheaper good.

b. A decrease in the price of Blue Bunny ice cream makes your roommate feel relatively richer. This is due to the income effect. The fact that your roommate chooses to purchase Ben and Jerry's instead tells us that your roommate views Blue Bunny as an inferior good.

In economics, the income effect is the change in demand for a good due to a change in income. The income effect occurs when a change in a consumer's income causes a change in the quantity of a good demanded.

When the price of Blue Bunny ice cream decreases, the income effect suggests that the consumer has an increased level of purchasing power, which makes them feel relatively richer.

Since the price of Blue Bunny ice cream decreased and your roommate chooses to purchase Ben and Jerry's instead, Blue Bunny is considered an inferior good.

To know more about marginal visit:

https://brainly.com/question/28481234

#SPJ11

When applying the co-terminated assumption: A study period equal to the minimum common multiple of the lives of the two alternatives is selected and used to evaluate both alternatives Each alternative is evaluated with its own study period which is equal to its life time A study period equal to the average of the life times of both alternatives is selected to be able to compare them with economic equivalence methods O A study period equal to the life of one of the alternatives is selected, and the life of the other alternative is adjusted to the same study period

Answers

When applying the co-terminated assumption, the correct option is: B) Each alternative is evaluated with its own study period which is equal to its lifetime.

The co-terminated assumption assumes that each alternative being evaluated has its own specific study period equal to its expected lifetime. This means that the analysis for each alternative is conducted over a period of time that corresponds to the projected lifespan of that alternative.

By using the co-terminated assumption, the evaluation can capture the full economic impact of each alternative over its entire lifespan. This allows for a fair comparison between the alternatives based on their individual costs, benefits, and cash flows.

It is important to note that using different study periods for each alternative allows for a more accurate assessment of their economic performance and facilitates decision-making based on the unique characteristics and lifespan of each option.

Learn more about assumption here

https://brainly.com/question/4636114

#SPJ11

what might a decrease in sales of new cars indicate about the state of the economy? what would it not necessarily indicate?

Answers

A decrease in sales of new cars can indicate a slowdown or weakness in the state of the economy.

It suggests that consumers are less confident in making large purchases, which can be a sign of reduced disposable income or concerns about future economic stability. However, a decrease in car sales does not necessarily indicate the overall health of the economy. It could also be influenced by factors specific to the automotive industry, such as changes in consumer preferences, availability of alternative transportation options, or supply chain disruptions impacting the production and delivery of vehicles.

Economic stability refers to a state in which an economy experiences steady and predictable growth, low inflation, low unemployment rates, and a stable financial system. It is characterized by an absence of extreme fluctuations or shocks that can disrupt economic activities and cause uncertainties.

To learn more about economic stability, click here:

brainly.com/question/1315045

#SPJ11

Ariba Corporation recently organized. The company issued common stock to an inventor in exchange for a patent with a market value of $55,000. In addition, Ariba received cash for 8,000 shares of its $15 par preferred stock at par value and 9,000 shares of its no-par common stock at $30 per share. Without making journal entries, determine the total paid-in capital created by these transactions. . The total paid-in capital created by these transactions amounts to

Answers

The total paid-in capital created by the transactions described in the scenario can be determined by adding up the amounts received for each type of stock issued.

In this case, Ariba Corporation issued preferred stock at par value and no-par common stock at a specific price per share. The total paid-in capital is the sum of the amounts received for each type of stock issued.

To calculate the total paid-in capital, we need to consider the amounts received for each type of stock issued. Ariba Corporation received cash for 8,000 shares of its $15 par preferred stock at par value, which amounts to $120,000 (8,000 shares x $15 par value). Additionally, they received cash for 9,000 shares of its no-par common stock at $30 per share, totaling $270,000 (9,000 shares x $30).

Therefore, the total paid-in capital created by these transactions is $120,000 + $270,000, which equals $390,000.

learn more about stock click here;

https://brainly.com/question/31940696

#SPJ11

The U.S. market for computers is dominated by domestic firms such as Dell, Hewlett-Packard, and Apple. The U.S. market for consumer electronics is dominated by Japanese firms and brands such as Sony, JVC, Panasonic, Mitsubishi, and Toshiba. However, the U.S. automobile market includes both domestic firms like Ford and General Motors and formidable Japanese competitors like Toyota and Honda. Please discuss the following two questions:


1. Do some theories work better than others for different industries? Why?

2. What other industries can you think of that fit one of the three patterns noted in the chapter (dominated by foreign firms, dominated by U.S. firms, or dominated by a combination of U.S. and non-U.S. firms)?

Answers

Different industries may be better explained by different theories due to various factors such as market dynamics, cultural influences, technological advancements, and competitive landscapes. The dominance of domestic firms in the U.S. computer market and foreign firms in the U.S. consumer electronics market suggests that industry-specific factors play a significant role in shaping market dynamics.

Theories of international business and market dominance may work differently for various industries due to the unique characteristics and dynamics of each industry. In the case of the U.S. computer market, theories like the Diamond Model by Michael Porter, which emphasizes factors such as factor conditions, demand conditions, related and supporting industries, and firm strategy, may be more applicable. Domestic firms like Dell, Hewlett-Packard, and Apple have established a strong presence in this market by leveraging technological expertise, brand recognition, and competitive pricing.

On the other hand, the dominance of Japanese firms in the U.S. consumer electronics market may be attributed to factors such as innovation, quality, and cultural preferences. Japanese firms like Sony, JVC, Panasonic, Mitsubishi, and Toshiba have a long-standing reputation for producing high-quality consumer electronics, and their success can be attributed to their ability to innovate and meet the specific needs and preferences of the U.S. market.

Regarding the second question, other industries that fit the patterns noted in the chapter include:

- Dominated by foreign firms: The global smartphone market is dominated by foreign firms such as Samsung (South Korea), Apple (United States), Huawei (China), and Xiaomi (China). These companies have expanded their reach and gained market share in various countries worldwide.

- Dominated by U.S. firms: The fast-food industry is largely dominated by U.S. firms such as McDonald's, Burger King, and Subway, which have successfully expanded their operations globally and established a strong presence in many countries.

- Dominated by a combination of U.S. and non-U.S. firms: The pharmaceutical industry represents a combination of U.S. and non-U.S. firms. While there are major U.S. pharmaceutical companies like Pfizer and Johnson & Johnson, there are also prominent non-U.S. companies like Novartis (Switzerland) and Roche (Switzerland) that have a significant presence in the global pharmaceutical market.

Learn more about Toshiba  : brainly.com/question/28507576

#SPJ11

The three best indicators of how well a company's present strategy is working are whether Copyright by Glo-Bus Software, Inc. Copying, distributing, or 3rd party website postog isexpressly prohibited and constitutes copyright violation the company has attractive market opportunities, enjoys a sustainable competitive advantage, and charges a lower price than rival firms the company is achieving its stated financial and strategic objectives, is an above-average industry performer, and is gaining customers and market share. Oit is charging a lower price than rivals, has bigger profit margins than rival firms, and has the biggest market share in the industry. Obuyers view the company as having a quality product, whether the company has costs that are comparable to or below those of its close rivals, and whether the company's product offering is highly differentiated from those offered by its rivals. the company is growing rapidly, has an above-average market share, and has bigger profit margins per unit sold than its rivals.
Previous question

Answers

The three best indicators of how well a company's present strategy is working are whether the company has attractive market opportunities, enjoys a sustainable competitive advantage, and charges a lower price than rival firms.

Additionally, the company's achievement of stated financial and strategic objectives, being an above-average industry performer, and gaining customers and market share are important indicators. Lastly, buyers' perception of the company as having a quality product, cost competitiveness compared to rivals, and differentiation in product offering are key factors to consider.

These indicators reflect different aspects of a company's performance and competitiveness. The presence of attractive market opportunities indicates that the company has identified and capitalized on potential areas for growth and profitability. A sustainable competitive advantage signifies that the company possesses unique resources, capabilities, or market positioning that give it a long-term advantage over competitors. Charging a lower price than rival firms can be an indicator of cost efficiency and competitiveness in the market.

Achieving financial and strategic objectives demonstrates that the company is effectively executing its strategy and generating desired outcomes. Being an above-average industry performer and gaining customers and market share show that the company is outperforming competitors and expanding its presence in the market.

Buyers' perception of a quality product reflects customer satisfaction and loyalty. Cost competitiveness and differentiation from rivals contribute to the company's ability to attract customers and maintain a competitive edge.

By assessing these indicators, companies can evaluate the effectiveness of their present strategy and make necessary adjustments to drive future success. It is important to consider multiple dimensions of performance to gain a comprehensive understanding of the company's strategic position and market competitiveness.

Learn more about strategy here: brainly.com/question/31930552

#SPJ11

TRUE FALSE An unfavourable variance is always journalized as a credit.
2) TRUE FALSE A favourable variance is always journalized as a credit.
3) TRUE FALSE The materials price variance is always based on the quantity of materials used.
4) TRUE FALSE In journalizing the materials efficiency variance, the account Work-In-Process is debited for the standard input allowed for actual output X actual price.
5) TRUE FALSE Flexible Budget can be defined as, standard input allowed for actual output X standard price.

Answers

1).False, An unfavourable variance is always journalized as a debit, not a credit.

2) False, A favourable variance is always journalized as a debit, not a credit.

3) False, The materials price variance is always based on the quantity of materials purchased.

4) False, In journalizing the materials efficiency variance, the account Work-In-Process is debited for the standard input allowed for actual output X standard price.

5) False, The formula for a flexible budget is Actual Output x Standard Price per unit of output for flexible budget.

to know more about unfavourable visit:

https://brainly.com/question/29592920

#SPJ11

In a market for car insurance, which of the following are examples of statistical discrimination? Instructions: In order to receive full credit, you must make a selection for each option. For correct answer(s), click the option once to place a check mark. For incorrect answer(s), click the option twice to empty the box. Premiums are adjusted based on the zip code of the insured. Premiums are adjusted based on the color of the car. ?Premiums are adjusted based on the driving record of the insured. ? Premiums are adjusted based on the model of the car.

Answers

The following are the examples of statistical discrimination in a market for car insurance:Premiums are adjusted based on the zip code of the insured.Premiums are adjusted based on the driving record of the insured.Long AnswerIn a market for car insurance, statistical discrimination happens.

when the insurance companies use demographic information, like age, gender, and location to set car insurance rates, instead of the driving record of the policyholder. Statistical discrimination is deemed inappropriate as it is unrelated to the policyholder's risk, violates anti-discrimination laws, and unfairly penalizes people.A statistical discrimination is determined by grouping people together into categories or groups, based on data and statistical analyses. Some characteristics can be included, like age, location, and gender.

Car insurance companies utilize such groupings to evaluate car insurance rates for individuals in particular categories, such as age groups or regions.Insurance firms are allowed to use demographics to help decide the rates. However, it should not be the sole basis for their decision. When insurance firms decide rates based on arbitrary criteria, it is referred to as statistical discrimination. In a market for car insurance, statistical discrimination includes adjusting premiums based on zip code of the insured or driving record of the insured. ExplanationStatistical discrimination is the act of dividing people into groups based on their demographic or other characteristics. Car insurance firms may use statistical analyses to assess risks and adjust rates accordingly. However, insurers must ensure that their evaluation of risk and rate-setting does not breach anti-discrimination legislation or harm particular groups of individuals. Car insurance rates should be evaluated using the policyholder's driving record and accident history, as well as vehicle specifics and other applicable criteria.

To know more about statistical visit:

https://brainly.com/question/32201536

#SPJ11

1. Identify some behaviors you see in employees in your current
job (positive and negative)
2. Discuss and explain what you think the causes of the
behaviors may be (individual, group, organizational)

Answers

As an AI language model, I don't have any current job to be able to identify behaviors of employees, but I can give you some examples of positive and negative behaviors that can occur in the workplace.

Positive Behaviors: Timeliness: Employees who show up to work on time and meet deadlines show respect for their job and their colleagues. This behavior indicates reliability and dependability.

Commitment: Employees who work consistently and effectively, meet targets, take ownership, and show interest in the company's progress demonstrate commitment and dedication to their job.

Teamwork: Employees who communicate and work collaboratively with their colleagues contribute positively to a supportive work environment. The sharing of knowledge, ideas, and information ensures the success of the organization.

Negative Behaviors: Procrastination: Employees who postpone tasks until the last minute or miss deadlines may cause serious problems for the company. This behavior shows laziness and lack of commitment. Poor communication: Poor communication can cause confusion, mistakes, and misunderstandings that can negatively impact the company. Employees who fail to communicate effectively with their colleagues or managers may not achieve their objectives or solve problems effectively.

Absenteeism: Employees who take excessive sick days or show up to work late regularly can harm the company's productivity and cause disruptions. It may also indicate a lack of engagement, motivation, or loyalty. Causes of Behaviors: Individual factors: Attitudes, values, personality, personal goals, and interests all affect behavior. For example, someone who values teamwork is more likely to work collaboratively with others.

Organizational factors: The company's culture, leadership, policies, and structure can influence employee behavior.

For instance, a company that values innovation will encourage employees to be creative. Group dynamics: The behavior of colleagues, team members, or supervisors can also affect the employee's behavior.

For instance, peer pressure can influence an employee to adopt certain behaviors or attitudes to fit in or avoid conflicts.

To know more about  negative behaviors visit:

https://brainly.com/question/30228525

#SPJ11

after determining the physical flow of units, the next step in process costing is:

Answers

He next step in process costing after determining the physical flow of units is to calculate the equivalent units of production. Process costing is a cost accounting technique that is used in manufacturing operations to determine the cost of producing a product.

Process costing involves the tracking of direct materials, direct labor, and manufacturing overhead costs incurred in producing a product. Process costing is used in industries such as chemical, pharmaceutical, and food processing, where products are produced in large quantities.Process costing is done in five steps, which are:1. Determine the physical flow of units: The first step in process costing is to identify how many units were started, completed, and how many are in progress in the production process.

Calculate the equivalent units of production: The next step in process costing after determining the physical flow of units is to calculate the equivalent units of production. Equivalent units of production refer to the number of units that could have been completed given the resources used.3. Calculate the cost per equivalent unit: The third step in process costing is to calculate the cost per equivalent unit. The cost per equivalent unit is calculated by adding the total cost of production and dividing it by the equivalent units of production.4. Allocate the total costs: The fourth step in process costing is to allocate the total costs to the completed and in-progress units.5. Prepare a cost reconciliation report: The final step in process costing is to prepare a cost reconciliation report that shows the cost per equivalent unit, total costs, and how the costs were allocated.EXPLANATIONThe next step in process costing after determining the physical flow of units is to calculate the equivalent units of production. The equivalent units of production refer to the number of units that could have been completed given the resources used. The equivalent units of production are calculated by adding the total units completed to the equivalent units of in-process inventory. This step is necessary to convert partially completed units to a finished product that can be accounted for under process costing. The equivalent units of production are then used to calculate the cost per equivalent unit, which is the next step in process costing.

To know more about determining visit:

https://brainly.com/question/29898039

#SPJ11

Consider a market with the inverse demand function P(q) = a − bq, where a and b are positive constants. The cost function of the firm under consideration is C(q) = cq where 0

Answers

In the given market scenario, where the inverse demand function is P(q) = a - bq and the cost function is C(q) = cq (where c > 0), we need to determine the optimal level of output and price for the firm.

To find the optimal output level, we can set the marginal cost (MC) equal to the marginal revenue (MR), as profit maximization occurs when these two are equal.

The marginal cost is the derivative of the cost function, which is MC(q) = c. The marginal revenue can be calculated using the inverse demand function: MR(q) = P(q) + q * dP/dq. Taking the derivative of the inverse demand function, we have dP/dq = -b. Substituting these values into the marginal revenue equation, we get MR(q) = a - bq - bq = a - 2bq.

Now, equating MC and MR, we have c = a - 2bq. Solving for q, we find q = (a - c) / (2b).

To determine the price, we substitute the optimal output level into the inverse demand function: P(q) = a - bq. Thus, the price is P = a - b * ((a - c) / (2b)). Simplifying, we get P = (2a + c) / 2.

The optimal output level for the firm is q = (a - c) / (2b), and the corresponding price is P = (2a + c) / 2.

To know more about cost, visit

https://brainly.com/question/28147009

#SPJ11

Thurston Petroleum is considering a new project that complements its existing business The machine required for the project costs $4.5 million. The marketing department predicts that sales related to the project will be $2.67 million per year for the next four years, after which the market will cease to exist. The machine will be depreciated to zerc over its 4-year economic life using the straight-line method. Cost of goods sold and operating expenses related to the project are predicted to be 30 percent of sales. The company also needs to add net working capital of $190,000 immediately. The additional net working capital will be recovered in full at the end of the project's life. The tax rate is 23 percent and the required return for the project is 13 percent. What is the value of the NPV for this project? (Do not round intermediate calculations and enter your answer in dollars, not millions of dollars, rounded to 2 decimal places, e.g., 1,234,567.89.) NPV Should the company proceed with the project? O Yes O No

Answers

The value of the NPV for this project is $280,018.80.

To calculate the NPV, we need to determine the cash flows associated with the project and discount them back to the present value using the required return rate.

Initial cash flow: The machine cost of $4.5 million and the net working capital of $190,000 represent the initial cash outflow.

Annual cash flows: The annual sales of $2.67 million, with cost of goods sold and operating expenses being 30% of sales, give us the annual cash inflows. We need to calculate the after-tax cash flows by considering the tax rate of 23%.

Terminal cash flow: At the end of the project's life, the net working capital of $190,000 is recovered in full.

Using the above information, we can calculate the cash flows for each year and discount them to their present value using the required return rate of 13%. After discounting, we sum up all the present values to calculate the NPV.

Based on the calculations, the NPV is positive at $280,018.80.

Therefore, since the NPV is positive, the company should proceed with the project.

To know more about cash flows visit:

https://brainly.com/question/30066211

#SPJ11

The Crash Davis Driving School has an ROE of 15.3 percent and a payout ratio of 52 percent.
What is its sustainable growth rate?

Answers

Sustainable Growth Rate (SGR) is the maximum rate at which a company can expand while still maintaining its current financial policies. It is calculated by multiplying the retention rate by the Return on Equity (ROE) of the company.

The Crash Davis Driving School has an ROE of 15.3% and a payout ratio of 52%.Let's calculate the sustainable growth rate using the formula:Sustainable Growth Rate = Retention rate * Return on EquityRetention Rate = 1 - Payout ratio= 1 - 0.52= 0.48SGR = 0.48 * 15.3% = 7.34%Therefore, the sustainable growth rate for the Crash Davis Driving School is 7.34%. The company can expand at a maximum rate of 7.34% without changing its current financial policies.

To know more about Sustainable Growth Rate visit :-

https://brainly.com/question/5452967

#SPJ11

The beginning balance in retained earnings of is $1200,000 (Cr.). The current period net loss is $350,000 and declared stock dividends $150,000. The ending balance in retained earnings equals O A. Credit of $700,000. O B. Credit of $850,000. OC. Credit of $1400,000. OD. Credit of $1550,000.

Answers

To calculate the ending balance in retained earnings, we need to consider the beginning balance, net loss, and stock dividends.

Beginning balance in retained earnings: $1,200,000 (Cr.)

Net loss for the current period: $350,000

Declared stock dividends: $150,000

We can calculate the ending balance by subtracting the net loss and adding back the stock dividends to the beginning balance:

Ending balance = Beginning balance - Net loss + Stock dividends

Ending balance = $1,200,000 - $350,000 + $150,000

Ending balance = $1,000,000

However, the question asks for the ending balance in terms of its credit or debit nature. Since the beginning balance is given as a credit of $1,200,000, and the net loss and stock dividends decrease retained earnings, which are normally credited, the ending balance will also be a credit.

Therefore, the correct answer is: (b) Credit of $850,000.

To know more about ending balance, please visit

https://brainly.com/question/28580073

#SPJ11

what is the ""agency problem"" often discussed in corporate governance?

Answers

The Agency Problem, In finance, the agency problem refers to a dispute of interest between corporate managers and their shareholders that may happen due to a variety of reasons.

Managers may prioritize their self-interests over the company's financial goals, and shareholders may have little control over their actions. Corporate governance is an essential component in mitigating this agency issue. Corporate governance encompasses a range of procedures and rules that regulate how businesses are run and monitored, as well as how information is disseminated to shareholders and stakeholders.

To know more about business refer :

https://brainly.com/question/13724491

#SPJ11

Other Questions
You realize that there is currently a 4% GDP gap in economy A. According to Okun's Law, this means that Economy A is experiencing a 2% cyclical unemployment O 4% cyclical unemployment O 6% cyclical Unemployment O 8% Cyclical Unemployment what would be a car's mpg at average values of the inputs? (upto two decimal points) The equilibrium constant of a reaction requires certain environmental variables to remain constant. These variables are _____.pressure, temperature, and concentrationtemperature and concentrationpressure, temperature, and timeNone of the above. Compute the IRR for the following project cash flows:a. An initial outlay of $3,669,530 followed by annual cash flows of $662,990 for the next eight years. (Round final answer to 2 decimal places, e.g. 15.25%.)IRR of the project is %.b. An initial investment of $28,202 followed by annual cash flows of $7,470 for the next five years. (Round final answer to 2 decimal places, e.g. 15.25%.)IRR of the project is%c. An initial outlay of $8,943 followed by annual cash flows of $2,280 for the next seven years. (Round final answer to 2 decimal places, e.g. 15.25%.)IRR of the project is% Describe some of the astronomical images. effects/difficulties we have to consider when making 12pt A Edit View Insert Format Tools Table Paragraph B IUA 2 T v V : What is the significance of sunspots? What other Solar phenomena are they related to and how What type of inventory system (i.e., single-period, fixed-order quantity, and fixed-time period) would you use in the following situations, respectively? Provide your reasons. a. Buying gas for your car b. Supplying your kitchen with food How did Pontiacs war end Assume XYZ Corp.s dividend payment will be $2.55 one year from now, $3.10 two years from now, and $3.61 three years from now. Further assume that after these three years, the dividend will grow by 5.5% each year. If the required rate of return for the industry XYZ Corp. belongs to is 10.6%, what is the market value of XYZ Corp.s stock under the Dividend Discount Model? Group of answer choicesa.$62.71b.$74.69c.$78.29d.$57.87 Let S 1,4,8,16,32,64) be a sample space. If P(1) 32 P(2k) = 21 kfor 2 < k < 6, E (1,8,32,64 and find the expected value of the event Give your answer as a fraction in its simplest form. Provide your answer below: II. Assume the inverse demand for gas in the north of a country is Dn(qn) = 700 qn while in the south the inverse demand function is Ds (qs ) = 710 3qS . There is only one brand of gas stations that has a constant marginal cost c = 100 and operates in both parts of the country (q is measured in gallons and p in cents).If the firm charges the same uniform linear price in both parts of the country. Write the problem of the firm. What would be the equilibrium quantities qN and qS.If the firm can choose different prices in the north and south, and consumer in each part of the country cannot travel to buy in the other part. Write the problem of the firm. What would be the equilibrium quantities qN and qS, and prices pN and pS?If consumers can by gallons of gas in whatever part of the country and have them delivered for 6 cents per gallon. Would the firm alter the prices found on (2)? What if the shipping cost is just 4 cents per gallon? "1.Which of the following is the maximum interest a person canhold in real property?a. Life Estateb. Nonfreehold Estatec. Tenancy be the Entiretyd. Fee Simple When the selling price of treasury shares is greater than its cost, the company credits the difference toa.Gain on Sale of Treasury Shares.b.Share PremiumTreasury.c.Treasury Shares. FSK9027 is being investigates in clinical trials for its ability to increase cardiac contractile force. this drug could work by _____. which 3 have been cited as long term advantages of electronic health records (EHRs)?A. Ehr involves low upfront cost of acquisition and implementation.B Physucians/providers experience burnout due to more time spent on documentationC Organizational outcomes include financial and operational benefits, such as workflow.D Privacy and security issues do not occur in electronic records, but instead only in paper medical records. EHR involves low upfront cost of acquisition and implementationE Societal outcomes improve, such as improved ability to conduct research and improved population health. when you open a bottle of a soft drink and leave it open, the drink eventually goes flat. this happens because the equilibrium between carbonic acid (h2co3) and carbon dioxide (co2) shifts to produce Abigail inherited a sum of $205000. She invested all of the money at 4.1% per annum, compounded semiannually. With this invested money, she would like to withdraw a payment every six months, for the next 10 years. How much will each payment be? (1 point) The manufacturer of cans of salmon that are supposed to have a net weight of 6 ounces tells you that the net weight is actually a normal random variable with a mean of 6.02 ounces and a standard deviation of 0.1 ounce. Suppose that you draw a random sample of 25 cans. Find the probability that the mean weight of the sample is less than 6 ounces. Probability = Question Determine the area under the standard normal curve that lies to the right of the z-score 0.48 and to the left of the x-score 0.79. Z 0.09 0.6879 0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0 For a data set of chest sizes (distance around chest in inches) and weights (pounds) of ten anesthetized bears that were measured, the linear correlation coefficient is r=0.662 Use the table available below to find the critical values of r Number of Pairs 4 of Data n Critical Value of r 4 0.950 5 0.878 0.811 0.754 0.707 0.666 0.632 0.602 0.576 6 7 8 9 10 11 12 OA 0.632, +0 632 OB +0.632 C+0.666 O 0-0,632 Suppose Cocomelon Umbrellas can sell 60,000 units at $10 each;50,000 units at $11; and 40,000 units at $13,which of these sale prices should the company pick? Why?