Simplify each trigonometric expression. cscθ cos θ tanθ

If m∠BCD = 64 degrees and quadrilateral ABCD is a rhombus, then m∠BAC is also 64 degrees.

In a rhombus, opposite angles are congruent. Therefore, ∠BCD and ∠BAC are opposite angles in the rhombus ABCD. Since we are given that m∠BCD = 64 degrees, we can conclude that m∠BAC must also be 64 degrees.

This is because in a rhombus, the opposite angles are equal, meaning they have the same measure. Therefore, if one of the opposite angles measures 64 degrees, the other opposite angle must also measure 64 degrees. Thus, m∠BAC = 64 degrees. Hence, based on the given information and the properties of a rhombus, we can determine that the measure of ∠BAC is 64 degrees.

Learn more about congruent here: brainly.com/question/30596171

#SPJ11

The solutions to 9x² + 4 = 0 are imaginary, there are no real solutions.

To find the solutions to the equation 9x² + 4 = 0, we need to solve for x. However, when we attempt to solve this equation using traditional methods such as factoring or isolating the variable, we encounter a problem. The equation has no real solutions because there are no real numbers that can be squared to give a negative value.

We can see this by attempting to solve the equation:

9x² + 4 = 0

Subtracting 4 from both sides:

9x² = -4

Dividing by 9:

x² = -4/9Taking the square root of both sides:

x = ±√(-4/9)

Here, we encounter the issue of taking the square root of a negative number. The square root of a negative number is not a real number, but rather an imaginary number. In this case, the solutions to the equation are ±√(-4/9), which can be written as ±(2/3)i, where i is the imaginary unit.

Therefore, the correct answer is not provided among the options listed. The solutions to the equation 9x² + 4 = 0 are imaginary, there are no real solutions.

Learn more about no real solutions here:

/brainly.com/question/33649707

#SPJ11

A total of 2 triangles can be formed after the given modifications to "a"

Firstly, Between the red and the black marks, make another separate blue mark. After that, Now, spin the strip and use the new length for "a", to try to make a triangle (or triangles). We'll see that by doing this, two triangles can be formed.

We know the triangle's area = [tex]\frac{1}{2}[/tex]× base × height.

Here from the given data, we can say the height is b sinA and the base is a.

∴ Area =  [tex]\frac{1}{2}[/tex]× a × b sin A

So, the total area of two triangles is, the area

=  [tex]\frac{1}{2}[/tex] × a × b sin A +  [tex]\frac{1}{2}[/tex] × a × b sin A= ab sin A

Hence, we can say two triangles are formed given the modifications to "a", in Activity 1 . and the total area is ab sin A.

Read more about modifications,

https://brainly.com/question/11961976

The complete question is, "Determine the number of triangles that can be formed given the modifications to "a" in Activity 1 ab sin A (Hint: Make a blue mark between the black and the red marks. Then rotate the strip to try to form triangle(s) using this new length for 'a' .)"

#SPJ4

To measure the quality characteristics of an organization, one statistical technique that can be employed is Statistical Process Control (SPC).

SPC is a method used to monitor and control processes to ensure they are operating within predetermined limits. It involves the use of control charts to analyze process data and identify any variations that may occur.

SPC provides a visual representation of process performance over time, allowing organizations to identify and address any issues that may affect quality. Control charts, such as the X-bar and R charts or the X-bar and S charts, are commonly used in SPC to monitor the mean and variability of a process.

For example, let's say a manufacturing company wants to measure the quality characteristics of its production line. The company can collect data on key quality indicators, such as product dimensions or defects, at regular intervals. Using SPC, the company can create control charts to track these measurements over time. If the data points fall within the control limits, it indicates that the process is stable and in control. However, if there are any data points outside the control limits or any patterns or trends observed, it may indicate a problem that requires investigation and corrective action.

To know more about Statistical Process Control (SPC), refer here:

https://brainly.com/question/32406711#

#SPJ11

We must combine the numerators and denominators together in order to find the product of rational expressions. Here are the facts: The correct option is B

What is rational expressions?

(2/(2x + 3)) * (9/x)

The product of the numerators is 2 * 9 = 18.

The product of the denominators is (2x + 3) * x = 2x^2 + 3x.

Therefore, the product of the rational expressions is:

[tex]18 / (2x^2 + 3x)[/tex]

Learn more about rational expression here

/brainly.com/question/29061047

#SPJ1

The expression 5¹/₂ . 5¹/₂ simplifies to 25¹/₄, which means the result is 25 and one-fourth.

In the expression 5¹/₂ . 5¹/₂, both numbers are whole numbers with fractions.

First, we multiply the whole numbers, which gives us 5 * 5 = 25. Then, we simplify the fraction part. Multiplying the fractions, we have ¹/₂ * ¹/₂ = ¹/₄.

Combining the whole number and fraction, we get 25¹/₄. The fraction ¹/₄ cannot be further simplified since the numerator (1) and the denominator (4) have no common factors other than 1.

Therefore, the final simplified expression is 25¹/₄. This means that 5¹/₂ . 5¹/₂ is equal to 25¹/₄ or 25 and one-fourth.

Learn more about Expressions click here :brainly.com/question/24734894

#SPJ11

If only two out of the five people show up for the meeting, it is possible in 10 different ways.

If five people plan to meet after school and there will be one group of five people if they all show up, but only two people show up, we need to determine the number of ways this can happen.

To find the number of ways two people can show up out of the five, we can use combinations. In a combination, the order of selection does not matter.

The number of ways to choose two people out of five can be calculated using the formula for combinations, denoted as "nCr", where n is the total number of people and r is the number of people we want to choose.

In this case, we want to choose 2 people out of 5, so the calculation would be:

5C2 = (5!)/(2!(5-2)!) = (5!)/(2!3!) = (5 [tex]\times[/tex] 4)/(2 [tex]\times[/tex] 1) = 10

Therefore, there are 10 possible ways for two people to show up out of the five if all of them plan to meet after school.

These 10 possibilities could be different combinations of any two individuals out of the five.

To determine the specific combinations, you can list all the pairs or use a combination formula calculator.

It's important to note that the order in which the two people show up does not matter, as long as they are two out of the five originally planning to meet.

For similar question on combinations.

https://brainly.com/question/4658834  

#SPJ8

Answer:

(1/2, -1/2)

Step-by-step explanation:

Solving the given system of equations using elimination.

(1) - Write down the system of equations.

[tex]\left\{\begin{array}{c}\dfrac{1}{2}x-\dfrac{1}{3}y=\dfrac{5}{12}\\\\\dfrac{5}{6}x+\dfrac{1}{2}y=\dfrac{1}{6}\end{array}\right[/tex]

(2) - Choose one variable to eliminate by multiplying one or both equations by appropriate constants. The goal is to make the coefficients of one variable in both equations equal or multiples of each other.

Let's eliminate the "y" variable in this example. Multiply Equation 1 by 3/2:

[tex]\Longrightarrow \left\{\begin{array}{c}\dfrac{3}{2} \cdot\Big[\dfrac{1}{2}x-\dfrac{1}{3}y=\dfrac{5}{12}\Big]\\\\\dfrac{5}{6}x+\dfrac{1}{2}y=\dfrac{1}{6}\end{array}\right\\\\\\\\\Longrightarrow \left\{\begin{array}{c}\Big(\dfrac{3}{2} \cdot \dfrac{1}{2}\Big)x-}\Big(\dfrac{3}{2} \cdot \dfrac{1}{3}\Big)y=}\dfrac{3}{2} \cdot \dfrac{5}{12}\\\\\dfrac{5}{6}x+\dfrac{1}{2}y=\dfrac{1}{6}\end{array}\right[/tex]

[tex]\Longrightarrow\left\{\begin{array}{c}\dfrac{3}{4}x-\dfrac{1}{2}y=\dfrac{5}{8}\\\\\dfrac{5}{6}x+\dfrac{1}{2}y=\dfrac{1}{6}\end{array}\right[/tex]

(3) - Add or subtract the modified equations to eliminate the chosen variable.

In this case, we'll add equations 1 and 2:

[tex]\Big[\dfrac{3}{4}x-\dfrac{1}{2}y=\dfrac{5}{8}\Big]+ \Big[\dfrac{5}{6}x+\dfrac{1}{2}y=\dfrac{1}{6} \Big] = \Big(\dfrac{3}{4}x+\dfrac{5}{6}x\Big)+\Big(-\dfrac{1}{2}y+\dfrac{1}{2}y\Big)=\Big(\dfrac{5}{8}+\dfrac{1}{6}\Big)\\\\\\\Longrightarrow \dfrac{19}{12}x=\dfrac{19}{24}[/tex]

(4) - Solve the resulting equation for the remaining variable.

In this case, solve for "x":

[tex]\dfrac{19}{12}x=\dfrac{19}{24}\\\\\\\Longrightarrow x=\dfrac{19}{24} \cdot \dfrac{12}{19}\\\\\\\Longrightarrow x=\dfrac{228}{456}\\\\\\\therefore \boxed{x=\frac{1}{2} }[/tex]

(5) - Substitute the value of "x" back into one of the original equations and solve for the remaining variable.

Let's use Equation 1:

[tex]\dfrac{1}{2}x-\dfrac{1}{3}y=\dfrac{5}{12}; \ x=\dfrac12\\\\\\\Longrightarrow \dfrac{1}{2}\Big(\dfrac{1}{2}\Big)-\dfrac{1}{3}y=\dfrac{5}{12}\\\\\\\Longrightarrow \dfrac{1}{4}\Big-\dfrac{1}{3}y=\dfrac{5}{12}\\\\\\\Longrightarrow -\dfrac{1}{3}y=\dfrac{5}{12}-\dfrac{1}{4} \\\\\\\Longrightarrow -\dfrac{1}{3}y=\dfrac{1}{6}\\\\\\\Longrightarrow y=\dfrac{1}{6} \cdot -3\\\\\\\therefore \boxed{y=-\dfrac12}[/tex]

Therefore the solution to the system is (1/2, -1/2).

In order to determine if triangles ΔABC and ΔA''B''C'' are congruent, we need additional information or conditions to compare the corresponding sides and angles of the two triangles. Without any specific information provided, it is not possible to definitively state whether the triangles are congruent or not.

Congruence of triangles requires the corresponding angles and sides of the two triangles to be equal. This can be proven using various methods such as the Side-Angle-Side (SAS), Angle-Side-Angle (ASA), or Side-Side-Side (SSS) congruence criteria. Without any information about the angles or side lengths of the triangles, it is impossible to apply these criteria and determine their congruence. Therefore, based on the given information alone (Activity 1), we cannot determine whether triangles ΔABC and ΔA''B''C'' are congruent or not.

Learn more about Congruence of triangles here: brainly.com/question/29069614

#SPJ11

The solution to the equation -4 - p = -2 is p = -2.

To solve the equation -4 - p = -2, we can isolate the variable p by performing the following steps:

1. Add 4 to both sides of the equation to eliminate the negative coefficient of -4:

  -4 - p + 4 = -2 + 4

  Simplifying the equation gives:

  -p = 2

2. To isolate p, multiply both sides of the equation by -1 to change the sign of -p:

  -1 * (-p) = -1 * 2

  This results in:

  p = -2

Therefore, the solution to the equation -4 - p = -2 is p = -2.

Visit here to learn more about negative coefficient brainly.com/question/28801135

#SPJ11

Isaac will get approximately 9.46 quetzals for his 100 reais.

Given:

Spot rate on the GTQ/₡ cross rate: GTQ 10.5799 = ₡1.00

To find the Brazilian reais/Guatemalan quetzal cross rate:

GTQ/R$ = 1 / (GTQ/₡)

GTQ/R$ = 1 / 10.5799

GTQ/R$ = 0.09461

Therefore, the Brazilian reais/Guatemalan quetzal cross rate is approximately 0.0946.

To calculate how many quetzals Isaac will get for his reais, we need to multiply the number of reais by the cross rate.

Let's assume Isaac has 100 reais:

Quetzals = Reais * GTQ/R$

Quetzals = 100 * 0.0946

Quetzals = 9.46

Learn more about Spot rate here:

https://brainly.com/question/32530463

#SPJ11

Without any additional information about the lines or angles involved, it is not possible to determine if any lines are parallel based solely on the given information that ∠7 is congruent to ∠11 (represented as ∠7 ≅ ∠11).

The congruence of angles does not provide direct information about the parallelism of lines.

To determine if lines are parallel, additional information such as the relationships between specific angles and the lines they intersect would be necessary. Postulates and theorems related to parallel lines and angles, such as the corresponding angles postulate, alternate interior angles theorem, or consecutive interior angles theorem, would need to be considered.

Visit here to learn more about consecutive interior angles theorem brainly.com/question/21976320

#SPJ11

The pirate game involves proposing coin divisions, voting on proposals, and executing unsuccessful proposers. Tie votes give the strongest pirate an extra vote.

Pirate A proposes a division of coins, and all pirates vote on whether to accept it. If the proposal gets a majority vote, it is accepted and the game ends. If the proposal fails to get a majority vote, Pirate A is executed, and Pirate B gets a turn to propose a division.

The same rules apply, except that if there is a tie vote, the strongest remaining pirate gets an additional vote to break the tie.

The game involves a strategic decision-making process among the pirates, as each pirate wants to maximize their share of the coins while avoiding being executed. Pirate A must carefully consider their proposal to gain majority support. If they fail to do so, Pirate B has an opportunity to propose a more favorable division.

The presence of a tie-breaker vote for the strongest pirate adds an extra layer of complexity, as it can influence the outcome and potentially affect the division of coins. Ultimately, the game is a test of negotiation skills, strategic thinking, and alliances among the pirates in order to reach a favorable outcome for themselves.

Learn more about division here:

https://brainly.com/question/28598725

#SPJ11

To cover a 100 ft * 82 ft ceiling with gold leaf that is five-millionths of an inch thick, the amount of gold need is approximately 60.135 troy ounces, costing approximately $99,481.59.

To find the amount of gold needed, we can start by calculating the area of the ceiling. The area of a rectangle is found by multiplying its length by its width. In this case, the length is 100 ft and the width is 82 ft, so the area of the ceiling is 100 ft * 82 ft = 8,200 sq ft.

Next, we need to convert the area from square feet to square inches because the thickness of the gold leaf is given in inches. Since there are 12 inches in a foot, we can multiply the area by 12 * 12 = 144 to get the area in square inches. Therefore, the area of the ceiling in square inches is 8,200 sq ft * 144 = 1,180,800 sq in.

To find the volume of gold leaf needed, we multiply the area by the thickness of the gold leaf. The thickness is given as five-millionths of an inch, which can be written as 5/1,000,000 inches. So, the volume of gold leaf needed is 1,180,800 sq in * 5/1,000,000 in = 5.904 cu in.

Since the density of gold is 19.32 g/cm^3, we can convert the volume from cubic inches to cubic centimeters by multiplying by the conversion factor 16.39 (1 cu in = 16.39 cu cm). Therefore, the volume of gold leaf needed is 5.904 cu in * 16.39 cu cm/cu in = 96.7 cu cm.

To find the mass of gold needed, we multiply the volume by the density. So, the mass of gold needed is 96.7 cu cm * 19.32 g/cu cm = 1,870.724 g.

Since gold is usually measured in troy ounces, we need to convert the mass from grams to troy ounces. There are 31.1035 grams in 1 troy ounce. Therefore, the mass of gold needed is 1,870.724 g / 31.1035 g/troy oz = 60.135 troy oz.

Lastly, to find the cost of the gold, we multiply the mass by the cost per troy ounce. The cost per troy ounce is $1654. Therefore, the cost of the gold needed is 60.135 troy oz * $1654/troy oz = $99,481.59.

In conclusion, to cover a 100 ft * 82 ft ceiling with gold leaf that is five-millionths of an inch thick, approximately 60.135 troy ounces of gold will be needed, costing approximately $99,481.59.

To know more about amount refer here:

https://brainly.com/question/2681498

#SPJ11

To find the area of material needed to make each cone-shaped hat, we need to calculate the lateral surface area of the cone. The lateral surface area represents the curved surface area of the cone, excluding the base.

The formula for the lateral surface area of a cone is given by:

Lateral Surface Area = π * r * slant height

Where π is approximately 3.14159, r is the radius of the base, and the slant height is the distance from the tip of the cone to any point on the circumference of the base.

In this case, the diameter of the cone-shaped hat is 4 inches, which means the radius (r) is half of that, so r = 4 / 2 = 2 inches. The slant height is given as 6.8 inches.

Substituting these values into the formula, we have:

Lateral Surface Area = 3.14159 * 2 * 6.8

= 42.7196 square inches

Rounded to the nearest tenth, the area of material needed to make each cone-shaped hat, assuming there is no overlap of material, is approximately 42.7 square inches.

Learn more about diameter here:

brainly.com/question/32968193

#SPJ11

If we know that hanj is a decreasing sequence and all its terms lie between the numbers 5 and 8, it can be explained as follows:

Decreasing Sequence: The term "decreasing sequence" means that each subsequent term in the sequence is smaller than its preceding term. In the case of hanj, this implies that each hanj term is smaller than the one that comes before it. This information establishes the order and pattern of the sequence.

Upper Bound: The fact that all the terms of hanj lie between the numbers 5 and 8 indicates that no term in the sequence exceeds the value of 8. This upper bound of 8 sets a limit on the magnitude of the hanj terms, ensuring they do not exceed this value.

Lower Bound: Similarly, the statement suggests that none of the hanj terms is less than the number 5. This establishes a lower bound for the sequence, indicating that the terms are not smaller than 5.

Combining these two bounds (5 and 8) along with the decreasing nature of the sequence, we can conclude that the hanj sequence is a monotonically decreasing sequence with terms ranging from 5 to 8, inclusive.

Learn more about numbers here:

brainly.com/question/24908711

#SPJ11

Answer:

86.6%

Step-by-step explanation:

new mark = (previous mark x weight of previous work) + (new mark x weight of new work)

In this case, your previous mark is 83%, and it is weighted at 70% (100% - 30%). Your new mark is 95%, and it is weighted at 30%. Substituting these values into the formula, we get:

new mark = (83% x 0.7) + (95% x 0.3)

new mark = 58.1% + 28.5%

new mark = 86.6%

So, your mark now is 86.6%

Answer:

86.6%

Step-by-step explanation:

Since the summative is worth 30% of the grade, then the average of 83% is worth 70% of the grade.

70% of 83% + 30% of 90% = 0.7 × 83% + 0.3 × 95% = 58.1% + 28.5% = 86.6%

Answer: 86.6%

The factored form of 10x² - 10 is 10(x + 1)(x - 1).

To factor the expression 10x² - 10, we can first look for common factors among the terms. In this case, both terms are divisible by 10, so we can factor out the greatest common factor, which is 10:

10(x² - 1)

Now, the expression inside the parentheses, x² - 1.

This is a difference of squares, which can be factored using the identity

a² - b² = (a + b)(a - b). In this case, a = x and b = 1:

10((x + 1)(x - 1))

Therefore, the factored form of 10x² - 10 is 10(x + 1)(x - 1).

Learn more about Factored form here:

https://brainly.com/question/33784635

#SPJ4

Answer:

Step-by-step explanation:

All interior angles in a quadrilateral add up to 360.

The missing interior angle in the lower left side is 110 due to the linear pair theorem. 70+?=180 , ?=110

So,

80+56+110+3x-6=360

240+3x=360

3x=120

x=40

The solution to the equation is x = 4/3.

We have,

Step 1: Simplify the equation.

To simplify, we can start by cross-multiplying the equation:

3 * (x² - 1) = 1 * (x + 1)

Expanding the multiplication:

3x² - 3 = x + 1

Step 2: Rearrange the equation.

Move all terms to one side to form a quadratic equation:

3x² - x - 4 = 0

Step 3: Solve the quadratic equation.

x = (-b ± √(b² - 4ac)) / (2a)

Applying the values a = 3, b = -1, and c = -4:

x = (-(-1) ± √((-1)² - 4 * 3 * -4)) / (2 * 3)

x = (1 ± √(1 + 48)) / 6

x = (1 ± √49) / 6

x = (1 ± 7) / 6

This yields two possible solutions:

x₁ = (1 + 7) / 6 = 8 / 6 = 4/3

x₂ = (1 - 7) / 6 = -6 / 6 = -1

Step 4: Check the solutions.

Let's substitute the values of x back into the original equation and verify if they hold true:

For x = 4/3:

Left-hand side: 3 / (4/3 + 1) = 3 / (7/3) = 9/7

Right-hand side: 1 / ((4/3)² - 1) = 1 / (16/9 - 1) = 1 / (16/9 - 9/9) = 1 / (7/9) = 9/7

The left-hand side and right-hand side are equal, so x = 4/3 is a valid solution.

For x = -1:

Left-hand side: 3 / (-1 + 1) = 3 / 0 (undefined)

Right-hand side: 1 / ((-1)² - 1) = 1 / (1 - 1) = 1 / 0 (undefined)

In this case, the equation is undefined for x = -1.

Therefore,

The solution to the equation is x = 4/3.

Learn more about solutions of equations here:

https://brainly.com/question/545403

#SPJ4

The absolute uncertainty of the product is the sum of the absolute uncertainties of the individual terms. The answer to (c) is 3.11 ± 0.26 mmol, with a percent relative uncertainty of 8.3%.

The absolute uncertainty of the first term is 1.0 mM, the absolute uncertainty of the second term is 0.2 mL, and the absolute uncertainty of the third term is 0.2 mL. So, the absolute uncertainty of the product is 1.0 + 0.2 + 0.2 = 1.4 mM.

The percent relative uncertainty of the product is the absolute uncertainty divided by the value of the product, multiplied by 100%. So, the percent relative uncertainty of the product is 1.4 / 91.3 * 100% = 1.5%.

The value of the product is 91.3 * 40.3 / 21.1 = 174.379 mM.

Therefore, the answer to (b) is 174.379 ± 1.4 mM, with a percent relative uncertainty of 1.5%.

The absolute uncertainty of the difference is the sum of the absolute uncertainties of the individual terms. The absolute uncertainty of the first term is 0.05 mmol, the absolute uncertainty of the second term is 0.01 mmol, and the absolute uncertainty of the third term is 0.2 mL. So, the absolute uncertainty of the difference is 0.05 + 0.01 + 0.2 = 0.26 mmol.

The percent relative uncertainty of the difference is the absolute uncertainty divided by the value of the difference, multiplied by 100%. So, the percent relative uncertainty of the difference is 0.26 / 3.12 * 100% = 8.3%.

The value of the difference is 4.97 - 1.86 = 3.11 mmol.

Therefore, the answer to (c) is 3.11 ± 0.26 mmol, with a percent relative uncertainty of 8.3%.

Learn more about absolute uncertainty here:

brainly.com/question/1301718

#SPJ11

The integral [tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx[/tex] when evaluated is 72π

From the question, we have the following parameters that can be used in our computation:

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx[/tex]

Expand

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = \int\limits^6_{-6} {[x\sqrt{36 - x^2} + 4\sqrt{36 - x^2}}] \, dx[/tex]

So, we have

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = \int\limits^6_{-6} {[x\sqrt{36 - x^2} dx+ 4\int\limits^6_{-6}\sqrt{36 - x^2}}] \, dx[/tex]

Let u = 36 - x² and du = -2x

So, we have:

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 4\int\limits^6_{-6}\sqrt{36 - x^2}}] \, dx[/tex]

Next, we have

x = 6sin(u), where [tex]u = \sin^{-1}(\frac x6})[/tex]

This gives

dx = 6cos(u)du

So, we have

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 4\int\limits^6_{-6} 6\cos(u) \sqrt{36 - 36\sin^2(u)}}] \, du[/tex]

Factor out √36

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 4\int\limits^6_{-6} 6\cos(u) * 6\sqrt{1 - \sin^2(u)}}] \, du[/tex]

Rewrite as

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 4\int\limits^6_{-6} 6\cos(u) * 6\sqrt{\cos^2(u)}}] \, du[/tex]

So, we have

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 4\int\limits^6_{-6} 6\cos(u) * 6\cos(u)}] \, du[/tex]

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 4\int\limits^6_{-6} 36\cos^2(u)}] \, du[/tex]

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = [-\frac{(36 - x^2)^\frac 32}{3}]|\limits^6_{-6} + 144\int\limits^6_{-6} \cos^2(u)} \, du[/tex]

When integrated, we have

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = -\frac{(36 - x^2)^\frac23}{3} + 2x\sqrt{36 - x^2} + 72\sin^{-1}(\frac{x}{6})[/tex]

Substitute in the boundaries and evaluate

So, we have

[tex]\int\limits^6_{-6} {(x + 4)\sqrt{36 - x^2}} \, dx = 72\pi[/tex]

Hence, the solution is 72π

Read more about integral at

https://brainly.com/question/32418363

#SPJ4

Evaluating f(3,173) to 4 decimal places using the function f(x) = log(x) yields approximately 5.5272. Evaluating f(41,290) to 4 decimal places using the function f(x) = ln(x) yields approximately 10.6229.

To evaluate f(3,173) using the function f(x) = log(x), we substitute 3,173 into the function and compute log(3,173) using the logarithmic properties. The result is approximately 5.5272. The logarithm function calculates the exponent to which the base (in this case, 10) must be raised to obtain the input value (3,173).

To evaluate f(41,290) using the function f(x) = ln(x), we substitute 41,290 into the function and compute ln(41,290) using the natural logarithm. The result is approximately 10.6229. The natural logarithm, denoted as ln, uses the base of the mathematical constant e (approximately 2.71828). It represents the logarithm to the base e, where e is Euler's number and has various applications in mathematics and science.

By evaluating the given expressions using the respective logarithmic functions, we obtain the approximate values of 5.5272 and 10.6229 for f(3,173) and f(41,290), respectively, rounded to four decimal places.  

Learn more about logarithmic properties here:

https://brainly.com/question/12049968

#SPJ11

The answer is  (f·g)(-1) = 14.To find the value of (f·g)(-1) with the given functions, we first need to find the value of f·g and then substitute -1 into the function.

Let's start by finding the value of f·g, which is the product of f(x) and g(x):
f(x) = x² + 2x - 1
g(x) = 4x - 3
f(x) · g(x) = (x² + 2x - 1) · (4x - 3)
= 4x³ - 3x² + 8x² - 6x - 4x + 3
= 4x³ + 5x² - 10x + 3
Now that we have the function for f·g, we can substitute -1 into it to find the value of (f·g)(-1):
(f·g)(-1) = 4(-1)³ + 5(-1)² - 10(-1) + 3
= -4 + 5 + 10 + 3
= 14
Therefore, (f·g)(-1) = 14.

For more such questions on functions

https://brainly.com/question/14460502

#SPJ8

To calculate the volume of the box in cubic centimeters, we need to convert all the measurements to the same unit, which is centimeters.

Given:

Length = 2 cm

Width = 0.09 m (Since 1 meter = 100 cm, 0.09 m = 0.09 * 100 cm = 9 cm)

Height = 20 mm (Since 1 cm = 10 mm, 20 mm = 20 / 10 = 2 cm)

Now, we can calculate the volume of the box:

Volume = Length x Width x Height

= 2 cm x 9 cm x 2 cm

= 36 cm³

Therefore, the volume of the box is 36 cubic centimeters.

To learn more about volume : brainly.com/question/28058531

#SPJ11

The polynomial function with rational coefficients that has the roots -4 and 2i is P(x) = x^3 + 4x^2 + 4x + 16.

To find a polynomial function with rational coefficients that has the roots -4 and 2i, we need to consider the fact that complex roots always come in conjugate pairs. This means that if 2i is a root, then its conjugate -2i must also be a root of the polynomial.

Now, let's construct the polynomial function step by step:

Start with the linear factors for each root:

(x - (-4)) = (x + 4)  // for the root -4

(x - (2i)) = (x - 2i) // for the root 2i

Since complex roots come in conjugate pairs, we include the conjugate of (x - 2i), which is (x + 2i):

(x + 2i) // for the conjugate root -2i

Combine all the linear factors together:

(x + 4)(x - 2i)(x + 2i)

Simplify the expression using the difference of squares formula: (a^2 - b^2) = (a + b)(a - b):

(x + 4)((x)^2 - (2i)^2)

Expand and simplify further:

(x + 4)(x^2 + 4)

= x(x^2 + 4) + 4(x^2 + 4)

= x^3 + 4x + 4x^2 + 16

= x^3 + 4x^2 + 4x + 16

Therefore, the polynomial function with rational coefficients that has the roots -4 and 2i is P(x) = x^3 + 4x^2 + 4x + 16.

learn more about polynomial here

https://brainly.com/question/11536910

#SPJ11

The dimensions of the other matrix (matrix B) would be 5×3.

Here, we have,

If the product of two matrices has dimensions 4×3, it means that the number of columns in the first matrix (let's call it matrix A) is equal to the number of rows in the second matrix (let's call it matrix B).

Given that

one of the matrices in the multiplication has dimensions 4×5,

we know that this matrix (let's assume it is matrix A) has 5 columns.

Since the number of columns in matrix A must match the number of rows in matrix B for matrix multiplication, the other matrix (matrix B) must have 5 rows.

Therefore, the dimensions of the other matrix (matrix B) would be 5×3.

To learn more on matrix click:

brainly.com/question/28180105

#SPJ4

45° is the measure of an angle that is coterminal with 405°

To find an angle that is coterminal with 405°, we need to subtract or add multiples of 360° until we get an angle within the range of 0° to 360°.

Starting with 405°, we can subtract 360° from it to bring it within the desired range.

405° - 360° = 45°

So, an angle that is coterminal with 405° is 45°.

Coterminal angles are angles that have the same initial and terminal sides but differ by a multiple of 360°. In other words, they point in the same direction but may complete more than one full revolution.

In this case, we are given the angle 405°. Since 360° represents one complete revolution, we can subtract 360° from 405° to find an angle that is coterminal within the range of 0° to 360°.

By subtracting 360° from 405°, we get 45°, which falls within the desired range. Therefore, 45° is the measure of an angle that is coterminal with 405°

Learn more about coterminal here:

brainly.com/question/12515591

#SPJ11

The slope of the line that passes through the given points is 2/3.

The slope of line is calculated using the formula -

Slope = change in y-coordinates/change in x-coordinates.

Calculating the change in y-coordinates = -2 - 2

Calculating the change in y-coordinates = -4

Calculating the change in x-coordinates = -3 - 3

Calculating the change in x-coordinates = -6

Now calculating the slope using the values of y-coordinates and x-coordinates

Slope = -4/-6

Cancelling negative sign and performing division on Right Hand Side of the equation

Slope = 2/3

Hence, the slope of the line is 2/3.

Learn more about slope -

https://brainly.com/question/16949303

#SPJ4

The slope of the line passing through the given points (3,2) and (-3,-2) is 2/3. This is found by using the slope formula (y2 - y1) / (x2 - x1) and simplifying the resulting fraction.

In Mathematics, particularly algebra, the slope of a line can be calculated using two given points in the formula: (y2 - y1) / (x2 - x1). Using the points provided: (3,2) and (-3,-2), the slope would be calculated as follows:

Consequently, the slope of the line that passes through the points (3,2) and (-3,-2) is 2/3.

https://brainly.com/question/34849567

#SPJ12

The rational zeros of P(x) are -4/5, 1/2, and 5/2.The factored form of P(x) is (x + 4/5)(2x - 1)(2x - 5).

To find the possible rational zeros for the polynomial function P(x) = 10x³ + 17x² - 97x - 20, we can use the rational root theorem. According to the theorem, the possible rational zeros are given by the factors of the constant term (in this case, -20) divided by the factors of the leading coefficient (in this case, 10).

The factors of -20 are ±1, ±2, ±4, ±5, ±10, and ±20.

The factors of 10 are ±1, ±2, ±5, and ±10.

Combining these factors, we can write the possible rational zeros as follows: A. 1, 2, 5, 4, 10, 20, 1/2, 1/5, 1/10, 2/5, 4/5, 5/2

Therefore, the correct answer is (A).Next, to find the rational zeros of P(x), we can use synthetic division or polynomial long division to test each possible zero and check for any remainder. However, since the list of possible zeros is quite long, I will use a computer algebra system to find the rational zeros. Using a computer algebra system, we find that the rational zeros of P(x) = 10x³ + 17x² - 97x - 20 are: x = -4/5

x = 1/2

x = 5/2

Therefore, the rational zeros of P(x) are -4/5, 1/2, and 5/2.Finally, to factor P(x), we can use the found rational zeros and perform polynomial division. The quotient will be a quadratic polynomial. Let's perform the polynomial division:

(x + 4/5)(2x - 1)(2x - 5) = 10x³ + 17x² - 97x - 20

Therefore, the factored form of P(x) is (x + 4/5)(2x - 1)

Learn more about rational zeros here:

https://brainly.com/question/29004642

#SPJ11