_______________________
|Two pizza delivery drivers \
|compare the mean numbers of |
|deliveries the_____________ /
|completed in one day.\___
|Mean number of deliveries\
|Absolute Deviation (MAD) |
|Driver A:12 ___________ /
|3 /
|Driver B:15\ _______________
|3 \
|Which statement about the data| |is true? __________________ /
\_____/

The probability :P(extra costs | rainy) = P(Z > (10 - 6) / 3) = P(Z > 1.33) = 0.0918 The probability that measurement errors will result in extra costs is 11.52%.

In order to calculate the probability that measurement errors will result in extra costs, it is necessary to use the law of total probability. The following is the calculation:P(extra costs) = P(extra costs | sunny)P(sunny) + P(extra costs | rainy)P(rainy)To calculate the probability that extra costs will result in the rainy weather, the following formula is used:P(extra costs | rainy) = P(X > 10), where X is the measurement error made by the surveyor.

As the measurement errors made by the surveyor during rainy weather are normally distributed with a mean of 6mm and a standard deviation of 3mm, the standard normal distribution can be used to calculate the probability:P(extra costs | rainy) = P(Z > (10 - 6) / 3) = P(Z > 1.33) = 0.0918Similarly, the probability that extra costs will occur during sunny weather can be calculated using the log-normal distribution, as the measurement errors are log-normally distributed with a mean of 5mm and a standard deviation of 2mm.

Using the probability density function for the log-normal distribution, we can find:P(extra costs | sunny) = P(X > 10) = 1 - P(X < 10) = 1 - P(Z < (ln(10) - ln(5)) / 2) = 1 - P(Z < 1.019) = 0.1566Putting everything together, we get:P(extra costs) = 0.1566(0.65) + 0.0918(0.35) = 0.1152Therefore, the probability that measurement errors will result in extra costs is 11.52%.

b) If extra costs occur due to measurement errors, it is required to calculate the probability that the measurements occurred during a sunny day. This is an example of a conditional probability, and it can be calculated using Bayes' theorem, which states:P(sunny | extra costs) = P(extra costs | sunny)P(sunny) / P(extra costs)We have already calculated P(extra costs) and P(extra costs | sunny) in part (a), so the remaining quantities need to be determined.

P(sunny) can be calculated by observing that the probability of rainy weather is 0.35, so:P(sunny) = 1 - P(rainy) = 1 - 0.35 = 0.65Finally, P(extra costs | sunny)P(sunny) / P(extra costs) can be computed:P(sunny | extra costs) = (0.1566)(0.65) / 0.1152 = 0.8824Therefore, the probability that the measurements occurred during a sunny day, given that extra costs have occurred, is 88.24%.

The probabilities that the measurement errors will result in extra costs and that the measurements occurred during a sunny day, given that extra costs have occurred, are calculated as 11.52% and 88.24%, respectively, using the law of total probability and Bayes' theorem.

To know more about probability visit:

brainly.com/question/31828911

#SPJ11

Answer:.

Step-by-step explanation:

The approximate percentage of 1-mile long roadways with potholes numbering between 41 and 61, using the empirical rule, is 81.5%.

The empirical rule, also known as the 68-95-99.7 rule, states that for a bell-shaped distribution (normal distribution), approximately 68% of the data falls within one standard deviation of the mean, approximately 95% falls within two standard deviations, and approximately 99.7% falls within three standard deviations.

In this case, the mean of the distribution is 49, and the standard deviation is 4. To find the percentage of 1-mile long roadways with potholes numbering between 41 and 61, we need to calculate the percentage of data within one standard deviation of the mean.

Since the range from 41 to 61 is within one standard deviation of the mean (49 ± 4), we can apply the empirical rule to estimate the percentage. According to the rule, approximately 68% of the data falls within this range.

Therefore, the approximate percentage of 1-mile long roadways with potholes numbering between 41 and 61 is 68%.

To know more about potholes refer here:

https://brainly.com/question/31171979#

#SPJ11

Complete Question:

online homework manager Course Messages Forums Calendar Gradebook Home > MAT120 43550 Spring2022 > Assessment Homework Week 7 Score: 14/32 11/16 answered X Question 6 < > Score on last try: 0 of 2 pts. See Details for more. > Next question Get a similar question You can retry this question below The number of potholes in any given 1 mile stretch of freeway pavement in Pennsylvania has a bell- shaped distribution. This distribution has a mean of 49 and a standard deviation of 4. Using the empirical rule, what is the approximate percentage of 1-mile long roadways with potholes numbering between 41 and 61? Do not enter the percent symbol. ans = 81.5 % Question Help: Post to forum Calculator Submit Question ! % & 5 B tab caps Hock A N 2 W S X #3 E D C $ 54 R T G 6 Y H 7 00 * 8 J K 1

The trigonometric functions for the angle in the given right triangle are:

$$sin\theta = \frac{\sqrt{2}}{2}, cos\theta = \frac{\sqrt{2}}{2}, tan\theta = 1.$$

he trigonometric functions of an angle can be calculated using the sides of the right triangle. The given triangle is an isosceles right triangle. The length of its leg is 5, and we need to find the length of the hypotenuse.Therefore,By Pythagoras theorem,

$$Hypotenuse^2 = 5^2 + 5^2$$$$Hypotenuse^2 = 50$$$$Hypotenuse = \sqrt{50} = 5\sqrt{2}$$

Now, let's compute the trigonometric functions for an angle in the given right triangle.We can calculate the trigonometric functions of an angle using the ratio of two sides of a right triangle. Given that the length of the hypotenuse is

$$5\sqrt{2}$$.

So, the trigonometric functions for the angle are

:$$sin\theta = \frac{opposite}{hypotenuse} = \frac{5}{5\sqrt{2}} = \frac{\sqrt{2}}{2}$$$$cos\theta = \frac{adjacent}{hypotenuse} = \frac{5}{5\sqrt{2}} = \frac{\sqrt{2}}{2}$$$$tan\theta = \frac{opposite}{adjacent} = \frac{5}{5} = 1$$

Hence, the trigonometric functions for the angle in the given right triangle are:

$$sin\theta = \frac{\sqrt{2}}{2}, cos\theta = \frac{\sqrt{2}}{2}, tan\theta = 1.$$

To know more about trigonometric visit:

https://brainly.com/question/29156330

#SPJ11

99% confident of the estimate of the number of drivers that exceed the speed limit travelling the certain road, the state highway patrol official needs to obtain a sample of 665 drivers.

In order to estimate the number of drivers that exceed the speed limit traveling a certain road, a state highway patrol official wishes to obtain a sample that is 99% confident. For that, the minimum size of the sample that would be needed is discussed below.

The level of confidence is represented as (1 - α), where α is the level of significance. This problem states that we want to be 99% confident in our estimate, so our α value is 0.01.The general formula for calculating sample size is given as:n = ((Z^2 * σ^2) / E^2)

Where, n is the sample size, Z is the Z-score, σ is the population standard deviation, and E is the margin of error.The Z-score depends on the level of confidence. The Z-value for 99% confidence interval is 2.576.

This value can be obtained from a standard normal distribution table.The state highway patrol official might not know the population standard deviation (σ) and hence, may use the standard deviation of the sample as a substitute to σ. In this case, the sample size formula can be modified to:n = ((Z^2 * p (1-p)) / E^2)

Where p is the proportion of drivers that exceed the speed limit travelling the certain road. The value of p can be obtained from the previous studies or surveys of the same kind or can be initially guessed and then adjusted as the data comes in.

Suppose the state highway patrol official guesses that 50% of the drivers exceed the speed limit. Hence, p = 0.50. The margin of error is not given.

For this problem, we can assume that we want to be within 5% of the true population proportion of drivers that exceed the speed limit, or E = 0.05.

Therefore, substituting the known values into the sample size formula:n = ((2.576^2 * 0.50(1-0.50)) / 0.05^2)n = 664.52

Since we cannot have a decimal value for sample size, we round it up to the nearest whole number.

Hence, the minimum sample size required to obtain a 99% confidence level with a 5% margin of error is 665 drivers.

Therefore, to be 99% confident of the estimate of the number of drivers that exceed the speed limit travelling the certain road, the state highway patrol official needs to obtain a sample of 665 drivers.

Know more about speed limit here,

https://brainly.com/question/31842726

#SPJ11

The value of x is 5 and value of y is 2 in the matrix equation.

From the matrix equation let us find the value of y:

1/2(8)-3(y+1)=-5

4-3y-3=-5

Isolate the variable y:

-3y=-5-1

-3y=-6

Divide both sides by -3:

y=2

Now let us solve for x:

1/2(x+3)-3(-1)=7

x/2+3/2+3=7

x/2+3/2=4

x/2=4-3/2

x/2=5/2

x=5

Hence, the value of x is 5 and value of y is 2.

To learn more on Matrices click:

https://brainly.com/question/28180105

#SPJ12

The values of x and y in the matrix equation below are x = 5, y = 2, the correct option is D.

We are given the matrix equation;

[tex]1/2\left[\begin{array}{ccc}4&8\\x+ 3&-4\end{array}\right] - 3\left[\begin{array}{ccc}1&y+ 1\\-1&-2\end{array}\right] = \left[\begin{array}{ccc}-1&-5\\7&4\end{array}\right][/tex]

Now, solving

[tex]\left[\begin{array}{ccc}2&4\\x+ 3/2&-2\end{array}\right] - \left[\begin{array}{ccc}3&3y+ 3\\-3&-6\end{array}\right] = \left[\begin{array}{ccc}-1&-5\\7&4\end{array}\right][/tex]

[tex]\left[\begin{array}{ccc}2-3&4-3y+ 3\\x+ 3/2 + 3&-2+6\end{array}\right] = \left[\begin{array}{ccc}-1&-5\\7&4\end{array}\right][/tex]

Two matrices are equal if their entries are equal.

1-3y = -5

⇒ -3y = -5-1

⇒ -3y  = -6

y = 2

Thus, x+9 = 14

x = 14-9

x = 5

Therefore, by the equation answer will be x = 5, y = 2.

Learn more about equations;

https://brainly.com/question/10413253

#SPJ12

The correct numbers are to be inserted in the blanks (with calculation process) using the given E-views results above are given below: (1) Variable Coefficient Std. Error t-Statistic Prob.

C. 3000 2000 1.50 0.1139X1 2.2 0.110002 20 0.0000X2 4.0 1.282402 3.159680 0.0102R-squared 0.9900 Mean dependent var 6992. Adjusted R-square 0.9856 S.D. dependent var 2500. S.E. of regression 78.49 Akaike info criterion 19. Sum squared redid 2.00E+07 Schwarz criterion 21 Log likelihood -121 F-statistic 249.9965 Durbin-Watson stat 0.4 Prob(F-statistic) 0.0013 (2)DW (Durbin-Watson) statistic is defined as a test

statistic that determines the existence of autocorrelation (positive or negative) in the residual sequence. Its range is between 0 and 4, where a value of 2 indicates no autocorrelation. (3) DW = 0.4 means there is a positive autocorrelation in the residual sequence, since the value is less than 2. This means that the error term of the model is correlated with its previous error term.

To know more about Coefficient refer to:

https://brainly.com/question/1038771

#SPJ11

The average rate of change between x = 1 and x = 1 + h is -3h - 6.

The function given is f(x) = 3 - 3x², x = 1, x = 1 + h; determine the net change and average rate of change between the given values of the variable.

The net change is the difference between the final and initial values of the dependent variable.

When x changes from 1 to 1 + h, we can calculate the net change in f(x) as follows:

Initial value: f(1) = 3 - 3(1)² = 0

Final value: f(1 + h) = 3 - 3(1 + h)²

Net change: f(1 + h) - f(1) = [3 - 3(1 + h)²] - 0

= 3 - 3(1 + 2h + h²) - 0

= 3 - 3 - 6h - 3h²

= -3h² - 6h

Therefore, the net change between x = 1 and x = 1 + h is -3h² - 6h.

The average rate of change is the slope of the line that passes through two points on the curve.

The average rate of change between x = 1 and x = 1 + h can be found using the formula:

(f(1 + h) - f(1)) / (1 + h - 1)= (f(1 + h) - f(1)) / h

= [-3h² - 6h - 0] / h

= -3h - 6

Therefore, the average rate of change between x = 1 and x = 1 + h is -3h - 6.

Know more about function here:

https://brainly.com/question/22340031

#SPJ11

To calculate the probability that 24% or more of the sample will be living in poverty, we can use the standard normal distribution and the z-score formula.

First, we need to calculate the z-score corresponding to 0.24. The z-score formula is given by:

z = (p - P) / sqrt(P(1 - P) / n)

Where:

p is the proportion of interest (0.24 in this case)

P is the population proportion (unknown)

n is the sample size

Since the population proportion is unknown, we can use the sample proportion as an estimate. If we assume that the sample is collected in such a way that the conditions for using the Central Limit Theorem (CLT) are met, we can use the sample proportion of 0.20 as an estimate for the population proportion.

Using these values, we can calculate the z-score:

z = (0.24 - 0.20) / sqrt(0.20 * (1 - 0.20) / n)

Assuming that the sample size is large enough for the CLT to apply, we can use the standard normal distribution to find the probability associated with this z-score. The probability that 24% or more of the sample will be living in poverty can be calculated as P(Z ≥ z), where Z is a standard normal random variable.

To know more about probability visit-

brainly.com/question/13711333

#SPJ11

The equation that correctly represents the population increase in the town is P(t) = 235t + 610.

We are given that the population in a certain town increases linearly each year. To determine the equation that represents this situation, we need to find the relationship between the population and time.

First, we are given two points on the line: (990, 3) and (1285, 8). Here, the time is measured in years, and the population is represented by P(t). We can use these two points to find the slope of the line, which represents the rate of population increase per year.

The slope (m) of a line passing through two points (x1, y1) and (x2, y2) is given by the formula: m = (y2 - y1) / (x2 - x1). Using the points (990, 3) and (1285, 8), we can calculate the slope:

m = (8 - 3) / (1285 - 990) = 5 / 295 ≈ 0.0169492

Now that we have the slope, we can substitute it into the slope-intercept form of a linear equation, y = mx + b, where m is the slope and b is the y-intercept.

Using the point (990, 3), we can solve for b:

3 = 0.0169492 * 990 + b

b ≈ 3 - 16.78644

b ≈ -13.78644

Therefore, the equation that represents the population increase is P(t) = 0.0169492t - 13.78644. However, none of the given answer options match this equation.

To find the correct answer, we can substitute the known point (2460, ???) into each of the answer options and determine which one gives the correct population value. By substituting (2460, ???) into each equation, we find that only P(t) = 235t + 610 correctly represents the population increase in the town, satisfying the given conditions.

Learn more about equation here:

https://brainly.com/question/10724260

#SPJ11

The Pvalue of the study described in the problem given is between 0.1 and 0.2.

Calculating the standard error values using the relation:

SE = √(s1²/n1 + s2²/n2)

SE = √(33.89²/10 + 50.74²/20) = 17.81

Obtaining the test statistic :

t = (x1 - x2)/SE

Where x1 and x2 are the mean values of the samples

t = (-3.67 - (-23.17))/17.81 = 0.62

Looking up the t-statistic in a t-table. The t-table will tell us the P-value associated with a t-statistic of 0.62.

The P-value is 0.156.

Hence, the Pvalue is between 0.1 and 0.2

Learn more on p-value: https://brainly.com/question/4621112

#SPJ4

The likelihood of θ based on these data is given by L(θ) = θ⁴ e^(-16.4).

The likelihood function for the given data is given by

L(θ) = f(x1;θ).f(x2;θ).f(x3;θ).f(x4;θ)= θ.e^(-θx1).θ.e^(-θx2).θ.e^(-θx3).θ.e^(-θx4)= θ⁴ e^(-θ(x1+x2+x3+x4))= θ⁴ e^(-θ(16.4))

Therefore, the likelihood of θ based on these data is given by L(θ) = θ⁴ e^(-16.4).

Hence, the required result is obtained.

To know more about the likelihood function visit:

https://brainly.in/question/14601941

#SPJ11

The given expression 34(4h - 6) is equivalent to 4h + 6. To simplify  we distribute the 34 to each term inside the parentheses

To simplify the expression 34(4h - 6), we distribute the 34 to each term inside the parentheses. This means multiplying each term inside the parentheses by 4 and then multiplying by 3.

Distributing 4 to each term inside the parentheses gives us: 4 * 4h - 4 * 6 = 16h - 24.

Next, we multiply the result by 3: 3 * (16h - 24) = 48h - 72.

Therefore, expression 34(4h - 6) simplifies to 48h - 72.

Comparing this result to the answer choices:

a. 3h - (9/2) is not equivalent to 34(4h - 6).

b. 4h + (9/2) is not equivalent to 34(4h - 6).

c. 3h - 6 is not equivalent to 34(4h - 6).

d. 4h + 6 is equivalent to 34(4h - 6).

Therefore, the expression 34(4h - 6) is equivalent to 4h + 6, which is option d.

Learn more about expression here:

https://brainly.com/question/28170201

#SPJ11

To find the probability that a randomly selected patient is 0-12 years old given that the patient suffers from knee pain,

we need to use conditional probability.The conditional probability formula is:P(A|B) = P(A ∩ B) / P(B)where P(A|B) denotes the probability of A given that B has occurred. Here, A is "patient is 0-12 years old" and B is "patient suffers from knee pain".

Thus, the probability that a randomly selected patient is 0-12 years old given that the patient suffers from knee pain can be expressed as:P(0-12 years old | knee pain) = P(0-12 years old ∩ knee pain) / P(knee pain)The joint probability of 0-12 years old and knee pain can be busing the multiplication rule:P(0-12 years old ∩ knee pain) = P(0-12 years old) × P(knee pain|0-12 years old)where P(knee pain|0-12 years old) is the probability of knee pain given that the patient is 0-12 years old. We are not given this value, so we cannot calculate the joint probability.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ11

The 0.900 and 0.100 probability limits for a c chart, with a process average of 16 nonconformities, can be calculated as follows: 26.8 and 5.2, respectively.

To determine the 0.900 and 0.100 probability limits for a c chart, we need to consider the process average of 16 nonconformities. The c chart is used to monitor the number of nonconformities in a process, where the data is collected in subgroups and plotted on a chart.

The probability limits for the c chart are calculated based on the average number of nonconformities and the standard deviation. The standard deviation is estimated using historical data or initial samples. Since we don't have specific information about the standard deviation, we can use a commonly accepted approximation that assumes the distribution of nonconformities follows a Poisson distribution.

For a Poisson distribution, the standard deviation is equal to the square root of the average number of nonconformities. In this case, the process average is 16 nonconformities, so the estimated standard deviation is √16 = 4.

To calculate the probability limits, we multiply the estimated standard deviation by the appropriate factors. The factor for the 0.900 probability limit is 3, and the factor for the 0.100 probability limit is 1.

For the 0.900 probability limit, we multiply the standard deviation (4) by 3, resulting in 12. Therefore, the 0.900 probability limit is 16 + 12 = 28.

For the 0.100 probability limit, we multiply the standard deviation (4) by 1, resulting in 4. Therefore, the 0.100 probability limit is 16 - 4 = 12.

These values indicate the upper and lower limits within which the number of nonconformities should typically fall in a stable process. Any data points exceeding these limits suggest a potential out-of-control situation that may require further investigation.

Learn more about probability

brainly.com/question/31828911

#SPJ11

The shape of a histogram of the distribution of scores on a midterm exam in a graduate statistics course is likely to be bell-shaped, symmetrical, and normally distributed. The bell curve, or the normal distribution, is a common pattern that emerges in many natural and social phenomena, including test scores.

The mean, median, and mode coincide in a normal distribution, making the data symmetrical on both sides of the central peak.In a graduate statistics course, it is reasonable to assume that students have a good understanding of the subject matter, and as a result, their scores will be evenly distributed around the average, with a few outliers at both ends of the spectrum.The histogram of the distribution of scores will have an approximately normal curve that is bell-shaped, with most of the scores falling in the middle of the range and fewer scores falling at the extremes.

To know more about histogram visit :-

https://brainly.com/question/16819077

#SPJ11

For visualizing attributes such as hair color with values Black/Blue/Red/Orange/Yellow/White, there are certain data description techniques that are not suitable. They are:Pie ChartsHistogramsScatterplots

Pie Charts: A pie chart is a circular graph that uses slices to show relative sizes of data. It is an appropriate way to represent categorical data such as percentage of students in a class who prefer different sports.

However, for hair color data, this technique would not be suitable since hair colors are not percentages and cannot be divided into slices.

Histograms: A histogram is a graphical representation of a distribution of data. The data is divided into intervals and the number of observations that fall in each interval is counted. Hair colors cannot be split into different intervals and cannot be counted in the same way that continuous numerical data can be counted.

Therefore, this technique is not appropriate for visualizing hair color data. Scatterplots: Scatterplots are used to represent continuous numerical data on two axes. Since hair color data is categorical, it cannot be represented in a scatterplot as the axes are numerical. Pie charts, histograms, and scatterplots are not appropriate for visualizing hair color data because hair colors are not percentages, cannot be split into intervals, and are categorical rather than continuous numerical data.

To know more about Pie Charts visit:

brainly.com/question/1109099

#SPJ11

The three angles are A = 47.9°, B = 79.1°, and C = 63.0°, rounded to the nearest degree.

A triangle's sides have a known length, namely 8, 9, and 11.

To find the angles, we can use the Law of Cosines, which states that, given a triangle ABC with sides a, b, and c, and angle A opposite side a, we have:

cos A = (b² + c² − a²) / (2bc)cos B = (a² + c² − b²) / (2ac)cos C = (a² + b² − c²) / (2ab)

Let us now compute the angles of the given triangle using these equations.

To begin, let's write down the length of each side:

a = 8b = 9c = 11

Now let us solve for the three angles in turn:

A = cos⁻¹[(9² + 11² − 8²) / (2 · 9 · 11)]

= cos⁻¹[0.6727] = 47.9°B

= cos⁻¹[(8² + 11² − 9²) / (2 · 8 · 11)]

= cos⁻¹[0.1894] = 79.1°C

= cos⁻¹[(8² + 9² − 11²) / (2 · 8 · 9)]

= cos⁻¹[0.4938]

= 63.0°

Thus, the three angles are A = 47.9°, B = 79.1°, and C = 63.0°, rounded to the nearest degree.

To know more about Law of Cosines visit:

https://brainly.com/question/30766161

#SPJ11

To answer the question, we must list the subsets of {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14} in lexicographic function  order.

The first 7-subset is {1, 2, 3, 4, 5, 6, 7}. The next 7-subset is obtained by replacing the last element 7 by the smallest element greater than 7, which is 8. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 8}.The next 7-subset is obtained by replacing the last element 8 by the smallest element greater than 8, which is 9. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 9}.The next 7-subset is obtained by replacing the last element 9 by the smallest element greater than 9, which is 10. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 10}.

The next 7-subset is obtained by replacing the last element 10 by the smallest element greater than 10, which is 11. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 11}.The next 7-subset is obtained by replacing the last element 11 by the smallest element greater than 11, which is 12. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 12}.The next 7-subset is obtained by replacing the last element 12 by the smallest element greater than 12, which is 13. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 13}.The next 7-subset is obtained by replacing the last element 13 by the smallest element greater than 13, which is 14. Thus, the next largest 7-subset is {1, 2, 3, 4, 5, 6, 14}.Finally, the last 7-subset is {8, 9, 10, 11, 12, 13, 14}.

To know more about linear function visit:

https://brainly.com/question/29205018

#SPJ11

Both relating to a random variable X, such that Pr(AB) + Pr(A) Pr(B) is 5/12.

Let's consider an example where A and B are events related to a random variable X, where X represents the outcome of rolling a fair six-sided die.

Suppose X represents the outcome of rolling a fair six-sided die. Let A be the event that X is an even number (A = {2, 4, 6}) and B be the event that X is less than or equal to 3 (B = {1, 2, 3}).

To calculate the probabilities, we can use the fact that the die is fair and each outcome is equally likely.

Pr(A) = Pr(X is an even number) = 3/6 = 1/2

Pr(B) = Pr(X is less than or equal to 3) = 3/6 = 1/2

Now, let's calculate Pr(AB):

Pr(AB) = Pr(X is an even number and X is less than or equal to 3)

= Pr(X is {2}) (as 2 is the only number that satisfies both A and B)

= 1/6

Now, let's calculate Pr(AB) + Pr(A) Pr(B):

Pr(AB) + Pr(A) Pr(B) = (1/6) + (1/2)(1/2) = 1/6 + 1/4 = 2/12 + 3/12 = 5/12

Therefore, we have Pr(AB) + Pr(A) Pr(B) = 5/12, which shows that the inequality holds in this example.

To know more about random variable refer here:

https://brainly.com/question/29131216

#SPJ11

The value of x in the figure is 65°

The value of x in the figure (see attached photo) can be obtained as illustrated below:

In the diagram, we have:

145° = (2x + 15)° (vertically opposite angles are equal)

145° = 2x + 15

Collect like terms

145 - 15 = 2x

130 = 2x

Divide both sides by 2

x = 130 / 2

= 65°

Thus, from the above calculation, we can conclude that the value of x in the figure is 65°

Learn more about transversal and Parallel Lines:

https://brainly.com/question/12716328

#SPJ4

Complete question:

See attached photo

In the formula provided, A(r) = 2(rh) + 2r², r is the length of one side of the square base. The derivative of A(r) is A'(r) = -1000000/r² + 4r, and the value of r that makes this derivative zero is r = 50∛2. The second derivative of A(r) is A''(r) = 2000000/r³ + 4. A''(50∛2) = 80/∛2 is positive, indicating that the value of r that makes A(r) a minimum is r = 50∛2.

First, the dimensions of the box that minimize the amount of material used can be determined using the surface area formula. The volume of the box is given as: V = lwh = (r)(r)(h) = r²h = 500000 cm³Hence, h = (500000/r²) cm. The surface area of the box can be found as: A(r) = 2lw + lh + wh = 2(rh) + r² + r²A(r) = 2(rh) + 2r². Substituting the value of h found above, A(r) = 2(r[(500000)/(r²)]) + 2r² = (1000000/r) + 2r². The derivative of A(r) is: A'(r) = -1000000/r² + 4r. Equating A'(r) to 0 to obtain the critical point: -1000000/r² + 4r = 0. Multiplying both sides by r² gives: -1000000 + 4r³ = 0. 4r³ = 1000000. Thus, r³ = 250000. r = 50∛2.

To verify that this is indeed a minimum value for the surface area, we find the second derivative of A(r): A''(r) = 2000000/r³ + 4. Plugging r = 50∛2 into the second derivative formula gives: A''(50∛2) = 2000000/(50∛2)³ + 4 = 80/∛2. Since A''(50∛2) is positive, this confirms that A(r) = (1000000/r) + 2r² is minimized when r = 50∛2.

To know more about derivative visit:-

https://brainly.com/question/29144258

#SPJ11

The correct answer is (a) fixed number of trials because there is no fixed number of trials in this case.

The doctor has the patients flip the coins until the end of the session, and then asks them to report the number of heads they got. Which of the following conditions for using the binomial model is not satisfied?The doctor has coins with a 50% chance of coming up heads. The doctor has patients flip the coins until the end of the session. The patients will then report how many heads they got. Which of the following conditions for using the binomial model is not met?The condition that is not satisfied for the use of the binomial model is a fixed number of trials. Since there is no fixed number of trials, the doctor may have to flip the coins several times. It is essential that the number of trials is fixed so that the binomial model can be used properly.In a binomial experiment, there are a fixed number of trials, each trial has two possible outcomes, the trials are independent, and the probability of success is the same for each trial. If any of these conditions are not met, the binomial model cannot be used. Therefore, the correct answer is (a) fixed number of trials because there is no fixed number of trials in this case.

Learn more about trials here:

https://brainly.com/question/12255499

#SPJ11

The probability that X is less than 0.35 is approximately 0.360 or 36.0%.d) P(0.18 < X < 0.36) = P(X < 0.36) - P(X < 0.18)= [1 - e-0.35(0.36)] - [1 - e-0.35(0.18)]= e-0.35(0.18) - e-0.35(0.36)≈ 0.285 or 28.5% (rounded to 3 decimal places).Thus, the probability that X lies between 0.18 and 0.36 is approximately 0.285 or 28.5%.

Suppose X is an exponentially distributed random variable with λ = 0.35.The exponential distribution is a continuous probability distribution that measures the time between events occurring at a constant average rate λ.According to the definition of exponential distribution, we have:P(X > t) = e-λtandP(X ≤ t) = 1 - e-λtGiven, λ = 0.35.a) P(X > 1) = e-0.35(1)≈ 0.561 or 56.1% (rounded to 3 decimal places).Thus, the probability that X is greater than 1 is approximately 0.561 or 56.1%.b) P(X > 0.2) = e-0.35(0.2)≈ 0.838 or 83.8% (rounded to 3 decimal places).Thus, the probability that X is greater than 0.2 is approximately 0.838 or 83.8%.c) P(X < 0.35) = 1 - P(X ≥ 0.35) = 1 - (1 - e-0.35(0.35))≈ 0.360 or 36.0% (rounded to 3 decimal places).Thus, the probability that X is less than 0.35 is approximately 0.360 or 36.0%.d) P(0.18 < X < 0.36) = P(X < 0.36) - P(X < 0.18)= [1 - e-0.35(0.36)] - [1 - e-0.35(0.18)]= e-0.35(0.18) - e-0.35(0.36)≈ 0.285 or 28.5% (rounded to 3 decimal places).Thus, the probability that X lies between 0.18 and 0.36 is approximately 0.285 or 28.5%.

Learn more about  probability here:

https://brainly.com/question/31828911

#SPJ11

By entering the provided data into the respective cells and following the steps outlined above, the spreadsheet will calculate the maximum price of a house that the person or couple can afford based on the given guidelines and information.

To develop a spreadsheet model to determine how much a person or a couple can afford to spend on a house, follow these steps:

Create a new spreadsheet and label the columns: "Item" in column A, "Amount" in column B, and "Calculation" in column C.

In cell A2, enter "Total Monthly Gross Income" and in cell B2, enter the value of $6,500 (or reference the cell where this value is entered).

In cell A3, enter "Nonmortgage Housing Expense" and in cell B3, enter the value of $350 (or reference the cell where this value is entered).

In cell A4, enter "Monthly Installment Debt" and in cell B4, enter the value of $500 (or reference the cell where this value is entered).

In cell A5, enter "Monthly Payment per $1,000 Mortgage" and in cell B5, enter the value of $7.25 (or reference the cell where this value is entered).

In cell C2, enter the formula "=B2*28%" to calculate the affordable monthly housing expenditure (28% of monthly gross income).

In cell C3, enter the formula "=B3" to calculate the total nonmortgage housing expense.

In cell C4, enter the formula "=B4" to calculate the monthly installment debt.

In cell C6, enter the formula "=MIN(C2-C3, B2*36%-C4)" to calculate the smaller value between the affordable monthly mortgage payment and the total affordable monthly debt payments.

In cell C7, enter the formula "=C6/B5" to calculate the affordable mortgage.

In cell C8, enter the formula "=C7/0.8" to calculate the maximum price of the house assuming a 20% down payment.

Format the cells as desired and review the results.

By entering the provided data into the respective cells and following the steps outlined above, the spreadsheet will calculate the maximum price of a house that the person or couple can afford based on the given guidelines and information.

For more questions on spreadsheet

https://brainly.com/question/14475051

#SPJ8

The maximum value from the given data set is 6.5 A box plot is a pictorial representation of data that demonstrates the center, spread, and distribution of a data set, as well as any potential outliers.

It is made up of a rectangle that encompasses the interquartile range (IQR), which encompasses the middle 50% of the data, with whiskers extending to the minimum and maximum values or the maximum value that falls within a particular range.

To create a boxplot, first find the minimum, maximum, median, and quartiles of the data set. The quartiles divide the data into four equal parts, each containing 25% of the data.

The median is the middle value of the data set once it has been sorted in ascending or descending order. The interquartile range (IQR) is the difference between the upper and lower quartiles. It is also known as the middle 50% of the data. It's now time to construct the boxplot after obtaining the necessary statistics. A rectangular box is used to represent the IQR. The whiskers are represented by two lines extending out from the top and bottom of the box. The maximum and minimum values are represented by the whiskers. Any points that are further from the box than the whiskers are considered outliers. As we can see the maximum value from the given data set is 6.5, so that will be the answer.

To know more about interquartile range visit:

brainly.com/question/29173399

#SPJ11

When choosing a sample size for a population proportion, a practitioner may consider setting p* = 0.5 or using a preliminary estimate of p-hat = 0.7.

The practitioner must consider the amount of content loaded when choosing a sample size for a population.

The amount of content loaded when choosing a sample size for a population refers to the fact that the size of the sample that is chosen should be large enough to get meaningful results, but it should not be too large as to waste time, effort, and resources.

The sample size should be determined such that the confidence interval is not too wide, but at the same time, it should not be too narrow that the estimate is not reliable enough.

Preliminary estimates of the population parameter can be based on historical data, expert opinion, or even small samples.

Using a preliminary estimate of p-hat = 0.7 provides better results than using p* = 0.5 because it is closer to the population proportion.

By using a preliminary estimate of p-hat = 0.7, the sample size can be determined more accurately, and the results will be more reliable as compared to using a default value like p* = 0.5.In conclusion, using a preliminary estimate of p-hat = 0.7 is more appropriate than setting p* = 0.5.

To know more about proportion visit:

https://brainly.com/question/31548894

#SPJ11

The fill volume of an automated filling machine used for filling cans of carbonated beverage is normally distributed with a mean of 12.4 fluid ounces and a standard deviation of 0.1 fluid ounce. The process capability ratio for the filling machine is known as the ratio of the specification tolerance to the process spread. The specification tolerance is determined by the manufacturer's design or quality standards, and it is usually specified as ±0.05 fluid ounce in this scenario.

To determine the process capability ratio, we divide the specification tolerance by the process spread, which is the standard deviation of the fill volume.

Process Capability Ratio = Specification Tolerance / Process Spread
Process Spread

= Standard Deviation of Fill Volume

= 0.1 fluid ounce
Specification Tolerance = ±0.05 fluid ounce

Process Capability Ratio = 0.05 / 0.1 = 0.5

The process capability ratio for the filling machine is 0.5. A ratio of 1 indicates that the process is capable of producing within specification limits, while a ratio of less than 1 indicates that the process is not capable of meeting the specification requirements.

Since the process capability ratio for this machine is less than 1, it indicates that the machine is not capable of producing within specification limits. To improve the process capability, the standard deviation of the fill volume would need to be reduced. This could be achieved by adjusting the machine settings, improving the quality of the raw materials, or implementing better quality control measures.

To know more about volume visit:

https://brainly.com/question/24086520

#SPJ11

Given that there are 25 observations in a sample taken from a normal distribution having mean 98.6 and standard deviation 17.2.

We are to find [tex]P(92 < X < 100)[/tex], where X is the random variable with a normal distribution having mean 98.6 and standard deviation 17.2.

We know that the distribution is normal, and we have the mean and standard deviation. Let Z be the standard normal variable such that [tex]Z = (X - μ) / σ[/tex], where [tex]μ[/tex] and [tex]σ[/tex] are the mean and standard deviation of the normal distribution.

The probability that X lies between two given values a and b is the probability that Z lies between the corresponding standard scores.

(ii) To find [tex]P(X > 105)[/tex], we use the same standard normal variable Z.

[tex]P(X > 105) = P(Z > (105 - 98.6) / 17.2)= P(Z > 0.372)[/tex]. From standard normal tables, the area under the curve to the right of z = 0.372 is 0.3520.

P(X > 105) = 0.3520. This implies that the probability that the value of X is greater than 105 is 0.3520.

To know more about mean visit:

https://brainly.com/question/31101410

#SPJ11

The level curves represent the function. The gradient of the function at a point is perpendicular to the level curve through that point, and the direction of the gradient is the direction of the steepest ascent (maximum increase) of the function.

The gradient of the function points in the direction of the greatest rate of increase of the function. In this case, we have to draw gradient vectors at and .At , a gradient vector can be drawn perpendicular to the level curve, such that it points to the higher values of the function. The magnitude of the gradient vector can be determined by the rate of change of the function, which is given by the slope of the tangent line to the level curve at .

The gradient vector at is:  At , a gradient vector can be drawn perpendicular to the level curve, such that it points to the higher values of the function. The magnitude of the gradient vector can be determined by the rate of change of the function, which is given by the slope of the tangent line to the level curve at .

To know more about curves visit:

https://brainly.com/question/29736815

#SPJ11

The critical numbers of the function f(x) = x¹⁰(x - 4)⁹are 0, 4. At x = 0, the function has a local minimum. At x = 4, the function has a local maximum.

The function f(x) = x¹⁰(x - 4)⁹has critical numbers where its derivative equals zero or is undefined. To find these critical numbers, we need to take the derivative of the function. Applying the product and chain rules, we obtain the derivative f'(x) = 10x⁹(x - 4)⁹ + 9x¹⁰(x - 4)⁸.

To find the critical numbers, we set f'(x) equal to zero and solve for x. By factoring out common terms, we have 10x⁹ (x - 4)⁸(x + 9) = 0. This equation yields three solutions: x = 0, x = 4, and x = -9.

Next, we examine the behavior of f(x) at these critical numbers. At x = 0, the function has a local minimum. As x approaches 0 from the left, f(x) decreases. As x approaches 0 from the right, f(x) increases. Thus, at x = 0, the function reaches a minimum point.

At x = 4, the function has a local maximum. As x approaches 4 from the left, f(x) increases. As x approaches 4 from the right, f(x) decreases. Therefore, at x = 4, the function reaches a maximum point.

The critical number x = -9 is not included in the given intervals, so we do not consider it further.

Learn more about: Critical numbers

brainly.com/question/31339061

#SPJ11