(c) if 54.8 ml of bacl2 solution is needed to precipitate all the sulfate in a 534 mg sample of na2so4 (forming baso4), what is the molarity of the solution?

IUPAC nomenclature of structure 1 is 5-bromo-3-ethyl-2,2-dimethylhexane and for structure 2 it is  1,1,4-trimethyl-3 -(1-methylethyl)cyclohexane

IUPAC nomenclature is based on naming a molecule's longest chain of carbons connected by single bonds, whether in a continuous chain or in a ring. All deviations, either multiple bonds or atoms other than carbon and hydrogen, are indicated by prefixes or suffixes according to a specific set of priorities

In structure 1 the longest chain was found to be a 6 carbon chain and the numbering started from the side where it is highly substituted. Hence the name is 5-bromo-3-ethyl-2,2-dimethylhexane

In structure 2 we have a cyclic structure and so the numbering will be done in such a way that all the substituent gets the least numbering hence the name of the compound will be 1,1,4-trimethyl-3 -(1-methylethyl)cyclohexane

To know about the IUPAC nomenclature

https://brainly.com/question/11859599

#SPJ1

On balancing the reaction of formation of ammonia we know that for every one mole of Nitrogen gas, we need three moles of Hydrogen gas to produce, two mole of the ammonia.

We are given with volume of Hydrogen gas i.e. 2.9 ml and are asked to determine the volume of ammonia

Since the volume of hydrogen is given as 2.9 ml = 2.9/1000 l

Mole of hydrogen =2.9/(22.4)(1000)

Mole of hydrogen = 0.129/1000 moles of H₂

Get the number of moles of NH₃

Number of moles of  NH₃ = 2/3 of moles of Hydrogen

Number of moles of  NH₃ = 2/3 * 0.129/1000 moles of H₂

Number of moles of  NH₃ =0.0863/1000 moles of  NH₃

Get the volume of ammonia  NH₃

Volume of ammonia produced = 0.0863 * 22.4

Volume of ammonia produced = 1.933 ml

Hence the volume of ammonia that would be produced by this reaction if 2.9 ml of hydrogen were consumed is 1.933 ml

To know more about Moles:

brainly.com/question/22411862

#SPJ4

The Matchup of each label with the appropriate term is given below:

A: Sigma bond & Represents two electrons

B: Nonbonding electrons

C: Bonding electrons & Sigma bond

Sigma bonds, often known as bonds, are the strongest kind of covalent chemical bonding in chemistry. They are created by atomic orbitals directly overlapping one another. Using symmetry group terminology and techniques, sigma bonding for diatomic molecules is most easily defined.

Note that an electron that is not a part of chemical bonding is known as a non-bonding electron. The electron may be restricted to one atom in a lone pair. has the electron distributed throughout the molecule in a non-bonding orbital.

Learn more about Bonding electrons from

https://brainly.com/question/18258856

#SPJ1

Answer:B,C

Explanation:

Na⁺ and Br⁻ are the spectator ions in the reaction.

Those ions which do not participate in the chemical reaction and are present on both sides of the reaction i.e. reactants side and the products side are known as spectator ions. The reaction between aqueous hydrobromic acid and aqueous sodium hydroxide is as follows:

HBr (aq) + NaOH (aq)  → NaBr (aq) +  H₂O (l)

As clear from the above equation that HBr, NaOH and NaBr are completely ionized in water and the complete equation with ions is as follows:

H⁺ + Br⁻ + Na⁺ + OH⁻    → Na⁺ + Br⁻ + H₂O

So Na⁺ and Br⁻  are the ions which are taking part in the reaction and also present on both sides of the arrow so these two ions are spectator ions.

To look more about spectator ions click here

brainly.com/question/28913274

#SPJ4

The work associated with the expansion of a gas is 481 atm. L.

When a gas expands at constant pressure than for a small change in volume dv work done is dw = p dv.

The volume changes from u to v at constant pressure p, then the work done is:

dw = p (v - u)

When the work is done by the system against external pressure then dw = pdv

w = [tex]\int\limits^v_u {p} \, dv[/tex]

So by calculating we get:

dw = 13( 79 - 42)

      = 13× 37

      = 481 atm. L

Therefore we get the work done in 481 atm. L.

To know more about the work done refer to the link given below:

https://brainly.com/question/25573309

#SPJ4

Copper(II) sulfate is pale blue (cyan) because it absorbs light in the red region of the spectrum.

Spectrophotometry is the branch of electromagnetic spectroscopy that deals with the quantitative measurement of reflectance or transmission properties of materials as a function of wavelength.

A method of measuring how much light a chemical absorbs by measuring the intensity of light as it passes through a sample solution. The basic principle behind spectrophotometry is that each compound absorbs or transmits light in a specific wavelength range.

Copper(II) sulfate solution appears blue because it actually absorbs red region of spectrum which is a complementary color of blue.

To know more about Spectrophotometry visit:

https://brainly.com/question/24183759

#SPJ4

Answer:

20

Explanation:

owls are 10 of anything 10x 2 =20

It seems as though the value of the owl is up to you though

Hopes this helps

The term that has more potential energy is  bird sitting on the roof of a skyscraper.

Due to its height above the ground, it has potential energy, and because it is moving, it has kinetic energy. Because of this, a bird in flight has both kinetic and potential energy.

Norte that Potential energy in physics is the energy that an item gets to retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.

Therefore, Higher objects have more potential energy since they will fall further. The gravitational potential energy is highest for the heavier of two objects at the same height.

Learn more about potential energy from

https://brainly.com/question/13997830
#SPJ1

According to the given statement 1.24 M was the concentration of the hcl solution.

One of the main tools for connecting, managing, and running networked enterprise applications in a failover clustering infrastructure is a hyper - converged architecture (HCI) solution (HCI). Organizations may virtualize data, servers, and networks thanks to technology.

The balanced reaction is 2 HCl + Na₂CO₃ ==> CO₂ + H₂O + 2 NaCl

This shows that each mole of CO₂ created results in

There are two moles of HCl needed. So, starting with the atomic weights of carbon and oxygen, let's determine how many moles of CO₂ were produced.

Atomic weight carbon = 12.0107

Atomic weight oxygen = 15.999

Molar mass CO₂

= 12.0107 + 2 * 15.999

= 44.0087 g/mol

Moles CO₂ = 15.1 g / 44.0087 g/mol = 0.388559535 moles

We know we needed twice as much HCl based on the balanced equation,

so 0.388559535 mol * 2 = 0.77711907 mol

Simply divide the amount of moles by the number of liters because molarity is defined as moles per liter,

so: 0.77711907  mol / 0.625 l = 1.24339051 mol/l

Since our data only has three significant figures, round it to three figures to get 1.24 m.

To know more about HCl solution visit:

https://brainly.com/question/3339706

#SPJ4

To make 2.00 l of 2.00 m HCl solution by dilution with water, the volume of 10.0 m HCl needed is 0.4 l.

Dilution is defined as the process in which the concentration of a sample is decreased by adding more solvent. The dilution formula is given below.

C₁V₁ = C₂V₂

where C₁ = initial concentration of sample = 10.0 m

V₁ = initial volume of sample

C₂ = final concentration after dilution = 2.00 m

V₂ = total final volume after dilution = 2.00 l

Plug in the values to the formula and solve for the volume of the solution needed.

V₁ = C₂V₂/C₁

V₁ = (2.00 m)(2.00 l)/(10.0 m)

V₁ = 0.4 l

Learn more about dilution here: brainly.com/question/1615979

#SPJ4

Answer:

Explanation:

This practical can be used to introduce the idea that the relative amounts of a fuel and oxygen (from air) are important in combustion, and that there will be an optimum ratio in which the two substances react. This leads on to the idea of chemical equations.

In the case of a class experiment, where students generate the hydrogen themselves under strict supervision, all the hydrogen generators must be collected once the test tubes have been filled and before any flames are lit, to prevent the possibility of accidental or deliberate ignition of the hydrogen in the generator. This has caused a number of accidents in the past. Alternatively the test tubes could be filled with hydrogen beforehand, or by students under supervision, from a steady cylinder supply.

The rotational spectroscopy looks like many peaks joined together in the shape of parabola. The number of peaks depends on the shape of the molecule. The peaks are 2B distance apart from each other.

What is rotational spectroscopy?

Rotational spectroscopy is an absorption spectroscopy where the energies of transitions between the energy levels of a molecule in the gas is measured. It is also called as microwave spectroscopy. Rotational spectroscopy only works on the molecules which have permanent dipole moment.

In rotational spectroscopy each line represents a transition between energy levels.

E = BJ (J+1)  

where J = energy level, B = rotational constant.

When the transition is from J = 0 to J = 1,

E = E(f) - E(i) = B x 1 (1+1) - B x 0 (0+1) = 2B - 0B = 2B.

Therefore, the spacing between the peaks in Rotational spectroscopy is 2B. The number of peaks depends on the shape of the particular molecule.

To learn more about Rotational spectroscopy click on the link below https://brainly.com/question/28215058

#SPJ4

The value of the mass (B) will be equal to 9 grams and volume (D) will be equal to 5 cm^{3}.

What is density ?

Density is the degree of ways much “stuff” is in a given quantity of space. For example, a block of the heavier detail lead could be denser than the softer, lighter detail gold (Au). A block of Styrofoam is much less dense than a brick. It is described as mass in line with unit volume.

You can consider it, as how tightly or loosely packed a substance is, or how compact it is. Solids are commonly denser than beverages, and beverages denser than gases, however there are numerous exceptions.

Density is a bodily assets of matter, as every detail and compound has a completely unique density related to it. Density described in a qualitative way because the degree of the relative "heaviness" of gadgets with a regular volume.

Copper's Density is nearly equal to 9 and density is equal to mass/volume.

To learn more about the Density , click the given link

https://brainly.com/question/406690

#SPJ1

At 14.52 K, the population of the first energy level is 1/e times that of the ground state.

Temperature and the energy difference between the levels affect the relative population of particles in certain rotating levels. The excitation of particles from one level to another is caused by a rise in temperature.

HCl has a rotational constant (B) of 10.59 cm⁻¹

Identify the ground state's and the first rotational level's energies.

The formula is used to calculate the energy of a rotational level.

E = hcBJ (J + 1)

Following is the calculation of the energy of the ground state (J = 0):

E = hcBJ (J + 1)

E = 6.626 * 10⁻³⁴ J s * 2.998 * 10¹⁰cm s⁻¹ * 10.59 cm⁻¹ * 1 (1 + 1)

E = 4.207 * 10⁻²² J

Using the provided formula, the population of rotational level J in comparison to the ground state is computed.

[tex]\frac{N_{j} }{N_{0} } = 2J + 1 [ \frac{-E_{j} }{_{e}k_{B}T }[/tex]         --- (I)

The J-level population is known as [tex]N_{j}[/tex]

N is the ground state's population.

The Boltzmann constant is [tex]k_{B}[/tex]

The temperature is T.

The answer to the query is

N₁ = 1 / e (N₀)

N₁ / N₀ = 1 / e      ⇒  (II)

Equate (I) and (II)

1 / e = [2 (1) + 1] [tex][ \frac{-E_{j} }{_{e}k_{B}T }][/tex]

1 / 2.718 = (3) (-4.207 * 10⁻²² J) / (1.381 * 10⁻²³ J K⁻¹ * T)

0.368 = 3 *  (-4.207 * 10⁻²² J) / (1.381 * 10⁻²³ J K⁻¹ * T)

0.368 = 3 * e (-30.46 K / T)

Simplifying the above expression:

0.368 = 3 * e (-30.46 K / T)

In 0.368 = In 3 + (-30.46 K / T)

-0.999 = 1.098 - (30.46 K / T)

(-30.46 K / T) = 1.098 + 0.999

Solving for T:

(30.46 K / T) = 1.098 + 0.999

(30.46 K / T) = 2.097

T = 30.46 K / 2.097

Therefore, 14.52 K is the temperature where the first energy level's population is 1/e times that of the ground state.

To know more about the Rotational level of the population, refer to this link:

https://brainly.com/question/18521017

#SPJ4

COMPLETE QUESTION:

At what temperature would the population of the first rotational level of HCl be 1/e times the population of the ground state? The rotational constant for HCl, B, is equal to 10.59 cm⁻¹

.

The heat (q) in kJ released with combustion of methanol using 801 grams of water and the change in temperature is 4.3 degree Celsius. the specific heat of water is 4.18 J/(g °C) is 14397.17 J.

given that :

The specific heat capacity is given as :

q = mc ΔT

where ,

m = mass = 801 g

c = specific heat capacity = 4.18 J/g °C

ΔT = change in temperature = 4.3  °C

q = heat = ?

now, by solving the values we get :

q = mc ΔT

q = 801 × 4.18 × 4.3

q = 14397.17 J

Thus, The heat (q) in kJ released with combustion of methanol using 801 grams of water and the change in temperature is 4.3 degree Celsius. the specific heat of water is 4.18 J/(g °C) is 14397.17 J.

To learn more about specific heat here

https://brainly.com/question/11297584

#SPJ4

A mixture of hydrogen gas and water vapor has a total pressure of 738 mm hg. if the partial pressure of water vapor is 17.5 mm hg,  the mole fraction of hydrogen in the mixture is 0.976 mol of hydrogen.

given that :

total pressure = 738 mmHg

partial pressure of water vapor = 17.5 mmHg

Total pressure = partial pressure of hydrogen +partial pressure water vapor

partial pressure hydrogen gas = total pressure-partial pressure water vapor

                                                 =  738 - 17.5

                                                = 720.5 mmHg

now the , the partial pressure is given as :

partial pressure of hydrogen gas = mole fraction × total pressure

mole fraction of hydrogen gas = partial pressure / total pressure

                                                 =   720.5 / 738

                                                 = 0.976 mol of hydrogen

Thus, A mixture of hydrogen gas and water vapor has a total pressure of 738 mm hg. if the partial pressure of water vapor is 17.5 mm hg,  the mole fraction of hydrogen in the mixture is 0.976 mol of hydrogen.

To learn more about partial pressure here

https://brainly.com/question/16260489

#SPJ4

The amount of oxygen formed when 6.54 grams ammonium perchlorate reacted is 0.89 grams.

The balanced chemical equation of the reaction of ammonium perchlorate is,

2NH₄ClO₄ → N₂ + Cl₂ + 2O₂ + 4H₂O

From the reaction it is clear that,

2 moles of ammonium perchlorate = 2 moles of oxygen

Moles of ammonium perchlorate = Moles of oxygen

Moles = Formed/reacted mass/molar mass.

Molar mass of Ammonium perchlorate is 117 g/mol.

Molar of oxygen is 16 g/mol.

Mass of NH₄ClO₄ is 6.54 grams.

Putting values,

6.54/117 = formed mass of oxygen/16

Formed mass of oxygen = 0.89 grams.

So, the mass of oxygen formed is 0.89 grams.

To know more about moles, visit,

https://brainly.com/question/15356425

#SPJ4

The oxidation numbers of the elements show us the number of electrons lost or gained which is traceable from the electron configuration which in turn depends on the group that the atom belongs to.

The oxidation number is the number of charges that an atom appears to have. We know that the elements that we find in the groups  IA through VIA only have a narrow range of oxidation numbers. This is because the oxidation numbers does depend on the number of electrons that the atom can be able to loose or gain at a time.

We know that each of the groups are known by the maximum number of electrons that can be found on the outermost shell of the atom. This is part of the electron configuration of the atom. Thus, if we know the group that an atom belongs to, we can at least tell the outer electron configuration of the atom because we know that all the atoms in that group have the same outer electron configuration.

Learn more about electron configuration:https://brainly.com/question/14283892

#SPJ1

The molarity of the solution is  0.264 M.

Molarity is the quantity of a substance in a certain volume of solution. Molarity is defined as the moles of a solute in line with the liters of an answer. Molarity is likewise referred to as the molar attention of a solution.

calculation:-

mass = 21 g

the molar mass of potassium phosphate = 212 g

moles = mass/ molar mass

          = 21 / 212

           = 0.099  

Volume = 375 ml =0.375 L

molarity = number of moles/volume in liter

           =   0.099 /  0.375 L

            = 0.264 M

Molar concentration is the degree of the concentration of a chemical species, especially of a solute in a solution, in terms of the amount of substance in step with the unit quantity of the answer. In chemistry, the maximum generally used unit for molarity is the number of moles per liter, having the unit image mol/L or mol/dm³ in SI unit.

Learn more about molarity here:-https://brainly.com/question/26873446

#SPJ4

The molarity or the molar concentration of the KOH solution is 0.18M.

The equation of reaction for KOH and HCl is,

KOH + HCl → KCl + H₂O

As we can see,

Moles of KOH = Moles of HCl.

We also know,

Moles = molarity x volume.

Molarity of KOH x Volume of KOH = Molarity of HCl x Volume of HCl

Volume of KOH is 25 ml.

Molarity of HCl is 0.212M.

Volume of HCl is 21.83 ml.

Putting values,

Molarity of KOH x 25 = 0.2120 x 21.83

Molarity of KOH = 0.18M.

The concentration of KOH solution is 0.18M/.

To know more about molarity, visit,

https://brainly.com/question/26255204

#SPJ4

Option C. Choice describes a couple of movement-reaction forces for the duration of the frenzy: The force of gravity on her body and the force of the wall on her feet.

Newton's laws of motion are 3 fundamental laws of classical mechanics that describe the connection between the motion of an object and the forces acting on it. those legal guidelines may be paraphrased as follows: A body stays at relaxation, or in movement at a steady speed in a straight line, unless acted upon through pressure.

Within the first regulation, an object will not alternate its motion unless pressure acts on it. inside the 2nd law, the force on an item is equal to its mass times its acceleration. inside the third law, when two objects interact, they practice forces on each other of identical value and opposite routes. Newton's 2nd regulation is one of the most important in all of physics. For a frame whose mass m is regular, it is able to be written inside the shape F = ma, in which F (pressure) and an (acceleration) are both vector quantities. If a body has a net force acting on it, its miles are multiplied in accordance with the equation.

Learn more about Newton's laws here:

https://brainly.com/question/25545050

#SPJ1

Answer:

C would be the nervous system reacting

If you wanted to know about the other answers:

A and D are the circulatory system since it's transporting stress hormones through the blood and the heart rate speeds up

B is the muscular and skeletal system since they are the ones that make your body move

The average atomic mass of iron Isotopes is 55.90 amu.

We know that because there is a phenomenon that we call isotopy, the average atomic mass of the elements is often not a whole number. The atoms of the elements tend to differ in the number of the neutrons that they posses. Thus isotopes are the atoms of the same elements that do not have the same number of neutrons.

We now have to obtain the relative atomic mass of the iron atom while taking note of the different isotopes that we gave in the atom as we can see.

We thus have;

(54 * 5.80/100) + (56 * 91.72/100) + (57 * 2.20/100) + (58 * 0.28​/100)

= 3.13 + 51.36 + 1.25 + 0.16

= 55.90 amu

The average atomic mass of the iron as we can see from the calculation that is based on the table is obtained as 55.90 amu.

Learn more about isotopes:https://brainly.com/question/11680817

#SPJ1

Answer:

You determine the valence electrons by using the Periodic Table.

Let's assume you're using a table that has the groups numbered 1-18.

The electron configurations of ions are those of the neutral atoms plus or minus a number of electrons equal to the charge on the ion.

The empirical formula of the compound is CH3O

What is Combustion ?

Combustion is an exothermic, high-temperature redox chemical reaction between a fuel (reductant) and an oxidant (usually oxygen in the atmosphere), producing oxidized, often gaseous, gases in a mixture called smoke. A shaped product is produced. Combustion does not always lead to fire, as the flame is only visible when the substance undergoing combustion is vaporized, but when this occurs, the flame is a characteristic indicator of the reaction. Activation energy must be overcome to initiate combustion (for example, by starting a fire using a lit match), but the heat of the flame provides enough energy to make the reaction self-sustaining can provide.

To know more about the Combustion , click the link given ;

https://brainly.com/question/13251946

#SPJ4

Common characteristic of the electronic configuration of neon and argon have is their complete outer shell.

Neon  (10)  - 1s2, 2s2, 2p6

Argon (20) - 1s2, 2s2, 2p6, 3s2, 3p6

as we can see both the configurations have an complete outer shell means their octet is complete. This is the common characteristic of both the elements.

The both of them lie in group 8A that is the noble gases or inert gas.

To know more about Noble gas click here:

https://brainly.com/question/7036466

#SPJ4

The molarity of the solution is 0.95M and the concentration of the Silver cation and the concentration of the acetate anion is also 0.95M.

The mass of the Silver Acetate dissolved in the water of volume 125 ml is 20 grams.

We can write the reaction of the dissolution of the Silver Acetate into water as,

CH₃COOAg = CH₃COO- + Ag+

It means that the concentration of the Silver cation and the Acetate anion is equal in the solution of water.

It means that the molarity of the solution will be equal to the concentration of the Silver cation and the concentration of the Acetate and iron in the water.

We know that the molarity of the solution is defined as the number of moles of solute per unit volume of the solution in litres.

Moles = mass/molar mass

Molar mass of the Silver Acetate is 166.91 g/mol.

The mass of silver Acetate dissolved is 20 grams.

So, the moles of silver Acetate is,

Moles = 20/166.91

Molarity of the solution,

Molarity = moles of silver acetate/volume of water

Molarity = 20/166.91 × 1000/125

Molarity  = 0.95

So, the molarity of the Silver Acetate solution is 0.95M.

The concentration of the Silver cation and the concentration of the Acetate anion will be same as that of the molarity of the solution.

To know more about molarity, visit,

https://brainly.com/question/17138838

#SPJ4

The molarity of a solution that is prepared by dissolving 15.5 g of NaOH in 1.50 L of solution is

The given values are,

volume = 1.50 L

weight of NaOH = 15.5 g

Mass NaOH= 40 g/mol

Therefore, moles of NaOH is = weight / mass

                                                 = 15.5 / 40

                                                 =  0.3875

We know,

Molarity= moles of NaOH / volume

             = 0.3875 / 1.50

             = 0.25833 M NaOH

Therefore, we get the molarity of this solution as 0.25833 M NaOH

Molarity is defined as the number of moles of solute dissolved in one liter of solution. Also called molarity and represented by the letter "M". Molarity formula M = n/v where M is the molarity n is the number of moles v is the total volume of the solution in liters.

Can learn more about molarity from https://brainly.com/question/14265481

#SPJ4

At room temperature 15 grams of zinc will occupy 2.10 cm3

What is density of an element?

When atoms occupy a specific volume of space, their mass and number are measured by the periodic table's element densities. The quantity of mass in a particular volume, commonly expressed as grams per cm3 or g/cm3, is the density, which is a measurement of the number of particles in a certain volume of a substance.

Given the mass of zinc is 15 grams.

The density of zinc in room temperature is 7.14 g/cm^3

Density = mass/ volume

Volume =  mass / density

Volume = 15/ 7.14 = 2.10 cm3

Hence, at room temperature 15 grams of zinc will occupy 2.10 cm3.

To know more about density of an element from the given link

https://brainly.com/question/3806781

#SPJ1

The specific heat of the object can be obtained as 1.3 J/Kg/°C.

We know that energy can neither be created nor destroyed. The meaning of this is that, when the object looses heat, the heat must be transferred to the water since the heat energy can not be lost.

Thus;

Heat lost by the object = Heat gained by water.

Let us denote the heat lost using a negative sign.

Then;

H = mcdT

H = heat lost/ gained

m = mass of the object

dT = temperature change

Then;

-(59 * c * (27.5 - 98)) = 150 * 4.18 * (27.5 - 19))

4159.5c = 5329.5

c = 5329.5/4159.5

c = 1.3 J/Kg/°C

Learn more about specific heat:https://brainly.com/question/28302909

#SPJ1