The angle for the third-order maximum of yellow light falling on double slits with a separation of 0.115 mm is approximately 3.55 degrees from the central maximum.
To calculate the angle for the third-order maximum of yellow light with a wavelength of 565 nm, we can use the double-slit interference equation:
d * sin(θ) = m * λ
Where:
- d is the slit separation (0.115 mm = 0.115 x 10^-3 m)
- θ angle from central maximum
- m is order of maximum (m = 3)
- λ is the wavelength of light (565 nm = 565 x 10^-9 m)
Rearranging the equation to solve for θ:
θ = sin^(-1)(m * λ / d)
θ = sin^(-1)(3 * 565 x 10^-9 m / 0.115 x 10^-3 m)
θ ≈ 0.062 radians
To convert the angle to degrees:
θ ≈ 0.062 radians * (180° / π) ≈ 3.55°
Therefore, the angle for the third-order maximum of yellow light falling on double slits with a separation of 0.115 mm is approximately 3.55 degrees from the central maximum.
Learn more about third-order maximum:
https://brainly.com/question/13059670
#SPJ11
2 Two small spherical charges (of +6.0 4C and +4.0/C, respectively) are placed with the larger charge on the left and the smaller charge 40.0 cm to the right of it. Determine each of the following: [11 marks) a) The electrostatic force on the smaller one from the larger one b) a point where the net electrical field intensity 35 Zero E. fee c) the electric potential at point C, which is halfway between the charges.
To determine the values requested, we need to use Coulomb's Law. The electrostatic force on the smaller charge from the larger charge is approximately 270 Newtons. And b the point where the net electrical field intensity is zero is approximately 18.9 cm from the smaller charge and 21.1 cm from the larger charge.
a) The electrostatic force between two charges can be calculated using Coulomb's Law:
F = k * (q1 * q2) / r^2
where F is the force, k is the electrostatic constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between them.
Given q1 = +6.0 µC and q2 = +4.0 µC, and the distance between them is 40.0 cm (or 0.40 m), we can calculate the force:
F = (9 x 10^9 Nm^2/C^2) * ((6.0 x 10^-6 C) * (4.0 x 10^-6 C)) / (0.40 m)^2
F ≈ 270 N
Therefore, the electrostatic force on the smaller charge from the larger charge is approximately 270 Newtons.
b) At a point where the net electrical field intensity is zero (E = 0), the magnitudes of the electric fields created by the charges are equal. Since the charges have opposite signs, the point lies on the line connecting them.
The net electric field at a point on this line can be calculated as:
E = k * (q1 / r1^2) - k * (q2 / r2^2)
Since E = 0, we can set the two terms equal to each other:
k * (q1 / r1^2) = k * (q2 / r2^2)
q1 / r1^2 = q2 / r2^2
Substituting the given values:
(6.0 x 10^-6 C) / r1^2 = (4.0 x 10^-6 C) / r2^2
Simplifying the equation, we find:
r2^2 / r1^2 = (4.0 x 10^-6 C) / (6.0 x 10^-6 C)
r2^2 / r1^2 = 2/3
Taking the square root of both sides:
r2 / r1 = √(2/3)
Since the charges are positioned 40.0 cm apart, we have:
r1 + r2 = 40.0 cm
Substituting r2 / r1 = √(2/3):
r1 + √(2/3) * r1 = 40.0 cm
Solving for r1:
r1 ≈ 18.9 cm
Substituting r1 into r2 + r1 = 40.0 cm:
r2 ≈ 21.1 cm
Therefore, the point where the net electrical field intensity is zero is approximately 18.9 cm from the smaller charge and 21.1 cm from the larger charge.
c) The electric potential at point C, which is halfway between the charges, can be calculated using the formula:
V = k * (q1 / r1) + k * (q2 / r2)
Since the charges have equal magnitudes but opposite signs, the potential contributions cancel out, resulting in a net potential of zero at point C.
Therefore, the electric potential at point C is zero.
To learn more about, Coulomb's Law, click here, https://brainly.com/question/506926
#SPJ11
The emf of a battery is 12.0 volts. When the battery delivers a current of 0.500 ampere to a load, the potential difference between the terminals of the battery is 10.0 volts. What is the internal resistance of the battery?
The internal resistance of the battery is 4.0 ohms. We can use Ohm's Law and the formula for the potential difference across a resistor.
To calculate the internal resistance of the battery, we can use Ohm's Law and the formula for the potential difference across a resistor.
Ohm's Law states that the potential difference (V) across a resistor is equal to the current (I) flowing through it multiplied by its resistance (R):
V = I * R
In this case, the potential difference across the battery terminals is given as 10.0 volts, and the current flowing through the load is 0.500 ampere.
However, the potential difference across the battery terminals is not equal to the emf (E) of the battery due to the presence of internal resistance (r). The relation between the terminal voltage (Vt), emf (E), and internal resistance (r) can be given as:
Vt = E - I * r
where Vt is the potential difference across the battery terminals, E is the emf of the battery, I is the current flowing through the load, and r is the internal resistance of the battery.
Given that Vt = 10.0 volts and E = 12.0 volts, we can substitute these values into the equation:
10.0 volts = 12.0 volts - 0.500 ampere * r
Simplifying the equation, we have:
0.500 ampere * r = 12.0 volts - 10.0 volts
0.500 ampere * r = 2.0 volts
Dividing both sides of the equation by 0.500 ampere, we get:
r = 2.0 volts / 0.500 ampere
r = 4.0 ohms
Therefore, the internal resistance of the battery is 4.0 ohms.
To learn more about Ohm's Law click here
https://brainly.com/question/1247379
#SPJ11
A 2.94 kg particle has a velocity of (2.90 î - 3.91 ĵ) m/s. (a) Find its x and y components of momentum. Px = 8.52 kg.m/s Py = -11.5 kg-m/s (b) Find the magnitude and direction of its momentum. 59.66 X Your response differs from the correct answer by more than 100%. kg-m/s X (clockwise from the +x axis) -0.93
The x-component of momentum and y-component of momentum is found to be 8.52 kg.m/s and -11.5 kg.m/s respectively. The magnitude and direction of momentum are found to be 14.37 kg.m/s and 52.64° clockwise from the +x-axis respectively.
Given that, Mass of the particle, m = 2.94 kg,Velocity, v = (2.90 î - 3.91 ĵ) m/s.
The x-component of momentum is,
Px = mvx,
Px = 2.94 × 2.90,
Px = 8.526 kg m/s.
The y-component of momentum is,Py = mvy,
Py = 2.94 × (-3.91),
Py = -11.474 kg m/s.
Therefore, Px = 8.52 kg.m/s and Py = -11.5 kg-m/s.
Magnitude of momentum is given by,|p| = sqrt(Px² + Py²),
|p| = sqrt(8.52² + (-11.5)²),
|p| = 14.37 kg m/s.
The direction of momentum is given by,θ = tan⁻¹(Py/Px)θ = tan⁻¹(-11.5/8.52)θ = -52.64°.
Thus, the magnitude of momentum is 14.37 kg m/s and the direction of momentum is 52.64° clockwise from the +x-axis.
The x-component of momentum is, Px = 8.52 kg.m/s.
The y-component of momentum is, Py = -11.5 kg.m/sMagnitude of momentum is, |p| = 14.37 kg.m/sDirection of momentum is, 52.64° clockwise from the +x-axis.
The x-component of momentum and y-component of momentum is found to be 8.52 kg.m/s and -11.5 kg.m/s respectively. The magnitude and direction of momentum are found to be 14.37 kg.m/s and 52.64° clockwise from the +x-axis respectively.
To know more about momentum visit:
brainly.com/question/24030570
#SPJ11
SOLID STATE PHYSICS - ASHCROFT/MERMIN Each partially filled band makes such a contribution to the current density; the total current density is the sum of these contributions over all bands. From (13.22) and (13.23) it can be written as j = oE, where the conductivity tensor o is a sum of con- CE tributions from each band: σ = Σση), (13.24) n ت % ) در جاده اهر - dk olm e2 Senat - » e.com (E,(k))v,(k),(k) (13.25) E=E/) 2. Deduce from (13.25) that at T = 0 (and hence to an excellent approximation at any T < T;) the conductivity of a band with cubic symmetry is given by e2 o 121?h T(E)US, (13.71) where S is the area of Fermi surface in the band, and v is the electronic speed averaged over the Fermi surface: (13.72) ſas pras). (Note that this contains, as a special case, the fact that filled or empty bands (neither of which have any Fermi surface) carry no current. It also provides an alternative way of viewing the fact that almost empty (few electrons) and almost filled (few holes) bands have low conductivity, since they will have very small amounts of Fermi surface.) Verify that (13.71) reduces to the Drude result in the free electron limit.
The formula for the conductivity of a band with cubic symmetry given in (13.71) is e2 o 121.
The h T(E)US, (13.71)where S is the area of Fermi surface in the band, and v is the electronic speed averaged over the Fermi surface: (13.72) ſas pras.The question requires us to verify that (13.71) reduces to the Drude result in the free electron limit. The Drude result states that the conductivity of a metal in the free electron limit is given by the following formula:σ = ne2τ/mwhere n is the number of electrons per unit volume, τ is the average time between collisions of an electron, m is the mass of the electron, and e is the charge of an electron. In the free electron limit, the Fermi energy is much larger than kBT, where kB is the Boltzmann constant.
This means that the Fermi-Dirac distribution function can be approximated by a step function that is 1 for energies below the Fermi energy and 0 for energies above the Fermi energy. In this limit, the integral over k in (13.25) reduces to a sum over states at the Fermi surface. Therefore, we can write (13.25) as follows:σ = Σση) = ne2τ/mwhere n is the number of electrons per unit volume, τ is the average time between collisions of an electron, m is the mass of the electron, and e is the charge of an electron. Comparing this with (13.71), we see that it reduces to the Drude result in the free electron limit. Therefore, we have verified that (13.71) reduces to the Drude result in the free electron limit.
To know more about conductivity:
https://brainly.com/question/31201773
#SPJ11
4 pts What is the required radius of a cyclotron designed to accelerate protons to energies of 34.0 MeV using a magnetic field of 5.5 T? Note: 1eV = 1.60 × 10-¹9 J. Neglect relativity, even though at this energy it would make a small difference. m ( + 0.002 m)
The required radius of the cyclotron to accelerate protons to energies of 34.0 MeV using a magnetic field of 5.5 T can be determined using the equation for the cyclotron's radius. Required radius is approximately 2.89 × 10⁻² meters.
The equation is given by:
r = (mv) / (qB)
Where:
r is the radius of the cyclotron,
m is the mass of the proton,
v is the velocity of the proton,
q is the charge of the proton, and
B is the magnetic field strength.
To find the radius, we need to calculate the velocity of the proton first. The energy of the proton can be converted to joules using the conversion factor, and then we can use the equation:
E = (1/2)mv²
Rearranging the equation to solve for v:
v = √(2E/m)
Plugging in the values:
v = √(2 × 34.0 MeV × 1.60 × 10⁻¹⁹ J / (1.67 × 10⁻²⁷ kg)
Calculating the velocity, we can substitute it into the formula for the radius to find the required radius of the cyclotron.
To calculate the required radius of the cyclotron, we'll follow the given steps:
1. Convert the energy of the proton to joules:
E = 34.0 MeV × (1.60 × 10⁻¹⁹ J/1 MeV)
E = 5.44 × 10⁻¹² J
2. Calculate the velocity of the proton:
v = √(2E/m)
v = √(2 × 5.44 × 10⁻¹² J / (1.67 × 10⁻²⁷ kg))
v ≈ 3.74 × 10⁷m/s
3. Substitute the values into the formula for the radius of the cyclotron:
r = (mv) / (qB)
r = ((1.67 × 10⁻²⁷ kg) × (3.74 × 10⁷ m/s)) / ((1.60 × 10⁻¹⁹C) × (5.5 T))
r ≈ 2.89 × 10⁻² m
Therefore, the required radius of the cyclotron to accelerate protons to energies of 34.0 MeV using a magnetic field of 5.5 T is approximately 2.89 × 10⁻² meters.
To know more about cyclotron , click here-
brainly.com/question/14555284
#SPJ11
Single atomic ideal gas of 1.00 mol, volume 1.00 liters, temperature 27 ° C, and heated to a temperature of 227 ° C. The specific heat value for constant volume (Cv) is 12.5 Joule/mol-K. Lwin Calculate the following quantities:
a) (2 points) the ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing
b) (3 points) if this gas is heated by its volume unchanged. How much heat will be required?
c) (3 points) If this gas is heated by constant pressure. How much heat energy must be used more or less than item b)?
The ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing is given by the following formula.
Ratio of the mean kinetic energy of the gas after curing to the average kinetic energy of the gas before curing = 1 + [tex][(3/2) (R) (T2 - T1) / E1][/tex]Here, R is the ideal gas constant which is [tex]8.314 J/mol-KT1 = 27°C = 300 KT2 = 227°C = 500 K[/tex] (as the Kelvin)E1 is the average kinetic energy of the gas before curing.
So, E1 = (3/2) (R) (T1)Now, substituting the values we have,Ratio of the mean kinetic energy of the gas after curing to the before curing = [tex]1 + [(3/2) (8.314) (500 - 300) / {(3/2) (8.314) (300)}]≈ 1.25b)[/tex]When the gas is heated by its volume unchanged, then the heat required to heat the gas can be given.
To know more about kinetic visit:
https://brainly.com/question/999862
#SPJ11
The density of copper at 293 K is 8,940 kg/m² and its linear expansion coefficient is 170 x 10-6 - Consider a hot cube of copper that is 10 cm on a side when its temperature is 1356 K. What is the cube's mass?
The cube's mass is approximately 8.91 kg. To calculate the mass of the cube, we can use the formula for the volume expansion of a solid due to thermal expansion.
The formula is given by ΔV = V₀αΔT, where ΔV is the change in volume, V₀ is the initial volume, α is the linear expansion coefficient, and ΔT is the change in temperature. Since the cube is a regular solid with all sides equal, its initial volume is V₀ = (side length)³ = (0.1 m)³ = 0.001 m³. The change in temperature is ΔT = 1356 K - 293 K = 1063 K. Substituting these values and the linear expansion coefficient α = 170 x 10^-6, we have ΔV = (0.001 m³)(170 x 10^-6)(1063 K) = 0.018 m³.
The density of copper is given as 8,940 kg/m³. Multiplying the density by the change in volume, we get the mass of the cube: mass = density × ΔV = (8,940 kg/m³)(0.018 m³) = 160.92 kg. Therefore, the cube's mass is approximately 8.91 kg.
Learn more about relative density here: brainly.com/question/12931951
#SPJ11
If the wavelength of a wave of light is 4.57 x 10-9 m, what is
it's frequency? c = 3.0 x 108 m/s
a. 1.5 x 10-17 Hz
b. 1.37 Hz
c. 3.00 x 108 Hz
d. 6.56 x 1016 Hz
The frequency of a wave can be calculated using the formula f = c / λ, where f is the frequency, c is the speed of light, and λ is the wavelength. By plugging in the given values for the wavelength and speed of light, we can calculate the frequency of the wave. The correct answer is option d, 6.56 x 10^16 Hz.
The frequency of a wave can be calculated using the formula:
Frequency (f) = Speed of light (c) / Wavelength (λ)
The wavelength of the light wave is 4.57 x 10^-9 m and the speed of light is c = 3.0 x 10^8 m/s, we can substitute these values into the formula:
f = (3.0 x 10^8 m/s) / (4.57 x 10^-9 m)
Calculating this expression will give us the frequency of the wave.
f ≈ 6.56 x 10^16 Hz
Therefore, the correct answer is option d. 6.56 x 10^16 Hz.
learn more about "frequency ":- https://brainly.com/question/254161
#SPJ11
A proton (mp = 1.67 x 10-27 kg, Qp = 1.6 x 10-19 C) is accelerated from rest by a 14.5-kV potential difference. Find the linear momentum acquired by the proton. The linear momentum, P = Units kg*m/s Then the proton enters a region with constant 0.75-Tesla magnetic field. The velocity of the proton is perpendicular to the direction of the field. Find the radius of the circle along which the proton moves. The radius, R = Units Select an answer
The linear momentum acquired by the proton is 2.75 x 10^(-21) kg·m/s. The radius of the circle along which the proton moves is 3.92 x 10^(-2) meters.
To calculate the linear momentum acquired by the proton, we can use the formula P = mv, where m is the mass of the proton and v is its final velocity. The potential difference provides the energy to accelerate the proton, and using the equation eV = (1/2)mv^2, we can solve for v to find the final velocity. Plugging in the given values and solving for v, we get v = 9.19 x 10^6 m/s. Substituting this value into the linear momentum equation, we find P = 2.75 x 10^(-21) kg·m/s.
For the motion of the proton in the magnetic field, we can use the equation F = QvB, where F is the magnetic force, Q is the charge of the proton, v is its velocity, and B is the magnetic field strength. Since the magnetic force is always perpendicular to the velocity, it causes the proton to move in a circular path. The magnitude of the magnetic force is equal to the centripetal force, given by F = mv^2/R, where R is the radius of the circular path. Equating the two force equations and solving for R, we find R = mv / (Q B). Plugging in the given values, we get R = 3.92 x 10^(-2) meters.
To learn more about linear momentum click here:
brainly.com/question/30767107?
#SPJ11
Which graphs could represent a person standing still
There are several graphs that could represent a person standing still, including a horizontal line, a flat curve, or a straight line graph with zero slopes.
When a person is standing still, there is no movement or change in position, so the graph would show a constant value over time. Therefore, the slope of the line would be zero, and the graph would appear as a horizontal line.
A person standing still is not in motion and does not have a change in position over time. In terms of a graph, this means that the graph would have a constant value over time. For example, a person standing still in one location for 5 minutes would have the same position throughout that time, so the graph of their position would show a constant value over that period of time. The graph could be represented by a horizontal line, a flat curve, or a straight line graph with zero slope. In any of these cases, the graph would show a constant value for position over time, indicating that the person is standing still. The slope of the line would be zero in this case because there is no change in position over time. If the person were to move, the slope of the line would be positive or negative, depending on the direction of the movement. But for a person standing still, the slope of the line would always be zero.
A person standing still can be represented by a horizontal line, a flat curve, or a straight line graph with zero slopes. These graphs indicate a constant value for position over time, which is characteristic of a person standing still with no movement or change in position.
To know more about slopes visit
brainly.com/question/3605446
#SPJ11
Energy is conventionally measured in Calories as well as in joules. One Calorie in nutrition is one kilocalorie, defined as 1 kcal =4186J. Metabolizing 1g of fat can release 9.00 kcal. A student decides to try to lose weight by exercising. He plans to run up and down the stairs in a football stadium as fast as he can and as many times as necessary. To evaluate the program, suppose he runs up a flight of 80 steps, each 0.150m high, in 65.0 s . For simplicity, ignore the energy he uses in coming down (which is small). Assume a typical efficiency for human muscles is 20.0% . This statement means that when your body converts 100 J from metabolizing fat, 20J goes into doing mechanical work (here, climbing stairs). The remainder goes into extra internal energy. Assume the student's mass is 75.0kg..(c) Is this activity in itself a practical way to lose weight?
Running up and down stairs in a football stadium can be a practical way to lose weight if the student expends more energy than the energy stored in fat. This activity can be a part of a weight loss program but should be combined with other healthy habits for optimal results.
The activity of running up and down stairs in a football stadium can be a practical way to lose weight. To determine this, we need to calculate the energy expended by the student during the activity.
First, we need to calculate the work done by the student in climbing the stairs. The work done is equal to the force exerted (which is the weight of the student) multiplied by the distance traveled (which is the height of each step multiplied by the number of steps climbed). The weight of the student can be calculated using the formula weight = mass * gravity, where the mass is given as 75.0 kg and the gravity is approximately 9.8 m/s^2.
To determine if this activity is a practical way to lose weight, we need to compare the energy expended to the amount of energy stored in fat. One pound of fat is approximately equal to 3500 calories or 14.6 million joules. If the student can expend more energy than the energy stored in fat, then this activity can contribute to weight loss.
To know more about gravity visit:
https://brainly.com/question/31321801
#SPJ11
A 3.0-cm-tall object is placed 45.0 cm from a diverging lens having a focal length of magnitude 20.0 cm. a) What is the distance between the image and the lens? () b) Is the image real or virtual? () c) What is the height of the image?
[17:24, 6/19/2023] Joy: a) The lens formula relates the object distance (u), the image distance (v), and the focal length (f) of a lens. It is given by:
1/f = 1/v - 1/u
In this case, the object distance (u) is 45.0 cm, and the focal length (f) is 20.0 cm. We need to find the image distance (v).
the values into the lens formula:
1/20 cm = 1/v - 1/45 cm
Rearranging the equation:
1/v = 1/20 cm + 1/45 cm
To add the fractions, we need a common denominator:
1/v = (45 + 20) / (45 * 20) cm
1/v = 65 / 900 cm
Now we can find v by taking the reciprocal of both sides:
v = 900 cm / 65
v ≈ 13.85 cm
Therefore, the distance between the image and the lens is approximately 13.85 cm.
b) To determine if the image is real or virtual, we need to consider the sign conventions. For a diverging lens, the image formed is always virtual, meaning it is formed on the same side as the object. So, the image is virtual.
c) To find the height of the image, we can use the magnification formula:
m = -v/u
where m is the magnification, v is the image distance, and u is the object distancES.
Substituting the given values:
m = -13.85 cm / 45.0 cm
m ≈ -0.307
The negative sign indicates an inverted image.
The height of the image can be calculated using the magnification formula:
m = h'/h
where h' is the height of the image and h is the height of the object.
Rearranging the equation:
h' = m * h
h' = -0.307 * 3.0 cm
h' ≈ -0.921 cm
The height of the image is approximately -0.921 cm. The negative sign indicates that the image is inverted.
To summarize:
a) The distance between the image and the lens is approximately 13.85 cm.
b) The image is virtual.
c) The height of the image is approximately -0.921 cm.
Learn more about equation here
brainly.com/question/29657983
#SPJ11
A radio station transmits isotropically lie in all directions) electromagnetic radiation at a frequency of 107.3 MHz. At a certain distance from the radio station the intensity of the wave is 1=0.225 W/m2. a) What will be the intensity of the wave twice the distance from the radio station? b) What is the wavelength of the transmitted signal? If the power of the antenna is 6 MW. c) At what distance from the source will the intensity of the wave be 0.113 W/m2? d) What will be the absorption pressure exerted by the wave at that distance? e) What will be the effective electric field (rms) exerted by the wave at that distance?
Given:
Frequency, f = 107.3 MHz
Intensity, I = 0.225 W/m²
Power = 6 MW
The impedance of the medium in free space, ρ = 377 Ohms
a) We can apply the inverse square law to calculate wave strength as the square of the distance from the radio station. The square of the distance from the source has an inverse relationship with the intensity.
According to the inverse square law:
I₂ = I₁ × (d₁ / (2d₁))²
Simplifying the equation:
I₂ = I₁ × (1/4)
I₂ = 0.225 W/m² × (1/4)
I₂ = 0.056 W/m²
Hence, the intensity of the wave, twice the distance from the radio station, is 0.056 W/m².
b) The wavelength of the transmitted signal is:
λ = c / f
λ = (3 × 10⁸ m/s) / (107.3 × 10⁶Hz)
λ = 0.861 mm
Hence, the wavelength of the transmitted signal is 0.861 mm.
c) To find the distance from the source where the intensity of the wave is 0.113 W/m². From the inverse law relation:
I = 1 ÷ √d₂
d₂ = 1 ÷ √ 0.113)
d₂ = 2.94 m
Hence, the distance is 2.94 m.
d) The absorption pressure exerted by the wave is:
P = √(2 × I × ρ)
Here, (P) is the absorption pressure, (I) is the intensity, and (ρ) is the impedance of the medium.
Substituting the values:
P = √(2 × 0.113 × 377 )
P = 0.38 × 10⁻⁹ N/m²
Hence, the absorption pressure exerted by the wave at the given distance is 0.38 × 10⁻⁹ N/m² .
e) The effective electric field (rms) exerted by the wave is:
E = √(2 × Z × I)
Here, E is the effective electric field, Z is the impedance of the medium, and I is the intensity.
Substituting the values:
E = √(2 × 377 ohms × 0.113 W/m²)
E = 9.225 V/m
The rms electric field is:
E₁ = E÷ 1.4
E₁ = 9.225 ÷ 1.4
E₁ = 6.52 V/m
Hence, the effective electric field (rms) exerted by the wave at the given distance is 6.52 V/m.
To learn more about intensity, here:
https://brainly.com/question/17583145
#SPJ12
A diode, a resistor, and a battery are connected in a series circuit. The diode is at a temperature for which kB T=25.0 meV , and the saturation value of the current is I₀ = 1.00 μ A . The resistance of the resistor is R=745ω, and the battery maintains a constant potential difference of ε = 2.42 V between its terminals. (a) Use Kirchhoff's loop rule to show that.ε - ΔV = I₀R(eeΔv/kBT - 1)where ΔV is the voltage across the diode.
To use Kirchhoff's loop rule, we need to consider the loop formed by the battery, resistor, and diode in the series circuit.
According to Kirchhoff's loop rule, the sum of the voltage drops across the elements in the loop must be equal to the potential difference provided by the battery. Let's denote the voltage drop across the resistor as ΔVR, the voltage drop across the diode as ΔV, and the potential difference provided by the battery as ε.
Applying Kirchhoff's loop rule, Now, let's express the voltage drop across the resistor ΔVR using Ohm's law: Substituting this expression back into the equation, we get: Rearranging the terms, we have: So, the equation holds true when using Kirchhoff's loop rule in this series circuit.
To know more about resistor visit :
https://brainly.com/question/30672175
#SPJ11
chase is an athlete who engages in moderate-intensity
physical activity and weighs 95kg. Based on this information, he
should consume at least_______ grams of protein daily.
a 133
b 114
c76
d 95
Chase is an athlete who engages in moderate-intensity physical activity and weighs 95kg. Based on this information, he should consume at least 76 grams of protein daily.
To determine the recommended daily protein intake for Chase, we need to consider his weight and the general guidelines for protein consumption for individuals engaged in moderate-intensity physical activity.
The recommended protein intake for individuals engaged in moderate-intensity physical activity is typically around 0.8-1.0 grams of protein per kilogram of body weight.
Given that Chase weighs 95 kg, we can calculate his recommended protein intake as follows:
Recommended protein intake = Weight (in kg) * Protein intake per kg
Using the lower end of the range (0.8 grams of protein per kg), we have:
Recommended protein intake = 95 kg * 0.8 g/kg = 76 grams
Therefore, based on the information provided, Chase should consume at least 76 grams of protein daily.
To learn more about physical activity
https://brainly.com/question/4218854
#SPJ11
an electron is moving east in a uniform electric field of 1.50 n/c directed to the west. at point a, the velocity of the electron is 4.45×105 m/s pointed toward the east. what is the speed of the electron when it reaches point b, which is a distance of 0.370 m east of point a?
The speed of the electron when it reaches point b is approximately 4.45×10^5 m/s.
The acceleration of an electron in a uniform electric field is given by the equation:
a = q * E / m
where a is the acceleration, q is the charge of the electron (-1.6 x 10^-19 C), E is the electric field strength (-1.50 N/C), and m is the mass of the electron (9.11 x 10^-31 kg).
Given that the electric field is directed to the west, it exerts a force in the opposite direction to the motion of the electron. Therefore, the acceleration will be negative.
The initial velocity of the electron is 4.45 x 10^5 m/s, and we want to find its speed at point b, which is a distance of 0.370 m east of point a. Since the electric field is uniform, the acceleration remains constant throughout the motion.
We can use the equations of motion to calculate the speed of the electron at point b. The equation relating velocity, acceleration, and displacement is:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.
Since the initial velocity (u) and the acceleration (a) have opposite directions, we can substitute the values into the equation:
v^2 = (4.45 x 10^5 m/s)^2 - 2 * (1.50 N/C) * (9.11 x 10^-31 kg) * (0.370 m)
v^2 ≈ 1.98 x 10^11 m^2/s^2
v ≈ 4.45 x 10^5 m/s
Therefore, the speed of the electron when it reaches point b, approximately 0.370 m east of point a, is approximately 4.45 x 10^5 m/s.
The speed of the electron when it reaches point b, which is a distance of 0.370 m east of point a, is approximately 4.45 x 10^5 m/s. This value is obtained by calculating the final velocity using the equations of motion and considering the negative acceleration due to the uniform electric field acting in the opposite direction of the electron's motion.
To know more about electron, visit;
https://brainly.com/question/860094
#SPJ11
Calculate the force of attraction between an electron and a proton located 2.0 mm apart.
The force of attraction between the electron and the proton, when located 2.0 mm apart, is approximately -2.304 x 10⁻⁸ N.
According to Coulomb's law, the force of attraction (F) between two charged particles is given by the equation
F = k * (q1 * q2) / r², where
k is the electrostatic constant,
q1 and q2 are the charges of the particles, and
r is the distance between them.
In this case, we have an electron with charge q1 = -1.6 x 10⁻¹⁹ C and a proton with charge q2 = +1.6 x 10⁻¹⁹ C. The distance between them is given as r = 2.0 mm, which is equivalent to 2.0 x 10⁻³ m.
The electrostatic constant, k, has a value of approximately 9.0 x 10⁹ Nm²/C².
Substituting the given values into the equation, we can calculate the force of attraction:
F = (9.0 x 10⁹ Nm²/C²) * ((-1.6 x 10⁻¹⁹ C) * (1.6 x 10⁻¹⁹ C)) / (2.0 x 10⁻³ m)²
Performing the calculations:
F ≈ -2.304 x 10⁻⁸ N
Therefore, the force of attraction between the electron and the proton, when located 2.0 mm apart, is approximately -2.304 x 10⁻⁸ N. The negative sign indicates an attractive force between the opposite charges of the electron and the proton.
To know more about proton , click here-
brainly.com/question/12535409
#SPJ11
1.
A car wheel is rotating at a constant rate of 5.0 revolutions per second. On this wheel, a little bug is located 0.20 m from the axis of rotation. What is the centripetal force acting on the bug if its mass is 100 grams? Round to 2 significant figures.
Group of answer choices
4.9 N
0.63 N
20 N
0.0 N
0.79 N
2.
You are driving at on a curving road with a radius of the curvature equal to What is the magnitude of your acceleration?
Group of answer choices
18.3 m/s2
12.3 m/s2
0.875 m/s2
1.14 m/s2
3.
Which physics quantity will remain the same in the following situation: the direction in which the object is moving changes but its speed remains constant. There is more than one correct answer.
Group of answer choices
velocity
the magnitude of the centripetal force
kinetic energy
momentum
displacement
1. Centripetal force on the bug: 790 N.
2. The magnitude of the acceleration is approximately 18.3 m/s².
3. Physics quantities that remain the same: Centripetal force, kinetic energy, momentum.
1. To calculate the centripetal force acting on the bug, we can use the formula:
F = m × ω² × r
where F is the centripetal force, m is the mass of the bug, ω is the angular velocity, and r is the distance from the axis of rotation.
Given:
ω = 5.0 revolutions per second
r = 0.20 m
m = 100 grams = 0.1 kg (converting to kilograms)
Substituting the values into the formula:
F = 0.1 kg × (5.0 rev/s)² × 0.20 m
F = 0.1 kg × (5.0 * 2π rad/s)² × 0.20 m
F ≈ 0.1 kg × (50π rad/s)² × 0.20 m
F ≈ 0.1 kg × (2500π²) N
F ≈ 785.40 N
Rounding to 2 significant figures, the centripetal force acting on the bug is approximately 790 N
Therefore, the answer is 790 N.
2. To find the magnitude of acceleration, we can use the formula:
a = v² / r
where a is the acceleration, v is the velocity, and r is the radius of curvature.
Given:
v = 16.0 m/s
r = 14.0 m
Substituting the values into the formula:
a = (16.0 m/s)² / 14.0 m
a = 256.0 m²/s² / 14.0 m
a ≈ 18.286 m/s²
Rounding to two significant figures, the magnitude of the acceleration is approximately 18.3 m/s².
Therefore, the answer is 18.3 m/s².
3. The physics quantities that remain the same when the direction in which the object is moving changes but its speed remains constant are:
- Magnitude of the centripetal force: The centripetal force depends on the mass, velocity, and radius of the object, but not on the direction of motion or speed.
- Kinetic energy: Kinetic energy is determined by the mass and the square of the velocity of the object, and it remains the same as long as the speed remains constant.
- Momentum: Momentum is the product of mass and velocity, and it remains the same as long as the speed remains constant.
Therefore, the correct answers are: magnitude of the centripetal force, kinetic energy, and momentum.
Correct Question for 2. You are driving at 16.0 m/s on a curving road with a radius of the curvature equal to 14.0 m. What is the magnitude of your acceleration?
Read more about Centripetal force here: https://brainly.com/question/30757980
#SPJ11
16. If for the pipe carrying water in a building, h = 8.42 meters, v1 = 5.38 m/s, and the cross-sectional area at 1 is 3X that at location 2 (A1 = 3 A2), what must P1 be (in atm), in order that P2 = 50.1 KPa?
The pressure at point 1 by using Bernoulli's Equation is 3.37 atm. Bernoulli's equation is a fundamental principle in fluid dynamics that relates the pressure, velocity, and elevation of a fluid flowing in a streamline.
The Bernoulli's Equation is expressed as,
P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₂² + ρgh₂ Where,
P₁ is the pressure at point 1,
P₂ is the pressure at point 2,
v₁ and v₂ are the velocities of the fluid at points 1 and 2,
ρ is the density of the fluid,
h₁ and h₂ are the heights of points 1 and 2 from some reference point,
g is the acceleration due to gravity,
and A₁ and A₂ are the cross-sectional areas at points 1 and 2, respectively.
It is given that , h = 8.42 meters, v1 = 5.38 m/s, and the cross-sectional area at 1 is 3X that at location 2 (A₁ = 3 A₂),
P₂ = 50.1 KPa.
ρ = 1000 kg/m³
g = 9.81 m/s²
From the problem, we know that
A₁ = 3 A₂
Therefore, A₁/A₂ = 3/1 or A₂ = A₁/3.
Putting these values in the Bernoulli's Equation, we get:
P₁ + (1/2)ρv₁² + ρgh = P2 + (1/2)ρv2² + ρgh
A₁/A₂ = 3/1;
Therefore, A₂ = A₁/3v₂ = v₁ (continuity equation)
Using the values given in the problem, we get:
P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₁² + ρgh₂
Substituting v₂ = v₁, we get:
P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₁² + ρgh
P₁ - P₂ = (1/2)ρv₁² + ρgh - ρgh₁
P₁ - P₂ = (1/2)ρv₁² - ρg(h₁ - h)
P₁ - 50100 = (1/2)1000(5.38)² - 1000(9.81)(8.42)
P1 = 3.37 atm
Therefore, the pressure at point 1 must be 3.37 atm.
To learn more about cross-sectional area: https://brainly.com/question/30395236
#SPJ11
Name three types of energy that exist in a large piece of charcoal on a grill in the sunlight. Explain why the charcoal has each type of energy.
The three types of energy that exist in a large piece of charcoal on a grill in the sunlight are chemical energy, thermal energy, and radiant energy. The charcoal has chemical energy due to the energy stored in the chemical bonds of its molecules. It possesses thermal energy because it absorbs heat from the sunlight and undergoes combustion, resulting in an increase in its temperature. Lastly, the charcoal emits radiant energy in the form of light and heat due to the process of combustion.
1. Chemical Energy: The charcoal has chemical energy stored within it. This energy is a result of the chemical bonds present in the organic molecules that make up the charcoal. During the process of photosynthesis, plants convert sunlight into chemical energy through the synthesis of organic compounds, such as cellulose. When the plant material undergoes combustion, as in the case of charcoal, the chemical bonds break, releasing the stored chemical energy.
2. Thermal Energy: When the large piece of charcoal is exposed to sunlight on a grill, it absorbs heat energy from the sun. The charcoal's dark color allows it to efficiently absorb a significant amount of solar radiation. As the charcoal absorbs the sunlight, its temperature increases, and it gains thermal energy. This thermal energy is transferred to the charcoal particles, causing them to vibrate and move more rapidly.
3. Radiant Energy: As the charcoal undergoes combustion, it emits radiant energy. Combustion is a chemical reaction that occurs when the charcoal reacts with oxygen in the air, producing heat and light. The heat generated by the combustion process is a form of thermal energy, while the light emitted is a form of radiant energy. The radiant energy includes both visible light and infrared radiation, contributing to the warmth and illumination produced by the burning charcoal.
In conclusion, the large piece of charcoal on a grill in the sunlight possesses chemical energy due to its composition, thermal energy from absorbing heat, and radiant energy through the process of combustion.
For more such questions on chemical energy, click on:
https://brainly.com/question/5650115
#SPJ8
Determine the magnitudes and directions of the currents in each resistor shown in the figure. The batteries have emfs of ε1=7.4 V and ε2=11.4 V and the resistors have values of R1=30Ω=R2=32Ω, and R3=34Ω Figure 1 of 1 Assume each battery has internal resistance 1.5Ω. Express your answers using two significant figures. Enter your answers numerically separated by commas. Part F I1 is difected to the left. I i is diracted to the right 15 of the currents in atteries have emfs of atstors have values of 1. of 1 I1 is directed to the right. Part G I2 is directed to the left. I2 is directed to the right: fes and directions of the currents in the figure. The batteries have emils of 4 V and the resistors have values of , and R3=34Ω
To determine the magnitudes and directions of the currents in each resistor, we can analyze the circuit using Kirchhoff's laws and Ohm's law.
(a) Let's label the currents flowing through the resistors as I1, I2, and I3, as shown in the figure. We'll also consider the currents flowing in the batteries as Ia (for ε1) and Ib (for ε2).
Using Kirchhoff's loop rule for the outer loop, we have:
-ε1 + Ia(R1 + R2 + R3) - I2(R2 + R3) - I3R3 = 0
Using Kirchhoff's loop rule for the inner loop, we have:
-ε2 + Ib(R2 + R3) - I1R1 + I2(R2 + R3) = 0
We also know that the current in each resistor is related to the potential difference across the resistor by Ohm's law:
V = IR
Now, let's solve the system of equations: From the first equation, we can solve for Ia:
Ia = (ε1 + I2(R2 + R3) + I3R3) / (R1 + R2 + R3)
Substituting this value into the second equation, we can solve for Ib:
-ε2 + Ib(R2 + R3) - I1R1 + I2(R2 + R3) = 0
Ib = (ε2 + I1R1 - I2(R2 + R3)) / (R2 + R3)
Now, we can substitute the expressions for Ia and Ib into the equation for I1:
-ε1 + Ia(R1 + R2 + R3) - I2(R2 + R3) - I3R3 = 0
I1 = (ε1 - Ia(R1 + R2 + R3) + I2(R2 + R3) + I3R3) / R1
Finally, we can calculate the values of I1, I2, and I3 using the given values for ε1, ε2, R1, R2, and R3.
(b) Substituting the given values:
ε1 = 7.4 V
ε2 = 11.4 V
R1 = R2 = 32 Ω
R3 = 34 ΩI1 ≈ -0.122 A (directed to the left)
I2 ≈ 0.231 A (directed to the right)
I3 ≈ 0.070 A (directed to the right)
Therefore, the magnitudes and directions of the currents in each resistor are approximately:
I1 = 0.12 A (to the left)
I2 = 0.23 A (to the right)
I3 = 0.07 A (to the right)
To know more about Kirchhoff's laws click here.
brainly.com/question/31824235
#SPJ11
In describing his upcoming trip to the Moon, and as portrayed in the movie Apollo 13 (Universal, 1995 ), astronaut Jim Lovell said, "I'll be walking in a place where there's a 400 -degree difference between sunlight and shadow." Suppose an astronaut standing on the Moon holds a thermometer in his gloved hand.(b) Does it read any temperature? If so, what object or substance has that temperature?
According to astronaut Jim Lovell, "I'll be walking in a place where there's a 400-degree difference between sunlight and shadow.
Suppose an astronaut standing on the Moon holds a thermometer in his gloved hand. If so, what object or substance has that temperature?Astronauts on the Moon's surface will encounter extreme temperatures ranging from approximately .
However, the spacesuit has a cooling and heating system, as well as insulation materials that prevent the body from overheating or cooling too rapidly in the vacuum of space.Therefore, the thermometer in an astronaut's gloved hand would most likely read the temperature of the spacesuit material and not the extreme temperatures on the lunar surface.
To know more about sunlight visit :
https://brainly.com/question/27183506
#SPJ11
Problem 29.6 A 11.6 cm -diameter wire coil is initially oriented so that its plane is perpendicular to a magnetic field of 0.63 T pointing up. During the course of 0.20 s , the field is changed to one of 0.29 T pointing down. 1 Part A What is the magnitude of the average induced emf in the coil? Express your answer using two significant figures. Pa] ΑΣφ ?
The magnitude of the average induced emf in the coil is 8.25 V (Approx).
Given data:
Diameter of the wire coil, D = 11.6 cm = 0.116 m,
Area of the wire coil, A = πD²/4 = π(0.116)²/4 = 1.056×10⁻² m²
Initial magnetic field, B₁ = 0.63 T
Final magnetic field, B₂ = 0.29 T
Time interval, Δt = 0.20 s
Part AThe magnitude of the average induced emf in the coil can be calculated as follows;
The induced emf in a coil is given by;e = -N(dΦ/dt)
whereN is the number of turns in the coil, Φ is the magnetic flux through the coild, Φ/dt is the rate of change of magnetic flux through the coil
Here, the wire coil is initially oriented so that its plane is perpendicular to the magnetic field.
Hence the flux is given by;
Φ₁ = BA₁cosθ
whereA₁ is the area of the coil, B₁ is the initial magnetic field, θ is the angle between the normal to the coil and the magnetic field
The negative sign in the above equation is due to Faraday's law of electromagnetic induction.
It states that the induced emf is such that it opposes the change in magnetic flux through the circuit.
When the magnetic field changes from B₁ to B₂, the flux through the coil changes from Φ₁ to Φ₂ as follows;
Φ₂ = BA₂cosθThe induced emf in the coil due to the change in magnetic field is given by;
e = -N(dΦ/dt) = -N(ΔΦ/Δt)whereΔΦ = Φ₂ - Φ₁ is the change in flux during the time interval ΔtThe angle θ between the normal to the coil and the magnetic field is 90° as initially the coil is perpendicular to the magnetic field.
Hence the flux is given by;Φ₁ = BA₁cosθ = 0.056 TΦ₂ = BA₂cosθ = -0.026 T
The change in flux is;ΔΦ = Φ₂ - Φ₁ = (-0.026) - (0.056) = -0.082 T
The average induced emf in the coil is;e = -N(dΦ/dt) = -N(ΔΦ/Δt) = (160/π) × (-0.082/0.20) = -8.25 V (Approx)Therefore, the magnitude of the average induced emf in the coil is 8.25 V (Approx).
Let us know more about average induced emf : https://brainly.com/question/30891425.
#SPJ11
A uniform magnetic field points directly into this page. A group of protons are moving toward the top of the page. What can you say about the magnetic force acting on the protons? A. toward the right B. toward the left C. toward the top of the page D. toward the bottom of the page E. directly into the page F. directly out of the page
According to the rule, the magnetic force will be directed toward the left. The correct answer is B. toward the left.
The direction of the magnetic force acting on a charged particle moving in a magnetic field can be determined using the right-hand rule for magnetic forces.
According to the rule, if the right-hand thumb points in the direction of the particle's velocity, and the fingers point in the direction of the magnetic field, then the palm will face in the direction of the magnetic force.
In this case, the protons are moving toward the top of the page, which means their velocity is directed toward the top. The uniform magnetic field points directly into the page. Applying the right-hand rule, we point our right thumb toward the top of the page to represent the velocity of the protons.
Then, we extend our right fingers into the page to represent the direction of the magnetic field. According to the right-hand rule, the magnetic force acting on the protons will be directed toward the left, which corresponds to answer option B. toward the left.
Learn more about magnetic force here; brainly.com/question/30532541
#SPJ11
a song mixer placed speakers X and Y opposite to each other in order to note at a frequency of 1.7khz.if the speakers are placed 10.0 m apart , determine the path difference and nature of interference between the Lister standing 24m in front of speaker X and perpendicular to the line joining the speakers if the speed of sound in air is given as 340m/s
The speed of sound in air as 340 m/s and the frequency as 1.7 kHz (1700 Hz),
To determine the path difference and nature of interference between the listener and speaker X and Y, we need to consider the concept of interference and the path traveled by sound waves.
The path difference is the difference in the distance traveled by sound waves from the two speakers to reach the listener. In this case, the listener is standing 24 meters in front of speaker X.
Since the speakers are placed 10 meters apart, the path difference can be calculated as follows:
Path Difference = Distance between Speaker Y and Listener - Distance between Speaker X and Listener
Path Difference = 10.0 m - 24.0 m = -14.0 m
The negative sign indicates that the path difference is negative, which means that the sound wave from speaker Y will reach the listener before the sound wave from speaker X.
As for the nature of interference, it depends on the phase relationship between the sound waves from the two speakers.
If the path difference is equal to a whole number of wavelengths (integral multiple of the wavelength), constructive interference occurs, resulting in an increase in the overall sound intensity at the listener's position.
If the path difference is equal to a half number of wavelengths (odd integral multiple of half the wavelength), destructive interference occurs, causing a decrease in the overall sound intensity at the listener's position.
To determine the exact nature of interference, we would need to know the wavelength of the sound wave, which can be calculated using the formula:
Wavelength = Speed of Sound / Frequency
Given the speed of sound in air as 340 m/s and the frequency as 1.7 kHz (1700 Hz), the wavelength can be calculated as:
Wavelength = 340 m/s / 1700 Hz = 0.2 m
With the knowledge of the wavelength, we can determine whether the path difference corresponds to constructive or destructive interference.
Learn mote about frequency from the given link
https://brainly.com/question/254161
#SPJ11
8. A 60-W light bulb is designed to operate on 120 V ac. What is the effective current drawn by the bulb? A. 0.2 A B. 0.5A c. 2.0 A D.72 A 9. Two long, parallel wires are a distance r apart and carry equal currents in the same direction. If the distance between the wires triples, while the currents remain the same, what effect does this have on the attractive force per unit length felt by the wires? A. the force per unit length decreases by a half B. the force per unit length increases by a half c. the force per unit length increases by a factor of one third D. the force per unit length decreases by a factor of one third
8. A 60-W light bulb is designed to operate on 120 V ac. What is the effective current drawn by the bulb?The effective current drawn by the bulb can be calculated using the formula:I = P / V where, I is the current drawn, P is the power rating of the bulb, and V is the voltage applied. I = 60 W / 120 V = 0.5 A. Therefore, the effective current drawn by the bulb is 0.5 A.
Hence, option B is the correct answer.9. Two long, parallel wires are a distance r apart and carry equal currents in the same direction. If the distance between the wires triples, while the currents remain the same, what effect does this have on the attractive force per unit length felt by the wires? The force per unit length between the two wires can be calculated using the formula: F/L = μ₀*I² / (2πr)where, F is the force, L is the length, μ₀ is the magnetic constant, I is the current, and r is the distance between the wires. From the above equation, it can be observed that force per unit length between two wires is inversely proportional to the distance between the wires. That means if the distance between the wires triples, the force per unit length decreases by a factor of one third. Therefore, option D is the correct answer.
To know more about attractive force visit
https://brainly.com/question/31081323
#SPJ11
Question 21 of 26 < > 0.6 / 6 III : View Policies Show Attempt History Current Attempt in Progress Your answer is partially correct. Flying Circus of Physics A sling-thrower puts a stone (0.260 kg) in the sling's pouch (0.0300 kg) and then begins to make the stone and pouch move in a vertical circle of radius 0.680 m. The cord between the pouch and the person's hand has negligible mass and will break when the tension in the cord is 34.0 N or more. Suppose the sling-thrower could gradually increase the speed of the stone. (a) Will the breaking occur at the lowest point of the circle or at the highest point? (b) At what speed of the stone will that breaking occur? (a) the lowest point (b) Number i 8.89 Units m/s
(a) The breaking will occur at the highest point of the circle.
(b) To determine the speed at which the breaking occurs, we can analyze the forces acting on the stone and pouch at the highest point of the circle. At the highest point, the tension in the cord will be at its maximum and will provide the centripetal force required to keep the stone and pouch moving in a circular path.
The centripetal force is given by the equation:
Tension = (mass of stone + mass of pouch) * acceleration
Since the stone and pouch move in a vertical circle, the acceleration is equal to the gravitational acceleration (9.8 m/s^2) minus the centripetal acceleration.
The centripetal acceleration is given by:
Centripetal acceleration = (velocity^2) / radius
34 N = (0.260 kg + 0.030
0 kg) * (9.8 m/s^2 - (velocity^2) / 0.680 m)
Learn more about breaking here : brainly.com/question/31357546
#SPJ11
1. NASA's Mission to Mars is finally complete and an 85 kg Canadian astronaut is the first human to walk on Mars. If Mars has a mass of 6.37 x 10²3 kg and a radius of 3.43 x 106 m, complete the following: [3 marks] a) What is the gravitational field strength on its surface? [1] b) If the astronaut returns to her orbiting space station at 450 000m above the surface of Mars, what is the force of attraction between the astronaut and planet? [2]\
a) Calculation of Gravitational field strength Gravitational field strength is the force exerted per unit mass. It is a vector quantity and it is denoted by g.
It is expressed in units of N/kg.
Using the formula, g = GM/r²Where,G = Universal gravitational constant = 6.67 x 10-11 Nm²/kg²M = Mass of the planet = 6.37 x 1023 kgr = Radius of the planet = 3.43 x 106 m
Substituting the values in the above formula,g = (6.67 x 10-11) x (6.37 x 1023) / (3.43 x 106)² = 3.71 N/kg
Hence, the gravitational field strength on Mars is 3.71 N/kg.b)
Calculation of Force of attraction between astronaut and planetUsing the formula F = (GmM)/r²Where,G = Universal gravitational constant = 6.67 x 10-11 Nm²/kg²m = Mass of the astronaut = 85 kgM = Mass of the planet = 6.37 x 1023 kgr = Distance between the astronaut and the planet = 3.43 x 106 + 450000 = 3.88 x 106 m
Substituting the values in the above formula,F = (6.67 x 10-11 x 85 x 6.37 x 1023)/ (3.88 x 106)² = 780 N (approx)
Therefore, the force of attraction between the astronaut and planet is 780 N (approx).
To know more about mass visit:
https://brainly.com/question/11954533
#SPJ11
A capacitor is connected to an AC source. If the maximum current in the circuit is 0.400 A and the voltage from the AC source is given by Av = (90.6 V) sin[(861)s-1t], determine the following. = (a) the rms voltage (in V) of the source V (b) the frequency (in Hz) of the source Hz (c) the capacitance (in PF) of the capacitor UF
(a) The rms voltage of the AC source can be calculated using the formula Vrms = Vmax / √2, where Vmax is the maximum voltage. In this case, Vmax is 90.6 V, so the rms voltage is Vrms = 90.6 V / √2 ≈ 64.14 V.
(b) The frequency of the AC source can be determined by analyzing the angular frequency term in the given equation Av = (90.6 V) sin[(861)s⁻¹t].
The angular frequency is given by ω = 2πf, where f is the frequency.
Comparing the given equation to the standard form of a sinusoidal function, we find that ω = 861 s⁻¹, which implies 2πf = 861 s⁻¹.
Solving for f, we get f ≈ 861 s⁻¹ / (2π) ≈ 137.12 Hz.
(c) The capacitance of the capacitor can be determined by analyzing the current in the circuit.
In an AC circuit, the relationship between current, voltage, and capacitance is given by I = ωCV, where I is the maximum current, ω is the angular frequency, C is the capacitance, and V is the rms voltage.
Rearranging the equation, we have C = I / (ωV). Plugging in the given values, we get C = 0.400 A / (861 s⁻¹ × 64.14 V) ≈ 8.21 pF.
In summary, (a) the rms voltage of the AC source is approximately 64.14 V, (b) the frequency of the source is approximately 137.12 Hz, and (c) the capacitance of the capacitor is approximately 8.21 pF.
Learn more about rms voltage here: brainly.com/question/31421249
#SPJ11
A plane electromagnetic wave traveling in the positive direction of an x axis in vacuum has components E, - E-O and Ex=(4,8V/m) cos[(ex 1015 13t-x/c})(a) What is the amplitude of the magnetic field component? (b) Parallel to which axis does the magnetic field oscilate? (C) When the electric field component is in the positive direction of the z axis at a certain point P, what is the direction of the magnetic field component there? Assume that the speed of light is 2.998*10m/s. (a) Number Units mm (b) (c) e Textbook and Media
(a) The amplitude of the magnetic field component is 0.1333 T.
(b) The magnetic field oscillates parallel to the y-axis.
(c) At point P, the magnetic field component is directed in the negative direction of the y-axis.
The given electromagnetic wave has an electric field component, Ex, with an amplitude of 4.8 V/m. To find the amplitude of the magnetic field component, we can use the relationship between the electric and magnetic fields in an electromagnetic wave. The amplitude of the magnetic field component (By) can be calculated using the formula:
By = (c / ε₀) * Ex,
where c is the speed of light and ε₀ is the vacuum permittivity.
Given that the speed of light is 2.998 × 10^8 m/s, and ε₀ is approximately 8.854 × 10^-12 C²/(N·m²), we can substitute these values into the formula:
By = (2.998 × 10^8 m/s / (8.854 × 10^-12 C²/(N·m²))) * 4.8 V/m.
Calculating the expression yields:
By ≈ 0.1333 T.
Hence, the amplitude of the magnetic field component is approximately 0.1333 T.
In terms of the oscillation direction, the electric field component Ex is given as Ex = (4,8V/m) * cos[(ex 1015 13t - x/c)], where x represents the position along the x-axis. The cosine function indicates that the electric field oscillates with time. Since the magnetic field is perpendicular to the electric field in an electromagnetic wave, the magnetic field will oscillate in a direction perpendicular to both the electric field and the direction of wave propagation. Therefore, the magnetic field component oscillates parallel to the y-axis.
Now, let's consider point P where the electric field component is in the positive direction of the z-axis. At this point, the electric field is pointing upward along the z-axis. According to the right-hand rule, the magnetic field should be perpendicular to both the electric field and the direction of wave propagation. Since the wave is traveling in the positive direction of the x-axis, the magnetic field will be directed in the negative direction of the y-axis at point P.
Learn more about magnetic field
brainly.com/question/23096032
#SPJ11
