Answer:
[tex]F=-8.2*10^{-8}N[/tex]
Explanation:
From the question we are told that:
Radius [tex]r=5.3*10^{-11}[/tex]
Where
Proton Charge [tex]q_1=1.6*10^{-19}C[/tex]
Charge of Electron [tex]q_2=-1.6*10^{-19}C[/tex]
Generally the equation for Coulomb's Law is mathematically given by
[tex]F=\frac{9*10^9(q_1)(q_2)}{r^2}[/tex]
[tex]F=\frac{9*10^9(1.6*10^{-19}C)(-1.6*10^{-19}C)}{5.3*10^{-11}}[/tex]
[tex]F=-8.2*10^{-8}N[/tex]
Which forms of energy determine temperature: translational kinetic energy, rotational kinetic energy, vibrational kinetic energy, or all of these
oh this question seems to be difficult I don't think I can answer this
How did the English bill of rights impact the colonists views of government?  A. It established a process by which people could petition the government. B.It stated that freedom of religion should be respected by the government. C. It declared people’s freedom of political speech. D. It asserted that a rulers power are limited by a separate branch of government.
Answer:
C. It declared people’s freedom of political speech.
Explanation:
The English bill of rights limited the king's power and increased the power of the population. This is because after the declaration of rights, the king should take into account the will of the people so that he could be kept in power. On that occasion, the people should have understood that the king was not an absolute liber and that they had more political freedom to express when they felt the country was not being managed properly. This freedom was also given to the colonists, making them see themselves as an active factor within English politics and not a subordinate factor to the king.
A screw Jack whose pitch is 2mm is used to raise a bus of mass 900kg through height of 20cm. The length of the Tommy of the Tommy of the jack is 40cm. Calculate the velocity ratio of the machine
R= 40cm —> R= 0.4 m
P= 2mm —> P= 0.002 m
[tex]V.R = \frac{2πR}{p} = \frac{2 \times 3.14 \times 0.4}{0.002} = 1256[/tex]
I think this is the answer
I hope I helped you
Good luck ^_^
Do you believe in aliens? And if so, what's your reasoning for believing in them?
Answer:
I believe in aliens but I do not think everyone should. I started to believe in aliens since the US government said they would be taking extraterrestrial life seriously. They will be in our lives sooner or later, so we shouldn't be ignoring their presence. I believe them because surveys show that nearly half of Americans believe that aliens have visited the Earth, either in the ancient past or recently. That percentage has been increasing. Belief in alien visitation is greater than belief that Bigfoot is a real creature, but less than belief that places can be haunted by spirits. Also there have been a lot of UFO sightings, and a Navy Jet has a video of that as well. These small things is just hard to ignore, and they make me and hopefully others believe in aliens.
The Sun's energy comes from which nuclear reaction?
Answer:
the sun energy comes from nuclea fution
A system has a pressure of 5 N/m2
If a force of 2000N is applied, what is the area that the force is applied to?
Give the units.
400 m2
Explanation:
Pressure = Force ÷ Area
5 N/m2 = 2000 N ÷ A
A = 2000 N ÷ 5
= 400 m2
If a force of 2000N is applied, the area that the force is applied to is 400 m²
What is force?The word "force" has a specific meaning in science. At this level, calling a force a push or a pull is entirely appropriate. A force is not something an object "has in it" or that it "contains."
One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.
The amount of force applied to a certain region is referred to as pressure. The force per unit area is called pressure. F in this condensed version of the equation stands in for the force, which is expressed in newtons.
Given that the pressure of 5 N/m²
Force is 2000N
Pressure = Force ÷ Area
5 N/m² = 2000 N ÷ A
A = 2000 N ÷ 5 = 400 m²
Therefore, the area that the force is applied to is 400 m².
To learn more about force, refer to the link:
https://brainly.com/question/19529052
#SPJ2
The acceleration of the car with two washers added to the string would be
Answer:
[tex]a=0.33\ m/s^2[/tex]
Explanation:
For washer 2,
v₁ = 0.13 m/s
v₂ = 0.36 m/s
t₁ = 1.92
t₂ = 2.61
We need to find the acceleration of waster 2.
[tex]a=\dfrac{v_2-v_1}{t_2-t_1}\\\\a=\dfrac{0.36-0.13}{2.61-1.92}\\\\a=\dfrac{0.23}{0.69}\\\\a=0.33\ m/s^2[/tex]
So, the acceleration of washer 2 is [tex]0.33\ m/s^2[/tex].
Answer:
.33
Explanation:
What is this?
Picture
Answer:
may be upside down alphabet :"T"
Explanation:
A squirrel jumps into the air with a velocity of 4 m/s at an angel of 50 degrees. What is the maximum height reached by the squirrel?
Answer:
Explanation:
Assuming the squirrel is jumping off the ground, here's what we know but don't really know...
v₀ = 4.0 at 50.0°
So that's not really the velocity we are looking for. We are dealing with a max height problem, which is a y-dimension thing. Therefore, we need the squirrel's upward velocity, which is NOT 4.0 m/s. We find it in the following way:
[tex]v_{0y}=4.0sin(50.0)[/tex] which gives us that the upward velocity is
v₀ = 3.1 m/s
Moving on here's what we also know:
a = -9.8 m/s/s and
v = 0
Remember that at the very top of the parabolic path, the final velocity is 0. In order to find the max height of the squirrel, we need to know how long it took him to get there. We are using 2 of our 3 one-dimensional equations in this problem. To find time:
v = v₀ + at and filling in:
0 = 3.1 - 9.8t and
-3.1 = -9.8t so
t = .32 seconds.
Now that we know how long it took him to get to the max height, we use that in our next one-dimensional equation:
Δx = [tex]v_0t+\frac{1}{2}at^2[/tex] and filling in:
Δx = [tex]3.1(.32)+\frac{1}{2}(-9.8)(.32)^2[/tex] and using the rules for adding and subtracting sig fig's correctly, we can begin to simplify this:
Δx = .99 - .50 so
Δx = .49 meters
How much current flows in the circuit if two resistors of 6 connected in parallel are
supplied with potential difference of 12 volts?
Answer:
4 A
Explanation:
Firstly we need to calculate the equivalent resistance. Since, two resistors of 6 connected in parallel, so equivalent resistance will be given by,
[tex]\longrightarrow[/tex] 1/R = 1/R1 + 1/R2
[tex]\longrightarrow[/tex] 1/R = (1/6 + 1/6) Ω
[tex]\longrightarrow[/tex] 1/R = (1 + 1)/6 Ω
[tex]\longrightarrow[/tex] 1/R = 2/6 Ω
[tex]\longrightarrow[/tex] R = 6/2 Ω
[tex]\longrightarrow[/tex] R = 3 Ω
We know that,
[tex]\longrightarrow[/tex] V = IR
V denotes p.d (12V)I denotes currentR denotes resistance (3 Ω)[tex]\longrightarrow[/tex] 12 = I × 3
[tex]\longrightarrow[/tex] 12 ÷ 3 = I
[tex]\longrightarrow[/tex] 4 Ampere = I
Your mass is 80 kg on Earth. What would your MASS
be on Planet Roethler, which has twice as much
gravity as on Earth?
40 kg
160 kg
80 kg
Mass doesn't change. It doesn't matter where you are.
If your mass is 80 kg when you're on Earth, then your mass is 80 kg. It doesn't matter where you are, where you used to be, or where you're going tomorrow.
If a wire lies withina magnetic field what must be true for the magnetic field to produce an electric current in the wire
Answer:
The magnetic field through the wire must be changing
Explanation:
According to Faraday's law, the induced emf, ε in a metallic conductor is directly proportional to the rate of change of magnetic flux,Φ through it. This is stated mathematically as ε = dΦ/dt.
Now for the wire, the magnetic flux through it is given by Φ = ABcosθ where A = cross-sectional area of wire, B = magnetic field and θ = angle between A and B.
So, dΦ/dt = dABcosθ/dt
Since A and B are constant,
dΦ/dt = ABdcosθ/dt = -(dθ/dt)ABsinθ
Since dθ/dt implies a change in the angle between A and B, since A is constant, it implies that B must be rotating.
So, for an electric current (or voltage) to be produced in the wire, the magnetic field must be rotating or changing.
a wave in which particles of the medium vibrate at right angles to the direction that the wave travels is called?
Explanation:
Longitudinal waves are waves in which the vibration of the medium is parallel to the direction the wave travels and displacement of the medium is in the same (or opposite) direction of the wave propagation. Mechanical longitudinal waves are also called compressional or compression waves, because they produce compression and rarefaction when traveling through a medium, and pressure waves, because they produce increases and decreases in pressure.
Answer:
In transverse waves, particles of the medium vibrate to and from in a direction perpendicular to the direction of energy transport.
Explanation:
hope it will help u
You can see stars brighter than magnitude +6 with your naked eye under dark sky conditions, and you can also see the full moon at magnitude –13. (You can glance at the Sun, which is at magnitude –27, but you can't safely look at the Sun.) Given these limits, what is the dynamic range of the naked eye?
A bus starts to move with the speed of 15m/s. Calculate the time taken by the bus to cover distance of 15000m.
Answer:
1000
Explanation:
the formula of time taken= d/s. t=15000÷15 t=1000. I hope it helps
formula of distance is S=Vt
so, 15000=15t
15000 divide by 15=t
1000=t or t=1000
Does this equation show that transmutation has taken place during decay?
Why or why not?
Ni – S.Ni+y
A. No, because there is conservation of the number of atoms as well
as the number of nucleons.
B. No, because high-energy electromagnetic waves are emitted.
C. Yes, because the numbers of nucleons and atoms are conserved.
D. Yes, because nickel atoms remain nickel atoms with the same
number of neutrons.
Answer:
Maybe A is the correct answer
Mike is serving the volleyball for the second time in a volleyball game. If the ball leaves his hand with twice the velocity it had on the first serve, its horizontal range R would be:
Answer:
His new horizontal range is 4 times his initial range.
Explanation:
Since Mike serves the ball with velocity, u, his horizontal range is
R = u²sin2Ф/g where Ф is the angle between u and the horizontal.
Now, if on his second serve, the ball leaves his hand with twice the velocity of his initial serve, the new velocity is v = 2u.
So, the new range R' = v²sin2Ф/g
R' = (2u)²sin2Ф/g
R' = 4u²sin2Ф/g
Since R = u²sin2Ф/g,
R' = 4u²sin2Ф/g
R' = 4R
So, his new horizontal range is 4 times his initial range.
What is the name of the Egyptian sun god, usually depicted as a hawk-headed man with a solar disk and cobra on his head
Answer: Re-Horakhty
Explanation:
He has a human body and a falcon head, he has a crown in form of a disk with a cobra on his head. Ra-Horakhty was thought of as the god of the rising sun.
What is potential energy? What are some of its examples.
Answer:
the energy stored in an object because of its specific state or position is called its potential energyexamples:-a compressed springWater that is behind a dam.A car that is parked at the top of a hill. a moving car.Etc....
Explanation:
❣️jess bragoli❣️#keep learning!!
Explanation:
POTENTIAL energy is the energy that is stored in an object due to its position relative to some zero position.
The electric potential energy of an electric dipole is ______ when the dipole is aligned with an electric field. The electric potential energy of an electric dipole is ______ when the dipole is aligned with an electric field. most positive most negative zero infinite undefined
Answer:
Most negative
Explanation:
The electric potential energy of a dipole U = -pEcosθ where p = dipole moment, E = electric field and θ = angle between p and E.
When the electric dipole is aligned with the electric field, the angle between p and E is 0°. That is θ = 0°.
So, U = -pEcosθ
U = -pEcos0°
U = -pE
which is the most negative value it can have.
So, the electric potential energy of an electric dipole is most negative when the dipole is aligned with an electric field.
So, most negative is the answer.
What is the current flowing through the circuit shown? (V= 110 V, R, = 200, R2 = 300, R3 = 10 0) (Ohm's law: V = IR)
A. 1.8 A
B. 20 A
C. 0.05 A
D. 0.55 A
Answer:
A
Explanation:
The first thing you have to do is go back and list the resistances correctly. R1 = 20 R2 = 30 and R3 = 10.
Leave the units off if you can't make an omega.
The resistance of a series circuit (that's what this is) is r1 + r2 + r3 = 10 + 20 + 30 = 60 ohms
Now use ohms law.
R = 60 ohms
V = 110 volts.
I = V / R
I = 110/60
I = 1.833 to the nearest 1/10 = 1.8
Principles What are the advantages of total reflecting prism over plane mirror?
Answer:
There is no significant energy loss in the total internal reflection and the reflected ray has entire light wave energy so that a brighter image is formed, but some energy in the plane mirror is absorbed inside and thus energy loss.
Explanation:
Advantages
If the light is reflected from the total prism, the entire light is completely reflected internally. But only about 90% of the incident light is reflected from the mirror of the plane. Consequently, reflected light intensity is more in the prism than light reflected in the plane mirror. There are no more reflections in the prism as in the plane mirror in its entirety. In the case of a total prism as in the plane mirror, the image is not reversed laterally. It requires no silvering, one of the benefits.what is gamma rays brust
Explanation:
A gamma - Ray Brust (GRB) is often the brightest source in the sky, often brighter than everything else combined.Answer:
A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.
Two uses of static electricity and dangers of static electricity
Answer: The uses of static electricity include:
--> photocopying machines
--> precipitators
The dangers of static electricity include:
--> sparks that can lead to explosion
--> Damage to electronic equipment
Explanation:
STATIC electricity is defined as the imbalance that exists between a positive and a negative charge either within or outside an object. This is because all physical objects are made up of atoms which contains protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral. This shows that physical objects are made up of charges.
Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are BALANCED in an object, which makes that object neutral.
Applications( uses) of static electricity include:
--> photocopying machines: Inkjet photocopiers and printers use static electricity to guide a minute jet of ink to the page’s precise position.
--> precipitators: the static electricity is applied in an electrostatic precipitator whereby they remove smoke from waste gases before they pass out of the chimneys in power stations that burn fossil fuels.
The disadvantages (dangers) of static electricity include:
--> Sparks that can lead to explosion: sparks generated from static electricity can cause fires or explosions due to the ignition of flammable or explosive mixtures.
--> Damage to electronic equipment: this is due to components from electrostatic discharge.
The search for black holes involves searching for The search for black holes involves searching for Group of answer choices single stars that emit large amounts of X-rays. a stellar core greater than 3 solar masses large spherical regions from which no light is detected. pulsars with periods less than one millisecond. pulsars that are orbited by planets.
Answer:
Large spherical regions from which no light is detected
Explanation:
A black hole is an object that has an extremely high density such that it possesses very powerful gravitational force that prevents the escape of all objects including light from it, and consumes nearby objects.
Due to the power of the gravitational force of a black hole, at the center, objects are infinitesimally compressed resulting in the inapplicability of the concept of space and time and the location is known as a singularity
Therefore, the search for black holes involves searching for large spherical regions from which no light is detected.
Why does An apple, potato, and onion all taste the same if you eat them with your nose plugged
The burner in a hot air balloon adds 6400 J of heat to the balloon while the ballon expands. As the balloon expands, it does 3100 J of work on the surrounding air. What is the internal change in thermal energy of the balloon?
Answer:
the change in the internal energy of the balloon is 3,300 J
Explanation:
Given;
heat gained by the balloon system, Q = 6,400 J
work done on the surrounding air by the balloon, W = 3,100 J
The change in the internal energy of the system is calculated from the first law of thermodynamics;
ΔU = Q - W
where;
ΔU is the change in the internal energy of the balloon;
ΔU = 6,400 J - 3,100 J
ΔU = 3,300 J
Therefore, the change in the internal energy of the balloon is 3,300 J
During an Apollo lunar landing mission, the command module continued to orbit the Moon at an altitude of about 112 km . How long did it take to go around the Moon once?
Express your answer using three significant figures and include the appropriate units.
T=2 Hours 6 Minutes 33.53 Seconds
Question 5 of 10
A 15 N force is applied to an object, which then accelerates at 5.0 m/s2. What
is the mass of the object?
A. 10 kg
B. 20 kg
C. 75 kg
D. 3.0 kg
Hi there!
[tex]\large\boxed{D. \text{ } 3.0 kg}}[/tex]
Use the following equation to solve:
F = ma, where:
F = Force (N)
m = mass (kg)
a = acceleration (m/s²)
Thus:
15 = 5m
15/5 = m
mass = 3 kg
As the motor speeds up, the value of current decreases because of A. Friction loss B. Increase in resistance C. Increase in back emf D. All mentioned above
Answer:
C. Increase in back emf
Explanation:
As the current through the field winding decreases the field strength also decreases and the back-emf is reduced, as a result the motor speeds up.
When the motor begins to speed-up, an additional back EMF is generated due to induction which reduces armature current. This also results in reduced strength of the field flux. The back emf generated is not enough to reduce the armature current which could stop the acceleration of the motor and the motor further accelerates.
