calculate the equilibrium constant for the reaction between cd2+(aq) and zn(s) . express your answer to two significant figures.

ATP or Adenosine triphosphate is the energy molecule that is present in every living cell. It is important for energy transfer and storage processes. It is hydrolyzed by enzymes to form ADP and Pi and this reaction releases energy that is used by the cell.

The intracellular ATP/ADP ratio is 10x for the given problem. Therefore, [ATP]/[ADP] = 10 and [ATP] = 10[ADP].The concentration of Pi is given as 10mM.The reaction ATP → ADP + Pi has a ∆G˚= -30 kJ/mol.The activity coefficients for all species are 2.Using the relationship ΔG = ΔG° + RT ln Q where R = 8.314 J/mol K and T = 298 K. We can calculate the ΔG value for the reaction by first calculating the Q value as below.Q = {[ADP] [Pi]}/[ATP] = {[ADP] [Pi]}/{10[ADP]} = [Pi]/10The value of Q is 10mM/10 = 1mMΔG = ΔG° + RT ln Q= -30000 J/mol + (8.314 J/mol K × 298 K) × ln (1mM × 2) = -30000 J/mol + 1248 J/mol = -28752 J/molThe ΔG value for ATP hydrolysis inside the cell is -28752 J/mol.

For more information on Adenosine triphosphate visit:

brainly.com/question/859444

#SPJ11

The final products for the two-step reaction where the nucleophile selectively reacts once in each step reaction.

In a two-step reaction where the nucleophile selectively reacts once in each step, the reaction occurs in two steps.Step 1: In the first step, the nucleophile reacts with the given substrate to form an intermediate. Step 2: In the second step, the intermediate formed in the first step undergoes a reaction with the second reactant to form the final product.

The final products of the two-step reaction where the nucleophile selectively reacts once in each step are as follows: Step 1: The nucleophile attacks the substrate to form an intermediate Step 2: The intermediate formed in the first step reacts with the second reactant to form the final product.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

135 moles = 12195 grams

1.25 moles Ca(PO)₂ = 279.475 grams

0.600 moles CHIO₉ = 289.8 grams

The mass in grams of each compound can be determined using the molar mass and the given number of moles. In the case of compound a, with 135 moles, the molar mass needs to be multiplied by the number of moles to obtain the mass in grams. Similarly, for compound b and c, the molar masses are multiplied by the corresponding number of moles.

By using the molar masses of each compound, we can calculate their respective gram masses.

Learn more about: Grams

brainly.com/question/30426054

#SPJ11

NO cannot be used to fill a balloon that will float in the air at STP. So, the correct option is a.

The ideal gas law, PV = nRT, relates the pressure, volume, and temperature of a gas. In the ideal gas law, R is a constant, and the value of R depends on the units used to measure the other parameters. At standard temperature and pressure (STP), the ideal gas law simplifies to PV = 1 atm and 273.15 K.

Therefore, the density of a gas at STP can be determined as follows:

Density = (molar mass) x (pressure)/(R x temperature)

We can't use NO (nitric oxide) to fill a balloon that will float in the air at STP among the given options. This is because NO has a higher density than air. Since the density of NO is greater than the density of air, it will sink rather than float. Therefore, it cannot be used to fill a balloon that will float in the air at STP.

So, the correct option is a. NO.

Learn more about STP at https://brainly.com/question/2783971

#SPJ11

Yes, a precipitate will form when The formation of a precipitate depends on the solubility product (Ksp) of the salt.Here, NaF and Ca(NO3)2 are the salts.

The balanced equation for the reaction between The Ksp expression for CaF2 is given as: The solubility product of CaF2  As we know that Ksp is the product of the concentration of the ions raised to the power of their stoichiometric coefficient, and the reactants used to make CaF2 are Ca2+ and F-, therefore, we will find out the concentrations of Ca2+ and F- using their initial concentrations.

Let us first calculate the initial moles of NaF and From the balanced equation above, we know that 1 mole of Ca(NO3)2 reacts with 2 moles of NaF to give 1 mole of CaF2. As we have less amount of Ca(NO3)2 as compared to NaF, it will react completely.

To know more about solubility visit :

https://brainly.com/question/31493083

#SPJ11

Ethyl alcohol is widely used as a sanitizing agent due to its ability to kill bacteria and viruses effectively.

Ethyl alcohol, also known as ethanol, is a commonly used compound in sanitizing agents due to its potent antimicrobial properties. It has the ability to effectively kill a wide range of bacteria and viruses, making it a valuable ingredient in various disinfectants, hand sanitizers, and surface cleaners.

One of the reasons why ethyl alcohol is widely used as a sanitizing agent is its ability to denature proteins. When applied to a surface or skin, ethyl alcohol disrupts the cell membranes of microorganisms, causing them to break apart and ultimately leading to their inactivation. This denaturing effect makes it an effective tool for sanitizing and disinfecting surfaces, tools, and even hands.

Moreover, ethyl alcohol evaporates quickly, which contributes to its effectiveness as a sanitizing agent. When applied to a surface, the alcohol evaporates rapidly, ensuring that the contact time between the alcohol and the microorganisms is sufficient to kill them. This quick evaporation also minimizes the residual moisture left on surfaces, reducing the risk of microbial growth.

However, it is important to note that pure ethyl alcohol is highly flammable, with a relatively low flash point and autoignition temperature. These properties make it crucial to handle and store ethyl alcohol-based sanitizers with care, keeping them away from open flames or heat sources that could potentially ignite the alcohol vapors.

In conclusion, ethyl alcohol is widely used in sanitizing agents due to its powerful antimicrobial properties, ability to denature proteins, and quick evaporation. However, it is crucial to be aware of its flammability and handle it with caution to ensure safety during its use.

Learn more about Ethyl alcohol

brainly.com/question/28000547

#SPJ11

The correct ranking of decreasing metallic character is Rb > Al > Si > Zn > N > P.

To determine the order of decreasing metallic character among the given elements, we need to consider their position in the periodic table.

Metals generally exhibit characteristics such as high electrical conductivity, luster, malleability, and ductility. Nonmetals, on the other hand, tend to have opposite properties.

Among the given elements, Rb (rubidium) is the most metallic since it is an alkali metal located in Group 1 of the periodic table. Al (aluminum) is also a metal, but it is less metallic than Rb.

Si (silicon), Zn (zinc), and N (nitrogen) are nonmetals, with Si being the least nonmetallic among them.

P (phosphorus) is also a nonmetal, and it is generally less metallic than N.

Based on this analysis, the correct ranking of decreasing metallic character is Rb > Al > Si > Zn > N > P.

To know more about periodic table, refer here:

https://brainly.com/question/11155928#

#SPJ11

The mass of chlorine that chemist must use to react completely with the sodium was calculated to be 54.0 g.

The balanced chemical reaction of Na and Cl is written as:

2Na + Cl₂ --> 2NaCl

The molar ratio for the Na and Cl₂ is 2:1.

The mass of sodium that chemist has is = 35 grams

The moles of sodium in 35 grams of sodium can be calculated as:

35 grams/ 23 gram/ mole = 1.52 moles

According to the molar ratio of Na and Cl₂ it can be inferred that the moles of chlorine required in the reaction is half the moles of sodium required.

If 2 moles of sodium are required for one mole of Chlorine then 1.5 moles of sodium will react with

1/2 x 1.52 mol = 0.760 mol of Cl₂

mass of chlorine = 71.0 g/mol

mass of chlorine in 0.76 moles = 0.760 mol x 71.0 g/mol = 54.0 g

So the mass of chlorine required is =  54.0 g.

To learn more about chlorine, refer to the link:

https://brainly.com/question/19460448

#SPJ4

The moles of water produced from 3.07 mol of H2O2 are 64.47 moles. Answer: 64.47

Part A Given the following decomposition reaction, calculate the moles of water produced from 3.07 mol of

H2O2.2 H2O2(1) → 42 H2O(l) + O2(g)

Molar ratio between H2O2 and

H2O is 2:42 or 1:21.

Therefore, moles of water produced from 3.07 mol of H2O2 is:

Moles of water produced = Moles of H2O2 × 21/1 = 3.07 × 21 = 64.47 (approx)

Therefore, the moles of water produced from 3.07 mol of H2O2 are 64.47 moles.

Answer: 64.47

To know more about moles visit:

https://brainly.com/question/15209553

#SPJ11

Expressing the answer with the appropriate units, we have:

3.07 moles of water.

Moles of water: Moles of a substance are a measure of the amount of that substance present. It is a unit used in chemistry to quantify the number of particles (atoms, molecules, or ions) in a sample.

The balanced equation for the decomposition reaction of hydrogen peroxide [tex]\rm(H_2O_2)[/tex] is: [tex]\rm\[2H_2O_2(\ell) \rightarrow 2H_2O(\ell) + O_2(g)\][/tex]

According to the stoichiometry of the reaction, for every 2 moles of [tex]H_2O_2}[/tex] consumed, 2 moles of [tex]H_2O[/tex] are produced.

To calculate the moles of water [tex](H_2O)[/tex] produced from 3.07 moles of [tex]H_2O_2[/tex], we can set up a ratio: (3.07 moles [tex]\rm H_2O_2[/tex]) x (2 moles [tex]\rm H_2O_[/tex] / 2 moles [tex]\rm H_2O_2[/tex]) = 3.07 moles [tex]\rm H_2O[/tex]

Therefore, from 3.07 moles of [tex]\rm H_2O_2[/tex], 3.07 moles of [tex]\rm H_2O[/tex] are produced.

Thus, Expressing the answer with the appropriate units, we have:

3.07 moles of water.

Know more about Moles:

https://brainly.com/question/15209553

#SPJ4

An n-input nmos nor gate has ks = 4mA/V2, kl = 2 mA/V2, vt = 1.0V, VDD = 5.0V. Find the approximate values for VOH and VOL for n = 1, 2 and 3 inputs. QL = sat and QS = ohmic, VI = VOH. For a NOR gate, when all inputs are high, the output is low.

When any input is low, the output is high. Here, it is given that QL is in saturation and QS is in the ohmic region. The relation between VDS and VGS for saturation and ohmic region is given as;$$V_{{DS}} \geq V_{{GS}} - V_{{th}}$$ $$V_{{DS}} \lt V_{{GS}} - V_{{th}}$$where, Vth is the threshold voltage. Also, in saturation region,$$I_{{D}} = \frac{1}{2} K_{{n}} \frac{W}{L} (V_{{GS}} - V_{{th}})^2 $$where, ID is the drain current, Kn is the process parameter (µnCox), W is the width, L is the length of the MOSFET. The value of VOH can be calculated for n = 1 input as follows:To obtain VOH, we need to make all inputs high. Therefore,$$I_{{D}} = \frac{1}{2} K_{{n}} \frac{W}{L} (V_{{DD}} - V_{{th}})^2 $$Substituting the given values, we get,$$I_{{D}} = \frac{1}{2} \cdot 4 \cdot 10^{-3} \cdot \frac{1}{2} (5 - 1)^2 = 16 \mu A $$.

When QL is in saturation region,$$V_{{D}} = V_{{DD}} - I_{{D}}R_{{D}} = 5 - 16 \cdot 10^{-6} \cdot 1.5 \cdot 10^{3} = 2.76V $$Since all the inputs are high and the output is low, VOH = 0.The value of VOL can be calculated as follows:Let us consider n = 2 inputs. In this case, for the MOSFETs in the saturation region,$$I_{{D}} = \frac{1}{2} K_{{n}} \frac{W}{L} (V_{{GS}} - V_{{th}})^2 $$Therefore,$$I_{{D}} = \frac{1}{2} \cdot 4 \cdot 10^{-3} \cdot \frac{1}{2} (5 - 1)^2 = 16 \mu A $$and $$V_{{GS}} = V_{{I}} = V_{{OH}} $$Assuming the MOSFET in the ohmic region is in cutoff state,$$V_{{D}} = V_{{I}} = V_{{OH}} $$Therefore, the output voltage is the voltage drop across the resistor and the MOSFET in the saturation region.$$V_{{OL}} = V_{{D}} + I_{{D}}R_{{D}} = 5 - 16 \cdot 10^{-6} \cdot 1.5 \cdot 10^{3} = 2.76V $$The value of VOH and VOL can be calculated for n = 3 inputs in a similar way.

To know more about nmos  visit :

https://brainly.com/question/30961821

#SPJ11

A precipitation reaction takes place between two aqueous solutions that yield an insoluble compound that is also known as a precipitate.

One of the techniques to predict whether a precipitation reaction will occur upon mixing two aqueous solutions is the solubility rules.

Solubility rules are a simple set of guidelines that help determine whether an ionic compound will be soluble in water or insoluble. These rules are a way of predicting what will happen in a reaction and are very useful for chemists.In simple terms, the solubility rules states that:If an ionic compound contains the following ions, it is soluble: Li+, Na+, K+, NH4+, NO3-, ClO3-, ClO4-, CH3COO-, and C2H3O2-.

If an ionic compound contains any of the following anions, it is insoluble: CO32-, PO43-, SO32-, SO42-, S2-, OH-, and O2-.It is worth noting that there are exceptions to these rules. For example, CaSO4 is an insoluble compound according to the solubility rules, but it is soluble in water because it reacts with water to form ions.

learn more about precipitation reaction here

https://brainly.com/question/13016165

#SPJ11

The hybridization of the central atom in SF5Cl is sp3d2.

In the given molecule, the central atom is sulfur (S), which is surrounded by five fluorine atoms and one chlorine atom. In order to determine the hybridization of the central atom, we need to use the concept of hybrid orbitals.According to VSEPR theory, the SF5Cl molecule has an octahedral electron geometry. In this geometry, the central atom has six electron groups around it, including five bonding pairs and one lone pair of electrons. Therefore, the hybridization of the central atom should involve the combination of six atomic orbitals:

one 3s orbital, three 3p orbitals, and two 3d orbitals.

The combination of these orbitals results in six hybrid orbitals, known as sp3d2 orbitals. These hybrid orbitals are arranged in an octahedral geometry around the central sulfur atom, with five orbitals pointing towards the five fluorine atoms and one orbital pointing towards the chlorine atom.In summary, the hybridization of the central atom in SF5Cl is sp3d2, which involves the combination of six atomic orbitals. This hybridization allows the central sulfur atom to form six hybrid orbitals, which are arranged in an octahedral geometry.

To know more about hybridization visit:

https://brainly.com/question/29020053

#SPJ11

The substance E1 is made of Pd metal and the substance E2 is made of Ni metal.The chemical species in solution S1 is PdSO4(aq).Thus, the balanced half-reactions at the cathode and anode of the galvanic cell are

Ni2+(aq) + 2e− → Ni(s) (cathode) and Pd(s) → Pd2+(aq) + 2e− (anode).

Given below is the balanced chemical equation for the reaction that occurs in the galvanic cell:

Ni(s) + PdSO4(aq) → NiSO4(aq) + Pd(s)

The cathode half-cell has the following reaction:

Ni2+(aq) + 2e− → Ni(s)

The anode half-cell has the following reaction:

Pd(s) → Pd2+(aq) + 2e−

Hence, the cathode half-cell and anode half-cell reactions are written as follows:Cathode Half-Cell:

Ni2+(aq) + 2e− → Ni(s)Anode Half-Cell: Pd(s) → Pd2+(aq) + 2e−

The substance E1 is made of Pd metal and the substance E2 is made of Ni metal.The chemical species in solution S1 is PdSO4(aq)

.Thus, the balanced half-reactions at the cathode and anode of the galvanic cell are

Ni2+(aq) + 2e− → Ni(s) (cathode) and Pd(s) → Pd2+(aq) + 2e− (anode).

To know more about cathode visit:

https://brainly.com/question/32063482

#SPJ11

The suitable syntheses to prepare the given target molecule reaction (as the major product formed) are;B con 80 theat OH trẻ 90CH Talpine 2.

Target molecule is not provided. Decomposition reaction is a type of chemical reaction in which a more complex substance is broken down into two or more simpler substances.

A synthesis reaction is a chemical reaction in which two or more simple substances combine to form a more complex product. This reaction may be classified into two categories, which are: direct combination reactions and decomposition reactions. Direct combination reaction is a type of chemical reaction in which two or more reactants combine to form a more complex product.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

At [tex]25^0C[/tex], the maximum work that can be obtained from 5.13 g of zinc metal in a given reaction is determined by calculating the change in Gibbs free energy (∆G).

To calculate the maximum work, we need to determine the change in Gibbs's free energy (∆G) for the reaction. The Gibbs free energy change is given by the equation ∆G = ∆H - T∆S, where ∆H is the change in enthalpy and ∆S is the change in entropy.

Given that the enthalpy change (∆H) for the reaction is 65.52 kJ/mol and the entropy change (∆S) is -147.0 J/mol·K, we can use these values to calculate ∆G.

First, we need to convert the mass of zinc metal (5.13 g) to moles. The molar mass of zinc (Zn) is approximately 65.38 g/mol. Therefore, the number of moles of zinc is 5.13 g / 65.38 g/mol = 0.0785 mol.

Next, we can calculate ∆G using the equation ∆G = ∆H - T∆S. Given that the temperature (T) is [tex]25^0C[/tex], which is 298.15 K, we can substitute the values into the equation to find ∆G.

∆G = 65.52 kJ/mol - 298.15 K * (-147.0 J/mol·K)

∆G = 65.52 kJ/mol + 43.83 kJ/mol

∆G = 109.35 kJ/mol

Therefore, the maximum work that could be obtained from 5.13 g of zinc metal in the given reaction at [tex]25^0C[/tex] is 109.35 kJ/mol.

Learn more about Gibbs free energy here:

https://brainly.com/question/13795204

#SPJ11

that the Wittig reaction will be run using methanol as a solvent. that the Wittig reaction is a type of organic reaction that involves the conversion of a ketone or aldehyde to an alkene using a triphenylphosphine ylide and an appropriate

carbonyl compound. The reaction is named after Georg Wittig, who first described this reaction in 1954. The Wittig reaction is a powerful tool for the synthesis of alkenes. The reaction can be carried out in a variety of solvents, including hexanes, methanol, or no solvent in this experiment, the reaction will be run using methanol as a solvent. After the reaction is complete, the solvent is removed to yield a residue. Hexane is added to the residue to leach out the product.

The crude product is then recrystallized from a solvent mixture of hexanes and methanol  of the procedure is that the Wittig reaction will be run using methanol as a solvent. After the reaction is complete, the solvent is removed to yield a residue. Hexane is added to the residue to leach out the product. The crude product is then recrystallized from a solvent mixture of hexanes and methanol.

To know more about reaction  Visit;

https://brainly.com/question/30630448

#SPJ11

The compound that will not have a different solubility with a change in pH is:

AgF

The dissociation constant (Ksp) of the following chemical compounds are;

AgF = 1.6 x 10-10

Ca3(PO4)2 = 1.3 x 10-29

SrCO3 = 3.2 x 10-9

CuBr = 5.0 x 10-9

CuS = 6.0 x 10-37

Learn more about the solubility:

brainly.com/question/23946616

#SPJ11

No reaction occurs in the above chemical equation, it is written as NR.

Here are the balanced formula unit and net ionic equations for each of the given chemical reactions:A.

Copper (II) chloride + Lead (II) nitrate

CuCl2(aq) + Pb(NO3)2(aq) → PbCl2(s) + Cu(NO3)2(aq)

Formula unit equation:

CuCl2(aq) + Pb(NO3)2(aq) → PbCl2(s) + Cu(NO3)2(aq)

Net Ionic Equation: Cu2+(aq) + Pb2+(aq) → PbCl2(s) + Cu2+(aq)B. Zinc bromide + Silver nitrate

ZnBr2(aq) + 2AgNO3(aq) → 2AgBr(s) + Zn(NO3)2(aq)

Formula unit equation:

ZnBr2(aq) + 2AgNO3(aq) → 2AgBr(s) + Zn(NO3)2(aq)

Net Ionic Equation: Zn2+(aq) + 2Br-(aq) + 2Ag+(aq) + 2NO3-(aq) → 2AgBr(s) + Zn2+(aq) + 2NO3-(aq)C. Iron (III) nitrate + Ammonia solution

Fe(NO3)3(aq) + 3NH3(aq) → Fe(OH)3(s) + 3NH4NO3(aq)

Formula unit equation: Fe(NO3)3(aq) + 3NH3(aq) → Fe(OH)3(s) + 3NH4NO3(aq)

Net Ionic Equation:

Fe3+(aq) + 3NH3(aq) + 3H2O(l) → Fe(OH)3(s) + 3NH4+(aq)D.

Barium chloride + Sulfuric acid

BaCl2(aq) + H2SO4(aq) → 2HCl(aq) + BaSO4(s)

Formula unit equation:

BaCl2(aq) + H2SO4(aq) → 2HCl(aq) + BaSO4(s)

Net Ionic Equation:

Ba2+(aq) + SO42-(aq) → BaSO4(s)

As no reaction occurs in the above chemical equation, it is written as NR.

To know more about chemical equation visit:

https://brainly.com/question/28792948

#SPJ11

The rate equation for the overall reaction is k[O3][O]. This rate equation shows that the rate of the overall reaction is directly proportional to the concentration of ozone and oxygen atoms.

Rate determining The rate determining step is the slowest step in a multi-step chemical reaction. In the given two-step mechanism, the second step is slow. Therefore, the second step is the rate determining step. b. Rate equation for rate-determining Rate of the reaction = k[O3][O].

The rate equation for the rate-determining step is k[O3][O].c. Rate equation for the overall reaction: For the overall reaction, we add up the rate equations for both steps. However, since step 1 is fast and reversible, the rate of the forward and reverse reactions is equal. Therefore, we can cancel out the [O2] from step 1.2O3(g) → 3O2(g)Step 1: O3(g) O2(g) + O(g).

To know more about equation visit:

https://brainly.com/question/28774287

#SPJ11

The coefficient of the permanganate ion MnO₄⁻) in the balanced equation is 1.

In the balanced equation, MnO₄⁻ + Br⁻ → Mn²⁺ + Br₂ (acidic solution), the permanganate ion (MnO₄⁻) appears only once on the left side of the equation. To balance the equation, we need to ensure that the number of each type of atom is the same on both sides. Since there is only one permanganate ion on the left side, the coefficient for MnO₄⁻ is 1.

Permanganate ions (MnO₄⁻) are often used as strong oxidizing agents in chemical reactions. They have a characteristic deep purple color and play a crucial role in redox reactions. By adjusting the coefficients of the reactants and products in a balanced equation, we can determine the stoichiometry of the reaction and understand the quantities of substances involved.

Learn more about Permanganate

brainly.com/question/15209639

#SPJ11

The given mass of the laboratory worker is 50 kg and the radiation that they were exposed to is 20 mj of neutron radiation with an rbe of 10. We have to find the dose in mSv.

The dose equivalent can be calculated using the formula, Given, Mass of the worker, m = 50 kg Energy absorbed, E = 20 MJRBE (Relative Biological Effectiveness) = 10 We have,1 Sv = 1 Gy x Q, where Q is a quality factor. As per the question, the RBE value is 10 (for neutron radiation).

Now,1 Sv = 1 Gy x Q = 1 x 10 = 10 Gy From the formula, Dose equivalent = Energy absorbed / mass of the worker x RBEWe know, 1 Gy = 1 J/kg∴ Energy absorbed = 20 x 10^6 J Mass of the worker = 50 kgRBE = 10Dose equivalent = Energy absorbed / mass of the worker x RBE= (20 x 10^6) / (50 x 10^3) x 10= 40 mSvTherefore, the dose in mSv is 40.

To know more about radiation visit :

https://brainly.com/question/31106159

#SPJ11

As a result of consuming excess selenium, Carlos is likely experiencing A. All of the choices are correct. Excessive selenium intake can lead to symptoms such as brittle fingernails, garlicky body odor, and fatigue, indicating selenium toxicity.

Consuming excess selenium can lead to various symptoms and health issues. Selenium is an essential mineral required in small amounts for normal body function, but excessive intake can cause toxicity. Some of the common symptoms associated with selenium toxicity include brittle fingernails, garlicky body odor, and fatigue.

Brittle fingernails can occur as a result of selenium toxicity, causing the nails to become weak, easily breakable, and prone to splitting. Garlicky body odor is another possible symptom, where an excess of selenium in the body can lead to a distinctive odor resembling garlic in the breath and sweat. Fatigue is also a common symptom, as selenium toxicity can affect energy metabolism and lead to a feeling of tiredness and low energy levels.

Therefore, all of the choices mentioned in options B, C, and D are correct indicators that Carlos may be experiencing as a result of consuming excess selenium.

To know more about the selenium toxicity refer here :

https://brainly.com/question/27276217#

#SPJ11

Complete question :

3. As a result of consuming excess selenium, Carlos is likely experiencing _________.

A. All of the choices are correct.

B. brittle fingernails

C. garlicky body odor

D. fatigue

1a) The Lewis structure for C2H2O is as follows.  

The molecular formula for acetic acid is C2H4O2. The C atom is the central atom, and it is connected to an O atom by a double bond. Two H atoms are connected to the C atom.

(b) The best Lewis structure for the anion molecular formula shown is:  

In the structure, the formal charge of the C atom is 0, and the formal charge of the N atom is -1. There are also seven electrons in the structure.

2)The complete Lewis structure of the given compound is as shown below:  

One can count the number of valence electrons in the molecule by adding the number of valence electrons in each atom. Two electrons from each bond are removed since the electrons are shared between the two atoms forming the bond. Subtracting these electrons gives the number of valence electrons for the molecule. The Lewis structure is drawn by representing the valence electrons of the atoms by dots and lines. All atoms are connected by single bonds, and all atoms have an octet except the nitrogen atom.

3)The condensed formula for the given bond-line (skeletal) drawing is NH2OH.  

This compound is called hydroxylamine. There is a nitrogen atom at the center, which is attached to two H atoms and an OH group. The condensed formula for the compound is NH2OH.

learn more about formula here

https://brainly.com/question/29797709

#SPJ11

The molecular formula of calcium bromide is CaBr2.

Formula units are the empirical formula or simplest formula of an ionic or covalent network solid compound. They are used to specify the proportions of the atoms or ions present in the compound. It is simply the smallest whole number ratio of atoms or ions in the compound.

First, we will have to find the molar mass of bromide ion.

The molar mass of bromide ion (Br-) is:79.904 g/mol

Molar mass of CaBr2 = (40.078 + 2 × 79.904) g/mol

= 40.078 + 159.808= 199.886 g/mol

Now, calculate the number of moles of Br- in the given sample:

6.50 g Br- × 1 mol Br-/79.904 g

Br-= 0.0813 mol Br-1 mole of CaBr2 contains 2 moles of Br-.

Therefore, the number of moles of CaBr2= 1/2 × 0.0813 mol Br-= 0.04065 mol CaBr2Now, calculate the number of formula units of CaBr2:

Number of formula units of CaBr2 = (0.04065 mol CaBr2) × (6.022 × 10²³ formula units/mol)= 2.449 × 10²¹ formula units

So, 2.449 x 10²¹ formula units of calcium bromide are present in a sample which contains 6.50 g of bromide ion.

learn more about formula here

https://brainly.com/question/29797709

#SPJ11

the number of moles of air in a 4.0 L bottle at 19 °C and 747 mmHg is approximately 0.16 moles.

The ideal gas law equation is expressed mathematically as PV=nRT.

The ideal gas law equation relates the volume, pressure, number of moles, and temperature of an ideal gas. Given the volume of the air (4.0 L), the pressure (747 mmHg), and the temperature (19 °C), the number of moles of air in the 4.0 L bottle can be calculated as follows:

1. Convert the temperature from Celsius to Kelvin:

T(K) = T(°C) + 273.15 = 19 °C + 273.15 = 292.15 K2.

Convert the pressure from mmHg to atm:

747 mmHg × (1 atm / 760 mmHg) = 0.9816 atm3.

Calculate the number of moles of air using the ideal gas law equation:

n = PV/RT = (0.9816 atm × 4.0 L) / (0.08206 L·atm/K·mol × 292.15 K) ≈ 0.16 moles

Therefore, the number of moles of air in a 4.0 L bottle at 19 °C and 747 mmHg is approximately 0.16 moles.

Answer: The correct option is A) 0.5 moles.

learn more about moles here

https://brainly.com/question/15356425

#SPJ11

The number of grams of [tex]CaCO_3[/tex] that will dissolve in 2.00 * 102 ml of 0.0480 M [tex]Ca(NO_3)_2[/tex] can be calculated using the solubility product constant (Ksp) for [tex]CaCO_3[/tex]. Approximately 0.181 g of [tex]CaCO_3[/tex] will dissolve.

To determine the grams of [tex]CaCO_3[/tex] that will dissolve, we need to calculate the concentration of [tex]Ca^2^+[/tex] ions in the solution. Since [tex]Ca(NO_3)_2[/tex] dissociates into [tex]Ca^2^+[/tex], and [tex]2 NO3^-[/tex]ions, the concentration of [tex]Ca^2^+[/tex] ions is twice the molarity of [tex]Ca(NO_3)_2[/tex], which is 0.0480 M × 2 = 0.0960 M.

Using the Ksp expression for [tex]CaCO_3[/tex], which is [tex][Ca^2^+][CO3^2^-][/tex]= [tex]8.70 * 10^(^-^9^)[/tex], and assuming that the dissolution of [tex]CaCO_3[/tex] is complete, we can substitute the concentration of [tex]Ca^2^+[/tex] as 0.0960 M. Let's represent the grams of [tex]CaCO_3[/tex] as "x".

The expression for the solubility product constant then becomes (0.0960)(x) = [tex]8.70 * 10^(^-^9^)[/tex]. Solving for "x", we find that [tex]x = 9.06 * 10^(^-^8^)[/tex]mol/L.

To convert this to grams, we can use the molar mass of [tex]CaCO_3[/tex], which is approximately 100.09 g/mol. Multiplying the molar mass by the number of moles [tex](9.06 *10^(^-^8^) mol/L)[/tex]and the volume [tex](2.00 * 10^2 mL = 0.2 L)[/tex], we get 0.181 g of [tex]CaCO_3[/tex].

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ11

The pH of the solution made by mixing equal volumes of 0.1N H2SO4, 0.1N HNO3, and 0.1N HCl is 0.82.

When an acid is mixed with another acid, the resulting pH is usually lower than either of the two original solutions' pH. This is because acids release hydrogen ions (H+) into the solution, lowering the pH. Therefore, the pH of the solution created by mixing equal volumes of 0.1N H2SO4, 0.1N HNO3, and 0.1N HCl would be less than the pH of any of the individual acid solutions.

To calculate the pH of this solution, you need to determine the concentrations of H+ ions in each of the individual acid solutions and add them together. The pH of a solution is determined by the concentration of H+ ions it contains. The higher the concentration of H+ ions, the lower the pH of the solution.

To calculate the concentration of H+ ions in each of the individual acid solutions, you can use the following formula:

pH = -log[H+]

where [H+] is the concentration of H+ ions in moles per liter (M).

For example, the pH of a 0.1 N solution of HCl can be calculated as follows:

pH = -log[H+]= -log[0.1]= 1

Therefore, the concentration of H+ ions in a 0.1 N solution of HCl is 10^-1 M, and the pH is 1.

To calculate the concentration of H+ ions in the mixed acid solution, you need to add together the concentrations of H+ ions from each of the individual acid solutions. Since the volumes of each of the individual acid solutions are equal, the final volume of the mixed solution will be twice the volume of each of the individual acid solutions. Therefore, the concentration of H+ ions in the mixed solution can be calculated as follows:[H+] = (0.1/2) x (10^-1 + 10^-1 + 10^-1)= 0.15 MThe pH of the mixed solution can then be calculated as follows:

pH = -log[H+]= -log[0.15]= 0.82

To know more about pH visit:

https://brainly.com/question/2288405

#SPJ11

the pH of the given buffer solution is 3.08.

The given buffer solution is made up of 60 mL of 0.25 M HCOOH and 10.0 mL of 0.500 M NaXOOH and we are to determine its pH.

The first step in solving this problem is to determine the moles of each species in the buffer. This can be accomplished by using the following equation:

n(HCOOH) = 0.25 moles/L x 0.060 L = 0.015 moles of HCOOHn

(NaXOOH) = 0.500 moles/L x 0.010 L = 0.005 moles of NaXOOH

Next, we need to calculate the concentration of the buffer:

Concentration of buffer = moles of HCOOH / total volume of buffer= 0.015 moles / (0.060 + 0.010) L = 0.1875 M

Now that we have the concentration of the buffer, we can use the Henderson-Hasselbalch equation to determine the pH:

pH = pKa + log ([A-] / [HA])

where pKa = 3.75 for HCOOHpH = 3.75 + log [(0.005 moles / 0.070 L) / (0.015 moles / 0.070 L)]= 3.75 + log [0.07143 / 0.21428]= 3.75 + (-0.6706)= 3.08

Therefore, the pH of the given buffer solution is 3.08.

learn more about pH here

https://brainly.com/question/172153

#SPJ11

5.95kg To freeze water, the energy required for the solid to liquid (ice) transition is the heat of fusion (Hfus) and the energy required for the liquid to gas (vapor) transition is the heat of vaporization (Hvap).

The energy transferred is given by q = m H, where q is the heat transferred, m is the mass, and H is the heat of transformation required.To freeze the water, 572g of water requires (6.02 kJ/mol) × (18.02 g/mol) = 108.5 kJ of energy to melt and (6.02 kJ/mol) × (18.02 g/mol) = 108.5 kJ of energy to freeze, so a total of 217 kJ of energy is required.To find the quantity of CCI2F2 that needs to evaporate to remove this amount of energy from the water, you will need to find out how much energy is contained in a certain quantity of CCI2F2.

To calculate the number of moles of CCI2F2, you will need to use the density of CCI2F2 at the boiling point, which is -29.8 °C, 1.27 g/cm3, and the molar mass of CCI2F2, which is 120.91 g/mol.The mass of CCI2F2 required to freeze the water is given by the following formula:q = m Hqvaporized m = q / Hvaporizationwhere:Hvaporization is the heat of vaporization of CCI2F2, which is 17.4 kJ/mol.Using this equation with the quantities given above results in the following:q = (217 kJ) / (17.4 kJ/mol)q = 12.47 mol CCI2F2This calculation determines the number of moles of CCI2F2 that are required to remove 217 kJ of energy from the water.

To know more about vaporization visit:

https://brainly.com/question/32499566

#SPJ11

The solution is prepared using 0.125 g of glucose, C₆H₁₂O₆, in enough water to make 250 g of total solution. So, the correct option is (b) 5.00 × 10² ppm.

The concentration of this solution, expressed in parts per million (ppm), is given by the equation: ppm = (mass of solute/mass of solution) × 10^6. We are given mass of solute, glucose, and mass of solution. We are supposed to find out the concentration of the solution in ppm. We can substitute the given values and get the answer: mass of solute = 0.125 g mass of solution = 250 g ppm = (mass of solute/mass of solution) × 10⁶ = (0.125/250) × 10⁶ = 500 (Answer in part per million). Therefore, the concentration of the solution, expressed in parts per million, is 5.00 × 10² ppm.

To know more about solution visit:-

https://brainly.com/question/29296260

#SPJ11