Calculate the intensity of current flowing through a computer that consumes 180W and operates at 120 V.

A.)0,66 A
B.)12600 A
C.)1,5 A
D.)60 A

Answer:

Kelvin

Explanation:

The SI unit to use in measuring the temperature of hot liquid is kelvin (K)

Answer:

The color blue emerges at 19.16° and the color red emerges at 19.32°.

Explanation:

The angle at which the two colors emerge can be calculated using the Snell's Law:

[tex]n_{1}sin(\theta_{1}) = n_{2}sin(\theta_{2})[/tex]

Where:

n₁ is the refractive index of the incident medium (air) = 1.0003

n₂ is the refractive index of the refractive medium:

    blue light in crown glass = 1.524

    red light in crown glass = 1.512

θ₁ is the angle of the incident light = 30°

θ₂ is the angle of the refracted light                            

For the red wavelengths we have:

[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.0003*sin(30)}{1.512}) = 19.32 ^{\circ} [/tex]

For the blue wavelengths we have:

[tex] \theta_{2} = arcsin(\frac{n_{1}sin(\theta_{1})}{n_{2}}) = arcsin(\frac{1.0003*sin(30)}{1.524}) = 19.16 ^{\circ} [/tex]

Therefore, the color blue emerges at 19.16° and the color red emerges at 19.32°.  

I hope it helps you!

Answer:

Chemical Energy

Explanation:

Find answers and explanations in the attachments

Answer:

Explanation:

) (C) Suppose the piston is fixed. Find the energy input required to raise the temperature to 700 K.

Answer:

“They may feel colder but that's only an illusion,” Dr. Begley says. “Copper mugs actually absorb heat from the room faster than a glass.” Copper is an excellent thermal conductor, meaning it transfers heat from hot sources (like the room or your hand) to cold sources (like your drink) very efficiently.

Explanation:

Answer:

a. [tex]2.54 \times 10^{21} NC^{-1}[/tex]

b. Outwards

Explanation:

The computation is shown below:

a. The magnitude could be computed by applying the following formula

Electric field, E is

[tex]= \frac{kq}{r^{2}} \\\\ = \frac{9\times10^{9} \times86\times1.6\times10^{-19}}{(6.98\times10^{-15})^2}[/tex]

[tex]= 2.54 \times 10^{21} NC^{-1}[/tex]

b. As we can see that there is a positive charge so the direction would be in the outward direction in the electric field i.e. produced by the protons

Basically we applied the above formula for the first part

Answer:

Answer c: "when particles in matter gain or lose energy , they change state"

Explanation:

As energy is provided to the molecules of the substance in question, they acquire more speed or vibration, increasing their separation in the substance, which can become then a liquid , or a gas. The reverse path also happens as the particles give away energy.

Answer:

c. when particles in matter gain or lose energy , they change state

we know that for example, if you add heat (energy) to ice it would melt (change state) or if you freeze water (change state) it would become ice.

Answer:

Given that;

Number of turns in the solenoid N = 310

Length of the solenoid L = 18 cm = 0.18 m

Radius of the solenoid r = 1.60 cm = 0.016 m

Current in the first Circuit I₁ = 1.90A

Number of turns in second coil N₂ = 4

Final Current solenoid I₂ = 5.0 A

Time interval to change the time Δt = 0.9 s

a)

According to Ampere's law, magnetic field inside a conductor is calculated as;

B₁ = ц₀N₁I₁ / L

(ц₀ = 4π × 10⁻⁷  constant)

therefore we substitute

{(4π × 10⁻⁷) ×  310 × 1.9A} / 0.18m

= 0.0041 T

b)

Magnetic field inside the solenoid after t = 0.9

B₁ = ц₀N₁I₂ / L

= {(4π × 10⁻⁷) ×  310 × 5.0A} / 0.18m

= 0.0108 T

c)

Area of coil is

A = πr²

A = π ×  ( 0.016 )²

A = 0.000804 m²

d)

Change in magnetic influx is

dФ = (B₂ - B₁) A

= ( 0.0108 T - 0.0041 T) × 0.000804 m²

= 0.0000053868 ≈ 5.39 × 10⁻⁶

e)

Average induced emf is

e = -N₂ ( dФ / dt )

e = ( -4 ) ( 5.39 × 10⁻⁶ / 0.9)

e = - 2.39 × 10⁻⁵V ( NOTE, this is not equal to the instantaneous induced emf )

f)

The induced emf is very low, so the contributions to the magnetic field in the coil is Negative.

Answer:

lathe

perfectly symmetrical

Answer: A lathe is used to turn wood . It rotates and carves wood to produce a perfectly symmetrical form .

First one is lathe .

Second one is perfectly symmetrical .

Explanation: I just took the test on Plato and had 100%

Answer:

mechanical energy or chemical energy

Answer:

40085 Hz

Explanation:

We are given; Sound frequency emmision of bat;f = 38.9 kHz = 38900 Hz

Bat is moving at 0.015 times the speed of sound in air.

Speed of sound in air = 343 m/s

The formula for waves reflected off the wall is calculated from Doppler equation as:

f' = f(v + v_d)/(v - v_s)

Where;

f is the frequency = 38900 Hz

f' is the detected frequency,

v_d is the velocity of the detector = 0.015 × 343 = 5.145

v_s is the velocity of the source = 0.015 × 343 = 5.145 m/s

v is the velocity of the sound = 343 m/s

Thus;

f' = 38900(343 + 5.145)/(343 - 5.145)

f' ≈ 40085 Hz

Answer:

The correct option is;

3. The total mechanical energy is constant as the block moves back and forth

Explanation:

The total mechanical energy is the sum of the potential and kinetic energies of the system

For a system that is isolated from the effects of external forces, but being acted upon by the internal conservative forces within the system, the total mechanical energy is constant

For a black and spring system, we have total mechanical energy, E = 1/2×K×A².

Where;

K = Constant

A = The amplitude of motion

Therefore, where there is no loss to friction, with A, remaining constant, the total mechanical energy will be constant.

Answer:

1) Tailored software  Library management system

2) Utility software Scan viruses

3) Operating system Used to coordinate the hardware of the computer

4) Packaged software set of programs Microsoft office

Explanation:

1) A tailored software, also known as a custom software, is one that is designed and tailor-made only for a particular organisation

2) A utility software is a computer maintenance and analysis software used to enable proper functioning of the computer by performing restorative and maintenance tasks

3) Operating system software

The operating system software controls the operation of the computer hardware within the system and enables the operation of other programs in the computer

4) Packaged software are a collection of programs that are oriented to perform interrelated tasks that a focused to a particular area, such as Microsoft Office.

Answer:

The impulse exerted by one cart on the other has a magnitude of 4 N.s.

Explanation:

Given;

mass of the first cart, m₁ = 2 kg

initial speed of the first car, u₁ = 3 m/s

mass of the second cart, m₂ = 4 kg

initial speed of the second cart, u₂ = 0

Let the final speed of both carts = v, since they stick together after collision.

Apply the principle of conservation of momentum to determine v

m₁u₁ + m₂u₂ = v(m₁ + m₂)

2 x 3 + 0 = v(2 + 4)

6 = 6v

v = 1 m/s

Impulse is given by;

I = ft = mΔv = m(

The impulse exerted by the first cart on the second cart is given;

I = 2 (3 -1 )

I = 4 N.s

The impulse exerted by the second cart on the first cart is given;

I = 4(0-1)

I = - 4 N.s (equal in magnitude but opposite in direction to the impulse exerted by the first).

Therefore, the impulse exerted by one cart on the other has a magnitude of 4 N.s.

Answer:

yes

Explanation:

because motion is relevant

Answer:

Motion is mathematically defined as displacement, distance, velocity, acceleration, speed, and time. The motion of a body is recognized by adding a frame of reference to an observer and measuring the change in position of the body related to that frame with the change in time.

Answer:

C. The number of shells increases from top to bottom

Explanation:

There are some trends about the periodic table, one of them is that in the vertical columns of periodic table, the number of shells increases from top to bottom.

From top to bottom in a periodic table, the number of electrons increases, thus more number of shells are needed to fill these electrons and the number of shells increases or we can say the atomic radius increases from top to bottom.

Hence, the correct option is "C".

Answer:

b. varies inversely with the square of the distance from the center of Earth.

Explanation:

Comparing the Newton's law of universal gravitation and second law of motion;

from Newton's second law of motion,

F = ma ............. 1

from New ton's law of universal gravitation,

F = [tex]\frac{GMm}{r^{2} }[/tex] ........... 2

Equating 1 and 2, we have;

mg =  [tex]\frac{GMm}{r^{2} }[/tex]

g = [tex]\frac{GM}{r^{2} }[/tex]

Therefore, the acceleration due to gravity near Earth, g, is inversely proportional to the square of the distance from the center of Earth.

Answer:

Inference

Explanation:

An inference involves the application of logic to progress from a premise to a conclusion or logical consequence on the basis of the evidence or known fact. Inference is a process of thought that be divided into a deduction and an induction aspect.

In the given question Halley, by standing outside was able to deduce the sound of thunder she is then able by inductive reasoning from the fact that storms are usually preceded by and accompany lightening, conclude that there is a storm coming.

Answer:

Both are the same.

Explanation:

[tex]pressure= \frac{force}{area} = \frac{f}{a} = \frac{n}{m {}^{2} } [/tex]

The SI unit was named after Bláise Pascal to honor him.

Hope this helps ;) ❤❤❤

Explanation:

Hi, there!!

Energy is defined as the capacity or ability to do work. It's SI unit is Joule.

here,

Joule = (kg×m×m)/(s×s)

= kg×m^2/s^2.

Therefore, the derived unit is kg.m^2 by s^2.

Hope it helps...

Explanation:

(i) The horizontal component of the tension in the right wire points right, and the horizontal component of the tension in the left wire points left.  Since these components are equal and opposite, the resultant horizontal force is 0.

∑Fₓ = 15 N cos 20° − 15 N cos 20°

∑Fₓ = 0 N

(ii) ∑Fᵧ = 15 N sin 20° + 15 N sin 20°

∑Fᵧ = 10.26 N

i) The resultant horizontal component of the tension forces is 0N

ii) The resultant vertical component of the tension forces is 10.26N

iii) The sum of force along the horizontal is zero because the force has the same magnitude and moving in the opposite direction.

i) From the given figure, the horizontal component of the force is given as;

[tex]F_x = + 15 cos 20^0 + (-15cos20^0)\\F_x = + 15 cos 20^0 -15cos20^0\\F_x =0[/tex]

The sum of force along the horizontal is zero because the force has the same magnitude and moving in the opposite direction.

ii) The vertical component of the force is expressed as

[tex]F_y = + 15 sin 20^0 + 15sin20^0)\\F_y = 2(15sin20^0)\\F_y=2(5.13)\\F_y=10.26N[/tex]

Hence the resultant vertical component of the tension forces is 10.26N

Learn more here: https://brainly.com/question/24524696

Answer:

K.E of truck > K.E of car

Explanation:

Mass of the truck = 8000Kg

K.E=[tex]\frac{1}{2} mv[/tex]

K.E =[tex]\frac{1}{2}*8000*v\\ 4000v[/tex]

Mass of the car = 1000 Kg

K.E of the car =[tex]\frac{1}{2}*1000*v\\ 500v[/tex]

Therefore Kinetic energy of the truck is greater than that of the car

Answer:

D

Explanation:

because light has no space nor mass

Answer:

1. a) Astronomers use the parallax method to measure the distance to nearby stars, but

we can’t use it to measure the distance to stars in other galaxies. Why not? Why isn’t the

parallax method useful for measuring the distances to stars in other galaxies?

They are so distant that the parallax is too small to be measured since parallax varies

inversely with distance.

b) Instead of the parallax method, we use the standard candle method to measure the

distance to stars in other galaxies. In particular, we use the standard candle method to

measure the distances to Cepheid variable stars in other galaxies. What is special about

Cepheid variable stars that makes them useful for this purpose?

We can figure out their luminosities from their periods of variation. Then if we measure

their fluxes we can calculate their distances.

2. a) From what were the protons and electrons in your body made, and roughly when

were they made?

They were made from energy (or gamma rays) very soon after the big bang (in the first

second). 400,000 years later they got together to make hydrogen atoms.

b) From what were the carbon atoms in your body made, and where were they made?

They were not made in the big bang. They were made much later inside of stars or in

supernovae. They were made by fusion from lighter atoms.

3. Make two sketches of the Milky Way Galaxy, one an edge-on view and one a face-on

view, labeling the various parts of the galaxy.

You should have labeled the

Answer:

The mass of the object and its height in the gravitational field of the Earth.

Explanation:

If we are talking about gravitational potential energy which is defined as:

[tex]U=m\,*\,g\,*\,h[/tex]

being "m" the object's mass, "g" the acceleration due to gravity, and "h" the height at which the object is located relative to the conventionally picked level for zero of potential energy.

As long as the value of "g" is constant, the only two variables that determine the gravitational potential energy are the mass (m) of the object and its relative height (h).

Answer:

The objects weight and height above Earth's surface

Explanation:

K12 :)

Answer:

because us equal to the anticlockwise moment about that pivot.If the object are balanced:clockwise.

Explanation:

This is when an object placed on something narrow object that can act as a pivot too fir example a plank placed on a brick.Finally the edges or the curve

Answer:

Moment about a point= force × perpendicular distance

When an object is further from the pivot, the perpendicular distance of the object from the pivot increases. Since moment is the product of the force and the perpendicular distance, when the perpendicular distance increase, the moment increases too. Thus, objects located further away from the pivot have a greater moment.

Answer:

the focal length of the mirror is :  [tex]f=-2.5\,\,cm[/tex]

Explanation:

Use the formula for the formation of image using a divergent mirror and recalling that the image (s') that this mirror formed is virtual, so it is entered as a negative number in the formula. Use the object position (s) as 10, the image position (s') as -2, and derive the value of the focal length:

[tex]\frac{1}{s} +\frac{1}{s'}=\frac{1}{f}\\\frac{1}{10} +\frac{1}{-2}=\frac{1}{f}\\\frac{1}{10} -\frac{1}{2}=\frac{1}{f}\\\frac{10\,f}{10} -\frac{10\,f}{2}=\frac{10\,f}{f}\\f-5\,f=10\\-4\,f=10\\f=-2.5\,\,cm[/tex]

Answer:

Explanation:

First of all we shall calculate the velocity of composite mass . Let it be v . Applying law of conservation of momentum

mu - MU = ( m + M ) v

v = mu - MU /  ( m + M )

loss of kinetic energy

= 1/ 2 mu² + 1/2 MU² - 1/2 ( M +m ) v²

= 1/ 2 mu² + 1/2 MU² - 1/2 ( M +m ) (mu - MU)² / ( m + M )²

= 1/ 2 mu² + 1/2 MU² - 1/2  (mu - MU)² / ( m + M )

= 1/2 [ m²u² + mMu² +mMU² + m²U² - m²u² - M²U² - 2 muMU ] /  ( m + M )

=  1 / 2 [ mMu² + mMU² - 2 muMU ] /  ( m + M )

= 1 / 2mM  [ (u² + U² - 2 uU)  /  ( m + M )]

= 1/2 mM  x k

where

k =  [ (u² + U² - 2 uU)  /  ( m + M )]

Given

m = .004 kg

M = 4 kg

u = 890 ms⁻¹

U = 7 ms⁻¹

k = ( 890² + 7² - 2 x 890 x 7 ) / 4.004

= ( 792100 + 49 - 12460 ) / 4.004

= 194727.52

loss of kinetic energy

= 1/2 mM  x k

= .5 x .004 x 4 x 194727.52

= 1557.82 J .

Answer:

Explanation:

Initial velocity (u) of the Bullet = 400 m/sec

Final velocity (v) of the Bullet = 100 m/sec

Bullet passed through the block in (t) = 0.0004 sec  

Using 1st Equation of motion :

400 m/s = 100 m/s - a (0.0004)

Deceleration of Bullet = 750,000 m/sec^2

(a) F (force exerted by the wooden block on the bullet) = F (force exerted by the bullet on the wooden block)

F = m * a = 0.008 * 750,000 = 6000 N

(b) Using 3rd Equation of motion :

[tex]v^{2} = u^{2} - 2aS[/tex]

10000 = 160000 - 2 * 750,000 * S

Thickness of wood (S) = 0.1 m

Answer:

its velocity, wavelength and frequency all change

Explanation:

Whenever a wave crosses the boundary between two media of different densities, its velocity, frequency and wavelength changes. This appears as a bending of the wave as it crosses the boundary from one medium to another.

Refraction is a fundamental property of waves. Hence when light is travelling from air into water, it wavelength, speed and frequency all changes at the interface between the two media.