Calculate the [OH-] in a solution with [H+] = 7.9*10(-5)M

The pressure would be seen to be inversely related to the volume.

Volume and pressure are inverse in relationship. Boyle's Law, which asserts that at a fixed temperature, a gas's pressure and volume are inversely proportional to one another, describes this relationship.

In other words, as long as the temperature stays constant, volume drops when pressure rises and vice versa. Thus what we have in the case that have been described above is an inverse relation between the pressure and the volume.

Learn more about pressure and volume:https://brainly.com/question/29258039

#SPJ1

The mass of NaOH in 120 mL of solvent is approximately 4800 g.  

To prepare 0. 20 M NaOH (40. 0 g/mol), you will need to dilute 34 g of NaOH to approximately 120 mL.

The molarity of a solution is the concentration of a solute (in this case, NaOH) in moles per liter (moles/L) and is typically reported in mol/L. To convert grams of solute to moles, we can use the following formula:

Moles (moles) = grams (g) / molar mass (g/mol)

For example, the molar mass of NaOH is 40. 0 g/mol, so 34 g of NaOH is equivalent to approximately 0. 82 mol of NaOH.

The molarity of a solution can be calculated using the following formula:

Molarity (moles/L) = moles of solute / liters of solvent

Therefore, the molarity of 0. 20 M NaOH is:

Molarity (moles/L) = 0. 82 mol / 1 L = 0. 82 mol/

To prepare 0. 20 M NaOH, we need to dilute 34 g of NaOH to approximately 120 mL of solvent. The mass of NaOH in 120 mL of solvent can be calculated using the following formula:

Mass (g) = volume (mL) x molar mass (g/mol)

For example, the volume of 120 mL of solvent is 120 mL, and the molar mass of NaOH is 40. 0 g/mol, so the mass of NaOH in 120 mL of solvent is:

Mass (g) = 120 mL x 40. 0 g/mol = 4800 g

Therefore, the mass of NaOH in 120 mL of solvent is approximately 4800 g.  

Learn more about mass Visit: brainly.com/question/86444

#SPJ4

A small dog pulled a 15 kilogram sled and caused an acceleration of 8 m/s². 120 Newtons force is applied to the sled.

Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration, can be used to determine how much force the small dog applied.

The direction in which the dog exerted the force must also be taken into account because force is a vector quantity, which means it has both a magnitude and a direction.

The formula can be used to determine how much force the dog is exerting.

mass times acceleration = force.

where force is measured in Newtons, acceleration measured in meters per second squared, and mass measured in kg.

Inputting the values provided yields:

force = 15 kg × 8 m/s² to 120 N.

As a result, the dog's force on the sled was 120 Newtons.

Learn more about Acceleration

https://brainly.com/question/30499732

#SPJ4

Avogadro's number helps to convert molecules into moles, the the number of moles in 3. 25 x 10²⁴ molecules of dihydrogen monoxide is equals to 5.4.

The number of molecules of dihydrogen monoxide = 3. 25 x 10²⁴ molecules

We have to calculate the number of moles in 3. 25 x 10²⁴ molecules of dihydrogen monoxide. The conversion of moles to molecules or molecules to moles is calculated by using the Avogadro's number (6.022 x 10²³ ). The Avogadro constant, generally represented by NA. The number of molecules in one mole of substance = 6.022 x 10²³ molecules

Now, to convert molecules into moles we have to divide the number of molecules by Avogadro's number. So, the moles in 3. 25 x 10²⁴ molecules of dihydrogen monoxide = [tex]\frac{3.25 × 10²⁴ }{6.022×10²³} [/tex]

= 5.39 ~ 5.4

Hence, required value is 5.4.

For more information about moles, refer:

https://brainly.com/question/13314627

#SPJ4

The equilibrium concentration of OH⁻ at 15°C is 4.5 × 10⁻⁷ M. To answer this question, we need to use the equation for the ion product constant of water, kw = [H⁺][OH⁻]. At equilibrium, the concentration of H⁺and OH⁻are equal.

We can use the equilibrium concentration of either ion to find the equilibrium concentration of the other.
Step by step explanation:
1. Write the equation for the ion product constant of water: kw = [H⁺][OH⁻].
2. Since the concentration of H⁺ and OH⁻ are equal at equilibrium, we can use either ion's concentration to find the other.
3. We are given the value of kw at 15°C, which is 4.5 × 10⁻¹⁴.
4. Substitute this value into the equation for kw: 4.5 × 10⁻¹⁴ = [H⁺][OH⁻].
5. We are asked to find the equilibrium concentration of OH⁻, so we can rearrange the equation: [OH⁻] = kw/[OH⁻].
6. To find the equilibrium concentration of OH⁻, we need to know the equilibrium concentration of  H⁺. At 15°C, we can use the following equation to find the equilibrium concentration of  H⁺:

       pH + pOH = 14

  where pH is the negative logarithm of [ H⁺], and pOH is the negative logarithm of [OH⁻]. At equilibrium, pH = pOH, so we can simplify the equation to:
       2pH = 14

  which gives us:
       pH = 7

7. Since pH = 7, we know that [H⁺] = 10⁻⁷ M.
8. Now we can substitute this value into the equation we derived in step 5 to find the equilibrium concentration of OH⁻:

       [OH-] = kw/[H⁺] = (4.5 × 10⁻¹⁴)/(10⁻⁷) = 4.5 × 10⁻⁷ M

Therefore, the equilibrium concentration of OH⁻ at 15°C is 4.5 × 10⁻⁷ M.

Learn more about equilibrium concentration here:

https://brainly.com/question/29136736

#SPJ1

The electrical charge of the atom is zero. This is because the number of protons, which carry a positive charge, is equal to the number of electrons, which carry a negative charge. The neutrons, which carry no charge, do not contribute to the electrical charge of the atom. Therefore, the atom has a neutral charge overall.

An atom has three types of subatomic particles: protons, neutrons, and electrons. Protons have a positive electrical charge (+1), electrons have a negative electrical charge (-1), and neutrons have no electrical charge (0).
In your atom, there are:
- 5 protons, each with a charge of +1
- 6 neutrons, each with a charge of 0
- 5 electrons, each with a charge of -1
To find the total electrical charge of the atom, you can add the charges of all the subatomic particles together:
(5 protons × +1 charge/proton) + (6 neutrons × 0 charge/neutron) + (5 electrons × -1 charge/electron) = 5 + 0 - 5 = 0
The total electrical charge of this atom is 0. This means the atom is neutral, as the number of positive charges (protons) equals the number of negative charges (electrons).

Learn more about electrons here

https://brainly.com/question/21127311

#SPJ11

The total energy required to raise the temperature of a 47.3 g sample of liquid ethanol from -69.5 °C to 107.4 °C at constant pressure is 9,738.4 J.


To calculate the total energy required to raise the temperature of the liquid ethanol, we need to use the specific heat capacity of ethanol and the equation:

Q = m × c × ΔT

where Q is the total energy required, m is the mass of the sample, c is the specific heat capacity of ethanol, and ΔT is the change in temperature.

First, we need to calculate the change in temperature:

ΔT = 107.4 °C - (-69.5 °C) = 177.9 °C

Next, we need to find the specific heat capacity of ethanol. According to literature values, the specific heat capacity of ethanol is 2.44 J/g·°C.

Now we can plug in the values and solve for Q:

Q = (47.3 g) × (2.44 J/g·°C) × (177.9 °C)

Q = 9,738.4 J

Therefore, the total energy required to raise the temperature of the liquid ethanol from -69.5 °C to 107.4 °C at constant pressure is 9,738.4 J.

To learn more about energy , visit;

https://brainly.com/question/13881533

#SPJ11

The compound that is base-insoluble is A) PbCl2

To identify the base-insoluble compound, we can analyze each option:

A) PbCl2 (Lead(II) chloride) - This compound is sparingly soluble in water, and it does not dissolve in bases.
B) Sb2S3 (Antimony(III) sulfide) - This compound is slightly soluble in water and reacts with bases to form soluble thioantimonates.
C) NiS (Nickel(II) sulfide) - This compound is also slightly soluble in water and reacts with bases to form soluble thionickelates.
D) Ca3(PO4)2 (Calcium phosphate) - This compound is insoluble in water but becomes soluble in bases by forming complex ions.
E) KCl (Potassium chloride) - This compound is soluble in both water and bases.

Thus, PbCl2 is the compound that is base-insoluble.

To know more about Base Insoluble compound:

https://brainly.com/question/24300575

#SPJ11

Cis and trans isomers are not enantiomers, they are diastereomers. Diastereomers are stereoisomers that are not mirror images of each other, but have different physical and chemical properties.

Cis-trans isomers, also known as geometric isomers, are a type of diastereomers, not enantiomers. Cis-trans isomers have different spatial arrangements of the same functional groups around a double bond or a ring structure. Enantiomers, on the other hand, are non-superimposable mirror images of each other. Diastereomers are stereoisomers that are not mirror images, which is the case for cis-trans isomers.

To know more about Cis-trans isomers visit:

https://brainly.com/question/30760053

#SPJ11

Cis and trans isomers are not enantiomers as they do not have chiral centers. They are more commonly referred to as geometric isomers.

Cis and trans isomers are not enantiomers but rather diastereomers. Enantiomers are non-superimposable mirror images of each other, while diastereomers are non-superimposable non-mirror images. They are also not necessarily diastereomers, as they can have identical chemical and physical properties  Cis-trans isomers are a type of diastereomer that have different spatial arrangements of substituents around a double bond or a ring structure. Another name for cis-trans isomers is geometric isomers.

To know more about Cis-Trans Isomers:

https://brainly.com/question/28177519

#SPJ11

The answer is "the pressure, the volume, or both, may increase." According to the Ideal Gas Law, when the temperature of an ideal gas increases, the pressure and volume can change in different ways depending on the initial conditions of the gas. If the gas is kept at a constant volume, then the pressure will increase. If the gas is kept at constant pressure, then the volume will increase. If the gas is allowed to expand or compress, then both the pressure and volume may change. Therefore, the correct answer is that the pressure, the volume, or both, may increase.

According to the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature. When the temperature (T) increases, the product of pressure (P) and volume (V) must also increase to maintain the equation's balance. This means that either the pressure, the volume, or both may increase to compensate for the increased temperature. The specific outcome depends on the conditions of the system, such as whether it's enclosed or allowed to expand.

Learn more about ideal gas law at https://brainly.com/question/20348074

#SPJ11

To name cyclic carboxylic acids, identification of the carboxylic acid, size determination of ring, choosing of correct prefix and replacement of ane with oic acid are the main steps followed.

1. Identify the cyclic carboxylic acid: Cyclic carboxylic acids are organic compounds where a carboxylic acid (-COOH) functional group is bonded to a cyclic structure.

2. Determine the size of the ring: Count the number of carbon atoms in the ring, including the one bonded to the carboxylic acid group.

3. Choose the appropriate prefix: Based on the size of the ring, select the correct prefix for the main part of the name (e.g., "cyclopropane" for a 3-carbon ring, "cyclobutane" for a 4-carbon ring, etc.).

4. Replace the "ane" ending with "oic acid": Change the "ane" ending in the prefix to "oic acid" to indicate the presence of the carboxylic acid functional group (e.g., "cyclopropanoic acid" for a 3-carbon ring with a carboxylic acid group).

So, for naming cyclic carboxylic acids, first identify the cyclic structure, count the carbon atoms in the ring, select the appropriate prefix, and replace the "ane" ending with "oic acid."

Learn more about carboxylic acids : https://brainly.com/question/26855500

#SPJ11

The discovery of oil and the growth of the oil industry played a significant role in the industrialization of Texas. Here are two ways in which they contributed to this process:

1. Economic diversification: Before the discovery of oil, Texas was primarily an agricultural state. However, with the growth of the oil industry, Texas was able to diversify its economy and expand into other sectors, such as manufacturing and transportation. This diversification led to the development of new industries and job opportunities, which in turn spurred economic growth and prosperity.

2. Urbanization: The discovery of oil and the boom in the oil industry led to the growth of cities in Texas. As people flocked to the state in search of work in the oil fields or related industries, cities such as Houston and Dallas experienced rapid population growth. This growth led to the development of new infrastructure, such as roads, bridges, and public transportation systems, which helped to further industrialize the state. Additionally, the growth of urban areas in Texas led to the development of new cultural institutions, such as museums and universities, which helped to foster a sense of community and identity in the state.

To know more about cyclical industry, click here:-

https://brainly.com/question/31158274

#SPJ11

The weak diprotic acid among the given options. The weak diprotic acid is:

C) H2SO3

A diprotic acid is an acid that can donate two protons (H+ ions) per molecule. A weak acid is one that does not completely dissociate in water. Among the given options, H2SO3 (sulfurous acid) is both diprotic and weak. Here's a brief explanation for each option:

A) HNO3 - Nitric acid is a strong monoprotic acid (donates one proton).
B) H3PO4 - Phosphoric acid is a weak triprotic acid (donates three protons).
C) H2SO3 - Sulfurous acid is a weak diprotic acid (donates two protons).
D) HClO4 - Perchloric acid is a strong monoprotic acid (donates one proton).
E) H2SO4 - Sulfuric acid is a strong diprotic acid (donates two protons).

To know more about weak diprotic acid :

https://brainly.com/question/9434046

#SPJ11

The areas where the stirrer join the coffee cup and the thermometer join the liquid are the most likely places for heat leaks in the coffee cup calorimeter system.

Heat leaking from these points can affect the accuracy of the experiment. The connection between the stirrer and the coffee cup is a potential source of heat leak because of the gap between the two. Heat can also escape from the thermometer when it is inserted into the liquid.

Additionally, the bottom of the cup is another source of heat leak because it is exposed to the environment. Heat can enter or leave the cup from the bottom, compromising the accuracy of the experiment.

know more about thermometer here

https://brainly.com/question/24189042#

#SPJ11

The term "concerted" in the context of an SN2 (bimolecular nucleophilic substitution) reaction means that the entire reaction occurs in a single step.

The nucleophile attacks the electrophilic carbon while the leaving group is leaving, leading to the simultaneous formation of new bonds and breaking of old bonds. This type of reaction mechanism is in contrast to stepwise reactions, where the formation of intermediate species is required before the final product is formed.

The term "nucleophilic" refers to the species that donates a pair of electrons to form a new bond, while "substitution" refers to the replacement of one functional group with another. Overall, the SN2 reaction is a type of nucleophilic substitution where the nucleophile attacks the electrophilic carbon in a concerted manner.

For more information on nucleophilic substitution reaction refer https://brainly.com/question/14052597

#SPJ11

In semiconductors, Boron acts as a donor, i.e. electrons are introduced into the conduction band when added as impurities to silicon. Option C is the correct answer.

When boron impurities are added to silicon, it acts as a donor, which means that it introduces electrons into the conduction band of silicon. This results in an excess of electrons, which increases the conductivity of the material.

This process is called doping and is used in the semiconductor industry to create p-type semiconductors. The addition of boron impurities creates a p-type semiconductor because the extra electrons in the conduction band create "holes" in the valence band. These holes behave like positive charges and are free to move throughout the material.

Learn more about semiconductors at

https://brainly.com/question/15184439

#SPJ4

First, let's balance the chemical equation:

Mg(OH)2(aq) + 2 HCl(aq) → MgCl2(s) + 2 H2O(l)

Now, let's calculate the molar masses of the compounds involved using the average atomic masses from the periodic table:

Molar mass of Mg(OH)2 = (1 x atomic mass of Mg) + (2 x atomic mass of O) + (2 x atomic mass of H)

= (1 x 24.31 g/mol) + (2 x 15.999 g/mol) + (2 x 1.008 g/mol)

= 58.33 g/mol

Molar mass of HCl = (1 x atomic mass of H) + (1 x atomic mass of Cl)

= (1 x 1.008 g/mol) + (1 x 35.453 g/mol)

= 36.46 g/mol

Molar mass of MgCl2 = (1 x atomic mass of Mg) + (2 x atomic mass of Cl)

= (1 x 24.31 g/mol) + (2 x 35.453 g/mol)

= 95.21 g/mol

Molar mass of H2O = (2 x atomic mass of H) + (1 x atomic mass of O)

= (2 x 1.008 g/mol) + (1 x 15.999 g/mol)

= 18.02 g/mol

Now, let's calculate the total mass on both sides of the equation:

Left side:

Mg(OH)2(aq) + 2 HCl(aq)

Molar mass of Mg(OH)2 = 58.33 g/mol

Molar mass of HCl = 2 x 36.46 g/mol = 72.92 g/mol

Total mass on left side = 58.33 g/mol + 72.92 g/mol = 131.25 g/mol

Right side:

MgCl2(s) + 2 H2O(l)

Molar mass of MgCl2 = 95.21 g/mol

Molar mass of H2O = 2 x 18.02 g/mol = 36.04 g/mol

Total mass on right side = 95.21 g/mol + 36.04 g/mol = 131.25 g/mol

As we can see, the total mass on both sides of the equation is equal (131.25 g/mol), which demonstrates that both sides of the equation have equal masses, satisfying the law of conservation of mass.

The value of ΔH° for CS₂(l) + 6H₂O₂(l) → CO₂(g) + 6H₂O(l) + 2SO₂(g) is -1651 kJ.

value of ΔH° for the reaction CS₂(l) + 6H₂O₂(l) → CO₂(g) + 6H₂O(l) + 2SO₂(g) can be calculated using Hess's law. Hess's law states that the enthalpy change of a reaction is the same whether it occurs in one step or several steps.

In this case, we can break the reaction down into three smaller steps which will help us calculate the enthalpy change of the overall reaction. The first step is CS₂(l) + 3O₂(g) → CO₂(g) + 2SO₂(g) with a ΔH° of -1077 kJ. The second step is H₂(g) + O₂(g) → H₂O₂(l) with a ΔH° of -188 kJ. The third step is H₂(g) + ½O₂(g) → H2O(l) with a ΔH° of -286 kJ.

By adding all three of these enthalpy changes together, we can calculate the enthalpy change of the overall reaction to be -1651 kJ.

Know more about Hess's law here

https://brainly.com/question/31508978#

#SPJ11

Answer:

The two correct statements about the molecules of butane gas in the cylinder are:

- Further apart than those in the liquid

- The gas molecules exert a pressure on the inside of the cylinder.

The moving molecules cause this pressure because they collide with the walls of the cylinder and exert a force on them, creating a pressure. More collisions per unit time mean a higher pressure.

Explanation:

Biosignatures are chemical and physical indicators that can only be produced by life. The search for biosignatures on other planets is a key focus in the search for extraterrestrial life. A wide range of biosignatures have been identified, including the presence of specific chemical compounds, isotopic ratios, and physical structures such as microfossils.

Out of the options provided, the presence of carbon dioxide in the atmosphere (option a) would not be considered a biosignature, as it can be produced by both biological and non-biological processes. Carbon dioxide is a common component of planetary atmospheres and can be produced by geological activity as well as by biological processes such as respiration and photosynthesis.

In contrast, the other options provided are all potential biosignatures. For example, the presence of insoluble manganese oxides (option b) has been suggested as a potential indicator of microbial activity, as certain bacteria are known to produce these minerals. The decreased 12C/13C isotopic ratio (option c) can also be a biosignature, as some forms of life preferentially use certain isotopes of carbon, leading to distinctive isotopic ratios in their environment. Similarly, homochirality of certain molecules (option d) is a potential biosignature, as this phenomenon is thought to be a consequence of life's chemistry.

Overall, the search for biosignatures is an exciting area of research that has the potential to provide evidence of extraterrestrial life. By identifying distinctive chemical and physical indicators that can only be produced by living organisms, scientists can begin to explore the possibility of life beyond our own planet.

More on biosignatures: https://brainly.com/question/27952600

#SPJ11

The pH of a substance with a hydrogen ion concentration of 1.2 ×10⁻²m can be found using the formula: pH = -log[H+]. Plugging in the given hydrogen ion concentration, we get pH = -log(1.2 ×10⁻²)= 1.92. Therefore, the pH of the substance is 1.92.

Hi! To calculate the pH of a substance with a hydrogen ion concentration of 1.2 × 10⁻²M, you can use the pH formula:

pH = -log10([H+])

where [H+] represents the hydrogen ion concentration.

Step 1: Substitute the hydrogen ion concentration into the formula:
pH = -log10(1.2 × 10⁻²)

Step 2: Calculate the pH using the given hydrogen ion concentration:
pH ≈ 1.92

Therefore, the pH of the substance with a hydrogen ion concentration of 1.2 ×10⁻²M is approximately 1.92.

To know more about ph visit :-

https://brainly.com/question/15075648

#SPJ1

To form an amide, a carboxylic acid can react with either an amine or ammonia. Apart from that, we need a dehydrating agent.

The reaction between carboxylic acid and amine or ammonia is called amidation and it involves substitution, as the -OH group in the carboxylic acid is replaced with the -NH2 group from the amine or ammonia.The process involves a nucleophilic acyl substitution reaction, where the amine acts as a nucleophile and attacks the carbonyl carbon of the carboxylic acid, resulting in the formation of an amide.

Learn more about amide : https://brainly.com/question/11622057

#SPJ11

The radioactive of the specimen will decline to 10 kbq approximately 64.7 seconds after the initial measurement of 70 kbq.t

To answer this question, we need to use the radioactive decay law, which states that the activity of a radioactive sample is proportional to the number of radioactive nuclei present and is given by the equation:

A = A0 e^(-λt)

where A is the activity at time t, A0 is the initial activity, λ is the decay constant, and e is the mathematical constant equal to approximately 2.718.

We are given the decay constant of the nuclide, which is λ = 3.1 x 10^-3 s^-1, and the initial activity of the specimen, which is A0 = 70 kbq. We want to find the time it takes for the activity to decline to 10 kbq, which we will call t.

So we can rearrange the equation to solve for t:

t = (ln(A0/A)) / λ

Plugging in the values we have:

t = (ln(70/10)) / 3.1 x 10^-3
t = 64.7 seconds (to three significant figures)

Therefore, the activity of the specimen will decline to 10 kbq approximately 64.7 seconds after the initial measurement of 70 kbq.

Learn more about radioactive decay law

brainly.com/question/1770619

#SPJ11

True. Chemical reactions with free energy changes close to zero are at equilibrium, meaning that the forward and reverse reactions are occurring at equal rates.

The concentrations of products and reactants are then regulated to maintain this equilibrium state. The change in free energy (ΔG) is the difference between the heat released during a process and the heat released for the same process occurring in a reversible manner. If a system is at equilibrium, ΔG = 0. Hence the reaction attains equilibrium when the free energy change accompanying it is zero. If we begin with a large concentration of reactants, the free energy of reactants is much greater than the products, and the reaction proceeds.

Learn more about equilibrium here: https://brainly.com/question/30807709

#SPJ11

The two variables that determine the total change in entropy in a system are temperature and the amount of heat transferred.

The two variables that determine the total change in entropy in a system are the temperature and the amount of heat transferred.

Temperature and heat are both important factors that affect the randomness and disorder of the particles in a system.

As heat is transferred, the particles move around more randomly, increasing entropy. The higher the temperature, the greater the amount of heat needed to achieve a certain change in entropy.

Therefore, both temperature and heat must be taken into account when calculating the total change in entropy in a system.

Learn more about variables

brainly.com/question/17344045

#SPJ11

When a strip of Zn is placed in a beaker containing 0.1 m HCl, H₂(g) evolves. if a strip of al is placed in a beaker containing 0.1 m HCl, does H₂(g) evolve, yes Al is oxidized and H⁺(aq) is reduced. Hence, option B is correct.

Generally, reduction is defined as any of a class of chemical reactions in which the number of electrons related with an atom or a group of atoms is increased. In reduction the electrons are taken up by the substance reduced are supplied by another substance, which is thereby oxidized.

Hence, the answer to this question is B. Since a new solid forms when Al(s) is mixed with Zn²⁺(aq), it is reasonable to assume that Al(s) is more susceptible to oxidation than Zn(s).

Learn more about reduction from the link given below.

https://brainly.com/question/28813812

#SPJ4

Deprotonation of the alpha carbon is performed by a strong base, such as sodium hydride (NaH), potassium hydride (KH), lithium diisopropylamide (LDA), or tert-butoxide (t-BuO-).

For example, sodium hydride (NaH) can be used to deprotonate the alpha carbon of a ketone or aldehyde to form an enolate intermediate:

[tex]R2C=O + NaH -- > R2 C=O^-Na+ + H2[/tex]

R2C=O + NaH → R2C=O^-Na+ + H2

Lithium diisopropylamide (LDA) is also commonly used to deprotonate the alpha carbon of a carbonyl compound to form an enolate intermediate:

[tex]R2C=O + LDA --- > R2C=O^- + LDAH[/tex]

R2C=O + LDA → R2C=O^- + LDAH

Once the enolate intermediate is formed, it can undergo a variety of reactions, such as aldol condensation, Michael addition, and Claisen condensation.

The reactivity of the enolate intermediate depends on whether it is kinetically or thermodynamically controlled.

To know more about Deprotonation of the alpha carbon:

https://brainly.com/question/29222040

The common name of an alcohol is a widely recognized name, while the IUPAC name is a systematic name that follows specific naming rules and provides more information about the compound's structure

The common name of an alcohol typically refers to the name that is widely used and easily recognized by most people. These names often do not follow any standardized nomenclature rules. An example of a common name for an alcohol is "ethyl alcohol" (also known as ethanol).
The IUPAC (International Union of Pure and Applied Chemistry) name, on the other hand, is a systematic name that follows a set of standardized rules for naming chemical compounds. The IUPAC name provides more information about the compound's structure. For example, the IUPAC name for ethanol is "ethan-1-ol," which indicates that it has a two-carbon chain (eth-) with an alcohol functional group (-ol) attached to the first carbon atom.

Learn more about  IUPAC here, https://brainly.com/question/28872356

#SPJ11

Based on the options provided, the triprotic acid is option B) H3PO4 (Phosphoric acid).

A triprotic acid is an acid that can donate three protons (H+) in a solution.

It can donate three protons successively in the solution, making it a triprotic acid.

         O

         ||

H-O - P - O-H

         |

        O-H

To know more about acids, click below.

brainly.com/question/29796621

#SPJ11

The student was randomly given the compounds e and f from the group of the compounds. The test will be most appropriate for the distinguish compounds e and f is the Tollen's reagent test.

The Tollens' reagent test, is also known as the silver-mirror test, it is the qualitative laboratory test which is used to the distinguish in between the aldehyde and the ketone. The test will be exploits the fact that the aldehydes are the readily oxidized and whereas the ketones are not.

The Tollens' reagent is the alkaline solution of the ammoniacal silver nitrate and this reagent is used to test for the aldehydes.

To learn more about Tollen's reagent here

https://brainly.com/question/14356309

#SPJ4