calculate the ph of a solution that is 0.080 m in trimethylamine, (ch3)3n , and 0.13 m in trimethylammonium chloride, ( (ch3)3nhcl ).

The balanced redox reaction in basic solution is:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + 2OH⁻(aq) + H₂(g).

To balance the redox reaction in basic solution, we follow these steps:

1. Write the unbalanced equation:

Br⁻(aq) + H₂O(l) → Br₂(aq) + H₂(g)

2. Identify the oxidation states of each element:

Br⁻: -1

H₂O: 0

Br₂: 0

H₂: 0

3. Determine the elements being oxidized and reduced:

In this reaction, Br⁻ is being oxidized to Br₂, while H₂O is being reduced to H₂.

4. Balance the atoms that are undergoing the oxidation and reduction reactions:

Since there are two bromine atoms in Br₂, we need to balance the number of bromine atoms on the left side. To do this, we place a coefficient of 2 in front of Br⁻:

2Br⁻(aq) + H₂O(l) → Br₂(aq) + H₂(g)

Now, the bromine atoms are balanced, but the hydrogen atoms are not.

5. Balance the hydrogen atoms by adding water (H₂O) molecules to the side that needs more hydrogen atoms. In this case, we need 2 hydrogen atoms on the right side, so we add 2 water molecules to the left side:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + H₂(g)

6. Balance the oxygen atoms by adding hydroxide ions (OH⁻) to the side that needs more oxygen atoms. In this case, we need 2 oxygen atoms on the left side, so we add 2 hydroxide ions to the right side:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + 2OH⁻(aq) + H₂(g)

7. Check and balance the charges:

On the left side, the total charge is 2(-1) = -2. On the right side, the total charge is 2(-1) + (-2) = -4. To balance the charges, we add 2 electrons (e⁻) to the left side:

2Br⁻(aq) + 2H₂O(l) + 2e⁻ → Br₂(aq) + 2OH⁻(aq) + H₂(g)

8. Combine the half-reactions and cancel out any common terms:

The balanced half-reactions are:

Reduction: 2H₂O(l) + 2e⁻ → H₂(g) + 2OH⁻(aq)

Oxidation: 2Br⁻(aq) → Br₂(aq) + 2e⁻

Multiplying the reduction half-reaction by 2 and adding the equations gives the balanced overall redox reaction:

2Br⁻(aq) + 2H₂O(l) + 2e⁻ → Br₂(aq) + 2OH⁻(aq) + H₂(g)

Therefore, the balanced redox reaction in basic solution is:

2Br⁻(aq) + 2H₂O(l) → Br₂(aq) + 2OH⁻(aq) + H₂(g)

To know more about the redox reaction refer here :

https://brainly.com/question/13293425#

#SPJ11

The correct answer is:

(c) poor hydrogen-ion acceptor.

The given Ka value of carbonic acid (H2CO3) indicates its acidity and the extent to which it donates hydrogen ions (H+).

Ka is the acid dissociation constant, which measures the degree of ionization of an acid in aqueous solution. A higher Ka value indicates a stronger acid, meaning it donates hydrogen ions readily.

In this case, the Ka value of carbonic acid is 4.3×10−7, which is relatively small. This indicates that carbonic acid is a weak acid and donates hydrogen ions to a lesser extent.

Therefore, the correct answer is:

(c) poor hydrogen-ion acceptor.

To know more about hydrogen ion visit:

https://brainly.com/question/3823563

#SPJ11

The balanced chemical equation for the reaction of 76 g of SnO2 and 2 H2 can be represented as: SnO2 + 2 H2 → Sn + 2 H2O

To calculate the amount of Sn formed, we need to first find the limiting reactant and the theoretical yield of Sn. The molar mass of SnO2 = 150.71 g/mol. The number of moles of SnO2 present in 76 g of SnO2 can be calculated as: Number of moles of SnO2 = mass / molar mass Number of moles of SnO2 = 76 / 150.71 = 0.504 mol. The molar mass of H2 = 2.02 g/mol

The number of moles of H2 required for the reaction can be calculated as: Number of moles of H2 = 0.504 mol / 2 = 0.252 mol, The molar mass of Sn = 118.71 g/mol, The theoretical yield of Sn can be calculated using the balanced chemical equation:1 mol of SnO2 produces 1 mol of Sn. So, 0.504 mol of SnO2 will produce 0.504 mol of Sn. The mass of Sn can be calculated as: Mass of Sn = number of moles of Sn × molar mass of Sn, Mass of Sn = 0.504 × 118.71 = 59.83 g. Therefore, 59.83 grams of Sn are formed.

To know more about chemical equation refer to:

https://brainly.com/question/11574373

#SPJ11

Acetaldehyde and benzaldehyde reactants would give the possible aldol condensation product shown. Aldol condensation is a reaction between aldehydes or ketones with α-hydrogen atoms.

The reaction results in an α,β-unsaturated carbonyl compound, aldol product. Aldol condensation is a significant reaction in organic chemistry, which can happen under both acidic and basic conditions. This reaction happens when the alpha carbon of one aldehyde or ketone attacks the carbonyl carbon of another aldehyde or ketone. It's called a condensation reaction because it produces a new molecule and eliminates water as a side product.

Each aldehyde or ketone has a hydrogen atom next to the carbonyl group. During the aldol condensation, an alpha hydrogen from one molecule is removed and an alpha carbon-carbon bond is formed by the nucleophilic addition of the enolate ion to the carbonyl carbon of another molecule of aldehyde or ketone.In this case, the reactants which are Acetaldehyde and benzaldehyde produce the following possible aldol condensation product.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

The Gibbs free energy change (ΔG) for the reaction can be calculated using the equation ΔG = ΔG' + RTln(Q), where ΔG' is the standard Gibbs free energy change, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.

In the given reaction, the equilibrium constant (Keq) is 1.97 at 25.0 °C. The standard Gibbs free energy change (ΔG') for the reaction is -1.679 kJ/mol.

To calculate the actual Gibbs free energy change (ΔG) for the reaction when the concentrations are adjusted, we can use the equation ΔG = ΔG' + RTln(Q), where R is the gas constant and T is the temperature in Kelvin.

However, since the values of R and T are not provided, we cannot calculate the exact value of ΔG without these parameters. The value of ΔG would depend on the specific temperature and the gas constant used.

Therefore, without the specific values of R and T, we cannot determine the exact value of ΔG.

learn more about Gibbs free energy change

brainly.com/question/10052725

#SPJ11

In a hydrogen fuel cell, the cathode is where the reduction reaction occurs. The reduction reaction in a hydrogen fuel cell involves the reaction of oxygen (O2) with electrons and protons from the anode to produce water (H2O). Therefore, the correct answer is B. O2.

The other options you provided are:

A. KOH (Potassium Hydroxide) - KOH is often used as an electrolyte in alkaline fuel cells, not as the cathode material.

C. Li (Lithium) - Lithium is not typically used as the cathode material in hydrogen fuel cells.

D. H2 (Hydrogen) - Hydrogen is the fuel that is supplied to the anode of the fuel cell.

E. Pt (Platinum) - Platinum is often used as a catalyst material on the cathode side of a hydrogen fuel cell, but it is not the cathode itself.

Click the below link, to learn more about cathode :

https://brainly.com/question/32063482

#SPJ11

According to Le Châtelier's principle, the equilibrium of a weak acid or weak base will shift in response to the perturbation and attempt to restore equilibrium.

Le Châtelier's principle predicts how the system will react when any factor that affects the equilibrium of a chemical system is changed. It states that when a system at equilibrium is disturbed by changing any one of the factors, the system will react in such a way as to counteract the disturbance and reestablish equilibrium.

To elaborate, if we upset the equilibrium of a weak acid or weak base by adding more acid, more base, more salt, or changing the temperature, the reaction would move to counteract the change and return to equilibrium. For example, if we add more acid, the reaction will shift to the left to use up some of the added acid, while if we add more base, the reaction will shift to the right to use up some of the added base.

Similarly, if the temperature is increased, the reaction will shift in the direction that absorbs heat, while if the temperature is decreased, the reaction will shift in the direction that releases heat.

Learn more about Le châtelier's principle: https://brainly.com/question/12099569

#SPJ11

The equilibrium of a weak acid or base will be upset if any factor that affects the concentration of one of the species in a reaction mixture is changed. The system will then shift in the direction that will minimize the effect of the imposed change, and re-establish equilibrium.

According to Le Châtelier's principle, if the equilibrium of a weak acid or weak base were upset, it would tend to restore the equilibrium state. Any factor that affects the concentration of one of the species in a reaction mixture at equilibrium will also affect the concentration of the other species. Therefore, the system will shift in the direction that reduces the effect of the imposed change.According to this principle, a system at equilibrium will respond to a stress in a way that will counteract the stress and re-establish equilibrium. A weak acid or base is one that only partially dissociates in water. This means that the acid or base exists in equilibrium with its ions. The extent of ionization depends on the strength of the acid or base and the concentration of the species involved.

To know more about equilibrium visit:

https://brainly.com/question/30694482

#SPJ11

Aspirin is an analgesic and anti-inflammatory drug with chemical formula C9H8O4, there is only one sp3 hybridized carbon present in aspirin. Naproxen contains one sp3 hybridized carbon and three sp2 hybridized carbons. The similarities in the structures of aspirin, ibuprofen, and naproxen include the presence of a carboxylic acid functional group, a phenyl ring, and an aromatic ring. They also exhibit analgesic and anti-inflammatory properties.

Aspirin is an analgesic and anti-inflammatory drug with chemical formula C9H8O4. Its structure comprises of a carboxylic acid group attached to a phenyl ring and a carbonyl group attached to another phenyl ring. The molecule contains one sp3 hybridized carbon that is bonded to three oxygen atoms (two of which are in the carboxylic acid group), and another sp2 hybridized carbon that is part of the carbonyl group. Therefore, there is only one sp3 hybridized carbon present in aspirin.On the other hand, naproxen contains one sp3 hybridized carbon and three sp2 hybridized carbons, as the molecule has a carboxylic acid group attached to a phenyl ring and two other phenyl rings attached to the main chain.The molecular formula of acetaminophen is C8H9NO2. The structure of acetaminophen is similar to that of aspirin, with a benzene ring connected to an amide functional group. The similarities in the structures of aspirin, ibuprofen, and naproxen include the presence of a carboxylic acid functional group, a phenyl ring, and an aromatic ring. They also exhibit analgesic and anti-inflammatory properties.

To know more about anti-inflammatory visit:

https://brainly.com/question/32615185

#SPJ11

a. The sp³ hybridized carbons that are present in aspirin is one.

b. The sp² hybridized carbons that are present in naproxen is three.

c. The molecular formula of acetaminophen is C₈H₉NO₂.

d. Similarities of the structure of aspirin, ibuprofen and naproxen is have a carboxylic acid group and a cyclic ring structure.

There is only one sp³ hybridized carbon in aspirin. The sp³ hybridized carbon in aspirin is the carbon in the carboxylic acid functional group, which is bonded to the oxygen atom.

In naproxen, there are three sp² hybridized carbons present. These carbons are present in the three aromatic rings present in naproxen. The molecular formula of naproxen is C₁₄H₁₄O₃.

Similarities of the structure of aspirin, ibuprofen, and naproxen:

Learn more about aspirin: https://brainly.com/question/31597007

#SPJ11

A Brønsted-Lowry acid is defined as a substance that donates a hydrogen ion to another substance, while a Brønsted-Lowry base is defined as a substance that accepts a hydrogen ion. Therefore, here is how to identify whether each species functions as a Brønsted-Lowry acid or a Brønsted-Lowry base in a net ionic equation:

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l),

the net ionic equation is

H+(aq) + OH-(aq) → H2O(l).

In this equation, H+ donates a hydrogen ion to OH-, so H+ functions as a Brønsted-Lowry acid, and OH- accepts a hydrogen ion from H+, so OH- functions as a Brønsted-Lowry base

Net ionic equations are chemical equations that show only the species that participate in a chemical reaction. The other species are not included in the equation because they do not take part in the reaction. In the net ionic equation, the species that donate hydrogen ions are identified as Brønsted-Lowry acids and those that accept hydrogen ions are identified as Brønsted-Lowry bases. For example, in the reaction

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l),

the net ionic equation is

H+(aq) + OH-(aq) → H2O(l).

In this equation, H+ donates a hydrogen ion to OH-, so H+ functions as a Brønsted-Lowry acid, and OH- accepts a hydrogen ion from H+, so OH- functions as a Brønsted-Lowry base. Therefore, the answer to the given question cannot be determined without a net ionic equation.

To know more about Brønsted-Lowry acid visit:

https://brainly.com/question/32276007

#SPJ11

The molarity of the solution is 0.424 M.

To find the molarity of 408 ml of solution made with 9.72 g of KOH, we first need to calculate the number of moles of KOH present in the solution. Molarity is the number of moles of solute per liter of solution. So, Number of moles of KOH = mass / molar mass = 9.72 g / 56.1 g/mol = 0.173 moles.

Now, we can use the formula to calculate the molarity:

Molarity = number of moles / volume of solution (in liters)

= 0.173 moles / 0.408 L

= 0.424 M

Therefore, The molarity of the solution is 0.424 M.

To know more about molarity visit:

https://brainly.com/question/31545539

#SPJ11

The coefficient in front of S2O32- when the equation is correctly balanced in basic solution is 2.

To balance the equation in basic solution, we need to ensure that the number of atoms on both sides of the equation is equal and that the charge is balanced.

The given equation is:

ClO⁻ + S₂O₃²⁻ → Cl⁻ + SO₄²⁻

To balance the equation, we start by balancing the atoms other than hydrogen (H) and oxygen (O). We see that there are 2 chlorine (Cl) atoms on the left side, so we place a coefficient of 2 in front of Cl- on the right side to balance it. Now the equation becomes:

ClO⁻ + S₂O₃²⁻ → 2Cl⁻ + SO₄²⁻

Next, we balance the oxygen atoms. There are 4 oxygen (O) atoms on the right side, so we need 4 oxygen atoms on the left side as well. We achieve this by adding a coefficient of 2 in front of S2O32-. Now the equation becomes:

ClO⁻ + 2S₂O₃²⁻ → 2Cl⁻ + SO₄²⁻

Finally, we balance the hydrogen (H) atoms. There are no hydrogen atoms on the left side, and only 1 hydrogen atom on the right side. To balance it, we add a coefficient of 2 in front of OH- on the left side. The final balanced equation in basic solution is:

ClO⁻ + 2S₂O₃²⁻ + 2OH⁻ → 2Cl⁻ + SO₄²⁻ + H₂O

Therefore, the coefficient in front of S2O32- is 2 in the balanced equation in basic solution.

Learn more about Balancing equations

brainly.com/question/7181548

#SPJ11

If the sample of magnesium used in a lab was contaminated with another metal that doesn't react with hydrochloric acid, then the results obtained in the experiment would be affected.

This is because the data collected during the experiment would reflect the reaction between hydrochloric acid and the contaminated sample instead of pure magnesium. As a result, the following changes in results might have been observed:

1. The mass of the contaminated sample would be higher than the mass of pure magnesium.

2. The rate of reaction between the contaminated sample and hydrochloric acid would be slower than the reaction between pure magnesium and hydrochloric acid.

3. The volume of hydrogen gas collected from the reaction would be lower than the volume of hydrogen gas collected in the reaction between pure magnesium and hydrochloric acid.

learn more about contaminated here

https://brainly.com/question/465199

#SPJ11

The volume of added acid at the equivalence point for KOH is equal to the volume of the base used to neutralize the acid.

At the equivalence point, the moles of acid and base are equal and can be determined using the balanced chemical equation and stoichiometry. An equivalence point is the point in a chemical reaction when the amount of acid in a solution equals the amount of base in the same solution. In other words, an equivalence point is the point when the number of moles of acid equals the number of moles of base in a reaction. Molar concentration is expressed in moles per liter (mol/L), and molarity (M) is the standard unit of concentration. The amount of solute dissolved in a solvent determines the concentration of a solution.

To calculate the volume of added acid at the equivalence point for KOH, you need to know the molarity of the acid solution and the volume of KOH required to reach the equivalence point. Then you can use stoichiometry to find the volume of added acid required to reach the equivalence point.Here's an example:If you need 0.1 L of 0.1 M KOH to reach the equivalence point with a 0.1 M HCl solution, the volume of added acid required is also 0.1 L. At the equivalence point, the moles of KOH and HCl will be equal, so the volume of added acid required to reach the equivalence point is equal to the volume of KOH used.

To know more about acids visit:-

https://brainly.com/question/29796621

#SPJ11

Answer: The solution to the given equation is x = 4.

The given equation is 3√(5x-4)=3√(7x+8). By squaring on both sides, we get: 3√(5x-4)² = 3√(7x+8)²15x - 12 = 21x + 24 15x - 21x = 24 + 123x = 36x = 12 .

Therefore, the solution to the given equation is x = 12/3 = 4, which can be verified by substituting the value of x in the given equation.

To know more about solution visit:

https://brainly.com/question/1616939

#SPJ11

The complementary DNA strand of the given single-stranded DNA is as follows:5' -  3'The 5' end of the DNA strand has the phosphate group attached to it, whereas the 3' end has a hydroxyl group attached to it.

Therefore, in the given DNA strand, the 3' end is on the right-hand side and the 5' end is on the left-hand side.If the original strand is a template for the leading strand, DNA synthesis will proceed in the 3' to 5' direction. The arrow will point from left to right.If the original strand is a template strand of a gene being transcribed, RNA synthesis will proceed in the 5' to 3' direction. The arrow will point from right to left.

The sequence of the RNA molecule that would be transcribed from the original strand of DNA is:5' -  3'The 5' end of the RNA strand has the phosphate group attached to it, whereas the 3' end has a hydroxyl group attached to it. Therefore, in the given RNA strand, the 3' end is on the right-hand side and the 5' end is on the left-hand side.\

To know more about phosphate group visit :

https://brainly.com/question/911397

#SPJ11

(a) [tex]C_{11}H_{12[/tex]: Degree of unsaturation (IHD) = 5.5

(b) [tex]C_1_3H_1_4[/tex]: Degree of unsaturation (IHD) = 6

(c) [tex]C_6H_9NO_3[/tex]: Degree of unsaturation (IHD) = 0.5

The degree of unsaturation, also known as the index of hydrogen deficiency (IHD), indicates the number of multiple bonds or rings present in a molecule. It can be calculated using the formula:

IHD = (2n + 2 - x)/2

Where n represents the number of carbon atoms and x represents the number of hydrogen atoms in the molecule.

(a)  [tex]C_{11}H_{12[/tex]:

IHD = (2 * 11 + 2 - 12)/2 = 11/2 = 5.5

The degree of unsaturation for  [tex]C_{11}H_{12[/tex]is 5.5.

(b)  [tex]C_1_3H_1_4[/tex]:

IHD = (2 * 13 + 2 - 14)/2 = 12/2 = 6

The degree of unsaturation for  [tex]C_1_3H_1_4[/tex]is 6.

(c)  [tex]C_6H_9NO_3[/tex]:

First, we need to determine the total number of hydrogen atoms in the molecule.

H = 9 + 1 (for each nitrogen) + 3 (for each oxygen) = 9 + 1 + 3 = 13

IHD = (2 * 6 + 2 - 13)/2 = 1/2 = 0.5

The degree of unsaturation for  [tex]C_6H_9NO_3[/tex]is 0.5.

More on degree of unsaturation can be found here: https://brainly.com/question/17513389

#SPJ4

The net equation for the overall reaction of the Voltaic cell is Cr(s) + 2 Cl−(aq) → Cr3+(aq) + Cl2(g).

The overall reaction of the below Voltaic cell is given below: Cr(s) + 2 Cl−(aq) → Cr3+(aq) + Cl2(g)The reduction potential of Cr3+/Cr = −0.74 V The reduction potential of Cl2/Cl− = 1.36 V The cell potential can be calculated by using the formula, Cell potential = E° (cathode) - E° (anode)Where E° = standard reduction potential of the half-cell The cathode of the Voltaic cell is Cl2/Cl−.

The reduction half-reaction is given below.Cl2 + 2 e− → 2 Cl−E° = +1.36 V The anode of the Voltaic cell is Cr3+/Cr. Hence the oxidation half-reaction is given below. Cr → Cr3+ + 3 e−E° = −0.74 V The overall reaction of the Voltaic cell can be obtained by adding the oxidation half-reaction and the reduction half-reaction. Cr + 2 Cl− → Cr3+ + Cl2The cell potential can be calculated by substituting the E° values in the formula.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

According to the given balanced equation, Carbon monoxide reacts with oxygen gas to form CO2 as follows:2CO (g) + O2 (g) → 2CO2 (g) The molecular weight of CO is 28, and the molecular weight of O2 is 32.

To begin with, we need to know how many moles of each reactant we have. The molar masses of CO and O2 are used to determine their number of moles. We have to use the formula: moles = mass/molar mass (1) moles of CO = mass of CO/molar mass of CO(2) moles of O2 = mass of O2/molar mass of O2Molar mass of CO = 12+16 = 28 g/mol Molar mass of O2 = 16*2 = 32 g/mol1) moles of CO = 3.000 g/28 g/mol = 0.1071 mol (2) moles of O2 = 3.000 g/32 g/mol = 0.09375 mol. Now, we will calculate the number of moles of CO2 that can be produced from the given amounts of reactants. We'll use the mole ratio from the balanced chemical equation to do this. According to the balanced chemical equation,2 moles of CO are required for the production of 2 moles of CO2. Therefore, 1 mole of CO reacts to form 1 mole of CO2. Therefore, the number of moles of CO2 that can be produced is equal to the number of moles of CO used in the reaction.

Since both CO and O2 have lesser moles we'll use the value of O2(2) moles of O2 = 0.09375 mol. The number of moles of CO2 formed will be the same as the number of moles of O2, because O2 is the limiting reactant in this case.2 moles of CO2 are formed from 1 mole of O2. Therefore, the number of moles of CO2 produced will be:0.09375 mol O2 × 2 mol CO2/1 mol O2 = 0.1875 mol CO2Therefore, the maximum number of moles of CO2 recovered is 0.1875.

To know more about Carbon monoxide visit:-

https://brainly.com/question/11862648

#SPJ11

a) The initial pH is 2.86, b) 16.8 ml is the volume of NaOH required to reach the equivalence point, c) 4.37 is the pH after 5 ml of NaOH is added, d) 4.74 is the pH at one-half of the equivalence point, e) 8.78 is the the pH at the equivalence point, f) and 12.18 is the pH after 5 ml excess base is added.

The pH gives the idea about the solution being acidic or basic. The equivalence point in chemistry tells about the equal amount of acid and base added in a reaction or a solution.

Given information,
Volume of sample (V₁) = 20 ml
Concentration of HC₂H₃O₂ (M₁) = 0.105 M
Concentration of NaOH (M₂) = 0.125 M

a. The dissociation of HC₂H₃O₂ is given as:

[tex]\rm HC_2H_3O_2 \leftrightarrow C_2H_3O_2^- + H^+[/tex]

If x is the amount dissociated then,
[tex]\rm Ka = \frac{ [C_2H_3CO_2^-][H^+]}{[HC_2H_3O_2]}[/tex]
[tex]\begin{flalign} \rm Ka &= \frac{[C_2H_3CO_26-][H^+]}{[H_2H_3O_2]}\\1.8 \times 10^{-5} &= \frac{x^2}{0.105}\\x = [H^+] &= 1.37 \times 10^{-3} M\\pH = -log[H^+] &= 2.86 \end{flalign}[/tex]1.8 x 10⁻⁵ = x² ÷ 0.105

x = [H⁺] = 1.37 x 10⁻³ M

pH = -log[H⁺]

pH = 2.86

b. The volume of added base required to reach the equivalence point is given as,
M₁V₁ = M₂V₂
(0.105 M x 20 ml) = 0.125 M x V₂
= (0.105 M x 20 ml) ÷ 0.125 M
= 16.8 ml of NaOH

c. The pH at 5.0 mL of added base is calculated as,

Moles of acid:
0.105 M x 20 ml = 2.1 mmol

Moles of base added:
0.125 M x 5 ml = 0.625 mmol

Concentration of excess Acetic acid:
1.475 mmol ÷ 25 ml = 0.059 M

Concentration of formed Sodium acetate:
0.625 mmol ÷ 25 ml = 0.025 M

pH is given as,

pH = pKa + log(base/acid)

     = 4.74 + log(0.025/0.059)

     = 4.37

d. The pH at one-half of the equivalence point is given as,

Concentration of acetic acid = sodium acetate

pH = pKa = 4.74

e. pH at equivalence point is calculated as following:

All of acid is neutralised then, salt formed [sodium acetate]
= (0.105 M x 20 ml) ÷ 36.8 ml

= 0.057 M

Salt hydrolysis is shown as,
[tex]\rm C_2H_3O_2^- + H_2O \leftrightarrow HC_2H_3O_2 + OH^-[/tex]

If x is the amount that has got hydrolysed then,

[tex]\beginalign \rm Kb &= \frac{Kw}{Ka} \\\\&= \frac{[HC_2H_3O_2][OH^-]}{[C_2H_3O_2^-]} \endalign[/tex]

1 x 10⁻¹⁴ ÷ 1.8 x 10⁻⁵ = x² ÷ 0.057

x = [OH⁻] = 5.63 x 10⁻⁶ M

pOH = -log[OH⁻] = 5.25

pH is given as,

pH = 14 - pOH
     = 14 - 5.25
     = 8.78

f. pH after 5 ml excess base is added is calculated as,

[OH⁻] = (0.125 M x 5 ml) ÷ 41.8 ml
         = 0.015 M

pOH = -log[OH⁻] = 1.82

pH is calculated as,

pH = 14 - pOH
     = 14 - 1.82
     = 12.18


Learn more about equivalence point, here:
https://brainly.com/question/31671460

#SPJ4

The sketch of the process is attached. The moles in and out of the system is 100 gmol for CO, O₂ and CO₂ and 50 gmol for H₂O. The heat transfer to or from the system is -529.7 kJ.

Moles in and out for the system

The moles of CO in the system is 100 gmol. The moles of O₂ in the system is 100 gmol. The moles of CO₂ produced is 100 gmol. The moles of H₂O produced is 50 gmol.

Energy balance for the system

The energy balance for the system is given by the following equation:

Q = ΔH

where:

Q = heat transfer to or from the system

ΔH = enthalpy change of the reaction

The enthalpy change of the reaction can be calculated using the following equation:

ΔH = ΣnΔHf(products) - ΣnΔHf(reactants)

where:

ΔHf = standard enthalpy of formation

n = number of moles

The standard enthalpy of formation of CO₂ is -393.5 kJ/mol. The standard enthalpy of formation of H₂O is -285.8 kJ/mol. The standard enthalpy of formation of CO is -110.5 kJ/mol. The standard enthalpy of formation of O₂ is 0 kJ/mol.

Substituting these values into the enthalpy change equation:

ΔH = (1 mol)(-393.5 kJ/mol) + (2 mol)(-285.8 kJ/mol) - (1 mol)(-110.5 kJ/mol)

ΔH = -529.7 kJ

The heat transfer to or from the system is equal to the enthalpy change of the reaction. Therefore, the heat transfer to or from the system is -529.7 kJ.

Data

The data needed to solve this problem includes:

Standard enthalpy of formation of CO₂: -393.5 kJ/mol

Standard enthalpy of formation of H₂O: -285.8 kJ/mol

Standard enthalpy of formation of CO: -110.5 kJ/mol

Standard enthalpy of formation of O₂: 0 kJ/mol

Find out more on enthalpy change here: https://brainly.com/question/28873088

#SPJ4

Three constitutional isomers can be drawn for the molecular formula C4H9Br.

To draw all the constitutional isomers with the molecular formula C4H9Br, we need to consider the different ways in which the atoms can be arranged while maintaining the same number and types of atoms.

Here are the three constitutional isomers of C4H9Br:

1. n-Butyl bromide: CH3CH2CH2CH2Br

  This is the straight-chain isomer, where the bromine (Br) atom is attached to the end carbon (C) atom.

2. Isobutyl bromide: (CH3)2CHCH2Br

  This is an isomer where the bromine (Br) atom is attached to the second carbon (C) atom, forming a branch.

3. Sec-butyl bromide: CH3CHBrCH2CH3

  This is another isomer where the bromine (Br) atom is attached to the second carbon (C) atom, but in a different position compared to isobutyl bromide.

These three isomers have the same molecular formula (C4H9Br) but differ in the connectivity of atoms. Each isomer represents a unique structural arrangement of the atoms in the molecule.

Learn more about constitutional isomers

brainly.com/question/30556576

#SPJ11

Ether is an organic compound that is highly volatile and flammable. Therefore, ether needs to be removed from a mixture through distillation. However, to ensure complete removal of ether, gentle heating is required.

What is ether?Ether is a highly volatile organic compound that is used in a variety of laboratory experiments, pharmaceutical products, and organic synthesis. Ether is used in the laboratory as a solvent for various chemical compounds.Gentle heating for the removal of ether Ether is a volatile organic compound that is highly flammable. Therefore, ether must be removed from a mixture through distillation. Distillation is a method of separating two or more compounds from a mixture based on their boiling points.

During the distillation process, gentle heating is required to ensure the complete removal of ether. The heat causes the ether to vaporize, which can then be separated from the other components of the mixture. Gentle heating is used to prevent the ether from igniting due to its high volatility and flammability. Additionally, if ether is heated too rapidly, it can cause the mixture to boil over, leading to a loss of the sample being distilled.

To know more about flammable visit :

https://brainly.com/question/13357167

#SPJ11

At equilibrium, the pressure is approximately 0.739 atm, which is slightly lower than the initial pressure of 0.74 atm.

In the given equilibrium reaction: CH₃COOH(g) + CH₃COOH(g) ⇔ (CH₃COOH)₂(g)

Assume the initial number of moles of ethanoic acid (CH₃COOH) is n.

Since it is stated that 50% of the ethanoic acid molecules have reacted at equilibrium, it means that half of the initial moles of ethanoic acid have reacted.

The reaction consumes one mole of ethanoic acid to produce one mole of the dimerized product (CH₃COOH)₂. Therefore, at equilibrium, the number of moles of (CH₃COOH)₂ formed is equal to the number of moles of ethanoic acid reacted.

So, the number of moles of (CH₃COOH)₂ formed is 0.5n.

If the initial number of moles of ethanoic acid is 0.020 mol, then at equilibrium, 50% of it will react, leaving 0.010 mol of ethanoic acid unreacted. And since the reaction consumes one mole of ethanoic acid to produce one mole of (CH₃COOH)₂, the number of moles of (CH₃COOH)₂ formed is also 0.010 mol.

Now, the total number of moles present in the system at equilibrium is the sum of the unreacted ethanoic acid and the (CH₃COOH)₂ formed: 0.010 mol + 0.010 mol = 0.020 mol.

Since the volume of the vessel is constant at 1.0 L, we can use the ideal gas law to calculate the pressure:

PV = nRT

P = (nRT) / V

P = (0.020 mol × 0.0821 atm·L/mol·K × 450 K) / 1.0 L

P = 0.7386 atm

Therefore, at equilibrium, the pressure is approximately 0.739 atm, which is slightly lower than the initial pressure of 0.74 atm.

Find out more on ethanoic acid here: https://brainly.com/question/27918265

#SPJ4

[H₃O⁺], [OH⁻], and pH of 0.22 HCl are 0.22M, 4.55 × 10⁻¹⁴ M, and  0.66 respectively, [H₃O⁺], [OH⁻], and pH of  1.8×10⁻² M HNO₃ are 1.8 × 10⁻² M, 5.56 × 10⁻¹³ M, and 1.74 respectively.

1. Since HCl is a strong acid, it dissociates completely in water to form H₃O⁺ and Cl⁻ ions.

[H₃O⁺] = 0.22 M

[OH⁻] = 1.0 × 10⁻¹⁴ / [H₃O⁺] = 1.0 × 10⁻¹⁴ / 0.22 M = 4.55 × 10⁻¹⁴ M

pH = -log(0.22) = 0.66

pOH = -log(4.55 × 10⁻¹⁴) = 13.34

2. Similar to HCl, HNO₃ is a strong acid and fully dissociates in water.

[H₃O⁺] = 1.8 × 10⁻² M

[OH⁻] = 1.0 × 10⁻¹⁴ / [H₃O⁺] = 1.0 × 10⁻¹⁴ / (1.8 × 10⁻ M) = 5.56 × 10⁻¹³ M

pH = -log(1.8 × 10⁻²) = 1.74

pOH = -log(5.56 × 10⁻¹³) = 12.25

3. Both HBr and HNO₃ are strong acids, so they will dissociate completely.

[H₃O⁺] = 6.1 × 10⁻² M (from HBr)

[OH⁻] = 1.0 × 10⁻¹⁴ / [H₃O⁺] = 1.0 × 10⁻¹⁴ / (6.1 × 10⁻² M) = 1.64 × 10⁻¹³ M

pH = -log(6.1 × 10⁻²) = 1.22

pOH = -log(1.64 × 10⁻¹³) = 12.78

4. Mass of HNO3 = 0.755% of 1.01 g/mL (density) = 0.755 g

Molar mass of HNO3 = 1 + 14 + 3 × 16 = 63 g/mol

Moles of HNO3 = 0.755 g / 63 g/mol = 0.012 moles

Volume of solution = 0.755 g / 1.01 g/mL = 0.748 mL = 0.748 cm³ = 0.748 × 10⁻³ L

[H₃O⁺] = moles of HNO₃ / volume of solution = 0.012 moles / 0.748 × 10⁻³ L = 16.04 M

[OH-] = 1.0 × 10⁻¹⁴/[H₃O⁺]  = 1.0 × 10⁻¹⁴ / 16.04 M ≈ 6.23 × 10⁻¹⁶ M

pH = -log(16.04) ≈ -1.20

pOH = -log(6.23 × 10⁻¹⁶) = 15.20

Learn more about pH, here:

https://brainly.com/question/2288405

#SPJ4

The atom of Bromine (Br) has the highest electronegativity. This means option (e) is correct.

Electronegativity is the power of an atom to attract the shared pair of electrons towards it in a covalent bond. The electronegativity of the elements increases from left to right across the period of the periodic table. As we move from left to right across the period of the periodic table, the nuclear charge increases and the atomic radius decreases, resulting in a higher effective nuclear charge acting on the valence electrons, making them more strongly attracted to the nucleus.

The electronegativity of the elements decreases as we move down the group of the periodic table. This is due to the fact that, as we move down the group, the number of shells in the element increases, shielding the valence electrons from the nucleus' attractive force, resulting in a weaker effective nuclear charge acting on the valence electrons.

To know more about electronegativity visit:

https://brainly.com/question/29597673

#SPJ11

In the given chemical reaction, 7.00 g of sulfur reacts with 7.00 g of oxygen to produce 14.00 g of sulfur dioxide ([tex]SO_2[/tex]). Approx 5.00 g of oxygen would be required to convert 5.00 g of sulfur into sulfur trioxide [tex](SO_3)[/tex]

To determine the mass of oxygen required to convert 5.00 g of sulfur into sulfur trioxide ([tex]SO_3[/tex]), we can use the concept of the law of conservation of mass. According to this law, the total mass of reactants must be equal to the total mass of products in a chemical reaction.

In the given reaction, the ratio of sulfur to oxygen in sulfur dioxide ([tex]SO_2[/tex]) is 1:1. Therefore, the 7.00 g of sulfur reacts with 7.00 g of oxygen to produce 14.00 g of sulfur dioxide. This means that for every gram of sulfur, one gram of oxygen is required.

Now, we need to find the mass of oxygen needed for 5.00 g of sulfur to form sulfur trioxide ([tex]SO_3[/tex]). Since the ratio of sulfur to oxygen in sulfur trioxide is 1:1.5, we can set up a proportion:

(7.00 g of sulfur) / (7.00 g of oxygen) = (5.00 g of sulfur) / x

Cross-multiplying and solving for x, we find that x = 5.00 g of oxygen.

Therefore, 5.00 g of oxygen would be required to convert 5.00 g of sulfur into sulfur trioxide ([tex]SO_3[/tex]).

Learn more about sulfur dioxide here:

https://brainly.com/question/20635180

#SPJ11

The z-test is used to calculate the test statistics of a data set that follows a normal distribution.  we can conclude that there is strong evidence to suggest that the population proportion is less than 0.62.

was obtained when testing the claim that p < 0.62, which suggests that the p-value is less than 0.05 and hence the null hypothesis is rejected at the 5% significance level. The formula for calculating the Z-score is: Z = (x - μ) / (σ / √n)Where x is the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size. The calculated Z-score is then compared with a critical value of the standard normal distribution to test the hypothesis.

In the given case, we can see that the Z-score is negative, which implies that the sample mean is less than the population mean. The negative Z-score also suggests that the sample is on the left-hand side of the population mean. Hence, we can reject the null hypothesis and accept the alternative hypothesis that p < 0.62 at the 5% significance level.

Therefore, we can conclude that there is strong evidence to suggest that the population proportion is less than 0.62.

To know more about hypothesis  visit

https://brainly.com/question/32562440

#SPJ11

The total pressure in the container is approximately 4.02 atm (option b).

To find the total pressure in the container, we need to use the ideal gas law equation: PV = nRT

Given the amounts of SO2 and CO2, we can calculate the number of moles of each gas using their respective molar masses: n(SO2) = 5.00 g / (64.06 g/mol) = 0.078 mol, n(CO2) = 5.00 g / (44.01 g/mol) = 0.113 mol

Now, let's calculate the total number of moles of gas in the container: n(total) = n(SO2) + n(CO2) = 0.078 mol + 0.113 mol = 0.191 mol

Given that the temperature is 50.0 °C, we need to convert it to Kelvin: T = 50.0 °C + 273.15 = 323.15 K

We also know the volume of the container is 750.0 mL, which we need to convert to liters: V = 750.0 mL = 0.750 L

Now we can substitute these values into the ideal gas law equation: P * 0.750 L = 0.191 mol * 0.0821 atm·L/mol·K * 323.15 K

Solving for P, we find: P = (0.191 * 0.0821 * 323.15) / 0.750 ≈ 4.02 atm

Therefore, the total pressure in the container is approximately 4.02 atm (option b).

To know more about pressure, refer here:

https://brainly.com/question/28145947#

#SPJ11

The equilibrium conversion at 500 K and 1 bar is α = 1719/10000 = 0.1719. Therefore, the equilibrium conversion at 500 K and 1 bar is approximately 17.2%.

For the given reaction:C3H8(g) → C2H4(g) + CH4(g)The conversion at equilibrium is negligible at 300 K, but it becomes appreciable at temperatures above 500 K. The pressure is 1 bar. The task is to calculate the equilibrium conversion at 500 K using the Van’t Hoff equation. The reaction is endothermic since it requires energy to break the C–C bond, so the forward reaction is favoured at higher temperatures.

The ΔH° for the reaction can be used to determine the equilibrium constant, which is temperature-dependent. The Van’t Hoff equation relates the equilibrium constant to temperature using the following expression:ln K2/K1 = ΔH°/R (1/T1 - 1/T2)Here, K1 is the equilibrium constant at the lower temperature T1, and K2 is the equilibrium constant at the higher temperature T2.

To know more about equilibrium  visit:-

https://brainly.com/question/30694482

#SPJ11

Few examples of pair of solutions that would be acidic if mixed in equal quantities are, 1-  Hydrochloric acid and acetic acid

                        2-  Sulfuric acid and nitric acid

                        3- Vinegar and lemon juice

To determine which pair of solutions would be acidic when mixed in equal quantities, we need to consider the nature of the individual solutions and their pH values. Acidic solutions have pH values below 7. Here are a few examples of pairs of solutions that would likely result in an acidic mixture when mixed in equal quantities:

1. Hydrochloric acid (pH < 7) and acetic acid (pH < 7): Both of these solutions are acidic in nature, and when mixed in equal quantities, the resulting mixture would likely be acidic.

2. Sulfuric acid (pH < 7) and nitric acid (pH < 7): These are strong acids, and when mixed in equal quantities, the resulting solution would also be acidic.

3. Vinegar (dilute acetic acid, pH < 7) and lemon juice (contains citric acid, pH < 7): Both vinegar and lemon juice are acidic solutions, so when combined in equal quantities, the resulting mixture would likely be acidic.

for more questions on acidic
https://brainly.com/question/25148363
#SPJ8