Therefore, the thermal conductivity of argon (CV,m = 12.5 J·K−1·mol−1, σ = 0.36 nm2) at 298 K is 137.7 mW/(m·K).
The thermal conductivity (λ) of a gas can be estimated by the kinetic theory of gases using the equation:λ = 1/3 × Cv, m × vλ = thermal conductivity Cv,m = heat capacity at constant volume v = average speed of the molecules
The equation to calculate the average speed of the molecules: v = √((8 × R × T) / (π × M))
Where, R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas. Here, we have to calculate the thermal conductivity of argon (CV,m = 12.5 J·K−1·mol−1, σ = 0.36 nm2) at 298 K.
So, let's plug in the values. v = √((8 × R × T) / (π × M))√((8 × 8.314 × 298) / (π × 0.04)) = 330.9 m/sλ = 1/3 × Cv,m × vλ = 1/3 × 12.5 × 330.9λ = 137.7 mW/(m·K)
More on thermal conductivity: https://brainly.com/question/14553214
#SPJ11
During gait, at the instant of heel strike, the torque created by the GRF usually pushes the knee into what kind of position? Flexion Abduction Extension Adduction
At the instant of heel strike, the torque created by the GRF usually pushes the knee into a position of flexion.
The knee joint undergoes several biomechanical changes throughout the gait cycle. At the time of heel strike, the GRF or ground reaction force produces a torque that usually pushes the knee joint into a position of flexion. This response results from the rapid forward movement of the body and leg after heel contact. The GRF acting through the foot causes a moment that tends to extend the knee, but the hamstrings contract eccentrically to resist this motion and allow the knee to flex.
The knee joint's stability during gait is influenced by numerous factors, including muscle strength, joint laxity, ligamentous stability, and joint alignment. The knee undergoes flexion and extension movements during normal gait. During the gait cycle, the knee joint flexes when the foot strikes the ground, and it extends when the foot pushes off the ground.
The quadriceps femor is muscle group acts as the primary extensor of the knee joint, while the hamstrings act as flexors. The gastrocnemius and soleus muscles aid in plantar flexion of the ankle and knee joint flexion. The GRF is the force exerted by the ground on the foot, which propels the body forward during walking. The force is greater during the stance phase of gait and is proportional to the body's weight.
To know more about GRF visit:
https://brainly.com/question/31968286
#SPJ11
A condition that lifts a parcel of air to form cumulus clouds is
Answer
a. differential heating.
b. mountain barriers.
c. a cold front.
d. All of the above.
A condition that lifts a parcel of air to form cumulus clouds is differential heating.
Thus, Differential heating of the land and the water. Water changes temperature more slowly because it has a high specific heat, like the ocean. Land, particularly sandy beaches, has a low specific heat, therefore it warms up faster than water with the same amount of heat.
Our beach towels are blown away by this land-and-water combination, but it is also to blame for more extreme weather like monsoons and thunderstorms and heat.
The typical afternoon thunderstorm might be produced by sea breezes. For instance, the Florida peninsula is bordered by the ocean on both sides. Cool air from the Gulf of Mexico blows inland on the western side as a sea breeze. A sea wind from the Atlantic Ocean causes the same thing to occur on the eastern side and differential heating.
Thus, A condition that lifts a parcel of air to form cumulus clouds is differential heating.
Learn more about Heat, refer to the link:
https://brainly.com/question/30603212
#SPJ4
will a negative charge, initially at rest, move toward higher or lower potential? explain why.
A negative charge, initially at rest, will move toward a higher potential. The reason behind it is that the content loaded will have a negative charge on it.
According to the definition, potential energy refers to the energy stored in an object because of its position in a gravitational or electric field. Charges naturally tend to move from areas of high potential energy to areas of low potential energy.
Hence, due to the negative charge, it will naturally be attracted to the positively charged areas and move towards them.
The potential difference (V) between two points in an electric field is defined as the change in potential energy (U) of a charge (q) divided by the charge (q) that moves:
V = ΔU/q
The potential difference between two points is calculated by dividing the difference in potential energy of the charge by the charge's quantity.
As a result, negative charges always move towards higher-potential energy regions.
The answer is that a negative charge, initially at rest, will move toward higher potential due to its negatively charged nature.
To know more about negative charges, visit:
https://brainly.com/question/30960094
#SPJ11
1. Consider an object moving along a line with the given acceleration a(t)=−6t+12, initial velocity v(0)=−9 m/s and initial position s(0)=0. Assume time t is measured in seconds and acceleration have units of m/s ^2. a. Find the velocity v(t) and position s(t) of the object. b. Graph the velocity v(t) and determine when the motion is in the positive direction and when it is in the negative direction. c. Find the displacement over the interval [0,5]. d. Find the distance traveled over the interval [0,5]
The distance traveled over the interval [0,5] is 281 m. For the given acceleration a(t) = -6t + 12, initial velocity v(0) = -9 m/s and initial position s(0) = 0, we have to find the velocity v(t) and position s(t) of the object.
Given data: Initial velocity, v(0) = -9 m/s and initial position, s(0) = 0Acceleration, a(t) = -6t + 12Integrating the acceleration, a(t), we get the velocity of the object:v(t) = ∫a(t) dt = -3t^2 + 12t + CVelocity v(0) = -9 m/s, so-3(0)^2 + 12(0) + C = -9C = -9m/sv(t) = -3t^2 + 12t - 9 m/sIntegrating the velocity, v(t), we get the position of the object:s(t) = ∫v(t) dt = -t^3 + 6t^2 - 9t + DAt t = 0, s(0) = 0, soD = 0s(t) = -t^3 + 6t^2 - 9t mNext, we have to graph the velocity v(t), determine when the motion is in the positive direction and when it is in the negative direction.
Here is the graph of v(t):Graph of v(t)Given the graph, it can be seen that v(t) is positive for 0 ≤ t ≤ 2, and it is negative for 2 ≤ t ≤ 4. The velocity v(t) is zero when t = 0, 2, and 4. Hence, the motion changes direction at t = 2.From s(t) = -t^3 + 6t^2 - 9t, the displacement over the interval [0, 5] is:s(5) - s(0) = -5^3 + 6(5)^2 - 9(5) = 25 m - 225 m + 45 m = -155 mThus, the displacement over the interval [0,5] is -155 m.Finally, the distance traveled over the interval [0, 5] is:|s(5) - s(0)| + |s(2) - s(0)| = |-155| + |s(2) - 0| = 155 + |4(6)^2 - 9(2)|= 155 + |144 - 18| = 281 mThus, the distance traveled over the interval [0,5] is 281 m. v(t) = -3t^2 + 12t - 9 m/s s(t) = -t^3 + 6t^2 - 9t m . Graph of v(t)The velocity v(t) is positive for 0 ≤ t ≤ 2, and it is negative for 2 ≤ t ≤ 4. The velocity v(t) is zero when t = 0, 2, and 4. Hence, the motion changes direction at t = 2.The displacement over the interval [0, 5] is -155 m.The distance traveled over the interval [0,5] is 281 m.
To know more about acceleration visit :-
https://brainly.com/question/2303856
#SPJ11
the system shown starts from rest and each component moves with a constant acceleration if the relative acceleration of block c with respect to collar b is 60 mm/s^2
Finally, we can use the equation of motion of block B to find the tension in the cord passing over the pulley B. Hence, the tension in the cord passing over pulley B is 80 N.
The acceleration of block C relative to collar B is 60 mm/s². If the system shown in the figure below starts from rest and each component moves with a constant acceleration, what is the tension in the cord passing over pulley B?
In the figure given below, the acceleration of the block C with respect to collar B is 60 mm/s². We need to find out the tension in the cord passing over pulley B. For that, let us consider each block individually.
Block A:There are two cords attached to block A, and hence the tension in the cords on either side of the block must be equal and opposite to the net force acting on the block. We know that the acceleration of each block is equal and constant. Since the system starts from rest, the initial velocity of block A is zero. Using the first equation of motion, we can find the final velocity of the block. Then using the second equation of motion, we can find the displacement of the block. Now, we can find the tension in the cords using the equation of motion of block A.
Block B:We know that the relative acceleration of block C with respect to block B is 60 mm/s². The only force acting on block B is the tension in the cord passing over the pulley. Using Newton's second law, we can find the tension in the cord passing over the pulley.
Block C:Using the same method as for block A, we can find the tension in the cord attached to block C. We can use the equation of motion of block C to find the tension.
to know more about tension visit:
https://brainly.com/question/31715338
#SPJ11
What is the angle between A and B, if A = 3.0i+5.0j and B = -3.0 i +7.0j Equation: A.B=AB cos 0
The angle between vectors A and B, with A = 3.0i + 5.0j and B = -3.0i + 7.0j, is approximately 40.12 degrees. This is calculated using the dot product formula and the inverse cosine function.
To find the angle between vectors A and B, we can use the dot product formula:
A · B = |A| |B| cos θ
where A · B is the dot product of vectors A and B, |A| and |B| are the magnitudes of vectors A and B, and θ is the angle between them.
Given A = 3.0i + 5.0j and B = -3.0i + 7.0j, we can calculate the magnitudes of A and B as:
|A| = sqrt((3.0)^2 + (5.0)^2) = sqrt(9 + 25) = sqrt(34)
|B| = sqrt((-3.0)^2 + (7.0)^2) = sqrt(9 + 49) = sqrt(58)
Next, we calculate the dot product A · B:
A · B = (3.0)(-3.0) + (5.0)(7.0) = -9 + 35 = 26
Now we can solve for the angle θ:
26 = sqrt(34) * sqrt(58) * cos θ
cos θ = 26 / (sqrt(34) * sqrt(58))
Using a calculator, we can find cos θ ≈ 0.7773.
Finally, we can find the angle θ by taking the inverse cosine of 0.7773:
[tex]\theta \approx cos^{-1}(0.7773)[/tex]
θ ≈ 40.12 degrees
Therefore, the angle between vectors A and B is approximately 40.12 degrees.
To know more about vectors refer here:
https://brainly.com/question/30900097#
#SPJ11
If the angular velocity of a rotating rigid body is increased then its moment of inertia about that axis
If the angular velocity of a rotating rigid body is increased then its moment of inertia about that axis remains constant. The moment of inertia of a body is not affected by the angular velocity of the body.
Moment of inertia, also known as rotational inertia or angular mass, is a measure of the amount of mass distributed at different distances from an axis of rotation. It is a physical quantity that measures the degree of difficulty experienced by a rotational body in attaining angular acceleration under the influence of torque.
The moment of inertia, represented by I, is given by the product of mass and square of perpendicular distance of the mass from the axis of rotation. It is calculated as, I = mr²Here, m represents the mass of the body and r represents the distance between a point and axis of rotation. Therefore, the main answer to this question is that the moment of inertia of a rotating rigid body remains constant about an axis of rotation, irrespective of the angular velocity.
This is because the moment of inertia is calculated based on the geometry and mass distribution of the body, and does not depend on the rotational speed of the body.
Therefore, if the angular velocity of a rotating rigid body is increased, the moment of inertia of the body remains unchanged.
For more information on angular velocity kindly visit to
https://brainly.com/question/32217742
#SPJ11
The International Space Station, which has a mass of 4.07×105
kg, orbits 243 miles above the Earth's surface, and completes one
orbit every 91.1 minutes. What is the kinetic energy of the
In
The kinetic energy of the International Space Station, with a mass of [tex]4.07\times10^5 kg[/tex], orbiting 243 miles above Earth's surface, is approximately [tex]1.474 \times 10^{14}[/tex] joules.
To calculate the kinetic energy of the International Space Station (ISS), we can use the formula:
Kinetic Energy = (1/2) * mass * velocity^2
First, we need to convert the altitude of the ISS from miles to meters. There are approximately 1.60934 kilometers in a mile, so 243 miles is equivalent to 243 * 1.60934 * 1000 = 391,064.62 meters.
Next, we need to determine the velocity of the ISS. Since the ISS completes one orbit every 91.1 minutes, we can convert this to seconds by multiplying it by 60: 91.1 * 60 = 5,466 seconds.
The velocity of the ISS can be calculated by dividing the distance traveled (circumference of the orbit) by the time taken: velocity = (2 * π * radius) / time = (2 * 3.14159 * 391,064.62) / 5,466 = 71,894.34 meters per second.
Now we can substitute the mass and velocity values into the kinetic energy formula: Kinetic Energy = [tex](1/2) * 4.07 \times10^5 * (71,894.34)^2 = 1.474 \times 10^{14} joules.[/tex]
Therefore, the kinetic energy of the International Space Station is approximately [tex]1.474 \times 10^{14}[/tex] joules.
To know more about kinetic energy refer here:
https://brainly.com/question/12496196#
#SPJ11
He figure shows all the forces acting on a 2. 0 kg solid disk of diameter 4. 0 cm. What is the magnitude of the disk’s angular acceleration
The magnitude of the disk's angular acceleration is calculated to equal to 10.3 rad/s². The formula that is used in the given question is, τ = Iα0.1 Nm.
Given values: Mass, m = 2 kg, Diameter, d = 4 cm, Radius, r = d/2 = 2 cm = 0.02 m, Torque, τ = 0.1 Nm
Friction, f = 0.05 N
I = (1/2)mr²I
= (1/2) (2 kg) (0.02 m)²I
= 4 × 10⁻⁶ kgm²
Calculate the net torque acting on the disk using the torque equation:
τ = Iα0.1 Nm
= (4 × 10⁻⁶ kgm²)
αα = (0.1 Nm)/(4 × 10⁻⁶ kgm²)α
= 25 rad/s²
The angular acceleration of the disk is 25 rad/s².
However, this value is not the magnitude of the disk's angular acceleration because the net torque has a direction (it is clockwise). The direction of the angular acceleration must be opposite to that of the net torque so that the disk rotates counterclockwise.
Therefore, the magnitude of the angular acceleration is:
α = 25 rad/s² × sin 30°
= 10.3 rad/s²
The magnitude of the disk's angular acceleration is 10.3 rad/s².
To know more about angular acceleration, refer
https://brainly.com/question/13014974
#SPJ11
a space traveler whose mass is 115 kg leaves earth. (a) what are his weight and mass on earth? (b) what are his weight and mass in interplanetary space where there are no nearby planetary objects?
The space traveler's mass and weight on the earth are 115 kg and 1127 N respectively. His weight and mass in interplanetary space are 115 kg and 0 N respectively.
Mass and weight are often confused, but mass is the amount of matter in a substance, while weight is the force exerted on a body due to the pull of gravity. A space traveler with a mass of 115 kg will have different weights and masses depending on the planet he is on and the gravitational pull that planet has.
Mass on Earth = 115 kg
Weight on Earth = mass on Earth * acceleration due to gravity (9.8 m/s²) = 115 kg * 9.8 m/s² = 1127 N
Mass is the same in all locations, and as a result, the space traveler's mass in interplanetary space is still 115 kg. The force of gravity is non-existent in interplanetary space. As a result, his weight would be zero if he were to stand on a weighing scale. As a result, there is no weight acting on the space traveler in interplanetary space where there are no nearby planetary objects.
Learn more about Mass and weight here:
https://brainly.com/question/31247796
#SPJ11
As the mass of an object is quadrupled, it's density O A. quadruples. O B. doubles. 25 C. remains the same. O D. halves. Moving to the next question prevents changes to this answer. O
The mass of an object increases as its density O A. quadruples.
The correct option is A. quadruples. When the mass of an object is quadrupled, its density also quadruples. The density of an object is the amount of matter present in it in comparison to its volume. In simpler terms, density can be defined as the weight of an object in comparison to its size. Hence, if the mass of an object is increased without increasing its volume, its density increases proportionally. It is important to note that this relationship is true only when the volume of the object remains constant as the mass changes. The density of an object can be calculated using the formula: Density = mass/volume. Hence, if the mass of an object is quadrupled and the volume remains constant, the density of the object will also quadruple.
We know, from a higher place, that when the volume is steady, the thickness is straightforwardly corresponding to the mass, this really intends that at consistent volume, the thickness will increment as mass increments. In this way, at consistent volume, the mass of a substance increments when the thickness increments.
Know more about mass increases density, here:
https://brainly.com/question/21484551
#SPJ11
If the coefficient of kinetic friction between a 22-kg crate and the floor is 0.30, what horizontal force is required to move the crate at a steady speed across the floor? What horizontal force is req
The horizontal force required to move the crate at a steady speed across the floor is 65.1 N. This calculation is based on the coefficient of kinetic friction and the weight of the crate.
To calculate the horizontal force required to move the crate at a steady speed, we need to consider the force of friction acting on the crate. The force of friction can be determined using the equation:
F_friction = μ * F_normal
Where:
F_friction is the force of friction
μ is the coefficient of kinetic friction
F_normal is the normal force
Given data:
Mass of the crate (m) = 22 kg
Coefficient of kinetic friction (μ) = 0.30
Step 1: Calculate the normal force.
The normal force (F_normal) is equal to the weight of the crate, which can be calculated using the equation:
F_normal = m * g
Where:
g is the acceleration due to gravity (approximately 9.8 m/s²)
F_normal = 22 kg * 9.8 m/s²
Step 2: Calculate the force of friction.
Using the coefficient of kinetic friction and the normal force, we can calculate the force of friction:
F_friction = μ * F_normal
F_friction = 0.30 * (22 kg * 9.8 m/s²)
Step 3: Determine the horizontal force required.
To move the crate at a steady speed across the floor, the applied force must overcome the force of friction. The horizontal force required is equal in magnitude but opposite in direction to the force of friction:
Force required = F_friction
= 0.30 * (22 kg * 9.8 m/s²)
Calculating the expression, we find:
Force required ≈ 65.1 N
The horizontal force required to move the 22-kg crate at a steady speed across the floor, considering a coefficient of kinetic friction of 0.30, is approximately 65.1 N. This calculation is based on the coefficient of kinetic friction and the weight of the crate. The force of friction opposes the motion of the crate, and the applied force must overcome it to maintain a constant speed. The calculation allows for an understanding of the force required to move objects on surfaces with a given coefficient of friction, aiding in the planning and design of systems involving motion and friction.
To know more about friction ,visit:
https://brainly.com/question/24338873
#SPJ11
when calculating changes in the value of a market basket, quantity is held constant. when calculating changes in real gdp, price is held constant.
Real GDP increased by $45.46 between 2015 and 2016. The value of the market basket is a measure of inflation.
It indicates the changes in the cost of goods and services over time. The calculation involves selecting a set of products and services that a typical household may buy, calculating the cost of these items at a given time, and then comparing the cost at another time. In this calculation, the quantity is held constant. For example, if a basket of goods costs $100 in 2015 and $120 in 2016, the inflation rate is 20% (120 - 100) / 100).
Calculating real GDP involves adjusting the nominal GDP to reflect changes in price. Real GDP refers to the total output of goods and services of a country, adjusted for price changes over time. Real GDP is calculated by dividing nominal GDP by the GDP deflator.
The GDP deflator is a measure of price change in the economy and is calculated as the ratio of nominal GDP to real GDP. In this calculation, the price is held constant, and the quantity is adjusted for the change in price. For example, suppose nominal GDP in 2015 was $500 and in 2016 was $550, and the GDP deflator was 1.1. Real GDP in 2015 would be 500/1.1 = $454.54, and real GDP in 2016 would be 550/1.1 = $500.
Therefore, real GDP increased by $45.46 (500 - 454.54) between 2015 and 2016.
Learn more about inflation here:
https://brainly.com/question/29308595
#SPJ11
Does magnetic flux density and magnetic field intensity have the
same direction? This is for an essay.
Magnetic flux density and magnetic field intensity do not necessarily have the same direction.
Magnetic field intensity and magnetic flux density are two fundamental concepts in the study of magnetic fields. The magnetic field intensity is the measure of the magnetic field strength at any point in space, while the magnetic flux density is the amount of magnetic flux per unit area. Both concepts are vector quantities, meaning that they have both magnitude and direction. The direction of the magnetic field intensity and magnetic flux density can vary based on the position in space and the orientation of the magnet or current carrying conductor producing the magnetic field. Therefore, it is possible for them to have different directions. However, in a uniform magnetic field, where the magnetic field intensity and magnetic flux density are constant throughout the field, the two quantities will have the same direction.
The amount of magnetizing force is the magnetic field strength (H). Attractive transition thickness (B) is how much attractive power instigated on the given body because of the charging force H. Porousness is the proportion of the capacity of a material to help the development of an attractive field inside itself.
Know more about Magnetic density and intensity, here:
https://brainly.com/question/31251348
#SPJ11
when you see your image in a plane mirror, your image appears to be
When you see your image in a plane mirror, your image appears to be as if it is behind the plane mirror. The image that appears is an optical illusion as the reflected rays of light do not actually come from behind the mirror, but they reflect off the mirror plane.
This happens because the mirror forms an image by reflecting the light that bounces off an object or a person. A plane mirror reflects a virtual image that is upright and the same size as the original image.The image formed by a plane mirror appears to be a mirror image of the object reflected. If you move away from the mirror, the image will appear to move in the opposite direction. This is because when you move away, the angle of incidence decreases, and the angle of reflection increases, which causes the reflected image to shift towards the left. On the other hand, if you move closer to the mirror, the image will appear to move in the same direction as your movement. This is because the angle of incidence increases, and the angle of reflection decreases, causing the reflected image to shift towards the right.
For more information on reflected rays visit:
brainly.com/question/32279831
#SPJ11
how many different quantum states are possible for an electron whose principal quantum number is n = 3?
The number of possible quantum states increases with increasing values of n, l, and ml.
When the principal quantum number of an electron is n=3, how many different quantum states are possible?
When the principal quantum number of an electron is n=3, the number of possible quantum states is 9.
Quantum state refers to the state of an electron as determined by its quantum numbers, which are the principal quantum number (n), azimuthal quantum number (l), magnetic quantum number (ml), and spin quantum number (ms).
The principal quantum number determines the energy level and size of the electron's orbital, while the azimuthal quantum number defines its shape and orbital angular momentum. The magnetic quantum number determines its orientation in space, and the spin quantum number specifies the direction of its spin.
When the principal quantum number of an electron is n=3, the number of possible quantum states is 9. The quantum state of an electron is determined by its principal quantum number, azimuthal quantum number, magnetic quantum number, and spin quantum number. The principal quantum number determines the energy level and size of the electron's orbital, while the azimuthal quantum number defines its shape and orbital angular momentum. The magnetic quantum number determines its orientation in space, and the spin quantum number specifies the direction of its spin. Therefore, when n=3, there are 9 possible quantum states.
In conclusion, the number of possible quantum states increases with increasing values of n, l, and ml.
To know more about quantum states visit:
brainly.com/question/28462802
#SPJ11
the magnetic field at the center of a 0.800-cm-diameter loop is 2.40 mt .
The magnetic field at the center of a 0.800-cm-diameter loop is 2.40 mT or 0.00240 T.
The formula for calculating the magnetic field produced by a loop is given by: B = μ0I / (2r) Where: B = magnetic field μ0 = permeability of free space I = current 2r = diameter of the loop
Substitute the given values to obtain the magnetic field: B = μ0I / (2r)B = 4π × 10-7 T m/A x I / (2 × 0.008 m)B = 2π × 10-7 T mA-1 x I / 0.008 mB = 0.002 π I mT
The magnetic field produced by the loop is given as 2.40 mT. Therefore:
2.40 mT = 0.002 π I mT ⇒ I = 2.40 × 10-3 / 0.002 π AI = 0.383 A
Therefore, the magnetic field produced by a 0.800-cm-diameter loop with a current of 0.383 A at its center is 2.40 mT or 0.00240 T.
More on magnetic field: https://brainly.com/question/30331791
#SPJ11
ello please show all work
and solutions, formulas etc. please try yo answer asap for huge
thumbs up!
6. Light with a wavelength of 590 nm is directed at a metal surface with a work function of 1.8 eV.to a) What is the Ex of the freed electrons? b) What will be the speed of the electrons? nododam 088
The Ex of the freed electrons is 1.21 eV and the speed of the electrons will be 6.44 × 105 m/s.
Given, The wavelength of the incident light, λ = 590 nm The work function of the metal surface, Φ = 1.8 eV We know that Energy of a photon is given as E = h c/λWhere,h = Planck’s constant, c = speed of light in vacuum Therefore, E = (6.626 × 10-34 J s) (3 × 108 m/s) / (590 × 10-9 m) = 3.36 × 10-19 J The energy of the photon should be greater than or equal to the work function of the metal surface in order to release the electrons. Hence, we can write E ≥ ΦTherefore,3.36 × 10-19 J ≥ 1.8 eV Thus, the Ex of the freed electrons is 1.21 eV.
Now, we can find the velocity of the electron using the formula, where m is the mass of the electron and h is Planck’s constant and λ is the wavelength of the incident light. The de Broglie wavelength of the electron is given byλ = h / p where p is the momentum of the electron Therefore, p = h/λ = (6.626 × 10-34 J s) / (590 × 10-9 m) = 1.124 × 10-24 J s The kinetic energy of the electron is given by K.E = E – Φ = (3.36 × 10-19 J) – (1.8 eV) = 1.56 × 10-19 J The velocity of the electron is given by v = sqrt(2 K.E / m)where m is the mass of the electron Substituting the values, we ge tv = sqrt(2 × 1.56 × 10-19 J / 9.1 × 10-31 kg) = 6.44 × 105 m/s Therefore, the speed of the electrons is 6.44 × 105 m/s.
Know more about freed electrons, here:
https://brainly.com/question/16799548
#SPJ11
how much charge flows between the ground and the cloud in this time?
The amount of charge flowing between the ground and the cloud at that time is 2C.
A lightning bolt is formed when a cloud's base receives so many negative charges that a stream of these charges, known as electrons, travels from the cloud to the positive charges on the ground.
Rate of charge flow = 20000 C/s
Time duration for which the charge flow occurs, t = 100 μs = 10⁻⁴s
We know that the rate of charge flowing per unit time is known as the current flowing through that point.
So, dq/dt = i = 20000 C/s
Therefore, the amount of charge flowing through that point is,
q = it
q = 20000 x 10⁻⁴
q = 2 C
To learn more about charge flow, click:
https://brainly.com/question/1418143
#SPJ4
Your question was incomplete, but most probably your question will be:
Lightning occurs when there is a flow of electric charge (principally electrons) between the ground and a thundercloud. The maximum rate of charge flow in a lightning bolt is about 20,000 C/s this lasts for 100 μs or less. How much charge flows between the ground and the cloud in this time?
6. Given cost=0 € (2): a) Determine sin28 b) Which quadrant does sin20 lie and what is the angle to the nearest tenth of a degree? Q
Since cost = 0 €, the value of sinθ will be 1. Recall that the Pythagorean identity for sine and cosine states that sin²θ + cos²θ = 1. So, sin²θ = 1 - cos²θ. Given cost=0 €,cosθ=0. Substituting cosθ = 0, we get;sin²θ = 1 - cos²θ. sin²θ = 1 - 0² = 1Therefore,sinθ = √1 = 1
This means that sin28 = 1 Since sin20 lies in the first quadrant (0° to 90°), it will have a positive value. To determine sin20, we can use a calculator or reference a trigonometric table. To the nearest tenth of a degree, sin20 is 0.3 and it lies in the first quadrant.
An identity that expresses the Pythagorean theorem in terms of trigonometric functions is known as the Pythagorean trigonometric identity, or simply the Pythagorean identity. It is one of the fundamental relations between the sine and cosine functions, along with the sum-of-angles formulas. The angle can be any real value, and the equation is s i n 2 + c o s 2 = 1. Given both the sine value and the quadrant in which the angle is located, we can use the Pythagorean identity to determine the angle of cosine.
Know more about Pythagorean identity:
https://brainly.com/question/11973047
#SPJ11
do the results of the experiment support the conservation of linear momentum? consider the possible sources
The results of the experiment generally support the conservation of linear momentum. This conservation law states that, in a closed system, the total momentum before a collision or interaction is equal to the total momentum after the collision or interaction.
In the experiment, this principle can be observed by analyzing the data collected from the different trials conducted.
One possible source of error that could affect the validity of the results is the presence of external forces acting on the system. These forces can interfere with the momentum calculations and cause inaccuracies in the final values obtained. Another possible source of error is the measurement of the objects' masses and velocities, which can introduce uncertainties into the calculations and lead to imprecise results.
To minimize these sources of error, several precautions can be taken. For example, the experiment can be conducted in a controlled environment where external forces are minimized or eliminated. The masses and velocities of the objects can also be measured using more accurate instruments, such as digital scales and motion detectors, to improve the precision of the calculations.
Overall, despite the potential sources of error, the results of the experiment generally support the conservation of linear momentum. By analyzing the data collected from the different trials conducted, it is possible to see that the total momentum before the interaction is equal to the total momentum after the interaction, as predicted by the conservation law.
To know more about Momentum visit :
https://brainly.com/question/30677308
#SPJ11
An electric field component of a polarized ray is expressed
as:
Ez=(8 V/m)cos[(2×10^6 m^(-1) )x+ ωt]
(a) Write down the shape of the magnetic field component of this
ray, including the value of �
The electric field component of a polarized ray is expressed as the equation E = E_0 sinθ.
When a ray is polarized, it means that it vibrates in only one direction. In other words, the electric field of the light wave moves in only one direction, perpendicular to the direction the wave is moving.
This electric field component of a polarized ray is given by the equation E = E_0 sinθ, where E is the magnitude of the electric field vector at any point along the path of the wave, E_0 is the maximum value of the electric field vector, and θ is the angle between the direction of polarization and the direction of the electric field.
Thus, the value of θ ranges from 0 to 180 degrees. The electric field vector oscillates back and forth as the wave propagates, with the magnitude of the vector being maximum when the wave is at its peak and zero when the wave is at its trough.
This equation is an important tool in describing the properties of polarized light waves in various optical systems.
Polarized lenses protect your eyes from the sun's UVA and UVB rays while also reducing glare for improved contrast and clarity. Bring the world around you to life with our collection of iconic sunglasses for men and fashionable sunglasses for women with Polarized lenses.
Know more about polarized ray, here:
https://brainly.com/question/32242228
#SPJ11
L. Calculate the frequency of a pendulum on earth that has a length of 5 m. 2. A wave travels with a velocity of 10 m/s and its period is 5 seconds. Determine the frequency and the wavelength of the w
1). The frequency of a pendulum on Earth with a length of 5 m is approximately 0.314 Hz. 2). The wave with a velocity of 10 m/s and a period of 5 seconds has a frequency of 0.2 Hz and a wavelength of 50 m.
1. The frequency of a pendulum on Earth with a length of 5 m, we can use the formula:
Frequency (f) = 1 / Period (T)
The period of a pendulum is the time it takes for one complete oscillation. On Earth, the period of a simple pendulum can be approximated using the formula:
T = 2π√(L / g)
Where L is the length of the pendulum and g is the acceleration due to gravity.
Substituting the given values:
T = 2π√(5 m / 9.8 m/s^2)
Calculating the value:
T ≈ 2π√(0.5102) ≈ 3.185 s
Now we can calculate the frequency:
f = 1 / T ≈ 1 / 3.185 s ≈ 0.314 Hz
2. The frequency and wavelength of a wave with a velocity of 10 m/s and a period of 5 seconds, we can use the formulas:
Frequency (f) = 1 / Period (T)
Wavelength (λ) = Velocity (v) / Frequency (f)
Velocity (v) = 10 m/s
Period (T) = 5 seconds
Using the formula for frequency:
f = 1 / T = 1 / 5 s = 0.2 Hz
Using the formula for wavelength:
λ = v / f = 10 m/s / 0.2 Hz = 50 m
Therefore, the frequency of the wave is 0.2 Hz and the wavelength is 50 m.
To learn more about frequency refer here:
https://brainly.com/question/29739263#
#SPJ11
Given the following position vs time graph. What is the object's average velocity? 3 10 Position in meters Time in seconds -0.20 m/s 0.25 m/s -0.75 m/s -0.50 m/s
Given the following position vs time graph, The average velocity of an object is defined as the displacement of the object over time object's average velocity is 1.4 m/s.
The formula for average velocity is:v = Δx / Δtwhere:v is the average velocity of the object.Δx is the displacement of the object.Δt is the time it took for the object to travel the distance in question.The units of the average velocity are m/s (meters per second) or km/h (kilometers per hour).
The average velocity can be positive or negative, depending on the direction of motion of the object.In the given position vs time graph, we can find the displacement of the object as follows:Displacement (Δx) = final position - initial position = 10 - 3 = 7 meters.
Time interval (Δt) = final time - initial time = 5 - 0 = 5 seconds. Substituting these values in the formula for average velocity:v = Δx / Δt = 7 / 5 = 1.4 m/s. Therefore, the average velocity is 1.4 m/s.
Know more about displacement here:
https://brainly.com/question/29769926
#SPJ11
what is the energy of an orange lamp with a frequency of 5.10 x 10^14 hz
The energy of an orange lamp with a frequency of [tex]5.10 * 10^{14}[/tex] Hz is [tex]3.38 * 10^{-19}[/tex] J (joules).
The energy of a photon is directly proportional to the frequency of light. This can be expressed mathematically as:
E = hν
where: E is the energy of a photon (in joules)h is Planck's constant ([tex]6.626 * 10^{-34}[/tex]J s)ν is the frequency of light (in hertz)Thus, the energy of an orange lamp with a frequency of [tex]5.10 * 10^{14}[/tex] Hz can be calculated as follows:
E = hν = ([tex]6.626 * 10^{-34}[/tex] J s) x ([tex]5.10 * 10^{14}[/tex] Hz)
= [tex]3.38 * 10^{-19}[/tex] J
Therefore, the energy of an orange lamp with a frequency of [tex]5.10 * 10^{14}[/tex] Hz is [tex]3.38 * 10^{-19}[/tex] J.
For more information on energy kindly visit to
https://brainly.com/question/15939529
#SPJ11
A cart with a toy projectile launcher attached to its top travels forward at a constant speed vo. The launcher fires a solid sphere forward at speed much greater than that of the cart-launcher system. The cart's speed after firing the dart is
A cart with a toy projectile launcher attached to its top travels forward at a constant speed vo. The launcher fires a solid sphere forward at speed much greater than that of the cart-launcher system.
The force of the projectile is equal and opposite to the force experienced by the cart. Due to the law of conservation of momentum, the momentum of the system before the launch is equal to the momentum of the system after the launch. According to this law, the net momentum of the system is constant in the absence of external forces.
Before the launch, the momentum of the system (cart and launcher) is given by (m + M)*v o, where m is the mass of the projectile and M is the mass of the cart-launcher system. Since the projectile is fired forward at much greater velocity compared to the initial speed of the system, it will have a significant amount of momentum.
This is because the cart and the projectile have equal but opposite momentum, and therefore the cart's momentum after firing the dart is equal and opposite to its momentum before firing the dart, resulting in no net change in the cart's momentum.
To know more about law of conservation visit
https://brainly.com/question/1851745
#SPJ11
determine the work done by the constant force. the locomotive of a freight train pulls its cars with a constant force of 9 tons a distance of one-quarter mile.
The work done by the constant force of 9 tons for a distance of one-quarter mile is 118.8 kilojoules.
Work is defined as the application of a force over a given distance. In physics, work is calculated as the product of force and distance. The formula used to calculate the work done by a constant force is as follows: Work done = force x distance.
Since the locomotive of a freight train pulls its cars with a constant force of 9 tons a distance of one-quarter mile, we can determine the work done by using the above formula: Force = 9 tons. Distance = 1/4 mile = 402 meters (approx.) Using metric units, the force is converted to newtons and the distance is converted to meters. 1 ton = 1000 kg9 tons = 9000 kg. Force = 9000 x 9.8 = 88200 N. Distance = 402 m.
Work done = Force x Distance= 88200 x 402= 35,436,000 J= 35.4 MJ= 118.8 kilojoules. Therefore, the work done by the constant force of 9 tons for a distance of one-quarter mile is 118.8 kilojoules.
Learn more about work done here:
https://brainly.com/question/31746168
#SPJ11
if the box weighs 1500 n how much work does the force of gravity do on the box
According to the solving work does the force of gravity do on the box the force of gravity will do work of -7500000 J on the box.
moved by the force If an object is lifted upwards against the gravitational force, the work done by the force will be positive.
But if an object falls towards the ground, the force of gravity will do negative work on the object because the displacement is in the direction opposite to the force.
Let us assume that the box is dropped vertically downwards from a height (distance), and then the force of gravity acting on the box will do negative work on the box.
Given,
the weight of the box is 1500 N.
Work is given by the formula,
Work = Force x Distance
The work done by the force of gravity can be calculated as follows:
Work done = Force x Distance moved by the
force = 1500 x 5000
= 7500000 J
So, the force of gravity will do work of -7500000 J on the box.
To know more about gravity visit :
https://brainly.com/question/1479537
#SPJ11
what is true about Young's double-slit experiment?
a) light waves emerging from the 2 slits have the same phase but
are not coherent
b) not the same phase & not coherent
c) same phase & cohere
True about Young's double-slit experiment: The light waves emerging from the two slits have the same phase and are coherent. The correct option is c.
In Young's double-slit experiment, a beam of light is passed through two narrow slits, creating two coherent sources of light. These two sources generate overlapping wavefronts that interfere with each other. The interference pattern observed on a screen placed behind the slits is a result of the constructive and destructive interference of the light waves.
For interference to occur, the light waves from the two slits must have the same phase. If they have different phases, the interference pattern would not be observed. Coherence refers to the property of waves having a constant phase relationship, which is necessary for stable and predictable interference patterns.
Therefore, in Young's double-slit experiment, the light waves emerging from the two slits have the same phase and are coherent, as stated in option c.
To know more about double-slit experiment, refer here:
https://brainly.com/question/28108126#
#SPJ11
Light is gathered from a distant star and one of the spectral
lines is observed at 500 nm when it should be 400 nm. The velocity
of this star is ___km/s.
Light is gathered from a distant star and one of the spectral lines is observed at 500 nm when it should be 400 nm. The velocity of this star is 75 km/s.
The Doppler effect refers to the observed change in frequency or wavelength of a wave in relation to an observer who is moving in relation to the wave source. The spectral line shift to the red when an object is moving away, and the spectral line shift to the blue when an object is moving toward. Therefore, the velocity of a distant star that has its spectral line shifted from 400 nm to 500 nm can be determined through the Doppler shift formula which is:
Δλ/λ = V/C
Where:Δλ = the difference in wavelength of the spectral line observed
λ = the original wavelength of the spectral line observed
V = velocity of the star
C = speed of light
For this case, the change in wavelength is:
Δλ = 500 nm - 400 nm = 100 nmλ = 400 nm
Using the Doppler shift formula, we can determine the velocity of the star:
Δλ/λ = V/C Cross-multiplying, we have:
V = (Δλ/λ) × C
Substituting the given values:
V = (100 nm / 400 nm) × 3 × 10⁸ m/s
V = 7.5 × 10⁷ m/s
Converting to km/s: V = 75 km/s
Therefore, the velocity of this star is 75 km/s.
More on Doppler effect: https://brainly.com/question/28106478
#SPJ11
