The mass or the weight of the substance is given as the product of moles and molar mass. The weight of CO as the same oxygen atom in carbon dioxide is 28 gm.
What is mass?Mass of the substance has been given by the moles and the molar mass of the substance and also by the Avogadro's number (Na).
It is known that the molar mass of carbon dioxide is 44, and 1 mole of it will contain 44 gm or 6.022 × 10²³ molecules.
In a carbon dioxide molecule oxygen has 2 atoms so,
6.022 x 10²³ molecules of CO₂ = 2 × 6.022 x 10²³ atoms of Oxygen
so, 44g of carbon dioxide = 2 × 6.022 × 10²³ atoms of Oxygen
22 gm of carbon dioxide will also have 6.022 × 10²³ atoms of Oxygen
1 mole of carbon monoxide = 28 gm
So, 28 gm will have 6.022 × 10²³ atoms of Oxygen and will weigh 28 gm.
Therefore, the mass of carbon monoxide is 28 gm.
Learn more about mass here:
https://brainly.com/question/11172063
#SPJ1
Explanation:
1 mol of CO2=12+32=44 g
Number of oxygen in 1 molecule of CO2=2
Therefore, 44 g CO2 contains 2 moles of oxygen
22 g CO2 contains =442×22=1 mole oxygen atom
1 mole of CO=12+16=28 g
∴ 28 g CO contains 1 mol oxygen atom.
Atoms and molecules are way too small to be seen even with a microscope so how can we count how many there are?
Atoms and molecules are way too small to be seen even with a microscope so it can be counted by mass.
According to the context, the term actually may or may not encompass ions that meet this requirement. A molecule would be a collection of more than two atoms held together through attractive forces described as chemical bonds.
Atoms are incredibly tiny, with a diameter of around 1 x [tex]10^{-10}[/tex] meters. They can't be seen with a light microscope due to their small size. The composition of atoms can be observed and studied using a variety of ways, even if a light microscope might not be able to see one atom.
Therefore, atoms and molecules are way too small to be seen even with a microscope so it can be counted by mass.
To know more about molecules
https://brainly.com/question/19922822
#SPJ4
A solution of 5. 00 g of lauryl alcohol in 0. 100 kg of benzene freezes at 4. 1°c. what is the approximate molar mass of lauryl alcohol?
The approximate molar mass of lauryl alcohol is 183 g/mol.
As per Raoult's law:
[tex]T_b - T_s =KC m[/tex]
Tb = the freezing point of benzene (5.5oC), Ts = the freezing point of the solution, K = the cryoscopic constant (5.12 K*kg/mol for benzene), and Cm = the molality of the solution.
[tex]m_{l}[/tex]/M[tex]m_{s}[/tex] = [tex]C_{m}[/tex] where ml is the mass of lauryl alcohol and ms is the mass of the solvent.
[tex]T_b - T_s =KC m[/tex]=K[tex]m_{l}[/tex]/M[tex]m_{s}[/tex]
Therefore, M=[tex]\frac{Km_{l} }{(T_b - T_s)m_{s} }[/tex]=[tex]5.12*5/0.1(5.5-4.1)[/tex]=183 g/mol.
Lauryl alcoholAn organic substance called lauryl alcohol is created industrially from coconut or palm kernel oil. It is an alcoholic fat. The use of sodium lauryl sulfate and other sulfate esters of lauryl alcohol as surfactants is extremely common. In shampoos, sodium laureth sulfate, ammonium laureth sulfate, and sodium lauryl sulfate are all utilized. Lauryl alcohol has a floral scent and is flavorless and colorless. In addition to being a flavor-enhancing food additive, lauryl alcohol is also used to create medicines, lubricating lubricants, surfactants, and monolithic polymers. Lauryl alcohol is a kind of emollient used in cosmetics. Lauryl alcohol, a significant scent, and 1-bromododecane, an alkylating agent used to increase the lipophilicity of organic molecules, are both precursors to Lauryl alcohol.
A solution of 5. 00 g of lauryl alcohol in 0. 100 kg of benzene freezes at 4. 1°c. what is the approximate molar mass of lauryl alcohol?
Learn more about lauryl alcohol here:
https://brainly.com/question/14039964
#SPJ4
Which salt gives the most basic 0. 1 m solution in water?
a. nacl
b. nano2
c. nh4cl
d. nh4no2
The salt gives the most basic 0. 1 m solution in water is NaNo₂.
What is the base?Basic solutions are those solutions in which the concentration of OH- ion will always be greater as compared to the concentration of H+ ion in the solution.
If the solution is basic so after the dissociation, the formation of a strong base and a weak acid is a must in the solution.
NaNo₂ gets dissociated in water in the form of NaOH and HNO₂ and NaOH is a strong base whereas HNO₂ is a weak acid due to which the solution becomes acidic.
Therefore, salt gives the most basic 0. 1 m solution in water NaNo₂.
Learn more about the base, here:
https://brainly.com/question/15905763
#SPJ4
All simple metal with acid reactions are ____ displacement reactions.
Answer:
single displacement
Explanation:
the metal replaces the hydrogen of the acid to for a salt and hydrogen gas
What term refers to the addition (insertion) or removal (deletion) of one or more coding sequence letters (nucleic acids)?
Frameshift mutation refers to the addition (insertion) or removal (deletion) of one or more coding sequence letters (nucleic acids).
What is frameshift mutation?The insertion or deletion of nucleotide bases in amounts that are not multiples of three is referred to as a frameshift mutation in a gene. This is significant because a cell reads the genetic code for proteins in groups of three nucleotides. These so-called "triplet codons" each stand for one of the 20 different amino acids that go into making a protein.
The entire gene sequence after the mutation will be misread if a mutation alters this regular reading frame. This may lead to the incorrect amino acids being added to the protein or the development of a codon that prevents the protein from getting longer.
Learn more about frameshift mutation here:
https://brainly.com/question/12732356
#SPJ4
What is the molecular formula of the smallest neutral compound of nitrogen and hydrogen?
N3H is the correct answer.
N3H is the molecular formula of the smallest neutral compound of nitrogen and hydrogen.
What is a molecular formula?an expression that lists the quantity and kind of atoms that make up a substance's molecules.
How can you determine a compound's molecular formula?Subtract the empirical formula for molar mass from the molar mass of the chemical. The outcome ought to be a full number or extremely close to one. Using the entire number discovered in step 2, multiply each subscript in the empirical formula by that number. The molecular formula is the outcome.Empirical and molecular formula: what are they?The simplest whole-number ratio of the various atoms in a compound is represented by an empirical formula. The precise number of various atom types present in a compound's molecule is indicated by the molecular formula.To learn more about molecular formula visit:
https://brainly.com/question/14425592
#SPJ4
Mike dissolves equal amounts of potassium chloride (KCl) and table sugar (C12H22O11) in the same container of water.
After both substances fully dissolve, what atoms or molecules remain in the water?
A. molecules of KCl and individual atoms of C, H, and molecules of KCl and individual atoms of C, H, and O , ,
B. individual atoms of K and Cl and molecules of C12 H22 O11 individual atoms of K and Cl and molecules of C12, H22, O11, , ,
C. molecules of KCl and C6 H12 O6 molecules of KCl and C6, H 12, O6, , ,
D. individual atoms of K, Cl, C, H, and O
Molecules of KCl and C6 H12 O6 molecules of KCl and C6, H 12, O6, will be present on dissolving equal amount of potassium chloride (KCl) and table sugar (C12H22O11) in the same container of water.
Dissolving the sugar within the water makes a homogenous aggregate and once dissolved an answer is made by the combination of a solute (sugar) and solvent. If a solute is a strong or liquid, growing the temperature will increase its solubility. as an example, greater sugar can dissolve in warm water than in cold water. If a solute is a gasoline, increasing the temperature decreases its solubility.
The solvent is the substance which commonly determines the physical state of the solution (stable, liquid or gas). The solute is the substance which is dissolved by means of the solvent. as an example, in an answer of salt and water, water is the solvent and salt is the solute.A supersaturated solution is an answer that contains greater than the maximum quantity of dissolved solute than a saturated solution below the identical conditions.
Learn more about solution here:-https://brainly.com/question/24372553
#SPJ1
500. ml of a solution containing 1. 5 m nh4cl(aq) is mixed with 500. ml of a solution containing 0. 50m of naoh(aq). what is the ph of the final solution? (kb(nh3) = 1. 8 x 10-5)
The pH of the solution is determined by the hydrogen ion concentration. The pH of the solution with 1.5 M NH4Cl and 0.50 M NaOH is 8.77.
What is pH?
The potential of the hydrogen ion in the given solution is called pH which determines the acidity and basicity of the solution.
Given
The molar concentration of 500 mL NH4Cl = 1.5 M
The molar concentration of 500 mL NaOH= 0.50 M
Kb (NH3) = 1.8 × 10 -5
First pOH is calculated as,
pOH = pKB + log [NH4Cl][NaOH]
= - log 1.8 × 10-5 + log [1.5][0.50]
= - log 1.8 × 10-5 + log [3]
= 4.744 + 0.477
= 5.221
Now, pH is calculated from pOH as,
pH + pOH = 14
pH = 14 – pOH
= 14 – 5.221
= 8.77
Thus we found that, 8.77 is the pH of the solution with 1.5 M NH4Cl and 0.50 M NaOH.
learn more about pH:
https://brainly.com/question/12942138
#SPJ4
This formula equation is unbalanced. pb(no3)2(aq) li2so4(aq) right arrow. pbso4(s) lino3(aq) which coefficient should appear in front of lino3 in the balanced equation?
The coefficient 2 should appear in front of [tex]LiNO_{3}[/tex] in the balanced equation
The chemical equation in which number of atoms in reactant side is equal to the number of atom in product side is called balanced chemical equation. The example of balanced equation is given as,
[tex]Pb(NO_{3} )_{2} (aq) + Li_{2} SO_{4} (aq)[/tex] → [tex]2Li(NO_{3} ) (aq) + Pb SO_{4} (aq)[/tex]
In the above equation, 2 is appear in front of [tex]LiNO_{3}[/tex] in the balanced equation which is known as the coefficient.
The symbolic representation of the chemical reaction is called chemical equation.
learn about balanced equation
https://brainly.com/question/7181548
#SPJ4
Answer: 2
Explanation:
If you halve the volume of a constant amount of gas at a constant temperature, what happens to the pressure?
According to Boyle's law, If one halves the volume of a constant amount of gas at a constant temperature, the pressure will be doubled.
What is Boyle's law?Boyle's law is one of the gas laws that states that the pressure of an ideal gas is inversely proportional to its volume at constant temperature.
Boyle's law equation can be represented as follows:
P = KV
This law suggests that as the pressure of a gas increases, the volume decreases.
Therefore, in accordance with Boyle's law, If one halves the volume of a constant amount of gas at a constant temperature, the pressure will increase times 2 or double.
Learn more about Boyle's law at: https://brainly.com/question/1437490
#SPJ1
A piston-cylinder device contains helium gas, during a reversible, isothermal process the entropy of the helium will __________ increase.
A piston-cylinder device contains helium gas, during a reversible, isothermal process the entropy of the helium will sometimes increase.
As entropy of an ideal gas depends on pressure and temperature . Hence , entropy change during isothermal process if pressure changes . Enropy changes whenever there is a transfer of heat . The change in entropy is the heat added divided by the temperature at which the transfer took place .
A piston-cylinder is a moving device that is made tight by the piston rings. It moves inside in a cylinder in the form of liquid and later expands and then contracts.
To learn more about reversible isothermal process
https://brainly.com/question/15429172
#SPJ4
Which valid empercal formula below would have one. Five times as much oxygen as there is gold in the substance
Answer:
Au2O3
Explanation:
See attachment.
Determine the end (final) value of n in a hydrogen atom transition, if the electron starts in and the atom emits a photon of light with a wavelength of 486 nm.
The end (final) value of n in a hydrogen atom transition is 2.
Using the Rydberg formula ;
1/lamda = R ( 1/[tex]n_{f} ^{2}[/tex] - 1/[tex]n_{i} ^{2}[/tex] )
where , lamda = wavelength = 486 nm = 486 ×[tex]10^{-9} m[/tex]
[tex]n_{f}[/tex] in a hydrogen atom transition = final state = ?
[tex]n_{i}[/tex] in a hydrogen atom transition = initial state = 4
R = Rydberg constant = 1.097 ×[tex]10^{7} m^{-1}[/tex]
1/ 486 ×[tex]10^{-9} m[/tex] = 1.097 ×[tex]10^{7} m^{-1}[/tex] ( 1/[tex]n_{f} ^{2}[/tex] - 1/[tex]4^{2}[/tex] )
[tex]n_{f}[/tex] = 2
Missing parts :
Determine the end (final) value of n in a hydrogen atom transition, if the electron starts in n=4 and the atom emits a photon of light with a wavelength of 486 nm.
To learn more about hydrogen atom transition
https://brainly.com/question/24016401
#SPJ4
The activation of the serine/threonine protein kinase akt requires phosphoinositide 3-kinase (pi 3-kinase) to:______.
The activation of the serine/threonine protein kinase akt requires phosphoinositide 3-kinase (pi 3-kinase) to create phosphorylated lipids that serve as docking sites that localize Akt to the plasma membrane.
Ak strain changing is the meaning of the word Akt. The term "Akt" first appeared in 1928, when J. Furth conducted research on mice that spontaneously generated thymic lymphomas.
An essential enzyme in the signaling pathway that controls how cells react to insulin as well as other growth stimuli is called phosphoinositide 3-kinase (PI3K). To create phosphatidyl-inositol-3,4,5-trisphosphate (PIP3) at the plasma membrane, one such enzyme phosphorylates phosphatidylinositol-4,5-bisphosphate in the third carbon in the molecule.
Therefore, The activation of the serine/threonine protein kinase akt requires phosphoinositide 3-kinase (pi 3-kinase) to create phosphorylated lipids that serve as docking sites that localize Akt to the plasma membrane.
To know more about protein kinase akt
https://brainly.com/question/17092864
#SPJ4
LOTS OF POINTS!!!! Pls look at pic What is the energy (in J) of a photon of
light with a frequency of
5.0 * 10^15
Hz?
Answer:
A.) 3.3 x 10⁻¹⁸ J
Explanation:
You can calculate the energy using the following equation:
E = hf
In this equation,
-----> E = energy (J)
-----> h = Planck's Constant (6.626 x 10⁻³⁴ J*s)
-----> f = frequency (Hz)
Therefore, you can plug the given values into the equation and solve for "E".
E = hf <----- Equation
E = (6.626 x 10⁻³⁴ J*s)(5.0 x 10¹⁵ Hz) <----- Insert values
E = 3.3 x 10⁻¹⁸ J <----- Multiply
________ is the major intermolecular attraction responsible for the relatively high boiling points of alcohols.
Answer:
Hydrogen bonding is the major intermolecular attraction responsible for the relatively high boiling points of alcohols.
A 200. 0-ng sample of sodium-24 was stored in a lead-lined cabinet for 45 hours. The half-life of sodium-24 is 15 hours. How much sodium-24 remains?
Answer:
25 gm would be left
Explanation:
45 hours is 3 half lives
200 gm * 1/2 * 1/2 * 1/2 = 25 gm
According to the concept of half life , as 45 hours are equal to three half- lives after 3 half-lives 25 g of sodium-24 remains.
What is half-life?Half -life of a substance is defined as the time which is required for half of the quantity of a radioactive substance to get decayed.It is a term which is used in nuclear chemistry for describing how quickly unstable atoms undergo radioactive decay into other nuclear species by emitting particles or the time which is required for number of disintegrations per second of radioactive material to decrease by one half of its initial value.
In the given problem time is=45 hours and as 1 half life=15 hours , for 45 hours=45/15=3 half lives .
Amount of sodium-24 after 3 half lives= 200×1/2×1/2×1/2=25 grams.
Therefore, after 45 hours 25 g of sodium-24 remains.
Learn more about half-life ,here:
https://brainly.com/question/16387602
#SPJ2
Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteinsconcentration mechanisms do not include?
Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteins concentration mechanisms do not include Boiling Stones.
What is Amino Acids ?Amino acids organic compounds. Amino acids are building block of life these are the molecules which combine to form proteins. Amino acids contain the amino functional group that is -NH₂ and carboxyl functional group that is -COOH.
Example: Glycine, Alanine etc.
Thus from the above conclusion we can say that Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form proteins concentration mechanisms do not include Boiling Stones.
Learn more about the Amino Acids here: https://brainly.com/question/2526971
#SPJ4
What volume (to the nearest 0. 1 ml) of 4. 70-m naoh must be added to 0. 700 l of 0. 250-m hno2 to prepare a ph = 3. 20 buffer?
log1.429V=3.20 volume (to the nearest 0. 1 ml) of 4. 70-m NaOH must be added to 0. 700 l of 0. 250-m HNO2 to prepare a ph = 3. 20 buffer
Solution ;pH= pKa +log {[ NaOH ] / [ HNO2 ]}
3.20=3.80+log{(V×4.70)/ ( 0.700×0.250)}
3.20=log1.429V
Volume will be 3.20=log1.429V
To know more about preparation of Buffer preparation an calculation please click here : https://brainly.com/question/22390063
#SPJ4
What is the molar solubility of CAF2in pure water at 25°c?
Answer:
1.7x10g per 100cc
Explanation:
The solubility product of Caf, at 25 °C is about X x 10-11 mol/L.
What type of microscope would you use to visualize a sample labeled with an antibody conjugated to a fluorescent tag? confocal, compound, dissection, electron?
The confocal microscope would you use to visualize a sample labeled with an antibody conjugated to a fluorescent tag.
Confocal microscopy, also known as laser light microscopy microscopy as well as confocal laser scanning microscopy, would be an optical imaging technique that employs a spatial aperture to block out-of-focus light during the image-formation process to increase the optical resolution as well as the contrast of a micrograph.
Confocal microscopy's fundamental tenet is that the lighting and detection lenses are concentrated at the same light scattering point, which would be traversed over the sample to create the entire image on the detector.
Therefore, The confocal microscope would you use to visualize a sample labeled with an antibody conjugated to a fluorescent tag.
Hence, option (a) will be correct answer.
To know more about fluorescent
https://brainly.com/question/22985302
#SPJ4
Consider the following balanced equation: 4ZnS + 6O2 Image 4ZnO + 4SO2
Determine the number of moles of zinc oxide produced when 2.5 mol of zinc sulfide is combined with excess O2.
???
Answer:
2.5 moles ZnO
Explanation:
To find the amount of moles, you need to use a mole-to-mole ratio between ZnS and ZnO. The mole-to-mole is made up of the coefficients in the balanced equation.
4 ZnS + 6 O₂ -----> 4 ZnO + 4 SO₂
2.5 moles ZnS 4 moles ZnO
----------------------- x ----------------------- = 2.5 moles ZnO
4 moles ZnS
**While the chemical equation is technically balanced, it does not exist in the smallest mole ratio as possible. Each coefficient can be divided by 2.**
2 ZnS + 3 O₂ -----> 2 ZnO + 2 SO₂
The conversion of the fatty acid palmitate (c16) to carbon dioxide via β-oxidation, the citric acid cycle and oxidative phosphorylation yield approximately ____ atp equivalents
The conversion of the fatty acid palmitate (C-16) to carbon dioxide via β-oxidation, the citric acid cycle and oxidative phosphorylation yield approximately 106 atp equivalents.
The most prevalent kind of fatty acid with sixteen carbon atoms without carbon-carbon double bonds would be palmitic acid. There must be a maximum of seven cycles of beta-oxidation in order to totally degrade the fatty acid. 8 acetyl-CoA molecules, 7 NADH molecules, with 7 FADH2 molecules are produced as a result of this.
The primary enzyme, CAT-1, catalyzes the production of acylcarnitine carnitine, which provides the rate-limiting step in beta-oxidation.
Therefore, the conversion of the fatty acid palmitate (C-16) to carbon dioxide via β-oxidation, the citric acid cycle and oxidative phosphorylation yield approximately 106 atp equivalents.
To know more about fatty acid
https://brainly.com/question/13528495
#SPJ4
As a whole, plants tend to release more oxygen than carbon dioxide into the environment, but the ratios of gases differ at various times of the day. plants tend to take in more carbon dioxide during the day and release more oxygen. at night, they tend to take in more oxygen and excrete more carbon dioxide. how does the model support this phenomenon?
During the day, due to the existence of sunlight, the procedure of photosynthesis elevations over that of respiration. Photosynthesis uses carbon dioxide to produce carbohydrates removing oxygen as a byproduct. During the night, because there is no sunlight, the rate of photosynthesis decreases. This, therefore, drives the rate of respiration to surpass the speed of photosynthesis. In respiration, oxygen is consumed and carbon dioxide is dismissed.
What is photosynthesis?Photosynthesis is the process by which manufacturers use sunlight, water, and carbon dioxide to produce oxygen and energy in the form of sugar.The primary position of photosynthesis is to transform solar energy into chemical energy and then reserve that chemical energy for prospective use. For the most part, the planet's living designs are powered by this process.An illustration of photosynthesis is how plants convert sugar and significance from water, air, and sunlight into energy to grow. Description of photosynthesis is the procedure through which plants use water and carbon dioxide to assemble their food, grow and remove excess oxygen into the air.To learn more about photosynthesis, refer to:
https://brainly.com/question/19160081
#SPJ4
Draw the most stable form of the major product of each of the molecules with excess naoch2ch3 in ch3ch2oh , followed by aqueous acidic workup.
The stable form of the major product of naoch2ch3 in ch3ch2oh reaction is given below.
What is aqueous acidic?The pH of an aqueous solution is the measurement of how acidic or basic it is. The pH of an aqueous solution can be defined and calculated by using the attention of the hydronium ion attention in the solution.When disbanded in an aqueous resolution, certain ions were removed from the explanation. An Arrhenius acid is a combination that increases the attention of H+ ions that are present when counted to water. These H+ ions include the hydronium ion (H3O+) when they incorporate with water molecules.To learn more about aqueous acidic, refer to:
https://brainly.com/question/24191344
#SPJ4
Describe how the pH of anti-acid powder can be determined
Describe how solid ammonium chloride can be separated from a mixture of ammonium chloride and anhydrous calcium chloride
please help it's agent
There exist ways in separating mixtures of chloride salts such as that sodium chloride and ammonium chloride. It can be accomplished by crystallization, filtration, or sublimation.
What is pH of Anti-acid powder?
An antacid exists as a substance that neutralizes stomach acidity and stands habituated to relieve heartburn, indigestion, or an upset stomach.
Antacids increase the pH of the stomach contents toward neutrality. An antacid that increases the pH from 1.5 to 3.5 produces a 100-fold decrease in the concentration of gastric acid. Furthermore, the reduction of acidity exists escorted by inhibition of pepsin activity, another essential component of the digestive juice.
There exist ways in separating mixtures of chloride salts such as that sodium chloride and ammonium chloride. It can be accomplished by crystallization, filtration, or sublimation. The easiest approach among the three exists separation by sublimation.
Ammonium chloride sublimes upon heating. The sublimation exists as a decomposition of ammonium chloride forming ammonia and hydrogen chloride.
Sodium chloride on the other hand doesn't sublime and includes a more increased melting point than ammonium chloride. If we want to divide the mixture, we have to heat it to 330-350 degrees Celsius and manage the gas that will be produced.
To learn more about Ammonium Chloride refer to:
https://brainly.com/question/26049853
#SPJ9
Which of the following factors would reduce the yield of a reaction?
A. The reaction produces a large quantity of heat.
B. The products are more stable than the reactants.
C. The reaction may be reversible.
D. The reaction occurs very quickly.
The products being more stable than the reactants is the factor which would reduce the yield of a reaction and is denoted as option B under standard conditions.
What is a Chemical reaction?This is the process in which one or more substances which are referred to as reactants are converted into new substances which we call the products.
A chemical reaction involves atoms exhibiting different bond formation so as to ensure they acquire an octet configuration and promotes proper stability of the products.
When the products are more stable than the reactants it means it is unable to form other products thereby decreasing the yield which is why it was chosen as the most appropriate choice.
Read more about Chemical reaction here https://brainly.com/question/11231920
#SPJ1
What compound do you expect to be removed from the organic layer of the organic layer is extracted with 1 m naoh solution?
Hydrochloric acid (HCl) and brine both compound expect to be removed from the organic layer extracted with 1 m NaOH solution.
What is extraction?Using a solvent, a component of interest is selectively removed from a mixture during extraction. The process has been utilized to form the phase separation with the solvent in one phase, and the solute to be present in another phase.
The extraction process can be differentiated based on the phase of the solute and solvent. For example, solid-liquid, liquid-liquid, solid-gas and others.
The extraction with the use of the NaOH forms the solute to lose an electron to the hydroxide of the NaOH and forms the layer of the negative acid. The use of Brine and HCl forms to bond with the organic layer and mediate the extraction process.
Learn more about extraction, here:
https://brainly.com/question/16848369
#SPJ4
A body was found lying face up in a residence. The body had 4 incised wounds on the trunk centered in the area around the heart and center of the abdomen. The wounds were all about 1.2 inches wide and varied in depth from 4 inches to 6.5 inches. The temperature in the residence was found to be 70° F by both a thermometer and the thermostat setting. The body temperature was measured to be 70°. No rigor mortis was noted in the body. Livor mortis was found on the back and remained dark when pressed. A wound measuring 3 inches by 0.5 inches was found next to a yellow bruise on the eyebrow bone area. Tissue bridges were found in 2 areas of this wound.
An element with the general electron configuration for its outermost electrons of ns2np1 would be in which element group?
Electron configuration is the electron distribution in the molecular and atomic orbital. An element with configuration ns²np¹ will be in the 3A group. Thus, option B is correct.
What is electronic configuration?The electronic configuration has been the arrangement and distribution of the sub-atomic particle, an electron in the atomic shells.
The electronic configuration given is, ns²np¹. Here, there are three valence electrons in the outermost orbit. As it has been known that the number of the valence electron gives the number of the group.
Therefore, option B. 3A group or 13 group is the correct option.
Learn more about electronic configuration here:
https://brainly.com/question/11182760
#SPJ4
Your question is incomplete, but most probably your full question was, An element with the general electron configuration for its outermost electrons of ns2np1 would be in which group?
a. 2a
b. 3a
c. 4a
d. 5a
e. 8a
