The main ideas associated with Monetarism include the belief that inflation is primarily a monetary phenomenon caused by an excess of money supply, that the government should limit its role in the economy to ensuring a stable money supply and avoiding inflation, and that markets are self-correcting and will naturally adjust to shocks.
The two key ideas of Robert Lucas are rational expectations and the idea that people make decisions based on their subjective beliefs about the future, rather than objective data or statistical analysis. Lucas argued that government policies designed to stabilize the economy, such as monetary and fiscal policy, can have unintended consequences and may even make the economy less stable.
The key idea of Real Business Cycle Theory is that fluctuations in the economy are primarily caused by real, rather than monetary, factors such as changes in productivity or technology. According to this theory, recessions are caused by negative shocks to productivity, such as a decrease in the availability of natural resources or a decline in technological innovation. Proponents of Real Business Cycle Theory argue that government policies designed to stabilize the economy are unnecessary and may even be harmful, since the economy will naturally adjust to changes in real factors over time.
To know more about economy visit :
https://brainly.com/question/18461883
#SPJ11
incarceration in a public facility is the most common formal sentence for juvenile offenders.
True or false
False. Incarceration in a public facility is not the most common formal sentence for juvenile offenders.
In reality, incarceration in a public facility is not the most common formal sentence for juvenile offenders. The juvenile justice system recognizes that juveniles have different needs and levels of accountability compared to adults. Therefore, it emphasizes rehabilitation, treatment, and community-based alternatives rather than solely relying on incarceration.
The goal of the juvenile justice system is to rehabilitate and reintegrate young offenders into society while holding them accountable for their actions. Research and evidence have shown that incarcerating juveniles in public facilities can have detrimental effects on their development and may increase the likelihood of future criminal behavior.
Instead, the juvenile justice system typically employs a range of alternative sentences and interventions tailored to address the specific needs of juvenile offenders. These alternatives may include probation, counseling, community service, educational programs, and restorative justice practices. These approaches aim to address the underlying issues that contribute to delinquent behavior and promote positive change in the lives of young offenders.
Learn more about incarceration from here:
https://brainly.com/question/32338241
#SPJ11
Which basis of allocation makes the most sense in this 16-34 Support-department cost allocations; single-department cost pools; direct, step-down, and recipro- cal methods. Sportz, Inc., manufactures athletic shoes and athletic clothing for both amateur and professional athletes. The company has two product lines (clothing and shoes), which are produced in separate manufacturing facilities; however, both manufacturing facilities share the same support services for information technology and human resources. The following shows total costs for each manufacturing facility and for each support department. Total Costs by Department (in thousands) Variable Costs Fixed Costs $ 600 $ 2,000 $2,600 Information technology (IT) Human resources (HR) $400 $1,000 $1,400 Clothing $2,500 $8,000 $10,500 Shoes $3,000 $4,500 $7,500 Total costs $6,500 $15,500 $22,000 The total costs of the support departments (IT and HR) are allocated to the production departments (clothing and shoes) using a single rate based on the following: Information technology: Number of IT labor-hours worked by department Number of employees supported by department Human resources: Data on the bases, by department, are given as follows: Department IT Hours Used Number of Employees 5,040 Clothing 220 Shoes 3,960 88 Information technology 92 Human resources 3,000 1. What are the total costs of the production departments (clothing and shoes) after the support depart- ment costs of information technology and human resources have been allocated using (a) the direct method, (b) the step-down method (allocate information technology first), (c) the step-down method (allocate human resources first), and (d) the reciprocal method? 2. Assume that all of the work of the IT department could be outsourced to an independent company for $97.50 per hour. If Sportz no longer operated its own IT department, 30% of the fixed costs of the IT department could be eliminated. Should Sportz outsource its IT services?
The appropriate basis of allocation for support department costs depends on Sportz, Inc.'s goals. Outsourcing IT services should be carefully evaluated for cost savings.
How is this so?Sportz, Inc. needs to allocate support department costs to production departments using an appropriate basis.
The direct method, step-down methods (allocating IT or HR first), and the reciprocal method can be used.
The total costs of the production departments vary depending on the allocation method. Sportz should consider outsourcing its IT services, as it could save costs and eliminate 30% of fixed IT costs. A thorough evaluation is necessary to make an informed decision.
Learn more about allocation at:
https://brainly.com/question/27908956
#SPJ4
On 1 July 2020, PMP Pty Ltd purchased a new printing machine for $200,000. The company expected the machine to be used for ten (10) years or 10,000 machine hours, with an estimated I. residual value of $20,000 at the end of its useful life. Actual usage of the machine for the first three (3) years was noted as follows: Year 1: 500 hours • Year 2: 800 hours • Year 3: 3000 hours Required: a) Calculate the depreciation expense for the second year using each of the methods below: (3 marks) I. Straight-line II. Units of production III. Reducing balance method at the rate of 20% each year Focus b) Calculate the carrying amount of the machine at the end of year 2, assuming the straight-line method was used. (2 marks) ANSWER b): c) Prepare the journal entry to record the sale of the machine, assuming that the straight-line method was used and the machine was sold at the end of year 2 for $150,000. (2 marks) ANSWER C):
aI) Depreciation expense for the second year = $18,000. II) Depreciation expense for the second year = $14,400. III) b) Carrying amount at the end of year 2 = $164,000
How to calculate the Depreciationsa) Let's calculate the depreciation expense for the second year using each of the given methods:
I. Straight-line method:
The straight-line method allocates an equal amount of depreciation expense over the useful life of the asset.
Depreciation expense per year = (Cost - Residual value) / Useful life
Depreciation expense per year = ($200,000 - $20,000) / 10 years
Depreciation expense per year = $18,000
Depreciation expense for the second year = $18,000
II. Units of production method:
The units of production method allocates depreciation based on the actual usage or production of the asset.
Depreciation expense per hour = (Cost - Residual value) / Total estimated hours
Depreciation expense per hour = ($200,000 - $20,000) / 10,000 hours
Depreciation expense per hour = $18
Depreciation expense for the second year = Depreciation expense per hour * Hours of usage in the second year
Depreciation expense for the second year = $18 * 800 hours
Depreciation expense for the second year = $14,400
III. Reducing balance method at the rate of 20% each year:
The reducing balance method applies a constant depreciation rate to the carrying amount of the asset.
Depreciation expense for the second year = Carrying amount at the beginning of the second year * Depreciation rate
Depreciation rate = 20% = 0.2
Carrying amount at the beginning of the second year = Cost - Depreciation expense for the first year
Carrying amount at the beginning of the second year = $200,000 - $18,000 = $182,000
Depreciation expense for the second year = $182,000 * 0.2
Depreciation expense for the second year = $36,400
b) The carrying amount of the machine at the end of year 2, assuming the straight-line method was used:
Carrying amount at the end of year 2 = Cost - Accumulated depreciation
Accumulated depreciation for the second year = Depreciation expense per year * Number of years
Accumulated depreciation for the second year = $18,000 * 2
Accumulated depreciation for the second year = $36,000
Carrying amount at the end of year 2 = $200,000 - $36,000
Carrying amount at the end of year 2 = $164,000
c) Journal entry to record the sale of the machine, assuming straight-line method and sold for $150,000:
Debit: Accumulated depreciation
Debit: Loss on sale of machine
Debit: Cash (proceeds from the sale)
Credit: Machine (cost of the machine)
Journal entry:
Debit: Accumulated depreciation - $36,000
Debit: Loss on sale of machine - $14,000
Debit: Cash - $150,000
Credit: Machine - $200,000
Learn more about Depreciation at https://brainly.com/question/1203926
#SPJ4
ahan Co has sales of $500,000, operating profit of $50,000, interest expense of $10,000, tax expense of $20,000, total equity of $125,000 and total debt of $275,000. On the basis of the debt to :equity ratio, Mahan would be considered to have Too little debt, making it a low profitability investment a O Too little debt, making it a risky company to invest in Too much debt, making it a risky company to invest in Just enough debt d O bo co 8.- 38354 in الدرجة من 100 Sam 9 28% غير مجاب عليه بعد الدرجة من 1.00 254 م ( العودة الامتحان النهائي من خارج الحر... JAWWALI.. ||| سؤال 9 A company had net sales of $240,000 during 2015, As well, total PP&E: $820,000 and accumulated depreciation of $72,000. The :fixed assets turnover ratio equals .a 29.3% .b 23% .. All options are incorrect 30% Question Not yet answered Marted out of 1.00 Flag question Return on capital employed is best calculated by the following formula OaNet income divided by (Total assets less cument abilities) Ob Net income divided by (Total assets plus current liabilities) Net income divided by (average labilities less average equity) Net income divided by faverage liabilities plus average equity) # :Selling equity .a Can reduce expensive labor in production of inventory .b Can produce substantial profits, but failure ..to meet contractual obligations أحل اختياري .C Minimize opportunity for profit but reduces risk exposure .d May reduce potential profits for existing shareholders
Return on capital employed is best calculated by dividing net income by (total assets minus current liabilities).
Return on capital employed (ROCE) is a financial ratio that measures a company's profitability and efficiency in generating profits from the capital invested in its operations. It indicates how effectively a company utilizes its capital to generate returns. The formula for ROCE is net income divided by (total assets minus current liabilities). This ratio provides insights into the company's ability to generate profits relative to the capital employed, excluding short-term obligations.
By calculating ROCE, investors and analysts can assess the company's profitability and efficiency in utilizing its capital resources. It helps evaluate the company's financial performance and compare it with industry peers. In the given options, the correct formula for calculating ROCE is net income divided by (total assets minus current liabilities), as it considers the company's profitability in relation to the capital invested in its operations.
Learn more about liabilities here:
https://brainly.com/question/15006644
#SPJ11
The expected market rate of return is 0.12. According to the capital asset pricing model (CAPM), the expected rate of return on security X with a beta of 1 is equal to Multiple-Choice A.0.12 8. Unable to calculate due to lack of sufficient information C.0.08 D. 0.1
The expected market rate of return is 0.12. According to the capital asset pricing model (CAPM), the expected rate of return on security X with a beta of 1 is equal to Multiple-Choice A.0.12 8.
The Capital Asset Pricing Model (CAPM) is a financial model used to determine the expected rate of return on an investment based on its risk and the overall market conditions. It incorporates the risk-free rate of return, the expected market rate of return, and the beta coefficient of the security.
In this case, the expected market rate of return is given as 0.12. The beta coefficient measures the sensitivity of a security's returns to market movements. A beta of 1 indicates that the security has the same level of risk as the overall market. According to the CAPM formula, the expected rate of return on a security is calculated by adding the risk-free rate of return (usually a government bond yield) to the product of the security's beta and the difference between the expected market rate of return and the risk-free rate of return.
To learn more about CAPM - brainly.com/question/20165283
#SPJ11
the brain drain migration from a developing economy to an advanced economy due to the cross-country wage gap will benefit the citizens of the developing economy but not the advanced economy. evaluate whether the statement is true, false or uncertain and why?
The given statement is false as it is a misconception that the migration of skilled workers from developing economies to advanced economies is only beneficial to the developing economies. This migration can also benefit advanced economies in certain ways.
Brain Drain refers to the migration of highly skilled and talented people from one country to another for better employment opportunities, higher wages, and a better standard of living. The statement claims that the brain drain migration from a developing economy to an advanced economy due to the cross-country wage gap will benefit the citizens of the developing economy but not the advanced economy. However, this statement is false because it fails to recognize the benefits that advanced economies can derive from the migration of highly skilled workers.Firstly, the migration of highly skilled workers can boost the knowledge economy of the advanced economy. Highly skilled migrants bring with them knowledge and expertise that can help in the development of new technologies, products, and services that can benefit the advanced economy. This can lead to increased productivity, innovation, and competitiveness in the advanced economy.Secondly, the migration of highly skilled workers can also help in filling the skill gaps in the advanced economy. This is particularly important in industries where there is a shortage of skilled workers such as healthcare, engineering, and technology. The presence of skilled migrants can help to address this shortage and ensure that the advanced economy remains competitive.Finally, the migration of highly skilled workers can also help to boost the economy of the developing economy. This is because the remittances that highly skilled migrants send back to their home country can help to stimulate economic growth and development. This can benefit the citizens of the developing economy by providing them with better education, healthcare, and other essential services.
In conclusion, the statement that brain drain migration from a developing economy to an advanced economy due to the cross-country wage gap will benefit the citizens of the developing economy but not the advanced economy is false. The migration of highly skilled workers can benefit both developing and advanced economies by boosting the knowledge economy, filling skill gaps, and stimulating economic growth.
To know more about migration visit:
brainly.com/question/26123017
#SPJ11
Suppose your firm sells its product for $25 per unit, has a variable cost of $10 per unit, and its break-even point is 65 units of output. What is the firm's total fixed cost? a $650 b. $975 c. $1,375 d $1,625
To find the firm's total fixed cost, we need to use the break-even point and the information about the selling price and variable cost.
The break-even point is the point at which total revenue equals total cost, resulting in zero profit. At the break-even point, the total cost consists of both fixed costs and variable costs.
Let's calculate the total cost at the break-even point:
Break-even point = 65 units
Selling price per unit = $25
Variable cost per unit = $10
Total cost at the break-even point = Total fixed cost + (Variable cost per unit * Break-even point)
Since the break-even point occurs when there is zero profit, the total cost is equal to the total variable cost:
Total cost at the break-even point = Total variable cost
Total variable cost = Variable cost per unit * Break-even point
Total variable cost = $10 * 65
Total variable cost = $650
Now, to find the total fixed cost, we subtract the total variable cost from the total cost at the break-even point:
Total fixed cost = Total cost at the break-even point - Total variable cost
Total fixed cost = $650 - $650
Total fixed cost = $0
Therefore, the firm's total fixed cost is $0.
To know more about total fixed cost click this link -
brainly.com/question/30826886
#SPJ11
Which of the following statements about ethnic diversity in the workplace is true? Multiple Choice Older generations in the workplace are more diverse than younger generations US workers have ethnically diverse The youngest generation in the workplace has the most ethnic diversity Ethnic diversity in the workplace makes employees less culturally award. Workplace ethnic diversity reduces an organization's ability to solve problems creatively O 11 Which of the following demonstrates informal communication? Multiple Choice O O O O Board members have a discussion about the future course of the organization Two employees have a coffee break conversation regarding the progress of their project An employee tells his manager that a coworker is having a negative influence on the team. A story about an employee's marriage difficulties is passed along from one coworker to another Employees write messages to their team members regarding project-related issues. 12 Which of the following best exemplifies personal communication? Mutiple Choice a team discussion of how to improve work performance att acknowledgement that an order has been received a note to a suppler thanking him for the Christmas card he sent a business proposal written to the general manager of a company a team meeting to discuss plans for the company awards banquet
1) The correct statement about ethnic diversity in the workplace is that US workers have ethnically diverse.
2) The statement that demonstrates informal communication is "Two employees have a coffee break conversation regarding the progress of their project".
3) The statement that best exemplifies personal communication is "A note to a supplier thanking him for the Christmas card he sent".
Explanation:
1) The correct statement about ethnic diversity in the workplace is that US workers have ethnically diverse. The statement "US workers have ethnically diverse" is true. In the United States, there is a great deal of ethnic diversity among the workforce.
2) The statement that demonstrates informal communication is "Two employees have a coffee break conversation regarding the progress of their project". Two employees having a coffee break conversation regarding the progress of their project is an example of informal communication. It is not a formal communication, it is a casual conversation.
3) The statement that best exemplifies personal communication is "A note to a supplier thanking him for the Christmas card he sent". A note to a supplier thanking him for the Christmas card he sent is the best example of personal communication. It is a personal thank you note, not a business-related one.
To know more about workforce , visit
https://brainly.com/question/28843491
#SPJ11
In ES, smaller values of a will produce forecasts which react more quickly to changes in the demand pattern. True False
In ES (exponential smoothing), smaller values of a will produce forecasts that react more quickly to changes in the demand pattern. Smaller values of a lead to more weight given to the most recent observations, and the forecast is more sensitive to changes in the data.
ES is a popular forecasting method that employs the use of weighted averages of past observations. It is a simple but powerful technique for short-term forecasting of time series data. The technique involves the use of a smoothing constant (a), which determines how much weight is given to the most recent observation. A smaller value of a leads to more weight given to the most recent observations, and the forecast is more sensitive to changes in the data. This means that smaller values of a will produce forecasts that react more quickly to changes in the demand pattern, making it easier to adjust the forecast to reflect changing market conditions.
Therefore, the given statement is True. In ES (exponential smoothing), smaller values of a will produce forecasts that react more quickly to changes in the demand pattern. Smaller values of a lead to more weight given to the most recent observations, and the forecast is more sensitive to changes in the data. In ES (exponential smoothing), smaller values of a will produce forecasts that react more quickly to changes in the demand pattern. Smaller values of a lead to more weight given to the most recent observations, and the forecast is more sensitive to changes in the data.
To know more about smaller visit:
https://brainly.com/question/30885891
#SPJ11
Sol-Tex has net income of $1,300,000 and 400,000 shares outstanding. It has preferred dividends of $300,000. What are the earnings per share? $0.25 $2.50 $1.86 O $4.33
Sol-Tex has net income of $1,300,000 and 400,000 shares outstanding. It has preferred dividends of $300,000. To find the earnings per share, we first subtract the preferred dividends from the net income:
Net income after preferred dividends = Net income - Preferred dividendsNet income after preferred dividends = $1,300,000 - $300,000Net income after preferred dividends = $1,000,000Then, we divide the net income after preferred dividends by the number of shares outstanding:Earnings per share = Net income after preferred dividends / Shares outstanding Earnings per share = $1,000,000 / 400,000Earnings per share = $2.50Therefore, the earnings per share for Sol-Tex is $2.50.
To know more about dividends visit:
https://brainly.com/question/30030205
#SPJ11
1. Describe how bribery and corruption can impact a company's
international business relations.
2. List and briefly discuss two benefits and two drawbacks of
regional integration.
Bribery and corruption can have significant negative impacts on a company's international business relations.
Regional integration can offer several benefits, including increased trade and market access, economies of scale, enhanced political cooperation, and improved regional stability.
Bribery and corruption can have severe consequences for a company's international business relations. Engaging in such unethical practices can damage the company's reputation and erode trust among business partners, governments, and stakeholders. It can lead to legal repercussions, as many countries have stringent anti-corruption laws. Bribery and corruption create an unfair business environment by distorting competition and favoring companies that engage in illicit activities. This can harm honest businesses that strive for integrity and fair competition. Ultimately, bribery and corruption hinder the development of strong and sustainable international business relationships based on trust, transparency, and ethical conduct.
Regional integration can bring numerous benefits to countries that participate. One significant advantage is increased trade and market access. By eliminating trade barriers within a region, companies can access larger consumer markets, leading to expanded business opportunities. Regional integration can also generate economies of scale, allowing companies to reduce costs and improve efficiency. Another benefit is enhanced political cooperation, which can promote peace, stability, and stronger diplomatic ties among member countries. Additionally, regional integration can attract foreign investment and stimulate economic growth by creating a more attractive and competitive regional market.
However, regional integration also has drawbacks. Some industries or countries may suffer negative consequences, such as job losses or unequal distribution of benefits. Additionally, participating countries may need to cede some decision-making power to supranational bodies, which can be a challenge to national sovereignty and domestic policies. Moreover, conflicting interests and priorities among member countries can complicate the integration process and hinder effective decision-making.
To learn more about bribery click here: brainly.com/question/31116902
#SPJ11
The monopolist's goal is to maximize its profits. As a result of this behavior, the economic consequence is price is greater than marginal cost. result in a transfer of consumer surplus to the firm. producing output where MR = MC and charging whatever the market demand curve will bear. All answers are correct
The larger the price difference between the marginal cost and the price, the greater the deadweight loss.
A monopolist's goal is to maximize profits. As a result of this behavior, the economic consequence is that price is greater than marginal cost. As the monopolist is the only firm operating in the market, it can charge a higher price than marginal cost to increase its profits. This results in a transfer of consumer surplus to the firm. The monopolist produces output where MR = MC and charges whatever the market demand curve will bear. This enables the monopolist to achieve the highest possible profits. In economic terms, this is known as a deadweight loss. It refers to the reduction in overall economic efficiency that occurs when a monopoly firm charges a price that is greater than marginal cost. The deadweight loss results from the reduction in economic surplus that occurs when consumers are forced to pay more for a good or service than it is actually worth to them. The larger the price difference between the marginal cost and the price, the greater the deadweight loss.
To know more about monopolist's visit:
https://brainly.com/question/32611254
#SPJ11
Two (2) primary methods for conducting international business are:
a. Constraints of foreign ownership and expropriation
b. International direct investment and constraints of foreign ownership.
c. International trade and international direct investment
d. Expropriation and international trade
c. International trade and international direct investment. The two primary methods for conducting international business are international trade and international direct investment.
a. Constraints of foreign ownership and expropriation are factors that can affect international business but are not methods themselves. Foreign ownership constraints refer to limitations imposed by governments on the extent to which foreign entities can own or control local businesses or assets. Expropriation, on the other hand, involves the government seizing or nationalizing foreign-owned assets without compensation.
b. International direct investment is a component of international business, but it is not a method on its own. International direct investment refers to the establishment or acquisition of businesses or assets in foreign countries by companies based in another country. It involves making long-term investments to gain control or significant ownership in foreign ventures.
c. International trade is the exchange of goods and services across international borders. It involves importing and exporting products between countries. International trade allows businesses to access foreign markets and expand their customer base.
Therefore, the correct answer is c. International trade and international direct investment, as these two methods form the foundation of international business activities.
To know more about International Trade visit:
https://brainly.com/question/14926566
#SPJ11
Helmut Humm, manager at a large U.S. firm, has just been assigned to the capital budgeting area to replace a person who left suddenly. One of Humm's first tasks is to calculate the company's weighted average cost of capital (WACC) - and fast! The CEO is scheduled to present to the board in half an hour and needs the WACC-now! Luckily, Humm finds clear notes on the Target capital component weights in the current workpapers. Unfortunately, all he can find for the cost of capital components is some handwritten notes. He can make out the numbers, but not the corresponding capital component. As time runs out, he has to guess. Here is what Humm deciphered: Target weights: We = 30%, Wps = 20%, W, = 15%, we = 70%, where wa, Wps, Ws and we are the weights used for debt, preferred stock, retained earnings, and common equity. . . . Cost of components (in no particular order): 11.0%, 6.0%, 15.0%, and 8.5%. The cost of debt is the after-tax cost. If Humm guesses correctly, the WACC is: TA) 10.1%. B) 10.4%. C) 9.7%. D) 11.0%.
Given Target weights:
We = 30%, Wps = 20%, Ws = 15%, and we = 70%, where
wa, Wps, Ws and we are the weights used for debt, preferred stock, retained earnings, and common equity. And the cost of components are 11.0%, 6.0%, 15.0%, and 8.5%, respectively. The cost of debt is the after-tax cost. We need to find the weighted average cost of capital (WACC) of the company.
Step 1: Calculation of the cost of debt (Rd)Rd = 11.0% = 0.11
Step 2: Calculation of the cost of preferred stock (Rp)Rp = 6.0% = 0.06
Step 3: Calculation of the cost of retained earnings (Rs)Rs = 15.0% = 0.15
Step 4: Calculation of the cost of common equity (Re)Re = ke (we) + kpe (wpe) + kce (wce)ke = Cost of equity = Re = Rs + (D/E) * (Re - Rd) = 15% + (30/70) * (15% - 11%) = 0.1729 = 17.29%
kpe = Cost of preferred stock = Rp = 6%
kce = Cost of common equity = Re - ((Re - Rd) * D/E) = 17.29% - ((17.29% - 11%) * 30/70) = 12.11%
Therefore, Re = ke (we) + kpe (wpe) + kce (wce) = (0.1729 * 0.7) + (0.06 * 0.2) + (0.1211 * 0.15) = 0.14
Step 5: Calculation of the weighted average cost of capital (WACC)
WACC = weRe + wpekp + wcrs + wdRd(0.7 * 0.14) + (0.2 * 0.06) + (0.15 * 0.15) + (0.3 * 11)WACC = 0.0998 or 9.98%
Given the target weights and cost of components for debt, preferred stock, retained earnings, and common equity, the weighted average cost of capital (WACC) needs to be calculated. The cost of debt is given as 11%, the cost of preferred stock is 6%, the cost of retained earnings is 15%, and the cost of common equity needs to be calculated. The cost of equity can be calculated using the formula Re = Rs + (D/E) * (Re - Rd), where Rs is the cost of retained earnings, D/E is the debt-equity ratio, Re is the cost of equity, and Rd is the cost of debt. After substituting the given values, the cost of equity is calculated as 17.29%. The next step is to calculate the weighted average cost of capital (WACC) using the formula WACC = weRe + wpekp + wcrs + wdRd, where we, wpe, wc, and wd are the weights used for debt, preferred stock, retained earnings, and common equity, and Re, kp, Rs, and Rd are the cost of components. After substituting the given values, the WACC is calculated as 9.98%. Therefore, the correct option is C) 9.7%.
Therefore, the weighted average cost of capital (WACC) of the company is 9.98%, which is closest to the option C) 9.7%.
To know more about WACC visit:
brainly.com/question/25075224
#SPJ11
Culver Corporation's adjusted trial balance contained the following accounts at December 31, 2020: Retained Earnings $129,000; Common Shares $705,000; Bonds Payable $104,000; Contributed Surplus $211,000; Preferred Shares $59,000; Goodwill $60,000; and Accumulated Other Comprehensive Income (Loss) ($154,000). Prepare the shareholders' equity section of the statement of financial position. (Enter negative amounts using either a negative sign preceding the number e.g. -45 or parentheses e.g. (45).) Culver Corporation Statement of Financial Position (Partial) Shareholders' Equity Total Shareholders' Equity LA $ +A
The total shareholders' equity of Culver Corporation is $1,020,000.
Total equity = Common shares + Preferred shares + Contributed surplus + Retained earnings + Accumulated other comprehensive income(loss) + Goodwill.
Culver Corporation's shareholders' equity section of the statement of financial position includes the following accounts; Common Shares, Preferred Shares, Bonds Payable, Contributed Surplus, Retained Earnings, Goodwill, and Accumulated Other Comprehensive Income (Loss).
To calculate the total shareholders' equity, the accounts included in the shareholder equity section are added up. The following are the calculation steps;
Total shareholders' equity = Common shares + Preferred shares + Contributed surplus + Retained earnings + Accumulated other comprehensive income(loss) + Goodwill
Therefore;
Total shareholders' equity = $705,000 + $59,000 + $211,000 + $129,000 - $154,000 + $60,000
Total shareholders' equity = $1,020,000Therefore, the total shareholders' equity of Culver Corporation is $1,020,000.
To know more about the shareholders visit:
https://brainly.com/question/22077102
#SPJ11
You hedged your exposure to declining interest rates by buying one December call on Eurodollar deposit futures at the premium quoted below. Call Strike price Call premium in basis points Maturity 975000 29.75 December How much did you pay for the call in dollars if you chose the strike price of 975000? (remember that each basis point is worth $25)
Given that a person hedged their exposure to declining interest rates by buying one December call on Eurodollar deposit futures at the premium quoted below. The call Strike price is 975000. The Call premium is in basis points 29.75. The Maturity date is December.
We need to find out how much did you pay for the call in dollars if you chose the strike price of 975000? (remember that each basis point is worth $25). The solution to the given problem is as follows: It is given that each basis point is worth $25.
Therefore, we can calculate the premium value of the call in dollars by multiplying the basis points by the worth of each basis point. So, the premium of the call can be calculated as follows:
Call premium (in dollars) = Call premium (in basis points) × $25
Now, let us put the given values into the above equation and calculate the premium value of the call: Call premium (in dollars) = 29.75 × $25 = $743.75
Therefore, the person paid $743.75 for the call in dollars if he chose the strike price of 975000. Hence, option (c) is the correct answer. Key Points:
In options trading, a call option is a contract that gives the buyer the right to buy an asset, such as a stock, commodity, or currency, at a specified price (strike price) within a specified period (expiry date).
Eurodollar futures are financial derivatives that track the expected interest rates of U.S. dollar-denominated deposits held in banks outside the United States.
To know more about interest rates visit:
https://brainly.com/question/28272078
#SPJ11
T. The men who played for the late, great Vince Lombardi, coach of the Green Bay Packers, commented that he treated them all the same, "...like dogs. This perception on the part of his players most likely addresses the component of organizational justice your text describes as justice. O informational O interpersonal O interactional O distributive O transformational
The correct option is distributive. The component of organizational justice that most likely addresses the perception of Vince Lombardi's players that he treated them all the same, "...like dogs" is distributive justice.
Organizational justice refers to the perceptions that people have regarding the fairness or unfairness of the distribution of rewards and resources in an organization. It can be divided into three distinct categories: procedural, distributive, and interactional justice.
Distributive justice is concerned with the fairness of the distribution of rewards and resources. It refers to the perception that people have regarding the fairness or unfairness of the allocation of rewards such as pay, benefits, promotions, recognition, and other organizational resources.
The men who played for Vince Lombardi, the late great coach of the Green Bay Packers, commented that he treated them all the same, "...like dogs."
This perception on the part of his players most likely addresses the component of organizational justice, which is distributive justice.
To know more about justice visit:
https://brainly.com/question/32393997
#SPJ11
Project your own business career five to ten years ahead as an employee in one or more large, publicly traded companies. In what role would you be dominantly involved strategy making or strategy execution? Do explain your answer fully
In my business career five to ten years ahead as an employee in one or more large, publicly traded companies, I envision myself being dominantly involved in strategy making rather than strategy execution.
Based on my skill set, experience, and interests, I see myself taking on a strategic leadership role such as a Senior Vice President or Chief Strategy Officer. In this position, my primary responsibility would be to formulate and drive the overall strategic direction of the company. I would analyze market trends, competitive landscape, and industry dynamics to identify growth opportunities and develop innovative strategies to enhance the company's market position and profitability. I would work closely with the executive team and the board of directors to align business objectives with long-term strategic goals and ensure the successful implementation of strategic initiatives. As a strategic leader, I would collaborate with cross-functional teams, including finance, operations, marketing, and technology, to translate strategic plans into actionable steps and monitor their progress. I would also engage in strategic partnerships, mergers and acquisitions, and other strategic alliances to expand the company's reach and capabilities.
Overall, my focus would be on driving the vision, mission, and strategic priorities of the organization, guiding its growth and ensuring its competitiveness in the market.
To learn more about business strategy click here; brainly.com/question/28561700
#SPJ11
Steven Ltd (Lessor) and Shane Ltd (Lessee) enter into a lease
agreement for a vehicle on 30 June 2020.
Details of the lease agreement are as follows:
Lease term
3 years
Annual Rental Payment
Steven Ltd (Lessor) and Shane Ltd (Lessee) enter into a lease agreement for a vehicle on 30 June 2020. Thus, the annual lease rental expense would be recorded as follows: Year 1: $10,000Year 2: $10,000Year 3: $10,000
The details of the lease agreement are given below:
Lease term: 3 years
Annual Rental Payment: $30,000 per annum
The above-mentioned lease is operating lease as it fulfills the criteria mentioned in the lease accounting standard i.e. IFRS 16 - Leases. As the lease term is 3 years and it does not transfer the ownership of the asset to the lessee at the end of the lease term, it is classified as an operating lease.
Under the operating lease, the lease payments are recognized in the income statement over the lease term on a straight-line basis. Therefore, the annual lease rental payment of $30,000 would be recognized as an expense of $10,000 per year over the lease term of 3 years.
To know more about lease visit :
brainly.com/question/14464162
#SPJ11
Q = 6L - 0.1L^2 + 4 K - 0.2 K^2 The wage rate is $30, the cost of capital is $40, and output sells for $50. a) In the short run, capital is fixed at 5 units. How much labor do you recommend? b) In the long run, the firm decides to increase its inputs by 10% as compared to its inputs in part a. What do you conclude about returns to scale?
In the given production function Q = 6L - 0.1L^2 + 4K - 0.2K^2, with a fixed capital of 5 units, we need to determine the optimal amount of labor. In the long run, the firm plans to increase its inputs by 10% compared to the previous scenario. We need to analyze the returns to scale based on this change.
a) In the short run, with capital fixed at 5 units, we need to determine the optimal amount of labor. To maximize output, we can use the marginal product of labor (MPL) and compare it to the wage rate. The MPL is given by the first derivative of the production function with respect to labor (L). In this case, MPL = 6 - 0.2L. To find the optimal labor input, we set MPL equal to the wage rate of $30 and solve for L. By setting MPL = 30, we have 6 - 0.2L = 30, which yields L = 24. Therefore, we recommend employing 24 units of labor in the short run.
b) In the long run, the firm decides to increase its inputs by 10% compared to the previous scenario. This implies that both labor (L) and capital (K) will be increased by 10%. To examine the returns to scale, we can compare the percentage increase in output to the percentage increase in inputs. If the percentage increase in output is greater than the percentage increase in inputs, we have increasing returns to scale. Conversely, if the percentage increase in output is less than the percentage increase in inputs, we have decreasing returns to scale. If the two are equal, we have constant returns to scale. In this case, as both labor and capital increase by 10%, we can calculate the new output and compare it to the previous output. By substituting the new inputs into the production function, we can determine the change in output. Based on this comparison, we can conclude whether there are increasing, decreasing, or constant returns to scale.
To learn more about production function, click here:
brainly.com/question/13755609
#SPJ11
Martol, Inc. has fixed costs of $102,500 and a contribution margin ratio of 25%. How much sales revenue must be earned for a profit of $63,000? Multiple Choice $82.750 $331,000 $662,000 $332.000 Ironwood Inc. has a variable cost ratio of 60% and fixed costs of $90,000. What sales revenue is needed to generate a $120,000 profit? Multiple Choice O $128,572 $225,000 $375,000 O $525.000 Idaho Corp. has fixed costs of $20,000 and a contribution margin ratio of 50%. Currently, sales are $75,000. What is Idaho's margin of safety? Multiple Choice $28,000 $35,000 O $42.000 $70,000
Martol, Inc. has fixed costs of $102,500 and a contribution margin ratio of 25%.
Profit = (Sales Revenue x Contribution Margin Ratio) - Fixed Costs Sales Revenue = (Profit + Fixed Costs) / Contribution Margin Ratio Sales Revenue = ($63,000 + $102,500) / 25%Sales Revenue = $660,000Therefore, the sales revenue that must be earned for a profit of $63,000 is $660,000.2. Ironwood Inc. has a variable cost ratio of 60% and fixed costs of $90,000.
:Profit = (Sales Revenue x Variable Cost Ratio) - Fixed Costs Sales Revenue = (Profit + Fixed Costs) / Variable Cost Ratio Sales Revenue = ($120,000 + $90,000) / 40%Sales Revenue = $525,000the sales revenue that Ironwood Inc. needs to generate a $120,000 profit is $525,000.3. Idaho Corp. has fixed costs of $20,000 and a contribution margin ratio of 50%. Currently, sales are $75,000.
Margin of Safety = Total Sales - Break-Even Sales Break-Even Sales = Fixed Costs / Contribution Margin Ratio Break-Even Sales = $20,000 / 50%Break-Even Sales = $40,000Margin of Safety = $75,000 - $40,000Margin of Safety = $35,000 Idaho Corp.'s margin of safety is $35,000.
To know more about Cost Ratio Sales Revenue visit:-
https://brainly.com/question/24154908
#SPJ11
find the regression equation for mountain valley using the number of bars as your x-value and the profit as your y-value.
The regression equation helps establish a mathematical relationship between the number of bars and the profit, allowing for prediction and analysis of the impact of changes in the number of bars on Mountain Valley's profitability.
What is the purpose of finding the regression equation for Mountain Valley using the number of bars as the x-value and the profit as the y-value?To find the regression equation for Mountain Valley using the number of bars as the x-value and the profit as the y-value, you would need a dataset that includes the corresponding values for both variables.
The regression equation helps to establish a relationship between the independent variable (x) and the dependent variable (y). The equation takes the form of y = mx + b, where m is the slope and b is the y-intercept.
Using statistical software or tools like Excel, you can perform a linear regression analysis on the dataset to determine the values of m and b that best fit the data points.
This analysis calculates the line of best fit that minimizes the differences between the observed y-values and the predicted y-values based on the x-values.
Once you obtain the values of m and b, you can plug them into the regression equation to predict the profit (y) for a given number of bars (x) in Mountain Valley.
The equation will provide a mathematical representation of the relationship between the number of bars and the profit, allowing you to make predictions or analyze the impact of changes in the number of bars on the profitability of Mountain Valley.
Learn more about regression equation
brainly.com/question/30742796
#SPJ11
The regression equation for mountain valley is ŷ = -3204 + 1.662x, where x represents the number of bars and ŷ represents the profit.
Explanation:The regression equation for mountain valley can be found using the number of bars as the independent variable, x, and the profit as the dependent variable, y. From the given information, the equation of the line of best fit is ŷ = -3204 + 1.662x. This equation represents the relationship between the number of bars and the profit for mountain valley.
Learn more about Regression equation for mountain valley here:https://brainly.com/question/32787873
#SPJ12
Suppose you manage a $2 million fund that consists of four stocks with the following investments: Stock Investment Beta A $300,000 1.50 B 400,000 -0.50 C 600,000 1.25 D 700,000 0.75 If the market's required rate of return is 15% and the risk-free rate is 7%, what is the fund's required rate of return? Do not round intermediate calculations. Round your answer to two decimal places.
The necessary return on the money is 13.68%. The portfolio beta is the weighted average of the betas of each of the investments, where the weights are the fraction of the portfolio invested in each security.
The formula is:
Beta Portfolio= (Weight A x Beta A) + (Weight B x Beta B) + (Weight C x Beta C) + (Weight D x Beta D)
Beta Portfolio= (300,000/2,000,000 x 1.50) + (400,000/2,000,000 x (-0.50)) + (600,000/2,000,000 x 1.25) + (700,000/2,000,000 x 0.75)
Beta Portfolio= (0.15 x 1.50) + (-0.02 x 0.50) + (0.30 x 1.25) + (0.35 x 0.75)
Beta Portfolio= 0.225 - 0.01 + 0.375 + 0.2625
Beta Portfolio= 0.8525
Now, we can calculate the required rate of return using the CAPM (Capital Asset Pricing Model) formula. The CAPM formula is:
Required Rate of Return= Risk-Free Rate + Beta (Market Return - Risk-Free Rate)
Required Rate of Return= 7% + 0.8525 (15% - 7%)
Required Rate of Return= 7% + 0.8525 (0.08)
Beta Portfolio= (300,000/2,000,000 x 1.50) + (400,000/2,000,000 x (-0.50)) + (600,000/2,000,000 x 1.25) + (700,000/2,000,000 x 0.75)
Beta Portfolio= (0.15 x 1.50) + (-0.02 x 0.50) + (0.30 x 1.25) + (0.35 x 0.75)
Beta Portfolio= 0.225 - 0.01 + 0.375 + 0.2625
Beta Portfolio= 0.8525
Required Rate of Return= Risk-Free Rate + Beta (Market Return - Risk-Free Rate)
Required Rate of Return= 7% + 0.8525 (15% - 7%)
Required Rate of Return= 7% + 0.8525 (0.08)
Required Rate of Return= 13.68%
Therefore, the fund's required rate of return is 13.68%.
Learn more about capital asset pricing model (CAPM): https://brainly.com/question/32230922
#SPJ11
In technical analysis the larger the number of days used in a
moving average, the less smoothing of prices will occur
True
False
False. In technical analysis, the larger the number of days used in a moving average, the more smoothing of prices will occur.
A moving average is a calculation that helps to smooth out price data by averaging it over a specific period of time. When a larger number of days is used, it takes into account a longer time period, resulting in a smoother line that is less sensitive to short-term price fluctuations. On the other hand, using a smaller number of days in a moving average will result in a line that is more sensitive to short-term price movements. By using a larger number of days in the calculation of the moving average, it takes into account a longer period of price data, resulting in a smoother line that represents the average price over that period.
Learn more about price fluctuations visit:
brainly.com/question/28556503
#SPJ11
QUESTION 1 The following observations were noted from an activity sampling study of a CNC machine: Machine working: 800 Machine idle: 450 a) Determine whether the degree of accuracy of the result on a 95% reliability basis is within 15% b) Determine the limit of error for the activities on a 95% reliability basis. c) Determine the additional number of observations required to obtain a $1% as a limit of error for the activities on a 95% reliabilities basis. d) Calculate the degree of accuracy that will be obtained after the additional observations have been made. Interpret the result
a) To find out if the degree of accuracy of the result on a 95% reliability basis is within 15%, we need to calculate the standard error and the confidence limits:Standard error (SE) = √n (p (1-p)) / n - 1Where n = number of observations, p = proportion of machine working, and 1-p = proportion of machine idle.
SE = √(800+450) ((800/1250) (450/1250)) / (1250-1) = √1.44 / 1249 = 0.0346
Therefore, the 95% confidence limits are:
p ± (z x SE)Where z = 1.96 (from the z-table) and p = 800/1250 = 0.64.Lower limit = 0.64 - (1.96 x 0.0346) = 0.5725 Upper limit = 0.64 + (1.96 x 0.0346) = 0.7075
Since the limits are within 15%, the degree of accuracy of the result on a 95% reliability basis is within 15%
.b) The limit of error for the activities on a 95% reliability basis is the difference between the upper and lower limits:Limit of error = 0.7075 - 0.5725 = 0.135
c) To determine the additional number of observations required to obtain a 1% as a limit of error for the activities on a 95% reliabilities basis, we can use the formula:
n = z² x p (1-p) / d²
Where z = 1.96 (from the z-table), p = proportion of machine working = 800/1250 = 0.64, and d = desired limit of error = 0.01.n = (1.96)² x 0.64 (1-0.64) / 0.01² = 2920.1667
We need 2921 observations (rounded up) to obtain a 1% as a limit of error for the activities on a 95% reliabilities basis.
d) To calculate the degree of accuracy that will be obtained after the additional observations have been made, we can use the same formula as in part (a):
SE = √(800+450+2921) ((800+2921)/(1250+2921)) ((450+2921)/(1250+2921)) / (1250+2921-1) = √1.9244 / 4170 = 0.0151Therefore, the 95% confidence limits are:
p ± (z x SE)Where z = 1.96 (from the z-table) and p = (800+2921) / (1250+2921) = 0.7632.Lower limit = 0.7632 - (1.96 x 0.0151) = 0.7335Upper limit = 0.7632 + (1.96 x 0.0151) = 0.7929
The degree of accuracy after the additional observations have been made is within 6.7%.
Interpretation:
The degree of accuracy of the result on a 95% reliability basis is within 15%. Therefore, we can be 95% confident that between 57.25% and 70.75% of the CNC machine's time is spent working. The limit of error for the activities on a 95% reliability basis is 13.5%. To obtain a 1% limit of error, we need an additional 2921 observations. After the additional observations have been made, the degree of accuracy will be within 6.7%.
To know more about degree of accuracy visit:
https://brainly.com/question/1906830
#SPJ11
We are Bechtel, a private US construction firm. We bid to develop the airport and the surrounding area for Thailand. We are not sure whether the Thai transportation authorities will grant us the business, but we hope they will. If we are awarded the contract, for which we bid $ 1 billion, we shall need to buy Thai materials and labor for 2 years. Assume that the purchases we need to make are in one year. The project will be completed in two years from the present. We expect the Thai bhat will revalue in the next 2 years, but we do not know definitely. We have two choices. One is to hedge and paying for the labor and materials in the one yeas, and the other is to leave an open position. The data we have are the following. The Spot ER, forward ER now and actual spot rate in one year are 24, 30 and 27 bhat per $. The call and put option premia on bhat and dollars for exercise prices of 30 bhat per dollar and 25 bhat per $ are 2% and 1% of the value. The time period of the options is one year. Analyze what the best solution is. Show it mathematically and 2) verbally.
Bechtel would lose 3 billion bhat if they hedged.
The actual spot rate in one year = 27 bhat per $
The forward ER now = 30 bhat per $
The Spot ER = 24 bhat per $
The total purchases to be made = $ 1 billion
Since Bechtel will purchase the materials and labor from Thailand, they will need to convert the dollar into Thai bhat.
In one year, Bechtel will need 27 x $ 1 billion = 27 billion bhat.
If they had chosen to hedge and pay for the labor and materials, they would have to pay 30 x $ 1 billion = 30 billion bhat.
Also, since they expect that the Thai bhat will revalue in the next two years, it would not be wise to hedge. Therefore, leaving an open position is the best solution since they will benefit if the Thai bhat revalues in the next two years.
The best solution for Bechtel is to leave an open position because if they had hedged, they would lose 3 billion bhat. Leaving an open position would enable Bechtel to benefit from the possibility that the Thai bhat might revalue in the next 2 years. Therefore, Bechtel should not hedge.
The optimal solution for the Bechtel, a private US construction firm, is to leave an open position since there is a possibility that the Thai bhat might revalue in the next 2 years.
Know more about the actual spot rate
https://brainly.com/question/31365909
#SPJ11
Ex-Patriot Compensation
How do you design a pay system to attract and retain ex-patriot workers?
Discuss critical issues surrounding compensation for ex-patriots today.
How is compensation effectively used, if at all, to attract, retain and motivate key staff?
What are some common problems around the management of compensation systems for ex-patriots
When designing a pay system to attract and retain ex-patriot workers, one must consider several factors. These factors include the employee's skills, the country's economic conditions, the company's financial resources, and the market rate for similar jobs.
A pay system that provides competitive compensation can help to attract and retain ex-patriots. For instance, an ex-patriot should be paid higher than the local staff to account for relocation and other costs.The critical issues surrounding compensation for ex-patriots include:Currency fluctuations:
When currency rates fluctuate, they can impact the employee's purchasing power. As a result, employers should provide compensation packages that account for the impact of such fluctuations and any possible inflation in the host country.
Taxation: Depending on the country, expatriates may face additional tax liabilities in the host country. Therefore, the pay system must account for the tax liabilities, and the employer must take measures to ensure that they comply with local laws.The use of compensation to attract, retain, and motivate key staff varies from company to company. However, when designing a pay system, it is essential to consider factors such as job satisfaction, career growth, performance, and recognition in addition to compensation.
This approach will help to motivate and retain key staff effectively.Common problems around the management of compensation systems for ex-patriots include issues such as ensuring that expatriates receive similar benefits as local staff, determining fair compensation that considers local and global rates, and providing timely compensation. Another challenge is ensuring that the compensation system complies with the laws and regulations of the host country.
Learn more about compensation here-
https://brainly.com/question/26178761
#SPJ11
1–B.) Show a situation where this farmer is making economic profits. Explain what is likely to
happen in this market as a result of this condition. Assume that this one farmer is one of many
farmers making an economic profit and the high prices that lead to the economic profit has a very
strong influence on potential market participants.
One situation where the farmer is making economic profits is where the price of the product is high in the market due to either increased demand or decreased supply. In this situation, the farmer is making an economic profit because the revenue received from the sale of the product is greater than the costs incurred in producing it.
For instance, if the price of maize increases due to an increased demand for maize products such as animal feed, the farmer producing maize will earn an economic profit.
When one farmer is making an economic profit, other farmers will likely enter the market to share in the profits. This is because potential market participants will see the high returns earned by the farmer and seek to benefit from the same returns. As a result, the increased competition will result in a higher supply of the product, leading to a decrease in the price of the product in the market.
When the price decreases, the farmers will incur normal profits, which are equal to the opportunity cost of production. Normal profits occur when the revenue earned from the sale of the product is equal to the costs incurred in producing it, including the opportunity cost of production. Thus, the high prices that lead to the economic profit will be short-lived as more farmers enter the market, increasing the supply and decreasing the price of the product.
to know more about economic profits visit:
https://brainly.com/question/14501676
#SPJ11
a work breakdown structure is the first step in building a project schedule.
Yes, a work breakdown structure is the first step in building a project schedule. Each task can then be scheduled, and the project manager can track progress against the schedule to ensure that the project is on track.
EXPLANATIONA work breakdown structure (WBS) is a graphical depiction of a project's deliverables, milestones, and work scope. It is a method that allows project managers to decompose a project into smaller, more manageable components and then allocate time, cost, and resource estimates to each element.A WBS is a vital component of project planning because it is the foundation for developing a project schedule.
The WBS allows the project manager to divide the project into smaller, more manageable tasks, which can then be scheduled and assigned to individual team members.The project manager can use the WBS to determine the work required to complete each task, as well as the duration of each task, by dividing the project into smaller, more manageable components.
To know more about project manager visit:
https://brainly.com/question/29023210
#SPJ11
The real value of the marginal product of capital is given by MPK=(AL/K)0.5, where L denotes labor, and A denotes the level of technology. The level of technology is A=4 and the stock of labor is L=49. The depreciation rate of capital is 0,08 and the real value of the user cost of capital is 0,14. a) What is the desired (i.e. optimal) stock of capital? (10000) If the capital stock is equal to the desired capital stock, what is the value of replacement investment? (800) b) A major technological innovation increases A to 6 and leads to an increase in employment to 98. To reach the new desired level of capital, what is the value of net investment? (20000). c) In the period in which technology level increases to 6, employment increases to 98, and firms increase the capital stock to the desired level, what is the value of gross investment? (20800).
a) The optimal stock of capital The given formula is, MPK=(AL/K)0.5Given, A=4, L=49, depreciation rate of capital is 0.08 and the real value of the user cost of capital is 0.14.Substituting the given values in the given formula we get, MPK=(4*49/K)0.5= (196/K)0.5Let the optimal stock of capital be K*.
At optimal stock of capital, the firm equates the marginal product of capital with the user cost of capital (including depreciation).Thus, the optimal stock of capital is given by;MPK = User cost of capital (including depreciation) (196/K*)0.5 = 0.14 + 0.08* K*Where K* is the optimal stock of capital.(196/K*)0.5 = 0.14 + 0.08* K*196/K* = (0.14 + 0.08*K*)2K* = (196/2.56) = 76562.5Optimal Stock of capital = 76562.5 ≈ 10000If the capital stock is equal to the desired capital stock; the value of replacement investment is zero as the stock of capital remains constant.
Replacement investment is defined as an investment made to replace worn-out, damaged or obsolete capital goods.b) To reach the new desired level of capital, the value of net investmentNet investment required to increase the capital stock to the desired level can be calculated as follows;MPK=(AL/K)0.5Given, A=6, L=98, K = 10000, depreciation rate of capital is 0.08 and the real value of the user cost of capital is 0.14.Substituting the given values in the given formula we get, MPK=(6*98/10000)0.5= 0.2219779Let the desired level of capital be Kd. Net Investment = (Kd - K) + Depreciation of Capital.
To know more about optimal visit:
https://brainly.com/question/28587689
#SPJ11