Mole percent composition of the reactor stream is C2H6 = 32.6%, Cl2 = 23.5%, N2 = 4.4%, C2H5Cl = 17.6%, and HCl = 17.6%.Percent conversion of the excessive reactant (N2) is 0%.The percent excess of the excessive reactant (N2) is 0%.
The chemical reaction takes place as shown below;C2H6 + Cl2 → C2H5Cl + HCINow let’s draw a table to know how many moles of each substance is present;First, consider the given feed composition:Moles of C2H6 fed = 50% of the total moles fed = 0.5 × 100 = 0.5 Moles of Cl2 fed = 40% of the total moles fed = 0.4 × 100 = 0.4 Moles of N2 fed = 10% of the total moles fed = 0.1 × 100 = 0.1 Now calculate moles of each substance consumed and produced:Moles of C2H6 consumed = 1 × 0.6 = 0.6 Moles of Cl2 consumed = 1 × 0.4 = 0.4 Moles of C2H5Cl produced = 1 × 0.6 = 0.6 Moles of HCl produced = 1 × 0.6 = 0.6 Calculate the moles of each substance in the reactor stream:Particulars Moles C2H6 Moles Cl2 Moles N2 Moles C2H5Cl Moles HClFeeding 0.5 0.4 0.1 0 0Reacted 0.6 0.4 0 0.6 0.6Generated 0 0 0 0.6 0.6 .
Limiting reactant will be the reactant which has the least mole percentage in the reactor stream. Hence, it is N2.To find out the percentage conversion of N2, we use the following formula; Percentage conversion = [(Moles fed − Moles in the reactor stream) / Moles fed] × 100Moles of N2 fed = 0.1Moles of N2 in the reactor stream = 0.1Percentage conversion of N2 = [(0.1 − 0.1) / 0.1] × 100 = 0%.
To know more about reactant visit:
https://brainly.com/question/14449229
#SPJ11
which of the following statements about corrosion is true? select all that apply. the presence of water and electrolytes can promote corrosion. very few metals undergo oxidation over time. painting or galvanizing can protect metal from corrosion. connecting metal a to a less reactive metal will prevent or slow the corrosion of metal a. steel will not corrode over time.
The following statements about corrosion are true:
1. The presence of water and electrolytes can promote corrosion.
2. Painting or galvanizing can protect metal from corrosion.
These two statements correctly reflect the factors that can contribute to corrosion and the protective measures that can be taken to prevent or reduce it.
However, the other statements are not entirely accurate:
- Very few metals undergo oxidation over time: This statement is incorrect. Many metals can undergo oxidation and corrosion over time, especially when exposed to certain environmental conditions.
- Connecting metal A to a less reactive metal will prevent or slow the corrosion of metal A: This statement is incorrect. Connecting metal A to a less reactive metal (a sacrificial anode) can indeed slow down the corrosion of metal A by acting as a sacrificial element, but it does not prevent corrosion entirely.
- Steel will not corrode over time: This statement is incorrect. Steel is prone to corrosion, especially in the presence of water and oxygen. It can undergo rusting, which is a form of corrosion specific to iron and steel.
Therefore, the correct statements are the first two: the presence of water and electrolytes can promote corrosion, and painting or galvanizing can protect metal from corrosion.
To know more about Oxidation, visit
https://brainly.com/question/13182308
#SPJ11
why does succinyl coa act as a high phosphoryl transfer compound?
Succinyl CoA acts as a high phosphoryl transfer compound due to the high-energy bond present in its phosphate group.
Succinyl CoA is an intermediate molecule involved in the citric acid cycle (also known as the Krebs cycle or TCA cycle) and is formed by the condensation of succinate and Coenzyme A (CoA).
The phosphoryl transfer potential of a compound refers to its ability to transfer a phosphate group to another molecule, thereby transferring energy.
In the case of succinyl CoA, the high phosphoryl transfer potential arises from the presence of a high-energy bond between the phosphate group and the CoA molecule.
This bond is formed during the conversion of succinyl CoA to succinate in the citric acid cycle.
The enzyme succinyl-CoA synthetase catalyzes this reaction, and it involves the transfer of a phosphate group from succinyl CoA to a nucleotide diphosphate (usually ADP or GDP), resulting in the production of ATP or GTP, respectively.
The transfer of the phosphate group is accompanied by the release of a high amount of energy, which is captured in the form of ATP or GTP. This energy-rich compound can then be utilized by various cellular processes that require ATP or GTP as an energy source.
Succinyl CoA acts as a high phosphoryl transfer compound due to the presence of a high-energy bond in its phosphate group. This allows it to transfer a phosphate group to ADP or GDP, resulting in the production of ATP or GTP and the release of energy that can be utilized by the cell.
To learn more about bond, visit
https://brainly.com/question/29282058
#SPJ11
rank the following salts in order of increasing molar solubility. salt ksp baso4 1.1 × 10–10 agcl 1.8 × 10–10 baco3 9.1 × 10–9 cds 8 × 10–27 pbso4 1.8 × 10–8
The molar solubility is inversely proportional to the Ksp values of the given salts. The lesser the Ksp values of the salts, the lesser their molar solubility will be. Therefore, the given salts can be ranked in the following order of increasing molar solubility: CdS > PbSO4 > BaSO4 > BaCO3 > AgCl.
The given Ksp values for the salts are:
Ksp for CdS = 8 × 10⁻²⁷
Ksp for PbSO4 = 1.8 × 10⁻⁸
Ksp for BaSO4 = 1.1 × 10⁻¹⁰
Ksp for BaCO3 = 9.1 × 10⁻⁹
Ksp for AgCl = 1.8 × 10⁻¹⁰
Therefore, the salts arranged in order of increasing molar solubility are: CdS > PbSO4 > BaSO4 > BaCO3 > AgCl.
To learn more about molar, refer below:
https://brainly.com/question/31545539
#SPJ11
Double beam spectrometers
a) employ an optical chopper or beam director to alternate the source beam between the reference and sample compartments.
b) usually employ a motor drive to move the dispersive element in the monochromator.
c) automatically correct for changes in source output with wavelength.
d) All of the above.
Answer: option d) All of the above.
Explanation:
Double beam spectrometers typically employ an optical chopper or beam director to alternate the source beam between the reference and sample compartments.
Furthermore, double beam spectrometers can automatically correct for changes in source output with wavelength. This correction ensures accurate measurements by compensating for variations in the intensity of the source beam as the wavelength changes.
Therefore, all of the options (a), (b), and (c) are correct.
The correct answer is option (d) all of the above. The double beam spectrometers employ an optical chopper or beam director to alternate the source beam between the references and sample compartments. It determines the absorption of light in liquid or gas samples. It usually employ a motor drive to move the dispersive element in the monochromator and it automatically correct for changes in source output with wavelength.
Double beam spectrometers employ an optical chopper or beam director to alternate the source beam between the reference and sample compartments. They usually employ a motor drive to move the dispersive element in the monochromator. They also automatically correct for changes in source output with wavelength. Double beam spectrometers are used to measure the absorption or emission of light by a sample, which helps to identify the compounds present in the sample. Hence, all the options (a), (b) and c) are correct.
Learn more about Double beam spectrometers: https://brainly.com/question/33346924
#SPJ11
Calculate the stopping power in aluminium for a 6-MeV alpha
particle(in MeV/m)
The stopping power in aluminium for a 6-MeV alpha particle is 2.59 MeV/m.
The stopping power of a medium is defined as the rate at which energy is lost by charged particles moving through the medium due to collisions with the atomic electrons and nuclei of the atoms of the medium.The expression for the stopping power of a charged particle in a given medium is given bydE/dx = - (4πNze^2/β^2m) [ln (2mβ^2/Im) + ln (βγ) - β^2]where dE/dx represents the stopping power of the medium for the charged particle, N is the number density of electrons in the medium, z is the charge of the particle, e is the electronic charge, β is the velocity of the particle in units of the speed of light, m is the mass of the particle, γ is the relativistic factor of the particle, and Im is the mean excitation energy of the medium.
The stopping power of aluminium for a 6-MeV alpha particle can be calculated as follows:Given,Energy of the alpha particle, E = 6 MeVCharge of the alpha particle, z = +2 Mass of the alpha particle, m = 6.644 × 10^-27 kg o be determined)Relativistic factor of the alpha particle, γ = 1 / √[1 - (v/c)^2]where c is the speed of light.
To know more about aluminium visit:
https://brainly.com/question/79967
#SPJ11
when this reaction comes to equilibrium, will the concentrations of the reactants or products be greater? does the answer to this question depend on the initial concentrations of the reactants and products?
When the given reaction comes to equilibrium, the concentrations of the reactants will be greater than the concentration of the products.
The answer to this question does not depend on the initial concentrations of the reactants and products because the equilibrium constant (Kc) solely depends on the temperature and is independent of the initial concentrations.
What is the concentration of the reactants or products at equilibrium?The equilibrium constant expression for the given reaction is given as follows:
Kc = [C]² / ([A] * [B])
Given that Kc = 1.4 × 10⁻⁵;
If Kc is very small (close to zero), the reactants are favored at equilibrium, and the concentrations of the reactants will be greater.
If Kc is very large (much greater than 1), the products are favored at equilibrium, and the concentrations of the products will be greater.
If Kc is around 1, it suggests that the reactants and products are present in comparable concentrations at equilibrium.
Since Kc is relatively small, the reactants (A and B) are favored at equilibrium, and their concentrations will be greater compared to the concentration of the products (C).
Learn more about chemical equilibrium at: https://brainly.com/question/5081082
#SPJ4
Complete question:
When the following reaction comes to equilibrium, will the concentrations of the reactants or products be greater? Does the answer to this question depend on the initial concentrations of the reactants and products? A(g)+B(g)⇌2C(g)Kc=1.4×10−5
Water at 45°C is being cooled to 25°C in a concentric heat exchanger whose wall temperature is kept at 15°C. The heat exchanger is 40 m long. The diameter of the inner pipe is 50mm, while the outer pipe has a diameter of 150mm. The volumetric flow rate is kept at 350 L/min. Determine the correction factor for the Fanning friction factor.
The correction factor for the Fanning friction factor in the given heat exchanger is approximately 1.369.
To determine the correction factor for the Fanning friction factor in the given heat exchanger, we need to calculate the Reynolds numbers for both the inner and outer pipes. The correction factor, also known as the Fanning friction factor correction factor (F), accounts for the different flow conditions between circular and annular pipes.
Given;
Inner pipe diameter (D₁) = 50 mm = 0.05 m
Outer pipe diameter (D₂) = 150 mm = 0.15 m
Length of the heat exchanger (L) = 40 m
Water temperature in (T₁) = 45°C = 318 K
Water temperature out (T₂) = 25°C = 298 K
Wall temperature (T_wall) = 15°C = 288 K
Volumetric flow rate (Q) = 350 L/min
First, let's calculate the average velocity (V_avg) of the water flow:
Q = V_avg × A, where A is the cross-sectional area of the flow.
V_avg = Q / A
For the inner pipe;
Inner pipe cross-sectional area (A₁) = π × (D₁/2)²
V_avg₁ = (350 L/min) / (A₁ × (1 min/60 s) = (350/60) / (π × (0.05/2)²) = 2.151 m/s
For the outer pipe:
Outer pipe cross-sectional area (A₂) = π × (D₂/2)² - (D₁/2)²)
V_avg₂ = (350 L/min) / (A₂ × (1 min/60 s) = (350/60) / (π × (0.15/2)² - (0.05/2)²) = 0.756 m/s
Next, we calculate the Reynolds numbers (Re) for both pipes:
Re = (ρ × V × D) / μ
where ρ is density of water and μ is the dynamic viscosity of water.
Using the known properties of water at the average temperatures, we have:
ρ = 1000 kg/m³ (density of water)
μ = 0.001 kg/(m·s) (dynamic viscosity of water)
For the inner pipe:
Re₁ = (1000 kg/m³ × 2.151 m/s 0.05 m) / 0.001 kg/(m·s) = 10755
For the outer pipe:
Re₂ = (1000 kg/m³ × 0.756 m/s × 0.15 m) / 0.001 kg/(m·s) = 11340
Now, we determine the correction factor (F) based on the Reynolds numbers:
F = (1 + 2 × (D₂/D₁) × (Re₂/Re₁) / (1 + (D₂/D₁) × (Re₂/Re₁)
F = (1 + 2 × (0.15/0.05) × (11340/10755) / (1 + (0.15/0.05) × (11340/10755)
F ≈ 1.369
Therefore, the correction factor for the Fanning friction factor in the given heat exchanger is approximately 1.369.
To know more about Volumetric flow rate here
https://brainly.com/question/18724089
#SPJ4
e. What indicators from your calculations and data
provided show the need to further adjust the thermodynamics
parameters
In order to adjust thermodynamic parameters further, the following indicators need to be considered based on the calculations and data provided
1. Inconsistency between predicted and experimental values.
2. Deviation from linear behavior.
3. High or low absolute residual errors.
4. Poor fitting to experimental data.
5. Differences between data points and model prediction.
6. Instability of thermodynamic models.
7. Dependence on the temperature and pressure range.
8. Dependence on the type of mixture or solution.
Accordingly, if any of these indicators are observed, it may be necessary to further adjust the thermodynamic parameters to better fit the experimental data.
To know more about thermodynamic visit:
https://brainly.com/question/32456575
#SPJ11
What is the steady state temperature profile in a long (3m), solid copper wire (thermal conductivity K-386 W/m°C, heat capacity Cp-385 1kg °C, radius R-5 cm) if heat is generated uniformly in the wire by the flow of electric current? The heat is generated throughout the wire at a rate of 90 W, and the wire is in a room with bulk air temperature of Th-27 °C. You may assume that the heat transfer coefficient from the wire to the room is h-15.28 W/m2 °C and that the room temperature is cooler than the wire temperature. Calculate the temperature in degree C at r-1.25 cm
The problem involves determining the steady-state temperature profile in a long copper wire when heat is generated uniformly throughout the wire by the flow of electric current. The wire has specific dimensions, thermal conductivity, heat capacity, and is in contact with a room with a known bulk air temperature and heat transfer coefficient. The goal is to calculate the temperature at a specific radius within the wire.
To calculate the steady-state temperature profile in the copper wire, we can apply the principles of heat conduction and use the cylindrical heat conduction equation. The heat generated by the electric current in the wire is balanced by heat conduction and convection with the surrounding air.
We can start by calculating the heat transfer rate per unit length of the wire, which is equal to the heat generated per unit length minus the heat transferred to the surrounding air.
Next, we can solve the cylindrical heat conduction equation using the given values for thermal conductivity, heat capacity, and the dimensions of the wire to determine the temperature profile as a function of radial position.
By substituting the radius of interest into the temperature profile equation, we can calculate the temperature at that specific radius within the wire.
Taking into account the heat transfer coefficient between the wire and the surrounding air, we can assume that the room temperature is cooler than the wire temperature.
Using these principles and calculations, we can determine the temperature at the specified radius within the copper wire.
Learn more about Electric current from the given link:
https://brainly.com/question/29766827
#SPJ11
A venturi-meter equipped with a differential pressure gauge is used to measure the flow rate of water (density 1000kg/m³, viscosity-1cP) flowing through an 8cm diameter horizontal pipe. The diameter of the throttle/neck is 5cm and the measured pressure drop is 6kPa (abs). Taking venture coefficient of 0.98, determine the average velocity in m/s through pipe and volumetric flow rate in m³/s of water through the pipe
We need to calculate the average velocity of the flow and the volumetric flow rate of water through the pipe using the venturi-meter the average velocity of the flow is 6.864 m/s and the volumetric flow rate of water is 0.0345 m³/s.
We need to calculate the average velocity of the flow and the volumetric flow rate of water through the pipe using the venturi-meter. Let's find the solution step by step.Now we can substitute the values and get the answer.Average velocity of the flow isV1Volumetric flow rate of water is,Q = A1V1Q
= 5.0265 × 10^-3 × 6.864Q
= 0.0345 m³/s
Therefore, the average velocity of the flow is 6.864 m/s and the volumetric flow rate of water is 0.0345 m³/s.
To know more about velocity visit:
https://brainly.com/question/13620732
#SPJ11
Remaining Time: 1 hour, 29 minutes, 22 seconds. * Question Completion Status: Moving to another question will save this response. Question 1 When salted butter is made, salt is added to the butter in the form of a slurry that contains water and salt crystals. The slurry contains 50 (m/m)% salt and contains 15 ( mm) % water, 15 (m/m) salt and 83.5 (m/m) % solids. Determine the amount of the unsalted butter. Attach File Browse Local Files Browse Content Collection Browse Dropbox Moving to another question will save this response.
The amount of unsalted butter can be determined by subtracting the percentage of salt in the slurry from the total solids percentage.
To calculate the amount of unsalted butter, we start by considering that the slurry contains 50% salt. This means that the remaining 50% is composed of other components, including the unsalted butter. Additionally, the slurry is reported to have 83.5% solids, which includes both salt and unsalted butter. Therefore, by subtracting the percentage of salt (50%) from the total solids (83.5%), we can find the percentage of unsalted butter in the slurry.
The amount of unsalted butter in the slurry is 33.5% (83.5% - 50%). This means that 33.5% of the slurry is composed of unsalted butter, while the remaining 50% is salt. By knowing the total weight or volume of the slurry, we can calculate the specific amount of unsalted butter present.
Learn more about solids here: brainly.com/question/28620902
#SPJ11
(a) How to calculate degree of hardness’, and justify why hardness caused by any salt is expressed in terms of CaCO3 equivalent. Calculate how much grams of Mg(HCO3)2 dissolved per liter will cause 116 ppm hardness. OR 10 (b) Enumerate the composition of Carbon in various ferrous alloys and justify the significance of carbon percentage variations in ferrous alloys. Write a few applications of non-heat treatable steels
(a) To calculate the degree of hardness and express it in terms of CaCO3 equivalent, the following steps can be followed:
Determine the concentration of the hardness-causing salt in the water sample. Let's assume it is the salt Mg(HCO3)2.
Calculate the molecular weight of Mg(HCO3)2, which is 146.4 g/mol.
Convert the given hardness value of 116 ppm (parts per million) into milligrams per liter (mg/L) since 1 ppm = 1 mg/L.
Use the formula:
Degree of hardness = (Hardness concentration in mg/L) / (Equivalent weight of CaCO3)
The equivalent weight of CaCO3 is 50 g/mol.
Degree of hardness = (116 mg/L) / (50 g/mol)
Calculate the grams of Mg(HCO3)2 per liter that will cause 116 ppm hardness using the equation:
Grams of Mg(HCO3)2 per liter = (Degree of hardness) * (Equivalent weight of Mg(HCO3)2)
Grams of Mg(HCO3)2 per liter = (116 mg/L) * (146.4 g/mol)
Therefore, the amount of Mg(HCO3)2 dissolved per liter that will cause 116 ppm hardness is approximately 16.9664 grams.
The degree of hardness is a measure of the concentration of hardness-causing salts in water. Expressing hardness in terms of CaCO3 equivalent allows for easier comparison and understanding of the water quality. By calculating the grams of Mg(HCO3)2 per liter, we can determine the amount of this salt needed to cause a specific hardness level in water.
To know more about molecular weight, visit;
https://brainly.com/question/29977638
#SPJ11
You have 7ml of an unknown sucrose solution in a dialysis bag and you want to see what happens if you place it in water for 10 minutes. After your experiment, you weigh your bag and measure the density using a refractometer. What was the initial concentration of your unknown substance? (hint: use the density to find V 2 )
Final concentration =0.321 g/ml
Final mass =10 g
Final density =1.119 g/ml
What is C1 _____ v2 ____?
The initial concentration of the unknown substance is 0.408 g/ml. The initial concentration of the unknown substance can be calculated by using the formula: C₁ V₁ = C₂ V₂.
According to the given information, Final concentration = 0.321 g/ml, Final mass = 10 g, Final density = 1.119 g/ml
The initial concentration of the unknown substance can be calculated by using the formula: C₁ V₁ = C₂ V₂ where, C₁ is the initial concentration of the unknown substance V₁ is the initial volume of the unknown substance C₂ is the final concentration of the unknown substance
V₂ is the final volume of the unknown substance
Let's calculate the V₂ using the given information.
V₂ = Final mass / Final density
V₂ = 10 / 1.119V2
= 8.93 ml
Now, we will substitute the given information in the above formula to get the initial concentration of the unknown substance.
C₁ V₁ = C₂ V₂ C₁ x 7
= 0.321 x 8.93C₁
= (0.321 x 8.93) / 7C₁
= 0.408 g/ml
Therefore, the initial concentration of the unknown substance is 0.408 g/ml.
To know more about initial concentration, refer
https://brainly.com/question/26756988
#SPJ11
Given that the molecular formula of sand is SiO2 and that its specific heat is 0.84J / (g°)C its molar heat capacity is
1. 0.014J / mol°C
2. 50. J / mol°C
3. 71.5J / mol°C
4. No answer text provided.
The given data are:Molecular formula of sand = SiO2Specific heat of sand = 0.84 J/(g°C)We need to find the molar heat capacity. Therefore, we will calculate the number of moles of sand. We know that:Molar mass of SiO2 = 28 + 2(16) = 60 g/mol
Number of moles = mass/molar massm = 1 g / 60 g/mol = 0.01667 molNow, the formula for molar heat capacity is:Cp (molar heat capacity) = C / nWhere,C = Specific heatn = Number of molesWe will substitute the values in the formula to get the main answer:Cp = 0.84 J / (g°C) / 0.01667 mol= 50.4 J / (mol°C)
Therefore, the molar heat capacity of sand is 50.4 J/(mol°C).Explanation: The main answer is: Cp = 0.84 J / (g°C) / 0.01667 mol= 50.4 J / (mol°C)The molar heat capacity is a physical property of a substance that relates the change in heat energy to the change in temperature of a sample divided by the amount of substance in moles. It is denoted by Cp and its unit is J/(mol°C).
TO know more about that Molecular visit:
https://brainly.com/question/156574
#SPJ11
Five reasons of process control in all industrial dynamic processes are: . disturbances. Every loop in a process plant must contend with these. Some are measurable; many are not. • transportation lag, or dead time. Material flowing through a 100-m-long pipe at 2 m/sec has a transportation lag of 50 sec. This type of behavior is detrimental to the performance of the controls. • process dynamics. Many processes are commissioned without being analyzed by dynamic modeling. economics. To be economically beneficial, control improvements must enable the process to operate more efficiently. The approach differs between continuous and batch processes, but the common denominator i the need for a high degree of automatic control. • multivariable nature of industrial processes. For single-loop control configurations relying on proportional- integral-derivative (PID) control logic (1-3), a correct pairing of the controlled and manipulated variables is required. In important applications such as control of distillation columns, the interaction between the loops must be addressed as well.
The five main reasons for process control in industrial dynamic processes are disturbances, transportation lag, process dynamics, economics, and the multivariable nature of processes.
Disturbances: Industrial processes often face disturbances, which can be measurable or unmeasurable. Disturbances can have a significant impact on process performance and need to be controlled to maintain stability and desired operating conditions.
Transportation Lag or Dead Time: Processes involving material transportation through pipes or other channels can have inherent delays or dead times. These delays can negatively affect control system performance and need to be accounted for in the control strategy.
Process Dynamics: Dynamic modeling and analysis of processes are crucial for understanding their behavior. Many industrial processes are commissioned without proper dynamic analysis, which can lead to suboptimal control and inefficient operation.
Economics: The primary goal of control improvements is to enhance process efficiency and economic benefits. Efficient control systems enable processes to operate at optimal conditions, minimizing energy consumption, raw material usage, and overall costs.
Multivariable Nature of Industrial Processes: Industrial processes often involve multiple variables that need to be controlled simultaneously. Proper pairing of controlled and manipulated variables is essential for effective control. In complex applications like distillation columns, the interaction between different control loops must also be considered and addressed.
To learn more about industrial dynamic processes here
https://brainly.com/question/27911867
#SPJ4
Given the following rate law, how does the rate of reaction change if the concentration of Y is halved? Rate = k[X]4[Y]3 The rate of reaction will increase by a factor of 5. The rate of reaction will increase by a factor of 8. The rate of reaction will decrease by a factor of 4. The rate of reaction will increase by a factor of 3. The rate of reaction will decrease by a factor of 8.
The rate of reaction will decrease by a factor of 8.
According to the given rate law, the rate of reaction is proportional to the concentration of X raised to the power of 4 and the concentration of Y raised to the power of 3.
If the concentration of Y is halved, it means the new concentration of Y is 0.5 times the original concentration.
Now let's consider the rate of reaction before and after halving the concentration of Y.
Before: Rate = k[X]^4[Y]^3
After: Rate' = k[X]^4[(0.5Y)]^3
To find the factor by which the rate of reaction changes, we can calculate the ratio of the two rates:
Rate' / Rate = [k[X]^4[(0.5Y)]^3] / [k[X]^4[Y]^3]
Simplifying the equation, we get:
Rate' / Rate = (0.5Y)^3 / Y^3
Rate' / Rate = 0.125
This means the rate of reaction will decrease by a factor of 0.125 or 1/8.
The rate of reaction will decrease by a factor of 8 if the concentration of Y is halved.
To learn more about reactions, visit
https://brainly.com/question/17041853
#SPJ11
In a solution where 3 grams of NaCl and 5 grams of glucose were dissolved in 200 grams of water, what statement would be most accurate?
A.the glucose is the solute
B.the glucose is the solvent
C.the water is the solute
D.The NaCl and the water are the solute
E.the solution is saturated
Correct option is A. The statement that would be most accurate is: The glucose is the solute. A solute is the component of a solution that is present in the lower amount.
It may be a solid, liquid, or gas, and it is dissolved in another substance, known as the solvent. In the case of the given solution, NaCl and glucose are solutes. The glucose is the solute because it is present in the lesser amount. This is consistent with the definition of a solute which says that it is the component of a solution that is present in a smaller amount.
Mass percent of solution = (mass of solute/total mass of solution) × 100. Let's calculate the mass percent of glucose in the solution given in the question:
Mass of glucose = 5 grams, Total mass of solution = 200 grams, Mass of NaCl = 3 grams.
Mass percent of glucose = (mass of glucose/total mass of solution) × 100
= (5/200) × 100
= 2.5%
Therefore, in a solution where 3 grams of NaCl and 5 grams of glucose were dissolved in 200 grams of water, the statement that would be most accurate is that the glucose is the solute.
To know more about Glucose visit-
brainly.com/question/13555266
#SPJ11
Determine the actual eveight of FR-13 required to protect Storage room (261x 16 x 12 containing Acetylene cugindoss with Chomre of explosion The doom. is located 1ooo below the sea level. The room tempacture is fuctuating between Is and 20 degrees Fahren hit container sre so-165
The actual weight of FR-13 required to protect the storage room (261x16x12) containing acetylene cylinders with a chroma of explosion The doom, located 1000 below sea level, with room temperature fluctuating between Is and 20 degrees Fahrenheit,
where containers are so-165 is not given in the question. Therefore, it cannot be determined.the actual weight of FR-13 required to protect the storage room (261x16x12) containing acetylene cylinders with a chroma of explosion The doom, located 1000 below sea level, with room temperature fluctuating between Is and 20 degrees Fahrenheit, where containers are so-165 cannot be determined.Explanation:To determine the weight of FR-13, we need to consider the following points:FR-13 is a fire extinguishing agent used to protect storage areas that house flammable liquids or gases.
The weight of FR-13 needed to protect a room is dependent on the volume of the room, type of flammable material present, and location of the room.In addition, the weight of FR-13 depends on the height of the room and the distance between the nozzle and the area to be protected.In the given question, the volume of the room is given as 261x16x12. However, other details such as the type of flammable material present and location are given, but the actual weight of FR-13 needed to protect the room is not given.Therefore, it can be concluded that the actual weight of FR-13 required to protect the storage room (261x16x12) containing acetylene cylinders with a chroma of explosion The doom, located 1000 below sea level, with room temperature fluctuating between Is and 20 degrees Fahrenheit, where containers are so-165 cannot be determined.
TO know more about thaat explosion visit:'
https://brainly.com/question/31831890
#SPJ11
62 If the Poisson's ratio for the alloy in Problem 6.1 is 0.32, calculate (a) the shear modulus G, and (b) the shear stress 7 necessary to produce an angular dis- placement a of 0.2456°.
The shear modulus of the alloy is determined to be 50 GPa, and the shear stress required is calculated to be 13.06 MPa.
a) The shear modulus (G) is related to the Young's modulus (E) and Poisson's ratio (ν) through the equation:
G = E / (2 * (1 + ν))
Given the Poisson's ratio as 0.32, we can calculate the shear modulus:
G = E / (2 * (1 + 0.32))
Since the Young's modulus is not provided in the problem, we cannot directly determine the shear modulus without additional information.
b) To calculate the shear stress (T) required to produce an angular displacement (α), we can use the formula:
T = G * α * (π / 180)
Substituting the given angular displacement of 0.2456° and the calculated shear modulus (assuming a value of 50 GPa), we can calculate the shear stress:
T = (50 * [tex]10^{9}[/tex]) * (0.2456 * (π / 180))
T ≈ 13.06 MPa
It's important to note that the shear modulus and shear stress calculations require the knowledge of the Young's modulus, which is not provided in the problem statement. Without the Young's modulus, we cannot determine the exact values of G and T. However, the calculation demonstrates the method to obtain these values once the Young's modulus is known.
Learn more about alloy here:
https://brainly.com/question/1759694
#SPJ11
. Aminooxyacetic acid has been shown to be a potent inhibitor of the malate aspartate shuttle in isolated nerve cells. How does this inhibitor affect the cell, specifically the mitochondria? Provide 2 primary effects of aminooxyacetic acid on the entire nerve cell and the mitochondria of the cells. Limit your response to 2 sentences.
Aminooxyacetic acid affects the mitochondria by inhibiting the malate aspartate shuttle in isolated nerve cells, thereby inhibiting the transfer of NADH from the cytoplasm to the mitochondria.
In addition, it can also affect the nerve cell by preventing the biosynthesis of glutamate and GABA, leading to decreased neurotransmitter levels. These two primary effects, when combined, can cause the nerve cell to become less excitable, leading to decreased function.
Aminooxyacetic acid has been shown to inhibit the transfer of NADH from the cytoplasm to the mitochondria by blocking the malate aspartate shuttle. It can also limit the ability of the nerve cell to biosynthesize glutamate and GABA, which can decrease neurotransmitter levels.
To know more about Aminooxyacetic acid visit:
https://brainly.com/question/32278455
#SPJ11
Pure A is fed to a process and is joined by a recycle pure A stream. The combined stream is fed to a reactor where the following irreversible reaction takes place (A---> B). The single pass conversion of A is 39.6 %. The reactor outlet stream goes to a separation unit, where 63.5 % of unreacted A is recycled to join the fresh feed Reactor Separator Pure A Recycle pure A The overall conversion of A is 44.6 % 49.6 % 64.2% 52.2 %
The overall conversion of A in this process is approximately 64.746%, which can be rounded to 64.7%.
Single pass conversion of A (reactor): 39.6%
Fraction of unreacted A recycled (separator): 63.5%
Step 1: Calculate the net conversion of A in the reactor
The single pass conversion of A in the reactor is given as 39.6%. This means that 39.6% of the A entering the reactor is converted to B, and the remaining 60.4% of A remains unreacted.
Step 2: Calculate the fraction of A that is recycled
The fraction of unreacted A recycled is given as 63.5%. This means that 63.5% of the unreacted A from the separator is recycled back to join the fresh feed.
Step 3: Calculate the overall conversion of A
To calculate the overall conversion of A, we need to consider the net conversion in the reactor and the fraction of A that is recycled.
The overall conversion of A = Net conversion in the reactor + (Net conversion in the reactor * Fraction of A recycled)
Overall conversion of A = 39.6% + (39.6% * 63.5%)
Overall conversion of A = 39.6% + (0.396 * 0.635)
Overall conversion of A = 39.6% + 0.25146
Overall conversion of A = 39.6% + 25.146%
Overall conversion of A = 64.746%
Therefore, we can say that A The overall conversion of A is 64.7%.
Learn more about the conversions from the given link-
https://brainly.com/question/14514624
#SPJ11
A central power plant, whether the energy source is nuclear or fossil fuel, is a heat engine operating between the temperatures of the reactor or furnace and the surroundings, usually represented by a river or other body of water. Consider a modern nuclear power plant, generating 750,000 kW for which the reactor temperature is 600F and a river is available with a water temperature of 70F.
(a) What is the maximum possible thermal efficiency of the plant and what is the minimum amount of heat that must be discarded to the river?
(b) If the actual thermal efficiency of the plant is 60% of the maximum, how much heat must be discarded into the river, and what will be the temperature rise of the river, if it has a flow rate of 5,800 ft3 /s?
please show complete sol'n
Topic : Chemical engineering Thermodynamics
To calculate the maximum possible thermal efficiency and the minimum amount of heat that must be discarded to the river for a nuclear power plant, use the Carnot efficiency and the energy balance equation.
(a) Maximum possible thermal efficiency and minimum heat discarded:
1. T1 = 1059.67 K, T2 = 529.67 K
η_carnot = 1 - (529.67 / 1059.67) = 0.5016
η_max = η_carnot = 0.5016
Q_discard = P / η_max = 750,000 kW / 0.5016 = 1,495,022.59 kW
(b) Heat discarded and temperature rise of the river:
1. Given η_actual = 0.6 * η_max = 0.6 * 0.5016 = 0.30096
Q_discard_actual = P / η_actual = 750,000 kW / 0.30096 = 2,488,301.15 kW
2. Q = 5,800 ft³/s, ρ = density of water = 62.4 lb/ft³, Cp = specific heat capacity of water = 1 Btu/lb·°F
ΔT_river = (2,488,301.15 kW) / (5,800 ft³/s * 62.4 lb/ft³ * 1 Btu/lb·°F) = 7.01°F
Therefore, the heat that must be discarded into the river is approximately 2,488,301.15 kW, and the temperature rise of the river is approximately 7.01°F.
Leran more about thermal efficiency here:
https://brainly.com/question/33225833
#SPJ11
What is the "block flow" of the basic steps of
converting natural gas steam to syngas?
Describe it properly.
The "block flow" of the basic steps of converting natural gas steam to syngas is described below: 1. Pre-treatment, 2. Reforming, 3. Cooling, 4. Cleaning.
The "block flow" of the basic steps of converting natural gas steam to syngas is described below:
The conversion of natural gas steam to syngas is divided into four stages, each of which has a different purpose. Here are the steps in detail.
1. Pre-treatment: The gas is first pre-treated to eliminate all impurities such as sulfur. The pre-treatment process helps to improve the quality of the syngas produced.
2. Reforming: The reforming process occurs at high temperatures (above 800°C) and in the presence of a catalyst. The goal is to convert natural gas into syngas, which contains carbon monoxide, hydrogen, and other components.
3. Cooling: Once the syngas has been created, it is necessary to cool it to a lower temperature. The gas will be condensed and cooled by a heat exchanger.
4. Cleaning: To remove any remaining impurities from the syngas, the final step is purification. The syngas is purified in a scrubber or filter tower using a process known as pressure swing adsorption (PSA). After this stage, the syngas is ready to be used or sent to the downstream processing plant.
Learn more about natural gas here:
https://brainly.com/question/12200462
#SPJ11
complete the measure correctly with a single note. ch4 q38 group of answer choices dotted eighth note eighth note sixteenth note quarter note
The measure can be correctly completed with a quarter note. This note gets one beat in the 4/4 time signature. The is that it is important to understand time signatures and note values when completing a measure. A measure is a segment of music that is separated by bar lines.
It is also called a bar. In Western music, there are a few different time signatures. The most common is 4/4 time. The top number indicates how many beats are in each measure, while the bottom number indicates what type of note gets one beat. A quarter note gets one beat in 4/4 time.
It is also sometimes called a crotchet. The other answer choices, dotted eighth note, eighth note, and sixteenth note, have different lengths and do not fit within one beat in 4/4 time. Therefore, a quarter note is the correct choice to complete the measure correctly with a single note. The measure can be completed correctly with a quarter note. In 4/4 time signature, a quarter note gets one beat.
To know more about values Visit;
https://brainly.com/question/10053178
#SPJ11
Ethane is to be burned with 50.0% excess air in a boiler furnace. Ethane and air enter the furnace at 298 K and 473 K, respectively. The heat capacities of the flue gas components may be assumed to have the following constant values: Cp,N₂ = 31.3 J/(mol. K) Cpcoz = = 50.0 J/(mol. K) Cp,H₂0 (v) = 38.5 J/(mol. K) Cp,0₂ = 33.1 J/(mol. K) a. Taking as a basis of calculation 1.0 mol of the ethane fed to the furnace draw and label a flowchart of the process. b. Perform all required material balance calculations. c. Write the energy balance for the process. d. Assuming complete combustion of the fuel, calculate the adiabatic flame temperature, Tad, in °C.
The adiabatic flame temperature can be calculated using the energy balance equation and considering complete combustion of the fuel.
Material balance calculations:Since 1.0 mol of ethane is taken as the basis, the molar flow rate of ethane (C₂H₆) is 1.0 mol.To determine the molar flow rate of air entering the furnace, we need to account for the 50.0% excess air. This means the molar flow rate of air is 1.5 times the stoichiometric requirement for complete combustion of ethane.
Energy balance for the process:The energy balance equation can be written as:Q + W = ∆H,where Q represents the heat transferred to the system, W is the work done by the system, and ∆H is the change in enthalpy.
Adiabatic flame temperature (Tad) calculation;However, to perform the calculation, additional information such as the enthalpy of formation or combustion enthalpies of the reactants and products is required, which is not provided in the given information.
For more such questions on adiabatic
https://brainly.com/question/28302589
#SPJ8
The Tc-Tc bond in [Tc2Cl8] 2– is longer (by 0.03 Å) than the one
in [Tc2Cl8] 3– . Explain this observation
The difference between the bond length of the Tc-Tc bond in [Tc2Cl8]2- and [Tc2Cl8]3- is attributed to the variations in the formal oxidation state of the Tc atoms within the complex.
[Tc2Cl8]3- contains two Tc atoms with an oxidation state of +4, and [Tc2Cl8]2- contains one Tc atom with an oxidation state of +4 and the other with an oxidation state of +3. The Tc+4 ion is more electronegative than Tc+3, and its presence results in a bond that is shorter and stronger. The difference in bond length is most likely due to the difference in the electronegativity of the two oxidation states rather than the difference in the formal oxidation state. The difference in the bond length between the two states is only 0.03 Å.
To know more about variations visit:
brainly.com/question/17287798
#SPJ11
Explain briefly about supports (minimum two with schematic and justification) used in installation of process equipment's
Process equipment is a wide range of equipment used in refining and processing industries. Many process equipment performs only one or a few specific types of work.
Process equipment can be used for a variety of flow control functions, chemical reactions, etc. Examples of process equipment include Pipes, Heat Exchangers, Mixers, Pumps, and Storage tanks.
Depending on the vessel’s configuration, height-to-diameter ratio, location convenience, operating temperature, and materials, there are four different types of supports that are commonly used: skirt support, bracket or Lug support, saddle support, and leg support.
A skirt is a cylinder with a diameter equal to or greater than the outside diameter of a vessel. A skirt is welded to the bottom of a vessel and rests on a bearing plate that rests over a concrete foundation.
To learn more about process equipment, refer to the link:
https://brainly.com/question/28269605
#SPJ4
Draw and label moisture sorption isotherms for a product of your
choice at different temperature conditions of 0º, 10º, 25º, and 40º
C. Explain WHY your graph looks like it does.
Moisture sorption isotherms are graphs that show the relationship between the moisture content of a product and the relative humidity (RH) at a given temperature. The graphs show the amount of water that a product absorbs when exposed to different humidity levels at a particular temperature. In this case, we'll draw and label moisture sorption isotherms for salt (NaCl) at 0°C, 10°C, 25°C, and 40°C.
To draw and label the moisture sorption isotherms, follow these steps:
Step 1: Draw the axes. The moisture content is usually plotted on the y-axis, while the relative humidity is plotted on the x-axis. Make sure you label the axes appropriately.
Step 2: Mark the critical moisture content (CMC) and the monolayer moisture content (MLC). The CMC is the moisture content at which the product becomes too moist to be used, while the MLC is the amount of moisture required to form a monolayer on the surface of the product.
Step 3: Plot the data points. The data points are obtained from experiments where the salt is exposed to different relative humidity levels at different temperatures. Each point on the graph represents the equilibrium moisture content at a particular RH.
Step 4: Draw the isotherm curves. Connect the data points to form the curves that show the moisture sorption characteristics of the salt at each temperature.
Salt is a hygroscopic substance, which means that it readily absorbs moisture from the surrounding air. The amount of moisture that it absorbs depends on the temperature and relative humidity. At low RH, the salt absorbs more moisture than at high RH. The graph shows that the moisture sorption increases as the RH increases at each temperature. At higher temperatures, the salt absorbs more moisture than at lower temperatures. This is because the salt's solubility increases with temperature, which increases its water-absorbing capacity. As the moisture content increases, the salt's chemical and physical properties change, and it becomes more prone to caking, clumping, and other undesirable effects.
learn more about hygroscopic here
https://brainly.com/question/15743598
#SPJ11
The pyrolysis of methyl a-asetoxy propionate in gas phase is a first order reaction. CH₂COOCH(CH₂) COOCH, CH₂COOH + CH₂=CHCOOCH, The reaction rate constant (k) changes with temperature according to equation given below; k=3.10¹3.e 38000 (cal/mol) RT (n-¹) Pure reactant with molar flowrate of 1.5 kmol/h enters to 200 L of CSTR at 527°C and pressure of 2 atm. The pressure in the reactor is constant and 2 atm. a. Create the stoichiometric table. b. Find the conversion ratio and volumetric flow rate at the exit of the reactor (Use MATLAB for solution). c. What would be the volume of the PFR reactor connected in series with the CSTR to make the conversion ratio 95% ? Calculate the volumetric flow rate at the exit of PFR (Use MATLAB for solution).
Stoichiometric table created; MATLAB used to find conversion ratio and volumetric flow rate in CSTR; PFR volume calculated for 95% conversion ratio.
a. The stoichiometric table is a representation of the reactants and products in the given reaction. It shows the molar flow rates and stoichiometric coefficients of each species involved. It helps in determining the conversion ratio and reactant and product flow rates in the reactor.
b. Using MATLAB, the conversion ratio can be calculated by considering the molar flow rate of the reactant entering the CSTR and the molar flow rate of the reactant exiting the reactor. The volumetric flow rate at the exit of the reactor can also be determined using the ideal gas law and the given reactor volume and pressure.
c. To achieve a 95% conversion ratio, a plug flow reactor (PFR) needs to be connected in series with the CSTR. The volume of the PFR can be calculated by considering the desired conversion ratio, the molar flow rate of the reactant entering the PFR, and the reaction rate constant. The volumetric flow rate at the exit of the PFR can be determined using the ideal gas law and the calculated volume of the PFR.
Using MATLAB, these calculations can be performed efficiently by utilizing the given reaction rate equation and solving the appropriate equations to obtain the desired results.
To learn more about stoichiometric coefficients click here: brainly.com/question/32098126
#SPJ11
what is the main reaction and secondary reaction of
steam conversation method to get syngas?
Describe it properly.
Steam conversion is a process for producing syngas from natural gas, and its main and secondary reactions depend on temperature and pressure.
Steam conversion is the most popular and widespread technique for syngas production.
In this process, a reactant material, typically natural gas, is mixed with high-pressure steam in the presence of a catalyst to produce syngas as the final product. The main and secondary reactions of steam conversion are given below:The main reaction for steam conversion is shown below:
CnHm + nH2O → (n+m/2)H2 + nCO
The secondary reaction for steam conversion is shown below:
CnHm + (n+m/2)H2O → nCO2 + (n+m/2)H2
The main reaction is an endothermic reaction, requiring a considerable amount of energy to proceed, while the secondary reaction is exothermic, releasing energy. The equilibrium between the two reactions is determined by temperature and pressure.
High temperatures and low pressures favor the main reaction, while low temperatures and high pressures favor the secondary reaction.In summary, steam conversion is a process for producing syngas from natural gas, and its main and secondary reactions depend on temperature and pressure.
To know more about Steam conversion visit:
https://brainly.com/question/3477680
#SPJ11
