Classify each of the following as a strong acid or a weak acid and indicate how each should be written in aqueous solution. Classify ... In solution this acid should be written as: weak 1. hydrocyanic acid H3O CN- _______ 2. hydrobromic acid

Answers

Answer 1

Answer:

HCN, weak acid

H⁺, Br⁻, strong acid

Explanation:

Hydrocyanic acid is a weak acid, according to the following equation.

HCN(aq) ⇄ H⁺(aq) + CN⁻(aq)

Thus, it should be written in the undissociated form (HCN).

Hydrobromic acid is a strong acid, according to the following equation.

HBr(aq) ⇒ H⁺(aq) + Br⁻(aq)

Thus, it should be written in the ionic form (H⁺, Br⁻).


Related Questions

Potassium carbonate, K 2CO 3, sodium iodide, NaI, potassium bromide, KBr, methanol, CH 3OH, and ammonium chloride, NH 4Cl, are soluble in water. Which produces the largest number of dissolved particles per mole of dissolved solute

Answers

Answer:

Potassium carbonate (K₂CO₃)

Explanation:

The compounds dissociate into ions in water, as follows:

K₂CO₃ → 2 K⁺ + CO₃⁻    ⇒ 3 dissolved particles per mole

NaI → Na⁺ + I⁻    ⇒ 2 dissolved particles per mole

KBr → K⁺ + Br⁻   ⇒ 2 dissolved particles per mole

CH₃OH → CH₃O⁻ + H⁺  ⇒ 2 dissolved particles per mole

NH₄Cl → NH₄⁺ + Cl⁻   ⇒ 2 dissolved particles per mole

Therefore, the largest number of dissolved particles per mole of dissolved solute is produced by potassium carbonate (K₂CO₃).

The metal thallium becomes superconducting at temperatures below 2.39K. Calculate the temperature at which thallium becomes superconducting in degrees Celsius. Round your answer to decimal places.

Answers

Answer:

-270.76°C

Explanation:

Given that metal Thallium becomes superconducting below the temperature of 2.39 kelvin i.e. this temperature is critical temperature for Thallium and below critical temperature a metal offers no resistance to the flow of electric current. Also the metal below its critical temperature expels the magnetic field in such a way that they do not penetrate the metal and pass through its surface only.

We have the relation between kelvin scale and degree Celsius scale of temperature measurement as:

[tex]C = K - 273.15[/tex]

[tex]C=2.39-273.15\\ C=-270.76^{o}C[/tex]

For an ideal gas, classify the pairs of properties as directly or inversely proportional. You are currently in a sorting module. a. P and n b. V and n c. P and T d. T and V e. P and V1. directly proportional2. inversely proportional

Answers

Answer:

the result for the following are (a) P is directly proportional to n

(b) V is directly proportional to T (c) P is directly proportional to T (d) T is inversly proportional to V (e) P is inversely proportional to V

When sugar is added to a sugar solution, the sugar dissolves. Which term describes the original sugar solution?​

Answers

Answer:

the answer is D .................

Determine the percentage of carbon and hydrogen in ethane C2H6 if the molecular weight is 30.

Answers

Answer:

Percentage of carbon:

[tex] { \tt{ = \frac{24}{30} \times 100\%}} \\ = 80\%[/tex]

Percentage of hydrogen:

[tex]{ \tt{ = \frac{6}{30} \times 100\%} } \\ = 20\%[/tex]

How many stereoisomers are possible for CHCl3 provided that the central carbon has a tetrahedral geometry

Answers

Answer:

How many stereoisomers are possible for CHCl3 provided that the central carbon has tetrahedral geometry?

Explanation:

The stereoisomers are the molecules with the same molecular formula but the different spatial arrangements of atoms around the central atom.

For the given molecule, [tex]CHCl_3[/tex]

only one spatial arrangement is possible.

Hence, one stereoisomer is possible.

It is shown below:

All light waves can be described in terms of their speed, frequency, and___

Answers

Answer:

all light waves can be described in terms of their speed, frequency and wavelength

Explanation:

Hope it helps u.....

A compound has a formula mass of 228.0 and an empirical formula of C2H4O3. What is the molecular formula

Answers

Answer:

C₆H₁₈O₉

Explanation:

First we calculate the molar mass of the compound represented by the empirical formula:

Molar Mass = (Molar mass of C) * 2 + (Molar Mass of H) * 4 + (Molar Mass of O) * 3Molar Mass = 12 * 2 + 1 * 4 + 16 * 3 = 76 g/mol

Then we divide the given formula mass by the calculated molar mass:

228 / 76 = 3

Thus we multiply by 3 the subscripts in the empirical formula:

The molecular formula is C₆H₁₈O₉

How do I answer the question in bold? Thank you!

Answers

Answer:

6.7855 * 10^18

Explanation:

There are 2 moles in H2

Avagadro's number: 6.022E23

8.14E42*1/6.022E23 * 1/2

=6.7855 * 10^18

What is the volume of a flask containing 0.199mol of Cl2at a temperature of 313K and a pressure of 1.19atm

Answers

Answer:

43.0 L

Explanation:

Step 1: Given and required data

Moles of chlorine gas (n): 0.199 molTemperature (T): 313 KPressure (P): 1.19 atmIdeal gas constant (R): 0.0821 atm.L/mol.K

Step 2: Calculate the volume of the flask (V)

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L

The answer is 4.30 L

How many molecules of C 2H 5Br will be present if you had 4.52 g of this compound?

Answers

okay ty what what happened to me lol lolhope this helps i lol lol oh yeah that’s okay lol lol yeah lol lol !!! hope it helps :)

A chemist measures the amount of iodine solid produced during an experiment. He finds that of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to significant digits.

Answers

The question is incomplete, the complete question is:

A chemist measures the amount of iodine solid produced during an experiment. He finds that 8.31 g of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to the correct number of significant digits.

Answer: The number of moles of solid iodine produced is 0.0327 moles

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of solid iodine = 8.31 g

Molar mass of solid iodine = 253.8089 g/mol

Plugging values in equation 1:

[tex]\text{Moles of solid iodine}=\frac{8.31g}{253.8089g/mol}=0.0327mol[/tex]

Hence, the number of moles of solid iodine produced is 0.0327 moles

A certain liquid has a normal boiling point of and a boiling point elevation constant . A solution is prepared by dissolving some urea () in of . This solution boils at . Calculate the mass of that was dissolved. Round your answer to significant digits.

Answers

This question is incomplete, the complete question is;

A certain liquid X has a normal boiling point of 150.4 °C and a molar boiling point elevation constant kb is 0.60 °Ckgmol⁻¹.

A solution is prepared by dissolving some urea (NH22CO) in 750 g of X. This solution boils at 150.9 °C . Calculate the mass of urea that was dissolved. Round your answer to 3 significant digits.

Answer:

the mass of urea that was dissolved is 37.5 g

Explanation:

Given the data in the question;

normal boiling point of X; Tb⁰ = 150.4 °C

boiling point of solution Tb = 150.9 °C

Change in boiling point Δt = Tb - Tb⁰  = 150.9 °C - 150.4 °C = 0.5 °C

Kb = 0.6 °C.kg.mol⁻¹

V = 750 g

Now, we know that

Δt = Kb × molality

so

0.5 = 0.6 × molality

molality = 0.5 / 0.6

molality = 0.833

we know that molar mass of urea is 60 g/mol

so

molality = mass × 1000 / molar mass × volume( g )

we substitute

0.833 = ( mass × 1000 ) / ( 60 × 750 )

0.833 = ( mass × 1000 ) / 45000

0.833 × 45000 = mass × 1000

mass = ( 0.833 × 45000 ) / 1000

mass = 37485 / 1000

mass = 37.485 ≈ 37.5 g   { 3 significance figure }

Therefore, the mass of urea that was dissolved is 37.5 g

What is the density of Ar(g) at -11°C and 675 mmHg?

Answers

Answer:

The Density Of Ar (g) At -11°C And 675 MmHg (R =0.08206 L·atm/mol·K, 1 Atm = 760mmHg).

Please help me, I don't bite. 3.

Answers

Answer:

jjjjjjjjj

Explanation:

hhhhhhhhhhh

which straight-chain alkane would you predict to be the most viscous? all are liquids exhbiting the general bonding pattern ch3-(ch2)n-ch3

Answers

The question is incomplete, the complete question his;

Which straight chain alkane below would you predict to be the most viscous? Why? All are liquids exhibiting the general bonding pattern CH3-(CH2)n-CH3

C9H20

C10H22

C5H12

C6H14

C12H26

Answer:

C12H26

Explanation:

Generally, the viscosity of a liquid increases with increase in molecular mass of the substance.

Liquids of high molecular mass do not flow easily. This means that they posses high viscosity.

Thus, since C12H26 has the highest molecular mass among the options given in the question, C12H26 exhibits the greatest viscosity.

A calorimeter has been filled with 75 mL of water. The density of water at 25 °C is
0.998 g/mL. How many grams of water do you have at 25°C?

Answers

Answer:

isn't it 0.998

Explanation:

cause 0.998 is in the same grams / mole. I don't get

A calorimeter has been filled with 75 mL of water. The number of grams of water is 74.85 grams.

What is a calorimeter?

A calorimeter is an instrument that is used to measure calorimetry. It is used to measure the heat of chemical reactions and physical and chemical changes.

Mass is the quantity of matter in a physical body. Volume is the space occupied by a three-dimensional object. Mass is the quantity of matter in a physical body. The product of the compound's molar mass and the substance's moles are defined as mass.

Given, that the volume of the water is 75 mL

The temperature of the water is 25 °C

The density of water is 0.998 g/mL

To calculate the mass, the volume is multiplied by density.

Mass = volume x density

putting the values in the formula

75 x  0.998 = 74.85 grams

Thus, the grams of water that have at 25°C is 74.85 grams.

To learn more about density, refer to the link:

https://brainly.com/question/26304205

#SPJ2

1. Calculate the percent recovery of benzoic acid, naphthalene and 3-nitroaniline if you were able to collect 10.75 g of benzoic acid, 5.41 g of naphthalene, and 7.81 g of 3-nitroaniline from a set of extractions. The starting mass of the mixture was 25.04 g. (0.6 pt) 2. Describe why it is important to use sodium hydroxide and hydrochloride acid in this experiment. Why was it necessary to initially start off with a 5% solution of the acid or base for this experiment

Answers

Explanation:

1.)

mass = 25.04

percentage recovery

[tex]benzoic acid = \frac{10.75}{25.04} = 0.4293*100 = 42.93%\\[/tex]

[tex]naphtalene =\frac{5.41}{25.04} = 0.2160*100 = 21.60\\3-nitroaniline=\frac{7.81}{25.04} =0.3119*100=31.19[/tex]

2. This experiment has these compounds, benzoic acid (which is an acid), naphthalene (this is neutral) and 3-nitroaniline (this is a base).

to extract, 5 percent of NaOH has to be used in order for benzoic acid to become with sodium hydroxide. the salt would then dissolve in H2O, the other two remaining are going to dissolve in organic layer. and this would make benzoic acid to leave the mix.

we make use of 5 percent of HCl so that the 3-nitroaniline will turn into ammonium salt with the hcl, then the ammonium salt would dissolve in water and naphtalene would become soluble in organic layer. when this happens we would then have the three compounds separated.

If mercury barometer is replaced by water barometer, height of water column

i. will be less than that of Hg Column
ii. will be greater than that of Hg column iii. will be equal to that of Hg column
iv. will be none of these​

Answers

Answer:

answer is first one 1 will be less then that of hg coloumn

Arrange aluminum, boron, nitrogen, and phosphorous in order of increasing electronegativity.

a. Al < N < P < B
b. Al < B < P < N
c. N < P < B < Al
d. B < Al < N < P

Answers

Answer:

Option b.

Al < B < P < N

Explanation:

Electronegativity is the capacity of an atom to attract electrons.

Usually, if we look at the periodic table, the elements in the left are the ones with the least electronegativity, and as we go to the right, the electronegativity increases (this is not really exact)

There are a lot of tables of electronegativity that can be used here, we can find that:

element:    electronegativity:

    N                         3.04

    B                          2.04

    P                          2.19

    Al                          1.61

So, the order from least to greatest is:

Al, B, P, N

Then the correct option is:

b: Al < B < P < N

What is the first step in the curved arrow mechanism for the chlorination of benzene in the presence of FeCl3

Answers

Answer:

See explanation

Explanation:

The chlorination of benzene occurs in the presence of a Lewis acid. A Lewis acid is a compound that can accept a lone pair of electrons.

The first step in the chlorination of benzene is the formation of the ion Cl^+ which attacks the benzene ring.

This ion is formed when the Cl2 molecule undergoes heterolytic fission assisted by FeCl3 to yield FeCl4^- and Cl^+.

The Cl^+ electrophile now attacks the benzene ring to yield chlorobenzene.

why do people who do a lot of physical work need more carbohydrate?

Answers

Answer:

A person doing physical work needs lots of good carbohydrates to keep their energy levels up and proteins to repair a muscle that might get wear and tear from overexertion. Carbohydrate will help the person work for more extended periods.

Define mass number of an atom.​

Answers

the mass number of an atom is basically the total number of protons and neutrons.

c. rubidium sulfate
2. Write balanced molecular equation, complete ionic equation, and net ionic
equations for the mixing of the following solutions. Show states. If no reaction
occurs, show the ionic equation. (8 marks)
a.
NaNO3 +
Ag2SO4 → AgNO3 + Na2SO4

Answers

I can do that which is B


Increasing the thermal energy of a solution means you are __ it and increasing the __energy.

Answers

Answer:

heating, thermal

Explanation:

the more molecules present, the greater amount from any given source increases the temperature as well as the thermal energy.

In a classroom, students who are biochemistry majors are learning about the overall organization of biological membranes. However, one of the students finds a WRONG explanation about the fluid mosaic model from a website and bring it up in a discussion. Which of the following is a WRONG explanation?

a. An explanation of the two-dimensional solutions of oriented lipids and globular proteins.
b. The lipid bilayer is a solvent for integral membrane proteins.
c. All membrane proteins diffuse laterally and freely in the lipid matrix.
d. None of the answers is correct.
e. The lipid bilayer is a permeability barrier for integral membrane proteins.

Answers

Answer:

e. The lipid bilayer is a permeability barrier for integral membrane proteins.

Explanation:

Integral membrane proteins enter the lipid bilayer by translocon channel which gives nascent polypeptide segment a chance to partition itself into lipid bilayer hydrophobic core.

Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass

Answers

Answer:

i think 1. law of muliple proportion

Explanation:

please like

What Is The Name For CH3(CH2)4CH3

Answers

Answer:

hexane

I hope it's helps you

what is the mass of insoluble calcium phosphate produced from .555 grams of calcium chloride​

Answers

Answer:

0.518 g

Explanation:

Step 1: Write the balanced equation

3 CaCl₂ + 2 H₃PO₄ ⇒ Ca₃(PO₄)₂ + 6 HCl

Step 2: Calculate the moles corresponding to 0.555 g of CaCl₂

The molar mass of CaCl₂ is 110.98 g/mol.

0.555 g × 1 mol/110.98 g = 5.00 × 10⁻³ mol

Step 3: Calculate the moles of Ca₃(PO₄)₂ produced

5.00 × 10⁻³ mol CaCl₂ × 1 mol Ca₃(PO₄)₂/3 mol CaCl₂ = 1.67 × 10⁻³ mol Ca₃(PO₄)₂

Step 4: Calculate the mass corresponding to 1.67 × 10⁻³ moles of Ca₃(PO₄)₂

The molar mass of Ca₃(PO₄)₂ is 310.18 g/mol.

1.67 × 10⁻³ mol × 310.18 g/mol = 0.518 g

Which is a property of all bases?

Answers

Answer: The property of all bases is that they are substances which neutralizes an acid to form a salt and water only.

Explanation:

A base is also s substance that can accept or combine with a proton; a proton acceptor.

Bases include the oxides, hydroxides and carbonates of metals. These include MgO,Na2O, NaOH,Ca(OH)2. Most metals burn in oxygen to form metallic oxides which are basic. Examples are the MgO and Na2O.

Other properties or characteristics of bases includes:

--> They have a bitter taste.

--> They turn red litmus paper blue.

--> They are soapy to touch.

--> Aqueous solutions of bases are also electrolytes. Bases can be either strong or weak, just as acids can.

Bases (sodium hydroxide) can be used in the preparation of soaps, glass, paper and rayon. While some bases (magnesium hydroxide) can also be used to manufacture toothpaste and laxatives.

Other Questions
Pasagot po kasi d kopo alam A7. Charlie sells wristbands to earn extra money. She charges $7 per wristband for material and $2.00 per hour to makeunique gifts. How much would two wristbands cost together if one takes her an hour and a half to make one and twohours to make the other one?1. 25.What effect did the passage of the Jones Act have on the Philippines?A. It granted full independence and self government to the Philippines.B. It promised that the Philippines would ultimately gain its independence.C. It awarded statehood to the Philippines.D. It liberated the Philippines from Japanese occupation. What did states fear that made the Articles of Confederation so important? Estimate the value of \frac{\sqrt{2\pi }}{\sqrt{5}} Which method of waste treatment is LEAST harmful to the environment? In Pennsylvania nearly the entire pre-Revolutionary elite opposed the American independence movement. Question 13 options: True False Which point is on the line y=-2x+ 3? (-2, -1) ( 3, -3) (3, 3)(-3, -9)please give how you got your answer Read and choose the correct option to complete the sentence.________ es un desastre natural. Un incendio en la cocina de casa Una falta de electricidad en mi edificio Un maremoto en el sur del pas Una cascada en el ro Recall how the sorceress's twinbrother converts blueberries byadding 9 to the number ofblueberries given to him and thendoubling it. Find the output if he isgiven zero blueberries.The wizard returns blueberries. Pls help ASAP!!!!!Find the average rate of change from d=4to d=11 for the function f(d) = 5(1.02)^d. Describe the process and steps he used and explain what the average rate of change represents. Please help help please Would you kindly help me.Im having a hard time understanding and I've been crying a lot trying to understand it differentiate between unskilled and semi-skilled hum- an resources ? What is the slope of the line? What is the y-intercept of the line? y = 2x + 5 A human cell with an unknown type has 23 chromosomes. Which of the following types of cells can the unknown be?Skin cellSperm cellCardiac cellIntestinal cell Anyone know this question? I need with this question please HELPPPPPPPP i accidentally pressed on c Which statement explains why the Twenty-Fifth Amendment was created? A: After John F. Kennedy was assassinated in 1963, it was clear that a succession plan was needed. B: Before the Twenty-Fifth Amendment, the nation would be left without a leader should something happen to the president. C: Congress didnt want the Speaker of the House to be next in line for the presidency. D: There were already procedures for succession in place, but the procedures simply werent codified.