Answer;
P4O10 - molecular solid
Graphite - network solid
Ammonium phosphate - ionic
Brass - metallic
SiC - network solid
Rb- metallic
I2 - molecular
LiBr- ionic
P4 - molecular
Plastic - amorphous
Si - network
Explanation:
An ionic solid is consists of a combination of two oppositely charged ions to yield a crystal lattice such as LiBr.
A covalent solid is one in whom the atoms of the molecule are held together by covalent bonds e.g I2.
Metals are held together by interaction of metal ions and a sea of electrons. This is called the metallic bond. Like SiC
A network solid consists of covalently bonded atoms held together by strong covalent bonds and the molecules in the solid state are held together by a continuous network of atoms.
Help me please guys
Answer:
D. 2
Explanation:
On the right side of the equation:
Al has 1, Zn has 3, NO3 has 6
But on the left side:
Al has 1, Zn has 1, NO3 has 3
1. So, if we add a coefficient of 2 to Al(NO3)3, then NO3 now has 6-which is what it needs.
2. But now the Al on the right side of the equation is not balanced, so give it a coefficient of 2.
3. To make the Zn balance, just add a coefficient of 3 on the left side of the equation.
Which leaves us with:
2Al + 3Zn(NO3)2 --> 2Al(NO3)3 + 3Zn
And now there are the same number of each compound on both sides of the equation.
Good luck! If you have any questions on this answer leave a comment :)
Which statement correctly describes a product of a reaction within
photosynthesis?
O A. ATP is produced during the light reactions.
O B. Carbon dioxide is produced during the light reactions.
O C. Oxygen is produced during the Calvin cycle.
OD. NADPH is produced during the Calvin cycle.
Answer:
B
pls correct me if im wrong
The first excited state of a particular atom in a gas is 6.1 eV above the ground state. A moving electron collides with one of these atoms, and excites the atom to its first excited state. Immediately after the collision the kinetic energy of the electron is 3.2 eV. What was the kinetic energy of the electron just before the collision
Answer:
The kinetic energy of the electron just before the collision is 9.3 eV.
Explanation:
We can find the kinetic energy of the electron before the collision can be found by energy conservation:
[tex] E_{i} = E_{f} [/tex]
[tex] K_{a_{i}} + K_{e_{i}} = K_{a_{f}} + K_{e_{f}} [/tex] (1)
Where:
[tex]K_{a_{i}}[/tex]: is the initial kinetic energy of the atom
[tex]K_{a_{f}}[/tex]: is the final kinetic energy of the atom = 6.1 eV + [tex]K_{a_{i}}[/tex]
[tex]K_{e_{i}}[/tex]: is the initial kinetic energy of the electron =?
[tex]K_{e_{f}}[/tex]: is the final kinetic energy of the electron = 3.2 eV
By solving equation (1) for [tex]K_{e_{i}}[/tex] we have:
[tex]K_{a_{i}} + K_{e_{i}} = (6.1 eV + K_{a_{i}}) + 3.2 eV[/tex]
[tex] K_{e_{i}} = 6.1 eV + 3.2 eV = 9.3 eV [/tex]
Therefore, the kinetic energy of the electron just before the collision is 9.3 eV.
I hope it helps you!
In the periodic table, identify the element X on its average atomic mass
Answer:
Potassium
Explanation:
To solve this question we need to find, as first, the average atomic mass of the element knowing that is defined as the sum of the masses of each isotope times their abundances. For the element X:
Average atomic mass:
38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031
= 39.02g/mol
The atom that has the average atomic mass closest to 39.02g/mol is Potassium, K = 39.10g/mol.
b.__________________ Properties of elements repeat in a regular way as the atomic numbers increase.
A 4.369 g sample of metal is placed in a flask. Water is added to the flask and the total volume in the flask is read to be 126.4 ml. The mass of the water, flask, and metal is 268.5 g. If the mass of the flask is 139.3 g and the density of water is 1.000 g/mL, the density of the solid is ________ g/cm3.
Answer:
Density of the solid=[tex]2.78 g/cm^3[/tex]
Explanation:
We are given that
Mass of sample of metal=4.369 g
Volume in the flask, V=126.4 ml
Mass of water, flask, and metal=268.5 g
Mass of flask=139.3 g
Density of water=1.000 g/mL
We have to find the density of the solid.
Mass of water=268.5-4.369-139.3=124.831 g
Volume of water=[tex]\frac{Mass\;of\;water}{density\;of\;water}[/tex]
Volume of water=[tex]\frac{124.831}{1}=124.831 mL[/tex]
Volume of solid=126.4 ml-124.831 mL
=1.569mL
Now,
Density of the solid=[tex]\frac{mass\;of\;solid}{volume\;of\;solid}[/tex]
=[tex]\frac{4.369}{1.569}[/tex]
[tex]=2.78g/mL[/tex]
1mL=1 cubic cm
Therefore,
Density of the solid=[tex]2.78 g/cm^3[/tex]
The true value was 0.120. What was your percent error?
The question is incomplete as the measured value isn't given. However, an hypothesized measured value will be used to explain how to calculate the percentage error.
Answer:
2.5%
Explanation:
Percentage error :
[(measured value - True value)/ True value] * 100%
The measured value is the value obtained during an while using a measuring device.
If the measured value is = 0.123
Then, the percent error will be :
[(0.123 - 0.120) / 0.120] * 100%
(0.003 / 0.120) * 100%
0.025 * 100%
= 2.5%
The percent error is 2.5%. When the true value was 0.120.
Percent error is a measurement used to quantify the discrepancy between an estimated or experimental value and a known or accepted value.
Given information:
The measured value is 0.123
The true value is 0.120
Calculate the percent error using the formula given as below:
Percent Error = (|True Value - Measured Value| / True Value) * 100%
Substituting the given values in the above equation:
Percent Error = (|0.120 - 0.123| / 0.120) × 100%
= (0.003 / 0.120) × 100%
= 0.025 × 100%
= 2.5%
Therefore, the percent error is 2.5%.
To learn more about the percent error, follow the link:
https://brainly.com/question/3105259
#SPJ6
Your question is incomplete, the complete question was:
The true value was 0.120 and the measured value is 0.123. What was your percent error?
CaCl2 is a(n)
A. None of these
B. Metallic compound
C. Covalent compound
D. Ionic compound
Answer:
A
Explanation:
becuase CaCI2 Is an inorganic compound
Calculate the average atomic mass for element X
Answer:
51.6058
Explanation:
The percentage of abundance is changed to decimal by dividing 100
What is a substance that decreases the rate of a chemical reaction called? (5 points)
What is a substance that decreases the rate of a chemical reaction called? (5 points)
Catalyst
Inhibitor
Product
Reactant
Answer:
inhibitor :)
Explanation:
Catalysts speed the reaction up, and the other 2 are essential for the reaction to work, so an inhibitor :)
Answer:
Inhibitor
Explanation:
A student makes several observations about a piece of iron. Which observation describes a chemical property of the iron?
Answer:
An example of a chemical property of iron would be that it is capable of combining with oxygen to form iron oxide, or rust.
Explanation:
You have no choice listed, so I provided an example.
Diamond is an allotrope of :
a. carbon b. sillica
c. phosphorus c. Nitrogen
Answer:
carbon
Explanation:
because it is an allotrope of carbon
Answer:
Carbon
Explanation:
its literaly carbon
every action produces an equal and opposite -- ---------- when one object exterts a force on another object,the second object pushes back with the same amount of---------
someone knows the answer
.
Unlike a theory, a scientific law describes an observed pattern without attempting to _____ it.
explain
prove
test
verify
1) The percentage of oxygen in dry air is _______
A. 0.1
B. 1.0
C. 21
D. 79
2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?
A. Oxygen
B. Carbon dioxide
C. Ammonia
D. Nitrogen
Answer:
1) The percentage of oxygen in dry air is _______
C. 21
2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?
B. CARBON DIOXIDE
Hope it helps
have a nice day
Answer: The percentage of oxygen in dry air is . 21
Explanation: Ammonia gases was present in large amounts in the easth7s earliest atmosphere
Hope it will help you
Cuál o cuáles de las siguientes características son correctas para la mayoría de los compuestos del carbono?
I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc.
II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos
III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos
IV) El enlace covalente es característico de los compuestos del carbono
Todas son correctas
II
I y IV
I, III y IV
Answer:
Todas son correctas
Explanation:
I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc. VERDADERO. La mayoría de los compuestos de carbono son apolares, y basados en la regla: Similar disuelve similar, podemos presumir que la mayoría de compuestos de carbono se disuelven en solventes no polares.
II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos. VERDADERO. Al ser sustancias apolares, sus fuerzas electrostáticas son bajas. De la misma manera, como su masa atómica es pequeña, las fuerzas de Van der Waals son despreciables haciendo que sus puntos de fusión y ebullición sean bajos respecto a sustancias de estrucutra similar.
III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos. VERDADERO. Los gases (Como el gas natural) son combustibles usados para cocina. Los líquidos (Como la gasolina) son combustibles y bastante inflamables. Los sólidos (Como la madera) se usan como combustibles para hacer asados o son el combustible en incendios forestales.
IV) El enlace covalente es característico de los compuestos del carbono. VERDADERO. La polaridad del carbono es neutral haciendo que la mayoría de los enlaces que forma sean covalentes.
Todas son correctas
How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?
Hi there!
[tex]\large\boxed{3.203 * 10^{22} atoms}[/tex]
We can use the following conversions to solve:
Total mass --> amount of mols --> amount of atoms (Avogadro's number)
Begin by calculating the amount of boron trifluoride in 3.61 grams:
3.61 g * (1 mol BF₃ / 67.8 g) ≈ 0.0532 mol BF₃
Use avogadro's number to convert:
0.0532 mol * 6.02× 10²³atoms / 1 mol = 3.203 × 10²² atoms
PLS HELP!!
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Answer:
See explanation
Explanation:
An electrolytic cell functions by a non spontaneous chemical process. Energy is supplied in the form of electricity through a battery to drive the electrochemical process.
A voltaic cell functions by a spontaneous chemical process. Energy or work can be derived from a voltaic cell.
When iron is rusting, a natural voltaic cell is set and the iron is converted to hydrated iron III hydroxide. The set up used for the extraction of sodium metal from brine functions on the basis of electrolysis.
CAN SOMEONE PLEASE ANSWER THIS PAGE ILL GIVE YOU ALL MY POINTS
Answer: the equation for the reaction is NH4Cl (s) --> NH3 (g) + HCl (g)
equation for heat reaction:
ΔH25° = (ΔH25° NH3 + ΔH25° HCl) - ΔH25° NH4Cl)
question 2:
the 1st and 3rd reactions are better ontained through refrence sources and the 2nd and 4th are the easiest and safest to measure in the laboratory. The 1st and rd reaction contains noxious gases this is because there is a (g) in both of the reactions. And the 2nd and 4th does NOT contain noxious gases so i assume its the safest to measure out in the lab
A new drug has been released to the public and is popular among
consumers. It is effective in relieving high blood pressure. However, it has
altered some patients' personalities. Which stage of the engineering process
may address this negative side effect?
A. Screening
B. Testing
C. Looking for improvements
D. Evaluating test results
Answer:
c. Looking for improvements
Explanation:
I took the quiz and it was right
Answer: C
Explanation:
just took the test
define hydroscopy in chemistry
Answer: A hygroscopic substance is one that readily attracts water from its surroundings, through either absorption or adsorption
Explanation:
which among the following pairs are not isotopes?
A solar energy company learns of several recent cyber-attacks targeting other companies in their industry and realizes they could be next. The company initiates an analysis to weigh the measures needed to counter the potential threat and minimizing the impact to their business in case those are exploited. Which security principle is illustrated in this example?
40 POINTS! WILL MARK BRAINLIEST!! Determine the mass in grams of 4.83 × 10²¹ atoms of arsenic. (The mass of one mole of arsenic is 74.92 g.)
Answer:
[tex]\boxed {\boxed {\sf 0.601 \ g \ As}}[/tex]
Explanation:
We want to convert atoms of arsenic to mass in grams. We have to complete 3 steps.
1. Convert Atoms to MolesThe first step is converting atoms to moles. We use Avogadro's Number for this. This number is 6.022*10²³ and it is the number of representative units (molecules, atoms, etc.) in 1 mole of a substance. In this problem, the particles are atoms of arsenic. So, 1 mole of arsenic contains 6.022*10²³ atoms of arsenic. Use this information to make a ratio.
[tex]\frac{1 \ mol \ As}{{6.022*10^{23} \ atoms \ As} }[/tex]
Multiply by the number of atoms provided in the problem: 4.83 × 10²¹
[tex]4.83 *10^{21} \ atoms \ As *\frac{1 \ mol \ As}{{6.022*10^{23} \ atoms \ As} }[/tex]
The units of atoms of arsenic (atoms As) cancel.
[tex]4.83 *10^{21} *\frac{1 \ mol \ As}{{6.022*10^{23}} }[/tex]
Condense into 1 fraction.
[tex]\frac{4.83 *10^{21} }{{6.022*10^{23}} } \ mol \ As[/tex]
[tex]0.008020591166 \ mol \ As[/tex]
2. Convert Moles to GramsThe next step is converting moles to grams. We use the molar mass for this, which is provided. There are 74.92 grams of arsenic in 1 mole of arsenic, so we can make another ratio.
[tex]\frac {74.92 \ g\ As}{ 1 \ mol \ As}[/tex]
Multiply by the number of moles we calculated.
[tex]0.008020591166 \ mol \ As*\frac {74.92 \ g\ As}{ 1 \ mol \ As}[/tex]
The units of moles of arsenic (mol As) cancel.
[tex]0.008020591166 *\frac {74.92 \ g\ As}{ 1}[/tex]
[tex]0.6009026901 \ g \ As[/tex]
3. RoundThe original measurement of atoms (4.83 × 10²¹ ) has 3 significant figures, so our answer must have the same.
For the number we calculated, that is the thousandth place. The 9 in the ten-thousandth place (0.6009026901) tells us to round the 0 to a 1.
[tex]0.601 \ g \ As[/tex]
There are approximately 0.601 grams of arsenic.
Hello, if any of y'all don't mind, can one of you answer these 5 questions.
Answer:
4.. increases
5..lowers
6.. increases
7.. increases
8.. speed
Answer:
When a substance is heated, its temperature rises because its molecules move faster and gain thermal energy. Temperature measures the "hotness" or "coldness" of an object. The term heat refers to thermal energy being transferred from a hotter system to a cooler one.
how to make a sponge
Answer:
Synthetic sponges are made of three basic ingredients: cellulose derived from wood pulp, sodium sulphate, and hemp fiber. Other materials needed are chemical softeners, which break the cellulose down into the proper consistency, bleach, and dye.
Explanation:
IDK, BUT HOPE IT HELPS?
Lead is a toxic metal that affects the central nervous system. A Pb-contaminated water sample contains 0.0012 % Pb by mass. What volume of the water in milliliters contains 100 mg of Pb
Answer:
8.3 × 10³ mL
Explanation:
Step 1: Calculate the mass of water that contains 100 mg of Pb
The concentration of Pb in the sample is 0.0012% by mass, that is, there are 0.0012 g of Pb every 100 g of water. The mass of water that contains 100 mg (0.100 g) of Pb is:
0.100 g Pb × 100 g Water/0.0012 g Pb = 8.3 × 10³ g Water
Step 2: Calculate the volume corresponding to 8.3 × 10³ g of water
Since the solution is diluted, we will assume the density of the sample is equal than the density of water (1 g/mL).
8.3 × 10³ g × 1 mL/1 g = 8.3 × 10³ mL
The volume of the water in milliliters contains 100 mg of Pb is;
V = 8.3 × 10³ mL
Volume of SolutionWe are given the concentration of Pb in the sample as 0.0012% by mass.
That means that there are 0.0012 g of Pb in every 100 g of water.
Thus, the mass of water that contains 100 mg (0.100 g) of Pb is calculated as;
(0.100 g Pb × 100 g of Water)/0.0012 g of Pb = 8.3 × 10³ g of Water
Now, we know that the density of water (1 g/mL) but we are not given the density of the sample.
Thus, since the solution is diluted we can equally say that;
Density of sample = 1 g/mL
Formula for Volume is;
V = mass/density
Thus;
V = 8.3 × 10³ g/1 g/mL
V = 8.3 × 10³ mL
Read more about Volume of solution at; https://brainly.com/question/17055828
A sample of substance "B" has a mass of 37.6g contained in a volume of
9.65mL. What is the density of substance "B"? (Report your answer with 3
s.f. E.G.: 6.00g/mL)
Answer:
3.90g/mL
Explanation:
To find the density of a substance, divide the mass by the volume.
So, 37.6 / 9.65 = 3.89637
then round to 3 significant figures
Good luck!
Los 4 números cuánticos del oxígeno
Heat is most closely related to which kind of energy?
O nuclear
electrical
thermal
chemical
Answer:
C thermal
Explanation:
