There are several distinct functions in Microsoft Excel for determining the average of a group of numerical numbers.
Additionally, there is a quick non-formula way. You may find a brief summary of each technique on this page, along with usage examples and best practices. Every function covered in this article is compatible with Excel 365 through Excel 2007.
The formula is as follows for the range of numbers below:
=SUM(B3:B12)/COUNT(B3:B12)
As you can see, the formula's output exactly matches the status bar's average value. If the numbers you wish to calculate the average for are 1, 2,... A single formula can contain up to 255 parameters.
Learn more about output here-
https://brainly.com/question/24179864
#SPJ4
for the battle of surigao strait, for each country engaged in that battle (had one or more battleships participating), give the number of its battleships that were sunk. note: this question is very tricky. in particular, you need to deal with the (historical) case that a country engaged in the battle but did not have any ships sunk.
You must join the tables, and I assume your relationship with the other is indicated by the name of the ship. Attempt this one,
Step-by-step coding:
SELECT a.country,
SUM(CASE WHEN b.result = 'SUNK' THEN 1 ELSE 0 END) totalSunkShips,
SUM(CASE WHEN b.result = 'OK' THEN 1 ELSE 0 END) totalUNSunkShips
FROM battles a
INNER JOIN ships b
ON a.ship = b.name
WHERE b.battleName = 'Surigao Strait'
GROUP BY a.country
What is Table in SQl?
Tables are database objects that hold all of the information in a database.
Tables logically organize data in a row-and-column format similar to spreadsheets.
Each row represents a distinct record, and each column represents a record field.
A table containing employee data for a company, for example, might include a row for each employee and columns containing employee information such as employee number, name, address, job title, and home telephone number.
To learn more about Database, visit: https://brainly.com/question/26096799
#SPJ4
when you are securing your vehicle you should set the parking break before shifting from drive to park.
The proper procedure is to use your primary brakes to bring your automobile to a halt, then to engage your emergency brake, put your car in park, and finally turn off your engine.
Should you brake before shifting?There is just one proper technique for putting your automobile in park. Before shifting into park from any other gear, you should always come to a complete stop.A crucial component known as a parking pawl is engaged when you put your automatic transmission into P.The pawl locks the transmission, preventing it from sending mechanical power to your car's wheels.This locking mechanism can be harmed by changing gears while moving.And if this component breaks, your car might just roll away.In addition, you should always use your parking brake as an additional measure of safety.Please heed our warnings, as transmission repairs are expensive and time-consuming.To learn more about brake, refer to
https://brainly.com/question/8001029
#SPJ4
if the state of stress at a point is given by determien the stress vector and the magnitude of the normal and shear stress acting on the plane.
T=σ(x)n(x), where σ is the stress tensor and n is the outward unit normal to the surface at x, gives the stress vector t operating on a surface at a point x.
What do you mean by stress tensor?
The stress tensor, also known as the Cauchy stress tensor σ, genuine stress tensor, or simply the stress tensor in continuum mechanics, is made up of nine elements σ[tex]_{ij}[/tex] that collectively characterize the state of stress at a point inside a material that is in a deformed condition, location, or configuration. The stress tensor and traction vector have the SI unit, which corresponds to the stress scalar, N/m2. A unit vector has no dimensions.
Continued Answer:
The stress tensor σ and unit normal n are constant for all x on the plane, as you have already noticed. The tension vector t is therefore given by
t=σn= [tex]\left[\begin{array}{ccc}1&1&0\\1&1&1\\0&1&1\end{array}\right] \left[\begin{array}{ccc}\frac{1}{\sqrt{3}} \\ \frac{1}{\sqrt{3}} \\\frac{1}{\sqrt{3}} \end{array}\right] = \left[\begin{array}{ccc}\frac{2}{\sqrt{3}} \\\frac{2}{\sqrt{3}}\\\frac{2}{\sqrt{3}}\end{array}\right][/tex]
Since n has magnitude 1, the component of t that is perpendicular to the plane, c, can be calculated by
[tex]c = (t . n)n = \frac{7}{3}n[/tex]
The angle θ between the stress vector and the plane's normal is finally given by:
θ = [tex]cosx^{-1} (\frac{t . n}{|t| . |n|}) = cos^{-1}(\frac{7/3}{\sqrt{17}/\sqrt{3}})[/tex]
To learn more about stress tensor, use the link given
https://brainly.com/question/29480452
#SPJ4
adits are the machines used to haul mined material in an open-pit mine. the vertical shafts that go deep into a mine to reach to the depth at which ore is found. the entrances to underground mine shafts. piles of mine tailings that are sprayed with acid to release more metal ore.
Adits are the entrances to underground mine shafts.
What is adit in underground mining?An underground mine's horizontal or nearly horizontal entrance, called an adit (from the Latin aditus, "entryway"), allows for the entry, drainage and ventilation of the mine as well as the extraction of minerals at the lowest practical level. Adits are also utilised for mineral vein exploration.A horizontal or nearly horizontal route dug from the surface of the Earth through the face of a mountain or ridge for the purpose of operating, ventilating, or draining a mine. adit. Mining drift is a related topic.A horizontal or nearly horizontal passageway that connects to a larger underground excavation for ventilation, water removal, or an additional entrance is known as an adit. The small tunnels provide access to the main shaft at key locations during both mining and tunnelling operations.Learn more about underground mining refer to :
https://brainly.com/question/10401629
#SPJ4
how many drive shaft rotations are required to complet one thermodynamic cycle of a 4 stroke diesel engine
A 4-stroke engine always takes two crankshaft rotations to fire all the cylinders once each.
What is thermodynamic cycle?Any closed system that experiences changes in temperature, pressure, or volume while maintaining an equilibrium between its initial and final states is said to be in a thermodynamic cycle. Based on the assumptions of the absence of incidental wasteful processes, such as friction, and the assumption of no conduction of heat between different parts of the engine at different temperatures, the Carnot cycle has the highest efficiency possible for an engine (although other cycles have the same efficiency).Any closed system that experiences changes in temperature, pressure, or volume while maintaining an equilibrium between its initial and final states is said to be in a thermodynamic cycle.Hence,The complete question is,
How many drive shaft rotations are required to complete one thermodynamic cycle of a 4 stroke diesel engine?
To learn more about thermodynamic cycle refer to:
https://brainly.com/question/24261852
#SPJ4
What can you determine about the feasibility of a reaction if the enthalpy is positive and the entropy is negative?.
The right answer is B. The reaction will never be possible since the Gibbs energy will always be positive.
Gibbs free energy, G, enthalpy, H, and entropy, S are related as follows:
ΔG = ΔH - TΔS
We will always have a positive value for the Gibbs free energy if enthalpy is positive and entropy is negative.
This means that choice B is the best one. A reaction will always be possible if it is exothermic (H is negative), has a positive entropy change (S is positive), and G is always negative. The sign of G determines whether a response (or other physical change) is possible. The reaction cannot take place if G is positive.
The complete question is- What can you determine about the feasibility of a reaction if the enthalpy is positive and the entropy is positive?
A. The Gibbs energy will always be positive, and the reaction will never be feasible.
B. The Gibbs energy will always be negative, and the reaction will always be feasible.
OC. The reaction could be feasible above a certain temperature.
D. The reaction will usually occur because it is unlikely the entropy will be greater than the enthalpy.
Reset Selection
Learn more about choice here-
https://brainly.com/question/27960768
#SPJ4
In sheet metal fabrication, minimum bending radius for AA 6061-0 is: 1) o 2) independent of thickness 3) same for AISI 1008 of equivalent hardness 4) likely to cause cracks inside the bend 5) independent of rolling direction Question 32 (1 point) Cold forming of metals is done at: 1) T/Tm above 0.6 2) above cryogenic temperatures 3) T/Tm just below 0.3 4) exact 120 degree F for aluminum alloys 5) between 0.3 and 0.6 for super and nickel-based alloys Question 33 (1 point) By agreement, sheet metals are defined as such: 1) when one dimension is less than 2.5 mm, and much smaller the other two 2) thin plates are thicker than 2.5 in. 3) less than 5 in. thick plates 4) produced by continuous profile rolling 5) formed in compound dies
For all sheet metal parts, an usual suggestion is 1t, which states that the smallest bend radius must be at least equal to the sheet thickness.
One of the most frequent processes used to generate flanges, curves, seams, etc. in the manufacturing of sheet metal is to bend sheets according to a certain bend radius. In addition, bending gives sheet metal far more strength than its flat equivalents.
An aluminum sheet bent into a V shape, for instance, will be significantly stiffer and stronger than the same flat sheet.
Usually, there are a number of calculations and design specifications involved in bending a metal sheet. If the bend's outside edge is larger than the minimum bend radius, which is commonly defined in terms of the metal sheet thickness (t), such as 1t, 2t, or 3t, the bend's outer edge will crack.
For all sheet metal parts, a usual suggestion is 1t, which states that the smallest bend radius must be at least equal to the sheet thickness. For instance, the minimum bend radius should be 1t, or 2mm, if the sheet is 2mm thick.
To know more about sheet metal click here:
https://brainly.com/question/6763446
#SPJ4
this project requires one cpp file submission. do not upload a code snippet, the only files you submit for the code should be the source files. do not submit any zip or compressed files, binary files, or any other generated files. do not put the code inside the pdf file. submission of unnecessary files or binary files in addition to source files will make you lose the points of the assignment.
Go to the course's Assignments page and select Create Assignment in the bottom right corner of the screen to create a programming assignment.
Go to the Assignments page for the course, and then click Create Assignment in the bottom right corner of the screen to start creating a programming assignment. Out of the available assignment kinds, pick "Programming Assignment."
Programming assignments on Gradescope accept numerous files of any file type, including files of various types. Additionally, GitHub and Bitbucket integration allows students to submit to Gradescope. The code can then be automatically graded, manually graded using a rubric and in-line comments, or graded using both autograding and human grading.
Your ability to set up any language, compiler, library, or other dependencies you require using our autograder platform is unrestricted.
To know more about programming assignment click here:
https://brainly.com/question/25875756
#SPJ4
8.19 lab*: program: soccer team roster (dictionaries) this program will store roster and rating information for a soccer team. coaches rate players during tryouts to ensure a balanced team. (1) prompt the user to input five pairs of numbers: a player's jersey number (0 - 99) and the player's rating (1 - 9). store the jersey numbers and the ratings in a dictionary. output the dictionary's elements with the jersey numbers in ascending order (i.e., output the roster from smallest to largest jersey number). hint: dictionary keys can be stored in a sorted list. (3 pts) ex: enter player 1's jersey number: 84 enter player 1's rating: 7 enter player 2's jersey number: 23 enter player 2's rating: 4 enter player 3's jersey number: 4 enter player 3's rating: 5 enter player 4's jersey number: 30 enter player 4's rating: 2 enter player 5's jersey number: 66 enter player 5's rating: 9 roster jersey number: 4, rating: 5 jersey number: 23, rating: 4 jersey number 30, rating: 2 ...
Python script to create a soccer team roster (dictionaries) Roster and rating data for a soccer team will be saved by this software. To establish a balanced squad, coaches evaluate athletes during tryouts.
pdict={}#dictionary
for i in range(1,6):#Written in Python script.
print("Enter player "+str(i)+"'s jersey number:")
key=int(input())
print("Enter player "+str(i)+"'s rating:")
value=int(input())
pdict[key]=value
print("Roster")
for i in sorted(pdict):#printing the values in dictionary
print("Jersey number: "+str(i)+", Rating: "+str(pdict[i]))
while(1):#menu
print("a-Add player")
print("d-Remove player")
print("u-Update player rating")
print("r-Output players above a rating")
print("o-Output roster")
print("q-Quit")
print("\nChoose an option:")
n=input()#loop control variable
if(n=="o"):#output the roster
print("Roster")
for i in sorted(pdict):
print("Jersey number: "+str(i)+", Rating: "+str(pdict[i]))
elif(n=="a"):#adds a new player
print("Enter a new player's jersey number:")
key=int(input())
print("Enter the player's rating:")
value=int(input())
pdict[key]=value
elif(n=="d"):#delete a player
print("Enter a jersey number:")
key=int(input())
pdict.pop(key)
elif(n=="u"):#updates a player's rating
Print("Enter a jersey number:")
key=int(input())
print("Enter a new rating for player:")
value=int(input())
pdict[key]=value
elif(n=="r"):#prints ratings above a particular value
print("Enter a rating:")
rating=int(input())
print("Above "+str(rating))
for i in sorted(pdict.items(),key=lambda x:x[1],reverse=True):
if(i[1]>rating):
print("Jersey number: "+str(i[0])+", Rating: "+str(i[1]))
else:#exits the program
exit(0)
Learn more about Python script here:
https://brainly.com/question/14532970
#SPJ4
below are two variations of the needham-schroeder algorithm. for each variation, state whether the protocol is secure; if it is, present an argument why it is so, if it is not, demonstrate an attack. (note: exclude from consideration attacks that assume eve is able to get the session
As a result, A transmits I her nonce that has been encrypted using I's public key. I contacts B and sends the nonce of A that has been encrypted using B's public key after decrypting the message using their private key.
The fact that I actually sent this mail is unknown to B. With their own nonce, B replies and uses A's public key to encrypt the message. Since I don't have access to A's private key, they must transmit the message to A without knowing what is inside. A responds with the nonce of B encrypted with the public key of I after decrypting the message with her private key.
Learn more about encrypted here-
https://brainly.com/question/17017885
#SPJ4
The elements of a deque are stored in a. choices contiguous memory b. non-contiguous memory
c. a combination of contiguous and non-contiguous memory
A deque's components are kept in contiguous memory.
Deque
Deque, or a double-ended queue, is a queue in which elements can be added to or removed from it from either the front or the back.
Contiguous memory
A process or file that requires memory is given a single contiguous piece or part of memory using the contiguous memory allocation technique. The main memory is made up of two main sections: one for the operating system and the other for user programs. As a result, all of the available memory space is located in one location, meaning that the freely/unused available memory partitions are not dispersed randomly throughout the entire memory space. By partitioning the memory partitions into fixed size partitions, contiguous memory allocation can be implemented or achieved.
To know more about queue, check out:
https://brainly.com/question/13143460
#SPJ4
Which of the following statements about design is TRUE?a. The best designs are the result of a singular creative genius.b. The goal of any designer is the find the single best solution.c. Designs must satisfy many objectives.
The objective of any designer is to identify the solitary best solution, according to the truth about design.
Which step of the design process happens first?User-centric research is the primary emphasis of the design thinking process' initial phase. You should develop an empathic grasp of the issue you are attempting to resolve.Graphs should be identified and referred to as figures. All numbers for formal reports should be included in Appendix B at the conclusion of your document. Figures for memos may be either incorporated within the main text of the message or added as separate pages. Figure 1, Figure 2, etc. should be used to consecutively number the figures.To learn more about Design refer to:
https://brainly.com/question/5971614
#SPJ4
A uniform rod having a weight of 10 lb is pin supported at A from a roller which rides on a horizontal track. If the rod is originally at rest, and a horizontal force of F = 15 lb is applied to the roller, determine the acceleration of the roller. Neglect the mass of the roller and its size d in the computations. (ans: aA = 193 ft/s2)
Neglect the mass of the roller and its size d in the computations, the acceleration of the roller, [tex]a_A[/tex] = 193 ft/s². (True)
What is acceleration?Acceleration is a vector quantity because it has both magnitude and direction. It is also the second derivative of position with respect to time or the first derivative of velocity with respect to time.
When the velocity of an object changes, it is said to be accelerated. The velocity of an object can change due to an increase or decrease in speed or a change in direction of motion.
A few examples of acceleration include an apple falling to the ground, the moon orbiting the earth, and a car stopped at a traffic light. Through these examples, we can see that acceleration occurs when the direction of a moving object changes or when its speed increases or decreases.
Learn more about acceleration
https://brainly.com/question/460763
#SPJ4
match the word to its definition or symbol. 1. element 2.{ } empty set 3. finite set 4.{whole numbers} infinite set 5. null set 6.a set limited by definition not an element 7. subset
Below is a pair of meanings and symbols along with their explanations
In set theory, the following definition are present;1. Element -an item in a set, where a set is a collection of things that have something in common. The symbol for set is { 1,2,} denoted by S
2. Infinite set -is a set that is not a finite set and can be countable or uncountable. For example, a set of all integers {---,-1,0,1,2,3,...} is a countably infinite set.
3. A finite set is one that has a finite number of elements in that you could count and finish counting.In finite set there is an bijection between set X and the finite whole numbers. For example; N_n={1,2,3...,n}
4. Whole numbers are positive numbers that includes zero with no fractions or decimals.For example the set of whole numbers {0,1,2,3,4,5,...}
5/7. Empty set- a set that has no elements in called an empty set represented by the symbol { }. It is also called a null set. For example, if you were to find a set of all senior citizens who are less than 5 years old. There are no senior citizens under five years old.Such a set has no elements thus it is a null set.
6. Subset- is a set made up of components of another set.A set A is a subset of another set B if all elements of set A are elements of set B. This means set A is contained inside set B. i.e A⊂B
Learn More about Set theory : brainly.com/question/6948738
#SPJ4
A conditioned reinforcer that as a result of having been paired w/ many unconditioned & conditioned reinforcers does not depend on a current EO for any particular form of reinforcement for its effectiveness
Generalized Conditioned Reinforcer is a conditioned reinforcer that as a result of having been paired with many unconditioned & conditioned reinforcers does not depend on a current EO for any particular form of reinforcement for its effectiveness.
What is conditioned reinforcer?Previously neutral stimuli are called conditioned reinforcers. The primary reinforcer's associated reinforcement properties are acquired by the neutral stimulus when it is paired with one.
Money is a reinforcer under conditioning. The paper currency itself is not a reinforcing factor. On the other hand, you can buy basic reinforcers like food, water, and shelter with the paper money. By combining the paper bills with the purchase of food, water, and shelter, the bills end up acting as reinforcers.
As a result of the consequences that follow a behavior, an action (operant response) may occasionally be more likely to occur in the future. Reinforcers are things that make it more likely for a behavior to happen again in the future.
Learn more about conditioned reinforcer
https://brainly.com/question/29428294
#SPJ4
Create Pipe. c class THis is c language programming!(1) main() function must1. create two pipes and make them global.2. create two child processes. Each child process will call one of the functions defined in (2) and (3) below.3. wait() for a child process to end. Then, send the SIGUSR1 signal to the (2) process before ending.(2) One function should have an integer variable that starts at 0. It should print ping: {value} then increment the value. It should write that value to a pipe and read the value back from the other pipe until the value is greater than or equal to 100. It should call exit() when complete.(3) The other function should set up a signal handler for SIGUSR1 to call a function (defined in (4) below) when it receives that signal. It should then loop forever: read from a pipe, print pong-{value}, increment the value and write the value to the other pipe. These pipes must be opposite from the function in (2): the pipe you write to in (2) must be the pipe that you read from in (3) and vice versa.(4) Create a function for the signal handler that should print pong quittingand then exit().
Put together Pipe. The two pipes are created using c program language , and they are made global.
// Using the fork() and pipe functions in a C program
#include<stdio.h>
#include<stdlib.h>
#include<unistd.h>
#include<sys/types.h>
#include<string.h>
#include<sys/wait.h>
int main()
{
int fd1[2];
int fd2[2];
char fixed_str[] = "example.org";
char input_str[100];
pid_t p;
if (pipe(fd1)==-1)
{
fprintf(stderr, "Pipe Failed" );
return 1;
}
if (pipe(fd2)==-1)
{
fprintf(stderr, "Pipe Failed" );
return 1;
}
scanf("%s", input_str);
p = fork();
if (p < 0)
{
fprintf(stderr, "fork Failed" );
return 1;
}
// Parent process
else if (p > 0)
{
char concat_str[100];
close(fd1[0]);
write(fd1[1], input_str, strlen(input_str)+1);
close(fd1[1]);
wait(NULL);
close(fd2[1]);ipe
read(fd2[0], concat_str, 100)
printf("Concatenated string %s\n", concat_str);
close(fd2[0]);
}
else
{
close(fd1[1]); // Close writing end of first pipe
char concat_str[100];
read(fd1[0], concat_str, 100);
int k = strlen(concat_str);
int i;
for (i=0; i<strlen(fixed_str); i++)
concat_str[k++] = fixed_str[i];s
close(fd1[0]);
close(fd2[0]);
write(fd2[1], concat_str, strlen(concat_str)+1);
close(fd2[1]);
exit(0);
}
}
Learn more about C program here:
https://brainly.com/question/7344518
#SPJ4
an air-standard dual cycle has a compression ratio of 1.4 and a cutoff ratio of 1.2. the pressure ratio during the constant-volume heat addition process is 1.5. determine the thermal
The thermal efficiency is determined from the heat output using the energy balance in 4-1 and expressing the temperature at state 4 through the compression and cut-off ratios, therefore the thermal efficiency η = 0.646
What is thermal efficiency?A device that uses thermal energy, such as an internal combustion engine, steam turbine, steam engine, boiler, furnace, refrigerator, or air conditioners, has a performance measure known as thermal efficiency that is dimensionally indeterminate.
Thermal efficiency, also referred to as the coefficient of performance, in the case of a heat pump is the ratio of net heat output (for heating) or net heat removed (for cooling) to the energy input. Thermal efficiency in the case of a heat engine is the ratio of the net work output to the heat input (external work).
Since the output is always less than the input, a heat engine's efficiency is fractional, whereas a heat pump's COP is greater than 1. By applying the Carnot theorem, these values are further constrained.
Learn more about Thermal efficiency
https://brainly.com/question/13148176
#SPJ4
where a grounding electrode conductor or bonding conductor for a radio antenna system is installed in a metal raceway, the contained grounding electrode conductor is not required to be bonded to both ends of the raceway.
Both ends of the raceway shall be bonded to the contained conductor.
Where is the grounding conductor installed?On the supply side of the disconnecting method, a grounding electrode conductor must be attached to one or more of the following, depending on the situation, in a wireway or other accessible enclosure: Equipment grounding conductor(s) attached with the feeder. Grounded service conductor(s). Jumper supply-side bonding.
A conductive object that creates a direct connection to the earth or ground is what a grounding electrode essentially is. The fact that a grounding electrode is in direct touch with ground is crucial. A structure contains many conductive items, but not all of them establish a straight connection to ground.
If exposed to physical harm, a copper or aluminum grounding electrode conductor of 4 AWG or larger must be shielded.
To learn more about grounding conductor refer to:
https://brainly.com/question/14642122
#SPJ4
D 8.64 For a cascode current source such as that in Fig. 8.30, show that if the two transistors are identical, the current I supplied by the current source and the output resistance R. are related by IR, = 2 y.P/\Vov). Now consider the case of transistors that have v.] = 3 V and are operated at |Vorl of 0.15 V. Also, let „Cox = 100 mA/V?. Find the WIL ratios required and the output resistance realized for the two cases: (a) I = 50 u A and (b) I = 200 u A. Assume that Vy for the two devices is the minimum required (i.e., | Vov]).
The W/L ratios required and the output resistance realized for the two cases are:
(a) ) I = 50 u A Ans) W/L = 44.44
(b) I = 200 u A Ans) W/L = 178.77
What is resistance?The amount of resistance in an electrical circuit represents the resistance to current flow.
The Greek letter omega (Ω), which represents resistance, represents ohms. German physicist Georg Simon Ohm (1784–1854), who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm. Ohm's Law was developed under his direction.
To some extent, every material impedes the flow of current. One of two broad categories that they fit into is:
Electrons can easily move through materials called conductors because they offer very little resistance. Copper, gold, silver, and aluminum are some examples.High resistance and restriction of electron flow are characteristics of insulators. Plastic, rubber, glass, paper, and rubber are some examples.Learn more about resistance
https://brainly.com/question/17563681
#SPJ4
Land subsidence is worsened by the cessation of groundwater pumping, because the additional water that is retained underground weakens the rock, making it subside more easily.False
Land subsidence is worsened by the cessation of groundwater pumping, because the additional water that is retained underground weakens the rock, making it subside more easily. (False)
What is land subsidence?Land subsidence happens when a lot of groundwater has been taken out of particular kinds of rocks, like fine-grained sediments. Because water helps to hold the ground up in part, the rock compacts. The rocks collapse when the water is turned off.
Due to the fact that land subsidence can happen over wide areas as opposed to a single small area, like a sinkhole, you might not notice it too much. However, this does not imply that subsidence is not a significant occurrence; over the years, states like California, Texas, and Florida have sustained losses totaling hundreds of millions of dollars.
Learn more about Land subsidence
https://brainly.com/question/20018907
#SPJ4
the control circuit must produce an output of 1 if at least two of the conditions 1,2 and 3 are true. design the simplest circuit that can be used for this purpose.
The simplest circuit that can be used for the control circuit must produce an output of 1 if at least two of the conditions 1,2 and 3 are true is given below.
What is control circuit?A special kind of circuit known as a control circuit is used to regulate the performance of a totally independent power circuit. Think about a water pump being driven by a 1,000 horsepower, large industrial motor. A high voltage electrical source with a 2,400 volt output is connected to the motor.
For the safety of the operator and the machinery, a control circuit is used to ensure that the motor is started and stopped safely.
The thermostat for a home's air conditioner is an illustration of a control circuit that is frequently used. The thermostat is a component of a low-voltage control circuit that manages a relay that actually activates and deactivates the power circuit to the air conditioner compressor.
See the given attachment below for the simplest circuit↓↓
Learn more about control circuit
https://brainly.com/question/28625332
#SPJ4
For all the circuits below, use the constant-voltage-drop diode model (VD=0.7V), VT=25.9mV, and n=1.
a) Find VOUT, ID, and the small signal diode resistance, rd. (10 points)
Assume for the following circuit that the diode is forward biased and there is a small-signal AC signal, vi,AC, in series with a DC voltage.
b) Derive the small-signal AC transfer function vo,AC(s)/vi,AC(s). (10 points)
c) Assume that RS=1kΩ, C=1μF. Calculate the value of ID and VS necessary to set the magnitude of the pole frequency of the AC transfer function, |ωp|, equal to 10krad/s. (10 points)
0.7 V potential barrier voltage. Only the positive half-cycles of the a.c. input voltage will cause the diode to conduct.
Our first semiconductor product is the diode. One distinguishing characteristic of a diode is that it only conducts current in one direction. We won't go into the specifics of a diode's operation or construction here. Fortunately, before employing a diode in a circuit, you don't need to understand how to create one. The voltage of the diode is ++plus on the end where forward current enters the diode: goldD vvstart color #e07d10, v, end color #e07d10. The voltage polarity is also shown by the optional orange curving arrow.
20 V at the maximum input voltage
Forward resistance is equal to 10.
Resistance to load, RL = 500
V0 = 0.7 V potential barrier voltage
Only the positive half-cycles of the a.c. input voltage will cause the diode to conduct.
Learn more about voltage here-
https://brainly.com/question/29342143
#SPJ4
add each element in origlist with the corresponding value in offsetamount. print each sum followed by a space. ex: if origlist
Print of each sum followed by a space. ex: if origlistimport = {4, 5, 10, 12} and offsetAmount = {2, 4, 7, 3}, print: is given below
What is a print?The print() function prints the specified message to the screen, or other standard output device. The message can be a string, or any other object, the object will be converted into a string before written to the screen.
Java code:
java.util.Scanner;
public class SumVectorElements
{
public static void main(String[] args)
{
final int NUM_VALS = 4;
int[] origList = new int[NUM_VALS];
int[] offsetAmount = new int[NUM_VALS];
int i = 0;
origList[0] = 40;
origList[1] = 50;
origList[2] = 60;
origList[3] = 70;
offsetAmount[0] = 5;
offsetAmount[1] = 7;
offsetAmount[2] = 3;
offsetAmount[3] = 0;
/* Your solution goes here */
// Print the Sum of each element in the origList
// with the corresponding value in the
// offsetAmount.
for (i = 0; i < NUM_VALS; i++)
{
System.out.print((origList[i] + offsetAmount[i])+" ");
}
System.out.println("");
return;
}
}
Learn more about print function
https://brainly.com/question/14298565
#SPJ4
a network engineer configures the ip route 10.1.1.0 255.255.255.0 s0/0/0 command on a router and then issues a show ip route command from enable mode. no routes for subnet 10.1.1.0/24 appear in the output. which of the following could be true?
The first number, 110, denotes this route's administrative distance. How reliable this route is is determined by administrative distance.
Because it is more "trustworthy," a similar route that has a shorter administrative distance is preferred. C (The nearby interface of the next-hop router) The next-hop router's IP address or the local router's interface can both be referred to using the ip route command. As a fallback route, a floating static route is utilized. It won't appear in the routing table until the primary route fails because it has a manual configured administrative distance that is greater than that of the primary route.
Learn more about manual here-
https://brainly.com/question/28257224
#SPJ4
FILL IN THE BLANK. ___ manages all of the activities involved in creating value by producing goods and services and distributing them to customers.
Operations Management manages all of the activities involved in creating value by producing goods and services and distributing them to customers.
What is Operations Management?
To achieve goals, increase productivity, and boost profits, corporate operations are managed. A subset of management known as operations management is responsible for monitoring a service's or product's entire production process, from the input stage to the finished stage. This entails organizing, planning, and managing operations, service delivery, and manufacturing and production procedures to achieve the desired result of a high-quality good or service that meets customer needs. Operations management oversees the fundamental operations of any organization.
To learn more about Operations Management:
https://brainly.com/question/1382997
#SPJ4
For the beam and loading shown, identify the maximum absolute values of the shear and bending moment. For the beam and loading shown, identify the maximum absolute values of the shear and bending moment.
The ordinates of the shear force diagram represent the slope of the moment diagram if the bending moment is a continuous curve.
The maxima and minima for well-behaved curves are located at the slope-zero points. Find the location along the beam where shear is zero as a result. Determine the bending moment at the same point, x, along the length of the beam. Finding the maximum bending moment for beams with concentrated loads, with or without uniform loading, is a more challenging challenge. We might look for x values where the shear ordinates intersect the shear zero point. But in regions with applied force, the shear diagram suddenly rises or falls.
Learn more about force here-
https://brainly.com/question/29510970
#SPJ4
Problem 3: Air enters a compressor operating at steady state at a pressure of 1bar, a temperature of 290K and a velocity of 6m/s through an inlet with an area of 0.1m2. It exits at 7bar and 450K with a velocity of 2m/s. Heat transfer from the compressor to the surroundings occurs at a rate of 180kJ/min. Assuming air behaves as an ideal gas, a) Calculate the power input to the compressor, in kW and sketch the process on a T- diagram. [15] b) Calculate the power input to the compressorn kW utilizing the polynomial approximation for the specific heat at constant pressure of Homework 4, problem 3, part c) [10] Compare and comment
The power input to the compressor, in kW and sketch the process on a T- diagram is -119.56Kw.
What is a compressor?
A compressor is a mechanical device that lowers the volume of a gas in order to raise its pressure. A specific sort of gas compressor is an air compressor.
Pumps and compressors both raise the pressure on a fluid and may move it via a pipe, hence they are comparable. The three most prevalent types of positive displacement air compressors used in small and medium-sized businesses are reciprocating, rotary screws, and vane compressors.
To learn more about a compressor, use the link given
https://brainly.com/question/29345949
#SPJ4
Determine the product of inertia for the beam's cross-sectional area with respect to the u and v axes. Given that theta= 28 degrees.
I_uv=
An object's Product of Inertia (POI) characteristic specifies an imbalance with respect to a certain set of coordinate axes.
What is a product of inertia?An object's Product of Inertia (POI) characteristic specifies an imbalance with respect to a certain set of coordinate axes. The POI in all three planes is zero if the object's mass is distributed symmetrically with regard to the XY, YZ, and ZX planes.A vertical two-plane spin balance machine may be used to measure the product of inertia directly (POI series). Spin balance devices rotate the cargo around a predetermined axis and look for any imbalances that are produced. This approach to calculating the product of inertia is by far the most accurate.Once more using frame O2, the primary axes are mentioned in the moment of inertia matrix, and the inertia products are zero.Find the attachment answer
Learn more about Product of Inertia refer to :
https://brainly.com/question/14119750
#SPJ4
the fraction recrystallized-time data for the recrystallization at 350 of a previously defomred aluminim are tabulated here.
The fraction recrystallized after a total time of 116.8 min is 0.66.
What is recrystallization?The process of recrystallizing an impure compound in a solvent is also referred to as fractional crystallization. Based on the idea that most solids become more soluble at higher temperatures, the purification process was developed. The amount of solute that can dissolve in a solvent increases as temperature rises, according to this.
On the basis of the information provided in the problem, we will set up two simultaneous equations with two unknowns:
[tex]1n(1n - \frac{1}{1-0.3} ) = 1nk + n 1n \ 95.2[/tex]
[tex]1n(1n - \frac{1}{1-0.8} ) = 1nk + n 1n \ 126.6[/tex]
Using your calculator you should get values of n = 5.3 and
k = 1.2 × 10⁻¹¹
From these values we can now solve for the fraction recrystallization from:
[tex]y = 1 - e^{kt^n}[/tex]
[tex]= 1 - e^{-1.2\times 10^{-11}\times (116.8)^{5.3}[/tex]
= 0.66
Learn more about fractional crystallization
https://brainly.com/question/3657395
#SPJ4
A glass cylinder filled with n = 0.91 mol of air is capped with amoveable piston that can slide frictionlessly inside the cylinder.The gas is adiabatically compressed by rapidly slamming thepiston down into the cylinder with a constant force F = 190 Nover a distance of d = 14 cm. What is the change in temper-ature ∆T of the gas? Draw a P V diagram of this process aspart of your representation; make sure it includes the adiabaticprocess, isothermal lines corresponding to the initial and finaltemperatures, and shading that corresponds to the work doneon/by the gas. For the limit check, investigate what happensto ∆T if the piston is pushed only a very short distance intothe cylinder (d →0).a) Please draw an appropriate representation of the problem.b) Write initial equations used, and display them. (There should be 2)c) Solve symbolically through algebraic work and show a symbolic answer.d)Perform a units check.e) As d→0, what limit does ∆T approach?Why does the result make physical sense?f) Plug-in numbers into a symbolic answer and obtain a numerical answer.
The cylinder's surrounds are totally isolated from it. No heat is transferred from the system (cylinder) to its surroundings as a result. The process is adiabatic as a result.
The cylinder's surrounds are totally isolated from it. No heat is transferred from the system (cylinder) to its surroundings as a result. The process is adiabatic as a result.
Inside the cylinder, the starting pressure is P 1.
Internal cylinder pressure at completion =P 2
Initial volume in the cylinder is equal to V 1.
Final internal volume of the cylinder =V 2
Specific heats ratio, = C V/C P
=1.4
We have P for an adiabatic process.
1V /1 γ=P 2V/ 2 γ
Half of the original volume is removed from the final volume.
∴V 2=V 1/2 P
1V 1 γ=P 2(V 1/2) γ
P 2/P 1=V 1 γ/(V 1/2) γ
=2 1.4 =2.639
The pressure thus rises by a ratio of 2.639.
To know more about pressure click here:
https://brainly.com/question/12971272
#SPJ4
