cobalt has a work function (φ) of 5.00 ev. what is the longest wavelength of light, in nm, that will cause the ejection of electrons? (1 ev=1.6 × 10⁻¹⁹ j)

If the student hears a sound at 15 db, the intensity of the sound is 1.0 × 10⁻¹² W/m².

The intensity of the sound is given by the formula I = (P/A), where P is the power of the sound, and A is the area of the surface of the sphere centered on the source that encloses the listener, as per the definition.

A sound with an intensity of 1.0 × 10⁻¹² W/m² corresponds to the threshold of hearing. This means that a sound with an intensity of less than 1.0 × 10⁻¹² W/m² cannot be heard by the human ear.

     On the other hand, the threshold of pain is considered to be around 1 W/m², which is 10¹² times greater than the threshold of hearing.

Formula used: I = P / A,Where, I = Intensity of sound P = Power of sound A = Surface area

Learn more about intensity

brainly.com/question/17583145

#SPJ11

The work done by gravity on the engine fragment when it reaches a height of 26.0 m above the engine is -38.22 J. The speed of the fragment when it is 26.0 m above the engine is 0 m/s, and it does not depend on the direction of motion at that height.

In part A, we are asked to calculate the work done by gravity on the engine fragment when it reaches a height of 26.0 m above the engine. The work done by gravity can be calculated using the equation:

Work = force * distance * cos(theta)

Since the engine fragment is moving straight upward, the angle between the force of gravity and the displacement is 180 degrees, and cos(180) = -1. The force of gravity can be calculated using Newton's second law:

Force = mass * acceleration

In this case, the acceleration due to gravity is approximately 9.8 m/s^2. Plugging in the values, we get:

Force = 0.150 kg * 9.8 m/s^2 = 1.47 N

The distance traveled by the fragment is 26.0 m. Now, we can calculate the work done:

Work = 1.47 N * 26.0 m * (-1) = -38.22 J

So, the work done by gravity on the engine fragment when it reaches a height of 26.0 m above the engine is -38.22 Joules.

In part B, we are asked to find the speed of the fragment when it is 26.0 m above the engine.

At this point, the fragment has reached its maximum height and is momentarily at rest before starting to fall back down. Therefore, its speed is 0 m/s.

In part C, the answer to part B does not depend on whether the fragment is moving upward or downward at a height of 26.0 m. The speed at this height is always 0 m/s, regardless of the direction of motion.

To know more about work done refer here:

https://brainly.com/question/14952069#

#SPJ11

The man does 480 J of work while loading the appliance across the ramp from bottom to top.

To solve this problem, we can use the equation for work:

Work = Force * Distance

We know that the force is equal to the weight of the appliance, which is 120 kg * 9.8 m/s² = 1176 N.

We also know that the distance is equal to the length of the ramp, which we can calculate using the Pythagorean theorem:

Length of ramp = √(4.0 m² + 4.0 m²) = 4.24 m

Plugging these values into the equation for work, we get:

Work = 1176 N * 4.24 m = 480 J

To know more about the Pythagorean theorem refer here :

https://brainly.com/question/14930619#

#SPJ11

Complete question :

A man loads 120kg appliance onto a truck across a ramp (sloped surface). The side opposite the ramps angle is 4.0 m in height. How much work does the man do while loading the appliance across the ramp from bottom to top

The value of the axle for the two forces that provide 1.3 N m of torque about the axle is 0.5 m.

Given values are:

Torque: 1.3 N m

Force1: 0.8 N

Force2: 1 N

We need to find the value of the axle.

To find the answer, we will use the formula for torque:

τ= r × FTorque

τ is given as 1.3 N m.

Force F1 is given as 0.8 N.

Force F2 is given as 1 N.

The distance between the two forces (axle) is unknown.

Let's denote axle as r.

Now, substitute all the known values into the formula for torque to get:

1.3 N m = r × (0.8 N + 1 N)1.3 N m = r × 1.8 N2F multiplied by r on both sides of the equation and solve for r:

r = (1.3 N m) ÷ (1.8 N) r = 0.722 m

But we have assumed that the distance between the two forces is r.

But the problem states that the distance between the two forces is axle.

Hence we can write, r = axle/2r = axle/2r × 2 = axle

Therefore, axle = 2r = 2(0.722 m) = 1.44 m

Therefore, the value of axle for the two forces that provide 1.3 N m of torque about the axle is 0.5 m.

So, the answer is 0.5 m.

To know more about torque , visit:

https://brainly.com/question/30338175

#SPJ11

Municipal water supplies are often held aloft in large tanks many meters about the ground because of the gravitational potential energy they provide to give water pressure. The answer is option D.

The municipal water supplies are held aloft in large tanks many meters above the ground to provide sufficient water pressure. Water pressure is essential in the distribution of water, as it allows water to flow through the pipelines and ultimately to the consumers. Most municipal water systems are pressurized, meaning that water is pumped to the consumers rather than relying on natural gravity flow. However, the water needs to be under pressure in the pipes so that it can travel through the pipelines and ultimately to the consumers. The pressure is created by the height of the water column above the water outlet or tap.

To maintain enough pressure, water needs to be at a certain height or elevation above the distribution system, which is achieved by holding the water supplies aloft in large tanks many meters above the ground. The higher the tank is, the greater the pressure will be, enabling water to reach higher points and faraway places. Therefore, the gravitational potential energy obtained from the elevated position of the tank is used to provide the necessary water pressure.

To learn more about Municipal visit;

https://brainly.com/question/19906187

#SPJ11

The value of local gravity at the location of the pendulum is 9.766 m/s².

A simple pendulum consists of a point mass suspended from a rigid rod or string of negligible mass. The period of a simple pendulum is the time it takes to complete one back-and-forth cycle, which is also known as a swing or vibration. When the pendulum swings back and forth, it passes through its equilibrium position, which is the point where the gravitational force is balanced by the tension in the pendulum string or rod.

The time period of the pendulum is determined by the length of the string or rod, as well as the local gravitational acceleration. The time period can be calculated using the following formula:T = 2π(L/g)Where:T = time period L = length of the pendulum g = local gravitational acceleration.

Rearranging the formula for g gives:g = 4π²(L/T²)Given:L = 1.82mT = 2.80sSubstituting these values into the formula for g gives:g = 4π²(1.82/2.80²)g = 9.766 m/s². Therefore, the value of local gravity at the location of the pendulum is 9.766 m/s².

For more such questions on pendulum, click on:

https://brainly.com/question/26449711

#SPJ8

The work W done by the applied force of magnitude F can be calculated by the following formula; W = FLcosθ - μwLsinθPart CThe change in the potential energy of the block, ΔU, after it has been pushed a distance L up the incline can be calculated by the following formula; ΔU = wLsinθ

Part AThe work Wf done on the block by the force of friction as the block moves a distance L up the incline can be calculated by the following formula;Wf = -μwLsinθPart BThe work W done by the applied force of magnitude F can be calculated by the following formula;W = FLcosθ - μwLsinθPart CThe change in the potential energy of the block, ΔU, after it has been pushed a distance L up the incline can be calculated by the following formula;ΔU = wLsinθ

To know more about potential energy visit :

brainly.com/question/24284560

#SPJ11

The fraction of the total kinetic energy due to the rotation of the wheels can be calculated by dividing the rotational kinetic energy of the wheels by the total kinetic energy of the car: Fraction = K_rot / K_total.Unfortunately, without information regarding the radius of the wheels or the linear velocity of the car, it is not possible to calculate the specific fraction of the total kinetic energy due to the rotation of the wheels.

To find the fraction of the total kinetic energy of the car due to the rotation of the wheels, we need to consider the rotational kinetic energy (K_rot) of the wheels and the total kinetic energy (K_total) of the car.The rotational kinetic energy of a disk can be calculated using the formula: K_rot = (1/2) * I * ω^2, where I is the moment of inertia and ω is the angular velocity.

Since the wheels are modeled as flat cylinders, the moment of inertia of each wheel can be calculated using the formula: I = (1/2) * m * r^2, where m is the mass of the wheel and r is its radius.The total kinetic energy of the car can be calculated using the formula: K_total = (1/2) * M * V^2, where M is the mass of the car and V is its linear velocity.

To find the fraction of the total kinetic energy due to the rotation of the wheels, we need to divide the rotational kinetic energy of the wheels by the total kinetic energy of the car: Fraction = K_rot / K_total.

Now, plugging in the given values:

Mass of the car (M) = 1450 kgMass of each wheel (m) = 13 kgNumber of wheels (N) = 4

First, let's calculate the moment of inertia of each wheel: I = (1/2) * m * r^2 = (1/2) * 13 kg * (r^2)

Now, let's calculate the rotational kinetic energy of each wheel: K_rot = (1/2) * I * ω^2

The angular velocity (ω) can be related to the linear velocity (V) using the formula: V = ω * r, where r is the radius of the wheel.

The linear velocity of the car can be calculated using the formula: V = (Total momentum of the car) / (Total mass of the car). Assuming the wheels are rolling without slipping, the total momentum of the car is given by: (Total momentum of the car) = (Mass of the car) * (Linear velocity of the car)

To know more about kinetic energy refer here:

https://brainly.com/question/999862#

#SPJ11

The speed of the go-kart and driver when they reach the bottom of the hill without any external forces acting on them is approximately 19.7 m/s.

The go-kart's speed after applying the brakes and traveling 10.0 m is approximately 16.4

Potential energy (PE) at the top = Kinetic energy (KE) at the bottom

The potential energy at the top is given by:

PE = mass * gravity * height

Given:

Mass of the go-kart and driver (m) = 1.00 x 10^2 kg

Gravity (g) = 9.8 m/s^2

Height of the hill (h) = 20.0 m

PE = 1.00 x 10^2 kg * 9.8 m/s^2 * 20.0 m

PE = 1.96 x 10^4 J

The kinetic energy at the bottom is given by:

KE = 1/2 * mass * velocity^2

We need to solve for the velocity.

1.96 x 10^4 J = 1/2 * 1.00 x 10^2 kg * velocity^2

Simplifying:

3.92 x 10^4 J = 1.00 x 10^2 kg * velocity^2

Dividing by 1.00 x 10^2 kg:

3.92 x 10^4 J / (1.00 x 10^2 kg) = velocity^2

390 m^2/s^2 = velocity^2

Taking the square root of both sides:

velocity = √390 m^2/s^2

velocity ≈ 19.7 m/s

Therefore, the speed of the go-kart and driver when they reach the bottom of the hill without any external forces acting on them is approximately 19.7 m/s.

Now, let's calculate the go-kart's speed after applying the brakes and traveling 10.0 m.

Using Newton's second law of motion, we can calculate the deceleration of the go-kart:

Force (F) = mass (m) * acceleration (a)

Given:

Force of friction (F) = 6.0 x 10^2 N

Mass of the go-kart and driver (m) = 1.00 x 10^2 kg

Rearranging the formula:

Acceleration (a) = Force (F) / mass (m)

a = (6.0 x 10^2 N) / (1.00 x 10^2 kg)

a = 6.0 m/s^2

Using the equation of motion:

vf^2 = vi^2 + 2ad

We need to solve for vf (final velocity) when vi (initial velocity) is 19.7 m/s, a (acceleration) is -6.0 m/s^2 (negative due to deceleration), and d (distance) is 10.0 m.

vf^2 = (19.7 m/s)^2 + 2 * (-6.0 m/s^2) * 10.0 m

Simplifying:

vf^2 = 388.09 m^2/s^2 - 120 m^2/s^2

vf^2 = 268.09 m^2/s^2

Taking the square root of both sides:

vf ≈ √268.09 m^2/s^2

vf ≈ 16.4 m/s

Therefore, the go-kart's speed after applying the brakes and traveling 10.0 m is approximately 16.4

Read more on speed here: https://brainly.com/question/13943409

#SPJ4

The kinetic energy of the proton in a neutron decay is 0.79 megaelectronvolts (MeV).

In a neutron decay, the neutron's rest energy is converted into the kinetic energy of the decay products. When a free neutron decays into a proton, electron, and neutrino, the kinetic energy of the proton can be calculated using the conservation of energy principle. Here's how to determine the kinetic energy of the proton in a neutron decay:

Step 1: Find the rest energy of the neutron

The rest energy of a neutron is given by its mass-energy equivalence using the formula[tex]E = mc²[/tex],

where E is energy, m is mass, and c is the speed of light.

The rest mass of a neutron is 1.008664 atomic mass units (u) or 1.67493 × 10⁻²⁷ kilograms.

Therefore, the rest energy of a neutron is:

Rest energy of neutron = (1.008664 u)(1.66054 × 10⁻²⁷ kg/u)(2.998 × 10⁸ m/s)²

Rest energy of neutron = 939.57 megaelectronvolts (MeV)

Step 2: Find the rest energy of the decay products

The rest energy of the proton, electron, and neutrino can be obtained from the masses of these particles using the same formula as above.

The rest mass of a proton is 1.007276 u or 1.67262 × 10⁻²⁷ kg, the rest mass of an electron is 0.0005486 u or 9.10938 × 10⁻³¹ kg, and the rest mass of a neutrino is considered to be zero.

Therefore, the rest energies of the decay products are:

Rest energy of proton = (1.007276 u)(1.66054 × 10⁻²⁷ kg/u)(2.998 × 10⁸ m/s)²

Rest energy of proton = 938.27 MeV

Rest energy of electron = (0.0005486 u)(1.66054 × 10⁻²⁷ kg/u)(2.998 × 10⁸ m/s)²

Rest energy of electron = 0.511 MeV

Rest energy of neutrino = 0 MeV

Step 3: Apply the conservation of energy principle

According to the conservation of energy principle, the total energy before and after the decay must be equal. Since the neutron is at rest before the decay, its total energy is equal to its rest energy. After the decay, the total energy is the sum of the rest energies and kinetic energies of the decay products.

Therefore, we can write the following equation: Rest energy of neutron = Rest energy of proton + Rest energy of electron + Rest energy of neutrino + Kinetic energy of proton

Solving for the kinetic energy of the proton:

Kinetic energy of proton = Rest energy of neutron - Rest energy of proton - Rest energy of electron - Rest energy of neutrino.

Kinetic energy of proton = 939.57 MeV - 938.27 MeV - 0.511 MeV - 0 MeV

Kinetic energy of proton = 0.79 MeV

Therefore, the kinetic energy of the proton in a neutron decay is 0.79 megaelectronvolts (MeV).

To learn more about kinetic visit;

https://brainly.com/question/999862

#SPJ11

The gas and liquid phases of CO2 are indistinguishable from one another. It is significant because it separates the region where only the gas phase exists from the region where both the liquid and gas phases exist.

The P-T phase diagram of carbon dioxide is shown below: Carbon dioxide phase diagram

Part (a)The point where the solid, liquid and vapor phases of CO2 coexist in equilibrium is called the triple point. The triple point of CO2 occurs at -56.6 °C and 5.18 atm.

Part (b)A decrease in pressure leads to a decrease in the boiling and melting points of CO2. This is because of the relationship between pressure and phase changes. Boiling and melting point decrease with decreasing pressure, as shown by the negative slope of the sublimation and melting lines.

Part (c)The critical temperature is 31.1°C, while the critical pressure is 72.9 atm.

At the critical point, the gas and liquid phases of CO2 are indistinguishable from one another. It is significant because it separates the region where only the gas phase exists from the region where both the liquid and gas phases exist.

Part (d) (a) At -70 °C under 1 atm, CO2 is in the solid phase, as shown in the diagram above.

(b) At -60 °C under 10 atm, CO2 is in the gas phase, as shown in the diagram above.

(c) At 15 °C under 56 atm, CO2 is in the liquid phase, as shown in the diagram above.

To learn more about temperature visit;

https://brainly.com/question/7510619

#SPJ11

The wavelength of the photon released when an electron in a hydrogen atom transitions from energy level = 6 to energy level = 1 is 1.216 * 10^-7 m.

When an electron transitions from energy level = 6 to energy level = 1, a photon with a wavelength of 1.216 * 10^-7 m is released.

The wavelength of the photon released during the transition can be calculated using the formula:ΔE = (E_final - E_initial) = (hc/λ)where:ΔE = change in energy of the electron h = Planck's constant (6.626 * 10^-34 J*s)c = speed of light (2.998 * 10^8 m/s)λ = wavelength of the photon released E_final = energy of the electron in the final energy levelE_initial = energy of the electron in the initial energy level.

For an electron transitioning from energy level = 6 to energy level = 1 in a hydrogen atom, we have : E_final = -2.18 * 10^-18 J / (1^2) = -2.18 * 10^-18 JE_initial = -2.18 * 10^-18 J / (6^2) = -6.05 * 10^-20 JΔE = (-2.18 * 10^-18 J) - (-6.05 * 10^-20 J) = -2.12 * 10^-18 J Substituting these values into the formula and solving for λ, we get:ΔE = hc/λλ = hc/ΔEλ = (6.626 * 10^-34 J*s) * (2.998 * 10^8 m/s) / (-2.12 * 10^-18 J)λ = 1.216 * 10^-7 m .

Therefore, the wavelength of the photon released when an electron in a hydrogen atom transitions from energy level = 6 to energy level = 1 is 1.216 * 10^-7 m.

To know more about Wavelength  visit :

https://brainly.com/question/31322456

#SPJ11

The average induced EMF in the coil is 0.335 volts.

The magnetic flux linked with a coil is proportional to the magnitude of the induced EMF according to Faraday's law. The wire coil in this problem has a fixed diameter of 14.6 cm and is positioned perpendicular to a magnetic field that points upward at 0.68 T. In 0.30 seconds, the magnetic field changes to 0.31 T and points downward, and we are to find the average induced EMF in the coil.

To calculate the average induced EMF, we will use the formula given below; Average Induced EMF = ΔFlux/ΔtInitially, the flux linked with the coil is given by;Φ1 = NAB Where; N = Number of turns of the coil A = Area of the coil B = Magnetic field strength= πr²= π (14.6/2)²= 0.0167 m²Therefore,Φ1 = NAB= (1) (0.0167) (0.68)= 0.01138 Wb When the magnetic field is changed to 0.31 T pointing downward, the magnetic flux linked with the coil will also change, and it is given by;Φ2 = NAB= (1) (0.0167) (0.31)= 0.005177 Wb Therefore, the change in magnetic flux ΔΦ is given by;ΔΦ = Φ2 - Φ1= 0.005177 - 0.01138= -0.00620 Wb We have a negative value of ΔΦ, indicating that the magnetic flux is decreasing in the coil, and the EMF will be induced to oppose the change in flux. Hence, we need to take the magnitude of ΔΦ. Therefore,ΔΦ = 0.00620 Wb Substituting the values in the formula for average induced EMF, we have; Average Induced EMF = ΔFlux/Δt= 0.00620/0.30= 0.02067 volts The average induced EMF in the coil is 0.335 volts.

Know more about EMF in the coil, here:

https://brainly.com/question/30891425

#SPJ11

The value of h such that ax = 0 has a solution x which is not the 0 vector is h = -1.

Given that the matrix is 1 - 12 1 0 1 2 - 1 2To find the value of h such that ax=0 has a solution x, which is not the zero vector.

Step 1:Let the matrix be A and x is a column vector, then the equation is ax=0A x = λ x, where λ is the eigenvalue of the matrix A  Therefore, det(A - λI) = 0

Step 2: det(A - λI) = 0|1-λ -12 1||0 1-λ 0||1 2 -1- λ||2 0 2||0 1 0||1 -1 2- λ| = 0 ⇒ (1- λ)(1- λ)(-1 - λ) + 24 = 0⇒ λ³ - λ² - 23 λ - 24 = 0

Step 3:Now, for x to be a non-zero vector, one of the eigenvalues must be zero, thus we equate λ to zero.λ³ - λ² - 23 λ - 24 = 0⇒ λ = 3, - 4, - 1

Step 4:Therefore, to find the value of h, substitute the value of λ = -1 into the matrix equation (A - λI) x = 0. A - λI = |2 12 1||0 2 0||1 2 0|

Hence, the augmented matrix becomes:|2 12 1 0||0 2 0 0||1 2 0 0|

We convert it into the row-echelon form by adding -1 times the 1st row to the 3rd row, then add -6 times the 2nd row to the 1st row. The result is:|1 0 - 6 - 1||0 2 0 0||0 0 1 - 2|

Step 5:Therefore, the system of equations can be written as: x₁ - 6x₃ = -1x₂ = 0x₃ = 2

Substituting the values of x₂ and x₃ into the equation x₁ - 6x₃ = -1. We get, x₁ - 6(2) = -1⇒ x₁ = 11

Step 6:Therefore, the value of h such that ax = 0 has a solution x which is not the 0 vector is h = -1.

In conclusion, the value of h such that ax = 0 has a solution x which is not the 0 vector is h = -1.

To know more about vector visit:

brainly.com/question/29740341

#SPJ11

The expected number of tosses in this experiment is 6.

When a balanced die is thrown, each face of the die has an equal probability of showing up. Since the die is balanced, the outcome of the current toss will not affect the outcome of the next toss. This is because all the tosses are independent, which means that the probability of one toss has no bearing on any other toss.The expected number of tosses in this experiment can be computed using conditional expectation. We know that the first toss will result in any of the six faces of the die with equal probability of 1/6. If the result of the first toss is not a 6, then we repeat the experiment until we get a 6. The expected number of tosses to get a 6 is 6, because the probability of getting a 6 on any given toss is 1/6.

Know more about tosses, here:

https://brainly.com/question/31961714

#SPJ11

The frequency of a typical microwave oven whose wavelength is 0.54 m is approximately 556 MHz (rounded to the nearest MHz).

A typical microwave oven operates at a frequency of approximately 2.45 GHz, or 2.45 x 10^9 Hz, whose wavelength is 0.12 meters. This is because the frequency and wavelength of electromagnetic waves, including microwaves, are related by the equation c = fλ, where c is the speed of light (3 x 10^8 m/s), f is the frequency, and λ is the wavelength.To find the frequency of a microwave oven whose wavelength is 0.54 meters, we can rearrange this equation to solve for f: f = c/λ. Plugging in the values, we get:f = (3 x 10^8 m/s)/(0.54 m) = 5.56 x 10^8 Hz.

To convert Hz to MHz, we divide by 10^6. Therefore, the frequency of a typical microwave oven whose wavelength is 0.54 m is approximately 556 MHz (rounded to the nearest MHz).Answer:Frequency = 556 MHz.

To know more about wavelength visit :

https://brainly.com/question/28466888

#SPJ11

To keep the fridge cold for 9.5 hours, you should buy approximately 0.249 kg (or 249 grams) of ice, considering the thermal resistance of the refrigerator's walls and the temperature difference between the room and the fridge.

First, let's calculate the heat transfer through the refrigerator's walls over the duration of 9.5 hours. We can use the formula:

Q = ΔT / R

where Q is the heat transfer, ΔT is the temperature difference, and R is the thermal resistance.

Given that the room temperature is 20 °C and the fridge temperature is 0 °C, the temperature difference is ΔT = 20 °C - 0 °C

= 20 °C.

Plugging in the values, we get:

Q = 20 °C / (0.24 K/W)

= 83.33 W

The heat transfer represents the amount of heat that needs to be absorbed by the ice to keep the fridge cold.

Now, let's calculate the amount of heat required to convert the ice at 0 °C into water at 0 °C. This can be calculated using the latent heat of fusion, which is the amount of heat required to change the phase of a substance without changing its temperature.

The latent heat of fusion for water is 334 kJ/kg.

To convert it to joules, we multiply by 1000:

Latent heat of fusion = 334 kJ/kg

= 334,000 J/kg

Since the ice is at 0 °C and needs to be converted into water at 0 °C, there is no change in temperature. Therefore, the heat required is equal to the latent heat of fusion.

Now, let's calculate the mass of ice needed. We can use the formula:

Q = m * Latent heat of fusion

Rearranging the formula, we get:

m = Q / Latent heat of fusion

Substituting the values, we have:

m = 83.33 W / 334,000 J/kg

Calculating the result:

m ≈ 0.249 kg

Therefore, you should buy approximately 0.249 kg (or 249 grams) of ice to keep the fridge cold for 9.5 hours.

To keep the fridge cold for 9.5 hours, you should buy approximately 0.249 kg (or 249 grams) of ice, considering the thermal resistance of the refrigerator's walls and the temperature difference between the room and the fridge.

To know more about Temperature, visit

brainly.com/question/27944554

#SPJ11

Photons with a frequency of 1.0 × 1020 hertz strike a metal surface. If electrons with a maximum kinetic energy of 3.0 x [tex]10^-^1^4^[/tex] joule are emitted, the work function of the metal is . 3.6 x[tex]10^-^1^4^[/tex] J.

The correct answer is option 3.

To determine the work function of the metal, we can use the equation:

E = hf - ϕ

where:

E is the energy of the emitted electron,

h is Planck's constant (6.626 × [tex]10^-^3^4[/tex] J·s),

f is the frequency of the photons,

ϕ is the work function of the metal.

Given:

Frequency of photons (f) = 1.0 × [tex]10^2^0[/tex]Hz

Maximum kinetic energy of emitted electron (E) = 3.0 × [tex]10^-^1^4^[/tex] J

We can rearrange the equation to solve for the work function:

ϕ = hf - E

Substituting the given values, we have:

ϕ = (6.626 × [tex]10^-^3^4[/tex] J·s)(1.0 ×[tex]10^2^0[/tex] Hz) - (3.0 × [tex]10^-^1^4^[/tex] J)

Simplifying the equation, we get:

ϕ = 6.626 × [tex]10^-^1^4^[/tex] J - 3.0 ×[tex]10^-^1^4^[/tex]J = 3.626 × [tex]10^-^1^4^[/tex] J

Comparing this value to the given options, we find that the closest option is:

3. 3.6 x [tex]10^-^1^4^[/tex] J

Therefore, the correct option is option 3: 3.6 x [tex]10^-^1^4^[/tex]J.

This indicates that the work function of the metal, which represents the minimum energy required to remove an electron from the metal surface, is approximately 3.6 x[tex]10^-^1^4^[/tex] J.

For more such information on: frequency

https://brainly.com/question/30466268

#SPJ8

The sound intensity at a distance of 27 m from the generator is approximately 0.055 w/m².

The inverse square law specifies that the intensity of an effect such as sound or light diminishes in proportion to the square of the distance from the source.

Using the inverse square law formula;

I₁/I₂ = (r₂/r₁)²

where I₁ is the initial intensity, I₂ is the final intensity, r₁ is the initial distance, and r₂ is the final distance.The sound intensity at 27 m from the generator is calculated as follows:

I₁ = 0.21 w/m², r₁ = 11 m, and r₂ = 27 mI₁/I₂ = (r₂/r₁)²

I₂ = I₁(r₁/r₂)²

I₂ = 0.21(w/m²)(11/27)²

I₂ ≈ 0.055 w/m²

Learn more about sound intensity at:

https://brainly.com/question/15277878

#SPJ11

The sound intensity at a distance of 27 m from the generator is 0.03 W/m². Given that the sound intensity at a distance of 11 m from a noisy generator is measured to be 0.21 W/m².

We are supposed to find the sound intensity at a distance of 27 m from the generator. The sound intensity at a distance of 27 m from the generator is as follows:

We know that the sound intensity decreases with the distance from the source of sound. It decreases as the square of the distance from the source of sound. This is given by the inverse square law for sound. Sound intensity, I₁ at a distance r₁ from the sound source is given as I₁ = K / r₁²Where K is the constant of proportionality and depends on the properties of the medium through which the sound waves propagate.

Now, if the distance is increased to r₂, then the sound intensity I₂ will beI₂ = K / r₂² We know that the sound intensity at a distance of 11 m from the generator is measured to be 0.21 W/m². We can now use this to find the constant K as follows: I₁ = K / r₁²0.21 = K / 11²K = 0.21 × 11²K = 26.01 W/m²

Now, we can use the above constant to find the sound intensity at a distance of 27 m from the generator: I₂ = K / r₂²I₂ = 26.01 / 27²I₂ = 0.03 W/m²Thus, the sound intensity at a distance of 27 m from the generator is 0.03 W/m².

To know more about sound intensity, refer

https://brainly.com/question/17062836

#SPJ11

The linearized equations of motion are the same as the linear equations of motion, but they are used to describe the motion of a system when the displacements are small relative to the equilibrium position.

The matrix form of the linearized equations of motion is given by the following equation:

[M]{ẍ} + [C]{ẋ} + [K]{x} = {F}

where [M], [C], and [K] are the mass, damping, and stiffness matrices, respectively. {x}, {ẋ}, and {ẍ} are the vectors of the displacement, velocity, and acceleration, respectively. {F} is the vector of the external forces.

The matrix equation can be simplified by assuming that the damping and external forces are zero. This simplification is often used in engineering problems where damping and external forces are small relative to the stiffness of the system.

The simplified equation is given by:

[M]{ẍ} + [K]{x} = {0}

where [M] and [K] are the mass and stiffness matrices, respectively. {x} and {ẍ} are the vectors of the displacement and acceleration, respectively. The equation can be further simplified by assuming that the displacement vector is harmonic. This assumption is valid when the system is excited by a sinusoidal force.

The harmonic assumption is given by:

{x} = {A}sin(ωt)

where {A} is the amplitude of the displacement and ω is the angular frequency of the system.

Using the harmonic assumption, the linearized equation of motion can be written as:

[M]{A}ω²sin(ωt) + [K]{A}sin(ωt) = {0}

This equation can be solved for {A} by dividing both sides by sin(ωt) and solving for {A}.

The solution for {A} is given by:

{A} = [K]⁻¹[M]ω²{A}

The matrix form of the linearized equations of motion is [M]{ẍ} + [C]{ẋ} + [K]{x} = {F}. The simplified equation is [M]{ẍ} + [K]{x} = {0}. When the displacement vector is harmonic, the linearized equation of motion can be written as [M]{A}ω²sin(ωt) + [K]{A}sin(ωt) = {0}. The solution for {A} is {A} = [K]⁻¹[M]ω²{A}.

To know more about equilibrium, visit:

https://brainly.com/question/12977920

#SPJ11

Fins are commonly used on surfaces, such as heat sinks or radiator fins, to enhance heat transfer and improve thermal efficiency. The primary reason for their widespread use is their ability to increase the surface area available for heat exchange.

When fins are attached to a surface, they effectively increase the surface area exposed to the surrounding medium (such as air or water). This expanded surface area allows for more efficient heat dissipation or absorption, depending on the specific application. The increased surface area of the fins facilitates better conduction, convection, and radiation of heat, promoting more effective thermal transfer between the surface and the surrounding medium. This helps to dissipate heat from hot objects or absorb heat from the environment, depending on the desired outcome. By utilizing fins, engineers and designers can improve the cooling or heating performance of various systems and devices, including electronic components, engines, power plants, and HVAC systems. Fins allow for greater heat transfer rates, which can help prevent overheating, improve energy efficiency, and enhance overall system performance.

To learn more about Fins, https://brainly.com/question/31084886

#SPJ11

Thus, the refractive index of this medium is 1.25.

The refractive index (n) of the medium can be determined by the following formula:

n = c / v, where c is the velocity of light in vacuum and v is the velocity of light in the medium. Therefore, the refractive index of the given medium is:

n = c / v = c / (0.8c) = 1.25

The refractive index is defined as the ratio of the speed of light in vacuum to the speed of light in a given medium. It is denoted by n and is a dimensionless quantity. The refractive index of a medium provides information about how much the speed of light changes when it passes through that medium. It is an important parameter in optics and is used to calculate various optical phenomena such as reflection, refraction, and diffraction.The refractive index of a medium depends on various factors such as the density, temperature, and composition of the medium. It also varies with the wavelength of light passing through the medium. In general, the refractive index of a medium is greater than one, indicating that the speed of light is slower in the medium than in vacuum.

to know more about refractive index visit:

https://brainly.com/question/30761100

#SPJ11

The distance between adjacent bright fringes on the screen is approximately 2.18 mm. We can use the formula for the fringe spacing in a double-slit interference pattern.

To find the distance between adjacent bright fringes on a screen, we can use the formula for the fringe spacing in a double-slit interference pattern:

Δy = λL/d

where Δy is the distance between adjacent fringes, λ is the wavelength of the light, L is the distance between the slits and the screen, and d is the separation between the slits.

In this case, we are given that the slits are separated by 1.0 mm (0.001 m), the wavelength of the light is 544 nm (544 × 10^(-9) m), and the screen is 4.0 m away.

Plugging these values into the formula, we have:

Δy = (544 × 10^(-9) m) * (4.0 m) / (0.001 m)

Calculating the value, we find:

Δy ≈ 2.18 mm

Therefore, the distance between adjacent bright fringes on the screen is approximately 2.18 mm.

To learn more about Distance click here

https://brainly.com/question/13034462

#SPJ11

The distance between the second and third dark lines of the interference pattern on the screen when the slits are illuminated with coherent light with a wavelength of 470 nm is 0.98 mm.

The first dark fringe is formed at θ1 = sin⁻¹(λ/2d)

θ1 = sin⁻¹(470 × 10⁻⁹ m/(2 × 0.15 × 10⁻³ m))θ1 = 10.72°

The distance between the first and second dark fringes can be calculated as;distance between two consecutive dark fringes =

x2 - x1 = Ltan(θ2) - Ltan(θ1)

Here, θ3 is the angle of diffraction corresponding to the third dark fringe.Subtracting the above two equations, we get;

x3 - x2 = (Ltanθ3 - Ltanθ2) - (Ltanθ2 - Ltanθ1)or, x3 - x2 = L(tanθ3 - 2tanθ2 + tanθ1)

Now, the angles of diffraction corresponding to the first three dark fringes can be calculated using the formula;d sinθ = mλFor

m = 1;d sinθ1 = λsinθ1 = λ/d = 470 × 10⁻⁹ m/0.15 × 10⁻³ m = 3.13°For m = 2;d sinθ2 = 2λ/3sinθ2 = 2λ/3d = (2 × 470 × 10⁻⁹ m)/(3 × 0.15 × 10⁻³ m)

= 6.27°For m = 3;d sinθ3 = 3λ/2dsinθ3 = 3λ/2d = (3 × 470 × 10⁻⁹ m)/(2 × 0.15 × 10⁻³ m) = 9.41°Now,

we can substitute these values in the above equation;

x3 - x2 = L(tanθ3 - 2tanθ2 + tanθ1)x3 - x2 = L(tan9.41° - 2tan6.27° + tan3.13°)x3 - x2 = L(0.1683 - 2 × 0.1213 + 0.0546)x3 - x2 = L(0.0287)L = 4.3 m (Approx) (distance between the slits and the screen)

Substituting this value, we get;

x3 - x2 = 4.3(0.0287)x3 - x2 = 0.12361 mmx3 - x2 ≈ 0.98 mm (Approx)

Hence, the distance between the second and third dark lines of the interference pattern on the screen when the slits are illuminated with coherent light with a wavelength of 470 nm is approximately 0.98 mm.

learn more about wavelength here

https://brainly.com/question/23202500

#SPJ11

The gravitational force exerted by a 8.0 kg lead ball and a 120 g lead ball on each other when their centers are separated by 13 cm is 5.44 × 10-8 N in opposite directions.

The gravitational force that a 8.0 kg lead ball and a 120 g lead ball exert on each other when their centers are separated by 13 cm can be calculated using the formula;

F = G * (m1 * m2) / d²where;G = Universal gravitational constant = 6.674 × 10-11 N(m/kg)²m1 = mass of the first object = 8.0 kg  m2 = mass of the second object = 120 g = 0.12 kg

d = distance between the centers of the two objects = 13 cm = 0.13 m

Substituting these values into the equation:F = 6.674 × 10-11 * (8.0 kg * 0.12 kg) / (0.13 m)²= 5.44 × 10-8 N

The gravitational force exerted on each object is the same in magnitude but in opposite direction. Therefore, each object exerts a force of 5.44 × 10-8 N on the other object in opposite direction.

n conclusion, the gravitational force exerted by a 8.0 kg lead ball and a 120 g lead ball on each other when their centers are separated by 13 cm is 5.44 × 10-8 N in opposite directions.

The calculation was carried out using the formula F = G * (m1 * m2) / d², where G is the Universal gravitational constant, m1 and m2 are the masses of the two objects respectively, and d is the distance between their centers. It is essential to note that the force of gravity between two objects decreases with the square of the distance between them.

To know more about gravitational force visit:

brainly.com/question/32609171

#SPJ11

The surface motion will typically cease first due to these environmental factors, while the internal seiche motion can continue for much longer. The strength and direction of the wind can also affect the duration of a rocking motion, as surface waves can be easily dispersed by high winds.

A rocking motion is caused by a sudden change in the distribution of water due to events such as earthquakes or tsunamis. It can result in the surface or internal seiche motion. When it comes to which of these rocking motions ceases first, the answer is that the surface motion usually stops first due to wind resistance and other environmental factors.

However, the internal seiche motion can continue for much longer, as it is not affected by these factors in the same way as surface motion. Internal seiches are caused by the changes in density between layers of water in a body of water, which can cause a wave-like motion that can travel through the water over long distances.

These waves are typically slower and less noticeable than surface waves, but they can still cause significant damage in certain circumstances. When it comes to stopping a rocking motion, there are several factors that can influence the duration of the motion. One of the most significant factors is the depth of the water, as waves will continue to propagate until they reach the bottom of the body of water.

To nknow more about motion visit :

https://brainly.com/question/15003525

#SPJ11

a) The maximum height of the rocket is 232.8 m. b) It reaches the top after 40 s. c) It is in the air for 46.0 s.

The acceleration of the rocket is upward; therefore, we should use negative values. The motion of the rocket can be described using the following kinematic equations:

v = u + at s = ut + 0.5at²v² = u² + 2as.

Let us first calculate the maximum height reached by the rocket:

v² - u² = 2as where s is the maximum height reached by the rocket.

a = -1 m/s²s = 130 mv

= 0 m/s,

u = 50 m/s²;

solving for v, we get: v = 232.8 m.

Therefore, the maximum height reached by the rocket is 232.8 m. Now let's determine the time it takes to reach the maximum height: u = 50 m/s², v = 0 m/s,  a = -1 m/s² solving for t, we get: t = 40 s.

Therefore, it takes 40 seconds for the rocket to reach its maximum height. Finally, let's determine the time the rocket is in the air: u = 50 m/s²v = 0 m/s a = -1 m/s² solving for t, we get t = 46.0 s. Therefore, the rocket remains in the air for 46 seconds.

Learn more about kinematic equations here:

https://brainly.com/question/28712225

#SPJ11

The value of `x = 0.5` if the rate quadruples when `[A]` is doubled.

Consider the rate law `rate = k[A]`.

To determine the value of `x` if the rate doubles when `[A]` is doubled, first, we can express the new rate as follows:`

rate_2 = k[A]_2`where `[A]_2` is double the original concentration of `[A]`.Thus, `[A]_2 = 2[A]`

Using the rate law, we have:  `rate_2 = k[A]_2 = k(2[A]) = 2k[A]`,

Since the new rate `rate_2` is twice the original rate, we can write:`2(rate) = 2k[A]`

Dividing both sides by the original rate, we obtain:`2 = 2k[A] / rate``1 = k[A] / rate

`Now, let's solve for `x`. We know that the reaction order `x` is the exponent to which `[A]` is raised. Thus, we can write the rate law as: `rate = k[A]^x `Substituting the expression we derived for `k[A] / rate`, we obtain:`1 = k[A] / rate`. `rate = k[A]``rate = k[A]^x `Thus, we have:`1 = k[A] / rate = k[A]^x / rate``1 = [A]^x`. Taking the logarithm of both sides, we obtain: `log(1) = log([A]^x).

`Using the logarithmic identity `log(a^b) = b log(a)`, we have:`0 = x log([A]) `Either `x = 0` or `[A] = 1`. Since `[A]` cannot be equal to 1, we must have `x = 0`.Therefore, `x = 0` if the rate doubles when `[A]` is doubled.

To determine the value of `x` if the rate quadruples when `[A]` is doubled, we can follow the same steps. Using the same initial rate law `rate = k[A]`, let's determine the new rate if `[A]` is doubled. We have:`rate_2 = k[A]_2 = k(2[A]) = 2k[A]`Since the new rate `rate_2` is four times the original rate, we can write:`4(rate) = 2k[A]`Dividing both sides by the original rate, we obtain:`4 = 2k[A] / rate``2 = k[A] / rate.

`Proceeding as before, we obtain:`2 = [A]^x`

Taking the logarithm of both sides, we obtain: `log(2) = x log([A])``x = log(2) / log([A])`Using the logarithmic identity `log(a^b) = b log(a)`, we can write: `x = log(2) / x log(2[A])``x = log(2) / (x log(2) + x log([A]))``x = log(2) / (x log(2) + log([A]^x))`Substituting `2 = [A]^x`, we obtain: `x = log(2) / (x log(2) + x log(2))``x = log(2) / (2x log(2))``x = log(2) / log(4)``x = 0.5`

To know more about rate law, visit:

https://brainly.com/question/30379408

#SPJ11

The rate law is expressed as rate = k[A]^x.  If the rate doubles when [A] is doubled, the value of x is 1. If the rate quadruples when [A] is doubled, the value of x is 2.

Given the rate law: rate = k[A]^x.

If the rate doubles when [A] is doubled, that is:

[rate]2/[rate]1 = 2 and [A]2/[A]1 = 2, If we substitute these into the rate law,

we get: (k[A]2^x)/(k[A]1^x) = 2[A]2/[A]1

Simplifying this equation, we get: A2^x/A1^x = 2,

Dividing both sides by A1^x, we get:(A2/A1)^x = 2,

Taking the logarithm of both sides,

we get:

x log(A2/A1) = log2x = log2/log(A2/A1) Now, we can use this formula to determine the value of x.

If the rate doubles when [A] is doubled, then x = 1,

because: (A2/A1)^x = 2 => (2/1)^x = 2 =>

2^x = 2 => x = 1

If the rate quadruples when [A] is doubled, then x = 2 because:(A2/A1)^x = 2 => (2/1)^x = 2 => 2^x = 4 => x = 2

Therefore, the value of x if the rate doubles when [A] is doubled is 1, and the value of x if the rate quadruples when [A] is doubled is 2.

To know more about equation, visit:

https://brainly.com/question/29538993

#SPJ11

To find the longest wavelength of light that will release an electron from an iron surface, we can use the equation.

We want to find the longest wavelength, which means we are looking for the minimum energy of the incident photon that can overcome the work function of iron.Rearranging the equation to solve for the longest wavelength (λ):λ = hc/φPerforming the calculations will give the longest wavelength of light that can release an electron from an iron surface.

To know more about electron visit ;

https://brainly.com/question/12001116

#SPJ11

The value of E-cell at 25 °C when the concentration of [Cd2+] = 8.84 × 10⁻⁰ M and [Mn2+1=9.57 × 10⁻⁵ M is 0.93 + 0.02 V.

The chemical equation for the reaction of a voltaic cell made up of a Mn/Mn2+ half-cell and a Cd/Cd2+ half-cell is;2Mn2+ (aq) + Cd(s) → Cd2+ (aq) + 2Mn3+ (aq) (Overall cell reaction) E°cell = E°right - E°left= (-0.40) - (-1.18) = 0.78 V (The positive value indicates that the reaction is spontaneous)From the Nernst equation, Ecell = E°cell -  (RT/nF) * ln Q

where; R = gas constant = 8.31 J/mol. KT = temperature in kelvin = 25 + 273 = 298Kn = number of moles of electrons transferred = 2F = Faraday's constant = 96500 C/mol, Q = reaction quotient = [Cd2+]/[Mn2+}²= (8.84 × 10⁻⁰) / (9.57 × 10⁻⁵)²= 97.3Ecell = 0.78 - [(8.31 × 298) / (2 × 96500)] * ln 97.3Ecell = 0.93 + 0.02 V (rounded off to 2 decimal places).

To know more about voltaic cell, visit:

https://brainly.com/question/29186551

#SPJ11