Explanation:
The inertia of a 4 kg mass is four times as great as a 1 kg mass.
what do you think will happen to the people in the airplane if their location is unknown?
Question:
What do you think will happen to the people in the airplane if their location is unknown?
My opinion:
I mean what are the circumstances? Is it just a rogue pilot that takes a random plane with all the passengers Hostage or is It bad whether an they lose connection to the airport? I Mean either way, If I was on a plane being held hostage, or the plane crashing, I Would be a in a panic type state of mind. I Would be worried about what will happen when the plane crashes, I would worry about my friends or family that is aboard the plane with me, I Would be scared for my life because I Don't know if i would make it out alive.
Also:
How would they know their location is unknown wouldn't the Pilot be the only one to know exactly where there with their navigating system, But then again there was this time I headed to Florida an They had mini tv's on the seats of each chair, where you could: Watch movies, listen to music, an Also see exactly where you are in the world. It was really amazing actually.
Mean diameter of cylinder measured by A is 2.50 cm with a possible error of 0.25 cm whereas mean height of cylinder measured by B is 10.0 cm with a possible error of 0.5 cm. Whose measurement is more accurate?
Answer:
The measurement of first cylinder is more accurate.(A)
Explanation:
The least possible error higher will be accuracy.
a ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. what is the balls overall speed at the top of its trajectory?
Answer:
30m/ s
Explanation:
this is an example of a projectile, where the path traced by the ball will be a downward parabola.
one must know that the vertical velocity of an object having projectile motion is zero at the top of its trajectory and that the horizontal velocity remains constant throughout.
this means, at the top of the trajectory the ball's overall speed will be equal to its horizontal velocity.
and horizontal velocity is given 30 m/s
hence, overall speed of the ball = 30m/ s
Match the synthetic materials with the processes used to make them.
suppose the pilot starting again from rest opens the throttle part.way at constant acceleration the airboat then covers a distance of 60.0m in 10.0s find the net force action on the boat
Answer:
Acceleration is 1.2 m/s^2.
Explanation:
initial velocity, u = 0
distance, d = 60 m
time, t = 10 s
Let the acceleration is a.
use second equation of motion
[tex]s= u t +0.5 at^2\\\\60 = 0 + 0.5 \times a \times 10\times 10\\\\a = 1.2 m/s^2[/tex]
Now according to the Newton's second law
Force = mass x acceleration
Let the mass is m.
F = m x 1.2 = 1.2 m Newton
A student walks 350 m [S], then 400 m [E20°N], and finally 550 m [N10°W]. Using the component method, find the resultant (total) displacement). Round your answer to the appropriate significant figures. Round your angle to the nearest degree.
In component form, the displacement vectors become
• 350 m [S] ==> (0, -350) m
• 400 m [E 20° N] ==> (400 cos(20°), 400 sin(20°)) m
(which I interpret to mean 20° north of east]
• 550 m [N 10° W] ==> (550 cos(100°), 550 sin(100°)) m
Then the student's total displacement is the sum of these:
(0 + 400 cos(20°) + 550 cos(100°), -350 + 400 sin(20°) + 550 sin(100°)) m
≈ (280.371, 328.452) m
which leaves the student a distance of about 431.8 m from their starting point in a direction of around arctan(328.452/280.371) ≈ 50° from the horizontal, i.e. approximately 431.8 m [E 50° N].
what is good operating practice concerning the use of aircraft lighting while on the ground at night
Answer:
It is important to be extra careful at night and in periods of low visibility from sunset to sunrise and to focus on operating the aircraft safely when the aircraft is moving. Ensure checklist are run through and avoid non essential communications prior to the aircraft being stopped and the breaks are set
Explanation:
According to aircraft rules and regulation, the position lights of an aircraft are required to be switched on on an aircraft which is either operated on the surface and during flight from sunset to sunrise or when the elevation of the Sun below the horizon is more than 6°
However, the anti collision lights are not required to be lighted during night operations, unless the pilot in command specifies it for safety reasons
Why would researchers not be allowed to recreate the Little Albert experiment today?
Answer:
Explanation:
En la historia de la ciencia se han dado auténticas barbaridades. Pruebas con animales que hoy no perdonaría nadie, o investigaciones de conducta con personas como la de la cárcel de Stanford, que se han saldado como una especie de pasado incómodo sobre los límites de la experimentación. Sin embargo, pocos se pueden acercar por su carácter perturbador al denominado experimento de Little Albert o Pequeño Albert: El salvaje intento por probar con un bebé que las fobias pueden ser condicionadas y aprendidas. Y lo que es peor, conseguirlo.
Esta idea surgió de la mente de John Broadus Watson, reconocido padre de la rama conductista de la psicología, que desde 1913 había comenzado a probar en animales sus tesis. Estas bebían directamente del los estudios de Iván Pavlov, fisiólogo ruso que ganó el Nobel en 1904 por sus estudios sobre el sistema digestivo, pero que también sentó precedentes sobre la psicología.
link por si te interesa:
https://hipertextual.com/2017/10/pequeno-albert
What is the size of the force acting on a copper wire with a magnetic flux density of 3.6 x 10-2 T acting at
right angles to the wire of length 24 m and current of C:048 A? Give your answer to an appropriate
number of significant figures.
Answer:
F = 0.414 N
Explanation:
Given that,
Magnetic flux density,[tex]B=3.6\times 10^{-2}\ T[/tex]
The length of the wire, l = 24 m
Current, I = 0.48 A
We need to find the force acting on the wire. The formula for the force is given by:
[tex]F=ILB[/tex]
Put all the values,
[tex]F=0.48\times 24\times 3.6\times 10^{-2}\\\\F=0.414\ N[/tex]
So, the force acting on the copper wire is equal to 0.414 N.
The magnetic force of the copper wire is 41.472 N.
Magnetic force of the copper wire
The magnetic force of the copper wire is calculated by applying the following equation.
F = BIL x sinθ
Where;
θ is the inclination of the magnetic fieldI is the currentL is the length of the wireB is the magnetic field strength = flux densityF = (3.6 x 10⁻²) x (48) x 24 x sin(90)
F = 41.472 N
Thus, the magnetic force of the copper wire is 41.472 N.
Learn more about magnetic force here: https://brainly.com/question/13277365
in parallel combination of electrical appliances Total Electric Power a. increase b. decrease c. remain same
Answer:
In a parallel combination of electrical appliances total electric power will increase
Answer is A it will increase
Name the physical quantity and write its SI unit which gives the slope Of I-V graph?
Slope of I-V graph is Resistance.
Its S.I. unit is Ohm.
The symbol of ohm is Ω.
In a softball game a batter hits at the velocity of 28 and an angle shown 45 below . What is the maximum range of the ball
Answer:
80 m
Explanation:
Given :
Initial Velocity, U = 28 m/s
θ = 45°
The maximum range occurs at angle, θ = 45°
The maximum range, R is given by ;
R = U²sin2θ / g
g = acceleration due to gravity = 9.8 m/s²
Plugging in the values :
R = [28² * sin2(45)] / 9.8
R = [28² * sin90] / 9.8
R = 784 / 9.8
R = 80 m
In a science museum, a 130 kg brass pendulum bob swings at the end of a 14.4 m -long wire. The pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.7 m to the side and releasing it. Because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s. You may want to review (Pages 405 - 407) . Part A At exactly 12:00 noon, how many oscillations will the pendulum have completed
Answer:
The time in which the pendulum does a complete revolution is called the period of the pendulum.
Remember that the period of a pendulum is written as:
T = 2*pi*√(L/g)
where:
L = length of the pendulum
pi = 3.14
g = 9.8 m/s^2
Here we know that L = 14.4m
Then the period of the pendulum will be:
T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s
So one complete oscillation takes 7.61 seconds.
We know that the pendulum starts moving at 8:00 am
We want to know 12:00 noon, which is four hours after the pendulum starts moving.
So, we want to know how many complete oscillations happen in a timelapse of 4 hours.
Each oscillation takes 7.61 seconds.
The total number of oscillations will be the quotient between the total time (4 hours) and the period.
First we need to write both of these in the same units, we know that 1 hour = 3600 seconds
then:
4 hours = 4*(3600 seconds) = 14,400 s
The total number of oscillations in that time frame is:
N = 14,400s/7.61s = 1,892.25
Rounding to the next whole number, we have:
N = 1,892
The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.
Elements that typically give up electrons CHECK ALL THAT APPLY
A. are nonmetals
B. have a lower ionization energy
C. include the halogens
D. are metals
Answer:
B. have a lower ionization energy
D. are metals
Explanation:
An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.
Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.
In Chemistry, electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.
Valence electrons can be defined as the number of electrons present in the outermost shell of an atom. Valence electrons are used to determine whether an atom or group of elements found in a periodic table can bond with others. Thus, this property is typically used to determine the chemical properties of elements.
Valency can be defined as a measure of the combining power of a chemical element with other atoms to form a molecule or chemical compound.
Typically, valency is measured by the amount of hydrogen atoms that a chemical element can combine with or displace to form a molecule or chemical compound.
Ionization energy can be defined as the minimum energy required to remove or detach an electron from a neutral atom in a gaseous state.
Generally, the ionization energy of chemical elements tend to increase from left to right across a period on the periodic table. This increase is due to the fact that the atomic radius of chemical elements generally decreases across the periodic table, typically from alkali metals (group one elements such as hydrogen, lithium and sodium) to noble gases (group eight elements such as argon, helium and neon) i.e from left to the right of the periodic table. Also, the atomic radius of a chemical element increases down each group of the periodic table, typically from top to bottom (column).
This ultimately implies that, atoms with relatively large atomic radii tend to have a low electron affinity and a low ionization energy.
In conclusion, chemical elements that typically give up electrons are metals because their outermost shell contains excess electrons and have a lower ionization energy.
What is the colour of a shirt which has blue and white stripes when put under yellow light? Explain.
Answer:
Black and yellow strips.
Explanation:
Color of shirt is blue and white stripes
When the shirt is seen in the yellow light, the blue color do not reflect any color so it appears black and the white color reflects the yellow light so it appears yellow.
Thus, the color of shirt is blue appears black and white appears yellow.
A 6 m/s vector pointing North is added to a 2 m/s vector pointing East. What are the magnitude and direction of the resultant?
Answer:
A + B = C Ax = 2 Ay = 0 Bx = 0 By = 6
Ax + Bx = Cx = 2
Ay + By = Cy = 6
C = (2^2 + 6^2)^1/2 = 6.32
Tan Cy / Cx = 6 / 2 = 3
Cy at 71.6 deg
A ball tied on a string rotates in a circular path as shown above. The only forces acting on the ball at any point are the weight and of the string. What is the equation for the net centripetal force at point C?
Answer:
the third one T-W
Explanation:
the direction of the Tension and weight are opposite
An acceptable radiograph was taken using 40 mAs at 80 kVp at a distance of 60 inches. A second radiograph is requested at 40 inches. What mAs should be used to produce this radiograph with a 40-inch distance
Answer:
17.8 mAs
Explanation:
The exposure maintenance formula shows that as SID increases, intensity decreases, causing a decrease in film exposure and density. The mAs is directly proportional to the square of the distance. That is as mAs increases, distance increases, and vice versa, in order to maintain image receptor exposure. It is given by:
[tex]\frac{mAs_1}{mAs_2}=\frac{D_1^2}{D_2^2}[/tex]
Given that mAs₁ = original mAs = 40 mAs, D₁ original distance = 60 in, D₂ = new distance = 40 in, mAs₂ = new mAs
[tex]\frac{mAs_1}{mAs_2}=\frac{D_1^2}{D_2^2}\\\\mAs_2=\frac{mAs_1*D_2^2}{D_1^2}=\frac{40*40^2}{60^2}=17.8\\\\mAs_2=17.8\ mAs[/tex]
An inquisitive physics student and mountian climber climbs a 43.6 m cliff that overhangs a calm pool of water. He throws two stones vertically downward, 1.35 s apart and observes that they cause a single splash. The first stone has an initial velocity of 1.8 m/s. How long after release of the first stone do the two stones hit the water
Answer:
Explanation:
What we are basically looking for here is how long it takes the first stone to hit the water. We have everything we need to figure that out. We will use the equation
Δx = . Filling in, we will solve for t, the time is takes the first stone to hit the water (which is the same for both since they both hit the water at the same time):
which is a quadratic that we will have to factor. Get it into standard form, setting it equal to 0:
and factor to get that
t = 3.2 s and t = -2.8 s
Since time can't ever be negative, it takes 3.2 s for the stones to hit the water.
A box has a mass of 4kg and surface area 4m². Calculate the
pressure exerted by the box on the floor.
Answer:
10 pa
Explanation:
4kg* 10 (or 9.8m/s2) = 40
40N /4m2 =10
10. If the mass of the Earth is... increased by a factor of 2, then the Fgrav is ______________ by a factor of _______. ... increased by a factor of 3, then the Fgrav is ______________ by a factor of _______. ... decreased by a factor of 4, then the Fgrav is ______________ by a factor of _______.
Answer:
If the mass of the Earth is increased by a factor of 2, then the Fgrav is increased by a factor of 2.
If the mass of the earth is increased by a factor of 3, then Fgrav is increased by a factor of 3.
If the mass of the earth is decreased by a factor of 4, then the Fgrav is decreased by a factor of 4
Explanation:
In order to solve this question, we must take into account that the force of gravity is given by the following formula:
[tex]F_{g0}=G \frac{mM_{E0}}{r^{2}}[/tex]
So if the mass of the earth is increased by a factor of 2, this means that:
[tex]M_{Ef}=2M_{E0}[/tex]
so:
[tex]F_{gf}=G \frac{2mM_{E0}}{r^{2}}[/tex]
Therefore:
[tex]\frac{F_{gf}}{F_{g0}}=\frac{G \frac{2mM_{E0}}{r^{2}}}{G \frac{mM_{E0}}{r^{2}}}[/tex]
When simplifying we end up with:
[tex]\frac{F_{gf}}{F_{g0}}=2[/tex]
so if the mass of the Earth is increased by a factor of 2, then the Fgrav is increased by a factor of 2.
If the mass of the earth is increased by a factor of 3
So if the mass of the earth is increased by a factor of 2, this means that:
[tex]M_{Ef}=3M_{E0}[/tex]
so:
[tex]F_{gf}=G \frac{3mM_{E0}}{r^{2}}[/tex]
Therefore:
[tex]\frac{F_{gf}}{F_{g0}}=\frac{G \frac{3mM_{E0}}{r^{2}}}{G \frac{mM_{E0}}{r^{2}}}[/tex]
When simplifying we end up with:
[tex]\frac{F_{gf}}{F_{g0}}=3[/tex]
so if the mass of the Earth is increased by a factor of 3, then the Fgrav is increased by a factor of 3.
If the mass of the earth is decreased by a factor of 4
So if the mass of the earth is decreased by a factor of 4, this means that:
[tex]M_{Ef}=\frac{M_{E0}}{4}[/tex]
so:
[tex]F_{gf}=G \frac{mM_{E0}}{4r^{2}}[/tex]
Therefore:
[tex]\frac{F_{gf}}{F_{g0}}=\frac{G \frac{mM_{E0}}{4r^{2}}}{G \frac{mM_{E0}}{r^{2}}}[/tex]
When simplifying we end up with:
[tex]\frac{F_{gf}}{F_{g0}}=\frac{1}{4}[/tex]
so if the mass of the Earth is decreased by a factor of 4, then the Fgrav is decreased by a factor of 4.
A vehicle starts from rest with a uniform acceleration of 2m/s2.Find the final velocity of the vehicle after covering a distance of 400m
Answer:
40
Explanation:
vi=0
a=2
vf=?
d=400
vf^2=vi^2+2ad
vf^2=0+2×2×400=1600
vf=√1600=40m/s
Satellite technology has allowed us to monitor areas that were once so remote that we had no way of monitoring them. Review the statements and choose the one that best describes how we can use this technology to benefit the environment.
Large ocean liners use satellites to aid in navigation. This type of navigation aid is also used on cruise ships. Using satellites can help these large ships navigate waters during bad storms.
Satellite surveillance can be used to aid in port security. Satellite data can be monitored and evaluated by complex computer systems. These systems can alert officials when something unusual occurs.
Satellite technology allows us to monitor and track the changes in the polar ice sheets. This can help us plan and direct conservation efforts for the animals that depend on polar ice in order to survive.
Satellite surveillance has allowed us to map areas that were previously too remote to observe. This helps developers to locate and choose sites for large resorts.
"Satellite technology allows us to monitor and track the changes in the polar ice sheets. This can help us plan and direct conservation efforts for the animals that depend on polar ice in order to survive."
This is the answer because the other answers don't really tackle helping the environment head-on instead it sorta helps society instead. Since we are looking for the ways satellite tech can help the environment and the polar ice caps is a wonderful example of that...we can conclude that the third answer will most likely be the correct answer for this question
Hope this helped you!!!! :)
a motorcyclist drives from A to B with a uniform speed of 30 km/h and returns back with a speed of 20km/h-¹ find the average speed ?
PLEASE DO IT AS FAST YOU CAN AND NO SCAM ANSWERS OR ELSE I WILL REPORT
Answer:
Average speed = 24 km/h
Explanation:
Let the distance be x.Given the following data;
Uniform speed A = 30 km/h
Uniform speed B = 20 km/h
To find the average speed;
Mathematically, the average speed of an object is given by the formula;
[tex] Average \; speed = \frac {total \; distance}{total \; time} [/tex] ..... equation 1
Total time = TA + TB
[tex] T_{A} = \frac {x}{30} [/tex]
[tex] T_{B} = \frac {x}{20} [/tex]
[tex] Total \; time = \frac {x}{30} + \frac {x}{20} [/tex]
[tex] Total \; time = \frac {5x}{60} [/tex]
Total distance = x + x
Total distance = 2x
Substituting the values into equation 1;
[tex] Average \; speed = \frac {2x}{\frac {5x}{60}} [/tex]
[tex] Average \; speed = \frac {2x*60}{5x} [/tex]
[tex] Average \; speed = \frac {120}{5} [/tex]
Average speed = 24 km/h
1. Use a micrometer to find the thickness of the foil you used. Do your data confirm the measured thickness? Determine the percentage difference between the measured thickness and the thickness you found in your experiment.
Answer:
Yes.
Explanation:
Yes, my data confirm the measured thickness because the micrometer measure precise thickness of any object. If the same instrument and right method is used for the measurement of the thickness of the foil then there is zero difference occur between the measured thickness and the thickness in your experiment so using right method can reduce or eliminate the difference between the measured thickness and the thickness in experiment.
why does a desert cooler cool better than a hot dry day
On a hot dry day, the amount of water vapour present in atmosphere is less. Thus, water present inside the desert cooler evaporates more, thereby cooling the surroundings more. Hence, a desert cooler cools better on a hot dry day.
NEED THIS ASAP
Ariana is accelerating her car at a rate of 4.6 m/s2 for 10 seconds. Her starting velocity was 0 m/s.
What was her final velocity?
0 m/s
2.3 m/s
4.6 m/s
46 m/s
Answer:
46
Explanation:
v = at so 4.6 x 10 = 46
Try working backward from the desired goal to the starting point or current state. This advice describes a
Answer:
heuristic.
Explanation:
Psychology can be defined as the scientific study of both the consciousness and unconsciousness of the human mind such as feelings, emotions and thoughts, so as to understand how it functions and affect human behaviors in contextual terms.
This ultimately implies that, psychology focuses on studying behaviors and the mind that controls it.
A heuristic is an automatic mental shortcut or rule of thumb that avail people the opportunity to make quick and efficient judgement in decision-making process, as well as proffering solutions to a problem. Thus, it allows people to make decisions, pass probability judgement or proffer solutions to problem quickly and efficiently while applying minimal mental effort.
Basically, a heuristic helps an individual to shorten the decision-making time while paying less attention on thinking of his or her next course of action.
Hence, when you're advised to try working backward from the desired goal to the starting point or current state. This advice describes a heuristic.
: Một mặt phẳng vô hạn tích điện đều, mật độ σ = 4.10-9 C/cm2, đặt thẳng đứng trong không khí. Một quả cầu nhỏ có khối lượng 8 g, mang điện tích q = 10-8 C treo gần vào mặt phẳng, sao cho dây treo lúc đầu song song với mặt phẳng. Lấy g = 9,8m/s2. Khi cân bằng, dây treo quả cầu hợp với mặt phẳng 1 góc bằng bao nhiêu?
Answer:
The angle is 16 degree.
Explanation:
A uniformly charged infinite plane, density σ = 4.10-9 C/cm2, is placed vertically in air. A small ball of mass 8 g, with charge q = 10-8 C, hangs close to the plane, so that the string is initially parallel to the plane. Take g = 9.8m/s2 . In equilibrium, by what angle does the string hanging from the ball make an angle with the plane?
Surface charge density, σ = 4 x 10^-9 C/m^2
charge, q = 10^-8 C
mass, m = 0.008 kg
Let the tension is the string is T and the angle is A.
[tex]T sin A = q E....(1)\\\\T cos A = m g .... (2)\\\\Divie (1) by (2)\\\\tan A =\frac{q E}{m g}\\\\tan A = \frac{10^{-8}\times 4\times 10^{-5}}{2\times 8.85\times 10^{-12}\times 0.008\times9.8}\\\\tan A = 0.288\\\\A = 16 degree[/tex]
Mains electricity is an ac supply. Explain the difference between direct and alternating potential difference.
Direct current (DC) is the flow of electric charge in only one direction. It is the steady state of a constant-voltage circuit. Most well-known applications, however, use a time-varying voltage source. Alternating current (AC) is the flow of electric charge that periodically reverses direction.
#LETS STUDY