Consider the half reaction below.

Which statement best describes what is taking place?

Chlorine is losing electrons and being oxidized. Chlorine is losing electrons and being reduced. Chlorine is gaining electrons and being oxidized. Chlorine is gaining electrons and being reduced.

Explanation:

According to the periodic table, it has 6 valance electrons in its outermost shell of an atom. so, the valancy must be 2.

we usually subtract the valancy from 8 to no. of electrons if no. of electrons in its outermost shell is more than 5.

so, 8-6=2

is the valancy of sulpher here.

Answer:

neutrons :

Explanation:

Protons are positively charged, while electrons are negatively charged. Neutrons are electrically neutral, as the name suggests. The electric charge, noted Q , is a physical quantity.

Answer:

D- Assertion is false and Reason is true

Explanation:

Precipitation is said to have occurred when an insoluble product is formed from soluble ones. Let us take an instance;

BaCl2(aq) + H2SO4(aq) -------> BaSO4(s) + 2HCl(aq)

The barium sulphate so formed is an insoluble product obtained from the reaction of soluble barium chloride and sulphuric acid. This is a typical example of a double replacement reaction as the both ions exchanged partners.

Thus, the assertion is false but the reason is true.

Answer:

Explanation:

Note

I'm using rounded numbers. Every periodic table is different. Use yours to correct my approximations.

1 mole of NH3

N =       14

H = 1

3 H =     3

==========

1 mole = 17 grams

Number of moles in 25 grams

moles = given mass / molar mass

moles = ???

given mass = 25 grams

molar mass = 17 grams

n = 25/17

n = 1.47 moles

Explanation:

Cyclopropane is a cycloalkane conposed of three carbon atoms to form a ring. It has a rols as an inhalation anaesthetic. It is a cycloalkane and a member of cyclopropanes.

Answer:

Alkane

Explanation:

answer is 20

explanation: total Pressure = 205

partial pressure of N = 143

partial pressure of He = 41

total pressure = partial pressure of N + partial pressure of O + partial pressure of He

partial pressure of O = 205 - 185 = 20

Answer:

20

Explanation:

Answer:

ionic compounds

Explanation:

just finished ap chem

Answer:

An ionic compound can act as an electrolyte. This is because an electrolyte should allow charges to travel inside it.

e.g = H2SO4, NaCl

Explanation:

Answer:

32. Opcion E

Explanation:

ZO₂ podemos entenderlo como dióxido de Z

1 mol de ZO₂ contiene 1 mol de Z y 2 moles de O₂ por lo que si la masa molar es de 64 g/mol, podemos plantear lo siguiente

Masa de Z + 2 masa de O = 64 g/mol

Sabemos que la masa del oxígeno es 16 g/mol

x + 2. 16 g/mol = 64 g/mol

x = 64 - 32 →  32 g/mol

La masa atómica coincide con la masa molar, por lo tanto la masa atomica de Z es 32.

Considerando la definición de masa molar, la respuesta correcta es la opción E: La masa atómica de Z debe ser 32.

La masa molar es la masa de un mol de una sustancia, la cual puede ser un elemento o un compuesto, esto es, es la relación entre la cantidad de sustancia y su masa.

En otras palabras, la masa molar es la cantidad de masa que una sustancia contiene en un mol.

En la tabla periódica, se puede encontrar la masa molar de los elementos, también llamada masa atómica o peso atómico.  

Para calcular la masa molar de un compuesto, también llamado masa o peso molecular, se debe sumar la masa molar de los elementos del compuesto multiplicado por su cantidad en el compuesto.

Entonces, en este caso, siendo la masa molar del oxígeno (O) 16, y la masa molar del compuesto ZO₂ 64, y denominando x a la masa molar de Z, entonces la masa molar del compuesto puede expresarse como:

x + 2×16= 64

Resolviendo:

x + 32= 64

x=64 -32

x=32

Finalmente, la respuesta correcta es la opción E: La masa atómica de Z debe ser 32.

Aprenda más:

Answer:

The correct option is B

Explanation:

just did it edg 2020.

Answer:

the answer is c

Explanation:

Answer:

Basic

Explanation:

The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.

Acids have many hydrogen ions. Acids have a pH of less than 7.

Bases have fewer hydrogen ions and more hydroxide ions.  Bases have a pH of less than 14.

If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.

The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.

Answer:

9.5 is a base

Explanation:

A ph of less than 7 is an acid

7 is neutral

7 to 14 is a base

9.5 is a base

Explanation:

ascorbic acid is lemon

lemon contain ascorbic acid....

it is organic acid.....

Answer:

The correct option is;

The reaction pathway for the trials is different

Explanation:

The effect of a catalyst in a chemical reaction is to increase the rate of a reaction by changing the pathway or mechanism of the reaction and/or to lower the transition state's energy thereby lowering the activation energy of the reaction

The pathway of the reaction is changed by the catalyst by the formation of intermediate compounds by the catalyst which require lower activation energy to form the products than the original non-catalyzed reactants. In the process the catalyst is regenerated, thereby, not taking part in the reaction.

Answer:

Ankara is the capital of Turkey! Hope this helped you out! :)

Explanation:

The capital of Turkey is Ankara

hopefully this helped :3

Answer:

when the coal is heat with presence of oxygen it's called combustion...

Answer:

volume = 13097674418.528dm³

Explanation:

n = (3.52)*10^32/(6.02)*10^23)

n = (584717607.97)

n = volume /molar volume

molar volume at stp = 22.4dm³

volume= 584717607.97 x 22.4

volume = 13097674418.528dm³

Answer: I just took the test, the answer is A.

Explanation:

Answer:

See explanation

Explanation:

Charles law gives the relationship between volume and temperature of a gas. Charles law States that, the volume of a given mass of gas is directly proportional to its temperature at constant pressure.

Theoretically, it is assumed that when the absolute zero temperature has been achieved, the volume of any ideal gas will be found to be equal to zero. If the volume of the gas is zero, it now implies that all molecular motion will be stopped. This does not happen in real gases as all gases are found to condense to solids or liquids when this temperature is exceeded.

When volume is plotted against temperature, volume of the gas approaches zero at t = −273.15 °C, which is the x-intercept of the Charles law graph. Below this temperature, we can only get negative values of volume which does not exist hence, −273.15 °C is the lowest attainable temperature also known as the absolute zero.

Answer:

A. increased competition for resources

Explanation:

Answer:

The patient requires a dose of 107.2 mg of gentamicin

Explanation:

A dosage of 1.75 mg per Kilogram body weight results in blood serum levels of 4.5 mcg/mL

This means that; 1.75 mg/ kg = 4.0 mcg/mL

Therefore, dosage of gentamicin in  mg/kg that will result in 4.5 mcg/mL blood serum level = (1.75 mg/Kg * 4.5 mcg/mL) / 4.0 mcg/mL

Dosageof gentamicin = 1.97 mg/Kg

1-lb = 0.453592 Kg

Weight of 120-lb patient in Kg = 120 * 0.453592 = 54.43 Kg

Dose in mg required by patient = 1.97 mg/Kg * 54.43 Kg = 107.2 mg

Therefore, the 120-lb patient requires a dose of 107.2 mg of gentamicin to result in a blood serum level of 4.5 mcg/mL

Answer:

The thermal decomposition of ammonium nitrate to produce dinitrogen monoxide and water. This reaction takes place at a temperature of 200-260°C.

Answer:

Explanation:0.493 M NaOH means 0.493 mol NaOH/L

mols

mols = ------ x L

L

mols = M x V

In a titration procedure, 40.57 mL of 0.493 M NaOH solution was used. How many mols NaOH did this volume of NaOH solution contain?

mols = M x V

0.493 mols NaOH

mols = ----------------------- x 0.04057 L

L

mols = 0.0200 mols NaOH

Answer:

Tyndall Effect is the phenomenon of scattering of light by particles in a colloid or in a very fine suspension.

Starch solution would show Tyndall effect.

N/B: Heterogeneous mixtures show Tyndall effect.

Answer:The Tyndall effect is light scattering by particles in a colloid or in a very fine suspension. Also known as Willis–Tyndall scattering, it is similar to Rayleigh scattering, in that the intensity of the scattered light is inversely proportional to the fourth power of the wavelength, so blue light is scattered much more strongly than red light. An example in everyday life is the blue colour sometimes seen in the smoke emitted by motorcycles, in particular two-stroke machines where the burnt engine oil provides these particles.

Under the Tyndall effect, the longer wavelengths are more transmitted while the shorter wavelengths are more diffusely reflected via scattering. The Tyndall effect is seen when light-scattering particulate matter is dispersed in an otherwise light-transmitting medium, when the diameter of an individual particle is the range of roughly between 40 and 900 nm, i.e. somewhat below or near the wavelengths of visible light (400–750 nm).

It is particularly applicable to colloidal mixtures and fine suspensions; for example, the Tyndall effect is used in nephelometers to determine the size and density of particles in aerosols and other colloidal matter (see ultramicroscope and turbidimeter).

It is named after the 19th-century physicist John Tyndall.

Explanation:

Answer:

Explanation:

20% of C2H6O2 

since its a solution, this means that it has 20g of ethylene glycol and the rest is water.

Molar mass of C2H6O2 = (12 x 2) + (1 x 6) + (2 x 16)

                                        = 62

mole = mass/molar mass

Moles of C2H6O2 = 20/62

                               = 0.322 mol

Moles of water = 80/18

                         = 4.444 mol

mole fraction = mol of solute / tatal mol of solution

Mole fraction of ethylene glycol = 0.322/(0.322 + 4.444)

                                                      = 0.068

Mole fraction of water = 1 - 0.068

                                     = 0.932

Answer:

an atom or molecule with a net electric charge due to the loss or gain of one or more electrons

Explanation:

Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.

Answer:

pH and pOH denote the negative log of the concentration of hydrogen or hydroxide ions. High pH means that a solution is basic while high pOH means that a solution is acidic. ... So here the basic definition of pH is that it's equal to negative log base 10 of the concentration of protons in your solution.

pH and pOH are inversely proportional to one another i.e. as one increases, the other decreases and vice versa.

pH and pOH are terms used to measure the level of acidity or alkalinity of a substance.

A basic solution has a pOH less than 7, while an acidic solution has a pOH greater than 7.

On the other hand, a basic solution has a pH greater than 7 while an acidic solution has a pH lesser than 7.

Therefore, it can be said that pH and pOH are related inversely i.e. as one decreases, the other increases.

Learn more about pH at: https://brainly.com/question/15289741

#SPJ9

Answer:

[tex]\boxed{\mathrm{view \: explanation}}[/tex]

Explanation:

This is an irreversible reaction, we cannot derive any [tex]\mathrm{K_c}[/tex] expression for it. The [tex]\mathrm{K_c}[/tex] expression can only be derived for reversible reactions and not irreversible reactions. We cannot derive the [tex]\mathrm{K_c}[/tex] expression for this reaction.

Answer:

D. Pressure

Explanation:

The rate of a reaction is defined as the speed at which the reactants are converted into products. Factors influencing the rate of a reaction are concentration, catalyst, temperature, surface area,  and pressure, etc.

In case of the reaction rate of gases, pressure will only have its affect as pressure do not have any influence on solid and liquid.

While concentration, surface area and catalyst influence all reaction rates including solid, liquids and gases.

Hence, the correct option is (d) pressure.

Answer:

518.52K

Explanation:

Charles law, which describes the direct relationship between the volume and the temperature of a gas when the pressure is constant, will be used for this question. The Charles law equation is:

V1/T1 = V2/T2

Where; V1 is the volume of the gas at an initial state (Litres)

T1 is the absolute temperature of the gas at an initial state (Kelvin)

V2 is the volume of the gas at a final state (Litres)

T2 is the absolute temperature of the gas at a final state (Kelvin)

According to the question, V1 = 2.3L, T1 = 25°C, V2 = 4L, T2 = ?

We need to convert the temperature to the absolute temperature unit in Kelvin (K) i.e.

T(K) = T(°C) + 273.15

T(K) = 25°C + 273.15

T1 (K) = 298.15K

To find for T2 in the equation, we make T2 the subject of the formula:

T2 = V2 × T1 / V1

T2 = 4 × 298.15 / 2.3

T2 = 1192.6/2.3

T2 = 518.52

Thus, the temperature must be heated to 518.52K in order to expand to a volume of 4L. This answer is in accordance to Charles law that the volume increases with increase in temperature and vice versa.