D) All atoms of a given element must 3. Which statement concerning elements is true? A) electron and neutron B) electron and positron C) proton and electron D) proton and neutro nir mass unit?c
​

By unit conversion the density of 7.2gmL is equal to 7.2 kg/L.

Here given, the density = 7.2 g/mL

Since,

We know that,

1g = 0.001 kg a

And also,

1mL = 0.001L

Now, let's convert 7.2 g/mL to kg/L:

7.2 g/mL x 1kg/1000g x 1000mL/1L

= 7.2 kg/L

As a result, by the unit conversion the density 7.2 g/mL is converted to  7.2 kg/L.

To learn more about unit conversion refer to :

https://brainly.com/question/13016491

#SPJ1

The number of neutrons in an atom varies and can be determined by the atomic number of the element. The atomic number is the number of protons in the nucleus of an atom and defines the element. The number of neutrons can be calculated by subtracting the atomic number from the mass number, which is the total number of protons and neutrons in the nucleus.

For example, the most common isotope of carbon has 6 protons and 6 neutrons, so its atomic number is 6 and its mass number is 12. The number of neutrons in this isotope of carbon is 12 - 6 = 6.

You can learn more about neutrons at

https://brainly.com/question/26952570

#SPJ4

Generally, ionic liquids (ILs) are composed of cations and anions, and their melting points are generally below 100°C. Ionic-liquid-based extraction is defined as a novel separation method, which applies ILs as diluents and/or extractants for solvent extraction.

Seawater desalination plays an important role in addressing the global water shortage challenge. Directional Solvent Extraction (DSE) is one of the emerging non-membrane desalination technology that features the ability to utilize very low temperature waste heat (as low as 40 °C).

This process is enabled by the subtly balanced solubility properties of directional solvents, which do not dissolve in water but can dissolve water and reject salt ions.

The given question is incomplete and the complete question is given below.

"Ionic liquid enables highly efficient low temperature desalination by directional solvent extraction", Justify the statement.

Learn more about desalination from the link given below.

https://brainly.com/question/29348726

#SPJ4

According to a mole, an atom is A particle that matter that specifically specifies a chemical element is like an egg to a dozen and like a goose to a gaggle.

The correct answer is D

Atoms are a particular kind of material particle that make up a chemical element. The core nucleus of an atom is surrounded by electrons that are either positively charged or negatively charged in large numbers. The positive charges nucleus, which is composed of two comparatively large particles called protons and neutrons, may exist.

The positively and negatively charged protons and neutrons that make up the majority of atoms are encircled by a cloud of negatively charged electrons. At its most basic level, an atom would be any particle of stuff.

To know more about atom  visit:

https://brainly.com/question/26416088

#SPJ1

The cell potential is  - 0.00072V

The Nernst equation is an electrochemical equation that describes the voltage (electromotive force) produced by a galvanic cell, as a function of the cell potential relative to its standard state, temperature and the activities of the reactants and products

If we apply the Nernst equation to the problem that we have here and then we try to obtain the cell potential of the cell as we can see in the image that have been shown in the attachment then we would have that;

Ecell =Eocell - 0.0592/2 logQ

Then;

Ecell = 0 - 0.0592/2 log(0.811/0.858)

Ecell =  - 0.00072V

Learn more about Nernst equation:https://brainly.com/question/13043546

#SPJ1

The molar mass of the solute is 163 g/mol.

Molar mass can be defined as the mass in grams of one mole of a substance. The units of molar mass are grams per mole abbreviated as g/mol.

The molar mass of the solute can be calculated using the equation:

ΔTf = Kf * molality

molality = ΔTf / Kf

molality = 5.1 / 5.12

molality = 0.99 g/mL

Since the molality is the number of moles of solute per 1 kilogram of solvent, we can find the number of moles of solute in 14.3 g of benzene.

n = molality * (14.3 g) / 1000 g/kg = 0.014 moles

The molar mass of the solute can be calculated as:

molar mass = (2.3 g) / (0.014 moles) = 163 g/mol.

Learn more about molar mass here: brainly.com/question/22503632

#SPJ1

A polarimeter fundamental working principle entails the following: By passing light via a polarizer, one can produce light with a precisely prepared linear polarisation state.

To learn more about polarimeter refer to:

https://brainly.com/question/14687806

#SPJ1

Muscle-generated L-lactic acid travels through the bloodstream to the liver and from the cytosol to the mitochondria. In the matrix, L-lactate metabolism leads to pyruvate (PYR) via m-L-LDH and then to oxaloacetate (OAA) and malate (MAL) produced by mitochondria via three putative .

Lactate is oxidized to pyruvate by lactate dehydrogenase. Pyruvate is transported to mitochondria and converted to oxaloacetate by fermentation (anaerobic breakdown of glucose) by pyruvate carboxylase (produced in liver, muscle cells, red blood cells, etc.). It is formed during strenuous exercise when the body breaks down glucose without oxygen. Lactic acid is converted to pyruvate by the enzyme lactate dehydrogenase.

Colycycle and alanine cycle.

In the Coli cycle, glucose is metabolized to pyruvate in muscle and then to lactate, which is released into the blood and transported to the liver where it is converted to pyruvate and used for gluconeogenesis, resulting in The resulting glucose is released back to the muscle.

Read more about acid;

https://brainly.com/question/25148363

#SPJ4

Answer: photosynthesis

Explanation:

Answer:

The chemical reactions which occurs by absorption of heat are called endothermic reactions.

Examples : Melting of ice cubes.

Explanation:

Melting solid salts.

N2(g) + O2(g) + heat = 2NO(g)

So,

N= Nitrogen

O= Oxygen

NO= Nitric

All the given combinations results in ionic compounds by electron donating from metals. The compound formed between sodium and chlorine is NaCl and that of magnesium and oxygen is MgO.

Ionic compounds are formed between metals and non-metals. Metals are electron rich and will easily loss electrons to electron deficient nonmetals.

Sodium chloride or NaCl is formed by donating one electron from the sodium metal to the chlorine atom. Similarly magnesium donates its two valence electrons to oxygen forming MgO.

The valency of both Al and N is 3. Al donates its 3 electron to N and forms aluminum nitride AlN.

Similarly, potassium and sulphur forms potassium sulphide K₂S, where, each potassium metal donates one electron to sulphur atom.

Find more on ionic compounds:

https://brainly.com/question/29005103

#SPJ1

Answer:

2ClO2 + H2O → HClO2 + HClO3

Explanation:

pls tell me if wrong have a good day/night<3

The number of chlorine atom on left is 1 while on right side is 2. The balanced equation is 2ClO[tex]_2[/tex]+ H[tex]_2[/tex]O → HClO[tex]_2[/tex] + HClO[tex]_3[/tex]

An equation per a chemical reaction is said to be balanced if both the reactants or the products have the same number of atoms and total charge for each component of the reaction. In other words, each side of the reaction have an equal balance of mass and charge. The components and outcomes of a chemical reaction are listed in an imbalanced chemical equation, but the amounts necessary to meet the conservation of mass are not specified.

The skeletal equation is  ClO[tex]_2[/tex]+ H[tex]_2[/tex]O → HClO[tex]_2[/tex] + HClO[tex]_3[/tex]

The number of chlorine atom on left is 1 while on right side is 2. Multiply the reactant by 2. The balanced equation is 2ClO[tex]_2[/tex]+ H[tex]_2[/tex]O → HClO[tex]_2[/tex] + HClO[tex]_3[/tex]

To know more about balanced equation, here:

https://brainly.com/question/7181548

#SPJ6

Answer:

If it's liquid, this is the total volume:300+100= 400 cm3

Explanation:

CH4 + 2O2 –––> CO2 + 2 H2O

100 . . 500. . . . . . 0 . . . . . .0. . . (initial)

100. . . 200 . . . 100 . . . . .200 . . (reaction)

0. . . . 300 . . . 100 . . . . . 200 . .(final)

H2O can be either gas or liquid. If it is gas, this is the total volume of gases : 300 + 100 + 200 = 600 cm3

If it's liquid, this is the total volume:300+100= 400 cm3

Three statements regarding autotrophs and heterotrophs on Earth that true are:

The other statements are incorrect. The following are the rationales:

The statements that are true are 4, 5, and 8, as heterotrophs are dependent on autotrophs for the generation of O2 to support aerobic respiration and the conversion of light energy to chemical energy, and the majority of autotrophs on Earth require aerobic respiration in order to survive.

This question should be provided as:

Which three of the following statements about autotrophs and heterotrophs on Earth are true?

Learn more about autotrophs here: brainly.com/question/16989903

#SPJ4

Using standard thermodynamic data at 298K, the entropy changes of the environment when 1.59 mol of P₄O₁₀ (s) is irritated at standard conditions is - 45339.5 J/K

∆H°f product is the total enthalpy of standard formation based on the product substances. ∆H°f reactants is the total enthalpy of the standard formation based on the reactants.

We know:

∆H⁰f (P₄O₁₀) = - 2984 KJ/mol

∆H⁰f (H₂O) = - 285.8 KJ/mol

∆H⁰f (4H₃PO₄) = - 1288.3 KJ/mol

The e reaction is:

                               P₄O₁₀ (s) + 6H₂O (l) → 4H₃PO₄ (aq)

∆H⁰rxn = ∆H⁰f  products - ∆H⁰f  (reactants)

∆H⁰rxn = [4∆H⁰f (P₄O₁₀)] - [1 ∆H⁰f (P₄O₁₀) + 6 ∆H⁰f (H₂O)]

∆H⁰rxn = [4(- 1288.3)] - [ 1(- 2984) + 6(- 285.8)]

∆H⁰rxn = [ - 5153.2] - [ -11936 - 1714.8]

∆H⁰rxn = [- 5153.2] - [-13650.8]

∆H⁰rxn = - 5153.2 + 13650.8

∆H⁰rxn = 8497.6 KJ

Therefore, ∆H⁰rxn for this reaction is + 8497.6 KJ.

From the above-balanced chemical equation, we can write,

For the reaction of 1 mol of P₄O₁₀,

∆H⁰rxn value = + 8497.6 KJ

Then, for the reaction of 1.59 mol of P₄O₁₀, ∆H0rxn value

= + 8497.6 KJ/1 mol x 1.59 mol

= + 13511.184 KJ

We know,

∆S⁰surroundings = - ∆H⁰rxn/ T

Where,

∆S⁰surroundings = standard entropy changes of the surroundings

∆H⁰rxn = standard enthalpy changes of the reaction

T = temperature in Kelvin

Here,

∆H0rxn = 13511.184 KJ = 13511.184 x 10³ J = 13511184 J

T = 298 K

Now,

∆S⁰surroundings = - ∆H⁰rxn/ T

∆S⁰surroundings = - 13511184J/298 K

∆S⁰surroundings = - 45339.5 J/K

Therefore, the entropy changes for the surroundings when 1.59 mol of P₄O₁₀ reacts at standard conditions is - 45339.5 J/K

Learn more about the entropy at https://brainly.com/question/6364271

#SPJ1

In this reaction, two bonds are broken and two new bonds are formed.

Exothermic combustion occurs when octane or methane are used; It gives off energy. CH4 + 2 oxygen + CO2 + 2 water + energy The products have lower energies than the reactants.

Take, for instance, the reaction: 2Mg(s)+O2(g)2MgO(g): The reactant and product sides contain two oxygen atoms and two magnesium atoms in this reaction. As a result, the chemical reaction is a balanced chemical equation because it complies with the law of conservation of mass.

To know more about bonds visit :-

https://brainly.com/question/10777799

#SPJ1

To find the total amount of amoxicillin given over 11 days, we can use dimensional analysis.

   Start by identifying the known quantities: 2 tablets per day and 375 mg per tablet.

   Next, identify the unknown quantity: the total amount of amoxicillin given over 11 days (in mg).

   Write the equation using the known quantities and the unknown quantity:

   (2 tablets/day) x (375 mg/tablet) x (11 days) = unknown quantity

   Use the units to cancel out units and get the final result:

   2 x 375 x 11 = 8250 mg

So, over 11 days, the patient will receive 8250 mg of amoxicillin.

Answer:

I'm pretty sure it's B but I'm not sure

Explanation:

According to the forces of attraction, dispersion forces are a type of van der waals forces.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

Learn more about forces of attraction,here:

https://brainly.com/question/10957144

#SPJ1

The strongest intermolecular interactions between hydrogen sulfide (H2S) molecules arise from dipole-dipole forces.

Sodium sulphide:

It is a peculiar chemical substance that emits a deadly gas and is highly combustible, corrosive, and toxic. At low concentrations, it smells like rotten eggs. It is created when organic material undergoes microbial decomposition in the absence of oxygen. It can be found in natural gas, crude oil, sewage, and other places.

Molecule-to-molecule force:

The electrostatic force of attraction between the molecules is what causes the intermolecular forces to exist. Ionic forces (ion to ion forces and ion to an induced dipole forces), dipole-dipole forces (hydrogen bonding, permanent dipole-permanent dipole, and permanent dipole-induced dipole forces), and Van der Waals forces are three different forms of intermolecular forces (induced dipole to induced dipole).

Strongest intermolecular hydrogen sulphide force:

The London dispersion force and the London scattering force are two of the weakest forces, and it is known to emphasise the dipole-dipole interaction. Due to the substantial difference in electronegativity between hydrogen and sulphur, their bond is polar. As a result, dipole-dipole interactions are what happen between molecules.

For more such questions on dipole-dipole forces, Refer:

https://brainly.com/question/9929584

#SPJ4

Steve's peak speed in kilometers per hour is 3.9204 km/h.

Speed is the rate of motion or action, specifically the magnitude of the velocity.

Speed is the rate distance is traversed in a given time. According to this question, Steve races to the nearest taco stand at lunchtime and sees that his pedometer recorded his peak speed at 108.9 cm/s.

Unit of speed in centimetres per second can be converted to kilometre per hour as follows:

1 centimetre per second = 0.036 kilometre per hour

108.9cm/s = 3.9204 km/h

Learn more about speed at: https://brainly.com/question/28739596

#SPJ1

Sulfur-tethered methylene bridge-junction (STMBJ) thiol methyl anchors are a type of chemical compound that is synthesized by attaching a methylene bridge to a sulfur atom through a thiol group.

These compounds are characterized by the presence of a sulfur atom, which acts as a tether, and a methylene bridge, which serves as a junction between the sulfur atom and the thiol group. They are used in organic synthesis as anchoring groups for various reactions and for the preparation of compounds with specific properties.

The synthesis of STMBJ thiol methyl anchors involves the use of chemical reactions, such as the reaction between a thiol and a carbonyl compound.

The characterization of these compounds is typically carried out using techniques such as infrared spectroscopy, nuclear magnetic resonance spectroscopy, and mass spectrometry.

The application of STMBJ thiol methyl anchors in organic synthesis is in the preparation of compounds with specific properties and in the design of new chemical reactions.

You can learn more about  thiol group at

https://brainly.com/question/11200318

#SPJ4

The conjugate base of the specie HS^- is S^-

We know that form the Bronsted Lowry perspective of the acid and the base, the acid is the substance that can be able to give out a proton while the base is the kind of substance that can be able to accept a proton.

We can see here that the conjugate base is the specie that can be obtained by the loss of a proton from the HS^- as such we would have it as S^-.

Hence, we can see that the base that is the conjugate base in this sense is S^-.

Learn more about conjugate base:https://brainly.com/question/30225100

#SPJ1

The time that is taken  is obtained as 5.21 × 10⁻⁵ s.

For the zero order reaction that we have, we can see that;

rate = 24.00 × 10²⁵ M/s

From the integrated rate law:

[C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

We now obtain the half life as;

t(1/2) = [C₂H₅OH]₀ / 2 × k

t(1/2) = (1.25 × 10²² M) / 2 × (24.00 × 10²⁵ M/s) = 2.60 × 10⁻⁵ s

The time that is required is now obtained as;

[C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

0 M = 1.25 × 10²² M - 24.00 × 10²⁵ M/s × t

t = 5.21 × 10⁻⁵ s

The rate constant for the decomposition of ethanol on an alumina surface is 24.00 × 10²⁵ M.

The integrated rate law is: [C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, the half-life is 2.60 × 10⁻⁵ s.

The time required for all the 1.25 × 10²² M C₂H₅OH to decompose is 5.21 × 10⁻⁵ s.

Learn more about zero-order kinetics here: brainly.com/question/13314785

#SPJ1

Out of the elements listed (Cs, Ag, Pb, Br, Se), the element with the largest atomic radius is Cs (cesium).

The largest atomic radius refers to the size of an atom, which is determined by the distance between the nucleus and the outermost electrons.

Key points:

Learn more about atomic radius here:

https://brainly.com/question/15255548

#SPJ4

Carbohydrates are organic molecules composed of carbon, hydrogen, and oxygen atoms.

They are a class of biomolecules which are essential to life on Earth, as they are the primary source of energy for cellular processes.

Carbohydrates can be divided into two categories:

These carbohydrates can provide energy, structure, and protection to cells, and they play an important role in many biological processes.

Learn more about Carbohydrates:

https://brainly.com/question/336775

#SPJ4

Empirical formula is SO3 with one sulfur atom and three oxygen atoms.

Empirical formula is the chemical formula of compound that gives proportions (ratios) of the elements present in compound but not the actual numbers or arrangement of atoms.

For sulfur: 40.0% of 100 g = 40 g = 40 / 32 mol = 1.25 mol

For oxygen: 60.0% of 100 g = 60 g = 60 / 16 mol = 3.75 mol

The ratio of the number of moles of sulfur to the number of moles of oxygen is 1.25 mol / 3.75 mol = 1/3.

The empirical formula is therefore SO3 with one sulfur atom and three oxygen atoms.

To know more about empirical formula, refer

https://brainly.com/question/1603500

#SPJ1

The correct answer is d) Energy flows through an ecosystem, but chemicals cycle within it. This is because energy is transferred through the food chain and is converted into chemical energy by the organisms, while chemicals cycle through the ecosystem as they are recycled by the organisms.

Energy is transferred from one organism to another through the food chain, as one organism consumes another. This energy is then converted into chemical energy, which is used by the organism for its metabolic processes.

The chemicals used in these processes are then recycled through the ecosystem, as they are taken up by other organisms and eventually returned to the environment. This cycle of energy and chemicals is essential for the functioning of an ecosystem and for maintaining balance within the environment.

Learn more about Energy:

https://brainly.com/question/8101588

#SPJ4

Rounding to the nearest half-ounce, the answer is 8 oz to two significant figures.

Generally, We are given:

1 cup = 8 oz

1 fluid oz = 29.7 mL

So, 1 cup = 8 fluid oz

= 8 * 29.7 mL

= 237.6 mL

To find the number of ounces of water measured using the measuring cup, we divide the volume in mL by the conversion factor from mL to oz:

237.6 mL / 29.7 mL/oz = 8 oz

Read more about volume

https://brainly.com/question/13338592

#SPJ1