define acceleration what it's formula​

Answer:

All the sides and inner angles of a regular form must be equal. The sides and angles of an irregular form aren't the same. An equilateral triangle, for example, is a regular form because all of its sides and angles are the same length.

OAmalOHopeO

Answer:

Explanation:

If you multiply the number of watts by the number of seconds, you'll end up with joules. 

Answer:

the acceleration of the elevator is increasing

Explanation:

For this exercise we propose the solution using Newton's second law

         F -W = m a

         F = m (g + a)

If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.

Explanation:

when the distance between the 2 objects is halved, the gravitational force between the 2 objects is doubled. when the distance between the 2 objects is doubled then the gravitational force doubles.

Answer:

a) pressure means force acted on a body per unit area

Answer:

9.78 m/s^2

Explanation:

Acceleration due to gravity at equator is 9.78m/s^2

Coulomb, unit of electric charge in the metre-kilogram-second-ampere system, the basis of the SI system of physical units. ... The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.

Mark me as brainliest....

Answer:

The second throw shows both accuracy and precision.

Explanation:

The second throw shows both accuracy and precision because he knew in which degree and the amount of force that can be applied to the dart so that it hits the center of the bullseye or close to it. Due to knowing of these two things the Carlos is able to hit the dart close to the target at the second time so in this way he got both accuracy and precision at the second turn of throwing darts.

Answer:

B-The second throw shows accuracy but poor precision.

Explanation:

Answer:

2.82 m/s²

Explanation:

[tex]v = u + at \\ 24 = 0 + a(8.5) \\ a = 2.82 \: ms {}^{ - 2} [/tex]

The acceleration of a motorcycle is 2.82 m/s^2.

Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.

Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration for all other motions.

Given that:

Initial velocity of the motor cycle: u = 0 m/s.

Final velocity of the motorcycle = 24 meter/second.

Time taken to reach this velocity = 8.5 second.

Hence, acceleration of the motor cycle = change in velocity/time interval

= ( final velocity - initial velocity)/time interval

= ( 24 m/s  - 0 m/s)/8.5 s

= 2.82 m/s^2.

Its acceleration is 2.82 m/s^2.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ2

Answer:

C: the process by which stars create the heavier elements

Explanation:

Stellar nucleosynthesis is defined as the process of nuclear fusion by which heavier elements are formed within stars by from the combination of protons and neutrons gotten from the nuclei of lighter elements.

Looking at the options, the correct one is Option C

Answer:

Deductive

Explanation:

Deductive reasoning or logic is the form of logic where the reasoning process from which the conclusion is reached is based on one or more premises. Deductive logic, is a top down logic, where premises are linked with conclusion, such that true premises give a true conclusion which is reached by a process of narrowing the focus based on certainty

The question bases the conclusion on the premise that the Big Bang theory which is based on scientific evidence is several billions of years old and if the theory is correct the universe (as it is today) was not created six days

Answer:

same value because both sides are equal

Explanation:

equal value

Answer:

Burning paper

Explanation:

The tarnishing of iron is a chemical process, and the only option that is a chemical process is Burning paper

Answer:

Explanation:

Velocity is related to Displacement.

Average velocity = Displacement / Time difference

Answer:6.26*10^-4

Explanation:

The magnetic flux through the loop is 6.255 x 10⁻⁴ Weber.

The number of magnetic field lines passing through a cross-section area defines the magnetic flux. It is denoted by ∅.

∅ = BAcosθ

Given is the magnetic field B = 0.152T, radius r = 0.04m and the angle of orientation θ=35.0 degrees

Area of cross- section A = πr² = 3.14 x ( 0.04)² = 5.024 x 10⁻³ m²

Magnetic flux, ∅ =  0.152 x  5.024 x 10⁻³ x cos 35°

∅ = 6.255 x 10⁻⁴ Weber

Thus, the magnetic flux through the loop is 6.255 x 10⁻⁴ Weber.

Learn more about magnetic flux.

https://brainly.com/question/24214683

#SPJ2

Answer: H2CO3

Explanation:

Answer:

a) Watt is a derived unit because it's not a “base unit.”

b) The atomic clock is suitable for measuring time because natural atomic oscillations happen at a higher frequency and as a result they are more stable.

c) There is fluctuation in time measured by a pendulum clock because the pendulum rod changes in length slightly with changes in temperature, causing changes in the rate of the clock. An increase in temperature causes the rod to expand, making the pendulum longer, so its period increases and the clock loses time.

D) The weight of an object is more at pole and less at equator of the earth because the distance of the pole is less than the distance of the equator from the centre of the earth.

e) The weight of an object on the moon is about one-sixth the weight it would have on the earth because the moon's gravitation force is determined by the mass and the size of the moon. Hence, the weight of an object on the moon is 1/6th its weight on the earth.

Answer:

Time = 16.667 seconds

Explanation:

Given the following data;

Distance = 50 meters

Velocity = 3 m/s

To find the time it will take;

Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.

Mathematically, velocity is given by the equation;

Velocity = distance/time

Making time the subject of formula, we have;

Time = distance/velocity

Time = 50/3

Time = 16.667 seconds

Answer:

a. Potential energy is highest at Part A

The kinetic energy is highest at Part C and Part D

b. The potential energy is lowest at Part C and Part D

c. The roller coater has equal amount of potential and kinetic energy at Part B, Part D and part F

2) Yes, the mechanical energy is the same from point A to F according to the first law of thermodynamics

Explanation:

The total mechanical energy is constant where the roller coaster moves by only the initial velocity, and the the force of gravity

Total mechanical energy, M.E. = Kinetic energy, K.E. + Potential energy, P.E.

M.E. = K.E. + P.E. = Constant

Therefore, we have;

a. Potential energy is the energy stored in a body, due to its position or elevation, state or arrangement

The higher the elevation, the higher the potential energy, therefore, the highest amount of potential energy is gained when the roller coaster is at the  highest point in the motion = Part A

From M.E. = K.E. + P.E. = Constant, the highest kinetic energy is given at the point the roller coaster has the lowest potential energy, which corresponds with the lowest points = Part C and Part D

b. Potential energy, which is the energy of body due to its position or state is lowest at the lowest points = Part C and Part D

c. The value of potential energy, P.E. due to elevation, can be found as follows

P.E. = Mas, m × Gravity, g × Height, h

Therefore, the potential energy will be half the maximum value where the height, h = (Maximum height)/2 and given that M.E. = K.E. + P.E., the kinetic energy, will increase by the same amount, and we have;

K.E. = P.E. at the half the maximum height of the track = Part B, Part D and part F

2) The mechanical energy is the input energy, which according to the first law of thermodynamics cannot be created and destroyed an it is therefore, constant and it is the same from point A to F

Answer:

Energy is defined as the ability to do work.

Explanation:

Answer:

True

Explanation:

True, atoms create electromagnetic fields that form repulsion to keep them from touching.

Answer:

A. New problem or discovery Engineering solution Development Research Explanation:

A possible  sequence of steps in the research and development cycle are  A. New problem or discovery Engineering solution Development Research​. In the  research and development cycle, the first step is the problem that a scientist observe. After that we have discover a solution for that problem through many research so the above materials are the possible sequence of steps in the research and development cycle.

[tex]speed = \frac{distance}{time} \\ = > \frac{200m}{min} = \frac{1500m}{t} \\ = > \frac{200m}{60s} = \frac{1500m}{t} \\ = > \frac{10m}{3s} = \frac{1500m}{t} \\ = > t = 1500m \times \frac{3s}{10m} \\ = > t = 150 \times 3s \\ = > t = 450s \: [/tex]

This is the answer.

Hope it helps!!

Answer:

Explanation:

This is a recoil problem, which is just another application of the Law of Momentum Conservation. The equation for us is:

[tex][m_av_a+m_ev_e]_b=[m_av_a+m_ev_e]_a[/tex] which, in words, is

The momentum of the astronaut plus the momentum of the piece of equipment before the equipment is thrown has to be equal to the momentum of all that same stuff after the equipment is thrown. Filling in:

[tex][(90.0)(0)+(.50)(0)]_b=[(90.0)(v)+(.50)(-4.0)]_a[/tex]

Obviously, on the left side of the equation, nothing is moving so the whole left side equals 0. Doing the math on the right and paying specific attention to the sig fig's here (notice, I added a 0 after the 4 in the velocity value so our sig fig's are 2 instead of just 1. 1 is useless in most applications).

0 = 90.0v - 2.0 and

2.0 = 90.0v so

v = .022 m/s This is the rate at which he is moving TOWARDS the ship (negative was moving away from the ship, as indicated by the - in the problem). Now we can use the d = rt equation to find out how long this process will take him if he wants to reach his ship before he dies.

12 = .022t and

t = 550 seconds, which is the same thing as 9.2 minutes

Answer: The HUMAN EYE

Explanation:

The human eye is made up of different parts which ranges from controlling the amount of light that enters the eye to the focusing of the image that is formed. The camera is a device which is both mechanically and electronically operated which shares a number of similarities with the eye.

In the human eye, the IRIS helps to regulate the amount of rays passing through the pupil to the lens by either contracting or dilating in light or dark environment respectively. While in the camera, the DIAPHRAGM controls the amount of light entering the camera.

The PUPIL serves as the passage for light into the eye while in the camera, the APERTURE does the same.

The photosensitive surface in the eye is the YELLOW SPOT while in the camera, the photosensitive surface is the PHOTOGRAPHIC FILM.

Answer:

r = 41.1 10⁹ m

Explanation:

For this exercise we use the equilibrium condition, that is, we look for the point where the forces are equal  

                  ∑ F = 0

                  F (Earth- probe) - F (Mars- probe) = 0

                  F (Earth- probe) = F (Mars- probe)

Let's use the equation of universal grace, let's measure the distance from the earth, to have a reference system

the distance from Earth to the probe is        R (Earth-probe) = r

the distance from Mars to the probe is        R (Mars -probe) = D - r

where D is the distance between Earth and Mars

                 [tex]G \ \frac{m \ M_{Earth}}{r^2} = G \ \frac{m \ M_{Mars}}{(D-r)^2}[/tex]

                 M_earth (D-r)² = M_Mars r²

                 (D-r) = [tex]\sqrt{ \frac{M_{Mars}}{ M_{Earth}} }[/tex]    r

                  r ( [tex]1 + \sqrt{ \frac{M_{Mars}}{M_{Earth}} }[/tex]) = D

                  r = [tex]\frac{D}{ 1+ \sqrt{\frac{M_{Mars}}{ M_{Earth}} } }[/tex]

We look for the values ​​in tables

                  D = 54.6 10⁹ m (minimum)

                  M_earth = 5.98 10²⁴ kg

                  M_Marte = 6.42 10²³ kg = 0.642 10²⁴ kg

let's calculate

                  r = 54.6 10⁹ / (1 + √(0.642/5.98)  )

                  r = 41.1 10⁹ m

Answer:

Density → Mass and Length.

Acceleration → Length and Time.

Force → Mass, Length and Time.

Pressure → Mass, Length and Time.

Work → Mass, Length and Time.

Answer:

Explained below.

Explanation:

Let the initial velocity from the top of the tower of height(h) be u'

Now, since it is projected horizontally, the horizontal distance covered will be due to having a uniform horizontal velocity (u) while it will possess a vertical distance in the downward direction due to constant acceleration due to gravity (g).

If the time it takes the ball to reach the ground is "t", then we can say the horizontal distance travelled by the ball is denoted as; x(t) = x, while the vertical distance is denoted by; y(t) = y

Now, since it's a projectile the intial velocity (u) will have vertical and horizontal components which are;

u_y and u_x respectively.

Applying kinematic equations, we have;

x = u_x•t + ½at²

Acceleration is zero in the horizontal x direction. Thus;

x = u_x•t

For the vertical y-direction;

y = u_y•t + ½at²

Here since direction is in that of gravity, then a = g.

Also, since the initial velocity has no downward component, then u_y = 0 m/s

Thus;

y = ½gt²

From x = u_x•t, we have;

t = x/u_x

Thus;

y = ½g(x/u_x)²

y = ½gx²/(u_x)²

Let g/(u_x)² be treated as a constant with the letter k.

Thus;

y = kx²

This is the form of a parabolic equation.

Thus, it has been proved that the projectile follows the path of a parabola.

Answer:

To explain what happens with the ball we must remember the Law of Conservation of Energy.

This law states that the energy can be neither created nor destroyed only converted from one form of energy to another.

Then,

At the top of the hill, the potential energy is maximum and the kinetic energy equals to zero.

When the ball starts to roll down the potential energy will be lower and the kinetic energy will have a low value.

At the middle of the hill, both energies have the same values.

At the end of the hill, the potential energy will be equal to zero and the kinetic energy will be maximum.

Correct me if I'm wrong...

hope it helps...