Answer:
1)The position change of almost any manually operated room light switch.
2) Sunlight striking a point on the ground on a partly cloudy and windy day
Explanation:
Cody hits up food king and uses a scale to weigh the mass of an apple. if the spring potential energy in the scale is .09 j and is spring is stretched 0.6 meters, calculate the spring constant
Answer:
oK so here's what you should do is add .09 and 0.6
Explanation:
A 2-kg object moving at 10 m/s has a 4-N force applied to it. Can you predict how the force will affect the object? A) yes, it will slow it down at a rate of 2 m/s2. B) yes, it will speed it up at a rate of 2 m/s2. yes, it will speed it up at a rate of 4 m/s2. D) It cannot be determined without more information.
Answer:
D) It cannot be determined without more information.
Explanation:
Velocity is a vector meaning it has both magnitude and direction.
Force and acceleration are also vectors.
Without knowing the directions of each, we cannot know if the mass has a speed (scalar value) change.
We can know that the mass will have a velocity change at the rate of 2 m/s² in the direction of the applied force.
If that force is applied in the direction of initial velocity, the velocity (and speed) will increase in magnitude in the same direction.
If that force is applied opposite of the initial velocity, the the velocity (and speed) will decrease in magnitude in the same direction. If the acceleration lasts long enough, velocity will eventually become zero and then become negative. At the same time, speed will become zero, and then increase again as speed is the absolute value of the magnitude of velocity.
If the force is applied at any other angle, both the velocity and the speed will change in both magnitude and direction.
When shopping for margarine what information should you look for on the label
Answer:
When buying a margarine, people should look for trans fat and saturated fat content. If it is over 2%, then it is not healthy. If it is lower that means it is healthy and fresh!
Explanation:
K
Mission CG9: Weightlessness
Consider the several locations along a roller coaster
track. In which location(s) would the riders feel less
than their normal weight? Select all that apply.
Location A
Location B
Location C
a
=-10 m/s/s, dn
--2 m/s/s, up
a--6 m/s/s, dn
Location D
Location E
x=-12 m/s/s, dn
---6 m/s/s, up
The locations where the riders feel less than their normal weight are Location A, Location C and Location D.
The given parameters;
Location A, a = 10 m/s² downLocation B, a = 2 m/s² upLocation C, a = 6 m/s² downLocation D, a = 12 m/s² downLocation E, a = 6 m/s² upThe normal weight of the riders is calculated by applying Newton's second law of motion as follows;
W = mg
W = 9.8m
The apparent weight of the riders for the upward acceleration is calculated as follows;
[tex]R = m(g + a)[/tex]
The apparent weight of the riders for the downward acceleration is calculated as follows;
[tex]R = m(g - a)[/tex]
The apparent weight of the riders at location A is calculated as follows;
[tex]R_ A = m(9.8 - 10)\\\\R_ A = -0.2 m[/tex]
The apparent weight of the riders at location B is calculated as follows;
[tex]R_B = m(9.8 + 2)\\\\R_B = 11.8 m[/tex]
The apparent weight of the riders at location C is calculated as follows;
[tex]R_C = m(9.8 - 6)\\\\R_C = 3.8 m[/tex]
The apparent weight of the riders at location D is calculated as follows;
[tex]R_D = m(9.8 - 12)\\\\R_D = -2.2 m[/tex]
The apparent weight of the riders at location E is calculated as follows;
[tex]R_E = m(9.8 + 6)\\\\R_E = 15.8 m[/tex]
Thus, the locations where the riders feel less than their normal weight are;
Location ALocation CLocation D.Learn more about Newton's second law and reading of a scale here: https://brainly.com/question/11603452
The energy transfer diagram for a piece of equipment is shown. You are using a hand-cranked flashlight. One minute of cranking typically provides about 30 to 60 minutes of light.
Describe ALL of the energy transformations that are taking place in this process.
A) mechanical energy to heat energy Eliminate
B) electrical energy to light energy
C) mechanical energy to light energy
D) chemical energy to mechanical energy
E) mechanical energy to electrical energy
Answer:
n/a
Explanation:
No diagram found. I am willing to help
In a hand-cranked flashlight first, mechanical energy produced with the hand is converted into electrical energy then the electrical energy is converted into light energy, therefore the correct answers are the option B and option E.
What is mechanical energy?The sum of all the energy in motion (total kinetic energy) and all the energy that is stored in the system (total potential energy) is known as mechanical energy.
The expression for total mechanical energy can be given as follows
ME= PE + KE
As given in the problem, the energy transfer diagram for a piece of equipment is shown. You are using a hand-cranked flashlight. One minute of cranking typically provides about 30 to 60 minutes of light.
The transformation that is taking place is the mechanical energy to electrical energy and then electrical energy to light energy.
Thus, the correct options are option are B and E.
Learn more about mechanical energy from here, refer to the link;
brainly.com/question/12319302
#SPJ2
How much work does an elephant do while moving a circus wagon 60 meters with a pulling force of 240N
Answer:
14,400
Explanation:
You need to do 240x60 and you would get the answer as 14,000
2. A ray of light is incident at 60° in the air on an air glass plane surface find the angle of refraction in the glass. (mew for glass=1.5)
[tex] [/tex]
Answer:
35.2644
I suppose mew is refractive index
Explanation:
( sin i ) / (sin r) = refractive index
( sin 60) / (sin r) = 1.5
( sin 60) / 1.5 =sin r
r=35.844
sorry if I'm wrong
someone plz help
An object accelerates from rest to 93 m/s over a distance of 49 m. What acceleration did it experience?
Answer:
Explanation:
v² = u² + 2as
a = (v² - u²) / 2s
a = (93² - 0²) / (2(49))
a = 88.255102...
a = 88 m/s²
12) A horizontal force of 200 N is applied to move a 55-kg cart (initially at rest) across a 10 m level surface. What is the final speed of the cart? [hint: use work – energy principle] [3 marks]
Hi there!
We can use the following:
W = ΔKE = F · d
Find the work done on the cart:
W = 200 · 10 = 2000 J
Now, this is equal to the change in kinetic energy of the object. Its initial kinetic energy is 0 J since it starts from rest, so:
2000J = KEf - KEi
KE is given as:
[tex]KE = \frac{1}{2}mv^2[/tex]
2000J = 1/2(55)v²
4000 = 55v²
√(4000/55) = 8.53 m/s
You are in Paris, 50. m up on an Eiffel Tower support leg observation deck. If you throw a euro downward at a velocity of -1.0 m/s, how long would it take the coin to hit the ground?
Here’s my work to your question. I used kinematic equations to solve. :)
An elephant has a mass of 55,000 kg. What is the elephant’s weight on Saturn (g= 10.4)?
Answer:
Explanation:
F = ma
F = 55000 kg(10.4)
F = 572000 N
That is an amazingly large elephant, more like 11 elephants
A more typical mass for a single elephant would be 5000 kg with a weight on Saturn of 52000 N
Are these a Chemical or Physical Change??
1. Sodium Bicarbonate breaks down into sodium carbonate and water.
A. Chemical Change
B. Physical Change
2. Mercury is cooled until it is in the solid state.
A. Chemical Change
B. Physical Change
The change of sodium bicarbonate breaking down into sodium carbonate and water is a chemical change. The cooling of mercury until it is in the solid state is physical change. The correct option for 1 is A and for 2 is B.
What is chemical and physical change?A chemical change occurs as a consequence of a reaction, whereas a physical change occurs when transformation occurs forms but retains its chemical identity.
Chemical changes include burning, cooking, rusting, and rotting. Physical changes include boiling, melting, freezing, and shredding.
A physical change is required to a specimen of matter in which some of the material's properties change but the matter's identity does not.
Physical changes can be classified as either reversible or irreversible. Melting is a reversible physical change because the melted ice cube can be refrozen.
In the first case, sodium bicarbonate is breaking down and forming sodium carbonate and water, this implies a chemical change.
In the second case, mercury is just cooling down, changing its physical shape. So it is physical change.
Thus, the correct option for 1 is A and for 2 is B.
For more details regarding chemical and physical changes, visit:
https://brainly.com/question/11321843
#SPJ2
Which statement about cultural differences in reinforcement is TRUE?
A. People from individualistic cultures may find the ability to get relatives jobs more reinforcing than people from
collectivistic cultures.
B. People from individualistic cultures may find awards that single them out as more reinforcing than people from
collectivistic cultures.
C. Women from individualistic cultures may place more importance on convenient working hours than women from
collectivistic cultures.
D. People from individualistic cultures find higher pay more reinforcing than people from collectivistic cultures.
People often wants to be recognized for their achievement. The true statement is that People from individualistic cultures may find awards that single them out as more reinforcing than people from
collectivistic cultures.
Individualism is simply known as a type of cultural system that place huge emphasis on the needs of the individual self more than those of the group/society.It is often based on the individual self and its specific qualities that distinguishes one from others.
Collectivism is simply known as a cultural system that place emphasis on the needs of the group/society more than our self need self.
Learn more from
https://brainly.com/question/19253449
Question 2 of 25
If JKLM is a parallelogram, what is the length of LM?
K
18
8
M
O A. 10
O B. 18
O C. 8
D. 26
SUBMIT
Answer:its 10
Explanation:
Answer:
8
Explanation:
An automobile moving along a straight track changes its velocity from 40 m/s to 80 m/s in a distance of 200 m. What is the (constant) acceleration of the vehicle during this time
Answer:
[tex]\huge\boxed{\sf a = 1200\ m/s\²}[/tex]
Explanation:
Given Data:
Initial Velocity = Vi = 40 m/s
Final Velocity = Vf = 80 m/s
Distance = S = 200 m
Required:
Acceleration = a = ?
Formula:
2aS = Vf² - Vi² (THIRD EQUATION OF MOTION)
Solution:
2a (200) = (80)² - (40)²
400a = 6400 - 1600
400a = 4800
Divide 400 to both sides
a = 4800 / 400
a = 1200 m/s²
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Why is acceleration of an object moving at a constant velocity always zero?
Answer:
If an object is moving with a constant velocity, then by definition it has zero acceleration. So there is no net force acting on the object. The total work done on the object is thus 0 (that's not to say that there isn't work done by individual forces on the object, but the sum is 0 ).
Explanation:
In the middle, when the object was changing position at a constant velocity, the acceleration was 0. This is because the object is no longer changing its velocity and is moving at a constant rate.
A mars surface exploration vehicle drops a rock off a 1.00 I'm high vertical Cliff. The sound of the rock landing at the base of the cliff is recorded by instruments on the vehicle 27.1 seconds later. Calculate the acceleration due to gravity on Mars given that the speed of sound on Mars is 320 m/s
The acceleration due to gravity on Mars is 11.81 m/s².
The given parameters:
Height of the cliff, h = 1 mTime of motion of the sound wave, t = 27.1 sSpeed of sound in mass, v = 320 sThe equation of motion to determine the acceleration due to gravity on the moon is calculated as follows;
[tex]s = vt + \frac{1}{2} gt^2[/tex]
where;
s is the distance traveledt is the time of motionSince the time measured is two way time, the new equation for the total distance traveled is calculated as;
[tex]v = \frac{2d}{t} \\\\2d = vt\\\\d = \frac{vt}{2} \\\\d = \frac{320 \times 27.1}{2} \\\\d = 4,336 \ m[/tex]
The acceleration due to gravity is calculated as follows;
[tex]s = vt + \frac{1}{2} gt^2\\\\4,336 = 0 \ + \ \frac{1}{2} \times g \times (27.1)^2\\\\4,336 = 367.21g\\\\g = \frac{4,336}{367.21} \\\\g = 11.8 1 \ m/s^2[/tex]
Thus, the acceleration due to gravity on Mars is 11.81 m/s².
Learn more about acceleration due to gravity here: https://brainly.com/question/88039
If a person climbed Mt. Everest has a mass of 105 kg and a weight of 625 N what would be the acceleration due to gravity?
The acceleration due to gravity would be 5.95 m/s²
A force is known to be a push or pull and it is the change in momentum per time. It can be expressed by using the relation.
Force = mass × acceleration.From the parameters given:
Mass = 105 kgForce = 625 NBy replacing the given values into the above equation, we can determine the acceleration.
∴
625 N = 105 kg × acceleration.
[tex]\mathbf{acceleration = \dfrac{625 \ N}{105 \ kg}}[/tex]
acceleration = 5.95 N/kg
Since 1 N/kg = 1 m/²acceleration = 5.95 m/s²
Learn more about acceleration(a) here:
https://brainly.com/question/14344386
An object is projected with speed of 4ms at an angle of 60° to horizontal. Calculate the time of flight of the object. (g=10ms2)
0.8 seconds
Explanation:
time of flight = 2u/g
u=4m/s
g=10
= 8/10
= 0.8 sec
just a trial...not sure!!!
Given :
∅ = 60⁰
u = 4 m/s
g = 10m/s²
to find :
T = ?
Solution :
as per formula,
[tex]t = \frac{2u \: sin \theta}{g} [/tex]
now put the value : [tex]t \: = \frac{2 \times 4 \times sin \: 60}{10} [/tex]
as we know [tex] sin60 \: = \frac{ \sqrt{3} }{2} [/tex]
therefore,
[tex]t \: = \frac{8 \times \frac{ \sqrt{3} }{2} }{10} [/tex]
as we solve this we get,
[tex]t \: = \frac{ 2\sqrt{3} }{5} [/tex]
that's t = 0.69 sec
[tex]\sf\fbox\red{\:I \:hope \:it's \:helpful \:to \:you}[/tex]
Use the diagram of the pulley system to complete the statement.In this pulley system, the pulleys will _____ the mechanical force required to lift the block and will change the _____.
The pulleys will reduce the mechanical force (effort) required to lift the block and will change the mechanical advantage.
The pulley system is a type of simple machine which makes our work easier and faster by overcoming a large load when a small force (effort) is applied to it.
The efficiency of a machine is calculated as follows;
[tex]Eff = \frac{M.A}{V.R} \times 100\%[/tex]
where;
M.A is the mechanical advantage V.R is the velocity ratio[tex]M.A = \frac{load}{effort}[/tex]
The velocity ratio of a pulley system = number of pulleys
The velocity ratio of a pulley system increases with increase in the number of pulleys.
Thus, we can conclude that the pulleys will reduce the mechanical force (effort) required to lift the block and will change the mechanical advantage.
Learn more about velocity ratio of pulleys here: https://brainly.com/question/24785465
During an experiment, your teacher gives you two objects: tissue paper and a balloon. You observe that the tissue paper repels the balloon. What does this most likely tell you about the charges of the two objects?
Both objects have negative charges.
The tissue has a positive charge, and the balloon has a negative charge.
The tissue has a negative charge, and the balloon has a positive charge.
The objects have no interactive with each other.
Answer:
i think your answer is this: the objects have no interactive with each other.
Explanation:
if you think about it tissue paper doesn't really have a static electrical charge if it does it is very weak so therefore cannot really attract or repel anything.
what is dispersion of light?
Answer:
[tex] \huge \bold \blue{ \underline{ answer}}[/tex]
The splitting up of light into its constituent colours while passing from one medium to the other is called dispersion.
Physics!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
What is the formula for calculating distance?
QA: Speed x Time -- Speed/Time -- Time/Speed
Answer:
x=v.t
The answer: Distance= Speed x Time
And also
Time = Distance/Speed
Speed= Distance/Time
Find the net torque .
Answer:
Explanation:
I will ASSUME this means torque about the dot.
3) 20(3) + 10(6) - 30(4) = 0 N•m
4) 10(0.5) - 6sin45(1) = -0.7573593... or about 0.76 N•m CCW
5) 25(3) - 40sin30(4) = -5 N•m or 5 N•m CCW
6) 15(3) - 12(2) - 10sin45(6) = -21.4264068... or about 21 N•m CCW
Which sentence states Newton's second law?
Answer:
Force is equal to the change in momentum per change in time.
Explanation:
That situation is described by Newton's Second Law of Motion. According to NASA, this law states, "Force is equal to the change in momentum per change in time. For a constant mass, force equals mass times acceleration." This is written in mathematical form as Force = mass.
The more matter in an object, the _____.(1 point)
lower its weight and mass
lower its weight and mass
more likely it is to have gravity
more likely it is to have gravity
greater its gravitational attraction to Earth
greater its gravitational attraction to Earth
less likely it is to have weight on the moon
Answer:
more likely it is to have gravity
An apple is falling from its tree. While falling, its acceleration changes
but not direction. Explain.
it changes ever 9.8 m/sec2.
Where do inherited traits come from
Answer:
Your parents or anyone in your ancestry.
Explanation:
Answer This!!!!!!
I'll give brainliest to whoever gets it right.
And 100 Points!
Answer: Time (days) = 88, the (mass) = 0.2180
Explanation:
Time (days) = 88, the (mass) = 0.2180
A 0.75 kg model car is moving west at a speed of 9.0 m/s when it collides head-on with a 2.00 kg model truck that is traveling east at a speed of 10.0 m/s. After the collision, the 0.75 kg model car is now moving east at 11 m/s. What is the speed and direction of the model truck after the collision?
Answer:
2.5 m/s east
Explanation:
Let east be the positive direction for velocity.
The change in momentum of the 0.75 kg model car is ...
m1·v2 -m1·v1 = (0.75 kg)(11 m/s) -(0.75 kg)(-9 m/s)
= (0.75 kg)(20 m/s) = 15 kg·m/s
The change in momentum of the 2.0 kg model car is the opposite of this, so the total change in momentum is zero.
m2·v2 -m2·v1 = (2 kg)(v2 m/s) -(2 kg)(10 m/s) = 2(v2 -10) kg·m/s
The required relation is ...
15 kg·m/s = -2(v2 -10) kg·m/s
-7.5 = v2 -10 . . . . divide by -2
2.5 = v2 . . . . . . . add 10
The velocity of the model truck after the collision is 2.5 m/s east.
