Describe some common chemical properties of matter?

The system developed to extinguish fires in commercial cooking operations, reducing the temperature of the burning liquid is the "wet chemical extinguishing system".

This system is specifically designed to suppress fires that start in deep fryers and other cooking appliances commonly found in commercial kitchens. The wet chemical extinguishing system is a specialized fire suppression system that uses a specially formulated liquid agent to extinguish fires by cooling the fuel and preventing re-ignition. The liquid agent is discharged in a fine mist, which blankets the burning fuel and cools it to below its ignition temperature. This helps prevent the fire from spreading and re-igniting, and reduces the potential for injury or property damage. Other fire suppression systems temperature that are commonly used include the combination system, which combines wet chemical and dry chemical agents, the dry pipe system, which is a type of sprinkler system that uses pressurized air to prevent water from entering the pipes until a fire is detected.

learn more about temperature   here:

https://brainly.com/question/11464844

#SPJ4

Answer:

that's molecular

Molecular formula

Answer:

The relationship between concentration and density is straightforward: the more solute that is dissolved in a solvent, the greater the density of the solution. In the case of a 50% solution of ethylene glycol in water, the density of the solution would be higher than that of pure water due to the presence of the ethylene glycol, which is denser than water. By measuring the density of the solution, it is possible to determine the concentration of ethylene glycol in the solution.

At 20 °C, the density of pure ethylene glycol is 1.135 g/mL while the density of water is 1.000 g/mL. So a solution that is 50% ethylene glycol would have a density that is intermediate between these two values, and its density could be used to determine the concentration of ethylene glycol in the solution. The greater the concentration of ethylene glycol, the greater the density of the solution, and vice versa. By measuring the density of the solution, it is possible to determine the concentration of ethylene glycol, and hence its suitability as antifreeze in an automobile radiator.

Explanation:

As determined by the stoichiometry, water is the limiting reactant, and 4.2 moles of the excess reactant are still present after the formation of 39.35 g of magnesium hydroxide and 1.35 g of water.

For more information on limiting agent kindly visit to

https://brainly.com/question/29505468

#SPJ1

The concentration of a solution can be expressed in molarity, molality, mass percent, etc. By dissolving the same number of moles of each substance in the same volume of water a scientist make two solutions with the same molarity. The correct option is A.

The molarity of a solution is defined as the number of moles of the solute present per litre of the solution. It is usually expressed in mol / L. The equation used to calculate the molarity is:

Molarity = Number of moles of the solute / Volume of the solution in litres

The solutions with the same number of moles and volume have equal molarity.

Thus the correct option is A.

To know more about molarity, visit;

https://brainly.com/question/19517011

#SPJ9

It is a greenhouse gas. The greenhouse effect is caused by the absorption by the surface of the Earth and re-absorption by the atmosphere of the greenhouse gases (CH₄, CO₂, NO, CFCs ) in the environment.

What is the greenhouse effect?

The greenhouse effect is a natural process by which certain gases in the Earth's atmosphere, known as greenhouse gases, trap heat from the sun and prevent it from escaping into space. The greenhouse gases, which include carbon dioxide, methane, water vapor, and others, act like a blanket around the Earth, absorbing and re-emitting infrared radiation that would otherwise be lost to space. This process helps to keep the Earth's temperature within a range that is suitable for supporting life. However, human activities such as burning fossil fuels have increased the concentration of greenhouse gases in the atmosphere, leading to an enhanced greenhouse effect and causing the Earth's temperature to rise, a phenomenon known as global warming.

To know more about greenhouse effect, visit:

https://brainly.com/question/13706708

#SPJ1

The complete question and the labelled answer respectively, is as follows:

283.875 mL of ethanol are in a 0.750gallon sample of the gasohol. Therefore, the correct option is option A.

Ethanol, sometimes known as ethyl alcohol, is a chemical liquid having the formula C2H5OH. Its primary application is as a solvent. To comprehend the chemical composition of ethanol, you must first grasp what alkenes are.

Alkenes are carbon and hydrogen molecules containing at at least one double bond between two carbons. Ethene is an example of an alkene.

1 gall = 3.785 L

0.750gallon =?

0.750gallon ×3.785 L / 1 gallon

= 2838.75 ml

10% of  2838.75 ml= 283.875 mL

Therefore, the correct option is option A.

To learn more about ethanol, here:

https://brainly.com/question/13264860

#SPJ9

Yellow is the correct answer .

Chlorophyll is a green pigment that is essential for the process of photosynthesis in plants, algae, and some bacteria. It absorbs light energy from the sun and converts it into chemical energy, which is then used to produce organic compounds that the organism can use for energy and growth. Chlorophyll is found in specialized organelles called chloroplasts, which are present in the cells of photosynthetic organisms. There are several types of chlorophyll, but the most common types found in plants are chlorophyll a and chlorophyll b. Chlorophyll is also responsible for the green color of leaves and other photosynthetic tissues.

To learn more about the Chlorophyll , click the given below ;

https://brainly.com/question/13500580

#SPJ1

Answer: it is C

Explanation:

c

There are 0.0249 moles of Cu in 1.5 x 10²² atoms of Cu.

What is Mole?

A mole is a unit of measurement used in chemistry to express amounts of a chemical substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12, which is approximately 6.022 x 10²³ entities.

This number is called Avogadro's number and is used as a conversion factor between the mass of a substance and the number of particles it contains.

To calculate the number of moles, we need to know the atomic mass of Cu, which is 63.55 g/mol.

We can use Avogadro's number, 6.022 x 10²³, to convert the number of atoms to moles:

1.5 x 10²² atoms Cu * (1 mol Cu / 6.022 x 10²³ atoms Cu) = 0.0249 mol Cu

Therefore, there are 0.0249 moles of Cu in 1.5 x 10²² atoms of Cu.

Learn more about Mole from given link

https://brainly.com/question/29367909

#SPJ1

There are 0.0249 moles of Cu in 1.5 x 10^22 atoms of Cu.

What is Mole?

A mole is a unit of measurement used in chemistry to express amounts of a chemical substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12, which is approximately 6.022 x 10^23 entities. This number is called Avogadro's number and is used as a conversion factor between the mass of a substance and the number of particles it contains.

To calculate the number of moles, we need to know the atomic mass of Cu, which is 63.55 g/mol.

We can use Avogadro's number, 6.022 x 10^23, to convert the number of atoms to moles:

1.5 x 10^22 atoms Cu * (1 mol Cu / 6.022 x 10^23 atoms Cu) = 0.0249 mol Cu

Therefore, there are 0.0249 moles of Cu in 1.5 x 10^22 atoms of Cu.

Learn more about Mole from given link

https://brainly.com/question/24191825

#SPJ1

There are 2.81 × 10^24 moles number of carbon atoms in a 140.0 g sample of glucose (C6H1206).

The term molar mass of a substance is defined as the mass in grams of one mole of the compound. In a substance, the amount of entities present e.g., atoms, molecules, ions. A mole of any substance is 6.022×10²³ molecules.

To calculate, we need to know the number of moles present in 140 grams of carbon.

number of moles = mass/molar mass

molar mass of glucose is = 180 g/mol

Therefore, the number of moles will be ;

140/180 = 0.7778 mole

1 mole of glucose contains 6 moles of carbon;

Then, 0.7778 moles will contain = 4.667 moles

the number of atoms in 1 mole is 6.02 × 10^23 atoms

The number of atoms in 4.667 moles will be :

4.667 × 6.02 × 10^23

= 2.81 × 10^24 atoms

Thus, 2.81 × 10^24 moles number of carbon atoms in a 140.0 g sample of glucose (C6H1206).

To learn more about the molar mass, follow the link;

https://brainly.com/question/12127540

#SPJ9

Taking into account the reaction stoichiometry, the volume of H₂ required is 44.8 L.

The balanced reaction is:

2 H₂ + O₂ → 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

H₂: 2 moles

O₂: 1 mole

H₂O: 2 moles

The STP conditions refer to the standard temperature and pressure, which values are 0 °C and 1 atmosphere as a reference values for gases. In these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

To calculate the number of moles of O₂ required, you can observe the stoichiometry of the reaction. By reaction stoichiometry 2 moles of H₂O are formed by 2 moles of H₂.

Now, you can apply the following rule of three: if by definition of STP conditions 1 mole of H₂ occupies a volume of 22.4 liters, 2 moles occupies how much volume?

volume= (2 moles× 22.4 L)÷ 1 L

volume= 44.8 L

Finally, 44.8 L of H₂ are needed.

Learn more about the reaction stoichiometry:

brainly.com/question/14658663

#SPJ1

Answer:

See Below

Explanation:

If my math is correct then this should be balanced

3Fe + 4H2O -> Fe3O4 + 4H2

Answer: 3Fe + 4H2O ---> 1Fe3O4 + 4H2

               Fe :  3                    :   3

                H : 8                      : 8

                O:  4                      :  4

Answer:it is 5 square c

Explanation:

because c is the best

One mole of a substance is equal to 6.022 × 10²³ units of that substance The number 6.022 × 10²³ is known as Avogadro's number or Avogadro's constant.

Hence, the first conversion is the number fundamentally which is 6.022x1023 particles 1 mole to convert an integer of moles to particles and the other one is the reciprocal of Avogadro's number which is 1 mole 6.022x1023 particles to convert a number of specks to a number of moles.

The word mole mentions Avogadro's number of a substance. For example, a mole of carbon-12 atoms happens to be 12 grams. Moreover, a mole of hydrogen particles is 2 grams while a mole of hydrogen conversion atoms occurs to be 1 gram.

So we can conclude that conversion allying Avogadro's Number of Atoms to Moles and Vice Versa

Learn more about Avogadro's here:https://brainly.com/question/1513182

#SPJ1

The two possible conversion factors using Avogadro's number are:

1 mole = Avogadro's number of particles

So, the conversion factor is Avogadro's number of particles/mole.

1 mole = Avogadro's number of particles

So, the conversion factor is 1 mole/Avogadro's number of particles.

Avogadro's number is described as the number of atoms, ions, or molecules in one mole of a substance.

The Avogadro constant has defining constant with an exact value of 6.02214076×10²³ reciprocal moles.

Learn more about Avogadro's number at: https://brainly.com/question/14138110

#SPJ1

Based on given titration reaction, following are the values asked -

a) 0.3237M of the SO₃⁻ solution.

b) Permanganate solution

c) 0.008093M

Titration is a typical laboratory technique for quantitative chemical analysis used to calculate the concentration of an identified analyte.

a) Based in the reaction, 2 moles of MnO₄⁻ react with 5 moles of SO₃⁻. Moles of permanganate used in titration are:

0.02389L×0.1355mol/L = 0.003237moles of MnO₄⁻. The moles of SO₃⁻ are:

0.003237moles of MnO₄⁻ × (5 moles of SO₃⁻ / 2 moles of MnO₄⁻) = 0.008093 moles of SO₃⁻

As volume of the solution is 25.00mL, the concentration of the solution is:

0.008093 moles of SO₃⁻ / 0.02500L = 0.3237M of the SO₃⁻ solution.

b) In a titration, the solution that is in the buret (Titrant), is the solution of known concentration, for the problem, permanganate solution

c) The moles of the Mn²⁺ solution are the same of MnO₄⁻. That is:

0.003237moles. As the volume of the new solution is 400mL, the concentration of the solution is:

[ Mn²⁺] = 0.003237moles / 0.400L = 0.008093M

To know more about titration point, click the link given below:

brainly.com/question/2728613

#SPJ1

According to the concept of half-lives, atoms remaining after 2,4,6,8,10 years are 500,250,125,62.5,31.25 atoms respectively.

Half -life of a substance is defined as the time which is required for half of the quantity of a radioactive substance to get decayed.It is a term which is used in nuclear chemistry for describing how quickly unstable atoms undergo radioactive decay into other nuclear species by emitting particles or the time which is required for number of disintegrations per second of radioactive material to decrease by one half of its initial value.

After 2 years ;1000/2=500 atoms

After 4 years ;500/2=250 atoms

After 6 years ;250/2=125 atoms

After 8 years;125/2=62.5 atoms

After 10 years ;62.5/2=31.25 atoms

Learn more about half life,here:

https://brainly.com/question/24710827

#SPJ9

The number of moles of Al2S3 that would be equivalent to 605 g of the compound will be 4.03 moles.

The number of moles in a particular mass of a compound is the ratio of the mass of the compound and the molar mass of the compound.

Mole = mass/molar mass

Molar mass of Al2S3 = 150.17

Mole of 605 g Al2S3 = 605/150.17

                                    = 4.03 moles

In other words, the number of moles of 605 g Al2S3 is 4.03 moles.

More on the number of moles can be found here: https://brainly.com/question/12513822

#SPJ1

The solution is supersaturated from the solubility curve shown.

A solubility curve is a graphical representation of the relationship between the solubility of a substance and temperature. It shows how the solubility of a solid solute (e.g., salt, sugar) changes with temperature in a given solvent (e.g., water).

A solubility curve is typically plotted with solubility on the y-axis and temperature on the x-axis. The curve generally slopes upward, meaning that as the temperature increases, the solubility of the solute in the solvent also increases. This is because higher temperatures increase the energy of the solvent and solute particles, making it easier for them to dissolve and form a homogeneous solution.

Learn more about solubility curves:https://brainly.com/question/8591226

#SPJ1

Missing parts:

When 50 grams of potassium chloride KCI is dissolved in 100 grams of water at 50 C the solution can correctly be described as

A unsaturated

B saturated

C supersaturated

Triglycerides, also known as triacylglycerols, are composed of a glycerol backbone attached to three fatty acid chains.

The fatty acids are esterified to the three hydroxyl groups of the glycerol backbone, forming a molecule with three fatty acid chains bound to a glycerol molecule. Triglycerides are the main constituents of natural fats and oils and are the most common form of stored energy in animals.

Triglycerides are the main type of fat (lipid) found in the body and in food. They are composed of three fatty acids attached to a glycerol backbone. Triglycerides are an important source of energy for the body and are stored in adipose tissue (body fat) for later use. They can also be found in the bloodstream, where they can contribute to the formation of plaque in the arteries, increasing the risk of heart disease. Triglycerides are commonly found in foods that are high in fat, such as oils, butter, and meats, as well as in some plant-based foods, such as nuts and seeds.

To learn more about Triglycerides :

https://brainly.com/question/13840067

#SPJ4

Answer:

In order to calculate the theoretical yield of Aluminum Sulfate in this reaction, you would need to know the balanced chemical equation for the reaction between Copper (II) Sulfate and Aluminum.

Without that information, it is not possible to determine the amount of Aluminum Sulfate that would be produced from 2.50 grams of Copper (II) Sulfate.

Explanation:

The derived unit for voltage inside the International System of Units is called volt. V is the symbol for voltage. Therefore, the correct option is option D.

Voltage seems to be the difference throughout electric potential between two locations, often referred to as electrical pressure, electric tension, as well as (electric) potential difference.

It refers to the labor required per unit of charge that move pure test charge between two places inside a static electric field. The derived unit for voltage inside the International System of Units is called volt. V  is the symbol for voltage.

Therefore, the correct option is option D.

To know more about voltage, here:

https://brainly.com/question/28164474

#SPJ9

Electrons are negatively charged subatomic particles that orbit the nucleus of an atom. They are essential for chemical reactions, as they participate in the formation and breaking of chemical bonds. The appropriate diagram relating to the question is attached.

A radical is a molecule or atom that contains one or more unpaired electrons. Radicals are highly reactive and can participate in a wide range of chemical reactions, such as combustion, polymerization, and oxidation.

A cationic intermediate is a positively charged species that forms during a chemical reaction. It is an intermediate state between the starting materials and the final products, and it is typically short-lived. Cationic intermediates can be formed by the loss of an electron or by the addition of a proton or other positively charged species.

Check the attachment.

Learn more about electrons on:

https://brainly.com/question/26084288

#SPJ1

The arrow shows that the bond between the chlorine atom and the fluorine atom is polar covalent. The electrons in the bond are pulled closer to the fluorine atom, and the chlorine atom is slightly negative.

A polar covalent bond is a type of chemical bond that occurs when two atoms share electrons unequally. In a polar covalent bond, the electrons are attracted more strongly to one of the atoms than the other, leading to a separation of electric charge.

The electrons in the bond are pulled closer to the fluorine atom, making it slightly negative, and the chlorine atom becomes slightly positive. This is because fluorine is more electronegative than chlorine, meaning that it has a greater attraction for the shared electrons in the bond.

Learn more on polar covalent atom here: https://brainly.com/question/14051272

#SPJ1

Answer:

Organic solidarity

Explanation:

its right

According to the question, the drip rate in gtt/min is 25 gtt/min.

What is drip rate?

Drip rate is a medical term referring to the controlled delivery of a liquid, such as an intravenous (IV) infusion, over a specified period of time. It is usually expressed in terms of drops per minute. It is also called drop rate, infusion rate or flow rate.

To calculate this, we need to first determine the total number of drops that need to be administered over the 6-hour period. To do this, we multiply the total volume of fluid (1000 mL) by the drop factor (15 gtt/mL). This gives us a total of 15,000 gtt.

Now we need to determine how many drops are required per minute. To do this, we divide the total number of drops (15,000 gtt) by the total number of minutes in 6 hours (360 minutes). This gives us a result of 41.67 gtt/min.

Finally, we need to round this value up to the nearest whole number. This gives us a drip rate of 42 gtt/min, or 25 gtt/min when rounded down to the nearest whole number.

To learn more about drip rate
https://brainly.com/question/29714014

#SPJ1

Answer: Urine

Explanation: The kidneys are the organs that clean the blood stream, they filter about a half cup of blood every minute and they remove waste and extra unnecessary water from the blood stream, with this they produce urine that would be later expelled from the body.

The molar specific heat, Cv, of a gas in which each molecule has degrees of freedom γ is  [tex]C_v= (s*r)/2 J/mol*K[/tex]

The molar heat capacity of a chemical substance is the quantum of energy that must be added, in the form of heat, to one operative of the substance in order to beget an increase of one unit in its temperature.

Alternately, it's the heat capacity of a sample of the substance divided by the quantum of substance of the sample; or also the specific heat capacity of the substance times its molar mass. The SI unit of molar heat capacity is joule per kelvin per operative, JK⁻¹

The largest number of logically independent values—that is, values with the freedom to change—in the data sample is referred to as the degree of freedom. If there is a remaining requirement for the data sample, particular data sample items must be picked after the degrees of freedom quantity has been decided.

Learn more about Degree of freedom:

https://brainly.com/question/30488442

#SPJ4

Complete question:

Thermodynamics deals with the macroscopic properties ofmaterials. Scientists can make quantitative predictions about thesemacroscopic properties by thinking on a microscopic scale. Kinetictheory and statistical mechanics provide a way to relate molecularmodels to thermodynamics. Predicting the heat capacities of gasesat a constant volume from the number of degrees of freedom of a gasmolecule is one example of the predictive power of molecularmodels.

The molar specific heatC_vof a gas at a constant volume is thequantity of energy required to raise the temperatureTof one mole of gas by one degree while thevolume remains the same. Mathematically,

[tex]C_{\rm v}= \frac{1}{n}\,\frac{dU}{dT},[/tex]

wherenis the number of moles of gas,dUis the change in internal energy, anddTis the change in temperature.

Kinetic theory tells us that the temperature of a gas isdirectly proportional to the total kinetic energy of the moleculesin the gas. The equipartition theorem says that each degree offreedom of a molecule has an average kinetic energy equal to[tex]\frac{1}{2}k_}{\rm BT[/tex],  wherek_Bis Boltzmann's constant[tex]1.38 \times 10^{-23} \rm {J/K}[/tex] . Whensummed over the entire gas, this gives[tex]\frac{1}{2}nR[/tex]T, where [tex]R=8.314\; {\rm \frac{J}{mol\cdot K}}[/tex] is the ideal gas constant, for each molecular degree offreedom.

Part A

Using the equipartition theorem, determine the molar specific heat,C_v, of a gas in which eachmolecule hassdegrees of freedom.

Express your answer in terms ofRands.

Part B

Given the molar specific heatC_vof a gas at constant volume, you candetermine the number of degrees of freedomsthat are energetically accessible.

For example, at room temperature cis-2-butene,\rm C_4 H_8, has molar specific heat [tex]C_v=70.6\;{\rm \frac{J}{mol \cdot K}[/tex]}. How many degrees of freedom of cis-2-butene areenergetically accessible?

Express your answer numerically to the nearest integer.

Answer:

The average person is most likely to have Schedule V controlled substances in their homes. These drugs have a low potential for abuse and limited dependence liability compared to other schedule levels. They are often used for medical purposes and include cough syrups containing codeine, anti-diarrhea medications, and some prescription pain medications.

The drugs in other schedule levels, such as Schedule I, II, III, and IV, have a higher potential for abuse and dependence and are considered to be more dangerous and addictive. These schedules include drugs such as cocaine, methamphetamine, fentanyl, and other highly regulated substances.

Explanation: