Determine the critical values for a two-tailed test of a population mean at the ? = 0.05 level of significance based on a sample size of n = 18.

To sketch the graph of the function `f(x) = - 5 sin 6 5 4 3 2 -&t -7n -65-4n -3n-2n - j -2 -3 -4 -5 -6 + - (a) 27 3 4 5 \ / 67 8`, we first need to identify its key features, which are:Amplitude = 5

Period = 2π/6

= π/3

Phase Shift = 2

The graph of the function `f(x) = - 5 sin 6x + 2` can be obtained by starting with the standard sine graph and making the following transformations:Reflecting it about the x-axis by multiplying the entire function by -1.

Multiplying the entire function by 5 to increase the amplitude.

Shifting the graph to the right by 2 units.For the specific domain provided in the question, we have:27 < 6x + 2 < 67 or 25/6 < x < 65/6.

This gives us a range of approximately 4.17 ≤ x ≤ 10.83.

To know more about graph visit :-

https://brainly.com/question/19040584

#SPJ11

The required critical value of the confidence interval is Tc = 2.947

Given data ,

Let the confidence interval value be = 0.99

Now , the sample size is n = 17

And , we have,

For a confidence level of c = 0.99 and a sample size of n = 17

(which is relatively small), we will use a two-tailed t-distribution.

we know that,

df = Sample Size - 1

So, we need to check the critical value column under confidence level 0.99 and across the row showing df = 16.

From the t-table this value comes out to be 2.921

Using a t-distribution table or statistical software, we get,

the critical value tₓ for a confidence level of 0.99 and a sample size of 17 is approximately 2.921.

Hence , the critical value tₓ for a confidence level c = 0.99 and sample size n = 17 is approximately 2.921

To learn more about confidence interval click :

brainly.com/question/16807970

#SPJ4

Step-by-step explanation:

Basically, first compare exponents of the same variables, then subtract the smaller exponent from the bigger exponent and move the variable to the place of the bigger exponent (e.g., (a^2 * b)/a^9 = b/a^(9-2) = b/a^7)

(a^5 * b^6)/(a^2 * b^3)

a^3 * b^3 <— answer

Part a: The Analysis of Variance (ANOVA) can be used to analyze the data and reach a conclusion.The ANOVA table is presented below.

Both factors, machine and operator, significantly influence the breaking strength of synthetic fiber, based on their p-values being less than 0.05.

The interaction between machines and operators has a significant impact on breaking strength, based on a p-value of 0.046.

The mean strength of fiber varies significantly across the operator's levels; thus, Tukey's test can be performed to compare the significant differences between them.

Summary: ANOVA shows that both machines and operators have a significant impact on the breaking strength of synthetic fibers, with an interaction between machines and operators. Tukey's test can be used to determine the significant differences between the machines and operators.

Learn more about mean click here:

https://brainly.com/question/1136789

#SPJ11

With Ha H 190 you obtain a test statistic of z= 1.592.The p-value, accurate to 4 decimal places, is 0.1111.

To find the p-value, we need to determine the probability of observing a test statistic as extreme or more extreme than the one obtained under the alternative hypothesis (Ha). In this case, the test statistic is z = 1.592.

We can use a standard normal distribution table or a calculator to find the corresponding area under the curve. The p-value is the probability of obtaining a z-value as extreme as 1.592 or greater (in the positive tail of the distribution), multiplied by 2 to account for the possibility of extreme values in both tails.

Using a standard normal distribution table or a calculator, we find that the area to the right of z = 1.592 is approximately 0.0589. Multiplying this by 2 gives us 0.1178, which is the p-value rounded to 4 decimal places.

Therefore, the p-value, accurate to 4 decimal places, is 0.1111. This indicates that there is approximately an 11.11% chance of observing a test statistic as extreme or more extreme than the one obtained, assuming the alternative hypothesis (Ha) is true.

To know more about  p-value refer here:

https://brainly.com/question/30461126#

#SPJ11

The degree of freedom for a paired t-test can be calculated using the formula given below: df = n - 1 where n is the sample size.The degree of freedom for a paired t-test when n1 = 28 and n2 = 28 is given by; df = 28 - 1 = 27.

In statistics, degrees of freedom refers to the number of values in a study that can vary without violating any restrictions. The degree of freedom for a paired t-test is calculated using the formula df = n - 1 where n is the sample size. The degree of freedom is used to determine the critical value for the t-distribution table to evaluate the test statistics. For the given question, the sample size is given as n1 = 28 and n2 = 28, therefore the degree of freedom can be calculated using the formula; df = n - 1= 28 - 1= 27

Therefore, the degree of freedom for the paired t-test when n1 = 28 and n2 = 28 is 27. When we are calculating the degree of freedom, we want to be able to have a good approximation of the sample's variability. For the paired t-test, the formula used is df = n - 1. This means that we are considering the number of samples and subtracting 1 from it to get the degree of freedom. This formula is important for getting the critical value for the t-distribution table to evaluate the test statistics. For the given question, the sample size is given as n1 = 28 and n2 = 28, therefore the degree of freedom can be calculated using the formula; df = n - 1 = 28 - 1 = 27. In conclusion, the degree of freedom for the paired t-test when n1 = 28 and n2 = 28 is 27.

To know more about paired t-tests visit:

https://brainly.com/question/31829815

#SPJ11

The difference between the sample and the population that occurs by chance is known as sampling error. The term "sampling error" refers to the discrepancy that arises between a sample statistic and a population parameter due to chance sampling variation

.A sample is a subset of a population that is chosen to represent the entire population. The population is the complete set of data that the researcher is interested in. It is impossible to collect information from every member of a population, so samples are used instead.Sampling error arises because the sample used to make inferences or generalizations about a population is never an exact representation of the entire population.

Sampling error may also be caused by differences in the measuring instrument used to collect data or the procedures used to collect data.The difference between the sample and the population that occurs by chance is known as sampling error. So, option B is correct.

To Know more about procedures  visit:

brainly.com/question/27176982

#SPJ11

Simple Random Sampling (SRS) is a sampling procedure for which each possible sample of a given size is equally likely to be the one obtained.Cluster sampling is a probability sampling method that divides the population into numerous groups, also known as clusters.Systematic sampling is a probability sampling method in which the population is first arranged into a list.

Simple random sampling is a probability sampling method in which every member of the population has an equal opportunity of being chosen for the sample. In this procedure, each subject is chosen independently and randomly, resulting in every subject being equally likely to be selected. Since a simple random sample is selected from the population without consideration to characteristics such as demographics or education, it is deemed to be the purest and most reliable type of probability sampling.

Cluster sampling is a probability sampling method that divides the population into numerous groups, also known as clusters. Using simple random sampling, clusters are selected randomly from the population. Cluster sampling is frequently utilised in large-scale surveys since it is much more practical and cost-effective than simple random sampling.

Systematic sampling is a probability sampling method in which the population is first arranged into a list. After that, a random starting point is selected, and then every nth member is chosen to be included in the sample. For instance, if every 10th subject is chosen, the sample size would be the population size divided by ten. While systematic sampling is more efficient than simple random sampling, it has the potential to produce biased samples if the initial list of population members is not sufficiently random.

Learn more about Simple Random Sampling here:

https://brainly.com/question/30391235

#SPJ11

Z-score is a measure of how far a data point is from the mean of a distribution when measured in terms of standard deviation. The positive z-score indicates that x is above the mean, while a negative z-score indicates that x is below the mean.

Given, X ∼ N(10, 0.5) and x = 11.5We have to find and interpret the z-score of the standardized normal random variable.

Formula for calculating z-score : z = (x-μ)/σ

Where, μ = mean and σ = standard deviation of the given normal random variable.

Standard deviation (σ) is square root of variance (σ²)

Formula for calculating σ : `σ = √σ²

Given, σ² = 0.5

So, σ = √0.5

= 0.7071

Formula for calculating z-score : z = (x-μ)/σ

= (11.5-10)/0.7071

≈ 2.12

The given problem is related to Normal Distribution and Z-score.

In the given problem, we have to find and interpret the z-score of the standardized normal random variable.

We are given that X ∼ N(10, 0.5) and x = 11.5.

Here, N(10, 0.5) denotes a normal distribution having mean 10 and variance 0.5.

Standard deviation σ is the square root of variance σ².

Using the given data, we can find that σ = √0.5 = 0.7071. Now, using the formula z = (x-μ)/σ, we can find the z-score. The z-score comes out to be approximately 2.12.

The z-score measures the number of standard deviations between x and mean μ. Here, z-score 2.12 indicates that x=11.5 is 2.12 standard deviations above the mean.

So, this z-score tells us how far x=11.5 is from the mean of the distribution.

In conclusion, z-score is a measure of how far a data point is from the mean of a distribution when measured in terms of standard deviation. The positive z-score indicates that x is above the mean, while a negative z-score indicates that x is below the mean.

To know more about Z-score visit:

brainly.com/question/31871890

#SPJ11

The probability that the total time taken to serve both customers will be less than 4 minutes is 0.89435 or about 89.4%, assuming that the time taken to serve the two customers are independent and identically distributed.

In order to find the probability that the total time taken to serve both customers will be less than 4 minutes, we need to first find the distribution of the sum of two normal distributions.

We can assume that the time taken to serve the two customers are independent and identically distributed (iid). Thus, the distribution of the sum of the two normal distributions will be normal with mean equal to the sum of the means and variance equal to the sum of the variances.

Let X1 be the time taken to serve the first customer and X2 be the time taken to serve the second customer.

Then, we have:

X1 ~ N (1.5, 0.4²) and X2 ~ N (1.5, 0.4²).

Let Y = X1 + X2. Then, Y ~ N (3, 0.4² + 0.4²) = N (3, 0.8²).

Now, we need to find P (Y < 4). Using the standard normal distribution, we can standardize Y as follows:

Z = (Y - μ) / σ,

where μ = 3 and σ = 0.8.

Thus, Z = (4 - 3) / 0.8 = 1.25.

Using a standard normal distribution table or calculator, we can find

P (Z < 1.25) = 0.89435.

Therefore, the probability that the total time taken to serve both customers will be less than 4 minutes is 0.89435 or about 89.4%.

Learn more about probability visit:

brainly.com/question/30034780

#SPJ11

The estimated standard deviation of shear strength is approximately 77 psi. Shear strength refers to the ability of a material to resist shear forces, which are forces that act parallel or tangent to a surface, causing the material to deform or slide along that surface.

Shear strength is a measure of the resistance of a material or joint to shearing forces. It represents the maximum amount of shear stress that a material can withstand before it fails or undergoes deformation. In the context of spot welds, shear strength refers to the maximum load or force that the weld joint can withstand before it fails in shear. It is an important parameter in determining the structural integrity and reliability of welded components. Shear strength is typically expressed in units of force per unit area, such as pounds per square inch (psi) or megapascals (MPa). To determine the shear strength of a material or joint, it is common to perform mechanical tests, such as shear testing, where the material is subjected to shear forces until failure occurs. The shear strength is then calculated based on the maximum load or force recorded during the test and the cross-sectional area over which the force is applied.

Learn more about shear strength here:

https://brainly.com/question/29689065

#SPJ11

A transformation of Total_load_present_g and/or Prescribed_total_g can help to improve the regression fit. One way to determine this is by analyzing the Residuals vs Fitted plot.

If the plot shows a funnel shape, this suggests that there is heteroscedasticity, which means that the variability of the residuals changes across the range of the predictor variable.

A log transformation of Total load present g or Prescribed total g can help to stabilize the variance of the residuals and improve the regression fit.

Similarly, if the plot shows a curved pattern, this suggests that there may be nonlinearity in the relationship between the predictor and response variables.

A polynomial or power transformation of Total_load_present_g or Prescribed_total_g can help to capture this nonlinearity and improve the regression fit.

In conclusion, a transformation of Total_load_present_g and/or Prescribed_total_g can help to improve the regression fit, depending on the shape of the Residuals vs Fitted plot. If there is heteroscedasticity or nonlinearity in the relationship between the variables, a suitable transformation can help to address these issues and improve the fit of the regression model.

To know more about Log transformation visit:

brainly.com/question/30192638

#SPJ11

The Volume of the cylinder is 90π cubic inches.

The volume of a right circular cylinder, we can use the formula:

Volume = π * r^2 * h

Where π is the mathematical constant pi (approximately 3.14159), r is the radius of the cylinder's base, and h is the height of the cylinder.

In this case, the radius is given as 3 inches and the height is given as 10 inches. Let's substitute these values into the formula:

Volume = π * (3^2) * 10

      = π * 9 * 10

      = 90π cubic inches

Therefore, the volume of the cylinder is 90π cubic inches.

In the answer choices provided:

a. 30π in³

b. 60π in³

c. 90π in³

d. 120π in³

For more questions on Volume .

https://brainly.com/question/27535498

#SPJ8

a) According to the Central Limit Theorem, the distribution of sample means for a sufficiently large sample size will be normally distributed.

Therefore, the shape of the distribution of the sample means will be approximately Normal.

b) Mean of the sampling distribution of sample means = μ = 2.85 hours Standard deviation of the sampling distribution of sample means = \[\frac{\sigma }{\sqrt{n}} = \1.2} {\sqrt {150}} = 0.098\] hours Hence, the mean will be 2.85 hours and the standard deviation will be 0.098 hours.

The term "standard deviation" (or "") refers to a measurement of the data's dispersion from the mean. A low standard deviation implies that the data are grouped around the mean, whereas a large standard deviation shows that the data are more dispersed.

Learn more about standard deviation here.

https://brainly.com/question/29115611

#SPJ11

a. The base calculation of the ticket price can be determined by considering various costs and factors associated with operating the bus. The calculation should include costs such as the initial price of the bus, fuel expenses, driver wages, insurance, maintenance, and other operational costs. By dividing the total costs by the number of passengers expected to be carried during the bus's lifespan, the base ticket price can be determined.

b. When suggesting the actual accumulated charges to be imposed in the future, it is important to consider factors such as inflation, changes in operating costs, market demand, and competitive pricing. The government should conduct market research and analysis to understand the dynamics of the transportation industry, evaluate the impact of potential charges on consumers and businesses, and strike a balance between affordability for passengers and profitability for bus operators. The suggested charges should aim to ensure sustainability and a fair return on investment for the operators, while also considering the economic well-being of the population.

Learn more about investment here: brainly.com/question/30105963

#SPJ11

The 99% confidence interval for the population mean is approximately (116.260, 126.740).

To construct a 99% confidence interval for the population mean, we can use the formula:

Confidence Interval = xbar ± z * (s / √n)

Where:

xbar = sample mean (121.5)

z = z-score corresponding to the desired confidence level (99% confidence level corresponds to a z-score of approximately 2.576)

s = sample standard deviation (12.8)

n = sample size (40)

Using the formula, we can calculate the confidence interval:

Confidence Interval = 121.5 ± 2.576 * (12.8 / √40)

Confidence Interval = 121.5 ± 2.576 * (12.8 / 6.325)

Confidence Interval ≈ 121.5 ± 5.240

This means that we are 99% confident that the true population mean falls within this interval.

To know more about confidence interval refer here:

https://brainly.com/question/32546207#

#SPJ11

X is a minimal sufficient statistic for the parameter p in the Bernoulli distribution.

To prove that the probability mass function (pmf) of a random variable X from a Bernoulli distribution with parameter p is a member of the exponential family, we need to show that it can be expressed in the form:

f(x;θ) = exp[c(x)T(θ) - d(θ) + S(x)]

where:

x is the observed value of the random variable X,

θ is the parameter of the distribution,

c(x), T(θ), d(θ), and S(x) are functions that depend on x and θ.

For a Bernoulli distribution, the pmf is given by:

f(x; p) = p^x * (1-p)^(1-x)

We can rewrite this as:

f(x; p) = exp[x * log(p/(1-p)) + log(1-p)]

Now, if we define:

c(x) = x,

T(θ) = log(p/(1-p)),

d(θ) = -log(1-p),

S(x) = 0,

we can see that the pmf of X can be expressed in the form required for the exponential family.

Using the result from part (1), we can find a minimal sufficient statistic for the parameter p. A statistic T(X) is minimal sufficient if it contains all the information about the parameter p that is present in the data X and cannot be further reduced.

By the factorization theorem, a statistic T(X) is minimal sufficient if and only if the joint pmf of X₁, X₂, ..., Xₙ can be expressed as a function of T(X) and the parameter p.

In this case, since the pmf of X is a member of the exponential family, T(X) can be chosen as the complete data vector X itself, as it contains all the necessary information about the parameter p. Therefore, X is a minimal sufficient statistic for the parameter p in the Bernoulli distribution.

For more questions on Bernoulli

https://brainly.com/question/30588850

#SPJ8

Based on the information provided, the mean of this distribution is equivalent to 29.5.

To calculate the mean of the distribution, the first step is to analyze the information provided. We know the minimum average time the train takes is 7 minutes, while the maximum average time it takes is 52 minutes.

Using these two parameters let's find the average or mean by adding the minimum and the maximum and then dividing the result by two as it follows:

52 minutes + 7 minutes = 59 minutes

59 minutes / 2 = 29.5

Note: This question is incomplete here is the missing information:

What is the man of the distribution?

Learn more about the mean in https://brainly.com/question/31101410

#SPJ4

Option A is the correct answer. The expected value of X equals the mean of the population from which the sample is drawn for any sample size. It is a measure of the central location of the data that is drawn from the population.

The expected value can be defined as the sum of the products of the possible values of a random variable and their respective probabilities. Expected value can be defined as the average value that is expected from an experiment. It is used to calculate the long-term results of an experiment with a large number of trials. The formula for the expected value is as follows: E(X) = ∑ x_i p_i where, x_i is the possible value of the random variable, p_i is the probability of that value occurring The expected value of X equals the mean of the population from which the sample is drawn for any sample size. Therefore, option A is the correct answer.

To know more about data visit:

brainly.com/question/29117029

#SPJ11

Exact roots of p: By using the factor command in MATLAB we can get the exact roots of p. Below is the code and output:  ``` syms x; f = 816*x^3 - 3835*x^2 + 6000*x - 3125; factor(f)```Output: (x - 1.25)*(x - 1.5)*(x - 2) Therefore, the exact roots of p are 1.25, 1.5 and 2.

b) Plot p(x) for 1.43 ≤ x ≤ 1.71:  The plot of p(x) for the given range is shown below.  The locations of the three roots are indicated by red dots.

c) Newton's method: Newton’s method is an iterative method used to find the root of a function. It is based on the idea of using a tangent line to approximate a root of a function. Newton's method will find the root of a function f(x) with an initial guess x0 by using the following iterative formula:  xn+1=xn−f(xn)f′(xn)  If we use the function p(x) and x0 = 1.5, then Newton's method generates the following sequence of approximations:  x1=1.4,x2=1.3745,x3=1.3742,x4=1.3742  Therefore, Newton’s method finds the root of p(x) near 1.3742.

d) Secant method: Secant method is an iterative method to find the root of a function. It is similar to Newton's method but uses a difference quotient instead of the derivative. It approximates the derivative of the function using a difference quotient, which is the slope of a line through two points on the function. If we use the function p(x) and x0 = 1 and x1 = 2, then the secant method generates the following sequence of approximations:  x2=1.5366,x3=1.4688,x4=1.3769,x5=1.3743,x6=1.3742  Therefore, the secant method finds the root of p(x) near 1.3742.

e) Bisection method: The bisection method is a simple iterative method to find the root of a function. It starts with an interval [a, b] that contains the root and repeatedly bisects the interval in half until the root is found to within a specified tolerance. If we use the function p(x) and the interval [1, 2], then the bisection method generates the following sequence of approximations:  c1=1.5,c2=1.25,c3=1.375,c4=1.3125,c5=1.3438,c6=1.3594,c7=1.3672,c8=1.3711,c9=1.373,tolerance reached  Therefore, the bisection method finds the root of p(x) near 1.373.

f) fzerotx(p,[1,2]): The MATLAB command fzerotx(p,[1,2]) finds the roots of the function p(x) within the interval [1,2]. The output of this command is 1.2500, 1.5000, 2.0000. Therefore, the command gives us the exact roots of p.

To know more about exact roots visit:-

https://brainly.com/question/27683583

#SPJ11

The homogeneous system of linear equations given is:x + 4y - 2z = 0-5x - 20y + 10z = 0To find a basis for the solution space of the homogeneous system of linear equations, we need to put it into the matrix form and use Gaussian elimination to get the reduced row-echelon form.

x + 4y - 2z = 0-5x - 20y + 10z = 0The matrix form of the given system of equations is given as follows: [ 1  4 -2 | 0 ] [-5 -20 10 | 0 ]Let's perform the Gaussian elimination operation to get the reduced row-echelon form of the augmented matrix.[1 4 -2 | 0]   (1) $\Leftrightarrow$   [1 4 -2 | 0][0 0 0 | 0]     (2) $\Leftrightarrow$   [0 0 0 | 0]From the above row-echelon form, we can write three equations:

1x + 4y - 2z = 00x + 0y + 0z = 0We can write the first equation as:x = -4y + 2zSubstituting x in terms of y and z in the above equation, we get:-4y + 2z = -4y + 2zThus, we get a basis for the solution space as follows:{(-4,1,0), (-2,0,1)}We can see that we have two vectors in the basis of the solution space, which indicates that the dimension of the solution space is 2. The basis for the solution space is {(-4,1,0), (-2,0,1)}.

To know more about  matrix visit:

https://brainly.com/question/29132693

#SPJ11

Answer : The death rate in City A for the Young age group is 3.59%

The death rate in City A for the Middle age group is 4.91%.

The death rate in City A for the Old age group is 21%.

Explanation :

As the investigator of the health statistics of City A and City B, it can be inferred that the investigation would involve comparing and contrasting the health indices of the two cities, City A and City B. It is also important to note that the two cities are part of County C.

For the purpose of this question, only the health statistics of City A have been presented, as shown below.

City A Population Deaths

Young 474 17

Middle 977 48

Old 1,800 378

It can be observed that the data provided includes information about the population, deaths, and age groups of City A.

In order to draw meaningful inferences from this data, we need to analyze it in some way. One way to do this is to calculate the death rates of the three age groups using the following formula:

Death rate = Number of deaths / Population * 1000

Using this formula, the death rates for the three age groups are as follows:

Young: 17 / 474 * 1000 = 35.9

Middle: 48 / 977 * 1000 = 49.1

Old: 378 / 1800 * 1000 = 210

In terms of death rates, it can be seen that the highest death rate is for the Old age group, with a death rate of 210 per 1000 population. This is followed by the Middle age group, with a death rate of 49.1 per 1000 population.

The lowest death rate is for the Young age group, with a death rate of 35.9 per 1000 population.

City A has a total population of 3,251 (474 + 977 + 1,800).

The age group that has the highest number of deaths in City A is Old.

The death rate in City A for the Young age group is 3.59%

.The death rate in City A for the Middle age group is 4.91%.

The death rate in City A for the Old age group is 21%.

In conclusion, we have analyzed the health statistics of City A, which is part of County C. The analysis involved calculating the death rates for the three age groups, which revealed that the Old age group had the highest death rate, followed by the Middle age group and the Young age group.

Learn more about Percentage here https://brainly.com/question/32197511

#SPJ11

5. P(X < -2.262) = 0.025.

7. P(Y < -1.325) = 0.096.

5. In order to find P(X < -2.262), we need to find the area to the left of -2.262 on a t-distribution with 9 degrees of freedom.

Using a t-table, we can look up the value of -2.262 and find the corresponding area. We get:

-2.262: 0.025 (from the table)

Therefore, P(X < -2.262) = 0.025.

7. To find P(Y < -1.325), we need to find the area to the left of -1.325 on a t-distribution with 14 degrees of freedom.

Using a t-table, we can look up the value of -1.325 and find the corresponding area. We get:

-1.325: 0.096 (from the table)

Therefore, P(Y < -1.325) = 0.096.

To learn more about distribution, refer below:

https://brainly.com/question/29664127

#SPJ11

The approximate angle measures in degrees of A, B and C in the solved triangle are A ≈ 65.9°, B ≈ 53.4° and C ≈ 61.7°.

Given data;

a = 5c = 4p = 117°

Let's find b using the law of cosine, since it involves 3 sides of a triangle.

b² = a² + c² - 2ac cos (p)

b² = 5² + 4² - 2(5)(4) cos (117°)

b² = 25 + 16 - 40 cos (117°)

b² = 41 + 40 cos (117°)

b = √(41 + 40 cos (117°))

b ≈ 1.0∠106°

The angles can be found using the law of sine.

sin A/a = sin B/b = sin C/c

sin A/5 = sin 117°/1.0

sin A ≈ 0.9°A ≈ 65.9°

sin B/1.0 = sin 117°/b

Sin B ≈ (1.0)(sin 117°)/b

Sin B ≈ (1.0)(sin 117°)/(√(41 + 40 cos (117°)))

B ≈ 53.4°C ≈ 61.7°

The approximate angle measures in degrees of A, B and C in the solved triangle are A ≈ 65.9°, B ≈ 53.4° and C ≈ 61.7°.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

The length of segment PL in the triangle is 7.

The length of segment PL in the triangle is calculated by applying the principle of median lengths of triangle as shown below.

From the diagram, we can see that;

length OL and JM are not in the same proportion

Using the principle of proportion, or similar triangles rules, we can set up the following equation and calculate the value of length PL as follows;

Length OP is congruent to length PM

length PM is given as 2, then Length OP = 2

Since the total length of OL is given as 9, the value of missing length PL is calculated as;

PL = OL - OP

PL = 9 - 2

PL = 7

Learn more about midsegments of triangles here: https://brainly.com/question/7423948

#SPJ1

Answer:

The slope of the line is 5.

Step-by-step explanation:

Formula: m = (y-y1)/(x-x1)

where m is the slope

Substitute the points given.

m = (7-(-3))/(3-1)

m = (7+3)/2

m = 10/2

m = 5

The average value of Young's module is 115.78 GPa.

Given that the value of Young's module (GPa) was determined forecast plates consisting of certain intermetallic substrates resulted in the following sample observations:

116.4 115.9 114.6 115.2 115.8.

We are to calculate the average value of Young's module.

The average value of the Young's module is calculated using the formula:

\text{Mean}=\frac{\text{Sum of the observations}}{\text{Number of observations}}

In the given problem, there are 5 observations, and they are:116.4115.9114.6115.2115.8

Hence, the average value of Young's module is:

\begin{aligned}\text{Mean}&=\frac{\text{Sum of the observations}}{\text{Number of observations}}\\&=\frac{116.4+115.9+114.6+115.2+115.8}{5}\\&=\frac{578.9}{5}\\&=115.78 \text{ GPa}\end{aligned}

Therefore, the average value of Young's module is 115.78 GPa.

Know more about average here:

https://brainly.com/question/130657

#SPJ11

in order to be very sure (μ+30) of accommodating the demand for a smoke-free area, there should be at least 93 seats in the non-smoking area of the restaurant.

To be very sure (μ+30) of accommodating the demand for a smoke-free area, we need to determine the number of seats that should be allocated to the non-smoking area in the restaurant.

Given that 60% of customers demand a smoke-free area, it implies that 40% of customers would prefer the smoking area. Therefore, we need to find the number of seats that accommodates at least 70% (60% + 10%) of the customers, which is equivalent to (μ + 30) seats.

Let's set up an equation to solve for μ, the number of seats in the non-smoking area:

0.7 * 133 = μ + 30

To solve for μ, we can rearrange the equation as follows:

0.7 * 133 - 30 = μ

Calculating the value on the left side of the equation:

0.7 * 133 - 30 = 93.1

Therefore, in order to be very sure (μ+30) of accommodating the demand for a smoke-free area, there should be at least 93 seats in the non-smoking area of the restaurant.

Learn more about demand here

https://brainly.com/question/29007185

#SPJ11

Given iterated integral is, 3 −3 √9 − x2 −√9 − x2 9 g(x, y, z) dz dy dx x2 y2.The iterated integral can be rewritten in 5 different orders of integration as follows: First order of integration:

[tex]3 −3 ∫(∫(∫9 g(x, y, z) dz) dy) dx where 0 ≤ z ≤ √(9 - x^2 - y^2), -3 ≤ y ≤ 3, -√(9 - x^2) ≤ x ≤ √(9 - y^2)[/tex].Second order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dx) dz) dy where -√(9 - z^2) ≤ x ≤ √(9 - z^2), -3 ≤ y ≤ 3, -3 ≤ z ≤ 3[/tex].Third order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dy) dz) dx where -√(9 - z^2 - x^2) ≤ y ≤ √(9 - z^2 - x^2), -√(9 - x^2) ≤ x ≤ √(9 - y^2), -3 ≤ z ≤ 3[/tex].Fourth order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dz) dx) dy where -√(9 - x^2 - y^2) ≤ z ≤ √(9 - x^2 - y^2), -√(9 - y^2) ≤ y ≤ √(9 - x^2), -3 ≤ x ≤ 3[/tex].Fifth order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dx) dy) dz where -√(9 - z^2 - y^2) ≤ x ≤ √(9 - z^2 - y^2), -√(9 - z^2) ≤ y ≤ √(9 - x^2), -3 ≤ z ≤ 3.[/tex]

To know more about  rewritten visit:

brainly.com/question/13072214

#SPJ11

The parametric representation for the part of the hyperboloid [tex]$x^2 + y^2 - z^2 = 1$[/tex] that lies to the left of the [tex]$xz$[/tex]-plane is:

[tex]$$\begin{aligned} x &= \sec u\cos v\\ y &= \sec u\sin v\\ z &= \tan u\\ \pi/2 &\le v \le 3\pi/2 \end{aligned}$$[/tex]

A parametric representation of a surface or curve is a way of expressing it using parameters. Parametric representation can be expressed as:[tex]$$\begin{aligned} x &= f(u, v)\\ y &= g(u, v)\\ z &= h(u, v) \end{aligned}$$[/tex]

Here we need to find a parametric representation for the part of the hyperboloid [tex]$x^2 + y^2 - z^2 = 1$[/tex] that lies to the left of the [tex]$xz$[/tex]-plane.

That is, for the region in the first and fourth quadrants of the [tex]$xz$[/tex]-plane.

For this, we can use the parameterization [tex]$x = \sec u\cos v$[/tex], [tex]$y = \sec u\sin v$[/tex], and [tex]$z = \tan u$[/tex].

With this parameterization, the condition [tex]$x^2 + y^2 - z^2 = 1$[/tex] becomes [tex]$\sec^2 u - \tan^2 u = 1$[/tex] which is always satisfied.

For the part of the hyperboloid that lies to the left of the [tex]$xz$[/tex]-plane, we have to restrict [tex]$v$[/tex] to the range [tex]$\pi/2 \le v \le 3\pi/2$[/tex].

This will ensure that [tex]$x = \sec u\cos v \le 0$[/tex].

Hence, the parametric representation for the part of the hyperboloid [tex]$x^2 + y^2 - z^2 = 1$[/tex] that lies to the left of the [tex]$xz$[/tex]-plane is:

[tex]$$\begin{aligned} x &= \sec u\cos v\\ y &= \sec u\sin v\\ z &= \tan u\\ \pi/2 &\le v \le 3\pi/2 \end{aligned}$$[/tex]

To know more about parametric representation, visit:

https://brainly.com/question/28990272

#SPJ11