We have two singular points: `x = 7` (regular singular point) and `cos x = 0` (irregular singular point). Given: `(x − 7 )°y"(x) + cos²(x)y'(x) + (x − 7 ) y(x) = − 0`
Let's take the equation `(x − 7 )°y"(x) + cos²(x)y'(x) + (x − 7 ) y(x) = − 0`... (1)
We can write the given equation (1) as: `(x - 7) [ (x - 7) y''(x) + cos^2(x) y'(x) + y(x)] = 0`
Singular points of the given equation are:
1. At `x = 7`.
This point is a regular singular point because both the coefficients `p(x)` and `q(x)` have a first-order pole (i.e., `p(x) = 1/(x - 7)` and
`q(x) = (x - 7)cos(x)`).2.
At `cos x = 0
This point is an irregular singular point because the coefficient `q(x)` has a second-order pole (i.e., `q(x) = cos²(x)`). Hence, this point is known as a turning point (because the coefficient `p(x)` is not zero at this point).
So, the singular points are `x = 7` (regular singular point) and `cos x = 0` (irregular singular point)
We have a differential equation given by: `(x − 7 )°y"(x) + cos²(x)y'(x) + (x − 7 ) y(x) = − 0`
We can write the given equation as: `(x - 7) [ (x - 7) y''(x) + cos²(x) y'(x) + y(x)] = 0`
Singular points of the given equation are:1. At `x = 7`.
This point is a regular singular point because both the coefficients `p(x)` and `q(x)` have a first-order pole (i.e., `p(x) = 1/(x - 7)` and `q(x) = (x - 7)cos²(x)`).
At `cos x = 0, `This point is an irregular singular point because the coefficient `q(x)` has a second-order pole (i.e., `q(x) = cos²(x)`).
Hence, this point is known as a turning point (because the coefficient `p(x)` is not zero at this point).
Therefore, we have two singular points: `x = 7` (regular singular point) and `cos x = 0` (irregular singular point).²
To know more about singular points, refer
https://brainly.com/question/15713473
#SPJ11
Find the linear approximation of the function f(x, y, z) = √x² + y² + z² at (6, 2, 3) and use it to approximate the number √✓(6.03)² + (1.98)² + (3.03)². f(6.03, 1.98, 3.03) ? (enter a fraction) Problem. 6: Find the linear approximation of the function f(x, y) = √/10 - 2x² - y² at the point (1, 2). f(x, y) ?
The f(x, y) = 3/2 - (4/3)·(x-1) - (4/3)·(y-2) is the linear approximation of the function f(x, y) = √/10 - 2x² - y² at the point (1, 2).
Let's find the linear approximation of the function f(x, y, z) = √x² + y² + z² at (6, 2, 3):
The function is
f(x, y, z) = √x² + y² + z².
Using the point (6, 2, 3), let's evaluate the gradient of f, ∇f.
∇f = <∂f/∂x, ∂f/∂y, ∂f/∂z>
∂f/∂x = x/√(x²+y²+z²)
∂f/∂y = y/√(x²+y²+z²)
∂f/∂z = z/√(x²+y²+z²)
Evaluating at (6,2,3), we obtain
∇f(6,2,3) = <6/7, 2/7, 3/7>
The linear approximation of f(x, y, z) = √x² + y² + z² near (6,2,3) is given by
L(x,y,z) = f(6,2,3) + ∇f(6,2,3)·
<(x-6), (y-2), (z-3)>
L(x,y,z) = 13/7 + (6/7)·(x-6) + (2/7)·(y-2) + (3/7)·(z-3)
The above is the linear approximation of f(x, y, z) = √x² + y² + z² at (6, 2, 3).
Now, let's use it to approximate the number
√(6.03)² + (1.98)² + (3.03)², f(6.03, 1.98, 3.03).
Substituting the values in the linear approximation obtained above:
L(6.03,1.98,3.03) = 13/7 + (6/7)·(0.03) + (2/7)·(-0.02) + (3/7)·(0.03)
L(6.03,1.98,3.03) = 91/35,
which is the approximate value of √(6.03)² + (1.98)² + (3.03)² using the linear approximation.
Finding the linear approximation of the function
f(x, y) = √/10 - 2x² - y² at the point (1, 2):
The function is
f(x, y) = √/10 - 2x² - y²
Using the point (1, 2), let's evaluate the gradient of f, ∇f.
∇f = <∂f/∂x, ∂f/∂y>
∂f/∂x = -4x/√(10-2x²-y²)
∂f/∂y = -2y/√(10-2x²-y²)
Evaluating at (1,2), we obtain
∇f(1,2) = <-4/3, -4/3>
The linear approximation of f(x, y) = √/10 - 2x² - y² near (1,2) is given by
L(x,y) = f(1,2) + ∇f(1,2)
·<(x-1), (y-2)>
L(x,y) = 3/2 - (4/3)·(x-1) - (4/3)·(y-2)
The above is the linear approximation of f(x, y) = √/10 - 2x² - y² at (1, 2).
Know more about the linear approximation
https://brainly.com/question/30403460
#SPJ11
Find two linearly independent series solutions of y" + (x-1)³y + (x² - 1)y=0 in powers of x-1. Write the first four nonzero terms of each solution. You don't need to find the convergence interval.
The differential equation y" + (x-1)³y + (x² - 1)y=0 can be solved by finding two linearly independent series solutions in powers of x-1. The first four nonzero terms of each solution are determined.
To find the series solutions, we assume a power series of the form y = ∑(n=0 to ∞) aₙ(x-1)ⁿ, where aₙ represents the coefficients. Substituting this into the given differential equation, we expand and equate the coefficients of like powers of (x-1).
For the first solution, let's assume y₁ = ∑(n=0 to ∞) aₙ(x-1)ⁿ. Substituting this into the differential equation and comparing coefficients, we find that the terms involving (x-1)⁰ and (x-1)¹ vanish, and we obtain the following recurrence relation for the coefficients: (n+3)(n+2)aₙ₊₂ + (n²-1)aₙ₊₁ = 0. Solving this recurrence relation, we can determine the first four nonzero terms of y₁.
For the second solution, let's assume y₂ = ∑(n=0 to ∞) bₙ(x-1)ⁿ. Substituting this into the differential equation and comparing coefficients, we find that the terms involving (x-1)⁰ and (x-1)¹ also vanish, and we obtain a different recurrence relation for the coefficients: (n+1)(n+2)bₙ₊₂ + (n²-1)bₙ₊₁ = 0. Solving this recurrence relation, we can determine the first four nonzero terms of y₂.
By finding the coefficients in the recurrence relations and evaluating the series, we can obtain the first four nonzero terms of each solution. These terms will provide an approximation to the solutions of the given differential equation in powers of x-1.
Learn more about differential equation here:
https://brainly.com/question/32538700
#SPJ11
Use Euler's method with step size h = 0.2 to approximate the solution to the initial value problem at the points x= 1.2, 1.4, 1.6, and 1.8 y' = (y² + y). y(1) .y(1)=2 Use Euler's method with h = 0.2 to generate the recursion formulas relating Xn. Yn Xn+1. and Yn+1- Xing X 0.2 Yn+1 Yn +0.2 Complete the table using Euler's method. n Xn Euler's Method 1 1.2 k 2 1.4 3 1.6 4 1.8 (Round to three decimal places as needed.) F
Using these recursion formulas, you can complete the table for n = 2, 3, and 4 to find the approximations of Yn+1.
To use Euler's method with a step size of h = 0.2 to approximate the solution to the initial value problem y' = (y² + y), y(1) = 2, we can generate the recursion formulas and complete the table as follows:
First, we define the function f(x, y) = y² + y. Then, we use the Euler's method recursion formulas:
Xn+1 = Xn + h
Yn+1 = Yn + h * f(Xn, Yn)
We start with X0 = 1 and Y0 = 2, and apply the recursion formulas to fill in the table:
n Xn Euler's Method Yn+1
1 1.2 1 + 0.2 = 1.2 Yn + 0.2 * f(1, Yn)
2 1.4 1.2 + 0.2 = 1.4 Yn + 0.2 * f(1.2, Yn)
3 1.6 1.4 + 0.2 = 1.6 Yn + 0.2 * f(1.4, Yn)
4 1.8 1.6 + 0.2 = 1.8 Yn + 0.2 * f(1.6, Yn)
To calculate the values of Yn+1, we substitute the corresponding Xn and Yn values into the function f(x, y) = y² + y.
For example, for n = 1, X1 = 1.2 and Y1 = 2, we have:
Y1+1 = Y1 + 0.2 * f(1, Y1)
= 2 + 0.2 * (2² + 2)
= 2 + 0.2 * 6
= 2 + 1.2
= 3.2
Using these recursion formulas, you can complete the table for n = 2, 3, and 4 to find the approximations of Yn+1.
To learn more about Euler's method visit:
brainly.com/question/30699690
#SPJ11
A firm manufactures a commodity at two different factories, Factory X and Factory Y. The total cost (in dollars) of manufacturing depends on the quantities, and y produced at each factory, respectively, and is expressed by the joint cost function: C(x, y) = 2x² + xy + 8y² + 1600 A) If the company's objective is to produce 1,300 units per month while minimizing the total monthly cost of production, how many units should be produced at each factory? (Round your answer to whole units, i.e. no decimal places.) To minimize costs, the company should produce: at Factory X and at Factory Y B) For this combination of units, their minimal costs will be dollars. (Do not enter any commas in your answer.)
To calculate the minimal costs associated with this production combination, we substitute these values back into the cost function. Plugging in x = 600 and y = 700, we have: C(600, 700) = 2(600)² + (600)(700) + 8(700)² + 1600. Evaluating this expression, we can determine the minimal costs in dollars.
To find the optimal production quantities that minimize the total cost, we need to minimize the cost function C(x, y) = 2x² + xy + 8y² + 1600, subject to the constraint x + y = 1,300.
We can use the method of Lagrange multipliers to solve this optimization problem. Setting up the Lagrangian function L(x, y, λ) = 2x² + xy + 8y² + 1600 + λ(x + y - 1,300), we can find the critical points by taking partial derivatives and setting them equal to zero.
∂L/∂x = 4x + y + λ = 0
∂L/∂y = x + 16y + λ = 0
∂L/∂λ = x + y - 1,300 = 0
Solving this system of equations, we can find the values of x and y that minimize the cost function while satisfying the production constraint.
After solving the system, we find that x = 600 and y = 700. Therefore, the company should produce 600 units at Factory X and 700 units at Factory Y in order to minimize the total cost while producing 1,300 units per month.
To calculate the minimal costs associated with this production combination, we substitute these values back into the cost function. Plugging in x = 600 and y = 700, we have:
C(600, 700) = 2(600)² + (600)(700) + 8(700)² + 1600.
Evaluating this expression, we can determine the minimal costs in dollars.
Learn more about Lagrangian function here:
https://brainly.com/question/32644877
#SPJ11
find the roots of the following equations. Use tables to display your iterations. Decimal places up to 5 places, if applicable. Box your final answers. I. Bisection Method Equation: f(x) = x³ + 2x²+x-1 Tolerance: x10-5 Assume a = 0; b=3 False Position Method Equation: f(x)=2x - x - 1.7 Tolerance: x 10-5 Assume x = 0; b = 2 III. Newton Rhapson Method II. Equation: f(x) = 5cos(x) + sin(x) - 2sec(x) Tolerance: x10-5 Assume x = 0.5 (in radian)
To solve the given equations using different methods, let's summarize the results obtained from each method.
I. Bisection Method:
Equation: f(x) = x³ + 2x² + x - 1
Tolerance: x10^-5
Assume a = 0; b = 3
Using the bisection method, the iterations for finding the roots are as follows:
Iteration 1: [a, b] = [0, 3], c = 1.5, f(c) = 4.375
Iteration 2: [a, b] = [0, 1.5], c = 0.75, f(c) = -0.609375
Iteration 3: [a, b] = [0.75, 1.5], c = 1.125, f(c) = 1.267578
Iteration 4: [a, b] = [0.75, 1.125], c = 0.9375, f(c) = 0.292969
Iteration 5: [a, b] = [0.9375, 1.125], c = 1.03125, f(c) = 0.154297
Iteration 6: [a, b] = [1.03125, 1.125], c = 1.07813, f(c) = 0.0715332
Iteration 7: [a, b] = [1.07813, 1.125], c = 1.10156, f(c) = 0.0310364
Iteration 8: [a, b] = [1.10156, 1.125], c = 1.11328, f(c) = 0.0130234
Iteration 9: [a, b] = [1.11328, 1.125], c = 1.11914, f(c) = 0.00546265
Iteration 10: [a, b] = [1.11914, 1.125], c = 1.12207, f(c) = 0.00228691
The root of the equation using the bisection method is approximately 1.12207.
II. False Position Method:
Equation: f(x) = 2x - x - 1.7
Tolerance: x10^-5
Assume a = 0; b = 2
Using the false position method, the iterations for finding the roots are as follows:
Iteration 1: [a, b] = [0, 2], c = 0.85, f(c) = -1.55
Iteration 2: [a, b] = [0.85, 2], c = 1.17024, f(c) = -0.459759
Iteration 3: [a, b] = [1.17024, 2], c = 1.35877, f(c) = -0.134614
Iteration 4: [a, b] = [1.35877, 2], c = 1.44229, f(c) = -0.0394116
Iteration 5: [a, b] = [1.44229, 2], c = 1.472, f(c) = -0.0115151
Iteration 6: [a, b] = [1.472, 2], c = 1.48352, f(c) = -0.00336657
Iteration 7: [a, b] = [1.48352, 2], c = 1.48761, f(c) = -0.000985564
The root of the equation using the false position method is approximately 1.48761.
III. Newton-Raphson Method:
Equation: f(x) = 5cos(x) + sin(x) - 2sec(x)
Tolerance: x10^-5
Assume x = 0.5 (in radians)
Using the Newton-Raphson method, the iterations for finding the roots are as follows:
Iteration 1: x₀ = 0.5, f(x₀) = 3.10354
Iteration 2: x₁ = 0.397557, f(x₁) = 1.31235
Iteration 3: x₂ = 0.383614, f(x₂) = 0.259115
Iteration 4: x₃ = 0.38353, f(x₃) = 0.000434174
Iteration 5: x₄ = 0.38353, f(x₄) = 2.54199e-10
The root of the equation using the Newton-Raphson method is approximately 0.38353.
To know more about Bisection Method click here: brainly.com/question/32563551
#SPJ11
You were given 40 shares of stock the day you turned 18.
Financial Weekly listed the stock today at $32. 67.
On your birthday, the value of the stock was $15. 10 per share. If you were to sell the stock today, determine the total amount you would receive
The total amount received from selling the 40 shares of stock today, given a current value of $32.67 per share, would be $702.80.
To determine the total amount you would receive if you were to sell the stock today, we need to calculate the current value of the 40 shares.
Given that the stock is listed at $32.67 per share today, the current value of one share is $32.67. Therefore, the current value of 40 shares would be:
Current value = $32.67 * 40 = $1,306.80.
On your birthday, the value of the stock was $15.10 per share. Therefore, the value of one share at that time was $15.10. The total value of 40 shares on your birthday would be:
Value on birthday = $15.10 * 40 = $604.00.
To determine the total amount you would receive from selling the stock, you need to calculate the difference between the current value and the value on your birthday:
Total amount received = Current value - Value on birthday
= $1,306.80 - $604.00
= $702.80.
Therefore, if you were to sell the stock today, you would receive a total amount of $702.80.
For more such questions on stock
https://brainly.com/question/31211894
#SPJ8
Which of the following PDEs cannot be solved exactly by using the separation of variables u(x, y) = X(x)Y(y)) where we attain different ODEs for X(x) and Y(y)? Show with working why the below answer is correct and why the others are not Expected answer: 8²u a² = drª = Q[+u] = 0 dx² dy² Q[ u] = Q ou +e="] 'U Əx²
The partial differential equation (PDE) that cannot be solved exactly using the separation of variables method is 8²u/a² = ∂rª/∂x² + ∂²u/∂y² = Q[u] = 0. This PDE involves the Laplacian operator (∂²/∂x² + ∂²/∂y²) and a source term Q[u].
The Laplacian operator is a second-order differential operator that appears in many physical phenomena, such as heat conduction and wave propagation.
When using the separation of variables method, we assume that the solution to the PDE can be expressed as a product of functions of the individual variables: u(x, y) = X(x)Y(y). By substituting this into the PDE and separating the variables, we obtain different ordinary differential equations (ODEs) for X(x) and Y(y). However, in the given PDE, the presence of the Laplacian operator (∂²/∂x² + ∂²/∂y²) makes it impossible to separate the variables and obtain two independent ODEs. Therefore, the separation of variables method cannot be applied to solve this PDE exactly.
In contrast, for PDEs without the Laplacian operator or with simpler operators, such as the heat equation or the wave equation, the separation of variables method can be used to find exact solutions. In those cases, after separating the variables and obtaining the ODEs, we solve them individually to find the functions X(x) and Y(y). The solution is then expressed as the product of these functions.
In summary, the given PDE 8²u/a² = ∂rª/∂x² + ∂²u/∂y² = Q[u] = 0 cannot be solved exactly using the separation of variables method due to the presence of the Laplacian operator. The separation of variables method is applicable to PDEs with simpler operators, enabling the solution to be expressed as a product of functions of individual variables.
Learn more about diffential equations here: https://brainly.com/question/28921451
#SPJ11
Identify the property that justifies each step asked about in the answer
Line1: 9(5+8x)
Line2: 9(8x+5)
Line3: 72x+45
Answer:
Step-by-step explanation:
Line 2: addition is commutative. a+b=b+a
Line 3: multiplication is distributive over addition. a(b+c)=ab+ac
Check whether equation (1) and equation (2) below are linear with superposition.dx d²x M- +B dť² dt +KX=GΣ sine i=1 (1) dᎾ dt = Q + CAsin( Ꮎ + ) (2
Equation (1) is a linear differential equation, while equation (2) is a non-linear differential equation.
In equation (1), which represents a mechanical system, the terms involving the derivatives of the variable x are linear. The terms with the constant coefficients M, B, and K also indicate linearity. Moreover, the right-hand side of the equation GΣ sine(i=1) can be considered a linear combination of different sine functions, making equation (1) linear. Linear differential equations have the property of superposition, which means that if two solutions x₁(t) and x₂(t) satisfy the equation, then any linear combination of these solutions, such as c₁x₁(t) + c₂x₂(t), will also be a solution.
On the other hand, equation (2) represents a non-linear differential equation. The term on the left-hand side, dᎾ/dt, is the derivative of the variable Ꮎ and is linear. However, the right-hand side contains the term CAsin(Ꮎ + φ), which involves the sine function of Ꮎ. This term makes the equation non-linear because it introduces a non-linear dependence on the variable Ꮎ. Non-linear differential equations do not have the property of superposition, and the behavior of their solutions can be significantly different from linear equations.
Learn more about linear differential equation here:
https://brainly.com/question/30645878
#SPJ11
Arc Length and Curvature. 4. By the definition of limit, a vector-valued function is continuous if all of its component functions are continuous. (a) Consider the following function f(x) = { * sin() if x 0 0 if x=0 Show that f is continuous. Deduce that the vector-valued function r(t) = (t, f(t)) is continuous. (b) Show that the arc length of the curve defined by r' (t) from t = 0 tot = 1/2 is infinite. (Hint: Look at the following picture. To show that the arc length is infinite, we can show that the total length of green segments is infinite. Even much simpler, we can just show that the total length of blue vertical segments is infinite. So the only thing you need to do is to compute the total length of vertical blue segments and find that it is infinity.) у y = x sin (22) 26 -IE NE -15 ST -15 (c) (Bonus question) If a curve is parametrized by r(t) with the property that r' (t) is continuous, then the arc length of this curve from t = a to t = b is finite. In view of this fact, deduce that the function f(x) is differentiable but its derivative is discontinuous at x = 0. (Hint: We know that the arc length of a curve is defined by the limit of total length of inscribed polygons.¹ Try to show that any total length of inscribed polygon has a uniform upper bound.)
The function f is continuous. The function f can be divided into two parts: a constant function and a continuous function.
In the case of the continuous function, it is clear that it is continuous everywhere. Since the constant function is continuous everywhere, the function f is continuous everywhere. This implies that r(t) = (t, f(t)) is also continuous since both of its component functions are continuous
To show that the arc length of the curve defined by r' (t) from t = 0 to t = 1/2 is infinite, it is important to compute the total length of vertical blue segments and find that it is infinity. We know that the length of the green segments in the given picture is the square root of 1 + [f'(x)]^2.
Thus, the total length of the green segments can be obtained by integrating this expression from 0 to 1/2. However, we have to show that the length of the vertical blue segments is infinite.
To accomplish this, consider the function g(x) = x sin(1/x) for x > 0 and g(0) = 0.
This function has a derivative of zero at x = 0, which means that it is continuous at this point. The function g(x) oscillates more and more rapidly as x approaches zero.
As a result, the graph of the function becomes more and more jagged. In particular, the vertical distance between the graph of g(x) and the x-axis is always at least one.
Therefore, the total length of the vertical blue segments is infinite.
Since r' (t) is continuous, the arc length of the curve defined by r(t) from t = a to t = b is finite. If we apply this fact to the function f(x), we find that it is differentiable but its derivative is discontinuous at x = 0. The reason for this is that the function oscillates more and more rapidly as x approaches zero, which causes the derivative to become undefined at this point.
To know more about continuous visit:
brainly.com/question/31523914
#SPJ11
Add -1310 + (-29)10
Enter the binary equivalent of -13:
Enter the binary equivalent of -29:
Enter the sum in binary:
Enter the sum in decimal:
The sum of -1310 and (-29)10 is -1339. The sum in decimal is 14. The binary equivalent of -13 is 0011. The sum in decimal is 14.
To add -1310 and (-29)10, we can simply perform the addition operation.
-1310
(-29)10
-1339
Therefore, the sum of -1310 and (-29)10 is -1339.
To find the binary equivalent of -13, we can use the two's complement representation.
The binary equivalent of 13 is 1101. To find the binary equivalent of -13, we invert the bits (change 1s to 0s and 0s to 1s) and add 1 to the result.
Inverting the bits of 1101, we get 0010. Adding 1 to 0010, we obtain 0011.
Therefore, the binary equivalent of -13 is 0011.
Similarly, to find the binary equivalent of -29, we follow the same process.
The binary equivalent of 29 is 11101. Inverting the bits, we get 00010. Adding 1 to 00010, we obtain 00011.
Therefore, the binary equivalent of -29 is 00011.
To find the sum in binary, we can add the binary representations of -13 and -29:
0011 + 00011 = 001110
Therefore, the sum in binary is 001110.
To convert the sum in binary to decimal, we can evaluate its decimal value:
001110 in binary is equivalent to 14 in decimal.
Therefore, the sum in decimal is 14.
To know more about binary equivalent:
https://brainly.com/question/68067
#SPJ4
Find a power series for the function, centered at c, and determine the interval of convergence. 2 a) f(x) = 7²-3; c=5 b) f(x) = 2x² +3² ; c=0 7x+3 4x-7 14x +38 c) f(x)=- d) f(x)=- ; c=3 2x² + 3x-2' 6x +31x+35
We are required to determine the power series for the given functions centered at c and determine the interval of convergence for each function.
a) f(x) = 7²-3; c=5
Here, we can write 7²-3 as 48.
So, we have to find the power series of 48 centered at 5.
The power series for any constant is the constant itself.
So, the power series for 48 is 48 itself.
The interval of convergence is also the point at which the series converges, which is only at x = 5.
Hence the interval of convergence for the given function is [5, 5].
b) f(x) = 2x² +3² ; c=0
Here, we can write 3² as 9.
So, we have to find the power series of 2x²+9 centered at 0.
Using the power series for x², we can write the power series for 2x² as 2x² = 2(x^2).
Now, the power series for 2x²+9 is 2(x^2) + 9.
For the interval of convergence, we can find the radius of convergence R using the formula:
`R= 1/lim n→∞|an/a{n+1}|`,
where an = 2ⁿ/n!
Using this formula, we can find that the radius of convergence is ∞.
Hence the interval of convergence for the given function is (-∞, ∞).c) f(x)=- d) f(x)=- ; c=3
Here, the functions are constant and equal to 0.
So, the power series for both functions would be 0 only.
For both functions, since the power series is 0, the interval of convergence would be the point at which the series converges, which is only at x = 3.
Hence the interval of convergence for both functions is [3, 3].
To know more about convergence visit:
https://brainly.com/question/29258536
#SPJ11
The number of sales for a good is 246 in period 1, 702 in period 2, 456 in [4] period 3. Find the 3 period simple moving average centred on period 2. Comment on your result.
To find the three-period simple moving average centered on period 2, we will calculate the average of the sales values for periods 1, 2, and 3. The sales values are 246, 702, and 456, respectively.
To calculate the three-period simple moving average centered on period 2, we add up the sales values for periods 1, 2, and 3 and divide the sum by 3.
(246 + 702 + 456) / 3 = 1404 / 3 = 468
The three-period simple moving average centered on period 2 is 468.
This moving average gives us an indication of the average sales over the three periods, with more weight given to the sales values closer to period 2. In this case, the moving average of 468 suggests that the average sales during this three-period window is relatively lower compared to the sales in period 2, which was 702. It could indicate a decrease in sales during period 3 compared to the previous periods.
To learn more about average click here : brainly.com/question/897199
#SPJ11
Suppose that X is a continuous random variable that always take values between 2 and 6. (i.e., P(2 ≤ X ≤ 6) = 1)). Find a p.d.f. fX(x) and a c.d.f. FX(x) for X using Beta Distribution with parameters α = 3 and β = 5. Suppose that X is a normal random variable with mean 5 and variance 16. Find the exact value of P(X2 > 9).
The exact value of P([tex]X^2[/tex] > 9) is 0.25.
To find the probability P([tex]X^2[/tex] > 9), we first need to determine the distribution of X. Given that X is a continuous random variable that always takes values between 2 and 6 (i.e., P(2 ≤ X ≤ 6) = 1), we can use the Beta Distribution with parameters α = 3 and β = 5 to represent the probability density function (p.d.f.) and cumulative distribution function (c.d.f.) of X.
The p.d.f. of X can be expressed as fX(x) = [tex](x - 2)^2[/tex] * [tex](6 - x)^4[/tex] / B(3, 5), where B(3, 5) is the Beta function with parameters 3 and 5. This function captures the shape of the distribution and ensures that the total probability over the range [2, 6] is equal to 1.
The c.d.f. of X, denoted as FX(x), can be obtained by integrating the p.d.f. from 2 to x. It gives the probability that X takes on a value less than or equal to x. In this case, the c.d.f. is given by FX(x) = ∫[2, x] [tex](t - 2)^2[/tex] * [tex](6 - t)^4[/tex]/ B(3, 5) dt.
Now, to calculate P([tex]X^2[/tex] > 9), we need to find the range of X that satisfies this condition. Since X is normally distributed with a mean of 5 and a variance of 16, we know that X follows a normal distribution N(5, 16).
Taking the square root of both sides, we have X > 3 or X < -3. Since X is restricted to the range [2, 6], the only valid condition is X > 3. Therefore, we need to find P(X > 3).
Using the c.d.f. of X, we can calculate P(X > 3) as 1 - FX(3). Substituting the value of 3 into the c.d.f. equation, we get P(X > 3) = 1 - FX(3) = 1 - ∫[2, 3] [tex](t - 2)^2[/tex] * [tex](6 - t)^4[/tex]/ B(3, 5) dt.
Performing the integration and simplifying the expression, we find P(X > 3) = 0.25. Therefore, the exact value of P([tex]X^2[/tex]> 9) is also 0.25.
Learn more about Probability
brainly.com/question/31828911
#SPJ11
If x and y are positive integers such that 17x-19y=1. Find the value of x+y.
The value of x+y is 18.
To find the value of x+y, we need to solve the equation 17x - 19y = 1, where x and y are positive integers. We can rewrite the equation as 17x - 1 = 19y.
Since we are looking for positive integer solutions, we can start by examining the values of y. We notice that if we let y = 1, the right side of the equation becomes 19, which is not divisible by 17. Therefore, y cannot be 1.
Next, we try y = 2. Plugging this value into the equation, we have 17x - 1 = 19(2) = 38. Solving for x, we find x = 3.
So, when y = 2, x = 3, and the sum of x+y is 3 + 2 = 5. However, we need to find positive integer solutions. Continuing the pattern, for y = 3, we get x = 4, giving us a sum of x+y as 4 + 3 = 7.
By observing the pattern, we can see that the sum x+y increases by 2 for each subsequent value of y. Thus, when y = 9, x would be 18, resulting in a sum of x+y as 18 + 9 = 27. However, we are asked to find the value of x+y, not the values of x and y themselves.
Therefore, the value of x+y is 18, which is the final answer.
Learn more about equation here
https://brainly.com/question/29538993
#SPJ11
Calculate the weighted-average cost of the following inventory purchases: Date Quantity Purchased Cost per Unit May 4 33 $12.25 May 11 41 $13.87 May 29 37 $11.99
The weighted-average cost of the inventory purchases is approximately $12.75 per unit.
To calculate the weighted-average cost of inventory purchases, we need to multiply the quantity purchased by the cost per unit for each purchase, sum up the total cost, and divide it by the total quantity purchased.
Let's calculate the weighted-average cost:
Quantity Purchased on May 4: 33
Cost per Unit on May 4: $12.25
Total Cost on May 4: 33 * $12.25 = $404.25
Quantity Purchased on May 11: 41
Cost per Unit on May 11: $13.87
Total Cost on May 11: 41 * $13.87 = $568.67
Quantity Purchased on May 29: 37
Cost per Unit on May 29: $11.99
Total Cost on May 29: 37 * $11.99 = $443.63
Now, let's calculate the total cost and total quantity purchased:
Total Cost = $404.25 + $568.67 + $443.63 = $1,416.55
Total Quantity Purchased = 33 + 41 + 37 = 111
Finally, we can calculate the weighted-average cost:
Weighted-Average Cost = Total Cost / Total Quantity Purchased
Weighted-Average Cost = $1,416.55 / 111 ≈ $12.75
Therefore, the weighted-average cost of the inventory purchases is approximately $12.75 per unit.
Learn more about mean here:
https://brainly.com/question/30403137
#SPJ11
For the matrix, 12-2 A 11 1 3 (i) Find all the eigenvalues and corresponding eigenvectors. (ii) Determine the spectral radius of the matrix A (p(4)). (iii) Verify that SAS is a diagonal matrix, where S is the matrix of eigenvectors.
SAS-1 is a diagonal matrix with diagonal elements as eigenvalues of A. Hence, SAS is also a diagonal matrix. The matrix can be represented in the form A as shown below: 12 -2 A 11 1 3
(i) The matrix can be represented in the form A as shown below: 12 -2 A 11 1 3
Now, to find all the eigenvalues and corresponding eigenvectors, we will first find the determinant of A.
|A - λI| = 0
where λ is the eigenvalue of A and I is the identity matrix of order 3.
|A - λI| = [(12 - λ)(3 - λ)(-2 - λ) + 22(11 - λ)] + [-1(12 - λ)(-2 - λ) + 11(11 - λ)] + [2(1)(12 - λ) - 11(3 - λ)] = 0
Simplifying the equation, we get
λ3 - 23λ2 - 28λ + 180 = 0
Factoring the above equation, we get
(λ - 4)(λ - 5)(λ - 9) = 0
Therefore, the eigenvalues of A are 4, 5, and 9. Now, we will find the eigenvectors corresponding to each eigenvalue. For the eigenvalue λ = 4, we have to solve the equation
(A - 4I)x = 0.
(A - 4I)x = 0 => (8 -2 11 1 -1 -1 3 -1) x = 0
The above equation can be written as follows:
8x1 - 2x2 + 11x3 = 0
x1 - x2 - x3 = 0
3x1 - x2 - x3 = 0
Solving the above equations, we get x = (1/√3) (1 1 1)
T as the eigenvector corresponding to λ = 4. Similarly, for the eigenvalue λ = 5, we get x = (1/√14) (3 1 -2)T as the eigenvector and for λ = 9, we get x = (1/√14) (1 -3 2)T as the eigenvector. '
(ii) The spectral radius of a matrix A is the maximum of the absolute values of its eigenvalues. Therefore, spectral radius of the matrix A is given by max{|λ1|, |λ2|, |λ3|} = max{|4|, |5|, |9|} = 9. Hence, the spectral radius of A is 9.
(iii) We have to verify that SAS is a diagonal matrix, where S is the matrix of eigenvectors. We have already calculated the eigenvectors of A. Now, we will write the eigenvectors as columns of a matrix S.
S = (1/√3) 1 3 1 1 1 -2 √14 1 2
Next, we will calculate SAS-1. SAS-1 = (1/√3) 1 3 1 1 1 -2 √14 1 2 12 -2 11 1 3 (1/√3) 1 3 1 1 1 -2 √14 1 2 12 -2 11 1 3 (1/√3) 1 3 1 1 1 -2 √14 1 2−1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 = (1/√3) 4 0 0 0 5 0 0 0 9 (1/√3) 1 3 1 1 1 -2 √14 1 2−1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
SAS-1 is a diagonal matrix with diagonal elements as eigenvalues of A. Hence, SAS is also a diagonal matrix.
To know more about eigenvalues visit: https://brainly.com/question/29861415
#SPJ11
Find the limit if it exists. lim (7x+8) X→-2 Which of the following shows the correct expression after the limit properties have been applied? O A. lim 8 X→-2 B. 7. lim x X→-2 O C. 7. lim x. lim 8 X→-2 X-2 O D. 7. lim x+ lim 8 X→-2 X→-2
The correct expression after applying the limit properties to find the limit of (7x + 8) as x approaches -2 is option A: lim 8 as x approaches -2.
In the given limit, as x approaches -2, we substitute -2 for x in the expression 7x + 8:
lim (7x + 8) as x approaches -2 = 7(-2) + 8 = -14 + 8 = -6.
Therefore, the limit of (7x + 8) as x approaches -2 is -6.
To find the correct expression after applying the limit properties, we can break down the expression and apply the limit properties step by step.
In option A, the constant term 8 remains unchanged because the limit of a constant is the constant itself.
In options B, C, and D, the limit is applied separately to each term, which is incorrect.
The limit properties state that the limit of a sum of functions is equal to the sum of their limits when the limits of the individual functions exist.
However, in this case, the expression (7x + 8) is a single function, so the limit should be applied to the whole function.
Therefore, option A, lim 8 as x approaches -2, is the correct expression after applying the limit properties.
Learn more about Expression here:
https://brainly.com/question/11701178
#SPJ11
Consider the following table, and answer the following Two questions Q24. Find the linear regression equation ŷ=a+bx A) -9.54-0.60.x B) 13.11-0.81x C) y 10.16-0.67x Q25. The correlation coefficient (r) between X and Y is: A)-0.8987 B) 0.8632 C) -0.9603 X 3 Y 8 D)ŷ 10.11-0.71x 46 D) -0.9107 6 7 8 un 5 5 10 3
In the given table, we are asked to find the linear regression equation and the correlation coefficient between X and Y.
To find the linear regression equation, we need to calculate the slope (b) and the y-intercept (a) using the given data points. We can use the formula:
b = (nΣxy - ΣxΣy) / (nΣx^2 - (Σx)^2)
a = (Σy - bΣx) / n
where n is the number of data points, Σxy is the sum of the products of x and y, Σx is the sum of x values, Σy is the sum of y values, and Σx^2 is the sum of squared x values.
Once we have the values of a and b, we can form the linear regression equation ŷ = a + bx.
To calculate the correlation coefficient (r), we can use the formula:
r = (nΣxy - ΣxΣy) / √((nΣx^2 - (Σx)^2)(nΣy^2 - (Σy)^2))
This formula calculates the covariance between X and Y divided by the product of their standard deviations.
By comparing the calculated values of the linear regression equation with the given options, we can determine the correct answer. Similarly, by comparing the calculated correlation coefficient with the given options, we can find the correct answer for Q25.
Learn more about covariance here:
https://brainly.com/question/2618552
#SPJ11
Find the equation of the curve that passes through (1,3) given its slope equals 2x+2 at any point (x,y). Give your answer in the form y=f(x). LEIFE
We found the equation of the curve is y = x^2 + 2x + 2 , we found it by integrating the given slope equation, which is 2x + 2, with respect to x. Integrating 2x + 2 gives us x^2 + 2x + C, where C is the constant of integration.
To find the equation of the curve, we integrate the given slope equation, which is 2x + 2, with respect to x. Integrating 2x + 2 gives us x^2 + 2x + C, where C is the constant of integration.
Since the curve passes through the point (1,3), we can substitute the coordinates into the equation to solve for C. Plugging in x = 1 and y = 3, we get: 3 = 1^2 + 2(1) + C
3 = 1 + 2 + C
3 = 3 + C
C = 0
Substituting C = 0 back into the equation, we get: y = x^2 + 2x + 2
Therefore, the equation of the curve that passes through (1,3) with a slope of 2x + 2 at any point is y = x^2 + 2x + 2.
LEARN MORE ABOUT curve here: brainly.com/question/30511233
#SPJ11
I need help pleaseeeee
Answer:5674
Step-by-step explanation:
Find the angle that maximizes the area of an isosceles triangle with legs of length / = 12. (Use symbolic notation and fractions where needed. Enter your value in units of radians.) rad
To find the angle that maximizes the area of an isosceles triangle with legs of length 12, we need to determine the angle between the two legs that results in the largest area. The area of the triangle as a function of the angle θ: A(θ) = (1/2) * 12 * 12 * sin(θ/2).
Let's denote the angle between the legs of the isosceles triangle as θ. Since the triangle is isosceles, the other two angles of the triangle are also equal and each measures (180° - θ)/2 = 90° - θ/2.
The area of a triangle can be calculated using the formula A = (1/2) * base * height. In this case, the base of the triangle is the length of one of the legs, which is 12. The height can be determined by applying trigonometry.
Since the triangle is isosceles, the height can be found using the formula height = leg * sin(θ/2), where leg is the length of one of the legs. In this case, the height is 12 * sin(θ/2).
Now, we can express the area of the triangle as a function of the angle θ: A(θ) = (1/2) * 12 * 12 * sin(θ/2).
To find the maximum area, we need to find the value of θ that maximizes the function A(θ). We can achieve this by taking the derivative of A(θ) with respect to θ, setting it equal to zero, and solving for θ.
Once we have the value of θ that maximizes the area, we can convert it to radians to obtain the final answer.
Learn more about isosceles triangle here:
https://brainly.com/question/29774496
#SPJ11
Evaluate the integral ²2 1 x²+3x+2 dx. You must show all of your steps and how you arrived at your final answer and simplify your answer completely.[
To evaluate the integral ∫(2 to 1) of (x² + 3x + 2) dx, we can use the power rule for integration and the limits of integration.
The power rule states that ∫x^n dx = (1/(n+1)) * x^(n+1) + C, where C is the constant of integration. Applying this rule to each term in the integrand, we have:
∫(x² + 3x + 2) dx = (1/3) * x^3 + (3/2) * x^2 + 2x + C
To evaluate the definite integral with limits of integration from 2 to 1, we substitute the upper limit (2) into the antiderivative expression and subtract the result from the substitution of the lower limit (1).
Evaluating the integral at the upper limit:
[(1/3) * (2^3) + (3/2) * (2^2) + 2 * 2] = 8/3 + 6 + 4 = 26/3
Evaluating the integral at the lower limit:
[(1/3) * (1^3) + (3/2) * (1^2) + 2 * 1] = 1/3 + 3/2 + 2 = 13/6
Finally, we subtract the result at the lower limit from the result at the upper limit:
(26/3) - (13/6) = (52/6) - (13/6) = 39/6 = 6.5
Therefore, the value of the integral ∫(2 to 1) of (x² + 3x + 2) dx is 6.5.
To learn more about limits of integration, click here:
brainly.com/question/31994684
#SPJ11
Find the orthogonal trajectories of the family. Leave the solution in implicit form. 2.5x²-3y² = C
To find the orthogonal trajectories of the family defined by the equation 2.5x² - 3y² = C, (1) Differentiate the given equation with respect to x to find dy/dx. (2) Find the negative reciprocal of dy/dx to obtain the slope of the orthogonal trajectories.
Step 1: Differentiate the given equation with respect to x to find the derivative dy/dx:
d/dx (2.5x² - 3y²) = d/dx (C)
5x - 6y(dy/dx) = 0
Step 2: Solve for dy/dx:
6y(dy/dx) = 5x
dy/dx = 5x / (6y)
Step 3: Find the negative reciprocal of dy/dx to obtain the slope of the orthogonal trajectories. The negative reciprocal of dy/dx is given by:
m = -6y / (5x)
Step 4: Write the implicit equation of the orthogonal trajectories using the point-slope form of a line. Let the slope of an orthogonal trajectory be m and let (x, y) be a point on it. The equation of the orthogonal trajectory can be written as:
(y - y₀) = m(x - x₀)
Substituting the negative reciprocal slope, we have:
(y - y₀) = (-6y₀ / (5x₀))(x - x₀)
Simplifying this equation will provide the implicit form of the orthogonal trajectories.
For example, if we consider a specific point (x₀, y₀) on the original curve, we can write the equation of the orthogonal trajectory passing through that point. Let's choose (1, 1) as an example:
(y - 1) = (-6(1) / (5(1)))(x - 1)
5(y - 1) = -6(x - 1)
5y - 5 = -6x + 6
5y + 6x = 11
Thus, the implicit equation of the orthogonal trajectories is 5y + 6x = 11.
To learn more about equation Click Here: brainly.com/question/29657983
#SPJ11
Subject: Advanced Mathematics
Please answer comprehensively:
What are the pros and cons of the five methods of root finding: Bisection Method, Regula Falsi Method, Secant Method, Newton's Method, and Fixed-Point Iteration Method? How would you arrange them (with the first as the best and the last as the worst) depending on their efficiency, utility and applicability
The best method to use depends on the particular problem at hand, but in general, the methods can be ranked in order of efficiency and speed as follows:Newton's Method, Fixed-Point Iteration Method, Secant Method, Regula Falsi Method, Bisection Method.
The pros and cons of the five methods of root finding are:Bisection Method Bisection Method is a simple and robust technique that always converges if the function is continuous and there is a sign change in the interval. In terms of accuracy, it is the slowest method. The following are some of the benefits and drawbacks of the bisection method:Pros:It is simple and easy to implement.It is a robust technique that always converges.The method is a guaranteed way to find a root if the function is continuous and has a sign change in the interval.Cons:It is the slowest of the five methods discussed here.Regula Falsi Method Regula Falsi Method is a hybrid method that is more efficient than the bisection method but slower than the secant method. The following are some of the benefits and drawbacks of the regula falsi method:Pros:The method is a guaranteed way to find a root if the function is continuous and has a sign change in the interval.Cons:It is slower than the secant method and can be less accurate. It can become unstable in some instances if the brackets are not chosen carefully.Secant MethodThe Secant Method is more efficient than the bisection and regula falsi methods, but less efficient than the Newton and fixed-point iteration methods. The following are some of the benefits and drawbacks of the secant method:Pros:The method is a guaranteed way to find a root if the function is continuous and has a sign change in the interval.It is faster than the bisection and regula falsi methods.Cons:It is less efficient than the Newton and fixed-point iteration methods.It can be unstable in some cases.Newton's MethodNewton's Method is one of the most well-known root-finding techniques, with fast convergence and quadratic convergence. The following are some of the benefits and drawbacks of the Newton method:Pros:It is the fastest method and converges quadratically (the number of accurate decimal places doubles with each iteration).Cons:It is less stable than the bisection, regula falsi, and secant methods.Fixed-Point Iteration MethodThe Fixed-Point Iteration Method is a simple yet robust technique that can be used to find roots of functions that can be rewritten in the form g(x)=x. The following are some of the benefits and drawbacks of the fixed-point iteration method:Pros:It is a simple and easy-to-implement method that is guaranteed to converge under certain circumstances (for example, if the derivative of g(x) is less than one in absolute value).Cons:It is the slowest and least efficient method and can diverge if the derivative of g(x) is greater than one in absolute value or if the derivative changes sign.The best method to use depends on the particular problem at hand, but in general, the methods can be ranked in order of efficiency and speed as follows:Newton's Method, Fixed-Point Iteration Method, Secant Method, Regula Falsi Method, Bisection Method.
To know more about particular visit:
https://brainly.com/question/28320800
#SPJ11
subject : maths
assighment,
Q1
Application of maths in real life problems
5 application.
minimum 5 pages.
in your own word,
Mathematics is an essential part of everyday life. It is used in various aspects of life, including construction, engineering, medicine, technology, and many others.
There are many applications of mathematics in real-life problems. Below are some examples of how mathematics is applied in our daily life.
1. Banking: Mathematics is used in banking for various purposes. It is used to calculate interest rates on loans, savings, and mortgages. Banks also use mathematics to manage risks, compute profits and losses, and keep track of transactions.
2. Cooking: Mathematics is also used in cooking. To cook a meal, we need to measure the ingredients and cook them at the correct temperature and time. The recipe provides us with the necessary measurements and instructions to make the dish correctly.
3. Sports: Mathematics is used in various sports. For example, in football, mathematics is used to calculate the distance covered by a player, the speed of the ball, and the angle of the kick. Similarly, in cricket, mathematics is used to calculate the run rate, the number of runs needed to win, and the average score of a player.
4. Construction: Mathematics is used in construction for various purposes. It is used to calculate the length, width, and height of a building, as well as the angles and curves in a structure. Architects and engineers use mathematics to design buildings and ensure that they are stable and safe.
5. Medicine: Mathematics is used in medicine to analyze data and develop statistical models. Doctors and researchers use mathematics to study diseases, develop treatments, and make predictions about the spread of diseases.
Mathematics is an essential part of our daily life. We use it to solve various problems, both simple and complex. Mathematics is used in different fields such as banking, cooking, sports, construction, medicine, and many others. In banking, mathematics is used to calculate interest rates on loans and mortgages. It is also used to manage risks, compute profits and losses, and keep track of transactions.
In cooking, we use mathematics to measure the ingredients and cook them at the right temperature and time. In sports, mathematics is used to calculate the distance covered by a player, the speed of the ball, and the angle of the kick. In construction, mathematics is used to design buildings and ensure that they are stable and safe.
In medicine, mathematics is used to analyze data and develop statistical models. Doctors and researchers use mathematics to study diseases, develop treatments, and make predictions about the spread of diseases. Mathematics is also used in various other fields, including engineering, technology, and science.
In conclusion, mathematics is a fundamental tool that we use in our daily life. It helps us to solve problems, make decisions, and understand the world around us. The applications of mathematics are diverse and widespread, and we cannot imagine our life without it.
To know more about science visit:
brainly.com/question/935949
#SPJ11
For each number, enter the number of significant digits it contains.
Number
Number of significant digits
32.401
8.25 x 102
3.000
0.06
Answer:
5
3
4
1
Step-by-step explanation:
Any non-zero digit is significant. A zero between significant digits is significant. Place holder zeros are not significant. Zeros to the right of the decimal point are significant.
32.401 5
8.25 x 102 3
3.000 4
0.06 1
Pls help this is an exam question that chat GPT doesn't know :(
Answer:
A= 36, B=57, C=41, D=23 :)
Step-by-step explanation:
Determine the correct eigen values of the given matrix. A= 6 16 15 -5 Select one: a. 0,1,3 b. 1,3,3 c. 1,1,3 d. 0,1,1
To determine the eigenvalues of the given matrix A = [[6, 16], [15, -5]], we need to find the values of λ that satisfy the equation A - λI = 0, where I is the identity matrix.
Substituting the values into the equation, we have:
[[6 - λ, 16], [15, -5 - λ]] = 0
Taking the determinant of this matrix equation, we get:
(6 - λ)(-5 - λ) - (16)(15) = 0
Simplifying the equation further, we have:
(λ - 1)(λ + 3) = 0
Setting each factor equal to zero, we find two eigenvalues:
λ - 1 = 0 => λ = 1
λ + 3 = 0 => λ = -3
Therefore, the correct eigenvalues of the given matrix A are 1 and -3, which correspond to option (c) 1, 1, 3.
Learn more about matrix here: brainly.com/question/28180105
#SPJ11
Solve the equation with initial condition y(0) = 0. Problem 3. Consider the same dy da equation dy da = a√1-y² = a√1-y²
the solution to the given differential equation with initial condition y(0) = 0 is y = sin(a²/2).
The given differential equation is:dy/da = a√(1-y²)We have the initial condition, y(0) = 0.We have to solve this differential equation with this initial condition.Separating the variables, we have:dy/√(1-y²) = a.da
Integrating both sides, we get the required solution as:arcsin(y) = a²/2 + C (where C is a constant of integration)Now using the initial condition y(0) = 0, we get C = 0.Substituting the value of C in the above equation, we get:arcsin(y) = a²/2
Therefore, y = sin(a²/2)
We have to solve the differential equation dy/da = a√(1-y²) with the initial condition y(0) = 0. This is a separable differential equation. We will separate the variables and then integrate both sides to get the solution.
To separate the variables, we can move the y² term to the other side. So,dy/√(1-y²) = a.daIntegrating both sides with respect to their respective variables, we get arcsin(y) = a²/2 + C where C is a constant of integration. Now we will use the initial condition y(0) = 0.
Substituting the values, we get0 = arcsin(0) = a²/2 + CWe get C = 0.Substituting this value in the above equation, we getarcsin(y) = a²/2Therefore, y = sin(a²/2) is the required solution. We can verify this solution by substituting it in the differential equation and checking whether it satisfies the initial condition.
We can conclude that the solution is y = sin(a²/2).Therefore, the solution to the given differential equation with initial condition y(0) = 0 is y = sin(a²/2).
To know more about integration visit:
brainly.com/question/31744185
#SPJ11
On solving the above differential equation we get the solution of the given differential equation as y = 0.
Given that dy/da = a√(1-y²)
Also given y(0) = 0
We need to solve the above equation by separating variables.
So, we get, [tex]$\int\frac{1}{\sqrt{1-y^2}}dy$ = $\int a da$[/tex]
On integrating the above equation, we get
Arcsine of y = [tex]$\frac{a^2}{2}$[/tex] + C
Here C is constant of integration.
Putting the initial condition y(0) = 0, we get
0 = [tex]$\frac{a^2}{2}$[/tex] + C
=> [tex]C = - $\frac{a^2}{2}$[/tex]
So, we get [tex]\text{Arcsine of y} = $\frac{a^2}{2}$ - $\frac{a^2}{2}$[/tex]
=> Arcsine of y = 0
=> y = 0
Hence, the solution of the given differential equation with the initial condition is y = 0.
The given equation is dy/da = a√(1-y²).
The initial condition is y(0) = 0.
On solving the above differential equation we get the solution of the given differential equation as y = 0.
This is the final answer.
To know more about differential equation, visit:
https://brainly.com/question/32645495
#SPJ11
