determine whether the series converges or diverges. [infinity] n 5n3 2 n = 1

The regression equation of the given bivariate set of data with y as the response variable is y = 10.9 + 0.98x.

Given, the bivariate set of data with y as the response variable X y50.2 21.214.3 82.542.6 27.530 61.727.1 56.16.6 79.112.9 63.936.1 25.623.5 27.145.5 20.83

We have to perform regression analysis by the given data set.

In order to find the regression equation, we need to calculate the following terms:

∑X∑Y∑X²∑Y²∑XYN,

where N = number of data points

∑X = sum of all X values

∑Y = sum of all Y values

∑X² = sum of squares of all X values

∑Y² = sum of squares of all Y values

∑XY = sum of products of corresponding X and Y values

Now we will compute the values of the above terms and find the regression equation

∑X = 329.7

∑Y = 463.9

∑X² = 10733.19

∑Y² = 35562.69

∑XY = 12607.67N = 20Now, using the above formula we have:

Regression equation: y = 10.9 + 0.98x

Hence, the conclusion is that the regression equation of the given bivariate set of data with y as the response variable is y = 10.9 + 0.98x.

To know more about regression equation visit:

brainly.com/question/31969332

#SPJ11

Answer: b

Step-by-step explanation: 7% of 80 = 5.6

12% of 20=2.4

5.6+2.4=8.0

To calculate the overall average age of the animals at the rescue, we need to consider the proportions of dogs and cats and their respective average ages.

Let's calculate the overall average age:

Average age of dogs = 7 months

Average age of cats = 12 months

Proportion of dogs = 80% = 0.8

Proportion of cats = 20% = 0.2

Overall average age = (Proportion of dogs * Average age of dogs) + (Proportion of cats * Average age of cats)

                   = (0.8 * 7) + (0.2 * 12)

                   = 5.6 + 2.4

                   = 8

Therefore, the overall average age of the animals at the rescue is 8 months.

The correct answer is B) 8 months.

To know more about proportions visit-

brainly.com/question/31902872

#SPJ11

In the given problem, random samples of four different models of cars were selected and the gas mileage of each car was measured. The results are shown below:21 226 22 725 21
Given that,The null hypothesis H0: All the population means are equal. The alternative hypothesis H1: At least one population mean is different from the others .

To find the hypothesis test, we will use the one-way ANOVA test. We calculate the grand mean (X-bar) and the sum of squares between and within to obtain the F-test statistic. Let's find out the sample size (n), the total number of samples (N), the degree of freedom within (dfw), and the degree of freedom between (dfb).
Sample size (n) = 4 Number of samples (N) = n × 4 = 16 Degree of freedom between (dfb) = n - 1 = 4 - 1 = 3 Degree of freedom within (dfw) = N - n = 16 - 4 = 12 Total sum of squares (SST) = ∑(X - X-bar)2
From the given data, we have X-bar = (21 + 22 + 26 + 25) / 4 = 23.5
So, SST = (21 - 23.5)2 + (22 - 23.5)2 + (26 - 23.5)2 + (25 - 23.5)2 = 31.5 + 2.5 + 4.5 + 1.5 = 40.0The sum of squares between (SSB) is calculated as:SSB = n ∑(X-bar - X)2
For the given data,SSB = 4[(23.5 - 21)2 + (23.5 - 22)2 + (23.5 - 26)2 + (23.5 - 25)2] = 4[5.25 + 2.25 + 7.25 + 3.25] = 72.0 The sum of squares within (SSW) is calculated as:SSW = SST - SSB = 40.0 - 72.0 = -32.0
The mean square between (MSB) and mean square within (MSW) are calculated as:MSB = SSB / dfb = 72 / 3 = 24.0MSW = SSW / dfw = -32 / 12 = -2.6667
The F-statistic is then calculated as:F = MSB / MSW = 24 / (-2.6667) = -9.0
Since we are testing whether at least one population mean is different, we will use the F-test statistic to test the null hypothesis. If the p-value is less than the significance level, we will reject the null hypothesis. However, the calculated F-statistic is negative, and we only consider the positive F-values. Therefore, we take the absolute value of the F-statistic as:F = |-9.0| = 9.0The p-value corresponding to the F-statistic is less than 0.01. Since it is less than the significance level (α = 0.05), we reject the null hypothesis. Therefore, we can conclude that at least one of the population means is different from the others.

To know more about hypothesis visit :

https://brainly.com/question/29576929

#SPJ11

The absolute maximum value of the function f(x, y) = [tex]x^2[/tex] + xy + [tex]y^2[/tex] on the disc[tex]x^2[/tex] + [tex]y^2[/tex] ≤ 1 is 1, and the absolute minimum value is 0.

To find the absolute maximum and minimum values of the function on the given disc, we need to consider the extreme points of the disc.

First, let's analyze the boundary of the disc, which is defined by the equation [tex]x^2[/tex] +[tex]y^2[/tex] = 1. Since the function f(x, y) = [tex]x^2[/tex]+ xy + [tex]y^2[/tex] is continuous and the boundary of the disc is a closed and bounded region, according to the Extreme Value Theorem, the function will attain its maximum and minimum values on the boundary.

Next, we consider the points inside the disc. Since the function is a quadratic polynomial, it will have a minimum value at the vertex of the quadratic form. The vertex of [tex]x^2[/tex] + xy + [tex]y^2[/tex] is at the origin (0, 0), and the function value at this point is 0.

Therefore, the absolute maximum value of the function on the disc[tex]x^2[/tex] + [tex]y^2[/tex] ≤ 1 is 1, which occurs on the boundary of the disc, and the absolute minimum value is 0, which occurs at the center of the disc.

Learn more about Extreme Value Theorem here:

https://brainly.com/question/30760554

#SPJ11

A histogram is used to display the distribution of continuous data while a stem-and-leaf plot is used to display the distribution of small data set.There are three numbers in bin 1, two numbers in bin 2, four numbers in bin 3, six numbers in bin 4, and one number in bin 5.

Here is the histogram and stem-and-leaf plot with five bins for the given 16 randomly selected numbers from 2 to 200:HISTOGRAM:

There are five bins, with intervals 20: 1. 5-24 2. 25-44 3. 45-64 4. 65-84 5. 85-104

There are three numbers in bin 1, two numbers in bin 2, four numbers in bin 3, six numbers in bin 4, and one number in bin 5.  STEM-AND-LEAF:    5| 5  5|    6| 5  6  6|    7| 8  |  9| 9  9|     10| 0  0|     11| 7 |     12| 0  0  0  0  |     13|  |     14|  |     15|  |     16|  |     17|  |     18|  |     19| 1There are three numbers in the 50s, six numbers in the 60s, one number in the 70s, four numbers in the 80s, and two numbers in the 90s.

To know more about histogram visit:

https://brainly.com/question/16819077

#SPJ11

The y-intercept of the linear equation represented by the table is 8, so the correct option is C.

Here we have a function represented by the table:

x     y

-2    16

1      4

2      0

4      -8

7      -20

This seems to be a linear function, such that each time we increase the value of x by one unit, the value of y decreases by 4.

Then the equation is something like:

y = -4x + b

b is the y-intercept.

We can replace the values of a known point like (2, 0) to get:

0 = -4*2 + b

0 = -8 + b

8 = b

Then the line is:

y = -4x + 8

The y-intercept is 8, the correct option is C.

Learn more about linear equations at:

https://brainly.com/question/1884491

#SPJ1

The standard error for the sample proportion can be calculated using the formula sqrt((0.52*(1-0.52))/397).

In the given population, the proportion of observations with the desired characteristic is 52%. When sampling from this population with a sample size of n = 397, the sampling distribution of the sample proportion can be approximated by a normal distribution.

The mean of the sampling distribution will be equal to the population proportion, which is 52%. The standard deviation of the sampling distribution, also known as the standard error, can be calculated using the formula sqrt((p*(1-p))/n), where p is the population proportion and n is the sample size. Using the given information, the standard error can be computed.

To learn more about “distribution” refer to the https://brainly.com/question/27905732

#SPJ11

Z - score of tallest man is more , his height was more extreme .  

Here, we have,

Average height = 176.55 cm

Height of tallest man = 249 cm

Standard deviation = 7.23

z score of tallest man

= (249 - 176.55) / 7.23

= 10.02

Average height = 176.55 cm

Height of shortest  man = 120.2 cm

Standard deviation = 7.23

z score of smallest  man

= ( 176.55 - 120.2 )  / 7.23

= 7.79

Since Z - score of tallest man is more , his height was more extreme .  

Learn more about Normal Distribution here:

brainly.com/question/12421652

#SPJ4

complete question:

Use z scores to compare the given values. The tallest living man at one time had a height of 249 cm. The shortest living man at that time had a height of 120.2 cm. Heights of men at that time had a mean of 176.55 cm and a standard deviation of 7.23 cm. Which of these two men had the height that was more​ extreme?

False. In hypothesis testing, we make inferences about population parameters based on sample statistics.

False. In hypothesis testing, the objective is not to estimate the true mean or true proportion of a population directly. Instead, it focuses on making statistical inferences about population parameters based on sample data.

Hypothesis testing involves formulating null and alternative hypotheses, collecting a sample, calculating test statistics, and determining the likelihood of observing the sample data under the null hypothesis. The goal is to assess the evidence against the null hypothesis and make a decision about its validity.

Estimating population parameters is typically done through point estimation or interval estimation techniques, such as calculating sample means or proportions to estimate the true population mean or proportion. However, hypothesis testing and estimation are distinct concepts in statistical analysis.

To learn more about the “null hypothesis” refer to the https://brainly.com/question/4436370

#SPJ11

The number of ways to permute the letters 'a' through 'z' so that at least one of the strings "fish," "cat," or "rat" appears as a substring is 26! - 23!, where 26! represents the total number of permutations of all the letters from 'a' to 'z', and 23! represents the number of permutations where none of the given strings appear as substrings.

To calculate the number of ways to permute the letters 'a' through 'z' while ensuring that at least one of the strings "fish," "cat," or "rat" appears as a substring, we can subtract the number of permutations where none of these strings appear from the total number of permutations.

The total number of permutations of the 26 letters is given by 26!. However, this includes permutations where none of the given strings appear.

To find the number of permutations where none of the strings appear, we can consider them as distinct entities and calculate the number of permutations of the remaining 23 letters, which is represented by 23!.

Therefore, the number of ways to permute the letters 'a' through 'z' while ensuring that at least one of the strings "fish," "cat," or "rat" appears as a substring is 26! - 23!.

To learn more about permutations visit:

brainly.com/question/29855401

#SPJ11

The probability of the complement of event A, given the complement of event B, denoted as [tex]P(A^c|B^c)[/tex], cannot be determined based on the information provided.

To find [tex]P(A^c|B^c)[/tex], we need to know the conditional probability of the complement of event A given the complement of event B.

However, the information provided only includes the probabilities of events A, B, and their union.

The complement of event A, denoted as [tex]A^c[/tex], represents all outcomes that are not in event A. Similarly, the complement of event B, denoted as [tex]B^c[/tex], represents all outcomes that are not in event B.

To find [tex]P(A^c|B^c)[/tex], we would need additional information about the conditional probabilities or the intersection of [tex]A^c[/tex] and[tex]B^c[/tex].

Without this additional information, it is not possible to determine the value of [tex]P(A^c|B^c)[/tex] based solely on the given probabilities. Therefore, the probability of the complement of event A given the complement of event B cannot be determined.

To learn more about probability visit:

brainly.com/question/32004014

#SPJ11

The managers of a brokerage firm are interested in finding out if the number of new clients a broker brings in to the firm affects the sales generated by the broker.

They sample 12 brokers and determine that there is a correlation coefficient of r = 0.87.

Correlation coefficient is a statistical measure that measures the degree of association between two variables. Correlation coefficients range between -1 and 1. If the correlation coefficient is 0, it implies that there is no association between the two variables.

A correlation coefficient of 0.87 indicates a strong positive relationship between the number of new clients a broker brings in to the firm and the sales generated by the broker.

SummaryThe managers of a brokerage firm have sampled 12 brokers to determine if there is any association between the number of new clients a broker brings in to the firm and the sales generated by the broker. A correlation coefficient of 0.87 indicates a strong positive relationship between the two variables. Hence, it is possible that the number of new clients a broker brings in to the firm affects the sales generated by the broker.

Learn more about Correlation click here:

https://brainly.com/question/28175782

#SPJ11

The Taylor series for f(x) centered at a=8 for f(x) = ln(x) is given by:f(x) = ln(8) + (1/8)(x-8) - (1/64)(x-8)² + (1/192)(x-8)³ - (1/768)(x-8)⁴ + ...

To find the Taylor series for f(x) centered at a=8 for f(x) = ln(x), first, we need to find the values of f, f′, f″, f‴, ... at x=a. Then use them to construct the series.

The first several derivatives of f(x) = ln(x) are:

f(x) = ln(x)f′(x) = 1/xf″(x) = -1/x²f‴(x) = 2/x³f⁴(x) = -6/x⁴

The general formula for the Taylor series expansion of ln(x) about a=8 is:

f(x) = f(a) + f′(a)(x-a) + (1/2!) f″(a)(x-a)² + (1/3!) f‴(a)(x-a)³ + ... + (1/n!) fⁿ(a)(x-a)^ⁿ

The term f(a) is simply ln(8).

Since the derivatives of f(x) are equal to 1/x, -1/x², 2/x³, and so on, we can simplify the series to:

f(x) = ln(8) + (1/8)(x-8) - (1/64)(x-8)² + (1/192)(x-8)³ - (1/768)(x-8)⁴ + ...

The Taylor series for f(x) centered at a=8 for f(x) = ln(x) is given by:f(x) = ln(8) + (1/8)(x-8) - (1/64)(x-8)² + (1/192)(x-8)³ - (1/768)(x-8)⁴ + ...

Know more about Taylor series here:

https://brainly.com/question/28168045

#SPJ11

The region bounded by y = x^4 − x² and x = 0 to x = 2 can be rotated about the y-axis to form a solid of revolution. To calculate the volume of this solid, we'll need to use the disk method.  

The function y = x^4 − x² −−−−−√ is first solved for x in terms of y as follows:x^4 − x² − y² = 0x²(x² − 1) = y²x = ±√(y² / (x² − 1))Since we are rotating about the y-axis, we will be using cylindrical shells with radius x and height dx. Thus, the volume of the solid can be calculated using the integral as follows:V = ∫₀²2πx(y(x))dx= ∫₀²2πx((x^4 − x²)^(1/2))dxUsing u-substitution, let u = x^4 − x², so that du/dx = 4x³ − 2x.Substituting u for (x^4 − x²),

we can rewrite the integral as follows:V = 2π∫₀² x(u)^(1/2) / (4x³ − 2x) dx= π/2∫₀¹ 2u^(1/2) / (2u − 1) du [by substituting u for (x^4 − x²)]= π/2 ∫₀¹ [(2u − 1 + 1)^(1/2) / (2u − 1)] duLetting v = 2u − 1, we can rewrite the integral again as follows:V = π/2 ∫₋¹¹ [(v + 2)^(1/2) / v] dvBy u-substitution, let w = v + 2, so that dw/dv = 1. Substituting v + 2 for w and replacing v with w − 2, we can rewrite the integral once more:V = π/2 ∫₁ [(w − 2)^(1/2) / (w − 2)] dw= π/2 ln(w − 2) ∣₁∞= π/2 ln(2) ≈ 1.084 cubic units.

Answer: The volume of the solid obtained when the region under the curve y = x^4 − x² −−−−−√ from x = 0 to x = 2 is rotated about the y-axis is π/2 ln(2) ≈ 1.084 cubic units.

To Know more about cylindrical shells visit:

brainly.com/question/32139263

#SPJ11

We have the formula : n = (an - a1) / d + 1Sn = n / 2 (a1 + an)s = Sn - Sp where Sp is the sum of the first p terms of the sequence. In conclusion, finding the partial sum s, of the arithmetic sequence that satisfies the given conditions involves finding the first term, the common difference, and the number of terms in the sequence.

An arithmetic sequence is a sequence where every term has the same common difference, d. For instance, 2, 4, 6, 8, 10 is an arithmetic sequence with a common difference of 2. Each term in the sequence is found by adding the common difference to the previous term. The formula for the nth term, an, of an arithmetic sequence is given by: an = a1 + (n – 1)d .

Where a1 is the first term in the sequence and d is the common difference. Given an arithmetic sequence, we can find the sum of the first n terms using the formula: Sn = (n/2)(a1 + an)where Sn is the sum of the first n terms, a1 is the first term in the sequence, and an is the nth term in the sequence.

To find the partial sum, we need to know the first term, the common difference, and the number of terms in the sequence. We can then use the formula above to find the sum of the first n terms of the sequence. If we know the nth term of the sequence instead of the number of terms, we can use the formula for the nth term to find the number of terms, and then use the formula above to find the sum of the first n terms.

Thus, we have the formula : n = (an - a1) / d + 1Sn = n / 2 (a1 + an)s = Sn - Sp where Sp is the sum of the first p terms of the sequence. In conclusion, finding the partial sum s, of the arithmetic sequence that satisfies the given conditions involves finding the first term, the common difference, and the number of terms in the sequence.

To know more about Arithmetic  visit :

https://brainly.com/question/16415816

#SPJ11

Where the above are given,

(a) MLE of β: (nα + y₁ + y₂ + ... + yn)/n

(b) MLE of E(Y): (nα + y₁ + y₂ + ... + yn)/n

Maximum Likelihood Estimation (MLE) is   a statistical method used to estimate the parameters of a probability distribution by maximizing the likelihood function based on observed data.

(a) The MLE of β can be found by   maximizing the likelihood function. The likelihood function for  a gamma distribution is given by  -

L(β;  y₁, y₂, ..., yn) = (1/β^nαΓ(α))ⁿ * exp(-( y₁ + y₂ + ... + yn)/β)

Taking the logarithm of the likelihood function (log-likelihood) to simplify the calculations  -

log L(β;  y₁, y₂, ..., yn) =   n*log(1/β) + nα*log(β) - n*logΓ(α) - ( y₁ + y₂ + ... + yn)/β

To find the MLE of β, we differentiate the log-likelihood with respect to β, set it equal to zero, and solve for β  -

d/dβ(log L(β;  y₁, y₂, ..., yn)) = -n/β + nα/β² + ( y₁ + y₂ + ... + yn)/β² = 0

Simplifying the equation -

-n/β + nα/β^2 + ( y₁ + y₂ + ... + yn)/β² = 0

Multiplying through by β²

-nβ + nα + ( y₁ + y₂ + ... + yn) = 0

Rearranging  whave

nβ = nα + ( y₁ + y₂ + ... + yn)

Finally, solving for β -

β = (nα +  y₁ + y₂ + ... + yn)/n

Therefore, the MLE of β is (nα +  y₁ + y₂ + ... + yn)/n.

(b) The MLE of E(Y), the expected value of Y, is simply the MLE of β.

So, the MLE of E(Y) is (nα +  y₁ + y₂ + ... + yₙ)/n.

Learn more about MLE:
https://brainly.com/question/30513452
#SPJ4

The value of mean, μ is 6.5374 (approx) or 6.54 (rounded off to two decimal places). Hence, the correct option is 6.54.

Given that X is normally distributed with mean, μ, and standard deviation, μ and Pr(-2 < X < 12) = 0.4092.

Now, we need to find the value of mean, μ.

We can use the standard normal distribution to find the value of the mean, μ.z = (X - μ) / σwhere z is the z-score representing the standard normal distribution. σ is the standard deviation and μ is the mean.

The probability Pr(-2< X < 12) = 0.4092 can be rewritten as follows by standardizing the random variable Z.-2< Z < (12 - μ) / σ

Here, we are required to find the mean, μ.

To find μ, we first need to find the corresponding z-scores for -2 and (12 - μ) / σ using the standard normal distribution table.

The corresponding z-scores are -0.9772 and z2.

Using the z-scores,-0.9772 = Z2.

We can find the value of z from the standard normal distribution table. z = -0.9772z2 = (12 - μ) / σOn simplifying, we get,μ = 12 - σz2

We know that the area under the standard normal curve between z = -0.97 and z = 0 is 0.4092.

Therefore, we can find the value of z2 using the standard normal distribution table.-0.97 corresponds to 0.166 and z2 corresponds to 1 - 0.166 = 0.834.

Substituting the values of z2 and σ in the expression for μ,μ = 12 - σz2μ = 12 - μ * 0.834

On further simplification,μ + 0.834μ = 12μ (1 + 0.834) = 12μ = 12 / 1.834μ = 6.5374

Therefore, the value of the mean, μ is 6.5374 (approx) or 6.54 (rounded off to two decimal places). Hence, the correct option is 6.54.

Know more about the mean here:

https://brainly.com/question/1136789

#SPJ11

The standard deviation of the average (X) amount of sunscreen from a sample of 6 tubes is approximately 1.29 mL. The probability that the average amount of sunscreen from 6 tubes will be less than 338 mL is about 0.9999.

To calculate the standard deviation of the average X, we can use the formula for the standard deviation of the sample mean:

σ(X) = α / √n,

where α is the standard deviation of the population, and n is the sample size. In this case, α = 5 mL and n = 6. Plugging in these values, we get:

σ(X) = 5 / √6 ≈ 1.29 mL.

This tells us that the average amount of sunscreen from a sample of 6 tubes is expected to vary by about 1.29 mL.

To find the probability that the average amount of sunscreen from 6 tubes will be less than 338 mL, we need to standardize the value using the formula for z-score:

z = (x - μ) / α,

where x is the value we want to find the probability for, μ is the mean of the population, and α is the standard deviation of the population. In this case, x = 338 mL, μ = 298 mL, and α = 5 mL. Plugging in these values, we get:

z = (338 - 298) / 5 = 8,

which means that the average amount of sunscreen from 6 tubes is 8 standard deviations above the mean. Since we are dealing with a normal distribution, the probability of being less than 8 standard deviations above the mean is extremely close to 1, or about 0.9999.

To know more about standard deviation, refer here:

https://brainly.com/question/13498201#

#SPJ11

There is insufficient evidence at a significance level of 0.05 to conclude that the mean length for all rods is different from 25 cm so the factory will not be considered to have evidence that the mean length is different from 25 cm based on the given data.

Null hypothesis (H0): The mean length of all rods is 25 cm.

Alternative hypothesis (Ha): The mean length of all rods is different from 25 cm.

Calculate the sample mean (X) and sample standard deviation (s) from the given data:

X = (23.5 + 24.2 + 24.2 + 23.4 + 20.8 + 24.7 + 21.8 + 26.8 + 22.7 + 22.2 + 24.2 + 21.3) / 12

= 24.025 cm

s = √[Σ(xi - X)² / (n - 1)]

= √[(23.5 - 24.025)² + (24.2 - 24.025)² + ... + (21.3 - 24.025)²] / 11

= 1.590 cm

Calculate the test statistic (t-value):

t = (X- μ) / (s / √n)

where μ is the assumed population mean (25 cm), s is the sample standard deviation, and n is the sample size.

t = (24.025 - 25) / (1.590 / √12)

= -1.491

Since the alternative hypothesis is two-tailed, we need to find the critical t-value with (n - 1) degrees of freedom (11 degrees of freedom for 12 data points) and a significance level of 0.05.

Using a t-distribution table the critical t-value for a two-tailed test with α = 0.05 and 11 degrees of freedom is approximately ±2.201.

Since |-1.491| < 2.201, the test statistic does not fall in the rejection region.

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ4

Since -1 ≤ cos A ≤ 1, this triangle does not exist, as the cosine of an angle cannot be less than -1.

In a triangle, given a = 6, b = 2 and c = 5, we need to find the angle measures.

We can use the law of cosines to find the unknown angle:

cos A = (b² + c² - a²) / 2bc

Now we can substitute the given values and simplify:

cos A = (2² + 5² - 6²) / (2×2×5)

cos A = -15/20

cos A = -0.75

Since -1 ≤ cos A ≤ 1, this triangle does not exist, as the cosine of an angle cannot be less than -1.

Thus, we would enter NA in each answer area.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

The triangle ABC is not valid since the sum of the angles of the triangle must be exactly 180°.

Given data: a = 6, b = 2, c = 5To solve the triangle, we can use the law of cosines.

The law of cosines states that for any triangle ABC with sides a, b, and c, and angle A opposite side a, the following formula holds:

c² = a² + b² - 2abcos( A) Similarly, b² = a² + c² - 2accos( B) And, a² = b² + c² - 2bccos( C)

Solving for the angle A:

cos( A) = (b² + c² - a²)/(2bc)

cos( A) = (2² + 5² - 6²)/(2×2×5)

cos( A) = (4+25-36)/20

cos( A) = -0.35A = cos⁻¹ (-0.35)A

≈ 109.47°

Solving for the angle B:

cos( B) = (a² + c² - b²)/(2ac)

cos( B) = (6² + 5² - 2²)/(2×6×5)

cos( B) = (36+25-4)/60

cos( B) = 0.85B

= cos⁻¹ (0.85)B

≈ 31.8°

Solving for the angle C:

cos( C) = (a² + b² - c²)/(2ab)

cos( C) = (6² + 2² - 5²)/(2×6×2)

cos( C) = (36+4-25)/24

cos( C) = 0.25C

= cos⁻¹ (0.25)C

≈ 75.5°

The angles of the triangle ABC are A ≈ 109.47°, B ≈ 31.8°, and C ≈ 75.5°.

The sum of the angles of the triangle is 216.77°, which is slightly more than 180°.

Therefore, the triangle ABC is not valid since the sum of the angles of the triangle must be exactly 180°.

Therefore, the triangle does not exist. Thus, the answer is NA.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

In this experiment, the fluidized bed drying system was used to dry Material A. The experiment was conducted to study the relationship between the drying time and the grams of solids removed from Material A.

The experiment resulted in ten observations, which were recorded as follows: x  2.0  3.0  4.0  5.0  6.0  7.0  8.0  9.0  10.0  11.0y  27.0  38.0  52.0  65.0  81.0  98.0  118.0  136.0  160.0  180.0.

The data obtained from the experiment is given in the table above. The next step is to plot the data on a scatter plot. The scatter plot helps us to visualize the relationship between the two variables, i.e., drying time (x) and the grams of solids removed from Material A (y).

The scatter plot for this experiment is shown below: From the scatter plot, it is evident that the relationship between the two variables is linear, which means that the grams of solids removed from Material A are directly proportional to the drying time.

The next step is to find the equation of the line that represents this relationship. The equation of the line can be found using linear regression analysis. The regression equation is as follows:[tex]y = 12.48x + 3.086[/tex]

The regression equation tells us that for every unit increase in drying time, the grams of solids removed from Material A increase by 12.48.

To know more about experiment visit:

https://brainly.com/question/17314369

#SPJ11

The standard deviation of the given data can be calculated using the formula for the population standard deviation:

Standard deviation = √[∑(X - μ)² * f / N]

where X is the data value, μ is the mean, f is the frequency, and N is the total number of observations.

Given the data:

X: 3 4 5 6 7 8 9

f: 37 8 10 12 4 3 2

Assumed mean (μ) = 6

To calculate the standard deviation, we need to calculate the squared difference between each data value and the mean, multiply it by the frequency, and sum up these values. Then divide the sum by the total number of observations (N) and take the square root of the result.

Let's calculate it step by step:

(X - μ)² * f:

(3 - 6)² * 37 = 111

(4 - 6)² * 8 = 32

(5 - 6)² * 10 = 10

(6 - 6)² * 12 = 0

(7 - 6)² * 4 = 4

(8 - 6)² * 3 = 12

(9 - 6)² * 2 = 18

Sum of (X - μ)² * f = 187

Now divide the sum by the total number of observations (N = 37 + 8 + 10 + 12 + 4 + 3 + 2 = 76) and take the square root of the result:

Standard deviation = √(187 / 76) ≈ 1.82

Therefore, the standard deviation of the given data is approximately 1.82.

Learn more about Standard deviation here: brainly.com/question/29808998

#SPJ11

The forecasted demand for September using the 3-month moving average method is 380 units.

To forecast demand for the best-selling product, you can use various forecasting methods.

One simple and commonly used method is the moving average method.

The moving average forecast is calculated by taking the average of the historical data points over a specific time period.

The choice of the time period depends on the nature of the data and the desired level of smoothing.

In this case, let's use a 3-month moving average to forecast demand.

Month      Demand

May        420

June       180

July       500

August     260

1. Calculate the moving average for each month:

  - Moving average for June: (420 + 180) / 2 = 300

  - Moving average for July: (180 + 500) / 2 = 340

  - Moving average for August: (500 + 260) / 2 = 380

2. The forecasted demand for the next month (September) would be the moving average for August, which is 380.

To know more about 3-month moving average refer here:

https://brainly.com/question/32349777#

#SPJ11

The probabilities are (a) P(X = 2) = 3/64, (b) P(X ≤ 2) = 9/16, (c) P(X > 2) = 0, and (d) P(X ≥ 1) = 3/8.

Given a function:

f(x) = (3/4)(1 / 4)*, x = 0,1,2.

Let's find the probability of f(x).

The formula for finding probability is given below:

∑ f(x) = 1

From the above formula, we have 3 equations:(

3/4)(1/4) + (3/4)(1/4) + (3/4)(1/4) = 1(3/16) + (3/16) + (3/16)

= 1(9/16)

= 1

So, it is a probability mass function. Now, let's determine the probabilities.

(a) P(X = 2)f(x) = (3/4)(1 / 4)*,

for x = 2= (3/4)(1/16)

= 3/64(b) P(X ≤ 2)P(X ≤ 2)

= f(0) + f(1) + f(2)= (3/4)(1/4) + (3/4)(1/4) + (3/4)(1/4)

= 3/16 + 3/16 + 3/16

= 9/16(c) P(X > 2)P(X > 2)

= f(0) = 0(d) P(X ≥ 1)P(X ≥ 1)

= f(1) + f(2)= (3/4)(1/4) + (3/4)(1/4)

= 3/16 + 3/16

= 6/16

= 3/8

Therefore, the probabilities are (a) P(X = 2) = 3/64,

(b) P(X ≤ 2) = 9/16,

(c) P(X > 2) = 0, and (d) P(X ≥ 1) = 3/8.

To know more about probabilities visit:

https://brainly.com/question/29381779

#SPJ11

To compute Empirical Probability, you must observe the outcomes of the variable over a period of time.

Empirical probability is the probability that comes from actual experiments or observations. Empirical probability is calculated by counting the number of times an event of interest occurs in an experiment or observation, then dividing by the total number of trials or observations. Empirical probability is an estimate based on observed data. The larger the number of trials or observations, the closer the empirical probability is to the true probability. To find empirical probability, follow the below steps: Count the number of times the event of interest happened. (The event can be the result of a coin toss, the number on a dice, or any other simple occurrence.)Divide that by the total number of trials or observations. (The sample space, in other words.)Express this ratio as a decimal or a fraction. This is the empirical probability.

Know more about Empirical Probability here:

https://brainly.com/question/27709173

#SPJ11

the dose (in mg) that yields the maximum reaction is 1800 mg (rounded off to the nearest integer).

The given equation for the reaction r(x) to an injection of a drug related to the dose x (in milligrams) is:

r(x) = x²⁷⁰⁰ − x³

The dose (in mg) that yields the maximum reaction is to be determined from the given equation.

To find the dose (in mg) that yields the maximum reaction, we need to differentiate the given equation w.r.t x as follows:

r'(x) = 2x(2700) - 3x² = 5400x - 3x²

Now, we need to equate the first derivative to 0 in order to find the maximum value of the function as follows:

r'(x) = 0

⇒ 5400x - 3x² = 0

⇒ 3x(1800 - x) = 0

⇒ 3x = 0 or 1800 - x = 0

⇒ x = 0

or x = 1800

The above two values of x represent the critical points of the function.

Since x can not be 0 (as it is a dosage), the only critical point is:

x = 1800

Now, we need to find out whether this critical point x = 1800 is a maximum point or not.

For this, we need to find the second derivative of the given function as follows:

r''(x) = d(r'(x))/dx= d/dx(5400x - 3x²) = 5400 - 6x

Now, we need to check the value of r''(1800).r''(1800) = 5400 - 6(1800) = -7200

Since the second derivative r''(1800) is less than 0, the critical point x = 1800 is a maximum point of the given function. Therefore, the dose (in mg) that yields the maximum reaction is 1800 mg (rounded off to the nearest integer).

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

To find the inverse of a matrix, we'll denote the given matrix as A:

A = [1 2; 5 9]

How to find the Inverse of a Matrix

We can calculate the determinant of matrix A and see if there is an inverse. Inverse exists if the determinant is non-zero. Otherwise, the inverse does not exist (abbreviated as "dne") if the determinant is zero.

Calculating the determinant of A:

det(A) = (1 * 9) - (2 * 5) = 9 - 10 = -1

Since the determinant is not zero (-1 ≠ 0), the inverse of matrix A exists.

Next, we can find the inverse by using the formula:

A^(-1) = (1/det(A)) * adj(A)

where adj(A) denotes the adjugate of matrix A.

The cofactor matrix, which is created by computing the determinants of the minors of A, is needed to calculate the adjugate of A.

Calculating the cofactor matrix of A:

C = [9 -5; -2 1]

The cofactor matrix C is obtained by changing the sign of every other element in A and transposing it.

Finally, we can calculate the inverse of A:

A^(-1) = (1/det(A)) * adj(A)

= (1/-1) * [9 -5; -2 1]

= [-9 5; 2 -1]

Therefore, the inverse of the given matrix is:

A^(-1) = [-9 5; 2 -1]

Learn more about Inverse of a Matrix here brainly.com/question/12442362

#SPJ4

Answer : 1) Exactly two breakdowns is 0.084.2) At most one breakdown is 0.047.3) At least four breakdowns is 0.729.

Explanation : Given that a washing machine in a laundromat breaks down an average of five times per month.

Let X be the number of breakdowns in a month. Then X follows the Poisson distribution with mean µ = 5.So, P(X = x) = (e-µ µx) / x!Where e = 2.71828 is the base of the natural logarithm.

Exactly two breakdowns

Using the Poisson distribution formula, P(X = 2) = (e-5 * 52) / 2! = 0.084

At most one breakdown

Using the Poisson distribution formula,P(X ≤ 1) = P(X = 0) + P(X = 1)P(X = 0) = (e-5 * 50) / 0! = 0.007 P(X = 1) = (e-5 * 51) / 1! = 0.04 P(X ≤ 1) = 0.007 + 0.04 = 0.047

At least four breakdowns

P(X ≥ 4) = 1 - P(X < 4) = 1 - [P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3)]P(X = 0) = (e-5 * 50) / 0! = 0.007 P(X = 1) = (e-5 * 51) / 1! = 0.04 P(X = 2) = (e-5 * 52) / 2! = 0.084 P(X = 3) = (e-5 * 53) / 3! = 0.14

P(X < 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) = 0.007 + 0.04 + 0.084 + 0.14 = 0.271P(X ≥ 4) = 1 - 0.271 = 0.729

Therefore, the probability that during the next month the machine will have:1) Exactly two breakdowns is 0.084.2) At most one breakdown is 0.047.3) At least four breakdowns is 0.729.

Learn more about Poisson distribution here https://brainly.com/question/30388228

#SPJ11

x = 10 ounces,y = 23 ounces,and z = 42 ounces are the number of ounces of each kind of food should be used in a meal consisting of the three foods that allows exactly 660 calories, 25 grams of protein, and 425 milligrams of vitamin C.

Given Information:Three foods have the following nutritional content per ounce.

Goal:We need to find out how many ounces of each kind of food should be used in a meal consisting of the three foods that allows exactly 660 calories, 25 grams of protein, and 425 milligrams of vitamin C.

Step 1:Represent unknown quantities by variables.Let x, y, and z be the number of ounces of the first, second, and third food respectively.

Step 2:Translate from the verbal conditions of the problem to a system of three equations in three variables.As per the given information, the nutritional content per ounce for each of the three foods is given by the following table. Now, as per the problem, a meal consisting of the three foods allows exactly 660 calories, 25 grams of protein, and 425 milligrams of vitamin C.

Therefore, the system of three equations in three variables is given as follows;

x + 2y + 4z = 660     …(1)

6x + 8y + 2z = 25       …(2)

200x + 250y + 50z = 425  …(3)

Step 3:Solve the system of equations using any of the methods such as elimination, substitution, matrix, etc.

Let us solve the above system of equations by elimination method by eliminating z first.

Multiplying equation (1) by 2 and subtracting equation (2), we get,

2x - 2z = 610        …(4)

Multiplying equation (3) by 2 and subtracting equation (2), we get,

194x + 198y - 2z = 175   …(5)

Now, we have two equations (4) and (5) in terms of two variables x and z.

Let's eliminate z by multiplying equation (4) by 97 and adding it to equation (5) which gives,

194x + 198y - 2z = 175       …(5)

97(2x - 2z = 610)              …(4)------------------------------------------------------------------------------

490x + 196y = 6115

Dividing both sides by 2, we get,

245x + 98y = 3057  …(6)

Now, let us solve equation (1) for z.z = 330 - x/2 - 2y     …(7)

Substituting equation (7) into equation (5), we get,

194x + 198y - 2(330 - x/2 - 2y) = 175

Simplifying and solving for x, we get,x = 10 ounces.Substituting this value of x into equation (7), we get,

z = 65 - y      …(8)

Substituting the values of x and z from equations (7) and (8) into equation (1), we get,

5y = 115

Solving for y, we get,y = 23 ounces.

Therefore, x = 10 ounces,y = 23 ounces,and z = 42 ounces are the number of ounces of each kind of food should be used in a meal consisting of the three foods that allows exactly 660 calories, 25 grams of protein, and 425 milligrams of vitamin C.

To know more about ounces visit:

https://brainly.com/question/26950819

#SPJ11

The distance between the two planes at the end of 5 hours is approximately 3364.6 miles.

The question is asking for the distance between two planes, one flying due north at 464 mph for 5 hours and the other flying southeast at an angle 146° clockwise from due north at 405 mph for 5 hours.

To solve this, we can use the Law of Cosines.

The formula for the Law of Cosines is:

c² = a² + b² - 2ab cos(C), where a and b are the side lengths and C is the included angle of the triangle we are solving. In this case, the distance between the two planes is the side length we are solving for.

We can use the given velocities and times to calculate the distances each plane travels, and we can use the given angle to calculate the included angle between the two paths.

Then we can apply the Law of Cosines to find the distance between the two planes.

Distance of the first plane = 464 mph × 5 hours = 2320 miles

Distance of the second plane = 405 mph × 5 hours = 2025 miles

The angle between the two paths is 360° - 90° - 146° = 124°.

Now we can plug in the values into the formula:

c² = a² + b² - 2ab cos(C)

c² = 2320² + 2025² - 2(2320)(2025) cos(124°)

c² = 11320520.03

c ≈ 3364.6

Therefore, the distance between the two planes at the end of 5 hours is approximately 3364.6 miles.

Rounding this to the nearest whole number gives us the answer of 3365 miles.

To know more about distance visit:

https://brainly.com/question/13034462

#SPJ11